QCA6174 hw2.1 on Clevo P750ZM
Hi
I just received a Clevo P750ZM (eurocom P5 pro) with a QCA6174
06:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 20)
Hi have tested the dissect/assemble procedure described here :
https://www.mail-archive.com/[email protected]/msg02283.html
https://askubuntu.com/questions/546813/killer-n1525-with-ubuntu-14-10
Im on Arch and i have tested with the Eurocom Drivers
(http://downloads.eurocom.com/support/drivers/zip/260/260_KillerWLAN_W864.zip)
and the sumdog blobs (https://github.com/sumdog/ath10k-firmware.git)
directly on those 3 firmwares
Arch official : 4.1.2-2-ARCH
kvalo master : 4.2.0-rc3
kvalo qca branch : 4.1.0-rc6
I have a different issue for each kernel and i have tested with all board.bin available but none worked :
ARCH official issue :
[ 15.794214] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002) [ 15.794528] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 15.973369] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/cal-pci-0000:06:00.0.bin failed with error -2 [ 17.152098] ath10k_pci 0000:06:00.0: firmware crashed! (uuid 845cf3fa-05bd-4eed-873b-763f94de2e76) [ 17.152101] ath10k_pci 0000:06:00.0: qca6174 hw2.1 (0x05010000, 0x003405ff) fw killer-n1525-fw api 4 htt 0.0 wmi 4 cal otp max_sta 32 [ 17.152103] ath10k_pci 0000:06:00.0: debug 0 debugfs 1 tracing 0 dfs 0 testmode 0 [ 17.154123] ath10k_pci 0000:06:00.0: firmware register dump: [ 17.154124] ath10k_pci 0000:06:00.0: [00]: 0x05010000 0x000015B3 0x0095186B 0x00955B31 [ 17.154125] ath10k_pci 0000:06:00.0: [04]: 0x0095186B 0x00060130 0x00000010 0x0040AF04 [ 17.154126] ath10k_pci 0000:06:00.0: [08]: 0x00000018 0x00000001 0x00000001 0x00412250 [ 17.154127] ath10k_pci 0000:06:00.0: [12]: 0x00000009 0x00000000 0x0096C09C 0x0096C0A7 [ 17.154128] ath10k_pci 0000:06:00.0: [16]: 0x0096BDBC 0x0092C07A 0x00000000 0x00000000 [ 17.154128] ath10k_pci 0000:06:00.0: [20]: 0x4095186B 0x0040E160 0x0041F82C 0x00000001 [ 17.154129] ath10k_pci 0000:06:00.0: [24]: 0x80936238 0x0040E1C0 0x00000000 0xC095186B [ 17.154130] ath10k_pci 0000:06:00.0: [28]: 0x80936361 0x0040E1E0 0x00000000 0x0041C8DC [ 17.154131] ath10k_pci 0000:06:00.0: [32]: 0x80934A67 0x0040E200 0x00436DF0 0x0040E250 [ 17.154132] ath10k_pci 0000:06:00.0: [36]: 0x809A5DC2 0x0040E250 0x004275C0 0x00000001 [ 17.154133] ath10k_pci 0000:06:00.0: [40]: 0x809A5E1A 0x0040E290 0x00426F50 0x00000004 [ 17.154133] ath10k_pci 0000:06:00.0: [44]: 0x809A5EFA 0x0040E2B0 0x00426F50 0x0041C8DC [ 17.154134] ath10k_pci 0000:06:00.0: [48]: 0x800A0909 0x0040E2D0 0x00426F50 0x004275B0 [ 17.154135] ath10k_pci 0000:06:00.0: [52]: 0x800A024A 0x0040E2F0 0x0041ABB0 0x00420420 [ 17.154136] ath10k_pci 0000:06:00.0: [56]: 0x809287D9 0x0040E310 0x00000000 0x00400000 [ 18.144916] ath10k_pci 0000:06:00.0: failed to receive control response completion, polling.. [ 19.146522] ath10k_pci 0000:06:00.0: ctl_resp never came in (-110) [ 19.146525] ath10k_pci 0000:06:00.0: failed to connect to HTC: -110 [ 19.217113] ath10k_pci 0000:06:00.0: could not init core (-110) [ 19.217137] ath10k_pci 0000:06:00.0: could not probe fw (-110) [ 19.227008] ath10k_pci 0000:06:00.0: cannot restart a device that
hasn't been started
kvalo master :
[ 0.000000] Linux version 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+ (root@z1kadev) (gcc version 5.1.0 (GCC) ) #2 SMP PREEMPT Tue Jul 21 15:07:02 WAT 2015 [ 12.381604] systemd[1]: cups.path: Cannot add dependency job, ignoring: Unit cups.path failed to load: No such file or directory. [ 12.595610] ath3k: probe of 3-7:1.0 failed with error -22 [ 12.595637] usbcore: registered new interface driver ath3k [ 12.627163] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002) [ 12.627915] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 12.822155] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/cal-pci-0000:06:00.0.bin failed with error -2 [ 12.822158] ath10k_pci 0000:06:00.0: Falling back to user helper [ 72.915990] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2 [ 72.915993] ath10k_pci 0000:06:00.0: Falling back to user helper [ 133.010331] ath10k_pci 0000:06:00.0: failed to load spec board file, falling back to generic: -11 [ 133.010647] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2 [ 133.010649] ath10k_pci 0000:06:00.0: Falling back to user helper [ 193.105501] ath10k_pci 0000:06:00.0: could not fetch firmware file 'ath10k/QCA6174/hw2.1/firmware-5.bin': -11 [ 194.276201] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 194.276209] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 195.275581] ath10k_pci 0000:06:00.0: failed to receive control response completion, polling.. [ 195.275699] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 196.277176] ath10k_pci 0000:06:00.0: Service connect timeout [ 196.277179] ath10k_pci 0000:06:00.0: failed to connect htt (-110) [ 196.347791] ath10k_pci 0000:06:00.0: could not init core (-110) [ 196.347819] ath10k_pci 0000:06:00.0: could not probe fw (-110)
kvalo qca branch :
[ 386.639108] ath10k_pci 0000:06:00.0: failed to receive initialized event from target: b8600448 [ 386.639110] ath10k_pci 0000:06:00.0: failed to wait for target after cold reset: -110 [ 386.639110] ath10k_pci 0000:06:00.0: failed to reset chip: -110 [ 386.639203] ath10k_pci: probe of 0000:06:00.0 failed with error -110 [ 419.547152] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 422.565998] ath10k_pci 0000:06:00.0: failed to receive initialized event from target: b8600448 [ 422.566000] ath10k_pci 0000:06:00.0: failed to wait for target after cold reset: -110 [ 422.566001] ath10k_pci 0000:06:00.0: failed to reset chip: -110 [ 422.566096] ath10k_pci: probe of 0000:06:00.0 failed with error -110
im getting only the cal issue on the kvalo master if i copy firmware-4.bin to firmware-5.bin. If i copy fw-1.bin from dissect.py to cal-pci-0000:06:00.0.bin . I m getting the issue with the official arch...
Hope somebody can help
Best Regards
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 11 lines · Alexandre Maloteaux
Hi
I just received a Clevo P750ZM (eurocom P5 pro) with a QCA6174
06:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 20)
Hi have tested the dissect/assemble procedure described here :
https://www.mail-archive.com/[email protected]/msg02283.html
https://askubuntu.com/questions/546813/killer-n1525-with-ubuntu-14-10
There's an unofficial image that's lying in a pull request on github[1] you could use. It probably needs skip_otp parameter to be used.
Quoted 9 lines
Im on Arch and i have tested with the Eurocom Drivers
(http://downloads.eurocom.com/support/drivers/zip/260/260_KillerWLAN_W864.zip)
and the sumdog blobs (https://github.com/sumdog/ath10k-firmware.git)
directly on those 3 firmwares
Arch official : 4.1.2-2-ARCH
kvalo master : 4.2.0-rc3
kvalo qca branch : 4.1.0-rc6
Quoted 4 lines
I have a different issue for each kernel and i have tested with all board.bin available but none worked :
ARCH official issue :
[snip]
This won't work. 4.1 doesn't contain the necessary patch[2].
Quoted 32 lines
kvalo master :
[ 0.000000] Linux version 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+ (root@z1kadev) (gcc version 5.1.0 (GCC) ) #2 SMP PREEMPT Tue Jul 21 15:07:02 WAT 2015 [ 12.381604] systemd[1]: cups.path: Cannot add dependency job, ignoring: Unit cups.path failed to load: No such file or directory. [ 12.595610] ath3k: probe of 3-7:1.0 failed with error -22 [ 12.595637] usbcore: registered new interface driver ath3k [ 12.627163] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002) [ 12.627915] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 12.822155] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/cal-pci-0000:06:00.0.bin failed with error -2 [ 12.822158] ath10k_pci 0000:06:00.0: Falling back to user helper [ 72.915990] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2 [ 72.915993] ath10k_pci 0000:06:00.0: Falling back to user helper [ 133.010331] ath10k_pci 0000:06:00.0: failed to load spec board file, falling back to generic: -11 [ 133.010647] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2 [ 133.010649] ath10k_pci 0000:06:00.0: Falling back to user helper [ 193.105501] ath10k_pci 0000:06:00.0: could not fetch firmware file 'ath10k/QCA6174/hw2.1/firmware-5.bin': -11 [ 194.276201] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 194.276209] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 195.275581] ath10k_pci 0000:06:00.0: failed to receive control response completion, polling.. [ 195.275699] ath10k_pci 0000:06:00.0: received unsolicited fw crash
Quoted 1 line
interrupt
This looks interesting. Can you please:
rmmod ath10k_pci
modprobe ath10k_pci irq_mode=1
Msi range handling could be broken on this hw. If so we'll need to blacklist it.
Quoted 22 lines
[ 196.277176] ath10k_pci 0000:06:00.0: Service connect timeout [ 196.277179] ath10k_pci 0000:06:00.0: failed to connect htt (-110) [ 196.347791] ath10k_pci 0000:06:00.0: could not init core (-110) [ 196.347819] ath10k_pci 0000:06:00.0: could not probe fw (-110)kvalo qca branch :
[ 386.639108] ath10k_pci 0000:06:00.0: failed to receive initialized event from target: b8600448 [ 386.639110] ath10k_pci 0000:06:00.0: failed to wait for target after cold reset: -110 [ 386.639110] ath10k_pci 0000:06:00.0: failed to reset chip: -110 [ 386.639203] ath10k_pci: probe of 0000:06:00.0 failed with error -110 [ 419.547152] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 422.565998] ath10k_pci 0000:06:00.0: failed to receive initialized event from target: b8600448 [ 422.566000] ath10k_pci 0000:06:00.0: failed to wait for target after cold reset: -110 [ 422.566001] ath10k_pci 0000:06:00.0: failed to reset chip: -110 [ 422.566096] ath10k_pci: probe of 0000:06:00.0 failed with error -110
Quoted 2 lines
im getting only the cal issue on the kvalo master if i copy firmware-4.bin to firmware-5.bin.
Don't just go about renaming firmware filenames like that, please. It's used to prevent older ath10k using newer firmware images which it wouldn't handle anyway.
Quoted 2 lines
If i copy fw-1.bin from
dissect.pyto
cal-pci-0000:06:00.0.bin . I m getting the issue with the official arch...
Uhm, that's wrong. Don't use cal-pci-xxx unless you know what you're doing.
fw-1 and fw-2 from dissect are otp and main program binaries. cal-pci-xxx is just calibration data blob. This is something entirely else.
If you see OTP failure you need to either set up adequate fw_feature flag in the firmware-X.bin or pass skip_otp=y parameter while probing ath10k_core module.
[1]: https://github.com/kvalo/ath10k-firmware/pull/2
[2]: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/net/wireless/ath/ath10k/pci.c?id=11a002efbaa7fbd9f6e616695ab42aa9f1caf060
Michał
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Hi Michal
Quoted 3 lines
There's an unofficial image that's lying in a pull request on github[1] you could use. It probably needs
skip_otpparameter to be used.
I think this is the sumdog firmwares; i tested them and i made all the test with the skip_otp parameter
Quoted 6 lines
This looks interesting. Can you please:
rmmod
ath10k_pci
modprobeath10k_pciirq_mode=1Msi range handling could be broken on this hw. If so we'll need to blacklist it.
Still the same issue :
[ 213.889825] ath10k_pci 0000:06:00.0: limiting irq mode to: 1 [ 213.889833] ath10k_pci 0000:06:00.0: pci irq legacy interrupts 0 irq_mode 1 reset_mode 0 [ 216.907165] ath10k_pci 0000:06:00.0: failed to receive initialized event from target: b8600448 [ 216.907166] ath10k_pci 0000:06:00.0: failed to wait for target after cold reset: -110 [ 216.907167] ath10k_pci 0000:06:00.0: failed to reset chip: -110 [ 216.907220] ath10k_pci: probe of 0000:06:00.0 failed with error -110
Quoted 3 lines
Don't just go about renaming firmware filenames like that, please. It's used to prevent older ath10k using newer firmware images which it wouldn't handle anyway.
upon those instructions :
https://github.com/kvalo/ath10k-firmware/pull/2
copying firmware-4.bin to firmware-5.bin seems to help for some users
Best Regards
Quoted 117 lines · Michal Kazior
Quoted 11 lines · Alexandre Maloteaux
Hi
I just received a Clevo P750ZM (eurocom P5 pro) with a QCA6174
06:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 20)
Hi have tested the dissect/assemble procedure described here :
https://www.mail-archive.com/[email protected]/msg02283.html
https://askubuntu.com/questions/546813/killer-n1525-with-ubuntu-14-10There's an unofficial image that's lying in a pull request on github[1] you could use. It probably needs
skip_otpparameter to be used.Quoted 8 lines
Im on Arch and i have tested with the Eurocom Drivers
(http://downloads.eurocom.com/support/drivers/zip/260/260_KillerWLAN_W864.zip)
and the sumdog blobs (https://github.com/sumdog/ath10k-firmware.git)
directly on those 3 firmwares
Arch official : 4.1.2-2-ARCH
kvalo master : 4.2.0-rc3
kvalo qca branch : 4.1.0-rc6Quoted 4 lines
I have a different issue for each kernel and i have tested with all board.bin available but none worked :
ARCH official issue :
[snip]
This won't work. 4.1 doesn't contain the necessary patch[2].
Quoted 32 lines
kvalo master :
[ 0.000000] Linux version 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+ (root@z1kadev) (gcc version 5.1.0 (GCC) ) #2 SMP PREEMPT Tue Jul 21 15:07:02 WAT 2015 [ 12.381604] systemd[1]: cups.path: Cannot add dependency job, ignoring: Unit cups.path failed to load: No such file or directory. [ 12.595610] ath3k: probe of 3-7:1.0 failed with error -22 [ 12.595637] usbcore: registered new interface driver ath3k [ 12.627163] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002) [ 12.627915] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 12.822155] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/cal-pci-0000:06:00.0.bin failed with error -2 [ 12.822158] ath10k_pci 0000:06:00.0: Falling back to user helper [ 72.915990] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2 [ 72.915993] ath10k_pci 0000:06:00.0: Falling back to user helper [ 133.010331] ath10k_pci 0000:06:00.0: failed to load spec board file, falling back to generic: -11 [ 133.010647] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2 [ 133.010649] ath10k_pci 0000:06:00.0: Falling back to user helper [ 193.105501] ath10k_pci 0000:06:00.0: could not fetch firmware file 'ath10k/QCA6174/hw2.1/firmware-5.bin': -11 [ 194.276201] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 194.276209] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 195.275581] ath10k_pci 0000:06:00.0: failed to receive control response completion, polling.. [ 195.275699] ath10k_pci 0000:06:00.0: received unsolicited fw crashQuoted 1 line
interrupt
This looks interesting. Can you please:
rmmod
ath10k_pci
modprobeath10k_pciirq_mode=1Msi range handling could be broken on this hw. If so we'll need to blacklist it.
Quoted 22 lines
[ 196.277176] ath10k_pci 0000:06:00.0: Service connect timeout [ 196.277179] ath10k_pci 0000:06:00.0: failed to connect htt (-110) [ 196.347791] ath10k_pci 0000:06:00.0: could not init core (-110) [ 196.347819] ath10k_pci 0000:06:00.0: could not probe fw (-110)kvalo qca branch :
[ 386.639108] ath10k_pci 0000:06:00.0: failed to receive initialized event from target: b8600448 [ 386.639110] ath10k_pci 0000:06:00.0: failed to wait for target after cold reset: -110 [ 386.639110] ath10k_pci 0000:06:00.0: failed to reset chip: -110 [ 386.639203] ath10k_pci: probe of 0000:06:00.0 failed with error -110 [ 419.547152] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 422.565998] ath10k_pci 0000:06:00.0: failed to receive initialized event from target: b8600448 [ 422.566000] ath10k_pci 0000:06:00.0: failed to wait for target after cold reset: -110 [ 422.566001] ath10k_pci 0000:06:00.0: failed to reset chip: -110 [ 422.566096] ath10k_pci: probe of 0000:06:00.0 failed with error -110Quoted 2 lines
im getting only the cal issue on the kvalo master if i copy firmware-4.bin to firmware-5.bin.
Don't just go about renaming firmware filenames like that, please. It's used to prevent older ath10k using newer firmware images which it wouldn't handle anyway.
Quoted 2 lines
If i copy fw-1.bin from
dissect.pyto
cal-pci-0000:06:00.0.bin . I m getting the issue with the official arch...Uhm, that's wrong. Don't use cal-pci-xxx unless you know what you're doing.
fw-1 and fw-2 from dissect are otp and main program binaries. cal-pci-xxx is just calibration data blob. This is something entirely else.
If you see OTP failure you need to either set up adequate
fw_featureflag in the firmware-X.bin or pass skip_otp=y parameter while probingath10k_coremodule.
Quoted 6 lines
[1]: https://github.com/kvalo/ath10k-firmware/pull/2
[2]: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/net/wireless/ath/ath10k/pci.c?id=11a002efbaa7fbd9f6e616695ab42aa9f1caf060Michał
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 16 lines · Alexandre Maloteaux
Hi Michal
Quoted 3 lines
There's an unofficial image that's lying in a pull request on github[1] you could use. It probably needs
skip_otpparameter to be used.I think this is the sumdog firmwares; i tested them and i made all the test with the
skip_otpparameterQuoted 6 lines
This looks interesting. Can you please:
rmmod
ath10k_pci
modprobeath10k_pciirq_mode=1Msi range handling could be broken on this hw. If so we'll need to blacklist it.
Quoted 7 lines
Still the same issue :
[ 213.889825] ath10k_pci 0000:06:00.0: limiting irq mode to: 1 [ 213.889833] ath10k_pci 0000:06:00.0: pci irq legacy interrupts 0 irq_mode 1 reset_mode 0 [ 216.907165] ath10k_pci 0000:06:00.0: failed to receive initializedevent from target:
b8600448
Whoa. This value cannot be possibly correct. The register shouldn't ever take such values.
What is the head commit id (kvalo/master) that you've used? You might be missing a patches[1][2] that fixed a recent breakage in the dev tree.
Can you make sure you test df0cf3c1249bc0c3a5a2077d6901eb90c19b7fda, please?
When you do, and it still crashes, can you get traces[3], please?
Quoted 6 lines
[ 216.907166] ath10k_pci 0000:06:00.0: failed to wait for target after cold reset: -110 [ 216.907167] ath10k_pci 0000:06:00.0: failed to reset chip: -110 [ 216.907220] ath10k_pci: probe of 0000:06:00.0 failed with error -110
Quoted 6 lines
Quoted 3 lines
Don't just go about renaming firmware filenames like that, please. It's used to prevent older ath10k using newer firmware images which it wouldn't handle anyway.
upon those instructions :
https://github.com/kvalo/ath10k-firmware/pull/2
copying firmware-4.bin to firmware-5.bin seems to help for some users
It matters not. Driver tries to fallback until it finds any firmware-X. If it doesn't find firmware-5.bin it'll try to load firmware-4.bin, etc. This will be accompanied by a warning in kernel log for each fallback attempt but it's harmless. Driver doesn't distinguish firmware functionality by filename numbering.
[1]: https://github.com/kvalo/ath/commit/a052158aa981ca470673f49c636b289ee16894ea
[2]: https://github.com/kvalo/ath/commit/3c7e256a6de378e01098147527082abae05b146e
[3]: https://wireless.wiki.kernel.org/en/users/drivers/ath10k/debug#tracing
Michał
Quoted 129 lines
Best Regards
Quoted 123 lines · Michal Kazior
Quoted 11 lines · Alexandre Maloteaux
Hi
I just received a Clevo P750ZM (eurocom P5 pro) with a QCA6174
06:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 20)
Hi have tested the dissect/assemble procedure described here :
https://www.mail-archive.com/[email protected]/msg02283.html
https://askubuntu.com/questions/546813/killer-n1525-with-ubuntu-14-10There's an unofficial image that's lying in a pull request on github[1] you could use. It probably needs
skip_otpparameter to be used.Quoted 8 lines
Im on Arch and i have tested with the Eurocom Drivers
(http://downloads.eurocom.com/support/drivers/zip/260/260_KillerWLAN_W864.zip)
and the sumdog blobs (https://github.com/sumdog/ath10k-firmware.git)
directly on those 3 firmwares
Arch official : 4.1.2-2-ARCH
kvalo master : 4.2.0-rc3
kvalo qca branch : 4.1.0-rc6Quoted 4 lines
I have a different issue for each kernel and i have tested with all board.bin available but none worked :
ARCH official issue :
[snip]
This won't work. 4.1 doesn't contain the necessary patch[2].
Quoted 32 lines
kvalo master :
[ 0.000000] Linux version 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+ (root@z1kadev) (gcc version 5.1.0 (GCC) ) #2 SMP PREEMPT Tue Jul 21 15:07:02 WAT 2015 [ 12.381604] systemd[1]: cups.path: Cannot add dependency job, ignoring: Unit cups.path failed to load: No such file or directory. [ 12.595610] ath3k: probe of 3-7:1.0 failed with error -22 [ 12.595637] usbcore: registered new interface driver ath3k [ 12.627163] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002) [ 12.627915] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 12.822155] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/cal-pci-0000:06:00.0.bin failed with error -2 [ 12.822158] ath10k_pci 0000:06:00.0: Falling back to user helper [ 72.915990] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2 [ 72.915993] ath10k_pci 0000:06:00.0: Falling back to user helper [ 133.010331] ath10k_pci 0000:06:00.0: failed to load spec board file, falling back to generic: -11 [ 133.010647] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2 [ 133.010649] ath10k_pci 0000:06:00.0: Falling back to user helper [ 193.105501] ath10k_pci 0000:06:00.0: could not fetch firmware file 'ath10k/QCA6174/hw2.1/firmware-5.bin': -11 [ 194.276201] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 194.276209] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 195.275581] ath10k_pci 0000:06:00.0: failed to receive control response completion, polling.. [ 195.275699] ath10k_pci 0000:06:00.0: received unsolicited fw crashQuoted 1 line
interrupt
This looks interesting. Can you please:
rmmod
ath10k_pci
modprobeath10k_pciirq_mode=1Msi range handling could be broken on this hw. If so we'll need to blacklist it.
Quoted 22 lines
[ 196.277176] ath10k_pci 0000:06:00.0: Service connect timeout [ 196.277179] ath10k_pci 0000:06:00.0: failed to connect htt (-110) [ 196.347791] ath10k_pci 0000:06:00.0: could not init core (-110) [ 196.347819] ath10k_pci 0000:06:00.0: could not probe fw (-110)kvalo qca branch :
[ 386.639108] ath10k_pci 0000:06:00.0: failed to receive initialized event from target: b8600448 [ 386.639110] ath10k_pci 0000:06:00.0: failed to wait for target after cold reset: -110 [ 386.639110] ath10k_pci 0000:06:00.0: failed to reset chip: -110 [ 386.639203] ath10k_pci: probe of 0000:06:00.0 failed with error -110 [ 419.547152] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 422.565998] ath10k_pci 0000:06:00.0: failed to receive initialized event from target: b8600448 [ 422.566000] ath10k_pci 0000:06:00.0: failed to wait for target after cold reset: -110 [ 422.566001] ath10k_pci 0000:06:00.0: failed to reset chip: -110 [ 422.566096] ath10k_pci: probe of 0000:06:00.0 failed with error -110Quoted 2 lines
im getting only the cal issue on the kvalo master if i copy firmware-4.bin to firmware-5.bin.
Don't just go about renaming firmware filenames like that, please. It's used to prevent older ath10k using newer firmware images which it wouldn't handle anyway.
Quoted 2 lines
If i copy fw-1.bin from
dissect.pyto
cal-pci-0000:06:00.0.bin . I m getting the issue with the official arch...Uhm, that's wrong. Don't use cal-pci-xxx unless you know what you're doing.
fw-1 and fw-2 from dissect are otp and main program binaries. cal-pci-xxx is just calibration data blob. This is something entirely else.
If you see OTP failure you need to either set up adequate
fw_featureflag in the firmware-X.bin or pass skip_otp=y parameter while probingath10k_coremodule.[1]: https://github.com/kvalo/ath10k-firmware/pull/2
[2]: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/net/wireless/ath/ath10k/pci.c?id=11a002efbaa7fbd9f6e616695ab42aa9f1caf060Michał
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Hi
Quoted 3 lines
What is the head commit id (kvalo/master) that you've used? You might be missing a patches[1][2] that fixed a recent breakage in the dev tree.
I m getting this issue only with kvalo-qca branch.
With kvalo master i m getting this issue below
Do you still want me to do the tracing part on kvalo-qca branch ?
kvalo-master :
0.000000] Linux version 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+
(root@z1kadev) (gcc version 5.1.0 (GCC) ) #2 SMP PREEMPT Tue Jul 21 15:07:02 WAT 2015
[ 12.381604] systemd[1]: cups.path: Cannot add dependency job, ignoring: Unit cups.path failed to load: No such file or directory. [ 12.595610] ath3k: probe of 3-7:1.0 failed with error -22 [ 12.595637] usbcore: registered new interface driver ath3k [ 12.627163] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002) [ 12.627915] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 12.822155] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/cal-pci-0000:06:00.0.bin failed with error -2 [ 12.822158] ath10k_pci 0000:06:00.0: Falling back to user helper [ 72.915990] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2 [ 72.915993] ath10k_pci 0000:06:00.0: Falling back to user helper [ 133.010331] ath10k_pci 0000:06:00.0: failed to load spec board file, falling back to generic: -11 [ 133.010647] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2 [ 133.010649] ath10k_pci 0000:06:00.0: Falling back to user helper [ 193.105501] ath10k_pci 0000:06:00.0: could not fetch firmware file 'ath10k/QCA6174/hw2.1/firmware-5.bin': -11 [ 194.276201] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 194.276209] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 195.275581] ath10k_pci 0000:06:00.0: failed to receive control response completion, polling.. [ 195.275699] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 196.277176] ath10k_pci 0000:06:00.0: Service connect timeout [ 196.277179] ath10k_pci 0000:06:00.0: failed to connect htt (-110) [ 196.347791] ath10k_pci 0000:06:00.0: could not init core (-110) [ 196.347819] ath10k_pci 0000:06:00.0: could not probe fw (-110)
Quoted 53 lines · Michal Kazior
Quoted 13 lines · Alexandre Maloteaux
Hi Michal
Quoted 3 lines
There's an unofficial image that's lying in a pull request on github[1] you could use. It probably needs
skip_otpparameter to be used.I think this is the sumdog firmwares; i tested them and i made all the test with the
skip_otpparameterQuoted 5 lines
This looks interesting. Can you please:
rmmod
ath10k_pci
modprobeath10k_pciirq_mode=1Quoted 8 lines
Quoted 1 line
Msi range handling could be broken on this hw. If so we'll need to blacklist it.
Still the same issue :
[ 213.889825] ath10k_pci 0000:06:00.0: limiting irq mode to: 1 [ 213.889833] ath10k_pci 0000:06:00.0: pci irq legacy interrupts 0 irq_mode 1 reset_mode 0 [ 216.907165] ath10k_pci 0000:06:00.0: failed to receive initializedevent from target:
b8600448Whoa. This value cannot be possibly correct. The register shouldn't ever take such values.
What is the head commit id (kvalo/master) that you've used? You might be missing a patches[1][2] that fixed a recent breakage in the dev tree.
Can you make sure you test
df0cf3c1249bc0c3a5a2077d6901eb90c19b7fda, please?When you do, and it still crashes, can you get traces[3], please?
Quoted 6 lines
[ 216.907166] ath10k_pci 0000:06:00.0: failed to wait for target after cold reset: -110 [ 216.907167] ath10k_pci 0000:06:00.0: failed to reset chip: -110 [ 216.907220] ath10k_pci: probe of 0000:06:00.0 failed with error -110Quoted 6 lines
Quoted 3 lines
Don't just go about renaming firmware filenames like that, please. It's used to prevent older ath10k using newer firmware images which it wouldn't handle anyway.
upon those instructions :
https://github.com/kvalo/ath10k-firmware/pull/2
copying firmware-4.bin to firmware-5.bin seems to help for some usersIt matters not. Driver tries to fallback until it finds any firmware-X. If it doesn't find firmware-5.bin it'll try to load firmware-4.bin, etc. This will be accompanied by a warning in kernel log for each fallback attempt but it's harmless. Driver doesn't distinguish firmware functionality by filename numbering.
Quoted 134 lines
[1]: https://github.com/kvalo/ath/commit/a052158aa981ca470673f49c636b289ee16894ea
[2]: https://github.com/kvalo/ath/commit/3c7e256a6de378e01098147527082abae05b146e
[3]: https://wireless.wiki.kernel.org/en/users/drivers/ath10k/debug#tracingMichał
Quoted 127 lines
Best Regards
Quoted 123 lines · Michal Kazior
Quoted 11 lines · Alexandre Maloteaux
Hi
I just received a Clevo P750ZM (eurocom P5 pro) with a QCA6174
06:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 20)
Hi have tested the dissect/assemble procedure described here :
https://www.mail-archive.com/[email protected]/msg02283.html
https://askubuntu.com/questions/546813/killer-n1525-with-ubuntu-14-10There's an unofficial image that's lying in a pull request on github[1] you could use. It probably needs
skip_otpparameter to be used.Quoted 8 lines
Im on Arch and i have tested with the Eurocom Drivers
(http://downloads.eurocom.com/support/drivers/zip/260/260_KillerWLAN_W864.zip)
and the sumdog blobs (https://github.com/sumdog/ath10k-firmware.git)
directly on those 3 firmwares
Arch official : 4.1.2-2-ARCH
kvalo master : 4.2.0-rc3
kvalo qca branch : 4.1.0-rc6Quoted 4 lines
I have a different issue for each kernel and i have tested with all board.bin available but none worked :
ARCH official issue :
[snip]
This won't work. 4.1 doesn't contain the necessary patch[2].
Quoted 32 lines
kvalo master :
[ 0.000000] Linux version 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+ (root@z1kadev) (gcc version 5.1.0 (GCC) ) #2 SMP PREEMPT Tue Jul 21 15:07:02 WAT 2015 [ 12.381604] systemd[1]: cups.path: Cannot add dependency job, ignoring: Unit cups.path failed to load: No such file or directory. [ 12.595610] ath3k: probe of 3-7:1.0 failed with error -22 [ 12.595637] usbcore: registered new interface driver ath3k [ 12.627163] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002) [ 12.627915] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 12.822155] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/cal-pci-0000:06:00.0.bin failed with error -2 [ 12.822158] ath10k_pci 0000:06:00.0: Falling back to user helper [ 72.915990] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2 [ 72.915993] ath10k_pci 0000:06:00.0: Falling back to user helper [ 133.010331] ath10k_pci 0000:06:00.0: failed to load spec board file, falling back to generic: -11 [ 133.010647] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2 [ 133.010649] ath10k_pci 0000:06:00.0: Falling back to user helper [ 193.105501] ath10k_pci 0000:06:00.0: could not fetch firmware file 'ath10k/QCA6174/hw2.1/firmware-5.bin': -11 [ 194.276201] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 194.276209] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 195.275581] ath10k_pci 0000:06:00.0: failed to receive control response completion, polling.. [ 195.275699] ath10k_pci 0000:06:00.0: received unsolicited fw crashQuoted 1 line
interrupt
This looks interesting. Can you please:
rmmod
ath10k_pci
modprobeath10k_pciirq_mode=1Msi range handling could be broken on this hw. If so we'll need to blacklist it.
Quoted 22 lines
[ 196.277176] ath10k_pci 0000:06:00.0: Service connect timeout [ 196.277179] ath10k_pci 0000:06:00.0: failed to connect htt (-110) [ 196.347791] ath10k_pci 0000:06:00.0: could not init core (-110) [ 196.347819] ath10k_pci 0000:06:00.0: could not probe fw (-110)kvalo qca branch :
[ 386.639108] ath10k_pci 0000:06:00.0: failed to receive initialized event from target: b8600448 [ 386.639110] ath10k_pci 0000:06:00.0: failed to wait for target after cold reset: -110 [ 386.639110] ath10k_pci 0000:06:00.0: failed to reset chip: -110 [ 386.639203] ath10k_pci: probe of 0000:06:00.0 failed with error -110 [ 419.547152] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 422.565998] ath10k_pci 0000:06:00.0: failed to receive initialized event from target: b8600448 [ 422.566000] ath10k_pci 0000:06:00.0: failed to wait for target after cold reset: -110 [ 422.566001] ath10k_pci 0000:06:00.0: failed to reset chip: -110 [ 422.566096] ath10k_pci: probe of 0000:06:00.0 failed with error -110Quoted 2 lines
im getting only the cal issue on the kvalo master if i copy firmware-4.bin to firmware-5.bin.
Don't just go about renaming firmware filenames like that, please. It's used to prevent older ath10k using newer firmware images which it wouldn't handle anyway.
Quoted 2 lines
If i copy fw-1.bin from
dissect.pyto
cal-pci-0000:06:00.0.bin . I m getting the issue with the official arch...Uhm, that's wrong. Don't use cal-pci-xxx unless you know what you're doing.
fw-1 and fw-2 from dissect are otp and main program binaries. cal-pci-xxx is just calibration data blob. This is something entirely else.
If you see OTP failure you need to either set up adequate
fw_featureflag in the firmware-X.bin or pass skip_otp=y parameter while probingath10k_coremodule.[1]: https://github.com/kvalo/ath10k-firmware/pull/2
[2]: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/net/wireless/ath/ath10k/pci.c?id=11a002efbaa7fbd9f6e616695ab42aa9f1caf060Michał
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 11 lines · Alexandre Maloteaux
Hi
Quoted 3 lines
What is the head commit id (kvalo/master) that you've used? You might be missing a patches[1][2] that fixed a recent breakage in the dev tree.
I m getting this issue only with kvalo-qca branch.
With kvalo master i m getting this issue below
Do you still want me to do the tracing part on kvalo-qca branch ?
No need to test kvalo-qca. Just stick with kvalo-master, please.
Quoted 5 lines
kvalo-master :
0.000000] Linux version 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+
(root@z1kadev) (gcc version 5.1.0 (GCC) ) #2 SMP PREEMPT Tue Jul 21 15:07:02 WAT 2015
Quoted 7 lines
[ 12.381604] systemd[1]: cups.path: Cannot add dependency job, ignoring: Unit cups.path failed to load: No such file or directory. [ 12.595610] ath3k: probe of 3-7:1.0 failed with error -22 [ 12.595637] usbcore: registered new interface driver ath3k [ 12.627163] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002) [ 12.627915] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8
irq_mode0reset_mode0
You didn't use the irq_mode=1 parameter. Can you re-test, please?
Michał
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Michal
With latest kvalo-master. I m getting this error on boot and after irq_mode=1
I used sumdog firmwares from github :
[ 255.996373] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002) [ 255.997129] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 256.174560] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/cal-pci-0000:06:00.0.bin failed with error -2 [ 256.174562] ath10k_pci 0000:06:00.0: Falling back to user helper [ 316.269053] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2 [ 316.269061] ath10k_pci 0000:06:00.0: Falling back to user helper [ 376.362848] ath10k_pci 0000:06:00.0: failed to load spec board file, falling back to generic: -11 [ 376.363326] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2 [ 376.363333] ath10k_pci 0000:06:00.0: Falling back to user helper [ 436.458041] ath10k_pci 0000:06:00.0: could not fetch firmware file 'ath10k/QCA6174/hw2.1/firmware-5.bin': -11 [ 437.634407] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 437.634415] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 438.634688] ath10k_pci 0000:06:00.0: failed to receive control response completion, polling.. [ 438.634767] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 438.634790] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 439.636320] ath10k_pci 0000:06:00.0: Service connect timeout [ 439.636325] ath10k_pci 0000:06:00.0: failed to connect htt (-110) [ 439.706905] ath10k_pci 0000:06:00.0: could not init core (-110) [ 439.706929] ath10k_pci 0000:06:00.0: could not probe fw (-110) [ 515.965549] ath10k_pci 0000:06:00.0: limiting irq mode to: 1
[ 515.965557] ath10k_pci 0000:06:00.0: pci irq legacy interrupts 0 irq_mode 1 reset_mode 0 [ 516.202334] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/cal-pci-0000:06:00.0.bin failed with error -2 [ 516.202335] ath10k_pci 0000:06:00.0: Falling back to user helper [ 576.296201] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2 [ 576.296210] ath10k_pci 0000:06:00.0: Falling back to user helper [ 636.391328] ath10k_pci 0000:06:00.0: failed to load spec board file, falling back to generic: -11 [ 636.391402] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2 [ 636.391405] ath10k_pci 0000:06:00.0: Falling back to user helper
Best Regards
Quoted 26 lines · Michal Kazior
Quoted 10 lines · Alexandre Maloteaux
Hi
Quoted 3 lines
What is the head commit id (kvalo/master) that you've used? You might be missing a patches[1][2] that fixed a recent breakage in the dev tree.
I m getting this issue only with kvalo-qca branch.
With kvalo master i m getting this issue below
Do you still want me to do the tracing part on kvalo-qca branch ?
No need to test kvalo-qca. Just stick with kvalo-master, please.
Quoted 5 lines
kvalo-master :
0.000000] Linux version 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+
(root@z1kadev) (gcc version 5.1.0 (GCC) ) #2 SMP PREEMPT Tue Jul 21 15:07:02 WAT 2015Quoted 7 lines
[ 12.381604] systemd[1]: cups.path: Cannot add dependency job, ignoring: Unit cups.path failed to load: No such file or directory. [ 12.595610] ath3k: probe of 3-7:1.0 failed with error -22 [ 12.595637] usbcore: registered new interface driver ath3k [ 12.627163] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002) [ 12.627915] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8
irq_mode0reset_mode0
Quoted 5 lines
You didn't use the irq_mode=1 parameter. Can you re-test, please?
Michał
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
A message that is not in the archive (sent off-list or not yet received): CA+BoTQmceF3xitMz1p6WFp3FVnOme4kpQaK=9ouAjyK4zwbvnQ@mail.gmail.com
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi Michal
It is finally working with irq_mode=1 and kvalo-master . The output is below; However it takes a lot of time to load/unload the device with successive firmwares. I ll try to find a solution for this on my own. Is it better to blacklist some module as you said earlier or create a modprobe.d rule with irq_mode=1 ?
Thanks a lot for knowledge and time shared !!!!!!
output :
[ 315.417575] ath10k_pci 0000:06:00.0: pci irq legacy interrupts 0 irq_mode 1 reset_mode 0 [ 315.661404] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/cal-pci-0000:06:00.0.bin failed with error -2 [ 315.661406] ath10k_pci 0000:06:00.0: Falling back to user helper [ 375.755105] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2 [ 375.755107] ath10k_pci 0000:06:00.0: Falling back to user helper [ 435.850288] ath10k_pci 0000:06:00.0: failed to load spec board file, falling back to generic: -11 [ 435.850328] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2 [ 435.850330] ath10k_pci 0000:06:00.0: Falling back to user helper [ 495.945454] ath10k_pci 0000:06:00.0: could not fetch firmware file 'ath10k/QCA6174/hw2.1/firmware-5.bin': -11 [ 497.140018] ath10k_pci 0000:06:00.0: qca6174 hw2.1 (0x05010000, 0x003405ff, 168c:003e:1a56:1525 fallback) fw killer-n1525-fw api 4 htt-ver 3.0 wmi-op 4 htt-op 3 cal otp max-sta 32 features \xffffff80\xffffffd4\xffffffa8\xfffffff9\xffffff88\xffffffff\xffffffff [ 497.140021] ath10k_pci 0000:06:00.0: debug 1 debugfs 1 tracing 1 dfs 0 testmode 0 [ 497.218423] ath: EEPROM regdomain: 0x6c [ 497.218426] ath: EEPROM indicates we should expect a direct regpair map [ 497.218427] ath: Country alpha2 being used: 00 [ 497.218427] ath: Regpair used: 0x6c [ 497.222363] ath10k_pci 0000:06:00.0 wlp6s0: renamed from wlan0 [ 1349.087696] ath10k_pci 0000:06:00.0: no channel configured; ignoring
frame(s)!
Best Regards
Quoted 75 lines · Alexandre Maloteaux
Yes sorry i reposted on the mailing list as soon as i noticed the mistake :)
Quoted 71 lines · Michal Kazior
Try not to email me privately when discussing in public unless there's a good reason to do so, please.
Quoted 28 lines · Alexandre Maloteaux
Hi Michal
With latest kvalo-master. I m getting this error on boot and after irq_mode=1
I used sumdog firmwares from github :[ 255.996373] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002) [ 255.997129] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 256.174560] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/cal-pci-0000:06:00.0.bin failed with error -2 [ 256.174562] ath10k_pci 0000:06:00.0: Falling back to user helper [ 316.269053] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2 [ 316.269061] ath10k_pci 0000:06:00.0: Falling back to user helper [ 376.362848] ath10k_pci 0000:06:00.0: failed to load spec board file, falling back to generic: -11 [ 376.363326] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2 [ 376.363333] ath10k_pci 0000:06:00.0: Falling back to user helper [ 436.458041] ath10k_pci 0000:06:00.0: could not fetch firmware file 'ath10k/QCA6174/hw2.1/firmware-5.bin': -11 [ 437.634407] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 437.634415] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 438.634688] ath10k_pci 0000:06:00.0: failed to receive controlresponse completion, polling..
Quoted 8 lines
[ 438.634767] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 438.634790] ath10k_pci 0000:06:00.0: received unsolicited fw crash interrupt [ 439.636320] ath10k_pci 0000:06:00.0: Service connect timeout [ 439.636325] ath10k_pci 0000:06:00.0: failed to connect htt (-110) [ 439.706905] ath10k_pci 0000:06:00.0: could not init core (-110) [ 439.706929] ath10k_pci 0000:06:00.0: could not probe fw (-110)The above is previous attempt without
irq_modebeing set so can be ignored.Quoted 10 lines
[ 515.965549] ath10k_pci 0000:06:00.0: limiting irq mode to: 1[ 515.965557] ath10k_pci 0000:06:00.0: pci irq legacy interrupts 0 irq_mode 1 reset_mode 0 [ 516.202334] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/cal-pci-0000:06:00.0.bin failed with error -2 [ 516.202335] ath10k_pci 0000:06:00.0: Falling back to user helper [ 576.296201] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2 [ 576.296210] ath10k_pci 0000:06:00.0: Falling back to user helperYou seem to be having really long timeouts when probing fw files. This shouldn't be a problem as far as functionality is concerned but can be really painful to wait all these delays.. I don't know why your system does that. I suspect your udev is broken and misconfigured.
Quoted 5 lines
[ 636.391328] ath10k_pci 0000:06:00.0: failed to load spec board file, falling back to generic: -11 [ 636.391402] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2 [ 636.391405] ath10k_pci 0000:06:00.0: Falling back to user helperI don't see fatal failure here. Everything up until this line is mere warnings. There should be more prints following this.
Michał
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 3 lines · Alexandre Maloteaux
0x003405ff, 168c:003e:1a56:1525 fallback) fw killer-n1525-fw api 4 htt-ver 3.0 wmi-op 4 htt-op 3 cal otp max-sta 32 features \xffffff80\xffffffd4\xffffffa8\xfffffff9\xffffff88\xffffffff\xffffffff
What's happening with the features string here? What might cause that?
Signature · 6 lines
Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 1 line
What's happening with the features string here? What might cause that?
I used the sumdog binaries from github,maybe this is related. I ll try with my own firmware-4.bin from dissect/assemble and board.bin from clevo driver and i ll report if i get the same string
Quoted 7 lines · Kalle Valo
Quoted 3 lines · Alexandre Maloteaux
0x003405ff, 168c:003e:1a56:1525 fallback) fw killer-n1525-fw api 4 htt-ver 3.0 wmi-op 4 htt-op 3 cal otp max-sta 32 features \xffffff80\xffffffd4\xffffffa8\xfffffff9\xffffff88\xffffffff\xffffffffWhat's happening with the features string here? What might cause that?
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Hi i would like to test with other board.bin but i m facing the timeout issue. Each time the ath10k_pci module fail with a firmware there is a timeout of 1 minute before testing the next one. Any idea what could help ?
[Fri Jul 24 11:10:02 2015] ath10k_pci 0000:06:00.0: pci irq legacy interrupts 0 irq_mode 1 reset_mode 0 [Fri Jul 24 11:10:03 2015] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/cal-pci-0000:06:00.0.bin failed with error -2 [Fri Jul 24 11:10:03 2015] ath10k_pci 0000:06:00.0: Falling back to user helper [Fri Jul 24 11:11:03 2015] ath10k_pci 0000:06:00.0: Direct firmware load for ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2 [Fri Jul 24 11:11:03 2015] ath10k_pci 0000:06:00.0: Falling back to user helper [Fri Jul 24 11:12:03 2015] ath10k_pci 0000:06:00.0: could not fetch firmware file 'ath10k/QCA6174/hw2.1/firmware-5.bin': -11 [Fri Jul 24 11:12:04 2015] ath10k_pci 0000:06:00.0: qca6174 hw2.1 (0x05010000, 0x003405ff, 168c:003e:1a56:1525) fw killer-n1525-fw api 4 htt-ver 3.0 wmi-op 4 htt-op 3 cal otp max-sta 32 features \xffffff80\xffffff94\xfffffff8\xffffff96\xffffff88\xffffffff\xffffffff [Fri Jul 24 11:12:04 2015] ath10k_pci 0000:06:00.0: debug 1 debugfs 1 tracing 1 dfs 0 testmode 0 [Fri Jul 24 11:12:04 2015] ath: EEPROM regdomain: 0x6c [Fri Jul 24 11:12:04 2015] ath: EEPROM indicates we should expect a direct regpair map [Fri Jul 24 11:12:04 2015] ath: Country alpha2 being used: 00 [Fri Jul 24 11:12:04 2015] ath: Regpair used: 0x6c [Fri Jul 24 11:12:04 2015] ath10k_pci 0000:06:00.0 wlp6s0: renamed from wlan0 [Fri Jul 24 11:14:42 2015] ath10k_pci 0000:06:00.0: no channel configured; ignoring frame(s)! [Fri Jul 24 11:19:57 2015] ath10k_pci 0000:06:00.0: no channel configured; ignoring frame(s)! [Fri Jul 24 11:21:00 2015] ath10k_pci 0000:06:00.0: no channel configured; ignoring frame(s)! [Fri Jul 24 11:21:00 2015] ath10k_pci 0000:06:00.0: no channel configured; ignoring frame(s)! [Fri Jul 24 11:34:54 2015] CPU: 2 PID: 14153 Comm: hexchat Tainted: P O 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+ #4 [Fri Jul 24 11:34:54 2015] [<ffffffff8156b3ee>] entry_SYSCALL_64_fastpath+0x12/0x71 [Fri Jul 24 11:37:50 2015] ath10k_pci 0000:06:00.0: no channel
configured; ignoring frame(s)!
Quoted 7 lines · Kalle Valo
Quoted 3 lines · Alexandre Maloteaux
0x003405ff, 168c:003e:1a56:1525 fallback) fw killer-n1525-fw api 4 htt-ver 3.0 wmi-op 4 htt-op 3 cal otp max-sta 32 features \xffffff80\xffffffd4\xffffffa8\xfffffff9\xffffff88\xffffffff\xffffffffWhat's happening with the features string here? What might cause that?
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k