Skip to contentSkip to conversation

Updated CT firmware uploaded.

DISCUSSION Ben Greear 1 participant 1 message Jul 9, 2015 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore

Ben Greear

author
#0 lore raw

Changes since last email of this nature:

* Fix crash related to a race where packet was (re)sent to a peer that had been deleted. The crash was in the rate-ctrl logic, and was seen when an Apple MAC laptop with bcom AC NIC did a network discovery while connected to ath10k AP and while running iperf. The ath10k AP disconnects the MAC in this case, which can trigger the firmware bug. Possibly, a better solution is to force a flush of the peer's tx queue when deleting a peer. A note has been made to revisit this in the future.

* Allow over-riding thresh62_ext and some ack-timing registers. thresh62_ext has been tested, the others have not at this time. This may help with some regulatory testing issues.

* Fix beacon concurrency issues: The firmware did not properly go in an 'rx-all-beacons' mode when more than 2 station vdevs were created. This left the third receiving no beacons if connected to a different AP from the others.

And note: For anyone doing IBSS/ADHOC with my firmware, please use the beta builds until I can do an official version-14 release.

http://www.candelatech.com/ath10k.php

http://www.candelatech.com/downloads/ath10k-fw-beta/

Thanks,
Ben

Signature · 8 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k