Ask for help: Compulab CM-510 U-boot version: Load Kernel from SD-Card
Hello,
I am trying to boot the kernel image from SD-CARD (mmc0) in the CM-510 SoM(provided by Compulab) using the u-boot image provided by Compulab:
http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres
By default, it seems SD-Card is not enabled, so I think I have to configure right the MPP option.
I have searched over and over in the code sources, I have change some arrays defined in some files that are related to the MPP (pinmux) but nothing happens:
./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.h:
* DB-88F6781-BP B0 */
#define DB_88AP510BP_B_MPP0_7 0x00000000
#define DB_88AP510BP_B_MPP8_15 0x00442000
#define DB_88AP510BP_B_MPP16_23 0x32334043 <---
#define DB_88AP510BP_B_MPP24_31 0x11111111
#define DB_88AP510BP_B_MPP32_39 0x11111111
#define DB_88AP510BP_B_MPP40_47 0x11111111 <---
#define DB_88AP510BP_B_MPP48_55 0x11111111
#define DB_88AP510BP_B_MPP56_63 0x00111111
#define DB_88AP510BP_B_OE_LOW (~((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT14)|(BIT15)|(BIT16)|(BIT18)|(BIT19)))
#define DB_88AP510BP_B_OE_HIGH 0x0FFFFFFF
#define DB_88AP510BP_B_OE_VAL_LOW ((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT16)|(BIT18)|(BIT19))
#define DB_88AP510BP_B_OE_VAL_HIGH 0x0
./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c:MV_BOARD_MPP_INFO db88f6781bpbInfoBoardMppConfigValue[] =
{{{{
DB_88AP510BP_B_MPP0_7,
DB_88AP510BP_B_MPP8_15,
DB_88AP510BP_B_MPP16_23,
DB_88AP510BP_B_MPP40_47 <-------
}}}};Anyone has faced this problem before? I really appreciate some kind of help.
Best regards,
Gabriel
Hi Gabriel,
Try fixing CM-A510 related code:
mvBoardEnvSpec.h
...
...
/* CM-A510 */
#define CM_A510_MPP0_7 0x00000033 #define CM_A510_MPP8_15 0x00445050 #define CM_A510_MPP16_23 0x66664040 #define CM_A510_MPP24_31 0x11111111 #define CM_A510_MPP32_39 0x11111111 #define CM_A510_MPP40_47 0x11111111 #define CM_A510_MPP48_55 0x11111111 #define CM_A510_MPP56_63 0x00111111
...
board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c
...
...MV_BOARD_MPP_INFO cm_a510InfoBoardMppConfigValue[]
...
Regards,
Dmitry
Quoted 58 lines · Gabriel Dobato
Hello,
I am trying to boot the kernel image from SD-CARD (mmc0) in the CM-510 SoM(provided by Compulab) using the u-boot image provided by Compulab:
http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres
By default, it seems SD-Card is not enabled, so I think I have to configure right the MPP option.
I have searched over and over in the code sources, I have change some arrays defined in some files that are related to the MPP (pinmux) but nothing happens:
./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.h:* DB-88F6781-BP B0 */
#defineDB_88AP510BP_B_MPP0_70x00000000
#defineDB_88AP510BP_B_MPP8_150x00442000#define DB_88AP510BP_B_MPP16_23 0x32334043 <--- #define DB_88AP510BP_B_MPP24_31 0x11111111 #define DB_88AP510BP_B_MPP32_39 0x11111111 #define DB_88AP510BP_B_MPP40_47 0x11111111 <--- #define DB_88AP510BP_B_MPP48_55 0x11111111 #define DB_88AP510BP_B_MPP56_63 0x00111111#define
DB_88AP510BP_B_OE_LOW(~((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT14)|(BIT15)|(BIT16)|(BIT18)|(BIT19)))#define
DB_88AP510BP_B_OE_HIGH0x0FFFFFFF
#defineDB_88AP510BP_B_OE_VAL_LOW((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT16)|(BIT18)|(BIT19))#define
DB_88AP510BP_B_OE_VAL_HIGH0x0
./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c:MV_BOARD_MPP_INFOdb88f6781bpbInfoBoardMppConfigValue[] ={{{{ DB_88AP510BP_B_MPP0_7, DB_88AP510BP_B_MPP8_15, DB_88AP510BP_B_MPP16_23, DB_88AP510BP_B_MPP40_47 <------- }}}};Anyone has faced this problem before? I really appreciate some kind of help.
Best regards,
Gabriel
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
HI Dmitry,
Thank you very much for your answer!
I have tried it, but I get the same:
CM-A510>> mmc init
CM-A510>> mmcinfo 0
Device: MV_SDHCI
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0
Bus Width: 0-bit
In reference to peripherals, only is available USB and Ethernet 0 by default. I am searching in the sources just in case there is something else... but I am afraid I will not find something.
Quoted 3 lines
Quoted 3 lines
#define CM_A510_MPP0_7 0x00000033 #define CM_A510_MPP8_15 0x00445050 #define CM_A510_MPP16_23 0x66664040
By the way, how do you get that resgisters? In my case, I tried to define them as per as Marvell 88AP510 Specification reference. Is it the right place?
Best regards,
Gabriel
Quoted 99 lines · Dmitry Lifshitz
Hi Gabriel,
Try fixing CM-A510 related code:
mvBoardEnvSpec.h...
.../* CM-A510 */
#define CM_A510_MPP0_7 0x00000033 #define CM_A510_MPP8_15 0x00445050 #define CM_A510_MPP16_23 0x66664040 #define CM_A510_MPP24_31 0x11111111 #define CM_A510_MPP32_39 0x11111111 #define CM_A510_MPP40_47 0x11111111 #define CM_A510_MPP48_55 0x11111111 #define CM_A510_MPP56_63 0x00111111...
board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c...
...MV_BOARD_MPP_INFOcm_a510InfoBoardMppConfigValue[]...
Regards,
Dmitry
Quoted 60 lines · Gabriel Dobato
Hello,
I am trying to boot the kernel image from SD-CARD (mmc0) in the CM-510 SoM(provided by Compulab) using the u-boot image provided by Compulab:
http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres
By default, it seems SD-Card is not enabled, so I think I have to configure right the MPP option.
I have searched over and over in the code sources, I have change some arrays defined in some files that are related to the MPP (pinmux) but nothing happens:
./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.h:* DB-88F6781-BP B0 */
#defineDB_88AP510BP_B_MPP0_70x00000000
#defineDB_88AP510BP_B_MPP8_150x00442000#define DB_88AP510BP_B_MPP16_23 0x32334043 <--- #define DB_88AP510BP_B_MPP24_31 0x11111111 #define DB_88AP510BP_B_MPP32_39 0x11111111 #define DB_88AP510BP_B_MPP40_47 0x11111111 <--- #define DB_88AP510BP_B_MPP48_55 0x11111111 #define DB_88AP510BP_B_MPP56_63 0x00111111#define
DB_88AP510BP_B_OE_LOW(~((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT14)|(BIT15)|(BIT16)|(BIT18)|(BIT19)))#define
DB_88AP510BP_B_OE_HIGH0x0FFFFFFF
#defineDB_88AP510BP_B_OE_VAL_LOW((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT16)|(BIT18)|(BIT19))#define
DB_88AP510BP_B_OE_VAL_HIGH0x0
./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c:MV_BOARD_MPP_INFOdb88f6781bpbInfoBoardMppConfigValue[] ={{{{ DB_88AP510BP_B_MPP0_7, DB_88AP510BP_B_MPP8_15, DB_88AP510BP_B_MPP16_23, DB_88AP510BP_B_MPP40_47 <------- }}}};Anyone has faced this problem before? I really appreciate some kind of help.
Best regards,
Gabriel
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Gabriel,
Quoted 18 lines · Gabriel Dobato
HI Dmitry,
Thank you very much for your answer!
I have tried it, but I get the same:
CM-A510>> mmc init
CM-A510>> mmcinfo 0
Device:MV_SDHCI
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0
Bus Width: 0-bit
Quoted 8 lines
In reference to peripherals, only is available USB and Ethernet 0 by default. I am searching in the sources just in case there is something else... but I am afraid I will not find something.
Quoted 3 lines
Quoted 3 lines
#define CM_A510_MPP0_7 0x00000033 #define CM_A510_MPP8_15 0x00445050 #define CM_A510_MPP16_23 0x66664040
We forked from DB88AP510-A-P dev board code. Apply the patches from the latest CM-A510 U-Boot package
(http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres)
to see the changes log and build instructions.
Quoted 7 lines
By the way, how do you get that resgisters? In my case, I tried to define them as per as Marvell 88AP510 Specification reference. Is it the right place?
Best regards,
Gabriel
Regards,
Dmitry
Hi Dmitry,
Finally, I got the SD Card as a bootable kernel space. However I had to set the registers as below:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
#define
CM_A510_MPP0_70x00000033(does not
matter)
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
#define
CM_A510_MPP8_150x00445050(does not
matter)
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
#define
CM_A510_MPP16_230x33333333<----
(SDIO0 and SDIO1)
Regards,
Gabriel
Quoted 47 lines · Dmitry Lifshitz
Hi Gabriel,
Quoted 18 lines · Gabriel Dobato
HI Dmitry,
Thank you very much for your answer!
I have tried it, but I get the same:
CM-A510>> mmc init
CM-A510>> mmcinfo 0
Device:MV_SDHCI
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0
Bus Width: 0-bitQuoted 8 lines
In reference to peripherals, only is available USB and Ethernet 0 by default. I am searching in the sources just in case there is something else... but I am afraid I will not find something.
Quoted 3 lines
Quoted 3 lines
#define CM_A510_MPP0_7 0x00000033 #define CM_A510_MPP8_15 0x00445050 #define CM_A510_MPP16_23 0x66664040We forked from DB88AP510-A-P dev board code. Apply the patches from the latest CM-A510 U-Boot package
(http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres)
to see the changes log and build instructions.Quoted 7 lines
By the way, how do you get that resgisters? In my case, I tried to define them as per as Marvell 88AP510 Specification reference. Is it the right place?
Best regards,
Gabriel
Regards,
Dmitry
Hi Gabriel,
Sorry for the late reply.
I see you made a progress with that issue.
Thank you for sharing the results.
Best regards,
Dmitry
Quoted 69 lines · Gabriel Dobato
Hi Dmitry,
Finally, I got the SD Card as a bootable kernel space. However I had to set the registers as below:
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
#define
CM_A510_MPP0_70x00000033(does notmatter)
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
#define
CM_A510_MPP8_150x00445050(does notmatter)
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
#define
CM_A510_MPP16_230x33333333<----(SDIO0 and SDIO1)
Regards,
Gabriel
Quoted 47 lines · Dmitry Lifshitz
Hi Gabriel,
Quoted 18 lines · Gabriel Dobato
HI Dmitry,
Thank you very much for your answer!
I have tried it, but I get the same:
CM-A510>> mmc init
CM-A510>> mmcinfo 0
Device:MV_SDHCI
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0
Bus Width: 0-bitQuoted 8 lines
In reference to peripherals, only is available USB and Ethernet 0 by default. I am searching in the sources just in case there is something else... but I am afraid I will not find something.
Quoted 3 lines
Quoted 3 lines
#define CM_A510_MPP0_7 0x00000033 #define CM_A510_MPP8_15 0x00445050 #define CM_A510_MPP16_23 0x66664040We forked from DB88AP510-A-P dev board code. Apply the patches from the latest CM-A510 U-Boot package
(http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres)
to see the changes log and build instructions.Quoted 7 lines
By the way, how do you get that resgisters? In my case, I tried to define them as per as Marvell 88AP510 Specification reference. Is it the right place?
Best regards,
Gabriel
Regards,
Dmitry