Updated CT firmware uploaded.
Changes since last email of this nature:
* Fix crash related to a race where packet was (re)sent to a peer that had been deleted. The crash was in the rate-ctrl logic, and was seen when an Apple MAC laptop with bcom AC NIC did a network discovery while connected to ath10k AP and while running iperf. The ath10k AP disconnects the MAC in this case, which can trigger the firmware bug. Possibly, a better solution is to force a flush of the peer's tx queue when deleting a peer. A note has been made to revisit this in the future.
* Allow over-riding thresh62_ext and some ack-timing registers. thresh62_ext has been tested, the others have not at this time. This may help with some regulatory testing issues.
* Fix beacon concurrency issues: The firmware did not properly go in an 'rx-all-beacons' mode when more than 2 station vdevs were created. This left the third receiving no beacons if connected to a different AP from the others.
And note: For anyone doing IBSS/ADHOC with my firmware, please use the beta builds until I can do an official version-14 release.
http://www.candelatech.com/ath10k.php
http://www.candelatech.com/downloads/ath10k-fw-beta/
Thanks,
Ben
Signature · 8 lines
Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k