Skip to contentSkip to conversation

net: dsa: mv88e6060: use the correct InitReady bit

PATCH In review Neil Armstrong 2 participants 2 messages Nov 10, 2015

Subsystems (3)
Networking Network drivers Networking DSA
lore
Share & tools
lore

Neil Armstrong

author
#0 lore raw

PATCH v2 2/6 net: dsa: mv88e6060: use the correct InitReady bit

According to the mv88e6060 datasheet, the InitReady bit position is 11 and the polarity is inverted.
Use the bit correctly to detect the end of initialization.

Acked-by Andrew Lunn <[email protected]>
Signed-off-by Neil Armstrong <[email protected]>
---
 drivers/net/dsa/mv88e6060.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/dsa/mv88e6060.c +1 -1
index 6885ef5..eff5e18 100644
@@ -102,7 +102,7 @@ static int mv88e6060_switch_reset(struct dsa_switch *ds)
 	timeout = jiffies + 1 * HZ;
 	while (time_before(jiffies, timeout)) {
 		ret = REG_READ(REG_GLOBAL, 0x00);
-		if ((ret & 0x8000) == 0x0000)
+		if (ret & 0x800)
 			break;
 
 		usleep_range(1000, 2000);
Signature · 1 line
1.9.1