Qt5 and touchscreen calibration
Hello,
I got my touchscreen working perfectly with ts_test. Many thanks to Peter Seiderer !
But the thing is that my Qt5 app does not grab the touchscreen properly : x and y axis are switched. I did enable the tslib option under Qt5 in menuconfig. Is there some magic command line option to pass to the application ? I tried this :
$ myapp -platform linuxfb:fb=/dev/fb1 -plugin tslib ts_open() failed (No such file or directory)
Quoted 1 line
Quoted 1 line
Quoted 1 line
the app shows up, but TS still messed up.
My config :
- Raspberry Pi B+ and Adafruit 2.8" PiTFT w/ cap touch.
- Buildroot 2015.08.1
- Qt5 w/ tslib support enabled (BR2_PACKAGE_QT5BASE_TSLIB=y).
Regards,
David.
Quoted 6 lines · David Picard
Hello,
I got my touchscreen working perfectly with
ts_test. Many thanks to Peter Seiderer !
Quoted 6 lines
But the thing is that my Qt5 app does not grab the touchscreen properly : x and y axis are switched. I did enable the tslib option under Qt5 in menuconfig. Is there some magic command line option to pass to the application ? I tried this :
$ myapp -platform linuxfb:fb=/dev/fb1 -plugin tslib ts_open() failed (No such file or directory)
Did you export QT_QPA_EVDEV_TOUCHSCREEN_PARAMETERS=/dev/input/event0 (but
replace with the correct device of course)?
Or hang on, for tslib it's TSLIB_TSDEVICE that you have to set.
Regards,
Arnout
Quoted 18 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
the app shows up, but TS still messed up.
My config :
- Raspberry Pi B+ and Adafruit 2.8" PiTFT w/ cap touch.
- Buildroot 2015.08.1
- Qt5 w/ tslib support enabled (BR2_PACKAGE_QT5BASE_TSLIB=y).Regards,
David._______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
Hello David, Arnout,
Quoted 9 lines · Arnout Vandecappelle
Quoted 8 lines · David Picard
Hello,
I got my touchscreen working perfectly with
ts_test. Many thanks to Peter Seiderer !But the thing is that my Qt5 app does not grab the touchscreen properly : x and y axis are switched. I did enable the tslib option under Qt5 in menuconfig. Is
The following
$ QT_QPA_EVDEV_TOUCHSCREEN_PARAMETERS='rotate=270' /usr/lib/qt/examples/touch/fingerpaint/fingerpaint -platform linuxfb:fb=/dev/fb1
worked for me to get x/y right, see [1] for Qt5 parameters.
Regards,
Peter
[1] http://doc.qt.io/qt-5/embedded-linux.html
Quoted 34 lines
Quoted 4 lines
there some magic command line option to pass to the application ? I tried this :
$ myapp -platform linuxfb:fb=/dev/fb1 -plugin tslib ts_open() failed (No such file or directory)Did you export QT_QPA_EVDEV_TOUCHSCREEN_PARAMETERS=/dev/input/event0 (but
replace with the correct device of course)?Or hang on, for tslib it's
TSLIB_TSDEVICEthat you have to set.Regards,
ArnoutQuoted 18 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
the app shows up, but TS still messed up.
My config :
- Raspberry Pi B+ and Adafruit 2.8" PiTFT w/ cap touch.
- Buildroot 2015.08.1
- Qt5 w/ tslib support enabled (BR2_PACKAGE_QT5BASE_TSLIB=y).Regards,
David._______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Hello,
The 'rotate' trick did it.
Thanks,
David.
Le 30/10/2015 21:12, Peter Seiderer a ?crit :
Quoted 61 lines
Hello David, Arnout,
Quoted 9 lines · Arnout Vandecappelle
Quoted 8 lines · David Picard
Hello,
I got my touchscreen working perfectly with
ts_test. Many thanks to Peter Seiderer !But the thing is that my Qt5 app does not grab the touchscreen properly : x and y axis are switched. I did enable the tslib option under Qt5 in menuconfig. Is
The following
$ QT_QPA_EVDEV_TOUCHSCREEN_PARAMETERS='rotate=270' /usr/lib/qt/examples/touch/fingerpaint/fingerpaint -platform linuxfb:fb=/dev/fb1worked for me to get x/y right, see [1] for Qt5 parameters.
Regards,
Peter[1] http://doc.qt.io/qt-5/embedded-linux.html
Quoted 34 lines
Quoted 4 lines
there some magic command line option to pass to the application ? I tried this :
$ myapp -platform linuxfb:fb=/dev/fb1 -plugin tslib ts_open() failed (No such file or directory)Did you export QT_QPA_EVDEV_TOUCHSCREEN_PARAMETERS=/dev/input/event0 (but
replace with the correct device of course)?Or hang on, for tslib it's
TSLIB_TSDEVICEthat you have to set.Regards,
ArnoutQuoted 18 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
the app shows up, but TS still messed up.
My config :
- Raspberry Pi B+ and Adafruit 2.8" PiTFT w/ cap touch.
- Buildroot 2015.08.1
- Qt5 w/ tslib support enabled (BR2_PACKAGE_QT5BASE_TSLIB=y).Regards,
David._______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot