SPL DM
Hi Simon,
I am playing with driver model and I have moved uartlite to it and it is working fine for normal u-boot +10k but SPL size is dramatically bigger. Without DM I can fit to 3k but now it has ~16k.
microblaze-generic: all +10759 bss +4 data +560 rodata +1379 spl/u-boot-spl:all +9100 spl/u-boot-spl:bss -4 spl/u-boot-spl:data -48
spl/u-boot-spl:rodata +5660 spl/u-boot-spl:text +3492 text +8816
This 9k is after removing all printf calling which is adding 6kB.
common/malloc_simple.c +1 -1
@@ -19,7 +19,7 @@ void *malloc_simple(size_t bytes) new_ptr = gd->malloc_ptr + bytes;if (new_ptr > gd->malloc_limit) -panic ("Out of pre-reloc memory" ); +puts ("Out of pre-reloc memory" ); ptr =map_sysmem (gd->malloc_base + gd->malloc_ptr, bytes); gd->malloc_ptr =ALIGN (new_ptr,sizeof (new_ptr));return ptr;
drivers/serial/serial-uclass.c +1 -1
@@ -72,7 +72,7 @@ static void serial_find_console_or_panic(void)if (uclass_get_device_by_seq (UCLASS_SERIAL ,INDEX , &dev) &&uclass_get_device (UCLASS_SERIAL ,INDEX , &dev) && (uclass_first_device (UCLASS_SERIAL , &dev) || !dev)) -panic ("No serial driver found" ); +puts ("No serial driver found" );#undef INDEX gd->cur_serial_dev = dev; }
Here is diff between versions. I have setup CONFIG_SYS_MALLOC_SIMPLE
Simon: Have you tried to to reduce size in this too?
Interesting part is that new uartlite functions are not called that's why I am expecting any other problem.
spl-u-boot-spl: add: 27/-13, grow: 2/-1 bytes: 4024/-576 (3448)
function old new delta
device_bind - 596 +596
device_probe_child - 508 +508
uclass_get - 296 +296
lists_bind_drivers - 212 +212
uclass_resolve_seq - 188 +188
uclass_bind_device - 180 +180
uclass_find_device_by_seq - 172 +172
device_bind_by_name - 152 +152
uclass_get_device_by_seq - 140 +140
serial_find_console_or_panic - 136 +136
uclass_find_device - 132 +132
lists_driver_lookup_name - 128 +128
uclass_first_device - 108 +108
dm_init - 96 +96
_serial_putc - 96 +96
uclass_unbind_device - 92 +92
malloc_simple - 92 +92
uclass_get_device - 88 +88
lists_uclass_lookup - 80 +80
dm_init_and_scan - 80 +80
calloc - 80 +80
uclass_find - 72 +72
uclass_pre_probe_child - 60 +60
uclass_post_probe_device - 52 +52
strcmp - 52 +52
dm_scan_platdata - 52 +52
serial_puts 44 80 +36
device_probe - 32 +32
board_init_r 232 248 +16
serial_current 4 - -4
userial0_setbrg 8 - -8
serial_init 56 48 -8
userial0_tstc 20 - -20
userial0_puts 32 - -32
userial0_putc 32 - -32
userial0_init 32 - -32
userial0_getc 32 - -32
uartlite_serial_getc 40 - -40
uartlite_serial0_device 48 - -48
uartlite_serial_init 52 - -52
uartlite_serial_puts 80 - -80
uartlite_serial_putc 92 - -92
get_current 96 - -96
Thanks,
Michal
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150203/54407c84/attachment.sig>
Hi Michal,
Quoted 83 lines · Michal Simek
Hi Simon,
I am playing with driver model and I have moved uartlite to it and it is working fine for normal u-boot +10k but SPL size is dramatically bigger. Without DM I can fit to 3k but now it has ~16k.
microblaze-generic: all +10759 bss +4 data +560 rodata +1379 spl/u-boot-spl:all +9100 spl/u-boot-spl:bss -4 spl/u-boot-spl:data -48
spl/u-boot-spl:rodata +5660 spl/u-boot-spl:text +3492 text +8816This 9k is after removing all printf calling which is adding 6kB.
common/malloc_simple.c +1
-1@@ -19,7 +19,7 @@ void *malloc_simple(size_t bytes) new_ptr = gd->malloc_ptr + bytes;if (new_ptr > gd->malloc_limit) -panic ("Out of pre-reloc memory" ); +puts ("Out of pre-reloc memory" ); ptr =map_sysmem (gd->malloc_base + gd->malloc_ptr, bytes); gd->malloc_ptr =ALIGN (new_ptr,sizeof (new_ptr));return ptr;drivers/serial/serial-uclass.c +1
-1@@ -72,7 +72,7 @@ static void serial_find_console_or_panic(void)if (uclass_get_device_by_seq (UCLASS_SERIAL ,INDEX , &dev) &&uclass_get_device (UCLASS_SERIAL ,INDEX , &dev) && (uclass_first_device (UCLASS_SERIAL , &dev) || !dev)) -panic ("No serial driver found" ); +puts ("No serial driver found" );#undef INDEX gd->cur_serial_dev = dev; }Here is diff between versions. I have setup
CONFIG_SYS_MALLOC_SIMPLE
Simon: Have you tried to to reduce size in this too?
Interesting part is that new uartlite functions are not called that's why I am expecting any other problem.spl-u-boot-spl: add: 27/-13, grow: 2/-1 bytes: 4024/-576 (3448)
function old new delta
device_bind- 596 +596
device_probe_child- 508 +508
uclass_get- 296 +296
lists_bind_drivers- 212 +212
uclass_resolve_seq- 188 +188
uclass_bind_device- 180 +180
uclass_find_device_by_seq- 172 +172
device_bind_by_name- 152 +152
uclass_get_device_by_seq- 140 +140
serial_find_console_or_panic- 136 +136
uclass_find_device- 132 +132
lists_driver_lookup_name- 128 +128
uclass_first_device- 108 +108
dm_init- 96 +96
_serial_putc- 96 +96
uclass_unbind_device- 92 +92
malloc_simple- 92 +92
uclass_get_device- 88 +88
lists_uclass_lookup- 80 +80
dm_init_and_scan- 80 +80
calloc - 80 +80
uclass_find- 72 +72
uclass_pre_probe_child- 60 +60
uclass_post_probe_device- 52 +52
strcmp - 52 +52
dm_scan_platdata- 52 +52
serial_puts44 80 +36
device_probe- 32 +32
board_init_r232 248 +16
serial_current4 - -4
userial0_setbrg8 - -8
serial_init56 48 -8
userial0_tstc20 - -20
userial0_puts32 - -32
userial0_putc32 - -32
Quoted 8 lines
userial0_init32 - -32
userial0_getc32 - -32
uartlite_serial_getc40 - -40
uartlite_serial0_device48 - -48
uartlite_serial_init52 - -52
uartlite_serial_puts80 - -80
uartlite_serial_putc92 - -92
get_current96 - -96
I took a look at this quite recently and your numbers (4KB) are similar to mine - for ARM. I suppose. Actually on Tegra I see 5KB but I think that is due to GPIOs being used too. I expect Thumb will cut this by 20% or so.
There is also a bug in gcc which causes the rodata to blow up. You might be seeing that also.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54303
I just got a response with a possible patch on the gcc mailing list.
So this is very much work-in-progress. I see a few options:
1. Reduce functionality further, like the existing CONFIG_DM_WARN/DEVICE_REMOVE/STDIO but operating on things like device_bind/probe(). I have not seriously looked at this but I suspect it would be painful.
2. Support for static binding, i.e. declare a struct udevice directly, using const static init and perhaps some sort of macro to help thread tings together. Then we could add CONFIG_DM_BIND (to support binding new devices) and disable it for SPL. A bit ick but it might get us closer to running in a 4KB SRAM.
If you have ideas/patches please send them through. Right now I need to get Kconfig support v2 landed, and we still need a few more gdata patches before we can enable DM in SPL anyway (Tom is looking at that).
Regards,
Simon
Hi Simon,
Quoted 100 lines · Simon Glass
Hi Michal,
Quoted 83 lines · Michal Simek
Hi Simon,
I am playing with driver model and I have moved uartlite to it and it is working fine for normal u-boot +10k but SPL size is dramatically bigger. Without DM I can fit to 3k but now it has ~16k.
microblaze-generic: all +10759 bss +4 data +560 rodata +1379 spl/u-boot-spl:all +9100 spl/u-boot-spl:bss -4 spl/u-boot-spl:data -48
spl/u-boot-spl:rodata +5660 spl/u-boot-spl:text +3492 text +8816This 9k is after removing all printf calling which is adding 6kB.
common/malloc_simple.c +1
-1@@ -19,7 +19,7 @@ void *malloc_simple(size_t bytes) new_ptr = gd->malloc_ptr + bytes;if (new_ptr > gd->malloc_limit) -panic ("Out of pre-reloc memory" ); +puts ("Out of pre-reloc memory" ); ptr =map_sysmem (gd->malloc_base + gd->malloc_ptr, bytes); gd->malloc_ptr =ALIGN (new_ptr,sizeof (new_ptr));return ptr;drivers/serial/serial-uclass.c +1
-1@@ -72,7 +72,7 @@ static void serial_find_console_or_panic(void)if (uclass_get_device_by_seq (UCLASS_SERIAL ,INDEX , &dev) &&uclass_get_device (UCLASS_SERIAL ,INDEX , &dev) && (uclass_first_device (UCLASS_SERIAL , &dev) || !dev)) -panic ("No serial driver found" ); +puts ("No serial driver found" );#undef INDEX gd->cur_serial_dev = dev; }Here is diff between versions. I have setup
CONFIG_SYS_MALLOC_SIMPLE
Simon: Have you tried to to reduce size in this too?
Interesting part is that new uartlite functions are not called that's why I am expecting any other problem.spl-u-boot-spl: add: 27/-13, grow: 2/-1 bytes: 4024/-576 (3448)
function old new delta
device_bind- 596 +596
device_probe_child- 508 +508
uclass_get- 296 +296
lists_bind_drivers- 212 +212
uclass_resolve_seq- 188 +188
uclass_bind_device- 180 +180
uclass_find_device_by_seq- 172 +172
device_bind_by_name- 152 +152
uclass_get_device_by_seq- 140 +140
serial_find_console_or_panic- 136 +136
uclass_find_device- 132 +132
lists_driver_lookup_name- 128 +128
uclass_first_device- 108 +108
dm_init- 96 +96
_serial_putc- 96 +96
uclass_unbind_device- 92 +92
malloc_simple- 92 +92
uclass_get_device- 88 +88
lists_uclass_lookup- 80 +80
dm_init_and_scan- 80 +80
calloc - 80 +80
uclass_find- 72 +72
uclass_pre_probe_child- 60 +60
uclass_post_probe_device- 52 +52
strcmp - 52 +52
dm_scan_platdata- 52 +52
serial_puts44 80 +36
device_probe- 32 +32
board_init_r232 248 +16
serial_current4 - -4
userial0_setbrg8 - -8
serial_init56 48 -8
userial0_tstc20 - -20
userial0_puts32 - -32
userial0_putc32 - -32Quoted 8 lines
userial0_init32 - -32
userial0_getc32 - -32
uartlite_serial_getc40 - -40
uartlite_serial0_device48 - -48
uartlite_serial_init52 - -52
uartlite_serial_puts80 - -80
uartlite_serial_putc92 - -92
get_current96 - -96I took a look at this quite recently and your numbers (4KB) are similar to mine - for ARM. I suppose. Actually on Tegra I see 5KB but I think that is due to GPIOs being used too. I expect Thumb will cut this by 20% or so.
Quoted 6 lines
There is also a bug in gcc which causes the rodata to blow up. You might be seeing that also.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54303
I just got a response with a possible patch on the gcc mailing list.
I don't think this is a problem on microblaze - or at least can't see any problem related to that.
I put SPL to DDR and it is loading image from NOR flash and it is working with DM enabled.
U-Boot SPL 2015.04-rc1-00030-g705afe6b99a2 (Feb 03 2015 - 15:48:09)
U-Boot 2015.04-rc1-00030-g705afe6b99a2 (Feb 03 2015 - 15:48:09)
DRAM: 128 MiB Flash: 32 MiB
*** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Net: Xelite.40e00000
U-BOOT for Xilinx-SP605-AXI-lite-14.7
U-Boot-mONStR>
U-Boot-mONStR>
I have done some changes in SPL to support DM
Quoted 6 lines
So this is very much work-in-progress. I see a few options:
1. Reduce functionality further, like the existing CONFIG_DM_WARN/DEVICE_REMOVE/STDIO but operating on things like device_bind/probe(). I have not seriously looked at this but I suspect it would be painful.
DM_WARN is printf at the end - that's why disable it. DEVICE_REMOVE is disable for me - don't want to remove devices.
STDIO is disabled for SPL too.
Quoted 11 lines
2. Support for static binding, i.e. declare a struct udevice directly, using const static init and perhaps some sort of macro to help thread tings together. Then we could add
CONFIG_DM_BIND(to support binding new devices) and disable it for SPL. A bit ick but it might get us closer to running in a 4KB SRAM.If you have ideas/patches please send them through. Right now I need to get
Kconfigsupport v2 landed, and we still need a few more gdata patches before we can enable DM in SPL anyway (Tom is looking at that).
The whole DM code is new for me but I will see what I can do with it. Definitely any example will be more then helpful
This is stat for the current version.
spl-u-boot-spl: add: 39/-11, grow: 4/-1 bytes: 4668/-444 (4224)
function old new delta
device_bind - 596 +596
device_probe_child - 508 +508
uclass_get - 296 +296
lists_bind_drivers - 212 +212
uclass_resolve_seq - 188 +188
uclass_bind_device - 180 +180
uclass_find_device_by_seq - 172 +172
device_bind_by_name - 152 +152
uclass_get_device_by_seq - 140 +140
serial_find_console_or_panic - 136 +136
uclass_find_device - 132 +132
lists_driver_lookup_name - 128 +128
memset - 124 +124
uclass_first_device - 108 +108
dm_init - 96 +96
_serial_putc - 96 +96
uclass_unbind_device - 92 +92
malloc_simple - 92 +92
uclass_get_device - 88 +88
lists_uclass_lookup - 80 +80
dm_init_and_scan - 80 +80
calloc - 80 +80
uclass_find - 72 +72
uartlite_serial_probe - 68 +68
_u_boot_list_2_driver_2_uartlite_serial - 68 +68
_u_boot_list_2_driver_2_root_driver - 68 +68
uartlite_serial_tstc - 64 +64
_u_boot_list_2_uclass_2_serial - 64 +64
_u_boot_list_2_uclass_2_root - 64 +64
uclass_pre_probe_child - 60 +60
serial_post_probe - 56 +56
uclass_post_probe_device - 52 +52
strcmp - 52 +52
dm_scan_platdata - 52 +52
serial_puts 44 80 +36
device_probe - 32 +32
dev_get_platdata - 20 +20
uartlite_serial_getc 40 56 +16
board_init_r 216 232 +16
uartlite_serial_putc 92 104 +12
serial_pre_remove - 8 +8
_u_boot_list_2_driver_info_2_uartlite0 - 8 +8
plat_uartlite_0 - 4 +4
serial_current 4 - -4
userial0_setbrg 8 - -8
serial_init 56 48 -8
userial0_tstc 20 - -20
userial0_puts 32 - -32
userial0_putc 32 - -32
userial0_init 32 - -32
userial0_getc 32 - -32
uartlite_serial0_device 48 - -48
uartlite_serial_init 52 - -52
uartlite_serial_puts 80 - -80
get_current 96 - -96
Thanks,
Michal
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150203/a6a3d021/attachment.sig>
Hi Michal,
Quoted 106 lines · Michal Simek
Hi Simon,
Quoted 103 lines · Simon Glass
Hi Michal,
Quoted 83 lines · Michal Simek
Hi Simon,
I am playing with driver model and I have moved uartlite to it and it is working fine for normal u-boot +10k but SPL size is dramatically bigger. Without DM I can fit to 3k but now it has ~16k.
microblaze-generic: all +10759 bss +4 data +560 rodata +1379 spl/u-boot-spl:all +9100 spl/u-boot-spl:bss -4 spl/u-boot-spl:data -48
spl/u-boot-spl:rodata +5660 spl/u-boot-spl:text +3492 text +8816This 9k is after removing all printf calling which is adding 6kB.
common/malloc_simple.c +1
-1@@ -19,7 +19,7 @@ void *malloc_simple(size_t bytes) new_ptr = gd->malloc_ptr + bytes;if (new_ptr > gd->malloc_limit) -panic ("Out of pre-reloc memory" ); +puts ("Out of pre-reloc memory" ); ptr =map_sysmem (gd->malloc_base + gd->malloc_ptr, bytes); gd->malloc_ptr =ALIGN (new_ptr,sizeof (new_ptr));return ptr;drivers/serial/serial-uclass.c +1
-1@@ -72,7 +72,7 @@ static void serial_find_console_or_panic(void)if (uclass_get_device_by_seq (UCLASS_SERIAL ,INDEX , &dev) &&uclass_get_device (UCLASS_SERIAL ,INDEX , &dev) && (uclass_first_device (UCLASS_SERIAL , &dev) || !dev)) -panic ("No serial driver found" ); +puts ("No serial driver found" );#undef INDEX gd->cur_serial_dev = dev; }Here is diff between versions. I have setup
CONFIG_SYS_MALLOC_SIMPLE
Simon: Have you tried to to reduce size in this too?
Interesting part is that new uartlite functions are not called that's why I am expecting any other problem.spl-u-boot-spl: add: 27/-13, grow: 2/-1 bytes: 4024/-576 (3448)
function old new delta
device_bind- 596 +596
device_probe_child- 508 +508
uclass_get- 296 +296
lists_bind_drivers- 212 +212
uclass_resolve_seq- 188 +188
uclass_bind_device- 180 +180
uclass_find_device_by_seq- 172 +172
device_bind_by_name- 152 +152
uclass_get_device_by_seq- 140 +140
serial_find_console_or_panic- 136 +136
uclass_find_device- 132 +132
lists_driver_lookup_name- 128 +128
uclass_first_device- 108 +108
dm_init- 96 +96
_serial_putc- 96 +96
uclass_unbind_device- 92 +92
malloc_simple- 92 +92
uclass_get_device- 88 +88
lists_uclass_lookup- 80 +80
dm_init_and_scan- 80 +80
calloc - 80 +80
uclass_find- 72 +72
uclass_pre_probe_child- 60 +60
uclass_post_probe_device- 52 +52
strcmp - 52 +52
dm_scan_platdata- 52 +52
serial_puts44 80 +36
device_probe- 32 +32
board_init_r232 248 +16
serial_current4 - -4
userial0_setbrg8 - -8
serial_init56 48 -8
userial0_tstc20 - -20
userial0_puts32 - -32
userial0_putc32 - -32Quoted 8 lines
userial0_init32 - -32
userial0_getc32 - -32
uartlite_serial_getc40 - -40
uartlite_serial0_device48 - -48
uartlite_serial_init52 - -52
uartlite_serial_puts80 - -80
uartlite_serial_putc92 - -92
get_current96 - -96I took a look at this quite recently and your numbers (4KB) are similar to mine - for ARM. I suppose. Actually on Tegra I see 5KB but I think that is due to GPIOs being used too. I expect Thumb will cut this by 20% or so.
There is also a bug in gcc which causes the rodata to blow up. You might be seeing that also.
Quoted 6 lines
Quoted 3 lines
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54303
I just got a response with a possible patch on the gcc mailing list.
I don't think this is a problem on microblaze - or at least can't see any problem related to that.
OK good.
Quoted 33 lines
I put SPL to DDR and it is loading image from NOR flash and it is working with DM enabled.
U-Boot SPL 2015.04-rc1-00030-g705afe6b99a2 (Feb 03 2015 - 15:48:09)
U-Boot 2015.04-rc1-00030-g705afe6b99a2 (Feb 03 2015 - 15:48:09)
DRAM: 128 MiB Flash: 32 MiB*** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Net: Xelite.40e00000U-BOOT for Xilinx-SP605-AXI-lite-14.7
U-Boot-mONStR>
U-Boot-mONStR>I have done some changes in SPL to support DM
Quoted 6 lines
So this is very much work-in-progress. I see a few options:
1. Reduce functionality further, like the existing CONFIG_DM_WARN/DEVICE_REMOVE/STDIO but operating on things like device_bind/probe(). I have not seriously looked at this but I suspect it would be painful.
Quoted 4 lines
DM_WARNis printf at the end - that's why disable it.DEVICE_REMOVEis disable for me - don't want to remove devices.STDIO is disabled for SPL too.
Yes these are the default.
Quoted 8 lines
Quoted 8 lines
2. Support for static binding, i.e. declare a struct udevice directly, using const static init and perhaps some sort of macro to help thread tings together. Then we could add
CONFIG_DM_BIND(to support binding new devices) and disable it for SPL. A bit ick but it might get us closer to running in a 4KB SRAM.
Quoted 7 lines
Quoted 4 lines
If you have ideas/patches please send them through. Right now I need to get
Kconfigsupport v2 landed, and we still need a few more gdata patches before we can enable DM in SPL anyway (Tom is looking at that).The whole DM code is new for me but I will see what I can do with it. Definitely any example will be more then helpful
Well first start with an objective (i.e. what you want the side to be!).
See u-boot-dm/spl-working for current tegra approach.
Quoted 53 lines
This is stat for the current version.
spl-u-boot-spl: add: 39/-11, grow: 4/-1 bytes: 4668/-444 (4224)
function old new delta
device_bind- 596 +596
device_probe_child- 508 +508
uclass_get- 296 +296
lists_bind_drivers- 212 +212
uclass_resolve_seq- 188 +188
uclass_bind_device- 180 +180
uclass_find_device_by_seq- 172 +172
device_bind_by_name- 152 +152
uclass_get_device_by_seq- 140 +140
serial_find_console_or_panic- 136 +136
uclass_find_device- 132 +132
lists_driver_lookup_name- 128 +128
memset - 124 +124
uclass_first_device- 108 +108
dm_init- 96 +96
_serial_putc- 96 +96
uclass_unbind_device- 92 +92
malloc_simple- 92 +92
uclass_get_device- 88 +88
lists_uclass_lookup- 80 +80
dm_init_and_scan- 80 +80
calloc - 80 +80
uclass_find- 72 +72
uartlite_serial_probe- 68 +68
_u_boot_list_2_driver_2_uartlite_serial- 68 +68
_u_boot_list_2_driver_2_root_driver- 68 +68
uartlite_serial_tstc- 64 +64
_u_boot_list_2_uclass_2_serial- 64 +64
_u_boot_list_2_uclass_2_root- 64 +64
uclass_pre_probe_child- 60 +60
serial_post_probe- 56 +56
uclass_post_probe_device- 52 +52
strcmp - 52 +52
dm_scan_platdata- 52 +52
serial_puts44 80 +36
device_probe- 32 +32
dev_get_platdata- 20 +20
uartlite_serial_getc40 56 +16
board_init_r216 232 +16
uartlite_serial_putc92 104 +12
serial_pre_remove- 8 +8
_u_boot_list_2_driver_info_2_uartlite0- 8 +8
plat_uartlite_0- 4 +4
serial_current4 - -4
userial0_setbrg8 - -8
serial_init56 48 -8
userial0_tstc20 - -20
Quoted 8 lines
userial0_puts32 - -32
userial0_putc32 - -32
userial0_init32 - -32
userial0_getc32 - -32
uartlite_serial0_device48 - -48
uartlite_serial_init52 - -52
uartlite_serial_puts80 - -80
get_current96 - -96
Regards,
Simon