Skip to contentSkip to conversation

Ask for help: Compulab CM-510 U-boot version: Load Kernel from SD-Card

U-Boot Gabriel Dobato 2 participants 6 messages Mar 3, 2015 – Mar 15, 2015

lore
Share & tools
lore
#0 lore raw

Hello,

I am trying to boot the kernel image from SD-CARD (mmc0) in the CM-510 SoM(provided by Compulab) using the u-boot image provided by Compulab:

http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres

By default, it seems SD-Card is not enabled, so I think I have to configure right the MPP option.

I have searched over and over in the code sources, I have change some arrays defined in some files that are related to the MPP (pinmux) but nothing happens:

./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.h:

* DB-88F6781-BP B0 */
#define DB_88AP510BP_B_MPP0_7 0x00000000
#define DB_88AP510BP_B_MPP8_15 0x00442000
#define DB_88AP510BP_B_MPP16_23 0x32334043 <---
#define DB_88AP510BP_B_MPP24_31 0x11111111
#define DB_88AP510BP_B_MPP32_39 0x11111111
#define DB_88AP510BP_B_MPP40_47 0x11111111 <---
#define DB_88AP510BP_B_MPP48_55 0x11111111
#define DB_88AP510BP_B_MPP56_63 0x00111111
#define DB_88AP510BP_B_OE_LOW (~((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT14)|(BIT15)|(BIT16)|(BIT18)|(BIT19)))
#define DB_88AP510BP_B_OE_HIGH 0x0FFFFFFF
#define DB_88AP510BP_B_OE_VAL_LOW ((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT16)|(BIT18)|(BIT19))
#define DB_88AP510BP_B_OE_VAL_HIGH 0x0

./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c:
MV_BOARD_MPP_INFO db88f6781bpbInfoBoardMppConfigValue[] =

	{{{{
	DB_88AP510BP_B_MPP0_7,		
	DB_88AP510BP_B_MPP8_15,		
	DB_88AP510BP_B_MPP16_23,
	DB_88AP510BP_B_MPP40_47	    <-------
	}}}};

Anyone has faced this problem before? I really appreciate some kind of help.

Best regards,

Gabriel

#1 lore raw

Hi Gabriel,

Try fixing CM-A510 related code:

mvBoardEnvSpec.h

...
...

/* CM-A510 */

#define CM_A510_MPP0_7                                 0x00000033
#define CM_A510_MPP8_15                                0x00445050
#define CM_A510_MPP16_23                               0x66664040
#define CM_A510_MPP24_31                               0x11111111
#define CM_A510_MPP32_39                               0x11111111
#define CM_A510_MPP40_47                               0x11111111
#define CM_A510_MPP48_55                               0x11111111
#define CM_A510_MPP56_63                               0x00111111

...

board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c

...
...
MV_BOARD_MPP_INFO cm_a510InfoBoardMppConfigValue[]

...

Regards,

Dmitry

Quoted 58 lines · Gabriel Dobato

Hello,

I am trying to boot the kernel image from SD-CARD (mmc0) in the CM-510 SoM(provided by Compulab) using the u-boot image provided by Compulab:

http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres

By default, it seems SD-Card is not enabled, so I think I have to configure right the MPP option.

I have searched over and over in the code sources, I have change some arrays defined in some files that are related to the MPP (pinmux) but nothing happens:

./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.h:

* DB-88F6781-BP B0 */
#define DB_88AP510BP_B_MPP0_7 0x00000000
#define DB_88AP510BP_B_MPP8_15 0x00442000

#define DB_88AP510BP_B_MPP16_23            0x32334043   <---
#define DB_88AP510BP_B_MPP24_31            0x11111111
#define DB_88AP510BP_B_MPP32_39            0x11111111
#define DB_88AP510BP_B_MPP40_47            0x11111111   <---
#define DB_88AP510BP_B_MPP48_55            0x11111111
#define DB_88AP510BP_B_MPP56_63            0x00111111

#define DB_88AP510BP_B_OE_LOW (~((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT14)|(BIT15)|(BIT16)|(BIT18)|(BIT19)))

#define DB_88AP510BP_B_OE_HIGH 0x0FFFFFFF
#define DB_88AP510BP_B_OE_VAL_LOW ((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT16)|(BIT18)|(BIT19))

#define DB_88AP510BP_B_OE_VAL_HIGH 0x0

./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c:
MV_BOARD_MPP_INFO db88f6781bpbInfoBoardMppConfigValue[] =

     {{{{
     DB_88AP510BP_B_MPP0_7,
     DB_88AP510BP_B_MPP8_15,
     DB_88AP510BP_B_MPP16_23,
     DB_88AP510BP_B_MPP40_47        <-------
     }}}};

Anyone has faced this problem before? I really appreciate some kind of help.

Best regards,

Gabriel
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#2 lore raw

HI Dmitry,

Thank you very much for your answer!

I have tried it, but I get the same:

CM-A510>> mmc init
CM-A510>> mmcinfo 0
Device: MV_SDHCI
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0
Bus Width: 0-bit

In reference to peripherals, only is available USB and Ethernet 0 by default. I am searching in the sources just in case there is something else... but I am afraid I will not find something.

Quoted 3 lines
Quoted 3 lines
#define CM_A510_MPP0_7                                 0x00000033
#define CM_A510_MPP8_15                                0x00445050
#define CM_A510_MPP16_23                               0x66664040

By the way, how do you get that resgisters? In my case, I tried to define them as per as Marvell 88AP510 Specification reference. Is it the right place?

Best regards,

Gabriel

Quoted 99 lines · Dmitry Lifshitz

Hi Gabriel,

Try fixing CM-A510 related code:

mvBoardEnvSpec.h

...
...

/* CM-A510 */

#define CM_A510_MPP0_7                                 0x00000033
#define CM_A510_MPP8_15                                0x00445050
#define CM_A510_MPP16_23                               0x66664040
#define CM_A510_MPP24_31                               0x11111111
#define CM_A510_MPP32_39                               0x11111111
#define CM_A510_MPP40_47                               0x11111111
#define CM_A510_MPP48_55                               0x11111111
#define CM_A510_MPP56_63                               0x00111111

...

board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c

...
...
MV_BOARD_MPP_INFO cm_a510InfoBoardMppConfigValue[]

...

Regards,

Dmitry

Quoted 60 lines · Gabriel Dobato

Hello,

I am trying to boot the kernel image from SD-CARD (mmc0) in the CM-510 SoM(provided by Compulab) using the u-boot image provided by Compulab:

http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres

By default, it seems SD-Card is not enabled, so I think I have to configure right the MPP option.

I have searched over and over in the code sources, I have change some arrays defined in some files that are related to the MPP (pinmux) but nothing happens:

./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.h:

* DB-88F6781-BP B0 */
#define DB_88AP510BP_B_MPP0_7 0x00000000
#define DB_88AP510BP_B_MPP8_15 0x00442000

#define DB_88AP510BP_B_MPP16_23            0x32334043   <---
#define DB_88AP510BP_B_MPP24_31            0x11111111
#define DB_88AP510BP_B_MPP32_39            0x11111111
#define DB_88AP510BP_B_MPP40_47            0x11111111   <---
#define DB_88AP510BP_B_MPP48_55            0x11111111
#define DB_88AP510BP_B_MPP56_63            0x00111111

#define DB_88AP510BP_B_OE_LOW (~((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT14)|(BIT15)|(BIT16)|(BIT18)|(BIT19)))

#define DB_88AP510BP_B_OE_HIGH 0x0FFFFFFF
#define DB_88AP510BP_B_OE_VAL_LOW ((BIT1)|(BIT2)|(BIT5)|(BIT7)|(BIT8)|(BIT10)|(BIT11)|(BIT16)|(BIT18)|(BIT19))

#define DB_88AP510BP_B_OE_VAL_HIGH 0x0

./board/marvell/mv_dove/dove_family/boardEnv/mvBoardEnvSpec.c:
MV_BOARD_MPP_INFO db88f6781bpbInfoBoardMppConfigValue[] =

     {{{{
     DB_88AP510BP_B_MPP0_7,
     DB_88AP510BP_B_MPP8_15,
     DB_88AP510BP_B_MPP16_23,
     DB_88AP510BP_B_MPP40_47        <-------
     }}}};

Anyone has faced this problem before? I really appreciate some kind of help.

Best regards,

Gabriel
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#3 lore raw

Hi Gabriel,

Quoted 18 lines · Gabriel Dobato

HI Dmitry,

Thank you very much for your answer!

I have tried it, but I get the same:

CM-A510>> mmc init
CM-A510>> mmcinfo 0
Device: MV_SDHCI
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0
Bus Width: 0-bit

Quoted 8 lines

In reference to peripherals, only is available USB and Ethernet 0 by default. I am searching in the sources just in case there is something else... but I am afraid I will not find something.

Quoted 3 lines
Quoted 3 lines
#define CM_A510_MPP0_7                                 0x00000033
#define CM_A510_MPP8_15                                0x00445050
#define CM_A510_MPP16_23                               0x66664040

We forked from DB88AP510-A-P dev board code. Apply the patches from the latest CM-A510 U-Boot package
(http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres)
to see the changes log and build instructions.

Quoted 7 lines

By the way, how do you get that resgisters? In my case, I tried to define them as per as Marvell 88AP510 Specification reference. Is it the right place?

Best regards,

Gabriel

Regards,

Dmitry

#4 lore raw

Hi Dmitry,

Finally, I got the SD Card as a bootable kernel space. However I had to set the registers as below:

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

#define CM_A510_MPP0_7 0x00000033 (does not

matter)

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

#define CM_A510_MPP8_15 0x00445050 (does not

matter)

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

#define CM_A510_MPP16_23 0x33333333 <----

(SDIO0 and SDIO1)

Regards,

Gabriel

Quoted 47 lines · Dmitry Lifshitz

Hi Gabriel,

Quoted 18 lines · Gabriel Dobato

HI Dmitry,

Thank you very much for your answer!

I have tried it, but I get the same:

CM-A510>> mmc init
CM-A510>> mmcinfo 0
Device: MV_SDHCI
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0
Bus Width: 0-bit

Quoted 8 lines

In reference to peripherals, only is available USB and Ethernet 0 by default. I am searching in the sources just in case there is something else... but I am afraid I will not find something.

Quoted 3 lines
Quoted 3 lines
#define CM_A510_MPP0_7                                 0x00000033
#define CM_A510_MPP8_15                                0x00445050
#define CM_A510_MPP16_23                               0x66664040

We forked from DB88AP510-A-P dev board code. Apply the patches from the latest CM-A510 U-Boot package
(http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres)
to see the changes log and build instructions.

Quoted 7 lines

By the way, how do you get that resgisters? In my case, I tried to define them as per as Marvell 88AP510 Specification reference. Is it the right place?

Best regards,

Gabriel

Regards,

Dmitry

#5 lore raw

Hi Gabriel,

Sorry for the late reply.
I see you made a progress with that issue.

Thank you for sharing the results.

Best regards,

Dmitry

Quoted 69 lines · Gabriel Dobato

Hi Dmitry,

Finally, I got the SD Card as a bootable kernel space. However I had to set the registers as below:

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

#define CM_A510_MPP0_7 0x00000033 (does not

matter)

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

#define CM_A510_MPP8_15 0x00445050 (does not

matter)

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

#define CM_A510_MPP16_23 0x33333333 <----

(SDIO0 and SDIO1)

Regards,

Gabriel

Quoted 47 lines · Dmitry Lifshitz

Hi Gabriel,

Quoted 18 lines · Gabriel Dobato

HI Dmitry,

Thank you very much for your answer!

I have tried it, but I get the same:

CM-A510>> mmc init
CM-A510>> mmcinfo 0
Device: MV_SDHCI
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0
Bus Width: 0-bit

Quoted 8 lines

In reference to peripherals, only is available USB and Ethernet 0 by default. I am searching in the sources just in case there is something else... but I am afraid I will not find something.

Quoted 3 lines
Quoted 3 lines
#define CM_A510_MPP0_7                                 0x00000033
#define CM_A510_MPP8_15                                0x00445050
#define CM_A510_MPP16_23                               0x66664040

We forked from DB88AP510-A-P dev board code. Apply the patches from the latest CM-A510 U-Boot package
(http://www.compulab.co.il/products/computer-on-modules/cm-a510/#devres)
to see the changes log and build instructions.

Quoted 7 lines

By the way, how do you get that resgisters? In my case, I tried to define them as per as Marvell 88AP510 Specification reference. Is it the right place?

Best regards,

Gabriel

Regards,

Dmitry