net: dsa: mv88e6060: use the correct bit shift for mac0

PATCH Superseded Neil Armstrong 1 participant 1 message Nov 10, 2015

Subsystems (3)

Networking Network drivers Networking DSA

lore

Share & tools

lore

Neil Armstrong

author

2015-11-10 13:25 UTC #0 lore raw

PATCH 4/6 net: dsa: mv88e6060: use the correct bit shift for mac0

According to the mv88e6060 datasheet, the first mac byte must be at position 9 instead of 8 since the bit 8 is used to select if the mac address must differ for each port for Pause frames. Use the correct shift and set the same mac address for all port.

Signed-off-by Neil Armstrong <[email protected]>

---
 drivers/net/dsa/mv88e6060.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

drivers/net/dsa/mv88e6060.c +2 -1

index 6a35e3f..449499d 100644
@@ -188,7 +188,8 @@ static int mv88e6060_setup(struct dsa_switch *ds)
 
 static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
 {
-	REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
+	/* Use the same MAC Address as FD Pause frames for all ports */
+	REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 9) | addr[1]);
 	REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
 	REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);

Signature · 1 line

1.9.1