ARM: dts: imxrt1050: allow this dtsi file to be compiled in Linux
Subsystems (2)
PATCH v3 16/19 ARM: dts: imxrt1050: allow this dtsi file to be compiled in Linux
Linux doesn't provide skeleton.dtsi file so let's remove its include and provide #address-cells/size-cells = <1> that were defined in skeleton.dtsi before.
--- arch/arm/dts/imxrt1050.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
arch/arm/dts/imxrt1050.dtsi +3 -1
@@ -4,7 +4,6 @@ * Author(s): Giulio Benetti <[email protected]> */ -#include "skeleton.dtsi" #include "armv7-m.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/imxrt1050-clock.h>
@@ -12,6 +11,9 @@ #include <dt-bindings/memory/imxrt-sdram.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { display0 = &lcdif; gpio0 = &gpio1;
Signature · 1 line
2.20.1
PATCH v3 17/19 arch: arm: dts: imxrt1050-evk: add lcdif node
Add lcdif node and its pinctrl.
--- arch/arm/dts/imxrt1050-evk.dts | 60 ++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+)
arch/arm/dts/imxrt1050-evk.dts +60 -0
@@ -185,6 +185,33 @@ 0x17061 >; }; + + pinctrl_lcdif: lcdifgrp { + u-boot,dm-spl; + fsl,pins = < + MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15 0x1b0b1 + MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31 0x0b069 + MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02 0x0b069 + >; + }; }; };
@@ -198,3 +225,36 @@ cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; }; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + display = <&display0>; + status = "okay"; + + assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>; + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>; + + display0: display0 { + bits-per-pixel = <16>; + bus-width = <16>; + + display-timings { + timing0: timing0 { + clock-frequency = <9300000>; + hactive = <480>; + vactive = <272>; + hback-porch = <4>; + hfront-porch = <8>; + vback-porch = <4>; + vfront-porch = <8>; + hsync-len = <41>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <0>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + }; +};
Signature · 1 line
2.20.1
PATCH v3 17/19 arch: arm: dts: imxrt1050-evk: add lcdif node
Quoted 3 lines · On Wed, 8 Apr 2020 17:11:06 +0200 Giulio Benetti giulio.benetti at…
Add lcdif node and its pinctrl.
Signed-off-by Giulio Benetti <[email protected]>
--
Anatolij
PATCH v3 17/19 arch: arm: dts: imxrt1050-evk: add lcdif node
In reply to Giulio BenettiQuoted 3 lines
Add lcdif node and its pinctrl.
Signed-off-by Giulio Benetti <[email protected]>Reviewed-by Anatolij Gustschin <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v3 18/19 configs: imxrt1050-evk: enable video support/console
In reply to Giulio BenettiEnable DM_VIDEO subsystem and its BACKLIGHT_GPIO. Then enable SYS_WHITE_ON_BLACK to have classic black background on display. Need also to enable CONFIG_SYS_CONSOLE_ENV_OVERWRITE to retrieve stdin/stdout/stderr from CONFIG_EXTRA_ENV_SETTINGS.
--- configs/imxrt1050-evk_defconfig | 4 ++++ 1 file changed, 4 insertions(+)
configs/imxrt1050-evk_defconfig +4 -0
@@ -17,6 +17,7 @@ CONFIG_SPL_TEXT_BASE=0x20209000 CONFIG_DISTRO_DEFAULTS=y CONFIG_SD_BOOT=y # CONFIG_USE_BOOTCOMMAND is not set +CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
@@ -62,6 +63,9 @@ CONFIG_IMXRT_SDRAM=y CONFIG_FSL_LPUART=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y +CONFIG_DM_VIDEO=y +CONFIG_BACKLIGHT_GPIO=y +CONFIG_SYS_WHITE_ON_BLACK=y CONFIG_SHA1=y CONFIG_SHA256=y CONFIG_HEXDUMP=y
Signature · 1 line
2.20.1
PATCH v3 18/19 configs: imxrt1050-evk: enable video support/console
Quoted 6 lines · On Wed, 8 Apr 2020 17:11:07 +0200 Giulio Benetti giulio.benetti at…
Enable
DM_VIDEOsubsystem and itsBACKLIGHT_GPIO. Then enableSYS_WHITE_ON_BLACKto have classic black background on display. Need also to enableCONFIG_SYS_CONSOLE_ENV_OVERWRITEto retrieve stdin/stdout/stderr fromCONFIG_EXTRA_ENV_SETTINGS.Signed-off-by Giulio Benetti <[email protected]>
--
Anatolij
PATCH v3 18/19 configs: imxrt1050-evk: enable video support/console
In reply to Giulio BenettiQuoted 6 lines
Enable
DM_VIDEOsubsystem and itsBACKLIGHT_GPIO. Then enableSYS_WHITE_ON_BLACKto have classic black background on display. Need also to enableCONFIG_SYS_CONSOLE_ENV_OVERWRITEto retrieve stdin/stdout/stderr fromCONFIG_EXTRA_ENV_SETTINGS.Signed-off-by Giulio Benetti <[email protected]>Reviewed-by Anatolij Gustschin <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v3 19/19 configs: imxrt1050-evk: temporary disable DCACHE
In reply to Giulio Benettimxsfb needs a dcache function not implemented in cortex-M7, so for the moment let's keep dcache not enabled.
--- configs/imxrt1050-evk_defconfig | 2 ++ 1 file changed, 2 insertions(+)
configs/imxrt1050-evk_defconfig +2 -0
@@ -1,4 +1,6 @@ CONFIG_ARM=y +CONFIG_SYS_DCACHE_OFF=y +# CONFIG_SPL_SYS_DCACHE_OFF is not set CONFIG_ARCH_IMXRT=y CONFIG_SYS_TEXT_BASE=0x80002000 CONFIG_SPL_GPIO_SUPPORT=y
Signature · 1 line
2.20.1
PATCH v3 19/19 configs: imxrt1050-evk: temporary disable DCACHE
Quoted 4 lines · On Wed, 8 Apr 2020 17:11:08 +0200 Giulio Benetti giulio.benetti at…
mxsfb needs a dcache function not implemented in cortex-M7, so for the moment let's keep dcache not enabled.
Signed-off-by Giulio Benetti <[email protected]>
--
Anatolij
PATCH v3 19/19 configs: imxrt1050-evk: temporary disable DCACHE
Thank you Anatolij
Signature · 2 lines
Giulio Benetti Benetti Engineering sas
Quoted 13 lines · Anatolij Gustschin
Quoted 4 lines · On Wed, 8 Apr 2020 17:11:08 +0200 Giulio Benetti giulio.benetti at…
mxsfb needs a dcache function not implemented in cortex-M7, so for the moment let's keep dcache not enabled.
Signed-off-by Giulio Benetti <[email protected]>Reviewed-by Anatolij Gustschin <[email protected]>--
Anatolij
PATCH v3 19/19 configs: imxrt1050-evk: temporary disable DCACHE
In reply to Giulio BenettiQuoted 4 lines
mxsfb needs a dcache function not implemented in cortex-M7, so for the moment let's keep dcache not enabled.
Signed-off-by Giulio Benetti <[email protected]>Reviewed-by Anatolij Gustschin <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v3 16/19 ARM: dts: imxrt1050: allow this dtsi file to be compiled in Linux
In reply to Giulio BenettiQuoted 5 lines · On Wed, 8 Apr 2020 17:11:05 +0200 Giulio Benetti giulio.benetti at…
Linux doesn't provide
skeleton.dtsifile so let's remove its include and provide #address-cells/size-cells = <1> that were defined inskeleton.dtsibefore.Signed-off-by Giulio Benetti <[email protected]>
--
Anatolij
PATCH v3 16/19 ARM: dts: imxrt1050: allow this dtsi file to be compiled in Linux
In reply to Giulio BenettiQuoted 5 lines
Linux doesn't provide
skeleton.dtsifile so let's remove its include and provide #address-cells/size-cells = <1> that were defined inskeleton.dtsibefore.Signed-off-by Giulio Benetti <[email protected]>Reviewed-by Anatolij Gustschin <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================