Skip to contentSkip to conversation

ANQP to second AP while associated to a first.

DISCUSSION Ben Greear 2 participants 2 messages Jun 30, 2015 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore

Ben Greear

author
#0 lore raw

In our testing we are trying to do 802.11r roaming with ANQP.

After initial association, we do not see ANQP on the air when trying to roam to a new AP.

I think the problem might be that the firmware has issues sending packets to a second AP when we are already associated to a first.

I am curious if anyone has successfully tested any sort of .11r roaming with ath10k?

And, I am curious if anyone knows if or how ath10k can send
to a second AP while connected to a different AP (Like creating a peer for the new AP, perhaps???)

Thanks,
Ben

Signature · 8 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#1 lore raw
Quoted 8 lines · Ben Greear

In our testing we are trying to do 802.11r roaming with ANQP.

After initial association, we do not see ANQP on the air when trying to roam to a new AP.

I think the problem might be that the firmware has issues sending packets to a second AP when we are already associated to a first.

Quoted 8 lines

I am curious if anyone has successfully tested any sort of .11r roaming with ath10k?

And, I am curious if anyone knows if or how ath10k can send
to a second AP while connected to a different AP (Like creating a peer for the new
AP, perhaps???)

offchannel code - send/receive frames on different channel. I think you should be able to receive all action frames.

BR
Janusz

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k