ANQP to second AP while associated to a first.
In our testing we are trying to do 802.11r roaming with ANQP.
After initial association, we do not see ANQP on the air when trying to roam to a new AP.
I think the problem might be that the firmware has issues sending packets to a second AP when we are already associated to a first.
I am curious if anyone has successfully tested any sort of .11r roaming with ath10k?
And, I am curious if anyone knows if or how ath10k can send
to a second AP while connected to a different AP (Like creating a peer for the new AP, perhaps???)
Thanks,
Ben
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 8 lines · Ben Greear
In our testing we are trying to do 802.11r roaming with ANQP.
After initial association, we do not see ANQP on the air when trying to roam to a new AP.
I think the problem might be that the firmware has issues sending packets to a second AP when we are already associated to a first.
Quoted 8 lines
I am curious if anyone has successfully tested any sort of .11r roaming with ath10k?
And, I am curious if anyone knows if or how ath10k can send
to a second AP while connected to a different AP (Like creating a peer for the new
AP, perhaps???)
offchannel code - send/receive frames on different channel. I think you should be able to receive all action frames.
BR
Janusz
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k