Skip to contentSkip to conversation

QCA6174 hw2.1 on Clevo P750ZM

DISCUSSION Alexandre Maloteaux 3 participants 11 messages Jul 23, 2015 – Jul 24, 2015 3 messages not in the archive Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore
#0 lore raw

Hi

I just received a Clevo P750ZM (eurocom P5 pro) with a QCA6174

06:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 20)

Hi have tested the dissect/assemble procedure described here :

https://www.mail-archive.com/[email protected]/msg02283.html
https://askubuntu.com/questions/546813/killer-n1525-with-ubuntu-14-10

Im on Arch and i have tested with the Eurocom Drivers
(http://downloads.eurocom.com/support/drivers/zip/260/260_KillerWLAN_W864.zip)
and the sumdog blobs (https://github.com/sumdog/ath10k-firmware.git)
directly on those 3 firmwares
Arch official : 4.1.2-2-ARCH
kvalo master : 4.2.0-rc3
kvalo qca branch : 4.1.0-rc6

I have a different issue for each kernel and i have tested with all board.bin available but none worked :

ARCH official issue :

[   15.794214] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[   15.794528] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8
irq_mode 0 reset_mode 0
[   15.973369] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/cal-pci-0000:06:00.0.bin failed with error -2
[   17.152098] ath10k_pci 0000:06:00.0: firmware crashed! (uuid
845cf3fa-05bd-4eed-873b-763f94de2e76)
[   17.152101] ath10k_pci 0000:06:00.0: qca6174 hw2.1 (0x05010000,
0x003405ff) fw killer-n1525-fw api 4 htt 0.0 wmi 4 cal otp max_sta 32
[   17.152103] ath10k_pci 0000:06:00.0: debug 0 debugfs 1 tracing 0 dfs
0 testmode 0
[   17.154123] ath10k_pci 0000:06:00.0: firmware register dump:
[   17.154124] ath10k_pci 0000:06:00.0: [00]: 0x05010000 0x000015B3
0x0095186B 0x00955B31
[   17.154125] ath10k_pci 0000:06:00.0: [04]: 0x0095186B 0x00060130
0x00000010 0x0040AF04
[   17.154126] ath10k_pci 0000:06:00.0: [08]: 0x00000018 0x00000001
0x00000001 0x00412250
[   17.154127] ath10k_pci 0000:06:00.0: [12]: 0x00000009 0x00000000
0x0096C09C 0x0096C0A7
[   17.154128] ath10k_pci 0000:06:00.0: [16]: 0x0096BDBC 0x0092C07A
0x00000000 0x00000000
[   17.154128] ath10k_pci 0000:06:00.0: [20]: 0x4095186B 0x0040E160
0x0041F82C 0x00000001
[   17.154129] ath10k_pci 0000:06:00.0: [24]: 0x80936238 0x0040E1C0
0x00000000 0xC095186B
[   17.154130] ath10k_pci 0000:06:00.0: [28]: 0x80936361 0x0040E1E0
0x00000000 0x0041C8DC
[   17.154131] ath10k_pci 0000:06:00.0: [32]: 0x80934A67 0x0040E200
0x00436DF0 0x0040E250
[   17.154132] ath10k_pci 0000:06:00.0: [36]: 0x809A5DC2 0x0040E250
0x004275C0 0x00000001
[   17.154133] ath10k_pci 0000:06:00.0: [40]: 0x809A5E1A 0x0040E290
0x00426F50 0x00000004
[   17.154133] ath10k_pci 0000:06:00.0: [44]: 0x809A5EFA 0x0040E2B0
0x00426F50 0x0041C8DC
[   17.154134] ath10k_pci 0000:06:00.0: [48]: 0x800A0909 0x0040E2D0
0x00426F50 0x004275B0
[   17.154135] ath10k_pci 0000:06:00.0: [52]: 0x800A024A 0x0040E2F0
0x0041ABB0 0x00420420
[   17.154136] ath10k_pci 0000:06:00.0: [56]: 0x809287D9 0x0040E310
0x00000000 0x00400000
[   18.144916] ath10k_pci 0000:06:00.0: failed to receive control
response completion, polling..
[   19.146522] ath10k_pci 0000:06:00.0: ctl_resp never came in (-110)
[   19.146525] ath10k_pci 0000:06:00.0: failed to connect to HTC: -110
[   19.217113] ath10k_pci 0000:06:00.0: could not init core (-110)
[   19.217137] ath10k_pci 0000:06:00.0: could not probe fw (-110)
[   19.227008] ath10k_pci 0000:06:00.0: cannot restart a device that

hasn't been started

kvalo master :

[    0.000000] Linux version 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+
(root@z1kadev) (gcc version 5.1.0 (GCC) ) #2 SMP PREEMPT Tue Jul 21
15:07:02 WAT 2015
[   12.381604] systemd[1]: cups.path: Cannot add dependency job,
ignoring: Unit cups.path failed to load: No such file or directory.
[   12.595610] ath3k: probe of 3-7:1.0 failed with error -22
[   12.595637] usbcore: registered new interface driver ath3k
[   12.627163] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[   12.627915] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8
irq_mode 0 reset_mode 0
[   12.822155] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/cal-pci-0000:06:00.0.bin failed with error -2
[   12.822158] ath10k_pci 0000:06:00.0: Falling back to user helper
[   72.915990] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2
[   72.915993] ath10k_pci 0000:06:00.0: Falling back to user helper
[  133.010331] ath10k_pci 0000:06:00.0: failed to load spec board file,
falling back to generic: -11
[  133.010647] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2
[  133.010649] ath10k_pci 0000:06:00.0: Falling back to user helper
[  193.105501] ath10k_pci 0000:06:00.0: could not fetch firmware file
'ath10k/QCA6174/hw2.1/firmware-5.bin': -11
[  194.276201] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  194.276209] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  195.275581] ath10k_pci 0000:06:00.0: failed to receive control
response completion, polling..
[  195.275699] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  196.277176] ath10k_pci 0000:06:00.0: Service connect timeout
[  196.277179] ath10k_pci 0000:06:00.0: failed to connect htt (-110)
[  196.347791] ath10k_pci 0000:06:00.0: could not init core (-110)
[  196.347819] ath10k_pci 0000:06:00.0: could not probe fw (-110)

kvalo qca branch :

[  386.639108] ath10k_pci 0000:06:00.0: failed to receive initialized
event from target: b8600448
[  386.639110] ath10k_pci 0000:06:00.0: failed to wait for target after
cold reset: -110
[  386.639110] ath10k_pci 0000:06:00.0: failed to reset chip: -110
[  386.639203] ath10k_pci: probe of 0000:06:00.0 failed with error -110
[  419.547152] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8
irq_mode 0 reset_mode 0
[  422.565998] ath10k_pci 0000:06:00.0: failed to receive initialized
event from target: b8600448
[  422.566000] ath10k_pci 0000:06:00.0: failed to wait for target after
cold reset: -110
[  422.566001] ath10k_pci 0000:06:00.0: failed to reset chip: -110
[  422.566096] ath10k_pci: probe of 0000:06:00.0 failed with error -110

im getting only the cal issue on the kvalo master if i copy firmware-4.bin to firmware-5.bin. If i copy fw-1.bin from dissect.py to cal-pci-0000:06:00.0.bin . I m getting the issue with the official arch...

Hope somebody can help

Best Regards

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#1 lore raw
Quoted 11 lines · Alexandre Maloteaux

Hi

I just received a Clevo P750ZM (eurocom P5 pro) with a QCA6174

06:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 20)

Hi have tested the dissect/assemble procedure described here :

https://www.mail-archive.com/[email protected]/msg02283.html
https://askubuntu.com/questions/546813/killer-n1525-with-ubuntu-14-10

There's an unofficial image that's lying in a pull request on github[1] you could use. It probably needs skip_otp parameter to be used.

Quoted 9 lines

Im on Arch and i have tested with the Eurocom Drivers
(http://downloads.eurocom.com/support/drivers/zip/260/260_KillerWLAN_W864.zip)
and the sumdog blobs (https://github.com/sumdog/ath10k-firmware.git)
directly on those 3 firmwares
Arch official : 4.1.2-2-ARCH
kvalo master : 4.2.0-rc3
kvalo qca branch : 4.1.0-rc6

Quoted 4 lines

I have a different issue for each kernel and i have tested with all board.bin available but none worked :

ARCH official issue :

[snip]

This won't work. 4.1 doesn't contain the necessary patch[2].

Quoted 32 lines

kvalo master :

[    0.000000] Linux version 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+
(root@z1kadev) (gcc version 5.1.0 (GCC) ) #2 SMP PREEMPT Tue Jul 21
15:07:02 WAT 2015
[   12.381604] systemd[1]: cups.path: Cannot add dependency job,
ignoring: Unit cups.path failed to load: No such file or directory.
[   12.595610] ath3k: probe of 3-7:1.0 failed with error -22
[   12.595637] usbcore: registered new interface driver ath3k
[   12.627163] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[   12.627915] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8
irq_mode 0 reset_mode 0
[   12.822155] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/cal-pci-0000:06:00.0.bin failed with error -2
[   12.822158] ath10k_pci 0000:06:00.0: Falling back to user helper
[   72.915990] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2
[   72.915993] ath10k_pci 0000:06:00.0: Falling back to user helper
[  133.010331] ath10k_pci 0000:06:00.0: failed to load spec board file,
falling back to generic: -11
[  133.010647] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2
[  133.010649] ath10k_pci 0000:06:00.0: Falling back to user helper
[  193.105501] ath10k_pci 0000:06:00.0: could not fetch firmware file
'ath10k/QCA6174/hw2.1/firmware-5.bin': -11
[  194.276201] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  194.276209] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  195.275581] ath10k_pci 0000:06:00.0: failed to receive control
response completion, polling..
[  195.275699] ath10k_pci 0000:06:00.0: received unsolicited fw crash
Quoted 1 line

interrupt

This looks interesting. Can you please:

rmmod ath10k_pci
modprobe ath10k_pci irq_mode=1

Msi range handling could be broken on this hw. If so we'll need to blacklist it.

Quoted 22 lines
[  196.277176] ath10k_pci 0000:06:00.0: Service connect timeout
[  196.277179] ath10k_pci 0000:06:00.0: failed to connect htt (-110)
[  196.347791] ath10k_pci 0000:06:00.0: could not init core (-110)
[  196.347819] ath10k_pci 0000:06:00.0: could not probe fw (-110)

kvalo qca branch :

[  386.639108] ath10k_pci 0000:06:00.0: failed to receive initialized
event from target: b8600448
[  386.639110] ath10k_pci 0000:06:00.0: failed to wait for target after
cold reset: -110
[  386.639110] ath10k_pci 0000:06:00.0: failed to reset chip: -110
[  386.639203] ath10k_pci: probe of 0000:06:00.0 failed with error -110
[  419.547152] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8
irq_mode 0 reset_mode 0
[  422.565998] ath10k_pci 0000:06:00.0: failed to receive initialized
event from target: b8600448
[  422.566000] ath10k_pci 0000:06:00.0: failed to wait for target after
cold reset: -110
[  422.566001] ath10k_pci 0000:06:00.0: failed to reset chip: -110
[  422.566096] ath10k_pci: probe of 0000:06:00.0 failed with error -110
Quoted 2 lines

im getting only the cal issue on the kvalo master if i copy firmware-4.bin to firmware-5.bin.

Don't just go about renaming firmware filenames like that, please. It's used to prevent older ath10k using newer firmware images which it wouldn't handle anyway.

Quoted 2 lines

If i copy fw-1.bin from dissect.py to
cal-pci-0000:06:00.0.bin . I m getting the issue with the official arch...

Uhm, that's wrong. Don't use cal-pci-xxx unless you know what you're doing.

fw-1 and fw-2 from dissect are otp and main program binaries. cal-pci-xxx is just calibration data blob. This is something entirely else.

If you see OTP failure you need to either set up adequate fw_feature flag in the firmware-X.bin or pass skip_otp=y parameter while probing ath10k_core module.

[1]: https://github.com/kvalo/ath10k-firmware/pull/2
[2]: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/net/wireless/ath/ath10k/pci.c?id=11a002efbaa7fbd9f6e616695ab42aa9f1caf060

Michał

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#2 lore raw

Hi Michal

Quoted 3 lines

There's an unofficial image that's lying in a pull request on github[1] you could use. It probably needs skip_otp parameter to be used.

I think this is the sumdog firmwares; i tested them and i made all the test with the skip_otp parameter

Quoted 6 lines

This looks interesting. Can you please:

rmmod ath10k_pci
modprobe ath10k_pci irq_mode=1

Msi range handling could be broken on this hw. If so we'll need to blacklist it.

Still the same issue :

[  213.889825] ath10k_pci 0000:06:00.0: limiting irq mode to: 1
[  213.889833] ath10k_pci 0000:06:00.0: pci irq legacy interrupts 0
irq_mode 1 reset_mode 0
[  216.907165] ath10k_pci 0000:06:00.0: failed to receive initialized
event from target: b8600448
[  216.907166] ath10k_pci 0000:06:00.0: failed to wait for target after
cold reset: -110
[  216.907167] ath10k_pci 0000:06:00.0: failed to reset chip: -110
[  216.907220] ath10k_pci: probe of 0000:06:00.0 failed with error -110
Quoted 3 lines

Don't just go about renaming firmware filenames like that, please. It's used to prevent older ath10k using newer firmware images which it wouldn't handle anyway.

upon those instructions :
https://github.com/kvalo/ath10k-firmware/pull/2
copying firmware-4.bin to firmware-5.bin seems to help for some users

Best Regards

Quoted 117 lines · Michal Kazior
Quoted 11 lines · Alexandre Maloteaux

Hi

I just received a Clevo P750ZM (eurocom P5 pro) with a QCA6174

06:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 20)

Hi have tested the dissect/assemble procedure described here :

https://www.mail-archive.com/[email protected]/msg02283.html
https://askubuntu.com/questions/546813/killer-n1525-with-ubuntu-14-10

There's an unofficial image that's lying in a pull request on github[1] you could use. It probably needs skip_otp parameter to be used.

Quoted 8 lines

Im on Arch and i have tested with the Eurocom Drivers
(http://downloads.eurocom.com/support/drivers/zip/260/260_KillerWLAN_W864.zip)
and the sumdog blobs (https://github.com/sumdog/ath10k-firmware.git)
directly on those 3 firmwares
Arch official : 4.1.2-2-ARCH
kvalo master : 4.2.0-rc3
kvalo qca branch : 4.1.0-rc6

Quoted 4 lines

I have a different issue for each kernel and i have tested with all board.bin available but none worked :

ARCH official issue :

[snip]

This won't work. 4.1 doesn't contain the necessary patch[2].

Quoted 32 lines

kvalo master :

[    0.000000] Linux version 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+
(root@z1kadev) (gcc version 5.1.0 (GCC) ) #2 SMP PREEMPT Tue Jul 21
15:07:02 WAT 2015
[   12.381604] systemd[1]: cups.path: Cannot add dependency job,
ignoring: Unit cups.path failed to load: No such file or directory.
[   12.595610] ath3k: probe of 3-7:1.0 failed with error -22
[   12.595637] usbcore: registered new interface driver ath3k
[   12.627163] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[   12.627915] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8
irq_mode 0 reset_mode 0
[   12.822155] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/cal-pci-0000:06:00.0.bin failed with error -2
[   12.822158] ath10k_pci 0000:06:00.0: Falling back to user helper
[   72.915990] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2
[   72.915993] ath10k_pci 0000:06:00.0: Falling back to user helper
[  133.010331] ath10k_pci 0000:06:00.0: failed to load spec board file,
falling back to generic: -11
[  133.010647] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2
[  133.010649] ath10k_pci 0000:06:00.0: Falling back to user helper
[  193.105501] ath10k_pci 0000:06:00.0: could not fetch firmware file
'ath10k/QCA6174/hw2.1/firmware-5.bin': -11
[  194.276201] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  194.276209] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  195.275581] ath10k_pci 0000:06:00.0: failed to receive control
response completion, polling..
[  195.275699] ath10k_pci 0000:06:00.0: received unsolicited fw crash
Quoted 1 line

interrupt

This looks interesting. Can you please:

rmmod ath10k_pci
modprobe ath10k_pci irq_mode=1

Msi range handling could be broken on this hw. If so we'll need to blacklist it.

Quoted 22 lines
[  196.277176] ath10k_pci 0000:06:00.0: Service connect timeout
[  196.277179] ath10k_pci 0000:06:00.0: failed to connect htt (-110)
[  196.347791] ath10k_pci 0000:06:00.0: could not init core (-110)
[  196.347819] ath10k_pci 0000:06:00.0: could not probe fw (-110)

kvalo qca branch :

[  386.639108] ath10k_pci 0000:06:00.0: failed to receive initialized
event from target: b8600448
[  386.639110] ath10k_pci 0000:06:00.0: failed to wait for target after
cold reset: -110
[  386.639110] ath10k_pci 0000:06:00.0: failed to reset chip: -110
[  386.639203] ath10k_pci: probe of 0000:06:00.0 failed with error -110
[  419.547152] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8
irq_mode 0 reset_mode 0
[  422.565998] ath10k_pci 0000:06:00.0: failed to receive initialized
event from target: b8600448
[  422.566000] ath10k_pci 0000:06:00.0: failed to wait for target after
cold reset: -110
[  422.566001] ath10k_pci 0000:06:00.0: failed to reset chip: -110
[  422.566096] ath10k_pci: probe of 0000:06:00.0 failed with error -110
Quoted 2 lines

im getting only the cal issue on the kvalo master if i copy firmware-4.bin to firmware-5.bin.

Don't just go about renaming firmware filenames like that, please. It's used to prevent older ath10k using newer firmware images which it wouldn't handle anyway.

Quoted 2 lines

If i copy fw-1.bin from dissect.py to
cal-pci-0000:06:00.0.bin . I m getting the issue with the official arch...

Uhm, that's wrong. Don't use cal-pci-xxx unless you know what you're doing.

fw-1 and fw-2 from dissect are otp and main program binaries. cal-pci-xxx is just calibration data blob. This is something entirely else.

If you see OTP failure you need to either set up adequate fw_feature flag in the firmware-X.bin or pass skip_otp=y parameter while probing ath10k_core module.

Quoted 6 lines

[1]: https://github.com/kvalo/ath10k-firmware/pull/2
[2]: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/net/wireless/ath/ath10k/pci.c?id=11a002efbaa7fbd9f6e616695ab42aa9f1caf060

Michał

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#3 lore raw
Quoted 16 lines · Alexandre Maloteaux

Hi Michal

Quoted 3 lines

There's an unofficial image that's lying in a pull request on github[1] you could use. It probably needs skip_otp parameter to be used.

I think this is the sumdog firmwares; i tested them and i made all the test with the skip_otp parameter

Quoted 6 lines

This looks interesting. Can you please:

rmmod ath10k_pci
modprobe ath10k_pci irq_mode=1

Msi range handling could be broken on this hw. If so we'll need to blacklist it.

Quoted 7 lines

Still the same issue :

[  213.889825] ath10k_pci 0000:06:00.0: limiting irq mode to: 1
[  213.889833] ath10k_pci 0000:06:00.0: pci irq legacy interrupts 0
irq_mode 1 reset_mode 0
[  216.907165] ath10k_pci 0000:06:00.0: failed to receive initialized

event from target: b8600448

Whoa. This value cannot be possibly correct. The register shouldn't ever take such values.

What is the head commit id (kvalo/master) that you've used? You might be missing a patches[1][2] that fixed a recent breakage in the dev tree.

Can you make sure you test df0cf3c1249bc0c3a5a2077d6901eb90c19b7fda, please?

When you do, and it still crashes, can you get traces[3], please?

Quoted 6 lines
[  216.907166] ath10k_pci 0000:06:00.0: failed to wait for target after
cold reset: -110
[  216.907167] ath10k_pci 0000:06:00.0: failed to reset chip: -110
[  216.907220] ath10k_pci: probe of 0000:06:00.0 failed with error -110
Quoted 6 lines
Quoted 3 lines

Don't just go about renaming firmware filenames like that, please. It's used to prevent older ath10k using newer firmware images which it wouldn't handle anyway.

upon those instructions :
https://github.com/kvalo/ath10k-firmware/pull/2
copying firmware-4.bin to firmware-5.bin seems to help for some users

It matters not. Driver tries to fallback until it finds any firmware-X. If it doesn't find firmware-5.bin it'll try to load firmware-4.bin, etc. This will be accompanied by a warning in kernel log for each fallback attempt but it's harmless. Driver doesn't distinguish firmware functionality by filename numbering.

[1]: https://github.com/kvalo/ath/commit/a052158aa981ca470673f49c636b289ee16894ea
[2]: https://github.com/kvalo/ath/commit/3c7e256a6de378e01098147527082abae05b146e
[3]: https://wireless.wiki.kernel.org/en/users/drivers/ath10k/debug#tracing

Michał

Quoted 129 lines

Best Regards

Quoted 123 lines · Michal Kazior
Quoted 11 lines · Alexandre Maloteaux

Hi

I just received a Clevo P750ZM (eurocom P5 pro) with a QCA6174

06:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 20)

Hi have tested the dissect/assemble procedure described here :

https://www.mail-archive.com/[email protected]/msg02283.html
https://askubuntu.com/questions/546813/killer-n1525-with-ubuntu-14-10

There's an unofficial image that's lying in a pull request on github[1] you could use. It probably needs skip_otp parameter to be used.

Quoted 8 lines

Im on Arch and i have tested with the Eurocom Drivers
(http://downloads.eurocom.com/support/drivers/zip/260/260_KillerWLAN_W864.zip)
and the sumdog blobs (https://github.com/sumdog/ath10k-firmware.git)
directly on those 3 firmwares
Arch official : 4.1.2-2-ARCH
kvalo master : 4.2.0-rc3
kvalo qca branch : 4.1.0-rc6

Quoted 4 lines

I have a different issue for each kernel and i have tested with all board.bin available but none worked :

ARCH official issue :

[snip]

This won't work. 4.1 doesn't contain the necessary patch[2].

Quoted 32 lines

kvalo master :

[    0.000000] Linux version 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+
(root@z1kadev) (gcc version 5.1.0 (GCC) ) #2 SMP PREEMPT Tue Jul 21
15:07:02 WAT 2015
[   12.381604] systemd[1]: cups.path: Cannot add dependency job,
ignoring: Unit cups.path failed to load: No such file or directory.
[   12.595610] ath3k: probe of 3-7:1.0 failed with error -22
[   12.595637] usbcore: registered new interface driver ath3k
[   12.627163] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[   12.627915] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8
irq_mode 0 reset_mode 0
[   12.822155] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/cal-pci-0000:06:00.0.bin failed with error -2
[   12.822158] ath10k_pci 0000:06:00.0: Falling back to user helper
[   72.915990] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2
[   72.915993] ath10k_pci 0000:06:00.0: Falling back to user helper
[  133.010331] ath10k_pci 0000:06:00.0: failed to load spec board file,
falling back to generic: -11
[  133.010647] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2
[  133.010649] ath10k_pci 0000:06:00.0: Falling back to user helper
[  193.105501] ath10k_pci 0000:06:00.0: could not fetch firmware file
'ath10k/QCA6174/hw2.1/firmware-5.bin': -11
[  194.276201] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  194.276209] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  195.275581] ath10k_pci 0000:06:00.0: failed to receive control
response completion, polling..
[  195.275699] ath10k_pci 0000:06:00.0: received unsolicited fw crash
Quoted 1 line

interrupt

This looks interesting. Can you please:

rmmod ath10k_pci
modprobe ath10k_pci irq_mode=1

Msi range handling could be broken on this hw. If so we'll need to blacklist it.

Quoted 22 lines
[  196.277176] ath10k_pci 0000:06:00.0: Service connect timeout
[  196.277179] ath10k_pci 0000:06:00.0: failed to connect htt (-110)
[  196.347791] ath10k_pci 0000:06:00.0: could not init core (-110)
[  196.347819] ath10k_pci 0000:06:00.0: could not probe fw (-110)

kvalo qca branch :

[  386.639108] ath10k_pci 0000:06:00.0: failed to receive initialized
event from target: b8600448
[  386.639110] ath10k_pci 0000:06:00.0: failed to wait for target after
cold reset: -110
[  386.639110] ath10k_pci 0000:06:00.0: failed to reset chip: -110
[  386.639203] ath10k_pci: probe of 0000:06:00.0 failed with error -110
[  419.547152] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8
irq_mode 0 reset_mode 0
[  422.565998] ath10k_pci 0000:06:00.0: failed to receive initialized
event from target: b8600448
[  422.566000] ath10k_pci 0000:06:00.0: failed to wait for target after
cold reset: -110
[  422.566001] ath10k_pci 0000:06:00.0: failed to reset chip: -110
[  422.566096] ath10k_pci: probe of 0000:06:00.0 failed with error -110
Quoted 2 lines

im getting only the cal issue on the kvalo master if i copy firmware-4.bin to firmware-5.bin.

Don't just go about renaming firmware filenames like that, please. It's used to prevent older ath10k using newer firmware images which it wouldn't handle anyway.

Quoted 2 lines

If i copy fw-1.bin from dissect.py to
cal-pci-0000:06:00.0.bin . I m getting the issue with the official arch...

Uhm, that's wrong. Don't use cal-pci-xxx unless you know what you're doing.

fw-1 and fw-2 from dissect are otp and main program binaries. cal-pci-xxx is just calibration data blob. This is something entirely else.

If you see OTP failure you need to either set up adequate fw_feature flag in the firmware-X.bin or pass skip_otp=y parameter while probing ath10k_core module.

[1]: https://github.com/kvalo/ath10k-firmware/pull/2
[2]: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/net/wireless/ath/ath10k/pci.c?id=11a002efbaa7fbd9f6e616695ab42aa9f1caf060

Michał

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#4 lore raw

Hi

Quoted 3 lines

What is the head commit id (kvalo/master) that you've used? You might be missing a patches[1][2] that fixed a recent breakage in the dev tree.

I m getting this issue only with kvalo-qca branch.

With kvalo master i m getting this issue below

Do you still want me to do the tracing part on kvalo-qca branch ?

kvalo-master :

0.000000] Linux version 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+
(root@z1kadev) (gcc version 5.1.0 (GCC) ) #2 SMP PREEMPT Tue Jul 21 15:07:02 WAT 2015

[   12.381604] systemd[1]: cups.path: Cannot add dependency job,
ignoring: Unit cups.path failed to load: No such file or directory.
[   12.595610] ath3k: probe of 3-7:1.0 failed with error -22
[   12.595637] usbcore: registered new interface driver ath3k
[   12.627163] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[   12.627915] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8
irq_mode 0 reset_mode 0
[   12.822155] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/cal-pci-0000:06:00.0.bin failed with error -2
[   12.822158] ath10k_pci 0000:06:00.0: Falling back to user helper
[   72.915990] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2
[   72.915993] ath10k_pci 0000:06:00.0: Falling back to user helper
[  133.010331] ath10k_pci 0000:06:00.0: failed to load spec board file,
falling back to generic: -11
[  133.010647] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2
[  133.010649] ath10k_pci 0000:06:00.0: Falling back to user helper
[  193.105501] ath10k_pci 0000:06:00.0: could not fetch firmware file
'ath10k/QCA6174/hw2.1/firmware-5.bin': -11
[  194.276201] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  194.276209] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  195.275581] ath10k_pci 0000:06:00.0: failed to receive control
response completion, polling..
[  195.275699] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  196.277176] ath10k_pci 0000:06:00.0: Service connect timeout
[  196.277179] ath10k_pci 0000:06:00.0: failed to connect htt (-110)
[  196.347791] ath10k_pci 0000:06:00.0: could not init core (-110)
[  196.347819] ath10k_pci 0000:06:00.0: could not probe fw (-110)
Quoted 53 lines · Michal Kazior
Quoted 13 lines · Alexandre Maloteaux

Hi Michal

Quoted 3 lines

There's an unofficial image that's lying in a pull request on github[1] you could use. It probably needs skip_otp parameter to be used.

I think this is the sumdog firmwares; i tested them and i made all the test with the skip_otp parameter

Quoted 5 lines

This looks interesting. Can you please:

rmmod ath10k_pci
modprobe ath10k_pci irq_mode=1

Quoted 8 lines
Quoted 1 line

Msi range handling could be broken on this hw. If so we'll need to blacklist it.

Still the same issue :

[  213.889825] ath10k_pci 0000:06:00.0: limiting irq mode to: 1
[  213.889833] ath10k_pci 0000:06:00.0: pci irq legacy interrupts 0
irq_mode 1 reset_mode 0
[  216.907165] ath10k_pci 0000:06:00.0: failed to receive initialized

event from target: b8600448

Whoa. This value cannot be possibly correct. The register shouldn't ever take such values.

What is the head commit id (kvalo/master) that you've used? You might be missing a patches[1][2] that fixed a recent breakage in the dev tree.

Can you make sure you test df0cf3c1249bc0c3a5a2077d6901eb90c19b7fda, please?

When you do, and it still crashes, can you get traces[3], please?

Quoted 6 lines
[  216.907166] ath10k_pci 0000:06:00.0: failed to wait for target after
cold reset: -110
[  216.907167] ath10k_pci 0000:06:00.0: failed to reset chip: -110
[  216.907220] ath10k_pci: probe of 0000:06:00.0 failed with error -110
Quoted 6 lines
Quoted 3 lines

Don't just go about renaming firmware filenames like that, please. It's used to prevent older ath10k using newer firmware images which it wouldn't handle anyway.

upon those instructions :
https://github.com/kvalo/ath10k-firmware/pull/2
copying firmware-4.bin to firmware-5.bin seems to help for some users

It matters not. Driver tries to fallback until it finds any firmware-X. If it doesn't find firmware-5.bin it'll try to load firmware-4.bin, etc. This will be accompanied by a warning in kernel log for each fallback attempt but it's harmless. Driver doesn't distinguish firmware functionality by filename numbering.

Quoted 134 lines

[1]: https://github.com/kvalo/ath/commit/a052158aa981ca470673f49c636b289ee16894ea
[2]: https://github.com/kvalo/ath/commit/3c7e256a6de378e01098147527082abae05b146e
[3]: https://wireless.wiki.kernel.org/en/users/drivers/ath10k/debug#tracing

Michał

Quoted 127 lines

Best Regards

Quoted 123 lines · Michal Kazior
Quoted 11 lines · Alexandre Maloteaux

Hi

I just received a Clevo P750ZM (eurocom P5 pro) with a QCA6174

06:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 20)

Hi have tested the dissect/assemble procedure described here :

https://www.mail-archive.com/[email protected]/msg02283.html
https://askubuntu.com/questions/546813/killer-n1525-with-ubuntu-14-10

There's an unofficial image that's lying in a pull request on github[1] you could use. It probably needs skip_otp parameter to be used.

Quoted 8 lines

Im on Arch and i have tested with the Eurocom Drivers
(http://downloads.eurocom.com/support/drivers/zip/260/260_KillerWLAN_W864.zip)
and the sumdog blobs (https://github.com/sumdog/ath10k-firmware.git)
directly on those 3 firmwares
Arch official : 4.1.2-2-ARCH
kvalo master : 4.2.0-rc3
kvalo qca branch : 4.1.0-rc6

Quoted 4 lines

I have a different issue for each kernel and i have tested with all board.bin available but none worked :

ARCH official issue :

[snip]

This won't work. 4.1 doesn't contain the necessary patch[2].

Quoted 32 lines

kvalo master :

[    0.000000] Linux version 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+
(root@z1kadev) (gcc version 5.1.0 (GCC) ) #2 SMP PREEMPT Tue Jul 21
15:07:02 WAT 2015
[   12.381604] systemd[1]: cups.path: Cannot add dependency job,
ignoring: Unit cups.path failed to load: No such file or directory.
[   12.595610] ath3k: probe of 3-7:1.0 failed with error -22
[   12.595637] usbcore: registered new interface driver ath3k
[   12.627163] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[   12.627915] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8
irq_mode 0 reset_mode 0
[   12.822155] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/cal-pci-0000:06:00.0.bin failed with error -2
[   12.822158] ath10k_pci 0000:06:00.0: Falling back to user helper
[   72.915990] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2
[   72.915993] ath10k_pci 0000:06:00.0: Falling back to user helper
[  133.010331] ath10k_pci 0000:06:00.0: failed to load spec board file,
falling back to generic: -11
[  133.010647] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2
[  133.010649] ath10k_pci 0000:06:00.0: Falling back to user helper
[  193.105501] ath10k_pci 0000:06:00.0: could not fetch firmware file
'ath10k/QCA6174/hw2.1/firmware-5.bin': -11
[  194.276201] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  194.276209] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  195.275581] ath10k_pci 0000:06:00.0: failed to receive control
response completion, polling..
[  195.275699] ath10k_pci 0000:06:00.0: received unsolicited fw crash
Quoted 1 line

interrupt

This looks interesting. Can you please:

rmmod ath10k_pci
modprobe ath10k_pci irq_mode=1

Msi range handling could be broken on this hw. If so we'll need to blacklist it.

Quoted 22 lines
[  196.277176] ath10k_pci 0000:06:00.0: Service connect timeout
[  196.277179] ath10k_pci 0000:06:00.0: failed to connect htt (-110)
[  196.347791] ath10k_pci 0000:06:00.0: could not init core (-110)
[  196.347819] ath10k_pci 0000:06:00.0: could not probe fw (-110)

kvalo qca branch :

[  386.639108] ath10k_pci 0000:06:00.0: failed to receive initialized
event from target: b8600448
[  386.639110] ath10k_pci 0000:06:00.0: failed to wait for target after
cold reset: -110
[  386.639110] ath10k_pci 0000:06:00.0: failed to reset chip: -110
[  386.639203] ath10k_pci: probe of 0000:06:00.0 failed with error -110
[  419.547152] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8
irq_mode 0 reset_mode 0
[  422.565998] ath10k_pci 0000:06:00.0: failed to receive initialized
event from target: b8600448
[  422.566000] ath10k_pci 0000:06:00.0: failed to wait for target after
cold reset: -110
[  422.566001] ath10k_pci 0000:06:00.0: failed to reset chip: -110
[  422.566096] ath10k_pci: probe of 0000:06:00.0 failed with error -110
Quoted 2 lines

im getting only the cal issue on the kvalo master if i copy firmware-4.bin to firmware-5.bin.

Don't just go about renaming firmware filenames like that, please. It's used to prevent older ath10k using newer firmware images which it wouldn't handle anyway.

Quoted 2 lines

If i copy fw-1.bin from dissect.py to
cal-pci-0000:06:00.0.bin . I m getting the issue with the official arch...

Uhm, that's wrong. Don't use cal-pci-xxx unless you know what you're doing.

fw-1 and fw-2 from dissect are otp and main program binaries. cal-pci-xxx is just calibration data blob. This is something entirely else.

If you see OTP failure you need to either set up adequate fw_feature flag in the firmware-X.bin or pass skip_otp=y parameter while probing ath10k_core module.

[1]: https://github.com/kvalo/ath10k-firmware/pull/2
[2]: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drivers/net/wireless/ath/ath10k/pci.c?id=11a002efbaa7fbd9f6e616695ab42aa9f1caf060

Michał

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#5 lore raw
Quoted 11 lines · Alexandre Maloteaux

Hi

Quoted 3 lines

What is the head commit id (kvalo/master) that you've used? You might be missing a patches[1][2] that fixed a recent breakage in the dev tree.

I m getting this issue only with kvalo-qca branch.

With kvalo master i m getting this issue below

Do you still want me to do the tracing part on kvalo-qca branch ?

No need to test kvalo-qca. Just stick with kvalo-master, please.

Quoted 5 lines

kvalo-master :

0.000000] Linux version 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+
(root@z1kadev) (gcc version 5.1.0 (GCC) ) #2 SMP PREEMPT Tue Jul 21 15:07:02 WAT 2015

Quoted 7 lines
[   12.381604] systemd[1]: cups.path: Cannot add dependency job,
ignoring: Unit cups.path failed to load: No such file or directory.
[   12.595610] ath3k: probe of 3-7:1.0 failed with error -22
[   12.595637] usbcore: registered new interface driver ath3k
[   12.627163] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[   12.627915] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8

irq_mode 0 reset_mode 0

You didn't use the irq_mode=1 parameter. Can you re-test, please?

Michał

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

A message that is not in the archive (sent off-list or not yet received): [email protected]

#7 lore raw

Hi Michal

With latest kvalo-master. I m getting this error on boot and after irq_mode=1
I used sumdog firmwares from github :

[  255.996373] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[  255.997129] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8
irq_mode 0 reset_mode 0
[  256.174560] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/cal-pci-0000:06:00.0.bin failed with error -2
[  256.174562] ath10k_pci 0000:06:00.0: Falling back to user helper
[  316.269053] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2
[  316.269061] ath10k_pci 0000:06:00.0: Falling back to user helper
[  376.362848] ath10k_pci 0000:06:00.0: failed to load spec board file,
falling back to generic: -11
[  376.363326] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2
[  376.363333] ath10k_pci 0000:06:00.0: Falling back to user helper
[  436.458041] ath10k_pci 0000:06:00.0: could not fetch firmware file
'ath10k/QCA6174/hw2.1/firmware-5.bin': -11
[  437.634407] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  437.634415] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  438.634688] ath10k_pci 0000:06:00.0: failed to receive control
response completion, polling..
[  438.634767] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  438.634790] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  439.636320] ath10k_pci 0000:06:00.0: Service connect timeout
[  439.636325] ath10k_pci 0000:06:00.0: failed to connect htt (-110)
[  439.706905] ath10k_pci 0000:06:00.0: could not init core (-110)
[  439.706929] ath10k_pci 0000:06:00.0: could not probe fw (-110)
[  515.965549] ath10k_pci 0000:06:00.0: limiting irq mode to: 1
[  515.965557] ath10k_pci 0000:06:00.0: pci irq legacy interrupts 0
irq_mode 1 reset_mode 0
[  516.202334] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/cal-pci-0000:06:00.0.bin failed with error -2
[  516.202335] ath10k_pci 0000:06:00.0: Falling back to user helper
[  576.296201] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2
[  576.296210] ath10k_pci 0000:06:00.0: Falling back to user helper
[  636.391328] ath10k_pci 0000:06:00.0: failed to load spec board file,
falling back to generic: -11
[  636.391402] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2
[  636.391405] ath10k_pci 0000:06:00.0: Falling back to user helper

Best Regards

Quoted 26 lines · Michal Kazior
Quoted 10 lines · Alexandre Maloteaux

Hi

Quoted 3 lines

What is the head commit id (kvalo/master) that you've used? You might be missing a patches[1][2] that fixed a recent breakage in the dev tree.

I m getting this issue only with kvalo-qca branch.

With kvalo master i m getting this issue below

Do you still want me to do the tracing part on kvalo-qca branch ?

No need to test kvalo-qca. Just stick with kvalo-master, please.

Quoted 5 lines

kvalo-master :

0.000000] Linux version 4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+
(root@z1kadev) (gcc version 5.1.0 (GCC) ) #2 SMP PREEMPT Tue Jul 21 15:07:02 WAT 2015

Quoted 7 lines
[   12.381604] systemd[1]: cups.path: Cannot add dependency job,
ignoring: Unit cups.path failed to load: No such file or directory.
[   12.595610] ath3k: probe of 3-7:1.0 failed with error -22
[   12.595637] usbcore: registered new interface driver ath3k
[   12.627163] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[   12.627915] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8

irq_mode 0 reset_mode 0

Quoted 5 lines

You didn't use the irq_mode=1 parameter. Can you re-test, please?

Michał

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

A message that is not in the archive (sent off-list or not yet received): CA+BoTQmceF3xitMz1p6WFp3FVnOme4kpQaK=9ouAjyK4zwbvnQ@mail.gmail.com

A message that is not in the archive (sent off-list or not yet received): [email protected]

#10 lore raw

Hi Michal

It is finally working with irq_mode=1 and kvalo-master . The output is below; However it takes a lot of time to load/unload the device with successive firmwares. I ll try to find a solution for this on my own. Is it better to blacklist some module as you said earlier or create a modprobe.d rule with irq_mode=1 ?
Thanks a lot for knowledge and time shared !!!!!!

output :

[  315.417575] ath10k_pci 0000:06:00.0: pci irq legacy interrupts 0
irq_mode 1 reset_mode 0
[  315.661404] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/cal-pci-0000:06:00.0.bin failed with error -2
[  315.661406] ath10k_pci 0000:06:00.0: Falling back to user helper
[  375.755105] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2
[  375.755107] ath10k_pci 0000:06:00.0: Falling back to user helper
[  435.850288] ath10k_pci 0000:06:00.0: failed to load spec board file,
falling back to generic: -11
[  435.850328] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2
[  435.850330] ath10k_pci 0000:06:00.0: Falling back to user helper
[  495.945454] ath10k_pci 0000:06:00.0: could not fetch firmware file
'ath10k/QCA6174/hw2.1/firmware-5.bin': -11
[  497.140018] ath10k_pci 0000:06:00.0: qca6174 hw2.1 (0x05010000,
0x003405ff, 168c:003e:1a56:1525 fallback) fw killer-n1525-fw api 4
htt-ver 3.0 wmi-op 4 htt-op 3 cal otp max-sta 32 features
\xffffff80\xffffffd4\xffffffa8\xfffffff9\xffffff88\xffffffff\xffffffff
[  497.140021] ath10k_pci 0000:06:00.0: debug 1 debugfs 1 tracing 1 dfs
0 testmode 0
[  497.218423] ath: EEPROM regdomain: 0x6c
[  497.218426] ath: EEPROM indicates we should expect a direct regpair map
[  497.218427] ath: Country alpha2 being used: 00
[  497.218427] ath: Regpair used: 0x6c
[  497.222363] ath10k_pci 0000:06:00.0 wlp6s0: renamed from wlan0
[ 1349.087696] ath10k_pci 0000:06:00.0: no channel configured; ignoring

frame(s)!

Best Regards

Quoted 75 lines · Alexandre Maloteaux

Yes sorry i reposted on the mailing list as soon as i noticed the mistake :)

Quoted 71 lines · Michal Kazior

Try not to email me privately when discussing in public unless there's a good reason to do so, please.

Quoted 28 lines · Alexandre Maloteaux

Hi Michal

With latest kvalo-master. I m getting this error on boot and after irq_mode=1
I used sumdog firmwares from github :

[ 255.996373] ath10k_pci 0000:06:00.0: enabling device (0000 -> 0002)
[  255.997129] ath10k_pci 0000:06:00.0: pci irq msi-x interrupts 8
irq_mode 0 reset_mode 0
[  256.174560] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/cal-pci-0000:06:00.0.bin failed with error -2
[ 256.174562] ath10k_pci 0000:06:00.0: Falling back to user helper
[  316.269053] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2
[  316.269061] ath10k_pci 0000:06:00.0: Falling back to user helper
[  376.362848] ath10k_pci 0000:06:00.0: failed to load spec board file,
falling back to generic: -11
[  376.363326] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2
[  376.363333] ath10k_pci 0000:06:00.0: Falling back to user helper
[  436.458041] ath10k_pci 0000:06:00.0: could not fetch firmware file
'ath10k/QCA6174/hw2.1/firmware-5.bin': -11
[  437.634407] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  437.634415] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  438.634688] ath10k_pci 0000:06:00.0: failed to receive control

response completion, polling..

Quoted 8 lines
[  438.634767] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  438.634790] ath10k_pci 0000:06:00.0: received unsolicited fw crash
interrupt
[  439.636320] ath10k_pci 0000:06:00.0: Service connect timeout
[  439.636325] ath10k_pci 0000:06:00.0: failed to connect htt (-110)
[  439.706905] ath10k_pci 0000:06:00.0: could not init core (-110)
[  439.706929] ath10k_pci 0000:06:00.0: could not probe fw (-110)

The above is previous attempt without irq_mode being set so can be ignored.

Quoted 10 lines
[  515.965549] ath10k_pci 0000:06:00.0: limiting irq mode to: 1
[  515.965557] ath10k_pci 0000:06:00.0: pci irq legacy interrupts 0
irq_mode 1 reset_mode 0
[  516.202334] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/cal-pci-0000:06:00.0.bin failed with error -2
[ 516.202335] ath10k_pci 0000:06:00.0: Falling back to user helper
[ 576.296201] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/board-pci-168c:003e:1a56:1525.bin failed with error -2
[ 576.296210] ath10k_pci 0000:06:00.0: Falling back to user helper

You seem to be having really long timeouts when probing fw files. This shouldn't be a problem as far as functionality is concerned but can be really painful to wait all these delays.. I don't know why your system does that. I suspect your udev is broken and misconfigured.

Quoted 5 lines
[ 636.391328] ath10k_pci 0000:06:00.0: failed to load spec board file,
falling back to generic: -11
[ 636.391402] ath10k_pci 0000:06:00.0: Direct firmware load for
ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2
[ 636.391405] ath10k_pci 0000:06:00.0: Falling back to user helper

I don't see fatal failure here. Everything up until this line is mere warnings. There should be more prints following this.

Michał

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#11 lore raw
Quoted 3 lines · Alexandre Maloteaux

0x003405ff, 168c:003e:1a56:1525 fallback) fw killer-n1525-fw api 4 htt-ver 3.0 wmi-op 4 htt-op 3 cal otp max-sta 32 features \xffffff80\xffffffd4\xffffffa8\xfffffff9\xffffff88\xffffffff\xffffffff

What's happening with the features string here? What might cause that?

Signature · 6 lines
Kalle Valo

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#12 lore raw
Quoted 1 line

What's happening with the features string here? What might cause that?

I used the sumdog binaries from github,maybe this is related. I ll try with my own firmware-4.bin from dissect/assemble and board.bin from clevo driver and i ll report if i get the same string

Quoted 7 lines · Kalle Valo
Quoted 3 lines · Alexandre Maloteaux

0x003405ff, 168c:003e:1a56:1525 fallback) fw killer-n1525-fw api 4 htt-ver 3.0 wmi-op 4 htt-op 3 cal otp max-sta 32 features \xffffff80\xffffffd4\xffffffa8\xfffffff9\xffffff88\xffffffff\xffffffff

What's happening with the features string here? What might cause that?

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#13 lore raw
In reply to Kalle Valo

Hi i would like to test with other board.bin but i m facing the timeout issue. Each time the ath10k_pci module fail with a firmware there is a timeout of 1 minute before testing the next one. Any idea what could help ?

[Fri Jul 24 11:10:02 2015] ath10k_pci 0000:06:00.0: pci irq legacy
interrupts 0 irq_mode 1 reset_mode 0
[Fri Jul 24 11:10:03 2015] ath10k_pci 0000:06:00.0: Direct firmware load
for ath10k/cal-pci-0000:06:00.0.bin failed with error -2
[Fri Jul 24 11:10:03 2015] ath10k_pci 0000:06:00.0: Falling back to user
helper
[Fri Jul 24 11:11:03 2015] ath10k_pci 0000:06:00.0: Direct firmware load
for ath10k/QCA6174/hw2.1/firmware-5.bin failed with error -2
[Fri Jul 24 11:11:03 2015] ath10k_pci 0000:06:00.0: Falling back to user
helper
[Fri Jul 24 11:12:03 2015] ath10k_pci 0000:06:00.0: could not fetch
firmware file 'ath10k/QCA6174/hw2.1/firmware-5.bin': -11
[Fri Jul 24 11:12:04 2015] ath10k_pci 0000:06:00.0: qca6174 hw2.1
(0x05010000, 0x003405ff, 168c:003e:1a56:1525) fw killer-n1525-fw api 4
htt-ver 3.0 wmi-op 4 htt-op 3 cal otp max-sta 32 features
\xffffff80\xffffff94\xfffffff8\xffffff96\xffffff88\xffffffff\xffffffff
[Fri Jul 24 11:12:04 2015] ath10k_pci 0000:06:00.0: debug 1 debugfs 1
tracing 1 dfs 0 testmode 0
[Fri Jul 24 11:12:04 2015] ath: EEPROM regdomain: 0x6c
[Fri Jul 24 11:12:04 2015] ath: EEPROM indicates we should expect a
direct regpair map
[Fri Jul 24 11:12:04 2015] ath: Country alpha2 being used: 00
[Fri Jul 24 11:12:04 2015] ath: Regpair used: 0x6c
[Fri Jul 24 11:12:04 2015] ath10k_pci 0000:06:00.0 wlp6s0: renamed from
wlan0
[Fri Jul 24 11:14:42 2015] ath10k_pci 0000:06:00.0: no channel
configured; ignoring frame(s)!
[Fri Jul 24 11:19:57 2015] ath10k_pci 0000:06:00.0: no channel
configured; ignoring frame(s)!
[Fri Jul 24 11:21:00 2015] ath10k_pci 0000:06:00.0: no channel
configured; ignoring frame(s)!
[Fri Jul 24 11:21:00 2015] ath10k_pci 0000:06:00.0: no channel
configured; ignoring frame(s)!
[Fri Jul 24 11:34:54 2015] CPU: 2 PID: 14153 Comm: hexchat Tainted:
P           O    4.2.0-rc3-wl-ath-KVALO-ATH-MASTER+ #4
[Fri Jul 24 11:34:54 2015]  [<ffffffff8156b3ee>]
entry_SYSCALL_64_fastpath+0x12/0x71
[Fri Jul 24 11:37:50 2015] ath10k_pci 0000:06:00.0: no channel

configured; ignoring frame(s)!

Quoted 7 lines · Kalle Valo
Quoted 3 lines · Alexandre Maloteaux

0x003405ff, 168c:003e:1a56:1525 fallback) fw killer-n1525-fw api 4 htt-ver 3.0 wmi-op 4 htt-op 3 cal otp max-sta 32 features \xffffff80\xffffffd4\xffffffa8\xfffffff9\xffffff88\xffffffff\xffffffff

What's happening with the features string here? What might cause that?

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k