Skip to contentSkip to conversation

SPL DM

U-Boot Michal Simek 2 participants 4 messages Feb 3, 2015 – Feb 4, 2015

lore
Share & tools
lore
#0 lore raw

Hi Simon,

I am playing with driver model and I have moved uartlite to it and it is working fine for normal u-boot +10k but SPL size is dramatically bigger. Without DM I can fit to 3k but now it has ~16k.

microblaze-generic: all +10759 bss +4 data +560 rodata +1379 spl/u-boot-spl:all +9100 spl/u-boot-spl:bss -4 spl/u-boot-spl:data -48
spl/u-boot-spl:rodata +5660 spl/u-boot-spl:text +3492 text +8816

This 9k is after removing all printf calling which is adding 6kB.

common/malloc_simple.c +1 -1
index afdacff80d8e..a9e4d96738a0 100644
@@ -19,7 +19,7 @@ void *malloc_simple(size_t bytes)
 
        new_ptr = gd->malloc_ptr + bytes;
        if (new_ptr > gd->malloc_limit)
-               panic("Out of pre-reloc memory");
+               puts("Out of pre-reloc memory");
        ptr = map_sysmem(gd->malloc_base + gd->malloc_ptr, bytes);
        gd->malloc_ptr = ALIGN(new_ptr, sizeof(new_ptr));
        return ptr;
drivers/serial/serial-uclass.c +1 -1
index 3fc7104359d3..d56fafcb8ee2 100644
@@ -72,7 +72,7 @@ static void serial_find_console_or_panic(void)
        if (uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &dev) &&
            uclass_get_device(UCLASS_SERIAL, INDEX, &dev) &&
            (uclass_first_device(UCLASS_SERIAL, &dev) || !dev))
-               panic("No serial driver found");
+               puts("No serial driver found");
 #undef INDEX
        gd->cur_serial_dev = dev;
 }

Here is diff between versions. I have setup CONFIG_SYS_MALLOC_SIMPLE
Simon: Have you tried to to reduce size in this too?
Interesting part is that new uartlite functions are not called that's why I am expecting any other problem.

spl-u-boot-spl: add: 27/-13, grow: 2/-1 bytes: 4024/-576 (3448)
function old new delta
device_bind - 596 +596
device_probe_child - 508 +508
uclass_get - 296 +296
lists_bind_drivers - 212 +212
uclass_resolve_seq - 188 +188
uclass_bind_device - 180 +180
uclass_find_device_by_seq - 172 +172
device_bind_by_name - 152 +152
uclass_get_device_by_seq - 140 +140
serial_find_console_or_panic - 136 +136
uclass_find_device - 132 +132
lists_driver_lookup_name - 128 +128
uclass_first_device - 108 +108
dm_init - 96 +96
_serial_putc - 96 +96
uclass_unbind_device - 92 +92
malloc_simple - 92 +92
uclass_get_device - 88 +88
lists_uclass_lookup - 80 +80
dm_init_and_scan - 80 +80
calloc - 80 +80
uclass_find - 72 +72
uclass_pre_probe_child - 60 +60
uclass_post_probe_device - 52 +52
strcmp - 52 +52
dm_scan_platdata - 52 +52
serial_puts 44 80 +36
device_probe - 32 +32
board_init_r 232 248 +16
serial_current 4 - -4
userial0_setbrg 8 - -8
serial_init 56 48 -8
userial0_tstc 20 - -20
userial0_puts 32 - -32
userial0_putc 32 - -32
userial0_init 32 - -32
userial0_getc 32 - -32
uartlite_serial_getc 40 - -40
uartlite_serial0_device 48 - -48
uartlite_serial_init 52 - -52
uartlite_serial_puts 80 - -80
uartlite_serial_putc 92 - -92
get_current 96 - -96

Thanks,
Michal

Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150203/54407c84/attachment.sig>
#1 lore raw

Hi Michal,

Quoted 83 lines · Michal Simek

Hi Simon,

I am playing with driver model and I have moved uartlite to it and it is working fine for normal u-boot +10k but SPL size is dramatically bigger. Without DM I can fit to 3k but now it has ~16k.

microblaze-generic: all +10759 bss +4 data +560 rodata +1379 spl/u-boot-spl:all +9100 spl/u-boot-spl:bss -4 spl/u-boot-spl:data -48
spl/u-boot-spl:rodata +5660 spl/u-boot-spl:text +3492 text +8816

This 9k is after removing all printf calling which is adding 6kB.

common/malloc_simple.c +1 -1
index afdacff80d8e..a9e4d96738a0 100644
@@ -19,7 +19,7 @@ void *malloc_simple(size_t bytes)
 
        new_ptr = gd->malloc_ptr + bytes;
        if (new_ptr > gd->malloc_limit)
-               panic("Out of pre-reloc memory");
+               puts("Out of pre-reloc memory");
        ptr = map_sysmem(gd->malloc_base + gd->malloc_ptr, bytes);
        gd->malloc_ptr = ALIGN(new_ptr, sizeof(new_ptr));
        return ptr;
drivers/serial/serial-uclass.c +1 -1
index 3fc7104359d3..d56fafcb8ee2 100644
@@ -72,7 +72,7 @@ static void serial_find_console_or_panic(void)
        if (uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &dev) &&
            uclass_get_device(UCLASS_SERIAL, INDEX, &dev) &&
            (uclass_first_device(UCLASS_SERIAL, &dev) || !dev))
-               panic("No serial driver found");
+               puts("No serial driver found");
 #undef INDEX
        gd->cur_serial_dev = dev;
 }

Here is diff between versions. I have setup CONFIG_SYS_MALLOC_SIMPLE
Simon: Have you tried to to reduce size in this too?
Interesting part is that new uartlite functions are not called that's why I am expecting any other problem.

spl-u-boot-spl: add: 27/-13, grow: 2/-1 bytes: 4024/-576 (3448)
function old new delta
device_bind - 596 +596
device_probe_child - 508 +508
uclass_get - 296 +296
lists_bind_drivers - 212 +212
uclass_resolve_seq - 188 +188
uclass_bind_device - 180 +180
uclass_find_device_by_seq - 172 +172
device_bind_by_name - 152 +152
uclass_get_device_by_seq - 140 +140
serial_find_console_or_panic - 136 +136
uclass_find_device - 132 +132
lists_driver_lookup_name - 128 +128
uclass_first_device - 108 +108
dm_init - 96 +96
_serial_putc - 96 +96
uclass_unbind_device - 92 +92
malloc_simple - 92 +92
uclass_get_device - 88 +88
lists_uclass_lookup - 80 +80
dm_init_and_scan - 80 +80
calloc - 80 +80
uclass_find - 72 +72
uclass_pre_probe_child - 60 +60
uclass_post_probe_device - 52 +52
strcmp - 52 +52
dm_scan_platdata - 52 +52
serial_puts 44 80 +36
device_probe - 32 +32
board_init_r 232 248 +16
serial_current 4 - -4
userial0_setbrg 8 - -8
serial_init 56 48 -8
userial0_tstc 20 - -20
userial0_puts 32 - -32
userial0_putc 32 - -32

Quoted 8 lines

userial0_init 32 - -32
userial0_getc 32 - -32
uartlite_serial_getc 40 - -40
uartlite_serial0_device 48 - -48
uartlite_serial_init 52 - -52
uartlite_serial_puts 80 - -80
uartlite_serial_putc 92 - -92
get_current 96 - -96

I took a look at this quite recently and your numbers (4KB) are similar to mine - for ARM. I suppose. Actually on Tegra I see 5KB but I think that is due to GPIOs being used too. I expect Thumb will cut this by 20% or so.

There is also a bug in gcc which causes the rodata to blow up. You might be seeing that also.

https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54303

I just got a response with a possible patch on the gcc mailing list.

So this is very much work-in-progress. I see a few options:

1. Reduce functionality further, like the existing CONFIG_DM_WARN/DEVICE_REMOVE/STDIO but operating on things like device_bind/probe(). I have not seriously looked at this but I suspect it would be painful.

2. Support for static binding, i.e. declare a struct udevice directly, using const static init and perhaps some sort of macro to help thread tings together. Then we could add CONFIG_DM_BIND (to support binding new devices) and disable it for SPL. A bit ick but it might get us closer to running in a 4KB SRAM.

If you have ideas/patches please send them through. Right now I need to get Kconfig support v2 landed, and we still need a few more gdata patches before we can enable DM in SPL anyway (Tom is looking at that).

Regards,
Simon

#2 lore raw

Hi Simon,

Quoted 100 lines · Simon Glass

Hi Michal,

Quoted 83 lines · Michal Simek

Hi Simon,

I am playing with driver model and I have moved uartlite to it and it is working fine for normal u-boot +10k but SPL size is dramatically bigger. Without DM I can fit to 3k but now it has ~16k.

microblaze-generic: all +10759 bss +4 data +560 rodata +1379 spl/u-boot-spl:all +9100 spl/u-boot-spl:bss -4 spl/u-boot-spl:data -48
spl/u-boot-spl:rodata +5660 spl/u-boot-spl:text +3492 text +8816

This 9k is after removing all printf calling which is adding 6kB.

common/malloc_simple.c +1 -1
index afdacff80d8e..a9e4d96738a0 100644
@@ -19,7 +19,7 @@ void *malloc_simple(size_t bytes)
 
        new_ptr = gd->malloc_ptr + bytes;
        if (new_ptr > gd->malloc_limit)
-               panic("Out of pre-reloc memory");
+               puts("Out of pre-reloc memory");
        ptr = map_sysmem(gd->malloc_base + gd->malloc_ptr, bytes);
        gd->malloc_ptr = ALIGN(new_ptr, sizeof(new_ptr));
        return ptr;
drivers/serial/serial-uclass.c +1 -1
index 3fc7104359d3..d56fafcb8ee2 100644
@@ -72,7 +72,7 @@ static void serial_find_console_or_panic(void)
        if (uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &dev) &&
            uclass_get_device(UCLASS_SERIAL, INDEX, &dev) &&
            (uclass_first_device(UCLASS_SERIAL, &dev) || !dev))
-               panic("No serial driver found");
+               puts("No serial driver found");
 #undef INDEX
        gd->cur_serial_dev = dev;
 }

Here is diff between versions. I have setup CONFIG_SYS_MALLOC_SIMPLE
Simon: Have you tried to to reduce size in this too?
Interesting part is that new uartlite functions are not called that's why I am expecting any other problem.

spl-u-boot-spl: add: 27/-13, grow: 2/-1 bytes: 4024/-576 (3448)
function old new delta
device_bind - 596 +596
device_probe_child - 508 +508
uclass_get - 296 +296
lists_bind_drivers - 212 +212
uclass_resolve_seq - 188 +188
uclass_bind_device - 180 +180
uclass_find_device_by_seq - 172 +172
device_bind_by_name - 152 +152
uclass_get_device_by_seq - 140 +140
serial_find_console_or_panic - 136 +136
uclass_find_device - 132 +132
lists_driver_lookup_name - 128 +128
uclass_first_device - 108 +108
dm_init - 96 +96
_serial_putc - 96 +96
uclass_unbind_device - 92 +92
malloc_simple - 92 +92
uclass_get_device - 88 +88
lists_uclass_lookup - 80 +80
dm_init_and_scan - 80 +80
calloc - 80 +80
uclass_find - 72 +72
uclass_pre_probe_child - 60 +60
uclass_post_probe_device - 52 +52
strcmp - 52 +52
dm_scan_platdata - 52 +52
serial_puts 44 80 +36
device_probe - 32 +32
board_init_r 232 248 +16
serial_current 4 - -4
userial0_setbrg 8 - -8
serial_init 56 48 -8
userial0_tstc 20 - -20
userial0_puts 32 - -32
userial0_putc 32 - -32

Quoted 8 lines

userial0_init 32 - -32
userial0_getc 32 - -32
uartlite_serial_getc 40 - -40
uartlite_serial0_device 48 - -48
uartlite_serial_init 52 - -52
uartlite_serial_puts 80 - -80
uartlite_serial_putc 92 - -92
get_current 96 - -96

I took a look at this quite recently and your numbers (4KB) are similar to mine - for ARM. I suppose. Actually on Tegra I see 5KB but I think that is due to GPIOs being used too. I expect Thumb will cut this by 20% or so.

Quoted 6 lines

There is also a bug in gcc which causes the rodata to blow up. You might be seeing that also.

https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54303

I just got a response with a possible patch on the gcc mailing list.

I don't think this is a problem on microblaze - or at least can't see any problem related to that.

I put SPL to DDR and it is loading image from NOR flash and it is working with DM enabled.

U-Boot SPL 2015.04-rc1-00030-g705afe6b99a2 (Feb 03 2015 - 15:48:09)

U-Boot 2015.04-rc1-00030-g705afe6b99a2 (Feb 03 2015 - 15:48:09)

DRAM:  128 MiB
Flash: 32 MiB

*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   Xelite.40e00000

U-BOOT for Xilinx-SP605-AXI-lite-14.7

U-Boot-mONStR>
U-Boot-mONStR>

I have done some changes in SPL to support DM

Quoted 6 lines

So this is very much work-in-progress. I see a few options:

1. Reduce functionality further, like the existing CONFIG_DM_WARN/DEVICE_REMOVE/STDIO but operating on things like device_bind/probe(). I have not seriously looked at this but I suspect it would be painful.

DM_WARN is printf at the end - that's why disable it. DEVICE_REMOVE is disable for me - don't want to remove devices.

STDIO is disabled for SPL too.

Quoted 11 lines

2. Support for static binding, i.e. declare a struct udevice directly, using const static init and perhaps some sort of macro to help thread tings together. Then we could add CONFIG_DM_BIND (to support binding new devices) and disable it for SPL. A bit ick but it might get us closer to running in a 4KB SRAM.

If you have ideas/patches please send them through. Right now I need to get Kconfig support v2 landed, and we still need a few more gdata patches before we can enable DM in SPL anyway (Tom is looking at that).

The whole DM code is new for me but I will see what I can do with it. Definitely any example will be more then helpful

This is stat for the current version.

spl-u-boot-spl: add: 39/-11, grow: 4/-1 bytes: 4668/-444 (4224)
function old new delta
device_bind - 596 +596
device_probe_child - 508 +508
uclass_get - 296 +296
lists_bind_drivers - 212 +212
uclass_resolve_seq - 188 +188
uclass_bind_device - 180 +180
uclass_find_device_by_seq - 172 +172
device_bind_by_name - 152 +152
uclass_get_device_by_seq - 140 +140
serial_find_console_or_panic - 136 +136
uclass_find_device - 132 +132
lists_driver_lookup_name - 128 +128
memset - 124 +124
uclass_first_device - 108 +108
dm_init - 96 +96
_serial_putc - 96 +96
uclass_unbind_device - 92 +92
malloc_simple - 92 +92
uclass_get_device - 88 +88
lists_uclass_lookup - 80 +80
dm_init_and_scan - 80 +80
calloc - 80 +80
uclass_find - 72 +72
uartlite_serial_probe - 68 +68
_u_boot_list_2_driver_2_uartlite_serial - 68 +68
_u_boot_list_2_driver_2_root_driver - 68 +68
uartlite_serial_tstc - 64 +64
_u_boot_list_2_uclass_2_serial - 64 +64
_u_boot_list_2_uclass_2_root - 64 +64
uclass_pre_probe_child - 60 +60
serial_post_probe - 56 +56
uclass_post_probe_device - 52 +52
strcmp - 52 +52
dm_scan_platdata - 52 +52
serial_puts 44 80 +36
device_probe - 32 +32
dev_get_platdata - 20 +20
uartlite_serial_getc 40 56 +16
board_init_r 216 232 +16
uartlite_serial_putc 92 104 +12
serial_pre_remove - 8 +8
_u_boot_list_2_driver_info_2_uartlite0 - 8 +8
plat_uartlite_0 - 4 +4
serial_current 4 - -4
userial0_setbrg 8 - -8
serial_init 56 48 -8
userial0_tstc 20 - -20
userial0_puts 32 - -32
userial0_putc 32 - -32
userial0_init 32 - -32
userial0_getc 32 - -32
uartlite_serial0_device 48 - -48
uartlite_serial_init 52 - -52
uartlite_serial_puts 80 - -80
get_current 96 - -96

Thanks,
Michal

Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150203/a6a3d021/attachment.sig>
#3 lore raw

Hi Michal,

Quoted 106 lines · Michal Simek

Hi Simon,

Quoted 103 lines · Simon Glass

Hi Michal,

Quoted 83 lines · Michal Simek

Hi Simon,

I am playing with driver model and I have moved uartlite to it and it is working fine for normal u-boot +10k but SPL size is dramatically bigger. Without DM I can fit to 3k but now it has ~16k.

microblaze-generic: all +10759 bss +4 data +560 rodata +1379 spl/u-boot-spl:all +9100 spl/u-boot-spl:bss -4 spl/u-boot-spl:data -48
spl/u-boot-spl:rodata +5660 spl/u-boot-spl:text +3492 text +8816

This 9k is after removing all printf calling which is adding 6kB.

common/malloc_simple.c +1 -1
index afdacff80d8e..a9e4d96738a0 100644
@@ -19,7 +19,7 @@ void *malloc_simple(size_t bytes)
 
        new_ptr = gd->malloc_ptr + bytes;
        if (new_ptr > gd->malloc_limit)
-               panic("Out of pre-reloc memory");
+               puts("Out of pre-reloc memory");
        ptr = map_sysmem(gd->malloc_base + gd->malloc_ptr, bytes);
        gd->malloc_ptr = ALIGN(new_ptr, sizeof(new_ptr));
        return ptr;
drivers/serial/serial-uclass.c +1 -1
index 3fc7104359d3..d56fafcb8ee2 100644
@@ -72,7 +72,7 @@ static void serial_find_console_or_panic(void)
        if (uclass_get_device_by_seq(UCLASS_SERIAL, INDEX, &dev) &&
            uclass_get_device(UCLASS_SERIAL, INDEX, &dev) &&
            (uclass_first_device(UCLASS_SERIAL, &dev) || !dev))
-               panic("No serial driver found");
+               puts("No serial driver found");
 #undef INDEX
        gd->cur_serial_dev = dev;
 }

Here is diff between versions. I have setup CONFIG_SYS_MALLOC_SIMPLE
Simon: Have you tried to to reduce size in this too?
Interesting part is that new uartlite functions are not called that's why I am expecting any other problem.

spl-u-boot-spl: add: 27/-13, grow: 2/-1 bytes: 4024/-576 (3448)
function old new delta
device_bind - 596 +596
device_probe_child - 508 +508
uclass_get - 296 +296
lists_bind_drivers - 212 +212
uclass_resolve_seq - 188 +188
uclass_bind_device - 180 +180
uclass_find_device_by_seq - 172 +172
device_bind_by_name - 152 +152
uclass_get_device_by_seq - 140 +140
serial_find_console_or_panic - 136 +136
uclass_find_device - 132 +132
lists_driver_lookup_name - 128 +128
uclass_first_device - 108 +108
dm_init - 96 +96
_serial_putc - 96 +96
uclass_unbind_device - 92 +92
malloc_simple - 92 +92
uclass_get_device - 88 +88
lists_uclass_lookup - 80 +80
dm_init_and_scan - 80 +80
calloc - 80 +80
uclass_find - 72 +72
uclass_pre_probe_child - 60 +60
uclass_post_probe_device - 52 +52
strcmp - 52 +52
dm_scan_platdata - 52 +52
serial_puts 44 80 +36
device_probe - 32 +32
board_init_r 232 248 +16
serial_current 4 - -4
userial0_setbrg 8 - -8
serial_init 56 48 -8
userial0_tstc 20 - -20
userial0_puts 32 - -32
userial0_putc 32 - -32

Quoted 8 lines

userial0_init 32 - -32
userial0_getc 32 - -32
uartlite_serial_getc 40 - -40
uartlite_serial0_device 48 - -48
uartlite_serial_init 52 - -52
uartlite_serial_puts 80 - -80
uartlite_serial_putc 92 - -92
get_current 96 - -96

I took a look at this quite recently and your numbers (4KB) are similar to mine - for ARM. I suppose. Actually on Tegra I see 5KB but I think that is due to GPIOs being used too. I expect Thumb will cut this by 20% or so.

There is also a bug in gcc which causes the rodata to blow up. You might be seeing that also.

Quoted 6 lines
Quoted 3 lines

https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54303

I just got a response with a possible patch on the gcc mailing list.

I don't think this is a problem on microblaze - or at least can't see any problem related to that.

OK good.

Quoted 33 lines

I put SPL to DDR and it is loading image from NOR flash and it is working with DM enabled.

U-Boot SPL 2015.04-rc1-00030-g705afe6b99a2 (Feb 03 2015 - 15:48:09)

U-Boot 2015.04-rc1-00030-g705afe6b99a2 (Feb 03 2015 - 15:48:09)

DRAM:  128 MiB
Flash: 32 MiB

*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   Xelite.40e00000

U-BOOT for Xilinx-SP605-AXI-lite-14.7

U-Boot-mONStR>
U-Boot-mONStR>

I have done some changes in SPL to support DM

Quoted 6 lines

So this is very much work-in-progress. I see a few options:

1. Reduce functionality further, like the existing CONFIG_DM_WARN/DEVICE_REMOVE/STDIO but operating on things like device_bind/probe(). I have not seriously looked at this but I suspect it would be painful.

Quoted 4 lines

DM_WARN is printf at the end - that's why disable it. DEVICE_REMOVE is disable for me - don't want to remove devices.

STDIO is disabled for SPL too.

Yes these are the default.

Quoted 8 lines
Quoted 8 lines

2. Support for static binding, i.e. declare a struct udevice directly, using const static init and perhaps some sort of macro to help thread tings together. Then we could add CONFIG_DM_BIND (to support binding new devices) and disable it for SPL. A bit ick but it might get us closer to running in a 4KB SRAM.

Quoted 7 lines
Quoted 4 lines

If you have ideas/patches please send them through. Right now I need to get Kconfig support v2 landed, and we still need a few more gdata patches before we can enable DM in SPL anyway (Tom is looking at that).

The whole DM code is new for me but I will see what I can do with it. Definitely any example will be more then helpful

Well first start with an objective (i.e. what you want the side to be!).

See u-boot-dm/spl-working for current tegra approach.

Quoted 53 lines

This is stat for the current version.

spl-u-boot-spl: add: 39/-11, grow: 4/-1 bytes: 4668/-444 (4224)
function old new delta
device_bind - 596 +596
device_probe_child - 508 +508
uclass_get - 296 +296
lists_bind_drivers - 212 +212
uclass_resolve_seq - 188 +188
uclass_bind_device - 180 +180
uclass_find_device_by_seq - 172 +172
device_bind_by_name - 152 +152
uclass_get_device_by_seq - 140 +140
serial_find_console_or_panic - 136 +136
uclass_find_device - 132 +132
lists_driver_lookup_name - 128 +128
memset - 124 +124
uclass_first_device - 108 +108
dm_init - 96 +96
_serial_putc - 96 +96
uclass_unbind_device - 92 +92
malloc_simple - 92 +92
uclass_get_device - 88 +88
lists_uclass_lookup - 80 +80
dm_init_and_scan - 80 +80
calloc - 80 +80
uclass_find - 72 +72
uartlite_serial_probe - 68 +68
_u_boot_list_2_driver_2_uartlite_serial - 68 +68
_u_boot_list_2_driver_2_root_driver - 68 +68
uartlite_serial_tstc - 64 +64
_u_boot_list_2_uclass_2_serial - 64 +64
_u_boot_list_2_uclass_2_root - 64 +64
uclass_pre_probe_child - 60 +60
serial_post_probe - 56 +56
uclass_post_probe_device - 52 +52
strcmp - 52 +52
dm_scan_platdata - 52 +52
serial_puts 44 80 +36
device_probe - 32 +32
dev_get_platdata - 20 +20
uartlite_serial_getc 40 56 +16
board_init_r 216 232 +16
uartlite_serial_putc 92 104 +12
serial_pre_remove - 8 +8
_u_boot_list_2_driver_info_2_uartlite0 - 8 +8
plat_uartlite_0 - 4 +4
serial_current 4 - -4
userial0_setbrg 8 - -8
serial_init 56 48 -8
userial0_tstc 20 - -20

Quoted 8 lines

userial0_puts 32 - -32
userial0_putc 32 - -32
userial0_init 32 - -32
userial0_getc 32 - -32
uartlite_serial0_device 48 - -48
uartlite_serial_init 52 - -52
uartlite_serial_puts 80 - -80
get_current 96 - -96

Regards,
Simon