Skip to contentSkip to conversation

4.19.59-stable review

PATCH In review Greg Kroah-Hartman 8 participants 99 messages Jul 12, 2019 – Jul 14, 2019

Subsystems (2)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.19.59-stable review

This is the start of the stable review cycle for the 4.19.59 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.59-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.19.59-rc1

Arnd Bergmann <[email protected]>
staging: rtl8712: reduce stack usage, again

Dave Stevenson <[email protected]>
staging: bcm2835-camera: Handle empty EOS buffers whilst streaming

Dave Stevenson <[email protected]>
staging: bcm2835-camera: Remove check of the number of buffers supplied

Dave Stevenson <[email protected]>
staging: bcm2835-camera: Ensure all buffers are returned on disable

Dave Stevenson <[email protected]>
staging: bcm2835-camera: Replace spinlock protecting context_map with mutex

Colin Ian King <[email protected]>
staging: fsl-dpaa2/ethsw: fix memory leak of switchdev_work

Sean Young <[email protected]>
MIPS: Remove superfluous check for __linux__

Vishnu DASA <[email protected]>
VMCI: Fix integer overflow in VMCI handle arrays

Christian Lamparter <[email protected]>
carl9170: fix misuse of device driver API

Todd Kjos <[email protected]>
binder: fix memory leak in error path

Nick Desaulniers <[email protected]>
lkdtm: support llvm-objcopy

Sebastian Parschauer <[email protected]>
HID: Add another Primax PIXART OEM mouse quirk

Ian Abbott <[email protected]>
staging: comedi: amplc_pci230: fix null pointer deref on interrupt

Ian Abbott <[email protected]>
staging: comedi: dt282x: fix a null pointer deref on interrupt

Nikolaus Voss <[email protected]>
drivers/usb/typec/tps6598x.c: fix 4CC cmd write

Nikolaus Voss <[email protected]>
drivers/usb/typec/tps6598x.c: fix portinfo width

Yoshihiro Shimoda <[email protected]>
usb: renesas_usbhs: add a workaround for a race condition of workqueue

Martin Blumenstingl <[email protected]>
usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset()

Kiruthika Varadarajan <[email protected]>
usb: gadget: ether: Fix race between gether_disconnect and rx_submit

Alan Stern <[email protected]>
p54usb: Fix race between disconnect and firmware loading

Oliver Barta <[email protected]>
Revert "serial: 8250: Don't service RX FIFO if interrupts are disabled"

Jörgen Storvist <[email protected]>
USB: serial: option: add support for GosunCn ME3630 RNDIS mode

Andreas Fritiofson <[email protected]>
USB: serial: ftdi_sio: add ID for isodebug v1

Brian Norris <[email protected]>
mwifiex: Don't abort on small, spec-compliant vendor IEs

Takashi Iwai <[email protected]>
mwifiex: Abort at too short BSS descriptor element

Andy Lutomirski <[email protected]>
Documentation/admin: Remove the vsyscall=native documentation

Tim Chen <[email protected]>
Documentation: Add section about CPU vulnerabilities for Spectre

Dianzhang Chen <[email protected]>
x86/tls: Fix possible spectre-v1 in do_get_thread_area()

Dianzhang Chen <[email protected]>
x86/ptrace: Fix possible spectre-v1 in ptrace_get_debugreg()

John Garry <[email protected]>
perf pmu: Fix uncore PMU alias list for ARM64

Douglas Anderson <[email protected]>
block, bfq: NULL out the bic when it's no longer valid

Kailang Yang <[email protected]>
ALSA: hda/realtek - Headphone Mic can't record after S3

Takashi Iwai <[email protected]>
ALSA: usb-audio: Fix parse of UAC2 Extension Units

Mauro Carvalho Chehab <[email protected]>
media: stv0297: fix frequency range limit

Steven J. Magnani <[email protected]>
udf: Fix incorrect final NOT_ALLOCATED (hole) extent length

Hongjie Fang <[email protected]>
fscrypt: don't set policy for a dead directory

Lin Yi <[email protected]>
net :sunrpc :clnt :Fix xps refcount imbalance on the error path

Benjamin Coddington <[email protected]>
NFS4: Only set creation opendata if O_CREAT

Rasmus Villemoes <[email protected]>
net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()

yangerkun <[email protected]>
quota: fix a problem about transfer quota

Nilesh Javali <[email protected]>
scsi: qedi: Check targetname while finding boot target information

Colin Ian King <[email protected]>
net: lio_core: fix potential sign-extension overflow on large shift

Xin Long <[email protected]>
ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL

Dan Carpenter <[email protected]>
drm: return -EFAULT if copy_to_user() fails

Mauro S. M. Rodrigues <[email protected]>
bnx2x: Check if transceiver implements DDM before access

Mariusz Tkaczyk <[email protected]>
md: fix for divide error in status_resync

Wolfram Sang <[email protected]>
mmc: core: complete HS400 before checking status

Reinhard Speyerer <[email protected]>
qmi_wwan: extend permitted QMAP mux_id value range

Reinhard Speyerer <[email protected]>
qmi_wwan: avoid RCU stalls on device disconnect when in QMAP mode

Reinhard Speyerer <[email protected]>
qmi_wwan: add support for QMAP padding in the RX path

Alexei Starovoitov <[email protected]>
bpf, x64: fix stack layout of JITed bpf code

Toshiaki Makita <[email protected]>
bpf, devmap: Add missing RCU read lock on flush

Toshiaki Makita <[email protected]>
bpf, devmap: Add missing bulk queue free

Toshiaki Makita <[email protected]>
bpf, devmap: Fix premature entry free on destroying map

Naftali Goldstein <[email protected]>
mac80211: do not start any work during reconfigure flow

Yibo Zhao <[email protected]>
mac80211: only warn once on chanctx_conf being NULL

Bartosz Golaszewski <[email protected]>
ARM: davinci: da8xx: specify dma_coherent_mask for lcdc

Bartosz Golaszewski <[email protected]>
ARM: davinci: da850-evm: call regulator_has_full_constraints()

Ido Schimmel <[email protected]>
mlxsw: spectrum: Disallow prio-tagged packets when PVID is removed

Dave Martin <[email protected]>
KVM: arm/arm64: vgic: Fix kvm_device leak in vgic_its_destroy

Anson Huang <[email protected]>
Input: imx_keypad - make sure keyboard can always wake up system

Nick Hu <[email protected]>
riscv: Fix udelay in RV32.

Qian Cai <[email protected]>
drm/vmwgfx: fix a warning due to missing dma_parms

Thomas Hellstrom <[email protected]>
drm/vmwgfx: Honor the sg list segment size limitation

Heiko Carstens <[email protected]>
s390/boot: disable address-of-packed-member warning

Teresa Remmet <[email protected]>
ARM: dts: am335x phytec boards: Fix cd-gpios active level

Thomas Falcon <[email protected]>
ibmvnic: Fix unchecked return codes of memory allocations

Thomas Falcon <[email protected]>
ibmvnic: Refresh device multicast list after reset

Thomas Falcon <[email protected]>
ibmvnic: Do not close unopened driver during reset

Michael Schmitz <[email protected]>
net: phy: rename Asix Electronics PHY driver

YueHaibing <[email protected]>
can: af_can: Fix error path of can_init()

Eugen Hristev <[email protected]>
can: m_can: implement errata "Needless activation of MRAF irq"

Sean Nyekjaer <[email protected]>

    can: mcp251x: add support for mcp25625

Sean Nyekjaer <[email protected]>

    dt-bindings: can: mcp251x: add mcp25625 support

Srinivas Kandagatla <[email protected]>
soundwire: intel: set dai min and max channels correctly

Takashi Iwai <[email protected]>
mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies()

Jia-Ju Bai <[email protected]>
iwlwifi: Fix double-free problems in iwl_req_fw_callback()

Takashi Iwai <[email protected]>
mwifiex: Fix possible buffer overflows at parsing bss descriptor

Pradeep Kumar Chitrapu <[email protected]>
mac80211: free peer keys before vif down in mesh

Thomas Pedersen <[email protected]>
mac80211: mesh: fix RCU warning

Melissa Wen <[email protected]>
staging:iio:ad7150: fix threshold mode config bit

Srinivas Kandagatla <[email protected]>
soundwire: stream: fix out of boundary access on port properties

John Fastabend <[email protected]>
bpf: sockmap, fix use after free from sleep in psock backlog workqueue

John Crispin <[email protected]>
mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he()

Matteo Croce <[email protected]>
samples, bpf: suppress compiler warning

Chang-Hsien Tsai <[email protected]>
samples, bpf: fix to change the buffer size for read()

Aaron Ma <[email protected]>
Input: elantech - enable middle button support on 2 ThinkPads

Florian Fainelli <[email protected]>
soc: bcm: brcmstb: biuctrl: Register writes require a barrier

Florian Fainelli <[email protected]>
soc: brcmstb: Fix error path for unsupported CPUs

Christophe Leroy <[email protected]>
crypto: talitos - rename alternative AEAD algos.

Christophe Leroy <[email protected]>
crypto: talitos - fix hash on SEC1.

-------------

Diffstat:

 Documentation/ABI/testing/sysfs-class-net-qmi      |   4 +-
 Documentation/admin-guide/hw-vuln/index.rst        |   1 +
 Documentation/admin-guide/hw-vuln/spectre.rst      | 697 +++++++++++++++++++++
 Documentation/admin-guide/kernel-parameters.txt    |   6 -
 .../bindings/net/can/microchip,mcp251x.txt         |   1 +
 Documentation/userspace-api/spec_ctrl.rst          |   2 +
 Makefile                                           |   4 +-
 arch/arm/boot/dts/am335x-pcm-953.dtsi              |   2 +-
 arch/arm/boot/dts/am335x-wega.dtsi                 |   2 +-
 arch/arm/mach-davinci/board-da850-evm.c            |   2 +
 arch/arm/mach-davinci/devices-da8xx.c              |   3 +
 arch/mips/include/uapi/asm/sgidefs.h               |   8 -
 arch/riscv/lib/delay.c                             |   2 +-
 arch/s390/Makefile                                 |   1 +
 arch/x86/kernel/ptrace.c                           |   5 +-
 arch/x86/kernel/tls.c                              |   9 +-
 arch/x86/net/bpf_jit_comp.c                        |  74 +--
 block/bfq-iosched.c                                |   1 +
 drivers/android/binder.c                           |   4 +-
 drivers/crypto/talitos.c                           |  85 +--
 drivers/gpu/drm/drm_bufs.c                         |   5 +-
 drivers/gpu/drm/drm_ioc32.c                        |   5 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c                |   3 +
 drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c         |  10 +-
 drivers/hid/hid-ids.h                              |   1 +
 drivers/hid/hid-quirks.c                           |   1 +
 drivers/input/keyboard/imx_keypad.c                |  18 +-
 drivers/input/mouse/elantech.c                     |   2 +
 drivers/md/md.c                                    |  36 +-
 drivers/media/dvb-frontends/stv0297.c              |   2 +-
 drivers/misc/lkdtm/Makefile                        |   3 +-
 drivers/misc/vmw_vmci/vmci_context.c               |  80 +--
 drivers/misc/vmw_vmci/vmci_handle_array.c          |  38 +-
 drivers/misc/vmw_vmci/vmci_handle_array.h          |  29 +-
 drivers/mmc/core/mmc.c                             |   6 +-
 drivers/net/can/m_can/m_can.c                      |  21 +
 drivers/net/can/spi/Kconfig                        |   5 +-
 drivers/net/can/spi/mcp251x.c                      |  25 +-
 drivers/net/dsa/mv88e6xxx/global1_vtu.c            |   2 +-
 drivers/net/ethernet/8390/Kconfig                  |   2 +-
 .../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c    |   3 +-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h   |   1 +
 drivers/net/ethernet/cavium/liquidio/lio_core.c    |   2 +-
 drivers/net/ethernet/ibm/ibmvnic.c                 |  19 +-
 drivers/net/ethernet/mellanox/mlxsw/reg.h          |   2 +-
 drivers/net/phy/Kconfig                            |   2 +-
 drivers/net/phy/Makefile                           |   2 +-
 drivers/net/phy/{asix.c => ax88796b.c}             |   0
 drivers/net/usb/qmi_wwan.c                         |  27 +-
 drivers/net/wireless/ath/carl9170/usb.c            |  39 +-
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c       |   1 -
 drivers/net/wireless/intersil/p54/p54usb.c         |  43 +-
 drivers/net/wireless/marvell/mwifiex/fw.h          |  12 +-
 drivers/net/wireless/marvell/mwifiex/ie.c          |  47 +-
 drivers/net/wireless/marvell/mwifiex/scan.c        |  31 +-
 drivers/net/wireless/marvell/mwifiex/sta_ioctl.c   |   4 +-
 drivers/net/wireless/marvell/mwifiex/wmm.c         |   2 +-
 drivers/scsi/qedi/qedi_main.c                      |   3 +
 drivers/soc/bcm/brcmstb/biuctrl.c                  |   6 +-
 drivers/soundwire/intel.c                          |   4 +-
 drivers/soundwire/stream.c                         |   4 +-
 drivers/staging/comedi/drivers/amplc_pci230.c      |   3 +-
 drivers/staging/comedi/drivers/dt282x.c            |   3 +-
 drivers/staging/fsl-dpaa2/ethsw/ethsw.c            |   1 +
 drivers/staging/iio/cdc/ad7150.c                   |  19 +-
 drivers/staging/rtl8712/rtl871x_ioctl_linux.c      | 157 +++--
 .../vc04_services/bcm2835-camera/bcm2835-camera.c  |  43 +-
 .../vc04_services/bcm2835-camera/mmal-vchiq.c      |  32 +-
 .../vc04_services/bcm2835-camera/mmal-vchiq.h      |   3 +
 drivers/tty/serial/8250/8250_port.c                |   3 +-
 drivers/usb/dwc2/core.c                            |   2 +-
 drivers/usb/gadget/function/u_ether.c              |   6 +-
 drivers/usb/renesas_usbhs/fifo.c                   |  34 +-
 drivers/usb/serial/ftdi_sio.c                      |   1 +
 drivers/usb/serial/ftdi_sio_ids.h                  |   6 +
 drivers/usb/serial/option.c                        |   1 +
 drivers/usb/typec/tps6598x.c                       |   6 +-
 fs/crypto/policy.c                                 |   2 +
 fs/nfs/nfs4proc.c                                  |  20 +-
 fs/quota/dquot.c                                   |   4 +-
 fs/udf/inode.c                                     |  93 ++-
 include/linux/vmw_vmci_defs.h                      |  11 +-
 include/net/ip6_tunnel.h                           |   9 +-
 include/uapi/linux/usb/audio.h                     |  37 ++
 kernel/bpf/devmap.c                                |   9 +-
 net/can/af_can.c                                   |  24 +-
 net/core/skbuff.c                                  |   1 +
 net/mac80211/ieee80211_i.h                         |   9 +-
 net/mac80211/mesh.c                                |   6 +-
 net/mac80211/util.c                                |   4 +
 net/sunrpc/clnt.c                                  |   1 +
 net/wireless/util.c                                |   2 +-
 samples/bpf/bpf_load.c                             |   2 +-
 samples/bpf/task_fd_query_user.c                   |   2 +-
 sound/pci/hda/patch_realtek.c                      |   2 +-
 sound/usb/mixer.c                                  |  16 +-
 tools/perf/util/pmu.c                              |  28 +-
 virt/kvm/arm/vgic/vgic-its.c                       |   1 +
 98 files changed, 1532 insertions(+), 532 deletions(-)
author maintainer
#1 lore raw

PATCH 1/91 crypto: talitos - fix hash on SEC1.

From: Christophe Leroy <[email protected]>

commit 58cdbc6d2263beb36954408522762bbe73169306 upstream.

On SEC1, hash provides wrong result when performing hashing in several steps with input data SG list has more than one element. This was detected with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS:

[   44.185947] alg: hash: md5-talitos test failed (wrong result) on test vector 6, cfg="random: may_sleep use_finup src_divs=[<reimport>25.88%@+8063, <flush>24.19%@+9588, 28.63%@+16333, <reimport>4.60%@+6756, 16.70%@+16281] dst_divs=[71.61%@alignmask+16361, 14.36%@+7756, 14.3%@+"
[   44.325122] alg: hash: sha1-talitos test failed (wrong result) on test vector 3, cfg="random: inplace use_final src_divs=[<flush,nosimd>16.56%@+16378, <reimport>52.0%@+16329, 21.42%@alignmask+16380, 10.2%@alignmask+16380] iv_offset=39"
[   44.493500] alg: hash: sha224-talitos test failed (wrong result) on test vector 4, cfg="random: use_final nosimd src_divs=[<reimport>52.27%@+7401, <reimport>17.34%@+16285, <flush>17.71%@+26, 12.68%@+10644] iv_offset=43"
[   44.673262] alg: hash: sha256-talitos test failed (wrong result) on test vector 4, cfg="random: may_sleep use_finup src_divs=[<reimport>60.6%@+12790, 17.86%@+1329, <reimport>12.64%@alignmask+16300, 8.29%@+15, 0.40%@+13506, <reimport>0.51%@+16322, <reimport>0.24%@+16339] dst_divs"

This is due to two issues:
- We have an overlap between the buffer used for copying the input data (SEC1 doesn't do scatter/gather) and the chained descriptor.
- Data copy is wrong when the previous hash left less than one blocksize of data to hash, implying a complement of the previous block with a few bytes from the new request.

Fix it by:
- Moving the second descriptor after the buffer, as moving the buffer after the descriptor would make it more complex for other cipher operations (AEAD, ABLKCIPHER)
- Skip the bytes taken from the new request to complete the previous one by moving the SG list forward.

Fixes 37b5e8897eb5 ("crypto: talitos - chain in buffered data for ahash on SEC1")
---
 drivers/crypto/talitos.c |   69 +++++++++++++++++++++++++++--------------------
 1 file changed, 41 insertions(+), 28 deletions(-)
drivers/crypto/talitos.c +41 -28
@@ -334,6 +334,21 @@ int talitos_submit(struct device *dev, i
 }
 EXPORT_SYMBOL(talitos_submit);
 
+static __be32 get_request_hdr(struct talitos_request *request, bool is_sec1)
+{
+	struct talitos_edesc *edesc;
+
+	if (!is_sec1)
+		return request->desc->hdr;
+
+	if (!request->desc->next_desc)
+		return request->desc->hdr1;
+
+	edesc = container_of(request->desc, struct talitos_edesc, desc);
+
+	return ((struct talitos_desc *)(edesc->buf + edesc->dma_len))->hdr1;
+}
+
 /*
  * process what was done, notify callback of error if not
  */
@@ -355,12 +370,7 @@ static void flush_channel(struct device
 
 		/* descriptors with their done bits set don't get the error */
 		rmb();
-		if (!is_sec1)
-			hdr = request->desc->hdr;
-		else if (request->desc->next_desc)
-			hdr = (request->desc + 1)->hdr1;
-		else
-			hdr = request->desc->hdr1;
+		hdr = get_request_hdr(request, is_sec1);
 
 		if ((hdr & DESC_HDR_DONE) == DESC_HDR_DONE)
 			status = 0;
@@ -490,8 +500,14 @@ static u32 current_desc_hdr(struct devic
 		}
 	}
 
-	if (priv->chan[ch].fifo[iter].desc->next_desc == cur_desc)
-		return (priv->chan[ch].fifo[iter].desc + 1)->hdr;
+	if (priv->chan[ch].fifo[iter].desc->next_desc == cur_desc) {
+		struct talitos_edesc *edesc;
+
+		edesc = container_of(priv->chan[ch].fifo[iter].desc,
+				     struct talitos_edesc, desc);
+		return ((struct talitos_desc *)
+			(edesc->buf + edesc->dma_len))->hdr;
+	}
 
 	return priv->chan[ch].fifo[iter].desc->hdr;
 }
@@ -1431,15 +1447,11 @@ static struct talitos_edesc *talitos_ede
 	edesc->dst_nents = dst_nents;
 	edesc->iv_dma = iv_dma;
 	edesc->dma_len = dma_len;
-	if (dma_len) {
-		void *addr = &edesc->link_tbl[0];
-
-		if (is_sec1 && !dst)
-			addr += sizeof(struct talitos_desc);
-		edesc->dma_link_tbl = dma_map_single(dev, addr,
+	if (dma_len)
+		edesc->dma_link_tbl = dma_map_single(dev, &edesc->link_tbl[0],
 						     edesc->dma_len,
 						     DMA_BIDIRECTIONAL);
-	}
+
 	return edesc;
 }
 
@@ -1706,14 +1718,16 @@ static void common_nonsnoop_hash_unmap(s
 	struct talitos_private *priv = dev_get_drvdata(dev);
 	bool is_sec1 = has_ftr_sec1(priv);
 	struct talitos_desc *desc = &edesc->desc;
-	struct talitos_desc *desc2 = desc + 1;
+	struct talitos_desc *desc2 = (struct talitos_desc *)
+				     (edesc->buf + edesc->dma_len);
 
 	unmap_single_talitos_ptr(dev, &edesc->desc.ptr[5], DMA_FROM_DEVICE);
 	if (desc->next_desc &&
 	    desc->ptr[5].ptr != desc2->ptr[5].ptr)
 		unmap_single_talitos_ptr(dev, &desc2->ptr[5], DMA_FROM_DEVICE);
 
-	talitos_sg_unmap(dev, edesc, req_ctx->psrc, NULL, 0, 0);
+	if (req_ctx->psrc)
+		talitos_sg_unmap(dev, edesc, req_ctx->psrc, NULL, 0, 0);
 
 	/* When using hashctx-in, must unmap it. */
 	if (from_talitos_ptr_len(&edesc->desc.ptr[1], is_sec1))
@@ -1780,7 +1794,6 @@ static void talitos_handle_buggy_hash(st
 
 static int common_nonsnoop_hash(struct talitos_edesc *edesc,
 				struct ahash_request *areq, unsigned int length,
-				unsigned int offset,
 				void (*callback) (struct device *dev,
 						  struct talitos_desc *desc,
 						  void *context, int error))
@@ -1819,9 +1832,7 @@ static int common_nonsnoop_hash(struct t
 
 	sg_count = edesc->src_nents ?: 1;
 	if (is_sec1 && sg_count > 1)
-		sg_pcopy_to_buffer(req_ctx->psrc, sg_count,
-				   edesc->buf + sizeof(struct talitos_desc),
-				   length, req_ctx->nbuf);
+		sg_copy_to_buffer(req_ctx->psrc, sg_count, edesc->buf, length);
 	else if (length)
 		sg_count = dma_map_sg(dev, req_ctx->psrc, sg_count,
 				      DMA_TO_DEVICE);
@@ -1834,7 +1845,7 @@ static int common_nonsnoop_hash(struct t
 				       DMA_TO_DEVICE);
 	} else {
 		sg_count = talitos_sg_map(dev, req_ctx->psrc, length, edesc,
-					  &desc->ptr[3], sg_count, offset, 0);
+					  &desc->ptr[3], sg_count, 0, 0);
 		if (sg_count > 1)
 			sync_needed = true;
 	}
@@ -1858,7 +1869,8 @@ static int common_nonsnoop_hash(struct t
 		talitos_handle_buggy_hash(ctx, edesc, &desc->ptr[3]);
 
 	if (is_sec1 && req_ctx->nbuf && length) {
-		struct talitos_desc *desc2 = desc + 1;
+		struct talitos_desc *desc2 = (struct talitos_desc *)
+					     (edesc->buf + edesc->dma_len);
 		dma_addr_t next_desc;
 
 		memset(desc2, 0, sizeof(*desc2));
@@ -1879,7 +1891,7 @@ static int common_nonsnoop_hash(struct t
 						      DMA_TO_DEVICE);
 		copy_talitos_ptr(&desc2->ptr[2], &desc->ptr[2], is_sec1);
 		sg_count = talitos_sg_map(dev, req_ctx->psrc, length, edesc,
-					  &desc2->ptr[3], sg_count, offset, 0);
+					  &desc2->ptr[3], sg_count, 0, 0);
 		if (sg_count > 1)
 			sync_needed = true;
 		copy_talitos_ptr(&desc2->ptr[5], &desc->ptr[5], is_sec1);
@@ -1990,7 +2002,6 @@ static int ahash_process_req(struct ahas
 	struct device *dev = ctx->dev;
 	struct talitos_private *priv = dev_get_drvdata(dev);
 	bool is_sec1 = has_ftr_sec1(priv);
-	int offset = 0;
 	u8 *ctx_buf = req_ctx->buf[req_ctx->buf_idx];
 
 	if (!req_ctx->last && (nbytes + req_ctx->nbuf <= blocksize)) {
@@ -2030,6 +2041,8 @@ static int ahash_process_req(struct ahas
 			sg_chain(req_ctx->bufsl, 2, areq->src);
 		req_ctx->psrc = req_ctx->bufsl;
 	} else if (is_sec1 && req_ctx->nbuf && req_ctx->nbuf < blocksize) {
+		int offset;
+
 		if (nbytes_to_hash > blocksize)
 			offset = blocksize - req_ctx->nbuf;
 		else
@@ -2042,7 +2055,8 @@ static int ahash_process_req(struct ahas
 		sg_copy_to_buffer(areq->src, nents,
 				  ctx_buf + req_ctx->nbuf, offset);
 		req_ctx->nbuf += offset;
-		req_ctx->psrc = areq->src;
+		req_ctx->psrc = scatterwalk_ffwd(req_ctx->bufsl, areq->src,
+						 offset);
 	} else
 		req_ctx->psrc = areq->src;
 
@@ -2082,8 +2096,7 @@ static int ahash_process_req(struct ahas
 	if (ctx->keylen && (req_ctx->first || req_ctx->last))
 		edesc->desc.hdr |= DESC_HDR_MODE0_MDEU_HMAC;
 
-	return common_nonsnoop_hash(edesc, areq, nbytes_to_hash, offset,
-				    ahash_done);
+	return common_nonsnoop_hash(edesc, areq, nbytes_to_hash, ahash_done);
 }
 
 static int ahash_update(struct ahash_request *areq)
author maintainer
#2 lore raw

PATCH 2/91 crypto: talitos - rename alternative AEAD algos.

In reply to Greg Kroah-Hartman

From: Christophe Leroy <[email protected]>

commit a1a42f84011fae6ff08441a91aefeb7febc984fc upstream.

The talitos driver has two ways to perform AEAD depending on the HW capability. Some HW support both. It is needed to give them different names to distingish which one it is for instance when a test fails.

Fixes 7405c8d7ff97 ("crypto: talitos - templates for AEAD using HMAC_SNOOP_NO_AFEU")
---
 drivers/crypto/talitos.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/crypto/talitos.c +8 -8
@@ -2299,7 +2299,7 @@ static struct talitos_alg_template drive
 			.base = {
 				.cra_name = "authenc(hmac(sha1),cbc(aes))",
 				.cra_driver_name = "authenc-hmac-sha1-"
-						   "cbc-aes-talitos",
+						   "cbc-aes-talitos-hsna",
 				.cra_blocksize = AES_BLOCK_SIZE,
 				.cra_flags = CRYPTO_ALG_ASYNC,
 			},
@@ -2343,7 +2343,7 @@ static struct talitos_alg_template drive
 				.cra_name = "authenc(hmac(sha1),"
 					    "cbc(des3_ede))",
 				.cra_driver_name = "authenc-hmac-sha1-"
-						   "cbc-3des-talitos",
+						   "cbc-3des-talitos-hsna",
 				.cra_blocksize = DES3_EDE_BLOCK_SIZE,
 				.cra_flags = CRYPTO_ALG_ASYNC,
 			},
@@ -2385,7 +2385,7 @@ static struct talitos_alg_template drive
 			.base = {
 				.cra_name = "authenc(hmac(sha224),cbc(aes))",
 				.cra_driver_name = "authenc-hmac-sha224-"
-						   "cbc-aes-talitos",
+						   "cbc-aes-talitos-hsna",
 				.cra_blocksize = AES_BLOCK_SIZE,
 				.cra_flags = CRYPTO_ALG_ASYNC,
 			},
@@ -2429,7 +2429,7 @@ static struct talitos_alg_template drive
 				.cra_name = "authenc(hmac(sha224),"
 					    "cbc(des3_ede))",
 				.cra_driver_name = "authenc-hmac-sha224-"
-						   "cbc-3des-talitos",
+						   "cbc-3des-talitos-hsna",
 				.cra_blocksize = DES3_EDE_BLOCK_SIZE,
 				.cra_flags = CRYPTO_ALG_ASYNC,
 			},
@@ -2471,7 +2471,7 @@ static struct talitos_alg_template drive
 			.base = {
 				.cra_name = "authenc(hmac(sha256),cbc(aes))",
 				.cra_driver_name = "authenc-hmac-sha256-"
-						   "cbc-aes-talitos",
+						   "cbc-aes-talitos-hsna",
 				.cra_blocksize = AES_BLOCK_SIZE,
 				.cra_flags = CRYPTO_ALG_ASYNC,
 			},
@@ -2515,7 +2515,7 @@ static struct talitos_alg_template drive
 				.cra_name = "authenc(hmac(sha256),"
 					    "cbc(des3_ede))",
 				.cra_driver_name = "authenc-hmac-sha256-"
-						   "cbc-3des-talitos",
+						   "cbc-3des-talitos-hsna",
 				.cra_blocksize = DES3_EDE_BLOCK_SIZE,
 				.cra_flags = CRYPTO_ALG_ASYNC,
 			},
@@ -2641,7 +2641,7 @@ static struct talitos_alg_template drive
 			.base = {
 				.cra_name = "authenc(hmac(md5),cbc(aes))",
 				.cra_driver_name = "authenc-hmac-md5-"
-						   "cbc-aes-talitos",
+						   "cbc-aes-talitos-hsna",
 				.cra_blocksize = AES_BLOCK_SIZE,
 				.cra_flags = CRYPTO_ALG_ASYNC,
 			},
@@ -2683,7 +2683,7 @@ static struct talitos_alg_template drive
 			.base = {
 				.cra_name = "authenc(hmac(md5),cbc(des3_ede))",
 				.cra_driver_name = "authenc-hmac-md5-"
-						   "cbc-3des-talitos",
+						   "cbc-3des-talitos-hsna",
 				.cra_blocksize = DES3_EDE_BLOCK_SIZE,
 				.cra_flags = CRYPTO_ALG_ASYNC,
 			},
author maintainer
#3 lore raw

PATCH 3/91 soc: brcmstb: Fix error path for unsupported CPUs

In reply to Greg Kroah-Hartman

[ Upstream commit 490cad5a3ad6ef0bfd3168a5063140b982f3b22a ]

In case setup_hifcpubiuctrl_regs() returns an error, because of e.g:
an unsupported CPU type, just catch that error and return instead of blindly continuing with the initialization. This fixes a NULL pointer de-reference with the code continuing without having a proper array of registers to use.

Fixes 22f7a9116eba ("soc: brcmstb: Correct CPU_CREDIT_REG offset for Brahma-B53 CPUs")
---
 drivers/soc/bcm/brcmstb/biuctrl.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/soc/bcm/brcmstb/biuctrl.c +3 -1
index 6d89ebf13b8a..c16273b31b94 100644
@@ -246,7 +246,9 @@ static int __init brcmstb_biuctrl_init(void)
 	if (!np)
 		return 0;
 
-	setup_hifcpubiuctrl_regs(np);
+	ret = setup_hifcpubiuctrl_regs(np);
+	if (ret)
+		return ret;
 
 	ret = mcp_write_pairing_set();
 	if (ret) {
Signature · 1 line
2.20.1
author maintainer
#4 lore raw

PATCH 4/91 soc: bcm: brcmstb: biuctrl: Register writes require a barrier

In reply to Greg Kroah-Hartman

[ Upstream commit 6b23af0783a54efb348f0bd781b7850636023dbb ]

The BIUCTRL register writes require that a data barrier be inserted after comitting the write to the register for the block to latch in the recently written values. Reads have no such requirement and are not changed.

Fixes 34642650e5bc ("soc: Move brcmstb to bcm/brcmstb")
---
 drivers/soc/bcm/brcmstb/biuctrl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/soc/bcm/brcmstb/biuctrl.c +1 -1
index c16273b31b94..20b63bee5b09 100644
@@ -56,7 +56,7 @@ static inline void cbc_writel(u32 val, int reg)
 	if (offset == -1)
 		return;
 
-	writel_relaxed(val,  cpubiuctrl_base + offset);
+	writel(val, cpubiuctrl_base + offset);
 }
 
 enum cpubiuctrl_regs {
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 5/91 Input: elantech - enable middle button support on 2 ThinkPads

In reply to Greg Kroah-Hartman

[ Upstream commit aa440de3058a3ef530851f9ef373fbb5f694dbc3 ]

Adding 2 new touchpad PNPIDs to enable middle button support.

---
 drivers/input/mouse/elantech.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/input/mouse/elantech.c +2 -0
index a7f8b1614559..530142b5a115 100644
@@ -1189,6 +1189,8 @@ static const char * const middle_button_pnp_ids[] = {
 	"LEN2132", /* ThinkPad P52 */
 	"LEN2133", /* ThinkPad P72 w/ NFC */
 	"LEN2134", /* ThinkPad P72 */
+	"LEN0407",
+	"LEN0408",
 	NULL
 };
 
Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH 6/91 samples, bpf: fix to change the buffer size for read()

In reply to Greg Kroah-Hartman

[ Upstream commit f7c2d64bac1be2ff32f8e4f500c6e5429c1003e0 ]

If the trace for read is larger than 4096, the return value sz will be 4096. This results in off-by-one error on buf:

    static char buf[4096];
    ssize_t sz;

    sz = read(trace_fd, buf, sizeof(buf));
    if (sz > 0) {
        buf[sz] = 0;
        puts(buf);
    }
---
 samples/bpf/bpf_load.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
samples/bpf/bpf_load.c +1 -1
index cf40a8284a38..5061a2ec4564 100644
@@ -677,7 +677,7 @@ void read_trace_pipe(void)
 		static char buf[4096];
 		ssize_t sz;
 
-		sz = read(trace_fd, buf, sizeof(buf));
+		sz = read(trace_fd, buf, sizeof(buf) - 1);
 		if (sz > 0) {
 			buf[sz] = 0;
 			puts(buf);
Signature · 1 line
2.20.1
author maintainer
#7 lore raw

PATCH 7/91 samples, bpf: suppress compiler warning

In reply to Greg Kroah-Hartman

[ Upstream commit a195cefff49f60054998333e81ee95170ce8bf92 ]

GCC 9 fails to calculate the size of local constant strings and produces a false positive:

samples/bpf/task_fd_query_user.c: In function ‘test_debug_fs_uprobe’:
samples/bpf/task_fd_query_user.c:242:67: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 215 [-Wformat-truncation=]

  242 |  snprintf(buf, sizeof(buf), "/sys/kernel/debug/tracing/events/%ss/%s/id",
      |                                                                   ^~
  243 |    event_type, event_alias);
      |                ~~~~~~~~~~~
samples/bpf/task_fd_query_user.c:242:2: note: ‘snprintf’ output between 45 and 300 bytes into a destination of size 256
  242 |  snprintf(buf, sizeof(buf), "/sys/kernel/debug/tracing/events/%ss/%s/id",
      |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  243 |    event_type, event_alias);
      |    ~~~~~~~~~~~~~~~~~~~~~~~~

Workaround this by lowering the buffer size to a reasonable value. Related GCC Bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83431

---
 samples/bpf/task_fd_query_user.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
samples/bpf/task_fd_query_user.c +1 -1
index 8381d792f138..06957f0fbe83 100644
@@ -216,7 +216,7 @@ static int test_debug_fs_uprobe(char *binary_path, long offset, bool is_return)
 {
 	const char *event_type = "uprobe";
 	struct perf_event_attr attr = {};
-	char buf[256], event_alias[256];
+	char buf[256], event_alias[sizeof("test_1234567890")];
 	__u64 probe_offset, probe_addr;
 	__u32 len, prog_id, fd_type;
 	int err, res, kfd, efd;
Signature · 1 line
2.20.1
author maintainer
#8 lore raw

PATCH 8/91 mac80211: fix rate reporting inside cfg80211_calculate_bitrate_he()

In reply to Greg Kroah-Hartman

[ Upstream commit 25d16d124a5e249e947c0487678b61dcff25cf8b ]

The reported rate is not scaled down correctly. After applying this patch, the function will behave just like the v/ht equivalents.

---
 net/wireless/util.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/wireless/util.c +1 -1
index aad1c8e858e5..d57e2f679a3e 100644
@@ -1219,7 +1219,7 @@ static u32 cfg80211_calculate_bitrate_he(struct rate_info *rate)
 	if (rate->he_dcm)
 		result /= 2;
 
-	return result;
+	return result / 10000;
 }
 
 u32 cfg80211_calculate_bitrate(struct rate_info *rate)
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 9/91 bpf: sockmap, fix use after free from sleep in psock backlog workqueue

In reply to Greg Kroah-Hartman

[ Upstream commit bd95e678e0f6e18351ecdc147ca819145db9ed7b ]

Backlog work for psock (sk_psock_backlog) might sleep while waiting for memory to free up when sending packets. However, while sleeping the socket may be closed and removed from the map by the user space side.

This breaks an assumption in sk_stream_wait_memory, which expects the wait queue to be still there when it wakes up resulting in a use-after-free shown below. To fix his mark sendmsg as MSG_DONTWAIT to avoid the sleep altogether. We already set the flag for the sendpage case but we missed the case were sendmsg is used. Sockmap is currently the only user of skb_send_sock_locked() so only the sockmap paths should be impacted.

==================================================================

BUG: KASAN: use-after-free in remove_wait_queue+0x31/0x70
Write of size 8 at addr ffff888069a0c4e8 by task kworker/0:2/110

CPU: 0 PID: 110 Comm: kworker/0:2 Not tainted 5.0.0-rc2-00335-g28f9d1a3d4fe-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
Workqueue: events sk_psock_backlog
Call Trace:
 print_address_description+0x6e/0x2b0
 ? remove_wait_queue+0x31/0x70
 kasan_report+0xfd/0x177
 ? remove_wait_queue+0x31/0x70
 ? remove_wait_queue+0x31/0x70
 remove_wait_queue+0x31/0x70
 sk_stream_wait_memory+0x4dd/0x5f0
 ? sk_stream_wait_close+0x1b0/0x1b0
 ? wait_woken+0xc0/0xc0
 ? tcp_current_mss+0xc5/0x110
 tcp_sendmsg_locked+0x634/0x15d0
 ? tcp_set_state+0x2e0/0x2e0
 ? __kasan_slab_free+0x1d1/0x230
 ? kmem_cache_free+0x70/0x140
 ? sk_psock_backlog+0x40c/0x4b0
 ? process_one_work+0x40b/0x660
 ? worker_thread+0x82/0x680
 ? kthread+0x1b9/0x1e0
 ? ret_from_fork+0x1f/0x30
 ? check_preempt_curr+0xaf/0x130
 ? iov_iter_kvec+0x5f/0x70
 ? kernel_sendmsg_locked+0xa0/0xe0
 skb_send_sock_locked+0x273/0x3c0
 ? skb_splice_bits+0x180/0x180
 ? start_thread+0xe0/0xe0
 ? update_min_vruntime.constprop.27+0x88/0xc0
 sk_psock_backlog+0xb3/0x4b0
 ? strscpy+0xbf/0x1e0
 process_one_work+0x40b/0x660
 worker_thread+0x82/0x680
 ? process_one_work+0x660/0x660
 kthread+0x1b9/0x1e0
 ? __kthread_create_on_node+0x250/0x250
 ret_from_fork+0x1f/0x30
Fixes 20bf50de3028c ("skbuff: Function to send an skbuf on a socket")
---
 net/core/skbuff.c | 1 +
 1 file changed, 1 insertion(+)
net/core/skbuff.c +1 -0
index 8b5768113acd..9b9f696281a9 100644
@@ -2302,6 +2302,7 @@ int skb_send_sock_locked(struct sock *sk, struct sk_buff *skb, int offset,
 		kv.iov_base = skb->data + offset;
 		kv.iov_len = slen;
 		memset(&msg, 0, sizeof(msg));
+		msg.msg_flags = MSG_DONTWAIT;
 
 		ret = kernel_sendmsg_locked(sk, &msg, &kv, 1, slen);
 		if (ret <= 0)
Signature · 1 line
2.20.1
author maintainer
#10 lore raw

PATCH 10/91 soundwire: stream: fix out of boundary access on port properties

In reply to Greg Kroah-Hartman

[ Upstream commit 03ecad90d3798be11b033248bbd4bbff4425a1c7 ]

Assigning local iterator to array element and using it again for indexing would cross the array boundary.
Fix this by directly referring array element without using the local variable.

---
 drivers/soundwire/stream.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/soundwire/stream.c +1 -3
index e5c7e1ef6318..907a548645b7 100644
@@ -1236,9 +1236,7 @@ struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave,
 	}
 
 	for (i = 0; i < num_ports; i++) {
-		dpn_prop = &dpn_prop[i];
-
-		if (dpn_prop->num == port_num)
+		if (dpn_prop[i].num == port_num)
 			return &dpn_prop[i];
 	}
 
Signature · 1 line
2.20.1
author maintainer
#11 lore raw

PATCH 11/91 staging:iio:ad7150: fix threshold mode config bit

In reply to Greg Kroah-Hartman

[ Upstream commit df4d737ee4d7205aaa6275158aeebff87fd14488 ]

According to the AD7150 configuration register description, bit 7 assumes value 1 when the threshold mode is fixed and 0 when it is adaptive, however, the operation that identifies this mode was considering the opposite values.

This patch renames the boolean variable to describe it correctly and properly replaces it in the places where it is used.

Fixes 531efd6aa0991 ("staging:iio:adc:ad7150: chan_spec conv + i2c_smbus commands + drop unused poweroff timeout control.")
---
 drivers/staging/iio/cdc/ad7150.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)
drivers/staging/iio/cdc/ad7150.c +11 -8
index d16084d7068c..a354ce6b2b7b 100644
@@ -6,6 +6,7 @@
  * Licensed under the GPL-2 or later.
  */
 
+#include <linux/bitfield.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
@@ -130,7 +131,7 @@ static int ad7150_read_event_config(struct iio_dev *indio_dev,
 {
 	int ret;
 	u8 threshtype;
-	bool adaptive;
+	bool thrfixed;
 	struct ad7150_chip_info *chip = iio_priv(indio_dev);
 
 	ret = i2c_smbus_read_byte_data(chip->client, AD7150_CFG);
@@ -138,21 +139,23 @@ static int ad7150_read_event_config(struct iio_dev *indio_dev,
 		return ret;
 
 	threshtype = (ret >> 5) & 0x03;
-	adaptive = !!(ret & 0x80);
+
+	/*check if threshold mode is fixed or adaptive*/
+	thrfixed = FIELD_GET(AD7150_CFG_FIX, ret);
 
 	switch (type) {
 	case IIO_EV_TYPE_MAG_ADAPTIVE:
 		if (dir == IIO_EV_DIR_RISING)
-			return adaptive && (threshtype == 0x1);
-		return adaptive && (threshtype == 0x0);
+			return !thrfixed && (threshtype == 0x1);
+		return !thrfixed && (threshtype == 0x0);
 	case IIO_EV_TYPE_THRESH_ADAPTIVE:
 		if (dir == IIO_EV_DIR_RISING)
-			return adaptive && (threshtype == 0x3);
-		return adaptive && (threshtype == 0x2);
+			return !thrfixed && (threshtype == 0x3);
+		return !thrfixed && (threshtype == 0x2);
 	case IIO_EV_TYPE_THRESH:
 		if (dir == IIO_EV_DIR_RISING)
-			return !adaptive && (threshtype == 0x1);
-		return !adaptive && (threshtype == 0x0);
+			return thrfixed && (threshtype == 0x1);
+		return thrfixed && (threshtype == 0x0);
 	default:
 		break;
 	}
Signature · 1 line
2.20.1
author maintainer
#12 lore raw

PATCH 12/91 mac80211: mesh: fix RCU warning

In reply to Greg Kroah-Hartman

[ Upstream commit 551842446ed695641a00782cd118cbb064a416a1 ]

ifmsh->csa is an RCU-protected pointer. The writer context in ieee80211_mesh_finish_csa() is already mutually exclusive with wdev->sdata.mtx, but the RCU checker did not know this. Use rcu_dereference_protected() to avoid a warning.

fixes the following warning:

[   12.519089] =============================
[   12.520042] WARNING: suspicious RCU usage
[   12.520652] 5.1.0-rc7-wt+ #16 Tainted: G        W
[   12.521409] -----------------------------
[   12.521972] net/mac80211/mesh.c:1223 suspicious rcu_dereference_check() usage!
[   12.522928] other info that might help us debug this:
[   12.523984] rcu_scheduler_active = 2, debug_locks = 1
[   12.524855] 5 locks held by kworker/u8:2/152:
[   12.525438]  #0: 00000000057be08c ((wq_completion)phy0){+.+.}, at: process_one_work+0x1a2/0x620
[   12.526607]  #1: 0000000059c6b07a ((work_completion)(&sdata->csa_finalize_work)){+.+.}, at: process_one_work+0x1a2/0x620
[   12.528001]  #2: 00000000f184ba7d (&wdev->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x2f/0x90
[   12.529116]  #3: 00000000831a1f54 (&local->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x47/0x90
[   12.530233]  #4: 00000000fd06f988 (&local->chanctx_mtx){+.+.}, at: ieee80211_csa_finalize_work+0x51/0x90
---
 net/mac80211/mesh.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
net/mac80211/mesh.c +4 -1
index d51da26e9c18..0f9446ab7e4f 100644
@@ -1212,7 +1212,8 @@ int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata)
 	ifmsh->chsw_ttl = 0;
 
 	/* Remove the CSA and MCSP elements from the beacon */
-	tmp_csa_settings = rcu_dereference(ifmsh->csa);
+	tmp_csa_settings = rcu_dereference_protected(ifmsh->csa,
+					    lockdep_is_held(&sdata->wdev.mtx));
 	RCU_INIT_POINTER(ifmsh->csa, NULL);
 	if (tmp_csa_settings)
 		kfree_rcu(tmp_csa_settings, rcu_head);
@@ -1234,6 +1235,8 @@ int ieee80211_mesh_csa_beacon(struct ieee80211_sub_if_data *sdata,
 	struct mesh_csa_settings *tmp_csa_settings;
 	int ret = 0;
 
+	lockdep_assert_held(&sdata->wdev.mtx);
+
 	tmp_csa_settings = kmalloc(sizeof(*tmp_csa_settings),
 				   GFP_ATOMIC);
 	if (!tmp_csa_settings)
Signature · 1 line
2.20.1
author maintainer
#13 lore raw

PATCH 13/91 mac80211: free peer keys before vif down in mesh

In reply to Greg Kroah-Hartman

[ Upstream commit 0112fa557c3bb3a002bc85760dc3761d737264d3 ]

freeing peer keys after vif down is resulting in peer key uninstall to fail due to interface lookup failure. so fix that.

---
 net/mac80211/mesh.c | 1 +
 1 file changed, 1 insertion(+)
net/mac80211/mesh.c +1 -0
index 0f9446ab7e4f..3162f955f3ae 100644
@@ -923,6 +923,7 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 
 	/* flush STAs and mpaths on this iface */
 	sta_info_flush(sdata);
+	ieee80211_free_keys(sdata, true);
 	mesh_path_flush_by_iface(sdata);
 
 	/* stop the beacon */
Signature · 1 line
2.20.1
author maintainer
#14 lore raw

PATCH 14/91 mwifiex: Fix possible buffer overflows at parsing bss descriptor

In reply to Greg Kroah-Hartman

[ Upstream commit 13ec7f10b87f5fc04c4ccbd491c94c7980236a74 ]

mwifiex_update_bss_desc_with_ie() calls memcpy() unconditionally in a couple places without checking the destination size. Since the source is given from user-space, this may trigger a heap buffer overflow.

Fix it by putting the length check before performing memcpy().

This fix addresses CVE-2019-3846.

---
 drivers/net/wireless/marvell/mwifiex/scan.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/wireless/marvell/mwifiex/scan.c +4 -0
index 8e483b0bc3b1..ddf985fb93ab 100644
@@ -1247,6 +1247,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 		}
 		switch (element_id) {
 		case WLAN_EID_SSID:
+			if (element_len > IEEE80211_MAX_SSID_LEN)
+				return -EINVAL;
 			bss_entry->ssid.ssid_len = element_len;
 			memcpy(bss_entry->ssid.ssid, (current_ptr + 2),
 			       element_len);
@@ -1256,6 +1258,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_SUPP_RATES:
+			if (element_len > MWIFIEX_SUPPORTED_RATES)
+				return -EINVAL;
 			memcpy(bss_entry->data_rates, current_ptr + 2,
 			       element_len);
 			memcpy(bss_entry->supported_rates, current_ptr + 2,
Signature · 1 line
2.20.1
author maintainer
#15 lore raw

PATCH 15/91 iwlwifi: Fix double-free problems in iwl_req_fw_callback()

In reply to Greg Kroah-Hartman

[ Upstream commit a8627176b0de7ba3f4524f641ddff4abf23ae4e4 ]

In the error handling code of iwl_req_fw_callback(), iwl_dealloc_ucode() is called to free data. In iwl_drv_stop(), iwl_dealloc_ucode() is called again, which can cause double-free problems.

To fix this bug, the call to iwl_dealloc_ucode() in iwl_req_fw_callback() is deleted.

This bug is found by a runtime fuzzing tool named FIZZER written by us.

---
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 1 -
 1 file changed, 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/iwl-drv.c +0 -1
index c0631255aee7..db6628d390a2 100644
@@ -1547,7 +1547,6 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
 	goto free;
 
  out_free_fw:
-	iwl_dealloc_ucode(drv);
 	release_firmware(ucode_raw);
  out_unbind:
 	complete(&drv->request_firmware_complete);
Signature · 1 line
2.20.1
author maintainer
#16 lore raw

PATCH 16/91 mwifiex: Fix heap overflow in mwifiex_uap_parse_tail_ies()

In reply to Greg Kroah-Hartman

[ Upstream commit 69ae4f6aac1578575126319d3f55550e7e440449 ]

A few places in mwifiex_uap_parse_tail_ies() perform memcpy() unconditionally, which may lead to either buffer overflow or read over boundary.

This patch addresses the issues by checking the read size and the destination size at each place more properly. Along with the fixes, the patch cleans up the code slightly by introducing a temporary variable for the token size, and unifies the error path with the standard goto statement.

---
 drivers/net/wireless/marvell/mwifiex/ie.c | 47 +++++++++++++++--------
 1 file changed, 31 insertions(+), 16 deletions(-)
drivers/net/wireless/marvell/mwifiex/ie.c +31 -16
index 75cbd609d606..801a2d7b020a 100644
@@ -329,6 +329,8 @@ static int mwifiex_uap_parse_tail_ies(struct mwifiex_private *priv,
 	struct ieee80211_vendor_ie *vendorhdr;
 	u16 gen_idx = MWIFIEX_AUTO_IDX_MASK, ie_len = 0;
 	int left_len, parsed_len = 0;
+	unsigned int token_len;
+	int err = 0;
 
 	if (!info->tail || !info->tail_len)
 		return 0;
@@ -344,6 +346,12 @@ static int mwifiex_uap_parse_tail_ies(struct mwifiex_private *priv,
 	 */
 	while (left_len > sizeof(struct ieee_types_header)) {
 		hdr = (void *)(info->tail + parsed_len);
+		token_len = hdr->len + sizeof(struct ieee_types_header);
+		if (token_len > left_len) {
+			err = -EINVAL;
+			goto out;
+		}
+
 		switch (hdr->element_id) {
 		case WLAN_EID_SSID:
 		case WLAN_EID_SUPP_RATES:
@@ -361,16 +369,19 @@ static int mwifiex_uap_parse_tail_ies(struct mwifiex_private *priv,
 			if (cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
 						    WLAN_OUI_TYPE_MICROSOFT_WMM,
 						    (const u8 *)hdr,
-						    hdr->len + sizeof(struct ieee_types_header)))
+						    token_len))
 				break;
 		default:
-			memcpy(gen_ie->ie_buffer + ie_len, hdr,
-			       hdr->len + sizeof(struct ieee_types_header));
-			ie_len += hdr->len + sizeof(struct ieee_types_header);
+			if (ie_len + token_len > IEEE_MAX_IE_SIZE) {
+				err = -EINVAL;
+				goto out;
+			}
+			memcpy(gen_ie->ie_buffer + ie_len, hdr, token_len);
+			ie_len += token_len;
 			break;
 		}
-		left_len -= hdr->len + sizeof(struct ieee_types_header);
-		parsed_len += hdr->len + sizeof(struct ieee_types_header);
+		left_len -= token_len;
+		parsed_len += token_len;
 	}
 
 	/* parse only WPA vendor IE from tail, WMM IE is configured by
@@ -380,15 +391,17 @@ static int mwifiex_uap_parse_tail_ies(struct mwifiex_private *priv,
 						    WLAN_OUI_TYPE_MICROSOFT_WPA,
 						    info->tail, info->tail_len);
 	if (vendorhdr) {
-		memcpy(gen_ie->ie_buffer + ie_len, vendorhdr,
-		       vendorhdr->len + sizeof(struct ieee_types_header));
-		ie_len += vendorhdr->len + sizeof(struct ieee_types_header);
+		token_len = vendorhdr->len + sizeof(struct ieee_types_header);
+		if (ie_len + token_len > IEEE_MAX_IE_SIZE) {
+			err = -EINVAL;
+			goto out;
+		}
+		memcpy(gen_ie->ie_buffer + ie_len, vendorhdr, token_len);
+		ie_len += token_len;
 	}
 
-	if (!ie_len) {
-		kfree(gen_ie);
-		return 0;
-	}
+	if (!ie_len)
+		goto out;
 
 	gen_ie->ie_index = cpu_to_le16(gen_idx);
 	gen_ie->mgmt_subtype_mask = cpu_to_le16(MGMT_MASK_BEACON |
@@ -398,13 +411,15 @@ static int mwifiex_uap_parse_tail_ies(struct mwifiex_private *priv,
 
 	if (mwifiex_update_uap_custom_ie(priv, gen_ie, &gen_idx, NULL, NULL,
 					 NULL, NULL)) {
-		kfree(gen_ie);
-		return -1;
+		err = -EINVAL;
+		goto out;
 	}
 
 	priv->gen_idx = gen_idx;
+
+ out:
 	kfree(gen_ie);
-	return 0;
+	return err;
 }
 
 /* This function parses different IEs-head & tail IEs, beacon IEs,
Signature · 1 line
2.20.1
author maintainer
#17 lore raw

PATCH 17/91 soundwire: intel: set dai min and max channels correctly

In reply to Greg Kroah-Hartman

[ Upstream commit 39194128701bf2af9bbc420ffe6e3cb5d2c16061 ]

Looks like there is a copy paste error.
This patch fixes it!

---
 drivers/soundwire/intel.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/soundwire/intel.c +2 -2
index 0a8990e758f9..a6e2581ada70 100644
@@ -651,8 +651,8 @@ static int intel_create_dai(struct sdw_cdns *cdns,
 				return -ENOMEM;
 			}
 
-			dais[i].playback.channels_min = 1;
-			dais[i].playback.channels_max = max_ch;
+			dais[i].capture.channels_min = 1;
+			dais[i].capture.channels_max = max_ch;
 			dais[i].capture.rates = SNDRV_PCM_RATE_48000;
 			dais[i].capture.formats = SNDRV_PCM_FMTBIT_S16_LE;
 		}
Signature · 1 line
2.20.1
author maintainer
#18 lore raw

PATCH 18/91 dt-bindings: can: mcp251x: add mcp25625 support

In reply to Greg Kroah-Hartman

[ Upstream commit 0df82dcd55832a99363ab7f9fab954fcacdac3ae ]

Fully compatible with mcp2515, the mcp25625 have integrated transceiver.

This patch add the mcp25625 to the device tree bindings documentation.

---
 Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt +1 -0
index 188c8bd4eb67..5a0111d4de58 100644
@@ -4,6 +4,7 @@ Required properties:
  - compatible: Should be one of the following:
    - "microchip,mcp2510" for MCP2510.
    - "microchip,mcp2515" for MCP2515.
+   - "microchip,mcp25625" for MCP25625.
  - reg: SPI chip select.
  - clocks: The clock feeding the CAN controller.
  - interrupts: Should contain IRQ line for the CAN controller.
Signature · 1 line
2.20.1
author maintainer
#19 lore raw

PATCH 19/91 can: mcp251x: add support for mcp25625

In reply to Greg Kroah-Hartman

[ Upstream commit 35b7fa4d07c43ad79b88e6462119e7140eae955c ]

Fully compatible with mcp2515, the mcp25625 have integrated transceiver.

This patch adds support for the mcp25625 to the existing mcp251x driver.

---
 drivers/net/can/spi/Kconfig   |  5 +++--
 drivers/net/can/spi/mcp251x.c | 25 ++++++++++++++++---------
 2 files changed, 19 insertions(+), 11 deletions(-)
drivers/net/can/spi/Kconfig +3 -2
index 8f2e0dd7b756..792e9c6c4a2f 100644
@@ -8,9 +8,10 @@ config CAN_HI311X
 	  Driver for the Holt HI311x SPI CAN controllers.
 
 config CAN_MCP251X
-	tristate "Microchip MCP251x SPI CAN controllers"
+	tristate "Microchip MCP251x and MCP25625 SPI CAN controllers"
 	depends on HAS_DMA
 	---help---
-	  Driver for the Microchip MCP251x SPI CAN controllers.
+	  Driver for the Microchip MCP251x and MCP25625 SPI CAN
+	  controllers.
 
 endmenu
drivers/net/can/spi/mcp251x.c +16 -9
index e90817608645..da64e71a62ee 100644
@@ -1,5 +1,5 @@
 /*
- * CAN bus driver for Microchip 251x CAN Controller with SPI Interface
+ * CAN bus driver for Microchip 251x/25625 CAN Controller with SPI Interface
  *
  * MCP2510 support and bug fixes by Christian Pellegrin
  * <[email protected]>
@@ -41,7 +41,7 @@
  * static struct spi_board_info spi_board_info[] = {
  *         {
  *                 .modalias = "mcp2510",
- *			// or "mcp2515" depending on your controller
+ *			// "mcp2515" or "mcp25625" depending on your controller
  *                 .platform_data = &mcp251x_info,
  *                 .irq = IRQ_EINT13,
  *                 .max_speed_hz = 2*1000*1000,
@@ -238,6 +238,7 @@ static const struct can_bittiming_const mcp251x_bittiming_const = {
 enum mcp251x_model {
 	CAN_MCP251X_MCP2510	= 0x2510,
 	CAN_MCP251X_MCP2515	= 0x2515,
+	CAN_MCP251X_MCP25625	= 0x25625,
 };
 
 struct mcp251x_priv {
@@ -280,7 +281,6 @@ static inline int mcp251x_is_##_model(struct spi_device *spi) \
 }
 
 MCP251X_IS(2510);
-MCP251X_IS(2515);
 
 static void mcp251x_clean(struct net_device *net)
 {
@@ -639,7 +639,7 @@ static int mcp251x_hw_reset(struct spi_device *spi)
 
 	/* Wait for oscillator startup timer after reset */
 	mdelay(MCP251X_OST_DELAY_MS);
-	
+
 	reg = mcp251x_read_reg(spi, CANSTAT);
 	if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF)
 		return -ENODEV;
@@ -820,9 +820,8 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
 		/* receive buffer 0 */
 		if (intf & CANINTF_RX0IF) {
 			mcp251x_hw_rx(spi, 0);
-			/*
-			 * Free one buffer ASAP
-			 * (The MCP2515 does this automatically.)
+			/* Free one buffer ASAP
+			 * (The MCP2515/25625 does this automatically.)
 			 */
 			if (mcp251x_is_2510(spi))
 				mcp251x_write_bits(spi, CANINTF, CANINTF_RX0IF, 0x00);
@@ -831,7 +830,7 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
 		/* receive buffer 1 */
 		if (intf & CANINTF_RX1IF) {
 			mcp251x_hw_rx(spi, 1);
-			/* the MCP2515 does this automatically */
+			/* The MCP2515/25625 does this automatically. */
 			if (mcp251x_is_2510(spi))
 				clear_intf |= CANINTF_RX1IF;
 		}
@@ -1006,6 +1005,10 @@ static const struct of_device_id mcp251x_of_match[] = {
 		.compatible	= "microchip,mcp2515",
 		.data		= (void *)CAN_MCP251X_MCP2515,
 	},
+	{
+		.compatible	= "microchip,mcp25625",
+		.data		= (void *)CAN_MCP251X_MCP25625,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mcp251x_of_match);
@@ -1019,6 +1022,10 @@ static const struct spi_device_id mcp251x_id_table[] = {
 		.name		= "mcp2515",
 		.driver_data	= (kernel_ulong_t)CAN_MCP251X_MCP2515,
 	},
+	{
+		.name		= "mcp25625",
+		.driver_data	= (kernel_ulong_t)CAN_MCP251X_MCP25625,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, mcp251x_id_table);
@@ -1259,5 +1266,5 @@ module_spi_driver(mcp251x_can_driver);
 
 MODULE_AUTHOR("Chris Elston <[email protected]>, "
 	      "Christian Pellegrin <[email protected]>");
-MODULE_DESCRIPTION("Microchip 251x CAN driver");
+MODULE_DESCRIPTION("Microchip 251x/25625 CAN driver");
 MODULE_LICENSE("GPL v2");
Signature · 1 line
2.20.1
author maintainer
#20 lore raw

PATCH 20/91 can: m_can: implement errata "Needless activation of MRAF irq"

In reply to Greg Kroah-Hartman

[ Upstream commit 3e82f2f34c930a2a0a9e69fdc2de2f2f1388b442 ]

During frame reception while the MCAN is in Error Passive state and the Receive Error Counter has thevalue MCAN_ECR.REC = 127, it may happen that MCAN_IR.MRAF is set although there was no Message RAM access failure. If MCAN_IR.MRAF is enabled, an interrupt to the Host CPU is generated.

Work around:
The Message RAM Access Failure interrupt routine needs to check whether

    MCAN_ECR.RP = '1' and MCAN_ECR.REC = '127'.

In this case, reset MCAN_IR.MRAF. No further action is required. This affects versions older than 3.2.0

Errata explained on Sama5d2 SoC which includes this hardware block:
http://ww1.microchip.com/downloads/en/DeviceDoc/SAMA5D2-Family-Silicon-Errata-and-Data-Sheet-Clarification-DS80000803B.pdf
chapter 6.2

Reproducibility: If 2 devices with m_can are connected back to back, configuring different bitrate on them will lead to interrupt storm on the receiving side, with error "Message RAM access failure occurred". Another way is to have a bad hardware connection. Bad wire connection can lead to this issue as well.

This patch fixes the issue according to provided workaround.

---
 drivers/net/can/m_can/m_can.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
drivers/net/can/m_can/m_can.c +21 -0
index 9b449400376b..deb274a19ba0 100644
@@ -822,6 +822,27 @@ static int m_can_poll(struct napi_struct *napi, int quota)
 	if (!irqstatus)
 		goto end;
 
+	/* Errata workaround for issue "Needless activation of MRAF irq"
+	 * During frame reception while the MCAN is in Error Passive state
+	 * and the Receive Error Counter has the value MCAN_ECR.REC = 127,
+	 * it may happen that MCAN_IR.MRAF is set although there was no
+	 * Message RAM access failure.
+	 * If MCAN_IR.MRAF is enabled, an interrupt to the Host CPU is generated
+	 * The Message RAM Access Failure interrupt routine needs to check
+	 * whether MCAN_ECR.RP = ’1’ and MCAN_ECR.REC = 127.
+	 * In this case, reset MCAN_IR.MRAF. No further action is required.
+	 */
+	if ((priv->version <= 31) && (irqstatus & IR_MRAF) &&
+	    (m_can_read(priv, M_CAN_ECR) & ECR_RP)) {
+		struct can_berr_counter bec;
+
+		__m_can_get_berr_counter(dev, &bec);
+		if (bec.rxerr == 127) {
+			m_can_write(priv, M_CAN_IR, IR_MRAF);
+			irqstatus &= ~IR_MRAF;
+		}
+	}
+
 	psr = m_can_read(priv, M_CAN_PSR);
 	if (irqstatus & IR_ERR_STATE)
 		work_done += m_can_handle_state_errors(dev, psr);
Signature · 1 line
2.20.1
author maintainer
#21 lore raw

PATCH 21/91 can: af_can: Fix error path of can_init()

In reply to Greg Kroah-Hartman

[ Upstream commit c5a3aed1cd3152429348ee1fe5cdcca65fe901ce ]

This patch add error path for can_init() to avoid possible crash if some error occurs.

Fixes 0d66548a10cb ("[CAN]: Add PF_CAN core module")
---
 net/can/af_can.c | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)
net/can/af_can.c +21 -3
index e386d654116d..04132b0b5d36 100644
@@ -959,6 +959,8 @@ static struct pernet_operations can_pernet_ops __read_mostly = {
 
 static __init int can_init(void)
 {
+	int err;
+
 	/* check for correct padding to be able to use the structs similarly */
 	BUILD_BUG_ON(offsetof(struct can_frame, can_dlc) !=
 		     offsetof(struct canfd_frame, len) ||
@@ -972,15 +974,31 @@ static __init int can_init(void)
 	if (!rcv_cache)
 		return -ENOMEM;
 
-	register_pernet_subsys(&can_pernet_ops);
+	err = register_pernet_subsys(&can_pernet_ops);
+	if (err)
+		goto out_pernet;
 
 	/* protocol register */
-	sock_register(&can_family_ops);
-	register_netdevice_notifier(&can_netdev_notifier);
+	err = sock_register(&can_family_ops);
+	if (err)
+		goto out_sock;
+	err = register_netdevice_notifier(&can_netdev_notifier);
+	if (err)
+		goto out_notifier;
+
 	dev_add_pack(&can_packet);
 	dev_add_pack(&canfd_packet);
 
 	return 0;
+
+out_notifier:
+	sock_unregister(PF_CAN);
+out_sock:
+	unregister_pernet_subsys(&can_pernet_ops);
+out_pernet:
+	kmem_cache_destroy(rcv_cache);
+
+	return err;
 }
 
 static __exit void can_exit(void)
Signature · 1 line
2.20.1
author maintainer
#22 lore raw

PATCH 22/91 net: phy: rename Asix Electronics PHY driver

In reply to Greg Kroah-Hartman

[ Upstream commit a9520543b123bbd7275a0ab8d0375a5412683b41 ]

[Resent to net instead of net-next - may clash with Anders Roxell's patch series addressing duplicate module names]

Commit 31dd83b96641 ("net-next: phy: new Asix Electronics PHY driver") introduced a new PHY driver drivers/net/phy/asix.c that causes a module name conflict with a pre-existiting driver (drivers/net/usb/asix.c).

The PHY driver is used by the X-Surf 100 ethernet card driver, and loaded by that driver via its PHY ID. A rename of the driver looks unproblematic.

Rename PHY driver to ax88796b.c in order to resolve name conflict.

Fixes 31dd83b96641 ("net-next: phy: new Asix Electronics PHY driver")
---
 drivers/net/ethernet/8390/Kconfig      | 2 +-
 drivers/net/phy/Kconfig                | 2 +-
 drivers/net/phy/Makefile               | 2 +-
 drivers/net/phy/{asix.c => ax88796b.c} | 0
 4 files changed, 3 insertions(+), 3 deletions(-)
 rename drivers/net/phy/{asix.c => ax88796b.c} (100%)
drivers/net/ethernet/8390/Kconfig +1 -1
index f2f0264c58ba..443b34e2725f 100644
@@ -49,7 +49,7 @@ config XSURF100
 	tristate "Amiga XSurf 100 AX88796/NE2000 clone support"
 	depends on ZORRO
 	select AX88796
-	select ASIX_PHY
+	select AX88796B_PHY
 	help
 	  This driver is for the Individual Computers X-Surf 100 Ethernet
 	  card (based on the Asix AX88796 chip). If you have such a card,
drivers/net/phy/Kconfig +1 -1
index 82070792edbb..1f5fd24cd749 100644
@@ -227,7 +227,7 @@ config AQUANTIA_PHY
 	---help---
 	  Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
 
-config ASIX_PHY
+config AX88796B_PHY
 	tristate "Asix PHYs"
 	help
 	  Currently supports the Asix Electronics PHY found in the X-Surf 100
drivers/net/phy/Makefile +1 -1
index 5805c0b7d60e..f21cda9d865e 100644
@@ -46,7 +46,7 @@ obj-y				+= $(sfp-obj-y) $(sfp-obj-m)
 
 obj-$(CONFIG_AMD_PHY)		+= amd.o
 obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia.o
-obj-$(CONFIG_ASIX_PHY)		+= asix.o
+obj-$(CONFIG_AX88796B_PHY)	+= ax88796b.o
 obj-$(CONFIG_AT803X_PHY)	+= at803x.o
 obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
 obj-$(CONFIG_BCM7XXX_PHY)	+= bcm7xxx.o
drivers/net/phy/ax88796b.c renamed from drivers/net/phy/asix.c +0 -0
similarity index 100%
rename from drivers/net/phy/asix.c
rename to drivers/net/phy/ax88796b.c
Signature · 1 line
2.20.1
author maintainer
#23 lore raw

PATCH 23/91 ibmvnic: Do not close unopened driver during reset

In reply to Greg Kroah-Hartman

[ Upstream commit 1f94608b0ce141be5286dde31270590bdf35b86a ]

Check driver state before halting it during a reset. If the driver is not running, do nothing. Otherwise, a request to deactivate a down link can cause an error and the reset will fail.

---
 drivers/net/ethernet/ibm/ibmvnic.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/ethernet/ibm/ibmvnic.c +2 -1
index 426789e2c23d..bf0a5fe0da17 100644
@@ -1754,7 +1754,8 @@ static int do_reset(struct ibmvnic_adapter *adapter,
 
 	ibmvnic_cleanup(netdev);
 
-	if (adapter->reset_reason != VNIC_RESET_MOBILITY &&
+	if (reset_state == VNIC_OPEN &&
+	    adapter->reset_reason != VNIC_RESET_MOBILITY &&
 	    adapter->reset_reason != VNIC_RESET_FAILOVER) {
 		rc = __ibmvnic_close(netdev);
 		if (rc)
Signature · 1 line
2.20.1
author maintainer
#24 lore raw

PATCH 24/91 ibmvnic: Refresh device multicast list after reset

In reply to Greg Kroah-Hartman

[ Upstream commit be32a24372cf162e825332da1a7ccef058d4f20b ]

It was observed that multicast packets were no longer received after a device reset. The fix is to resend the current multicast list to the backing device after recovery.

---
 drivers/net/ethernet/ibm/ibmvnic.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/net/ethernet/ibm/ibmvnic.c +3 -0
index bf0a5fe0da17..b88af81499e8 100644
@@ -1854,6 +1854,9 @@ static int do_reset(struct ibmvnic_adapter *adapter,
 		return 0;
 	}
 
+	/* refresh device's multicast list */
+	ibmvnic_set_multi(netdev);
+
 	/* kick napi */
 	for (i = 0; i < adapter->req_rx_queues; i++)
 		napi_schedule(&adapter->napi[i]);
Signature · 1 line
2.20.1
author maintainer
#25 lore raw

PATCH 25/91 ibmvnic: Fix unchecked return codes of memory allocations

In reply to Greg Kroah-Hartman

[ Upstream commit 7c940b1a5291e5069d561f5b8f0e51db6b7a259a ]

The return values for these memory allocations are unchecked, which may cause an oops if the driver does not handle them after a failure. Fix by checking the function's return code.

---
 drivers/net/ethernet/ibm/ibmvnic.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/net/ethernet/ibm/ibmvnic.c +7 -6
index b88af81499e8..0ae43d27cdcf 100644
@@ -438,9 +438,10 @@ static int reset_rx_pools(struct ibmvnic_adapter *adapter)
 		if (rx_pool->buff_size != be64_to_cpu(size_array[i])) {
 			free_long_term_buff(adapter, &rx_pool->long_term_buff);
 			rx_pool->buff_size = be64_to_cpu(size_array[i]);
-			alloc_long_term_buff(adapter, &rx_pool->long_term_buff,
-					     rx_pool->size *
-					     rx_pool->buff_size);
+			rc = alloc_long_term_buff(adapter,
+						  &rx_pool->long_term_buff,
+						  rx_pool->size *
+						  rx_pool->buff_size);
 		} else {
 			rc = reset_long_term_buff(adapter,
 						  &rx_pool->long_term_buff);
@@ -706,9 +707,9 @@ static int init_tx_pools(struct net_device *netdev)
 			return rc;
 		}
 
-		init_one_tx_pool(netdev, &adapter->tso_pool[i],
-				 IBMVNIC_TSO_BUFS,
-				 IBMVNIC_TSO_BUF_SZ);
+		rc = init_one_tx_pool(netdev, &adapter->tso_pool[i],
+				      IBMVNIC_TSO_BUFS,
+				      IBMVNIC_TSO_BUF_SZ);
 		if (rc) {
 			release_tx_pools(adapter);
 			return rc;
Signature · 1 line
2.20.1
author maintainer
#26 lore raw

PATCH 26/91 ARM: dts: am335x phytec boards: Fix cd-gpios active level

In reply to Greg Kroah-Hartman

[ Upstream commit 8a0098c05a272c9a68f6885e09755755b612459c ]

Active level of the mmc1 cd gpio needs to be low instead of high. Fix PCM-953 and phyBOARD-WEGA.

---
 arch/arm/boot/dts/am335x-pcm-953.dtsi | 2 +-
 arch/arm/boot/dts/am335x-wega.dtsi    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/am335x-pcm-953.dtsi +1 -1
index 1ec8e0d80191..572fbd254690 100644
@@ -197,7 +197,7 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
arch/arm/boot/dts/am335x-wega.dtsi +1 -1
index 8ce541739b24..83e4fe595e37 100644
@@ -157,7 +157,7 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
Signature · 1 line
2.20.1
author maintainer
#27 lore raw

PATCH 27/91 s390/boot: disable address-of-packed-member warning

In reply to Greg Kroah-Hartman

[ Upstream commit f9364df30420987e77599c4789ec0065c609a507 ]

Get rid of gcc9 warnings like this:

arch/s390/boot/ipl_report.c: In function 'find_bootdata_space':
arch/s390/boot/ipl_report.c:42:26: warning: taking address of packed member of 'struct ipl_rb_components' may result in an unaligned pointer value [-Waddress-of-packed-member]
42 | for_each_rb_entry(comp, comps)
| ^~~~~

This is effectively the s390 variant of commit 20c6c1890455 ("x86/boot: Disable the address-of-packed-member compiler warning").

---
 arch/s390/Makefile | 1 +
 1 file changed, 1 insertion(+)
arch/s390/Makefile +1 -0
index ee65185bbc80..e6c2e8925fef 100644
@@ -24,6 +24,7 @@ KBUILD_CFLAGS_DECOMPRESSOR += -DDISABLE_BRANCH_PROFILING -D__NO_FORTIFY
 KBUILD_CFLAGS_DECOMPRESSOR += -fno-delete-null-pointer-checks -msoft-float
 KBUILD_CFLAGS_DECOMPRESSOR += -fno-asynchronous-unwind-tables
 KBUILD_CFLAGS_DECOMPRESSOR += $(call cc-option,-ffreestanding)
+KBUILD_CFLAGS_DECOMPRESSOR += $(call cc-disable-warning, address-of-packed-member)
 KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_DEBUG_INFO),-g)
 KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_DEBUG_INFO_DWARF4), $(call cc-option, -gdwarf-4,))
 UTS_MACHINE	:= s390x
Signature · 1 line
2.20.1
author maintainer
#28 lore raw

PATCH 28/91 drm/vmwgfx: Honor the sg list segment size limitation

In reply to Greg Kroah-Hartman

[ Upstream commit bde15555ba61c7f664f40fd3c6fdbdb63f784c9b ]

When building sg tables, honor the device sg list segment size limitation.

---
 drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c +5 -5
index 31786b200afc..f388ad51e72b 100644
@@ -448,11 +448,11 @@ static int vmw_ttm_map_dma(struct vmw_ttm_tt *vmw_tt)
 		if (unlikely(ret != 0))
 			return ret;
 
-		ret = sg_alloc_table_from_pages(&vmw_tt->sgt, vsgt->pages,
-						vsgt->num_pages, 0,
-						(unsigned long)
-						vsgt->num_pages << PAGE_SHIFT,
-						GFP_KERNEL);
+		ret = __sg_alloc_table_from_pages
+			(&vmw_tt->sgt, vsgt->pages, vsgt->num_pages, 0,
+			 (unsigned long) vsgt->num_pages << PAGE_SHIFT,
+			 dma_get_max_seg_size(dev_priv->dev->dev),
+			 GFP_KERNEL);
 		if (unlikely(ret != 0))
 			goto out_sg_alloc_fail;
 
Signature · 1 line
2.20.1
author maintainer
#29 lore raw

PATCH 29/91 drm/vmwgfx: fix a warning due to missing dma_parms

In reply to Greg Kroah-Hartman

[ Upstream commit 39916897cd815a0ee07ba1f6820cf88a63e459fc ]

Booting up with DMA_API_DEBUG_SG=y generates a warning due to the driver forgot to set dma_parms appropriately. Set it just after vmw_dma_masks() in vmw_driver_load().

DMA-API: vmwgfx 0000:00:0f.0: mapping sg segment longer than device claims to support [len=2097152] [max=65536]

WARNING: CPU: 2 PID: 261 at kernel/dma/debug.c:1232
debug_dma_map_sg+0x360/0x480
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop
Reference Platform, BIOS 6.00 04/13/2018
RIP: 0010:debug_dma_map_sg+0x360/0x480
Call Trace:
 vmw_ttm_map_dma+0x3b1/0x5b0 [vmwgfx]
 vmw_bo_map_dma+0x25/0x30 [vmwgfx]
 vmw_otables_setup+0x2a8/0x750 [vmwgfx]
 vmw_request_device_late+0x78/0xc0 [vmwgfx]
 vmw_request_device+0xee/0x4e0 [vmwgfx]
 vmw_driver_load.cold+0x757/0xd84 [vmwgfx]
 drm_dev_register+0x1ff/0x340 [drm]
 drm_get_pci_dev+0x110/0x290 [drm]
 vmw_probe+0x15/0x20 [vmwgfx]
 local_pci_probe+0x7a/0xc0
 pci_device_probe+0x1b9/0x290
 really_probe+0x1b5/0x630
 driver_probe_device+0xa3/0x1a0
 device_driver_attach+0x94/0xa0
 __driver_attach+0xdd/0x1c0
 bus_for_each_dev+0xfe/0x150
 driver_attach+0x2d/0x40
 bus_add_driver+0x290/0x350
 driver_register+0xdc/0x1d0
 __pci_register_driver+0xda/0xf0
 vmwgfx_init+0x34/0x1000 [vmwgfx]
 do_one_initcall+0xe5/0x40a
 do_init_module+0x10f/0x3a0
 load_module+0x16a5/0x1a40
 __se_sys_finit_module+0x183/0x1c0
 __x64_sys_finit_module+0x43/0x50
 do_syscall_64+0xc8/0x606
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes fb1d9738ca05 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU")
---
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +3 -0
index 82ae68716696..05a800807c26 100644
@@ -789,6 +789,9 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
 	if (unlikely(ret != 0))
 		goto out_err0;
 
+	dma_set_max_seg_size(dev->dev, min_t(unsigned int, U32_MAX & PAGE_MASK,
+					     SCATTERLIST_MAX_SEGMENT));
+
 	if (dev_priv->capabilities & SVGA_CAP_GMR2) {
 		DRM_INFO("Max GMR ids is %u\n",
 			 (unsigned)dev_priv->max_gmr_ids);
Signature · 1 line
2.20.1
author maintainer
#30 lore raw

PATCH 30/91 riscv: Fix udelay in RV32.

In reply to Greg Kroah-Hartman

[ Upstream commit d0e1f2110a5eeb6e410b2dd37d98bc5b30da7bc7 ]

In RV32, udelay would delay the wrong cycle. When it shifts right "UDELAY_SHIFT" bits, it either delays 0 cycle or 1 cycle. It only works correctly in RV64. Because the 'ucycles' always needs to be 64 bits variable.

---
 arch/riscv/lib/delay.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/riscv/lib/delay.c +1 -1
index dce8ae24c6d3..ee6853c1e341 100644
@@ -88,7 +88,7 @@ EXPORT_SYMBOL(__delay);
 
 void udelay(unsigned long usecs)
 {
-	unsigned long ucycles = usecs * lpj_fine * UDELAY_MULT;
+	u64 ucycles = (u64)usecs * lpj_fine * UDELAY_MULT;
 
 	if (unlikely(usecs > MAX_UDELAY_US)) {
 		__delay((u64)usecs * riscv_timebase / 1000000ULL);
Signature · 1 line
2.20.1
author maintainer
#31 lore raw

PATCH 31/91 Input: imx_keypad - make sure keyboard can always wake up system

In reply to Greg Kroah-Hartman

[ Upstream commit ce9a53eb3dbca89e7ad86673d94ab886e9bea704 ]

There are several scenarios that keyboard can NOT wake up system from suspend, e.g., if a keyboard is depressed between system device suspend phase and device noirq suspend phase, the keyboard ISR will be called and both keyboard depress and release interrupts will be disabled, then keyboard will no longer be able to wake up system. Another scenario would be, if a keyboard is kept depressed, and then system goes into suspend, the expected behavior would be when keyboard is released, system will be waked up, but current implementation can NOT achieve that, because both depress and release interrupts are disabled in ISR, and the event check is still in progress.

To fix these issues, need to make sure keyboard's depress or release interrupt is enabled after noirq device suspend phase, this patch moves the suspend/resume callback to noirq suspend/resume phase, and enable the corresponding interrupt according to current keyboard status.

---
 drivers/input/keyboard/imx_keypad.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)
drivers/input/keyboard/imx_keypad.c +14 -4
index 539cb670de41..ae9c51cc85f9 100644
@@ -526,11 +526,12 @@ static int imx_keypad_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __maybe_unused imx_kbd_suspend(struct device *dev)
+static int __maybe_unused imx_kbd_noirq_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct imx_keypad *kbd = platform_get_drvdata(pdev);
 	struct input_dev *input_dev = kbd->input_dev;
+	unsigned short reg_val = readw(kbd->mmio_base + KPSR);
 
 	/* imx kbd can wake up system even clock is disabled */
 	mutex_lock(&input_dev->mutex);
@@ -540,13 +541,20 @@ static int __maybe_unused imx_kbd_suspend(struct device *dev)
 
 	mutex_unlock(&input_dev->mutex);
 
-	if (device_may_wakeup(&pdev->dev))
+	if (device_may_wakeup(&pdev->dev)) {
+		if (reg_val & KBD_STAT_KPKD)
+			reg_val |= KBD_STAT_KRIE;
+		if (reg_val & KBD_STAT_KPKR)
+			reg_val |= KBD_STAT_KDIE;
+		writew(reg_val, kbd->mmio_base + KPSR);
+
 		enable_irq_wake(kbd->irq);
+	}
 
 	return 0;
 }
 
-static int __maybe_unused imx_kbd_resume(struct device *dev)
+static int __maybe_unused imx_kbd_noirq_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct imx_keypad *kbd = platform_get_drvdata(pdev);
@@ -570,7 +578,9 @@ static int __maybe_unused imx_kbd_resume(struct device *dev)
 	return ret;
 }
 
-static SIMPLE_DEV_PM_OPS(imx_kbd_pm_ops, imx_kbd_suspend, imx_kbd_resume);
+static const struct dev_pm_ops imx_kbd_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(imx_kbd_noirq_suspend, imx_kbd_noirq_resume)
+};
 
 static struct platform_driver imx_keypad_driver = {
 	.driver		= {
Signature · 1 line
2.20.1
author maintainer
#32 lore raw

PATCH 32/91 KVM: arm/arm64: vgic: Fix kvm_device leak in vgic_its_destroy

In reply to Greg Kroah-Hartman

[ Upstream commit 4729ec8c1e1145234aeeebad5d96d77f4ccbb00a ]

kvm_device->destroy() seems to be supposed to free its kvm_device struct, but vgic_its_destroy() is not currently doing this, resulting in a memory leak, resulting in kmemleak reports such as the following:

unreferenced object 0xffff800aeddfe280 (size 128):
comm "qemu-system-aar", pid 13799, jiffies 4299827317 (age 1569.844s) [...]
backtrace:

    [<00000000a08b80e2>] kmem_cache_alloc+0x178/0x208
    [<00000000dcad2bd3>] kvm_vm_ioctl+0x350/0xbc0

Fix it.

Cc Andre Przywara <[email protected]>
Fixes 1085fdc68c60 ("KVM: arm64: vgic-its: Introduce new KVM ITS device")
---
 virt/kvm/arm/vgic/vgic-its.c | 1 +
 1 file changed, 1 insertion(+)
virt/kvm/arm/vgic/vgic-its.c +1 -0
index 621bb004067e..0dbe332eb343 100644
@@ -1750,6 +1750,7 @@ static void vgic_its_destroy(struct kvm_device *kvm_dev)
 
 	mutex_unlock(&its->its_lock);
 	kfree(its);
+	kfree(kvm_dev);/* alloc by kvm_ioctl_create_device, free by .destroy */
 }
 
 int vgic_its_has_attr_regs(struct kvm_device *dev,
Signature · 1 line
2.20.1
author maintainer
#33 lore raw

PATCH 33/91 mlxsw: spectrum: Disallow prio-tagged packets when PVID is removed

In reply to Greg Kroah-Hartman

[ Upstream commit 4b14cc313f076c37b646cee06a85f0db59cf216c ]

When PVID is removed from a bridge port, the Linux bridge drops both untagged and prio-tagged packets. Align mlxsw with this behavior.

Fixes 148f472da5db ("mlxsw: reg: Add the Switch Port Acceptable Frame Types register")
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlxsw/reg.h +1 -1
index 6e8b619b769b..aee58b3892f2 100644
@@ -877,7 +877,7 @@ static inline void mlxsw_reg_spaft_pack(char *payload, u8 local_port,
 	MLXSW_REG_ZERO(spaft, payload);
 	mlxsw_reg_spaft_local_port_set(payload, local_port);
 	mlxsw_reg_spaft_allow_untagged_set(payload, allow_untagged);
-	mlxsw_reg_spaft_allow_prio_tagged_set(payload, true);
+	mlxsw_reg_spaft_allow_prio_tagged_set(payload, allow_untagged);
 	mlxsw_reg_spaft_allow_tagged_set(payload, true);
 }
 
Signature · 1 line
2.20.1
author maintainer
#34 lore raw

PATCH 34/91 ARM: davinci: da850-evm: call regulator_has_full_constraints()

In reply to Greg Kroah-Hartman

[ Upstream commit 0c0c9b5753cd04601b17de09da1ed2885a3b42fe ]

The BB expander at 0x21 i2c bus 1 fails to probe on da850-evm because the board doesn't set has_full_constraints to true in the regulator API.

Call regulator_has_full_constraints() at the end of board registration just like we do in da850-lcdk and da830-evm.

---
 arch/arm/mach-davinci/board-da850-evm.c | 2 ++
 1 file changed, 2 insertions(+)
arch/arm/mach-davinci/board-da850-evm.c +2 -0
index e1a949b47306..774a3e535ad0 100644
@@ -1472,6 +1472,8 @@ static __init void da850_evm_init(void)
 	if (ret)
 		pr_warn("%s: dsp/rproc registration failed: %d\n",
 			__func__, ret);
+
+	regulator_has_full_constraints();
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
Signature · 1 line
2.20.1
author maintainer
#35 lore raw

PATCH 35/91 ARM: davinci: da8xx: specify dma_coherent_mask for lcdc

In reply to Greg Kroah-Hartman

[ Upstream commit 68f2515bb31a664ba3e2bc1eb78dd9f529b10067 ]

The lcdc device is missing the dma_coherent_mask definition causing the following warning on da850-evm:

da8xx_lcdc da8xx_lcdc.0: found Sharp_LK043T1DG01 panel

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/dma/mapping.c:247 dma_alloc_attrs+0xc8/0x110
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.2.0-rc3-00077-g16d72dd4891f #18
Hardware name: DaVinci DA850/OMAP-L138/AM18x EVM
[<c000fce8>] (unwind_backtrace) from [<c000d900>] (show_stack+0x10/0x14)
[<c000d900>] (show_stack) from [<c001a4f8>] (__warn+0xec/0x114)
[<c001a4f8>] (__warn) from [<c001a634>] (warn_slowpath_null+0x3c/0x48)
[<c001a634>] (warn_slowpath_null) from [<c0065860>] (dma_alloc_attrs+0xc8/0x110)
[<c0065860>] (dma_alloc_attrs) from [<c02820f8>] (fb_probe+0x228/0x5a8)
[<c02820f8>] (fb_probe) from [<c02d3e9c>] (platform_drv_probe+0x48/0x9c)
[<c02d3e9c>] (platform_drv_probe) from [<c02d221c>] (really_probe+0x1d8/0x2d4)
[<c02d221c>] (really_probe) from [<c02d2474>] (driver_probe_device+0x5c/0x168)
[<c02d2474>] (driver_probe_device) from [<c02d2728>] (device_driver_attach+0x58/0x60)
[<c02d2728>] (device_driver_attach) from [<c02d27b0>] (__driver_attach+0x80/0xbc)
[<c02d27b0>] (__driver_attach) from [<c02d047c>] (bus_for_each_dev+0x64/0xb4)
[<c02d047c>] (bus_for_each_dev) from [<c02d1590>] (bus_add_driver+0xe4/0x1d8)
[<c02d1590>] (bus_add_driver) from [<c02d301c>] (driver_register+0x78/0x10c)
[<c02d301c>] (driver_register) from [<c000a5c0>] (do_one_initcall+0x48/0x1bc)
[<c000a5c0>] (do_one_initcall) from [<c05cae6c>] (kernel_init_freeable+0x10c/0x1d8)
[<c05cae6c>] (kernel_init_freeable) from [<c048a000>] (kernel_init+0x8/0xf4)
[<c048a000>] (kernel_init) from [<c00090e0>] (ret_from_fork+0x14/0x34)
Exception stack(0xc6837fb0 to 0xc6837ff8)
7fa0:                                     00000000 00000000 00000000 00000000
7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace 8a8073511be81dd2 ]---

Add a 32-bit mask to the platform device's definition.

---
 arch/arm/mach-davinci/devices-da8xx.c | 3 +++
 1 file changed, 3 insertions(+)
arch/arm/mach-davinci/devices-da8xx.c +3 -0
index 1fd3619f6a09..3c42bf9fa061 100644
@@ -685,6 +685,9 @@ static struct platform_device da8xx_lcdc_device = {
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(da8xx_lcdc_resources),
 	.resource	= da8xx_lcdc_resources,
+	.dev		= {
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	}
 };
 
 int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata)
Signature · 1 line
2.20.1
author maintainer
#36 lore raw

PATCH 36/91 mac80211: only warn once on chanctx_conf being NULL

In reply to Greg Kroah-Hartman

[ Upstream commit 563572340173865a9a356e6bb02579e6998a876d ]

In multiple SSID cases, it takes time to prepare every AP interface to be ready in initializing phase. If a sta already knows everything it needs to join one of the APs and sends authentication to the AP which is not fully prepared at this point of time, AP's channel context could be NULL. As a result, warning message occurs.

Even worse, if the AP is under attack via tools such as MDK3 and massive authentication requests are received in a very short time, console will be hung due to kernel warning messages.

WARN_ON_ONCE() could be a better way for indicating warning messages without duplicate messages to flood the console.

Johannes: We still need to address the underlying problem, but we
don't really have a good handle on it yet. Suppress the worst side-effects for now.

[johannes: add note, change subject]
---
 net/mac80211/ieee80211_i.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/mac80211/ieee80211_i.h +1 -1
index 35c6dfa13fa8..24f5ced630f5 100644
@@ -1410,7 +1410,7 @@ ieee80211_get_sband(struct ieee80211_sub_if_data *sdata)
 	rcu_read_lock();
 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
 
-	if (WARN_ON(!chanctx_conf)) {
+	if (WARN_ON_ONCE(!chanctx_conf)) {
 		rcu_read_unlock();
 		return NULL;
 	}
Signature · 1 line
2.20.1
author maintainer
#37 lore raw

PATCH 37/91 mac80211: do not start any work during reconfigure flow

In reply to Greg Kroah-Hartman

[ Upstream commit f8891461a277ec0afc493fd30cd975a38048a038 ]

It is not a good idea to try to perform any work (e.g. send an auth frame) during reconfigure flow.

Prevent this from happening, and at the end of the reconfigure flow requeue all the works.

---
 net/mac80211/ieee80211_i.h | 7 +++++++
 net/mac80211/util.c        | 4 ++++
 2 files changed, 11 insertions(+)
net/mac80211/ieee80211_i.h +7 -0
index 24f5ced630f5..cfd30671ccdf 100644
@@ -1998,6 +1998,13 @@ void __ieee80211_flush_queues(struct ieee80211_local *local,
 
 static inline bool ieee80211_can_run_worker(struct ieee80211_local *local)
 {
+	/*
+	 * It's unsafe to try to do any work during reconfigure flow.
+	 * When the flow ends the work will be requeued.
+	 */
+	if (local->in_reconfig)
+		return false;
+
 	/*
 	 * If quiescing is set, we are racing with __ieee80211_suspend.
 	 * __ieee80211_suspend flushes the workers after setting quiescing,
net/mac80211/util.c +4 -0
index 2558a34c9df1..c59638574cf8 100644
@@ -2224,6 +2224,10 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		mutex_lock(&local->mtx);
 		ieee80211_start_next_roc(local);
 		mutex_unlock(&local->mtx);
+
+		/* Requeue all works */
+		list_for_each_entry(sdata, &local->interfaces, list)
+			ieee80211_queue_work(&local->hw, &sdata->work);
 	}
 
 	ieee80211_wake_queues_by_reason(hw, IEEE80211_MAX_QUEUE_MAP,
Signature · 1 line
2.20.1
author maintainer
#38 lore raw

PATCH 38/91 bpf, devmap: Fix premature entry free on destroying map

In reply to Greg Kroah-Hartman

[ Upstream commit d4dd153d551634683fccf8881f606fa9f3dfa1ef ]

dev_map_free() waits for flush_needed bitmap to be empty in order to ensure all flush operations have completed before freeing its entries. However the corresponding clear_bit() was called before using the entries, so the entries could be used after free.

All access to the entries needs to be done before clearing the bit. It seems commit a5e2da6e9787 ("bpf: netdev is never null in __dev_map_flush") accidentally changed the clear_bit() and memory access order.

Note that the problem happens only in __dev_map_flush(), not in dev_map_flush_old(). dev_map_flush_old() is called only after nulling out the corresponding netdev_map entry, so dev_map_free() never frees the entry thus no such race happens there.

Fixes a5e2da6e9787 ("bpf: netdev is never null in __dev_map_flush")
---
 kernel/bpf/devmap.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/bpf/devmap.c +2 -2
index 2faad033715f..99353ac28cd4 100644
@@ -291,10 +291,10 @@ void __dev_map_flush(struct bpf_map *map)
 		if (unlikely(!dev))
 			continue;
 
-		__clear_bit(bit, bitmap);
-
 		bq = this_cpu_ptr(dev->bulkq);
 		bq_xmit_all(dev, bq, XDP_XMIT_FLUSH, true);
+
+		__clear_bit(bit, bitmap);
 	}
 }
 
Signature · 1 line
2.20.1
author maintainer
#39 lore raw

PATCH 39/91 bpf, devmap: Add missing bulk queue free

In reply to Greg Kroah-Hartman

[ Upstream commit edabf4d9dd905acd60048ea1579943801e3a4876 ]

dev_map_free() forgot to free bulk queue when freeing its entries.

Fixes 5d053f9da431 ("bpf: devmap prepare xdp frames for bulking")
---
 kernel/bpf/devmap.c | 1 +
 1 file changed, 1 insertion(+)
kernel/bpf/devmap.c +1 -0
index 99353ac28cd4..357d456d57b9 100644
@@ -186,6 +186,7 @@ static void dev_map_free(struct bpf_map *map)
 		if (!dev)
 			continue;
 
+		free_percpu(dev->bulkq);
 		dev_put(dev->dev);
 		kfree(dev);
 	}
Signature · 1 line
2.20.1
author maintainer
#40 lore raw

PATCH 40/91 bpf, devmap: Add missing RCU read lock on flush

In reply to Greg Kroah-Hartman

[ Upstream commit 86723c8640633bee4b4588d3c7784ee7a0032f65 ]

.ndo_xdp_xmit() assumes it is called under RCU. For example virtio_net uses RCU to detect it has setup the resources for tx. The assumption accidentally broke when introducing bulk queue in devmap.

Fixes 5d053f9da431 ("bpf: devmap prepare xdp frames for bulking")
---
 kernel/bpf/devmap.c | 4 ++++
 1 file changed, 4 insertions(+)
kernel/bpf/devmap.c +4 -0
index 357d456d57b9..fc500ca464d0 100644
@@ -282,6 +282,7 @@ void __dev_map_flush(struct bpf_map *map)
 	unsigned long *bitmap = this_cpu_ptr(dtab->flush_needed);
 	u32 bit;
 
+	rcu_read_lock();
 	for_each_set_bit(bit, bitmap, map->max_entries) {
 		struct bpf_dtab_netdev *dev = READ_ONCE(dtab->netdev_map[bit]);
 		struct xdp_bulk_queue *bq;
@@ -297,6 +298,7 @@ void __dev_map_flush(struct bpf_map *map)
 
 		__clear_bit(bit, bitmap);
 	}
+	rcu_read_unlock();
 }
 
 /* rcu_read_lock (from syscall and BPF contexts) ensures that if a delete and/or
@@ -389,6 +391,7 @@ static void dev_map_flush_old(struct bpf_dtab_netdev *dev)
 
 		int cpu;
 
+		rcu_read_lock();
 		for_each_online_cpu(cpu) {
 			bitmap = per_cpu_ptr(dev->dtab->flush_needed, cpu);
 			__clear_bit(dev->bit, bitmap);
@@ -396,6 +399,7 @@ static void dev_map_flush_old(struct bpf_dtab_netdev *dev)
 			bq = per_cpu_ptr(dev->bulkq, cpu);
 			bq_xmit_all(dev, bq, XDP_XMIT_FLUSH, false);
 		}
+		rcu_read_unlock();
 	}
 }
 
Signature · 1 line
2.20.1
author maintainer
#41 lore raw

PATCH 41/91 bpf, x64: fix stack layout of JITed bpf code

In reply to Greg Kroah-Hartman

[ Upstream commit fe8d9571dc50232b569242fac7ea6332a654f186 ]

Since commit 177366bf7ceb the %rbp stopped pointing to %rbp of the previous stack frame. That broke frame pointer based stack unwinding. This commit is a partial revert of it.
Note that the location of tail_call_cnt is fixed, since the verifier enforces MAX_BPF_STACK stack size for programs with tail calls.

Fixes 177366bf7ceb ("bpf: change x86 JITed program stack layout")
---
 arch/x86/net/bpf_jit_comp.c | 74 +++++++++++--------------------------
 1 file changed, 21 insertions(+), 53 deletions(-)
arch/x86/net/bpf_jit_comp.c +21 -53
index 2580cd2e98b1..a32fc3d99407 100644
@@ -190,9 +190,7 @@ struct jit_context {
 #define BPF_MAX_INSN_SIZE	128
 #define BPF_INSN_SAFETY		64
 
-#define AUX_STACK_SPACE		40 /* Space for RBX, R13, R14, R15, tailcnt */
-
-#define PROLOGUE_SIZE		37
+#define PROLOGUE_SIZE		20
 
 /*
  * Emit x86-64 prologue code for BPF program and check its size.
@@ -203,44 +201,19 @@ static void emit_prologue(u8 **pprog, u32 stack_depth, bool ebpf_from_cbpf)
 	u8 *prog = *pprog;
 	int cnt = 0;
 
-	/* push rbp */
-	EMIT1(0x55);
-
-	/* mov rbp,rsp */
-	EMIT3(0x48, 0x89, 0xE5);
-
-	/* sub rsp, rounded_stack_depth + AUX_STACK_SPACE */
-	EMIT3_off32(0x48, 0x81, 0xEC,
-		    round_up(stack_depth, 8) + AUX_STACK_SPACE);
-
-	/* sub rbp, AUX_STACK_SPACE */
-	EMIT4(0x48, 0x83, 0xED, AUX_STACK_SPACE);
-
-	/* mov qword ptr [rbp+0],rbx */
-	EMIT4(0x48, 0x89, 0x5D, 0);
-	/* mov qword ptr [rbp+8],r13 */
-	EMIT4(0x4C, 0x89, 0x6D, 8);
-	/* mov qword ptr [rbp+16],r14 */
-	EMIT4(0x4C, 0x89, 0x75, 16);
-	/* mov qword ptr [rbp+24],r15 */
-	EMIT4(0x4C, 0x89, 0x7D, 24);
-
+	EMIT1(0x55);             /* push rbp */
+	EMIT3(0x48, 0x89, 0xE5); /* mov rbp, rsp */
+	/* sub rsp, rounded_stack_depth */
+	EMIT3_off32(0x48, 0x81, 0xEC, round_up(stack_depth, 8));
+	EMIT1(0x53);             /* push rbx */
+	EMIT2(0x41, 0x55);       /* push r13 */
+	EMIT2(0x41, 0x56);       /* push r14 */
+	EMIT2(0x41, 0x57);       /* push r15 */
 	if (!ebpf_from_cbpf) {
-		/*
-		 * Clear the tail call counter (tail_call_cnt): for eBPF tail
-		 * calls we need to reset the counter to 0. It's done in two
-		 * instructions, resetting RAX register to 0, and moving it
-		 * to the counter location.
-		 */
-
-		/* xor eax, eax */
-		EMIT2(0x31, 0xc0);
-		/* mov qword ptr [rbp+32], rax */
-		EMIT4(0x48, 0x89, 0x45, 32);
-
+		/* zero init tail_call_cnt */
+		EMIT2(0x6a, 0x00);
 		BUILD_BUG_ON(cnt != PROLOGUE_SIZE);
 	}
-
 	*pprog = prog;
 }
 
@@ -285,13 +258,13 @@ static void emit_bpf_tail_call(u8 **pprog)
 	 * if (tail_call_cnt > MAX_TAIL_CALL_CNT)
 	 *	goto out;
 	 */
-	EMIT2_off32(0x8B, 0x85, 36);              /* mov eax, dword ptr [rbp + 36] */
+	EMIT2_off32(0x8B, 0x85, -36 - MAX_BPF_STACK); /* mov eax, dword ptr [rbp - 548] */
 	EMIT3(0x83, 0xF8, MAX_TAIL_CALL_CNT);     /* cmp eax, MAX_TAIL_CALL_CNT */
 #define OFFSET2 (30 + RETPOLINE_RAX_BPF_JIT_SIZE)
 	EMIT2(X86_JA, OFFSET2);                   /* ja out */
 	label2 = cnt;
 	EMIT3(0x83, 0xC0, 0x01);                  /* add eax, 1 */
-	EMIT2_off32(0x89, 0x85, 36);              /* mov dword ptr [rbp + 36], eax */
+	EMIT2_off32(0x89, 0x85, -36 - MAX_BPF_STACK); /* mov dword ptr [rbp -548], eax */
 
 	/* prog = array->ptrs[index]; */
 	EMIT4_off32(0x48, 0x8B, 0x84, 0xD6,       /* mov rax, [rsi + rdx * 8 + offsetof(...)] */
@@ -1006,19 +979,14 @@ xadd:			if (is_imm8(insn->off))
 			seen_exit = true;
 			/* Update cleanup_addr */
 			ctx->cleanup_addr = proglen;
-			/* mov rbx, qword ptr [rbp+0] */
-			EMIT4(0x48, 0x8B, 0x5D, 0);
-			/* mov r13, qword ptr [rbp+8] */
-			EMIT4(0x4C, 0x8B, 0x6D, 8);
-			/* mov r14, qword ptr [rbp+16] */
-			EMIT4(0x4C, 0x8B, 0x75, 16);
-			/* mov r15, qword ptr [rbp+24] */
-			EMIT4(0x4C, 0x8B, 0x7D, 24);
-
-			/* add rbp, AUX_STACK_SPACE */
-			EMIT4(0x48, 0x83, 0xC5, AUX_STACK_SPACE);
-			EMIT1(0xC9); /* leave */
-			EMIT1(0xC3); /* ret */
+			if (!bpf_prog_was_classic(bpf_prog))
+				EMIT1(0x5B); /* get rid of tail_call_cnt */
+			EMIT2(0x41, 0x5F);   /* pop r15 */
+			EMIT2(0x41, 0x5E);   /* pop r14 */
+			EMIT2(0x41, 0x5D);   /* pop r13 */
+			EMIT1(0x5B);         /* pop rbx */
+			EMIT1(0xC9);         /* leave */
+			EMIT1(0xC3);         /* ret */
 			break;
 
 		default:
Signature · 1 line
2.20.1
author maintainer
#42 lore raw

PATCH 42/91 qmi_wwan: add support for QMAP padding in the RX path

In reply to Greg Kroah-Hartman

[ Upstream commit 61356088ace1866a847a727d4d40da7bf00b67fc ]

The QMAP code in the qmi_wwan driver is based on the CodeAurora GobiNet driver which does not process QMAP padding in the RX path correctly. Add support for QMAP padding to qmimux_rx_fixup() according to the description of the rmnet driver.

Fixes c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc Daniele Palmas <[email protected]>
---
 drivers/net/usb/qmi_wwan.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/net/usb/qmi_wwan.c +9 -3
index e657d8947125..090227118d3d 100644
@@ -153,7 +153,7 @@ static bool qmimux_has_slaves(struct usbnet *dev)
 
 static int qmimux_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 {
-	unsigned int len, offset = 0;
+	unsigned int len, offset = 0, pad_len, pkt_len;
 	struct qmimux_hdr *hdr;
 	struct net_device *net;
 	struct sk_buff *skbn;
@@ -171,10 +171,16 @@ static int qmimux_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 		if (hdr->pad & 0x80)
 			goto skip;
 
+		/* extract padding length and check for valid length info */
+		pad_len = hdr->pad & 0x3f;
+		if (len == 0 || pad_len >= len)
+			goto skip;
+		pkt_len = len - pad_len;
+
 		net = qmimux_find_dev(dev, hdr->mux_id);
 		if (!net)
 			goto skip;
-		skbn = netdev_alloc_skb(net, len);
+		skbn = netdev_alloc_skb(net, pkt_len);
 		if (!skbn)
 			return 0;
 		skbn->dev = net;
@@ -191,7 +197,7 @@ static int qmimux_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 			goto skip;
 		}
 
-		skb_put_data(skbn, skb->data + offset + qmimux_hdr_sz, len);
+		skb_put_data(skbn, skb->data + offset + qmimux_hdr_sz, pkt_len);
 		if (netif_rx(skbn) != NET_RX_SUCCESS)
 			return 0;
 
Signature · 1 line
2.20.1
author maintainer
#43 lore raw

PATCH 43/91 qmi_wwan: avoid RCU stalls on device disconnect when in QMAP mode

In reply to Greg Kroah-Hartman

[ Upstream commit a8fdde1cb830e560208af42b6c10750137f53eb3 ]

Switch qmimux_unregister_device() and qmi_wwan_disconnect() to use unregister_netdevice_queue() and unregister_netdevice_many() instead of unregister_netdevice(). This avoids RCU stalls which have been observed on device disconnect in certain setups otherwise.

Fixes c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc Daniele Palmas <[email protected]>
---
 drivers/net/usb/qmi_wwan.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
drivers/net/usb/qmi_wwan.c +7 -4
index 090227118d3d..44ada5c38756 100644
@@ -247,13 +247,14 @@ static int qmimux_register_device(struct net_device *real_dev, u8 mux_id)
 	return err;
 }
 
-static void qmimux_unregister_device(struct net_device *dev)
+static void qmimux_unregister_device(struct net_device *dev,
+				     struct list_head *head)
 {
 	struct qmimux_priv *priv = netdev_priv(dev);
 	struct net_device *real_dev = priv->real_dev;
 
 	netdev_upper_dev_unlink(real_dev, dev);
-	unregister_netdevice(dev);
+	unregister_netdevice_queue(dev, head);
 
 	/* Get rid of the reference to real_dev */
 	dev_put(real_dev);
@@ -424,7 +425,7 @@ static ssize_t del_mux_store(struct device *d,  struct device_attribute *attr, c
 		ret = -EINVAL;
 		goto err;
 	}
-	qmimux_unregister_device(del_dev);
+	qmimux_unregister_device(del_dev, NULL);
 
 	if (!qmimux_has_slaves(dev))
 		info->flags &= ~QMI_WWAN_FLAG_MUX;
@@ -1434,6 +1435,7 @@ static void qmi_wwan_disconnect(struct usb_interface *intf)
 	struct qmi_wwan_state *info;
 	struct list_head *iter;
 	struct net_device *ldev;
+	LIST_HEAD(list);
 
 	/* called twice if separate control and data intf */
 	if (!dev)
@@ -1446,8 +1448,9 @@ static void qmi_wwan_disconnect(struct usb_interface *intf)
 		}
 		rcu_read_lock();
 		netdev_for_each_upper_dev_rcu(dev->net, ldev, iter)
-			qmimux_unregister_device(ldev);
+			qmimux_unregister_device(ldev, &list);
 		rcu_read_unlock();
+		unregister_netdevice_many(&list);
 		rtnl_unlock();
 		info->flags &= ~QMI_WWAN_FLAG_MUX;
 	}
Signature · 1 line
2.20.1
author maintainer
#44 lore raw

PATCH 44/91 qmi_wwan: extend permitted QMAP mux_id value range

In reply to Greg Kroah-Hartman

[ Upstream commit 36815b416fa48766ac5a98e4b2dc3ebc5887222e ]

Permit mux_id values up to 254 to be used in qmimux_register_device() for compatibility with ip(8) and the rmnet driver.

Fixes c6adf77953bc ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc Daniele Palmas <[email protected]>
---
 Documentation/ABI/testing/sysfs-class-net-qmi | 4 ++--
 drivers/net/usb/qmi_wwan.c                    | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)
Documentation/ABI/testing/sysfs-class-net-qmi +2 -2
index 7122d6264c49..c310db4ccbc2 100644
@@ -29,7 +29,7 @@ Contact:	Bjørn Mork <[email protected]>
 Description:
 		Unsigned integer.
 
-		Write a number ranging from 1 to 127 to add a qmap mux
+		Write a number ranging from 1 to 254 to add a qmap mux
 		based network device, supported by recent Qualcomm based
 		modems.
 
@@ -46,5 +46,5 @@ Contact:	Bjørn Mork <[email protected]>
 Description:
 		Unsigned integer.
 
-		Write a number ranging from 1 to 127 to delete a previously
+		Write a number ranging from 1 to 254 to delete a previously
 		created qmap mux based network device.
drivers/net/usb/qmi_wwan.c +2 -2
index 44ada5c38756..128c8a327d8e 100644
@@ -363,8 +363,8 @@ static ssize_t add_mux_store(struct device *d,  struct device_attribute *attr, c
 	if (kstrtou8(buf, 0, &mux_id))
 		return -EINVAL;
 
-	/* mux_id [1 - 0x7f] range empirically found */
-	if (mux_id < 1 || mux_id > 0x7f)
+	/* mux_id [1 - 254] for compatibility with ip(8) and the rmnet driver */
+	if (mux_id < 1 || mux_id > 254)
 		return -EINVAL;
 
 	if (!rtnl_trylock())
Signature · 1 line
2.20.1
author maintainer
#45 lore raw

PATCH 45/91 mmc: core: complete HS400 before checking status

In reply to Greg Kroah-Hartman

[ Upstream commit b0e370b95a3b231d0fb5d1958cce85ef57196fe6 ]

We don't have a reproducible error case, yet our BSP team suggested that the mmc_switch_status() command in mmc_select_hs400() should come after the callback into the driver completing HS400 setup. It makes sense to me because we want the status of a fully setup HS400, so it will increase the reliability of the mmc_switch_status() command.

Fixes ba6c7ac3a2f4 ("mmc: core: more fine-grained hooks for HS400 tuning")
---
 drivers/mmc/core/mmc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/mmc/core/mmc.c +3 -3
index 55997cf84b39..f1fe446eee66 100644
@@ -1209,13 +1209,13 @@ static int mmc_select_hs400(struct mmc_card *card)
 	mmc_set_timing(host, MMC_TIMING_MMC_HS400);
 	mmc_set_bus_speed(card);
 
+	if (host->ops->hs400_complete)
+		host->ops->hs400_complete(host);
+
 	err = mmc_switch_status(card);
 	if (err)
 		goto out_err;
 
-	if (host->ops->hs400_complete)
-		host->ops->hs400_complete(host);
-
 	return 0;
 
 out_err:
Signature · 1 line
2.20.1
author maintainer
#46 lore raw

PATCH 46/91 md: fix for divide error in status_resync

In reply to Greg Kroah-Hartman

[ Upstream commit 9642fa73d073527b0cbc337cc17a47d545d82cd2 ]

Stopping external metadata arrays during resync/recovery causes retries, loop of interrupting and starting reconstruction, until it hit at good moment to stop completely. While these retries curr_mark_cnt can be small- especially on HDD drives, so subtraction result can be smaller than 0. However it is casted to uint without checking. As a result of it the status bar in /proc/mdstat while stopping is strange (it jumps between 0% and 99%).

The real problem occurs here after commit 72deb455b5ec ("block: remove CONFIG_LBDAF"). Sector_div() macro has been changed, now the divisor is casted to uint32. For db = -8 the divisior(db/32-1) becomes 0.

Check if db value can be really counted and replace these macro by div64_u64() inline.

---
 drivers/md/md.c | 36 ++++++++++++++++++++++--------------
 1 file changed, 22 insertions(+), 14 deletions(-)
drivers/md/md.c +22 -14
index b924f62e2cd5..fb5d702e43b5 100644
@@ -7625,9 +7625,9 @@ static void status_unused(struct seq_file *seq)
 static int status_resync(struct seq_file *seq, struct mddev *mddev)
 {
 	sector_t max_sectors, resync, res;
-	unsigned long dt, db;
-	sector_t rt;
-	int scale;
+	unsigned long dt, db = 0;
+	sector_t rt, curr_mark_cnt, resync_mark_cnt;
+	int scale, recovery_active;
 	unsigned int per_milli;
 
 	if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ||
@@ -7716,22 +7716,30 @@ static int status_resync(struct seq_file *seq, struct mddev *mddev)
 	 * db: blocks written from mark until now
 	 * rt: remaining time
 	 *
-	 * rt is a sector_t, so could be 32bit or 64bit.
-	 * So we divide before multiply in case it is 32bit and close
-	 * to the limit.
-	 * We scale the divisor (db) by 32 to avoid losing precision
-	 * near the end of resync when the number of remaining sectors
-	 * is close to 'db'.
-	 * We then divide rt by 32 after multiplying by db to compensate.
-	 * The '+1' avoids division by zero if db is very small.
+	 * rt is a sector_t, which is always 64bit now. We are keeping
+	 * the original algorithm, but it is not really necessary.
+	 *
+	 * Original algorithm:
+	 *   So we divide before multiply in case it is 32bit and close
+	 *   to the limit.
+	 *   We scale the divisor (db) by 32 to avoid losing precision
+	 *   near the end of resync when the number of remaining sectors
+	 *   is close to 'db'.
+	 *   We then divide rt by 32 after multiplying by db to compensate.
+	 *   The '+1' avoids division by zero if db is very small.
 	 */
 	dt = ((jiffies - mddev->resync_mark) / HZ);
 	if (!dt) dt++;
-	db = (mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active))
-		- mddev->resync_mark_cnt;
+
+	curr_mark_cnt = mddev->curr_mark_cnt;
+	recovery_active = atomic_read(&mddev->recovery_active);
+	resync_mark_cnt = mddev->resync_mark_cnt;
+
+	if (curr_mark_cnt >= (recovery_active + resync_mark_cnt))
+		db = curr_mark_cnt - (recovery_active + resync_mark_cnt);
 
 	rt = max_sectors - resync;    /* number of remaining sectors */
-	sector_div(rt, db/32+1);
+	rt = div64_u64(rt, db/32+1);
 	rt *= dt;
 	rt >>= 5;
 
Signature · 1 line
2.20.1
author maintainer
#47 lore raw

PATCH 47/91 bnx2x: Check if transceiver implements DDM before access

In reply to Greg Kroah-Hartman

[ Upstream commit cf18cecca911c0db96b868072665347efe6df46f ]

Some transceivers may comply with SFF-8472 even though they do not implement the Digital Diagnostic Monitoring (DDM) interface described in the spec. The existence of such area is specified by the 6th bit of byte 92, set to 1 if implemented.

Currently, without checking this bit, bnx2x fails trying to read sfp module's EEPROM with the follow message:

ethtool -m enP5p1s0f1
Cannot get Module EEPROM data: Input/output error

Because it fails to read the additional 256 bytes in which it is assumed to exist the DDM data.

This issue was noticed using a Mellanox Passive DAC PN 01FT738. The EEPROM data was confirmed by Mellanox as correct and similar to other Passive DACs from other manufacturers.

---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 3 ++-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h    | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)
drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +2 -1
index a4a90b6cdb46..c428b0655c26 100644
@@ -1581,7 +1581,8 @@ static int bnx2x_get_module_info(struct net_device *dev,
 	}
 
 	if (!sff8472_comp ||
-	    (diag_type & SFP_EEPROM_DIAG_ADDR_CHANGE_REQ)) {
+	    (diag_type & SFP_EEPROM_DIAG_ADDR_CHANGE_REQ) ||
+	    !(diag_type & SFP_EEPROM_DDM_IMPLEMENTED)) {
 		modinfo->type = ETH_MODULE_SFF_8079;
 		modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
 	} else {
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h +1 -0
index b7d251108c19..7115f5025664 100644
@@ -62,6 +62,7 @@
 #define SFP_EEPROM_DIAG_TYPE_ADDR		0x5c
 #define SFP_EEPROM_DIAG_TYPE_SIZE		1
 #define SFP_EEPROM_DIAG_ADDR_CHANGE_REQ		(1<<2)
+#define SFP_EEPROM_DDM_IMPLEMENTED		(1<<6)
 #define SFP_EEPROM_SFF_8472_COMP_ADDR		0x5e
 #define SFP_EEPROM_SFF_8472_COMP_SIZE		1
 
Signature · 1 line
2.20.1
author maintainer
#48 lore raw

PATCH 48/91 drm: return -EFAULT if copy_to_user() fails

In reply to Greg Kroah-Hartman

[ Upstream commit 74b67efa8d7b4f90137f0ab9a80dd319da050350 ]

The copy_from_user() function returns the number of bytes remaining to be copied but we want to return a negative error code. Otherwise the callers treat it as a successful copy.

---
 drivers/gpu/drm/drm_bufs.c  | 5 ++++-
 drivers/gpu/drm/drm_ioc32.c | 5 ++++-
 2 files changed, 8 insertions(+), 2 deletions(-)
drivers/gpu/drm/drm_bufs.c +4 -1
index e2f775d1c112..21bec4548092 100644
@@ -1321,7 +1321,10 @@ static int copy_one_buf(void *data, int count, struct drm_buf_entry *from)
 				 .size = from->buf_size,
 				 .low_mark = from->low_mark,
 				 .high_mark = from->high_mark};
-	return copy_to_user(to, &v, offsetof(struct drm_buf_desc, flags));
+
+	if (copy_to_user(to, &v, offsetof(struct drm_buf_desc, flags)))
+		return -EFAULT;
+	return 0;
 }
 
 int drm_legacy_infobufs(struct drm_device *dev, void *data,
drivers/gpu/drm/drm_ioc32.c +4 -1
index 67b1fca39aa6..138680b37c70 100644
@@ -372,7 +372,10 @@ static int copy_one_buf32(void *data, int count, struct drm_buf_entry *from)
 			      .size = from->buf_size,
 			      .low_mark = from->low_mark,
 			      .high_mark = from->high_mark};
-	return copy_to_user(to + count, &v, offsetof(drm_buf_desc32_t, flags));
+
+	if (copy_to_user(to + count, &v, offsetof(drm_buf_desc32_t, flags)))
+		return -EFAULT;
+	return 0;
 }
 
 static int drm_legacy_infobufs32(struct drm_device *dev, void *data,
Signature · 1 line
2.20.1
author maintainer
#49 lore raw

PATCH 49/91 ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL

In reply to Greg Kroah-Hartman

[ Upstream commit 6f6a8622057c92408930c31698394fae1557b188 ]

A similar fix to Patch "ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL" is also needed by ip6_tunnel.

---
 include/net/ip6_tunnel.h | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
include/net/ip6_tunnel.h +6 -3
index 236e40ba06bf..f594eb71c274 100644
@@ -156,9 +156,12 @@ static inline void ip6tunnel_xmit(struct sock *sk, struct sk_buff *skb,
 	memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
 	pkt_len = skb->len - skb_inner_network_offset(skb);
 	err = ip6_local_out(dev_net(skb_dst(skb)->dev), sk, skb);
-	if (unlikely(net_xmit_eval(err)))
-		pkt_len = -1;
-	iptunnel_xmit_stats(dev, pkt_len);
+
+	if (dev) {
+		if (unlikely(net_xmit_eval(err)))
+			pkt_len = -1;
+		iptunnel_xmit_stats(dev, pkt_len);
+	}
 }
 #endif
 #endif
Signature · 1 line
2.20.1
author maintainer
#50 lore raw

PATCH 50/91 net: lio_core: fix potential sign-extension overflow on large shift

In reply to Greg Kroah-Hartman

[ Upstream commit 9476274093a0e79b905f4cd6cf6d149f65e02c17 ]

Left shifting the signed int value 1 by 31 bits has undefined behaviour and the shift amount oq_no can be as much as 63. Fix this by using BIT_ULL(oq_no) instead.

Addresses-Coverity: ("Bad shift operation")

Fixes f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters")
---
 drivers/net/ethernet/cavium/liquidio/lio_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/cavium/liquidio/lio_core.c +1 -1
index 8093c5eafea2..781814835a4f 100644
@@ -985,7 +985,7 @@ static void liquidio_schedule_droq_pkt_handlers(struct octeon_device *oct)
 
 			if (droq->ops.poll_mode) {
 				droq->ops.napi_fn(droq);
-				oct_priv->napi_mask |= (1 << oq_no);
+				oct_priv->napi_mask |= BIT_ULL(oq_no);
 			} else {
 				tasklet_schedule(&oct_priv->droq_tasklet);
 			}
Signature · 1 line
2.20.1
author maintainer
#51 lore raw

PATCH 51/91 scsi: qedi: Check targetname while finding boot target information

In reply to Greg Kroah-Hartman

[ Upstream commit 1ac3549ed58cdfdaf43bbf31ac260e2381cc0dae ]

The kernel panic was observed during iSCSI discovery via offload with below call trace,

[ 2115.646901] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 2115.646909] IP: [<ffffffffacf7f0cc>] strncmp+0xc/0x60
[ 2115.646927] PGD 0
[ 2115.646932] Oops: 0000 [#1] SMP
[ 2115.647107] CPU: 24 PID: 264 Comm: kworker/24:1 Kdump: loaded Tainted: G
               OE  ------------   3.10.0-957.el7.x86_64 #1
[ 2115.647133] Workqueue: slowpath-13:00. qed_slowpath_task [qed]
[ 2115.647135] task: ffff8d66af80b0c0 ti: ffff8d66afb80000 task.ti: ffff8d66afb80000
[ 2115.647136] RIP: 0010:[<ffffffffacf7f0cc>]  [<ffffffffacf7f0cc>] strncmp+0xc/0x60
[ 2115.647141] RSP: 0018:ffff8d66afb83c68  EFLAGS: 00010206
[ 2115.647143] RAX: 0000000000000001 RBX: 0000000000000007 RCX: 000000000000000a
[ 2115.647144] RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffff8d632b3ba040
[ 2115.647145] RBP: ffff8d66afb83c68 R08: 0000000000000000 R09: 000000000000ffff
[ 2115.647147] R10: 0000000000000007 R11: 0000000000000800 R12: ffff8d66a30007a0
[ 2115.647148] R13: ffff8d66747a3c10 R14: ffff8d632b3ba000 R15: ffff8d66747a32f8
[ 2115.647149] FS:  0000000000000000(0000) GS:ffff8d66aff00000(0000) knlGS:0000000000000000
[ 2115.647151] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2115.647152] CR2: 0000000000000000 CR3: 0000000509610000 CR4: 00000000007607e0
[ 2115.647153] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2115.647154] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2115.647155] PKRU: 00000000
[ 2115.647157] Call Trace:
[ 2115.647165]  [<ffffffffc0634cc5>] qedi_get_protocol_tlv_data+0x2c5/0x510 [qedi]
[ 2115.647184]  [<ffffffffc05968f5>] ? qed_mfw_process_tlv_req+0x245/0xbe0 [qed]
[ 2115.647195]  [<ffffffffc05496cb>] qed_mfw_fill_tlv_data+0x4b/0xb0 [qed]
[ 2115.647206]  [<ffffffffc0596911>] qed_mfw_process_tlv_req+0x261/0xbe0 [qed]
[ 2115.647215]  [<ffffffffacce0e8e>] ? dequeue_task_fair+0x41e/0x660
[ 2115.647221]  [<ffffffffacc2a59e>] ? __switch_to+0xce/0x580
[ 2115.647230]  [<ffffffffc0546013>] qed_slowpath_task+0xa3/0x160 [qed]
[ 2115.647278] RIP  [<ffffffffacf7f0cc>] strncmp+0xc/0x60

Fix kernel panic by validating the session targetname before providing TLV data and confirming the presence of boot targets.

---
 drivers/scsi/qedi/qedi_main.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/scsi/qedi/qedi_main.c +3 -0
index 4de740da547b..763c7628356b 100644
@@ -955,6 +955,9 @@ static int qedi_find_boot_info(struct qedi_ctx *qedi,
 		if (!iscsi_is_session_online(cls_sess))
 			continue;
 
+		if (!sess->targetname)
+			continue;
+
 		if (pri_ctrl_flags) {
 			if (!strcmp(pri_tgt->iscsi_name, sess->targetname) &&
 			    !strcmp(pri_tgt->ip_addr, ep_ip_addr)) {
Signature · 1 line
2.20.1
author maintainer
#52 lore raw

PATCH 52/91 quota: fix a problem about transfer quota

In reply to Greg Kroah-Hartman

[ Upstream commit c6d9c35d16f1bafd3fec64b865e569e48cbcb514 ]

Run below script as root, dquot_add_space will return -EDQUOT since __dquot_transfer call dquot_add_space with flags=0, and dquot_add_space think it's a preallocation. Fix it by set flags as DQUOT_SPACE_WARN.

mkfs.ext4 -O quota,project /dev/vdb mount -o prjquota /dev/vdb /mnt
setquota -P 23 1 1 0 0 /dev/vdb
dd if=/dev/zero of=/mnt/test-file bs=4K count=1 chattr -p 23 test-file

Fixes 7b9ca4c61bc2 ("quota: Reduce contention on dq_data_lock")
---
 fs/quota/dquot.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
fs/quota/dquot.c +2 -2
index fc20e06c56ba..dd1783ea7003 100644
@@ -1993,8 +1993,8 @@ int __dquot_transfer(struct inode *inode, struct dquot **transfer_to)
 				       &warn_to[cnt]);
 		if (ret)
 			goto over_quota;
-		ret = dquot_add_space(transfer_to[cnt], cur_space, rsv_space, 0,
-				      &warn_to[cnt]);
+		ret = dquot_add_space(transfer_to[cnt], cur_space, rsv_space,
+				      DQUOT_SPACE_WARN, &warn_to[cnt]);
 		if (ret) {
 			spin_lock(&transfer_to[cnt]->dq_dqb_lock);
 			dquot_decr_inodes(transfer_to[cnt], inode_usage);
Signature · 1 line
2.20.1
author maintainer
#53 lore raw

PATCH 53/91 net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()

In reply to Greg Kroah-Hartman

[ Upstream commit 48620e341659f6e4b978ec229f6944dabe6df709 ]

The comment is correct, but the code ends up moving the bits four places too far, into the VTUOp field.

Fixes 11ea809f1a74 (net: dsa: mv88e6xxx: support 256 databases)
---
 drivers/net/dsa/mv88e6xxx/global1_vtu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/dsa/mv88e6xxx/global1_vtu.c +1 -1
index 058326924f3e..7a6667e0b9f9 100644
@@ -419,7 +419,7 @@ int mv88e6185_g1_vtu_loadpurge(struct mv88e6xxx_chip *chip,
 		 * VTU DBNum[7:4] are located in VTU Operation 11:8
 		 */
 		op |= entry->fid & 0x000f;
-		op |= (entry->fid & 0x00f0) << 8;
+		op |= (entry->fid & 0x00f0) << 4;
 	}
 
 	return mv88e6xxx_g1_vtu_op(chip, op);
Signature · 1 line
2.20.1
author maintainer
#54 lore raw

PATCH 54/91 NFS4: Only set creation opendata if O_CREAT

In reply to Greg Kroah-Hartman

[ Upstream commit 909105199a682cb09c500acd443d34b182846c9c ]

We can end up in nfs4_opendata_alloc during task exit, in which case current->fs has already been cleaned up. This leads to a crash in current_umask().

Fix this by only setting creation opendata if we are actually doing an open with O_CREAT. We can drop the check for NULL nfs4_open_createattrs, since O_CREAT will never be set for the recovery path.

---
 fs/nfs/nfs4proc.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)
fs/nfs/nfs4proc.c +11 -9
index 53cf8599a46e..1de855e0ae61 100644
@@ -1243,10 +1243,20 @@ static struct nfs4_opendata *nfs4_opendata_alloc(struct dentry *dentry,
 	atomic_inc(&sp->so_count);
 	p->o_arg.open_flags = flags;
 	p->o_arg.fmode = fmode & (FMODE_READ|FMODE_WRITE);
-	p->o_arg.umask = current_umask();
 	p->o_arg.claim = nfs4_map_atomic_open_claim(server, claim);
 	p->o_arg.share_access = nfs4_map_atomic_open_share(server,
 			fmode, flags);
+	if (flags & O_CREAT) {
+		p->o_arg.umask = current_umask();
+		p->o_arg.label = nfs4_label_copy(p->a_label, label);
+		if (c->sattr != NULL && c->sattr->ia_valid != 0) {
+			p->o_arg.u.attrs = &p->attrs;
+			memcpy(&p->attrs, c->sattr, sizeof(p->attrs));
+
+			memcpy(p->o_arg.u.verifier.data, c->verf,
+					sizeof(p->o_arg.u.verifier.data));
+		}
+	}
 	/* don't put an ACCESS op in OPEN compound if O_EXCL, because ACCESS
 	 * will return permission denied for all bits until close */
 	if (!(flags & O_EXCL)) {
@@ -1270,7 +1280,6 @@ static struct nfs4_opendata *nfs4_opendata_alloc(struct dentry *dentry,
 	p->o_arg.server = server;
 	p->o_arg.bitmask = nfs4_bitmask(server, label);
 	p->o_arg.open_bitmap = &nfs4_fattr_bitmap[0];
-	p->o_arg.label = nfs4_label_copy(p->a_label, label);
 	switch (p->o_arg.claim) {
 	case NFS4_OPEN_CLAIM_NULL:
 	case NFS4_OPEN_CLAIM_DELEGATE_CUR:
@@ -1283,13 +1292,6 @@ static struct nfs4_opendata *nfs4_opendata_alloc(struct dentry *dentry,
 	case NFS4_OPEN_CLAIM_DELEG_PREV_FH:
 		p->o_arg.fh = NFS_FH(d_inode(dentry));
 	}
-	if (c != NULL && c->sattr != NULL && c->sattr->ia_valid != 0) {
-		p->o_arg.u.attrs = &p->attrs;
-		memcpy(&p->attrs, c->sattr, sizeof(p->attrs));
-
-		memcpy(p->o_arg.u.verifier.data, c->verf,
-				sizeof(p->o_arg.u.verifier.data));
-	}
 	p->c_arg.fh = &p->o_res.fh;
 	p->c_arg.stateid = &p->o_res.stateid;
 	p->c_arg.seqid = p->o_arg.seqid;
Signature · 1 line
2.20.1
author maintainer
#55 lore raw

PATCH 55/91 net :sunrpc :clnt :Fix xps refcount imbalance on the error path

In reply to Greg Kroah-Hartman

[ Upstream commit b96226148491505318228ac52624956bd98f9e0c ]

rpc_clnt_add_xprt take a reference to struct rpc_xprt_switch, but forget to release it before return, may lead to a memory leak.

---
 net/sunrpc/clnt.c | 1 +
 1 file changed, 1 insertion(+)
net/sunrpc/clnt.c +1 -0
index 7e4553dbc3c7..0d7d149b1b1b 100644
@@ -2713,6 +2713,7 @@ int rpc_clnt_add_xprt(struct rpc_clnt *clnt,
 	xprt = xprt_iter_xprt(&clnt->cl_xpi);
 	if (xps == NULL || xprt == NULL) {
 		rcu_read_unlock();
+		xprt_switch_put(xps);
 		return -EAGAIN;
 	}
 	resvport = xprt->resvport;
Signature · 1 line
2.20.1
author maintainer
#56 lore raw

PATCH 56/91 fscrypt: dont set policy for a dead directory

In reply to Greg Kroah-Hartman

From: Hongjie Fang <[email protected]>

commit 5858bdad4d0d0fc18bf29f34c3ac836e0b59441f upstream.

The directory may have been removed when entering fscrypt_ioctl_set_policy(). If so, the empty_dir() check will return error for ext4 file system.

ext4_rmdir() sets i_size = 0, then ext4_empty_dir() reports an error because 'inode->i_size < EXT4_DIR_REC_LEN(1) + EXT4_DIR_REC_LEN(2)'. If the fs is mounted with errors=panic, it will trigger a panic issue.

Add the check IS_DEADDIR() to fix this problem.

Fixes 9bd8212f981e ("ext4 crypto: add encryption policy and password salt support")
Cc <[email protected]> # v4.1+
---
 fs/crypto/policy.c |    2 ++
 1 file changed, 2 insertions(+)
fs/crypto/policy.c +2 -0
@@ -81,6 +81,8 @@ int fscrypt_ioctl_set_policy(struct file
 	if (ret == -ENODATA) {
 		if (!S_ISDIR(inode->i_mode))
 			ret = -ENOTDIR;
+		else if (IS_DEADDIR(inode))
+			ret = -ENOENT;
 		else if (!inode->i_sb->s_cop->empty_dir(inode))
 			ret = -ENOTEMPTY;
 		else
author maintainer
#57 lore raw

PATCH 57/91 udf: Fix incorrect final NOT_ALLOCATED (hole) extent length

In reply to Greg Kroah-Hartman

From: Steven J. Magnani <[email protected]>

commit fa33cdbf3eceb0206a4f844fe91aeebcf6ff2b7a upstream.

In some cases, using the 'truncate' command to extend a UDF file results in a mismatch between the length of the file's extents (specifically, due to incorrect length of the final NOT_ALLOCATED extent) and the information (file) length. The discrepancy can prevent other operating systems (i.e., Windows 10) from opening the file.

Two particular errors have been observed when extending a file:

1. The final extent is larger than it should be, having been rounded up to a multiple of the block size.

B. The final extent is not shorter than it should be, due to not having
been updated when the file's information length was increased.

[JK: simplified udf_do_extend_final_block(), fixed up some types]

---
 fs/udf/inode.c |   93 ++++++++++++++++++++++++++++++++++++---------------------
 1 file changed, 60 insertions(+), 33 deletions(-)
fs/udf/inode.c +60 -33
@@ -470,13 +470,15 @@ static struct buffer_head *udf_getblk(st
 	return NULL;
 }
 
-/* Extend the file by 'blocks' blocks, return the number of extents added */
+/* Extend the file with new blocks totaling 'new_block_bytes',
+ * return the number of extents added
+ */
 static int udf_do_extend_file(struct inode *inode,
 			      struct extent_position *last_pos,
 			      struct kernel_long_ad *last_ext,
-			      sector_t blocks)
+			      loff_t new_block_bytes)
 {
-	sector_t add;
+	uint32_t add;
 	int count = 0, fake = !(last_ext->extLength & UDF_EXTENT_LENGTH_MASK);
 	struct super_block *sb = inode->i_sb;
 	struct kernel_lb_addr prealloc_loc = {};
@@ -486,7 +488,7 @@ static int udf_do_extend_file(struct ino
 
 	/* The previous extent is fake and we should not extend by anything
 	 * - there's nothing to do... */
-	if (!blocks && fake)
+	if (!new_block_bytes && fake)
 		return 0;
 
 	iinfo = UDF_I(inode);
@@ -517,13 +519,12 @@ static int udf_do_extend_file(struct ino
 	/* Can we merge with the previous extent? */
 	if ((last_ext->extLength & UDF_EXTENT_FLAG_MASK) ==
 					EXT_NOT_RECORDED_NOT_ALLOCATED) {
-		add = ((1 << 30) - sb->s_blocksize -
-			(last_ext->extLength & UDF_EXTENT_LENGTH_MASK)) >>
-			sb->s_blocksize_bits;
-		if (add > blocks)
-			add = blocks;
-		blocks -= add;
-		last_ext->extLength += add << sb->s_blocksize_bits;
+		add = (1 << 30) - sb->s_blocksize -
+			(last_ext->extLength & UDF_EXTENT_LENGTH_MASK);
+		if (add > new_block_bytes)
+			add = new_block_bytes;
+		new_block_bytes -= add;
+		last_ext->extLength += add;
 	}
 
 	if (fake) {
@@ -544,28 +545,27 @@ static int udf_do_extend_file(struct ino
 	}
 
 	/* Managed to do everything necessary? */
-	if (!blocks)
+	if (!new_block_bytes)
 		goto out;
 
 	/* All further extents will be NOT_RECORDED_NOT_ALLOCATED */
 	last_ext->extLocation.logicalBlockNum = 0;
 	last_ext->extLocation.partitionReferenceNum = 0;
-	add = (1 << (30-sb->s_blocksize_bits)) - 1;
-	last_ext->extLength = EXT_NOT_RECORDED_NOT_ALLOCATED |
-				(add << sb->s_blocksize_bits);
+	add = (1 << 30) - sb->s_blocksize;
+	last_ext->extLength = EXT_NOT_RECORDED_NOT_ALLOCATED | add;
 
 	/* Create enough extents to cover the whole hole */
-	while (blocks > add) {
-		blocks -= add;
+	while (new_block_bytes > add) {
+		new_block_bytes -= add;
 		err = udf_add_aext(inode, last_pos, &last_ext->extLocation,
 				   last_ext->extLength, 1);
 		if (err)
 			return err;
 		count++;
 	}
-	if (blocks) {
+	if (new_block_bytes) {
 		last_ext->extLength = EXT_NOT_RECORDED_NOT_ALLOCATED |
-			(blocks << sb->s_blocksize_bits);
+			new_block_bytes;
 		err = udf_add_aext(inode, last_pos, &last_ext->extLocation,
 				   last_ext->extLength, 1);
 		if (err)
@@ -596,6 +596,24 @@ out:
 	return count;
 }
 
+/* Extend the final block of the file to final_block_len bytes */
+static void udf_do_extend_final_block(struct inode *inode,
+				      struct extent_position *last_pos,
+				      struct kernel_long_ad *last_ext,
+				      uint32_t final_block_len)
+{
+	struct super_block *sb = inode->i_sb;
+	uint32_t added_bytes;
+
+	added_bytes = final_block_len -
+		      (last_ext->extLength & (sb->s_blocksize - 1));
+	last_ext->extLength += added_bytes;
+	UDF_I(inode)->i_lenExtents += added_bytes;
+
+	udf_write_aext(inode, last_pos, &last_ext->extLocation,
+			last_ext->extLength, 1);
+}
+
 static int udf_extend_file(struct inode *inode, loff_t newsize)
 {
 
@@ -605,10 +623,12 @@ static int udf_extend_file(struct inode
 	int8_t etype;
 	struct super_block *sb = inode->i_sb;
 	sector_t first_block = newsize >> sb->s_blocksize_bits, offset;
+	unsigned long partial_final_block;
 	int adsize;
 	struct udf_inode_info *iinfo = UDF_I(inode);
 	struct kernel_long_ad extent;
-	int err;
+	int err = 0;
+	int within_final_block;
 
 	if (iinfo->i_alloc_type == ICBTAG_FLAG_AD_SHORT)
 		adsize = sizeof(struct short_ad);
@@ -618,18 +638,8 @@ static int udf_extend_file(struct inode
 		BUG();
 
 	etype = inode_bmap(inode, first_block, &epos, &eloc, &elen, &offset);
+	within_final_block = (etype != -1);
 
-	/* File has extent covering the new size (could happen when extending
-	 * inside a block)? */
-	if (etype != -1)
-		return 0;
-	if (newsize & (sb->s_blocksize - 1))
-		offset++;
-	/* Extended file just to the boundary of the last file block? */
-	if (offset == 0)
-		return 0;
-
-	/* Truncate is extending the file by 'offset' blocks */
 	if ((!epos.bh && epos.offset == udf_file_entry_alloc_offset(inode)) ||
 	    (epos.bh && epos.offset == sizeof(struct allocExtDesc))) {
 		/* File has no extents at all or has empty last
@@ -643,7 +653,22 @@ static int udf_extend_file(struct inode
 				      &extent.extLength, 0);
 		extent.extLength |= etype << 30;
 	}
-	err = udf_do_extend_file(inode, &epos, &extent, offset);
+
+	partial_final_block = newsize & (sb->s_blocksize - 1);
+
+	/* File has extent covering the new size (could happen when extending
+	 * inside a block)?
+	 */
+	if (within_final_block) {
+		/* Extending file within the last file block */
+		udf_do_extend_final_block(inode, &epos, &extent,
+					  partial_final_block);
+	} else {
+		loff_t add = ((loff_t)offset << sb->s_blocksize_bits) |
+			     partial_final_block;
+		err = udf_do_extend_file(inode, &epos, &extent, add);
+	}
+
 	if (err < 0)
 		goto out;
 	err = 0;
@@ -745,6 +770,7 @@ static sector_t inode_getblk(struct inod
 	/* Are we beyond EOF? */
 	if (etype == -1) {
 		int ret;
+		loff_t hole_len;
 		isBeyondEOF = true;
 		if (count) {
 			if (c)
@@ -760,7 +786,8 @@ static sector_t inode_getblk(struct inod
 			startnum = (offset > 0);
 		}
 		/* Create extents for the hole between EOF and offset */
-		ret = udf_do_extend_file(inode, &prev_epos, laarr, offset);
+		hole_len = (loff_t)offset << inode->i_blkbits;
+		ret = udf_do_extend_file(inode, &prev_epos, laarr, hole_len);
 		if (ret < 0) {
 			*err = ret;
 			newblock = 0;
author maintainer
#58 lore raw

PATCH 58/91 media: stv0297: fix frequency range limit

In reply to Greg Kroah-Hartman

From: Mauro Carvalho Chehab <[email protected]>

commit b09a2ab2baeb36bf7ef7780405ad172281741c7c upstream.

There was a typo at the lower frequency limit for a DVB-C card, causing the driver to fail while tuning channels at the VHF range.

https://bugzilla.kernel.org/show_bug.cgi?id=202083

Fixes f1b1eabff0eb ("media: dvb: represent min/max/step/tolerance freqs in Hz")
---
 drivers/media/dvb-frontends/stv0297.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/media/dvb-frontends/stv0297.c +1 -1
@@ -694,7 +694,7 @@ static const struct dvb_frontend_ops stv
 	.delsys = { SYS_DVBC_ANNEX_A },
 	.info = {
 		 .name = "ST STV0297 DVB-C",
-		 .frequency_min_hz = 470 * MHz,
+		 .frequency_min_hz = 47 * MHz,
 		 .frequency_max_hz = 862 * MHz,
 		 .frequency_stepsize_hz = 62500,
 		 .symbol_rate_min = 870000,
author maintainer
#59 lore raw

PATCH 59/91 ALSA: usb-audio: Fix parse of UAC2 Extension Units

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

commit ca95c7bf3d29716916baccdc77c3c2284b703069 upstream.

Extension Unit (XU) is used to have a compatible layout with Processing Unit (PU) on UAC1, and the usb-audio driver code assumed it for parsing the descriptors. Meanwhile, on UAC2, XU became slightly incompatible with PU; namely, XU has a one-byte bmControls bitmap while PU has two bytes bmControls bitmap. This incompatibility results in the read of a wrong address for the last iExtension field, which ended up with an incorrect string for the mixer element name, as recently reported for Focusrite Scarlett 18i20 device.

This patch corrects this misalignment by introducing a couple of new macros and calling them depending on the descriptor type.

Fixes 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0")
---
 include/uapi/linux/usb/audio.h |   37 +++++++++++++++++++++++++++++++++++++
 sound/usb/mixer.c              |   16 ++++++++++------
 2 files changed, 47 insertions(+), 6 deletions(-)
include/uapi/linux/usb/audio.h +37 -0
@@ -450,6 +450,43 @@ static inline __u8 *uac_processing_unit_
 	}
 }
 
+/*
+ * Extension Unit (XU) has almost compatible layout with Processing Unit, but
+ * on UAC2, it has a different bmControls size (bControlSize); it's 1 byte for
+ * XU while 2 bytes for PU.  The last iExtension field is a one-byte index as
+ * well as iProcessing field of PU.
+ */
+static inline __u8 uac_extension_unit_bControlSize(struct uac_processing_unit_descriptor *desc,
+						   int protocol)
+{
+	switch (protocol) {
+	case UAC_VERSION_1:
+		return desc->baSourceID[desc->bNrInPins + 4];
+	case UAC_VERSION_2:
+		return 1; /* in UAC2, this value is constant */
+	case UAC_VERSION_3:
+		return 4; /* in UAC3, this value is constant */
+	default:
+		return 1;
+	}
+}
+
+static inline __u8 uac_extension_unit_iExtension(struct uac_processing_unit_descriptor *desc,
+						 int protocol)
+{
+	__u8 control_size = uac_extension_unit_bControlSize(desc, protocol);
+
+	switch (protocol) {
+	case UAC_VERSION_1:
+	case UAC_VERSION_2:
+	default:
+		return *(uac_processing_unit_bmControls(desc, protocol)
+			 + control_size);
+	case UAC_VERSION_3:
+		return 0; /* UAC3 does not have this field */
+	}
+}
+
 /* 4.5.2 Class-Specific AS Interface Descriptor */
 struct uac1_as_header_descriptor {
 	__u8  bLength;			/* in bytes: 7 */
sound/usb/mixer.c +10 -6
@@ -2322,7 +2322,7 @@ static struct procunit_info extunits[] =
  */
 static int build_audio_procunit(struct mixer_build *state, int unitid,
 				void *raw_desc, struct procunit_info *list,
-				char *name)
+				bool extension_unit)
 {
 	struct uac_processing_unit_descriptor *desc = raw_desc;
 	int num_ins;
@@ -2339,6 +2339,8 @@ static int build_audio_procunit(struct m
 	static struct procunit_info default_info = {
 		0, NULL, default_value_info
 	};
+	const char *name = extension_unit ?
+		"Extension Unit" : "Processing Unit";
 
 	if (desc->bLength < 13) {
 		usb_audio_err(state->chip, "invalid %s descriptor (id %d)\n", name, unitid);
@@ -2452,7 +2454,10 @@ static int build_audio_procunit(struct m
 		} else if (info->name) {
 			strlcpy(kctl->id.name, info->name, sizeof(kctl->id.name));
 		} else {
-			nameid = uac_processing_unit_iProcessing(desc, state->mixer->protocol);
+			if (extension_unit)
+				nameid = uac_extension_unit_iExtension(desc, state->mixer->protocol);
+			else
+				nameid = uac_processing_unit_iProcessing(desc, state->mixer->protocol);
 			len = 0;
 			if (nameid)
 				len = snd_usb_copy_string_desc(state->chip,
@@ -2485,10 +2490,10 @@ static int parse_audio_processing_unit(s
 	case UAC_VERSION_2:
 	default:
 		return build_audio_procunit(state, unitid, raw_desc,
-				procunits, "Processing Unit");
+					    procunits, false);
 	case UAC_VERSION_3:
 		return build_audio_procunit(state, unitid, raw_desc,
-				uac3_procunits, "Processing Unit");
+					    uac3_procunits, false);
 	}
 }
 
@@ -2499,8 +2504,7 @@ static int parse_audio_extension_unit(st
 	 * Note that we parse extension units with processing unit descriptors.
 	 * That's ok as the layout is the same.
 	 */
-	return build_audio_procunit(state, unitid, raw_desc,
-				    extunits, "Extension Unit");
+	return build_audio_procunit(state, unitid, raw_desc, extunits, true);
 }
 
 /*
author maintainer
#60 lore raw

PATCH 60/91 ALSA: hda/realtek - Headphone Mic cant record after S3

In reply to Greg Kroah-Hartman

From: Kailang Yang <[email protected]>

commit d07a9a4f66e944fcc900812cbc2f6817bde6a43d upstream.

Dell headset mode platform with ALC236.
It doesn't recording after system resume from S3.
S3 mode was deep. s2idle was not has this issue.
S3 deep will cut of codec power. So, the register will back to default after resume back.
This patch will solve this issue.

---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/pci/hda/patch_realtek.c +1 -1
@@ -3236,6 +3236,7 @@ static void alc256_init(struct hda_codec
 	alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x4); /* Hight power */
 	alc_update_coefex_idx(codec, 0x53, 0x02, 0x8000, 1 << 15); /* Clear bit */
 	alc_update_coefex_idx(codec, 0x53, 0x02, 0x8000, 0 << 15);
+	alc_update_coef_idx(codec, 0x36, 1 << 13, 1 << 5); /* Switch pcbeep path to Line in path*/
 }
 
 static void alc256_shutup(struct hda_codec *codec)
@@ -7686,7 +7687,6 @@ static int patch_alc269(struct hda_codec
 		spec->shutup = alc256_shutup;
 		spec->init_hook = alc256_init;
 		spec->gen.mixer_nid = 0; /* ALC256 does not have any loopback mixer path */
-		alc_update_coef_idx(codec, 0x36, 1 << 13, 1 << 5); /* Switch pcbeep path to Line in path*/
 		break;
 	case 0x10ec0257:
 		spec->codec_variant = ALC269_TYPE_ALC257;
author maintainer
#61 lore raw

PATCH 61/91 block, bfq: NULL out the bic when its no longer valid

In reply to Greg Kroah-Hartman

From: Douglas Anderson <[email protected]>

commit dbc3117d4ca9e17819ac73501e914b8422686750 upstream.

In reboot tests on several devices we were seeing a "use after free" when slub_debug or KASAN was enabled. The kernel complained about:

  Unable to handle kernel paging request at virtual address 6b6b6c2b

...which is a classic sign of use after free under slub_debug. The stack crawl in kgdb looked like:

 0  test_bit (addr=<optimized out>, nr=<optimized out>)
 1  bfq_bfqq_busy (bfqq=<optimized out>)
 2  bfq_select_queue (bfqd=<optimized out>)
 3  __bfq_dispatch_request (hctx=<optimized out>)
 4  bfq_dispatch_request (hctx=<optimized out>)
 5  0xc056ef00 in blk_mq_do_dispatch_sched (hctx=0xed249440)
 6  0xc056f728 in blk_mq_sched_dispatch_requests (hctx=0xed249440)
 7  0xc0568d24 in __blk_mq_run_hw_queue (hctx=0xed249440)
 8  0xc0568d94 in blk_mq_run_work_fn (work=<optimized out>)
 9  0xc024c5c4 in process_one_work (worker=0xec6d4640, work=0xed249480)

10 0xc024cff4 in worker_thread (__worker=0xec6d4640)

Digging in kgdb, it could be found that, though bfqq looked fine, bfqq->bic had been freed.

Through further digging, I postulated that perhaps it is illegal to access a "bic" (AKA an "icq") after bfq_exit_icq() had been called because the "bic" can be freed at some point in time after this call is made. I confirmed that there certainly were cases where the exact crashing code path would access the "bic" after bfq_exit_icq() had been called. Sspecifically I set the "bfqq->bic" to (void *)0x7 and saw that the bic was 0x7 at the time of the crash.

To understand a bit more about why this crash was fairly uncommon (I saw it only once in a few hundred reboots), you can see that much of the time bfq_exit_icq_fbqq() fully frees the bfqq and thus it can't access the ->bic anymore. The only case it doesn't is if bfq_put_queue() sees a reference still held.

However, even in the case when bfqq isn't freed, the crash is still rare. Why? I tracked what happened to the "bic" after the exit routine. It doesn't get freed right away. Rather, put_io_context_active() eventually called put_io_context() which queued up freeing on a workqueue. The freeing then actually happened later than that through call_rcu(). Despite all these delays, some extra debugging showed that all the hoops could be jumped through in time and the memory could be freed causing the original crash. Phew!

To make a long story short, assuming it truly is illegal to access an icq after the "exit_icq" callback is finished, this patch is needed.

---
 block/bfq-iosched.c |    1 +
 1 file changed, 1 insertion(+)
block/bfq-iosched.c +1 -0
@@ -4116,6 +4116,7 @@ static void bfq_exit_icq_bfqq(struct bfq
 		unsigned long flags;
 
 		spin_lock_irqsave(&bfqd->lock, flags);
+		bfqq->bic = NULL;
 		bfq_exit_bfqq(bfqd, bfqq);
 		bic_set_bfqq(bic, NULL, is_sync);
 		spin_unlock_irqrestore(&bfqd->lock, flags);
author maintainer
#62 lore raw

PATCH 62/91 perf pmu: Fix uncore PMU alias list for ARM64

In reply to Greg Kroah-Hartman

From: John Garry <[email protected]>

commit 599ee18f0740d7661b8711249096db94c09bc508 upstream.

In commit 292c34c10249 ("perf pmu: Fix core PMU alias list for X86 platform"), we fixed the issue of CPU events being aliased to uncore events.

Fix this same issue for ARM64, since the said commit left the (broken) behaviour untouched for ARM64.

Cc Alexander Shishkin <[email protected]>
Cc Ben Hutchings <[email protected]>
Cc Hendrik Brueckner <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Kan Liang <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Mathieu Poirier <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Shaokun Zhang <[email protected]>
Cc Thomas Richter <[email protected]>
Cc Will Deacon <[email protected]>
Fixes 292c34c10249 ("perf pmu: Fix core PMU alias list for X86 platform")
---
 tools/perf/util/pmu.c |   28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)
tools/perf/util/pmu.c +12 -16
@@ -750,9 +750,7 @@ static void pmu_add_cpu_aliases(struct l
 {
 	int i;
 	struct pmu_events_map *map;
-	struct pmu_event *pe;
 	const char *name = pmu->name;
-	const char *pname;
 
 	map = perf_pmu__find_map(pmu);
 	if (!map)
@@ -763,28 +761,26 @@ static void pmu_add_cpu_aliases(struct l
 	 */
 	i = 0;
 	while (1) {
+		const char *cpu_name = is_arm_pmu_core(name) ? name : "cpu";
+		struct pmu_event *pe = &map->table[i++];
+		const char *pname = pe->pmu ? pe->pmu : cpu_name;
 
-		pe = &map->table[i++];
 		if (!pe->name) {
 			if (pe->metric_group || pe->metric_name)
 				continue;
 			break;
 		}
 
-		if (!is_arm_pmu_core(name)) {
-			pname = pe->pmu ? pe->pmu : "cpu";
+		/*
+		 * uncore alias may be from different PMU
+		 * with common prefix
+		 */
+		if (pmu_is_uncore(name) &&
+		    !strncmp(pname, name, strlen(pname)))
+			goto new_alias;
 
-			/*
-			 * uncore alias may be from different PMU
-			 * with common prefix
-			 */
-			if (pmu_is_uncore(name) &&
-			    !strncmp(pname, name, strlen(pname)))
-				goto new_alias;
-
-			if (strcmp(pname, name))
-				continue;
-		}
+		if (strcmp(pname, name))
+			continue;
 
 new_alias:
 		/* need type casts to override 'const' */
author maintainer
#63 lore raw

PATCH 63/91 x86/ptrace: Fix possible spectre-v1 in ptrace_get_debugreg()

In reply to Greg Kroah-Hartman

From: Dianzhang Chen <[email protected]>

commit 31a2fbb390fee4231281b939e1979e810f945415 upstream.

The index to access the threads ptrace_bps is controlled by userspace via
syscall: sys_ptrace(), hence leading to a potential exploitation of the Spectre variant 1 vulnerability.

The index can be controlled from:

    ptrace -> arch_ptrace -> ptrace_get_debugreg.

Fix this by sanitizing the user supplied index before using it access thread->ptrace_bps.

---
 arch/x86/kernel/ptrace.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
arch/x86/kernel/ptrace.c +4 -1
@@ -24,6 +24,7 @@
 #include <linux/rcupdate.h>
 #include <linux/export.h>
 #include <linux/context_tracking.h>
+#include <linux/nospec.h>
 
 #include <linux/uaccess.h>
 #include <asm/pgtable.h>
@@ -651,9 +652,11 @@ static unsigned long ptrace_get_debugreg
 {
 	struct thread_struct *thread = &tsk->thread;
 	unsigned long val = 0;
+	int index = n;
 
 	if (n < HBP_NUM) {
-		struct perf_event *bp = thread->ptrace_bps[n];
+		index = array_index_nospec(index, HBP_NUM);
+		struct perf_event *bp = thread->ptrace_bps[index];
 
 		if (bp)
 			val = bp->hw.info.address;
author maintainer
#64 lore raw

PATCH 64/91 x86/tls: Fix possible spectre-v1 in do_get_thread_area()

In reply to Greg Kroah-Hartman

From: Dianzhang Chen <[email protected]>

commit 993773d11d45c90cb1c6481c2638c3d9f092ea5b upstream.

The index to access the threads tls array is controlled by userspace via syscall: sys_ptrace(), hence leading to a potential exploitation of the Spectre variant 1 vulnerability.

The index can be controlled from:

        ptrace -> arch_ptrace -> do_get_thread_area.

Fix this by sanitizing the user supplied index before using it to access the p->thread.tls_array.

---
 arch/x86/kernel/tls.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
arch/x86/kernel/tls.c +7 -2
@@ -5,6 +5,7 @@
 #include <linux/user.h>
 #include <linux/regset.h>
 #include <linux/syscalls.h>
+#include <linux/nospec.h>
 
 #include <linux/uaccess.h>
 #include <asm/desc.h>
@@ -220,6 +221,7 @@ int do_get_thread_area(struct task_struc
 		       struct user_desc __user *u_info)
 {
 	struct user_desc info;
+	int index;
 
 	if (idx == -1 && get_user(idx, &u_info->entry_number))
 		return -EFAULT;
@@ -227,8 +229,11 @@ int do_get_thread_area(struct task_struc
 	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
 		return -EINVAL;
 
-	fill_user_desc(&info, idx,
-		       &p->thread.tls_array[idx - GDT_ENTRY_TLS_MIN]);
+	index = idx - GDT_ENTRY_TLS_MIN;
+	index = array_index_nospec(index,
+			GDT_ENTRY_TLS_MAX - GDT_ENTRY_TLS_MIN + 1);
+
+	fill_user_desc(&info, idx, &p->thread.tls_array[index]);
 
 	if (copy_to_user(u_info, &info, sizeof(info)))
 		return -EFAULT;
author maintainer
#65 lore raw

PATCH 65/91 Documentation: Add section about CPU vulnerabilities for Spectre

In reply to Greg Kroah-Hartman

From: Tim Chen <[email protected]>

commit 6e88559470f581741bcd0f2794f9054814ac9740 upstream.

Add documentation for Spectre vulnerability and the mitigation mechanisms:

- Explain the problem and risks
- Document the mitigation mechanisms
- Document the command line controls
- Document the sysfs files

---
 Documentation/admin-guide/hw-vuln/index.rst   |    1 
 Documentation/admin-guide/hw-vuln/spectre.rst |  697 ++++++++++++++++++++++++++
 Documentation/userspace-api/spec_ctrl.rst     |    2 
 3 files changed, 700 insertions(+)
Documentation/admin-guide/hw-vuln/index.rst +1 -0
@@ -9,5 +9,6 @@ are configurable at compile, boot or run
 .. toctree::
    :maxdepth: 1
 
+   spectre
    l1tf
    mds
Documentation/admin-guide/hw-vuln/spectre.rst new file +697 -0

697 lines not on this page · raw message

Documentation/userspace-api/spec_ctrl.rst +2 -0
@@ -47,6 +47,8 @@ If PR_SPEC_PRCTL is set, then the per-ta
 available. If not set, prctl(PR_SET_SPECULATION_CTRL) for the speculation
 misfeature will fail.
 
+.. _set_spec_ctrl:
+
 PR_SET_SPECULATION_CTRL
 -----------------------
 
author maintainer
#66 lore raw

PATCH 66/91 Documentation/admin: Remove the vsyscall=native documentation

In reply to Greg Kroah-Hartman

From: Andy Lutomirski <[email protected]>

commit d974ffcfb7447db5f29a4b662a3eaf99a4e1109e upstream.

The vsyscall=native feature is gone -- remove the docs.

---
 Documentation/admin-guide/kernel-parameters.txt |    6 ------
 1 file changed, 6 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +0 -6
@@ -4976,12 +4976,6 @@
 			emulate     [default] Vsyscalls turn into traps and are
 			            emulated reasonably safely.
 
-			native      Vsyscalls are native syscall instructions.
-			            This is a little bit faster than trapping
-			            and makes a few dynamic recompilers work
-			            better than they would in emulation mode.
-			            It also makes exploits much easier to write.
-
 			none        Vsyscalls don't work at all.  This makes
 			            them quite hard to use for exploits but
 			            might break your system.
author maintainer
#67 lore raw

PATCH 67/91 mwifiex: Abort at too short BSS descriptor element

In reply to Greg Kroah-Hartman

From: Takashi Iwai <[email protected]>

commit 685c9b7750bfacd6fc1db50d86579980593b7869 upstream.

Currently mwifiex_update_bss_desc_with_ie() implicitly assumes that the source descriptor entries contain the enough size for each type and performs copying without checking the source size. This may lead to read over boundary.

Fix this by putting the source size check in appropriate places.

drivers/net/wireless/marvell/mwifiex/scan.c +15 -0
index 64ab6fe78c0d..c269a0de9413 100644
@@ -1269,6 +1269,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_FH_PARAMS:
+			if (element_len + 2 < sizeof(*fh_param_set))
+				return -EINVAL;
 			fh_param_set =
 				(struct ieee_types_fh_param_set *) current_ptr;
 			memcpy(&bss_entry->phy_param_set.fh_param_set,
@@ -1277,6 +1279,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_DS_PARAMS:
+			if (element_len + 2 < sizeof(*ds_param_set))
+				return -EINVAL;
 			ds_param_set =
 				(struct ieee_types_ds_param_set *) current_ptr;
 
@@ -1288,6 +1292,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_CF_PARAMS:
+			if (element_len + 2 < sizeof(*cf_param_set))
+				return -EINVAL;
 			cf_param_set =
 				(struct ieee_types_cf_param_set *) current_ptr;
 			memcpy(&bss_entry->ss_param_set.cf_param_set,
@@ -1296,6 +1302,8 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_IBSS_PARAMS:
+			if (element_len + 2 < sizeof(*ibss_param_set))
+				return -EINVAL;
 			ibss_param_set =
 				(struct ieee_types_ibss_param_set *)
 				current_ptr;
@@ -1305,10 +1313,14 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_ERP_INFO:
+			if (!element_len)
+				return -EINVAL;
 			bss_entry->erp_flags = *(current_ptr + 2);
 			break;
 
 		case WLAN_EID_PWR_CONSTRAINT:
+			if (!element_len)
+				return -EINVAL;
 			bss_entry->local_constraint = *(current_ptr + 2);
 			bss_entry->sensed_11h = true;
 			break;
@@ -1349,6 +1361,9 @@ int mwifiex_update_bss_desc_with_ie(struct mwifiex_adapter *adapter,
 			break;
 
 		case WLAN_EID_VENDOR_SPECIFIC:
+			if (element_len + 2 < sizeof(vendor_ie->vend_hdr))
+				return -EINVAL;
+
 			vendor_ie = (struct ieee_types_vendor_specific *)
 					current_ptr;
 
author maintainer
#68 lore raw

PATCH 68/91 mwifiex: Dont abort on small, spec-compliant vendor IEs

In reply to Greg Kroah-Hartman

From: Brian Norris <[email protected]>

commit 63d7ef36103d26f20325a921ecc96a3288560146 upstream.

Per the 802.11 specification, vendor IEs are (at minimum) only required to contain an OUI. A type field is also included in ieee80211.h (struct ieee80211_vendor_ie) but doesn't appear in the specification. The remaining fields (subtype, version) are a convention used in WMM headers.

Thus, we should not reject vendor-specific IEs that have only the minimum length (3 bytes) -- we should skip over them (since we only want to match longer IEs, that match either WMM or WPA formats). We can reject elements that don't have the minimum-required 3 byte OUI.

While we're at it, move the non-standard subtype and version fields into the WMM structs, to avoid this confusion in the future about generic "vendor header" attributes.

Fixes 685c9b7750bf ("mwifiex: Abort at too short BSS descriptor element")
Cc Takashi Iwai <[email protected]>
---
 drivers/net/wireless/marvell/mwifiex/fw.h        |   12 +++++++++---
 drivers/net/wireless/marvell/mwifiex/scan.c      |   18 +++++++++++-------
 drivers/net/wireless/marvell/mwifiex/sta_ioctl.c |    4 ++--
 drivers/net/wireless/marvell/mwifiex/wmm.c       |    2 +-
 4 files changed, 23 insertions(+), 13 deletions(-)
drivers/net/wireless/marvell/mwifiex/fw.h +9 -3
@@ -1759,9 +1759,10 @@ struct mwifiex_ie_types_wmm_queue_status
 struct ieee_types_vendor_header {
 	u8 element_id;
 	u8 len;
-	u8 oui[4];	/* 0~2: oui, 3: oui_type */
-	u8 oui_subtype;
-	u8 version;
+	struct {
+		u8 oui[3];
+		u8 oui_type;
+	} __packed oui;
 } __packed;
 
 struct ieee_types_wmm_parameter {
@@ -1775,6 +1776,9 @@ struct ieee_types_wmm_parameter {
 	 *   Version     [1]
 	 */
 	struct ieee_types_vendor_header vend_hdr;
+	u8 oui_subtype;
+	u8 version;
+
 	u8 qos_info_bitmap;
 	u8 reserved;
 	struct ieee_types_wmm_ac_parameters ac_params[IEEE80211_NUM_ACS];
@@ -1792,6 +1796,8 @@ struct ieee_types_wmm_info {
 	 *   Version     [1]
 	 */
 	struct ieee_types_vendor_header vend_hdr;
+	u8 oui_subtype;
+	u8 version;
 
 	u8 qos_info_bitmap;
 } __packed;
drivers/net/wireless/marvell/mwifiex/scan.c +11 -7
@@ -1361,21 +1361,25 @@ int mwifiex_update_bss_desc_with_ie(stru
 			break;
 
 		case WLAN_EID_VENDOR_SPECIFIC:
-			if (element_len + 2 < sizeof(vendor_ie->vend_hdr))
-				return -EINVAL;
-
 			vendor_ie = (struct ieee_types_vendor_specific *)
 					current_ptr;
 
-			if (!memcmp
-			    (vendor_ie->vend_hdr.oui, wpa_oui,
-			     sizeof(wpa_oui))) {
+			/* 802.11 requires at least 3-byte OUI. */
+			if (element_len < sizeof(vendor_ie->vend_hdr.oui.oui))
+				return -EINVAL;
+
+			/* Not long enough for a match? Skip it. */
+			if (element_len < sizeof(wpa_oui))
+				break;
+
+			if (!memcmp(&vendor_ie->vend_hdr.oui, wpa_oui,
+				    sizeof(wpa_oui))) {
 				bss_entry->bcn_wpa_ie =
 					(struct ieee_types_vendor_specific *)
 					current_ptr;
 				bss_entry->wpa_offset = (u16)
 					(current_ptr - bss_entry->beacon_buf);
-			} else if (!memcmp(vendor_ie->vend_hdr.oui, wmm_oui,
+			} else if (!memcmp(&vendor_ie->vend_hdr.oui, wmm_oui,
 				    sizeof(wmm_oui))) {
 				if (total_ie_len ==
 				    sizeof(struct ieee_types_wmm_parameter) ||
drivers/net/wireless/marvell/mwifiex/sta_ioctl.c +2 -2
@@ -1348,7 +1348,7 @@ mwifiex_set_gen_ie_helper(struct mwifiex
 			/* Test to see if it is a WPA IE, if not, then
 			 * it is a gen IE
 			 */
-			if (!memcmp(pvendor_ie->oui, wpa_oui,
+			if (!memcmp(&pvendor_ie->oui, wpa_oui,
 				    sizeof(wpa_oui))) {
 				/* IE is a WPA/WPA2 IE so call set_wpa function
 				 */
@@ -1358,7 +1358,7 @@ mwifiex_set_gen_ie_helper(struct mwifiex
 				goto next_ie;
 			}
 
-			if (!memcmp(pvendor_ie->oui, wps_oui,
+			if (!memcmp(&pvendor_ie->oui, wps_oui,
 				    sizeof(wps_oui))) {
 				/* Test to see if it is a WPS IE,
 				 * if so, enable wps session flag
drivers/net/wireless/marvell/mwifiex/wmm.c +1 -1
@@ -240,7 +240,7 @@ mwifiex_wmm_setup_queue_priorities(struc
 	mwifiex_dbg(priv->adapter, INFO,
 		    "info: WMM Parameter IE: version=%d,\t"
 		    "qos_info Parameter Set Count=%d, Reserved=%#x\n",
-		    wmm_ie->vend_hdr.version, wmm_ie->qos_info_bitmap &
+		    wmm_ie->version, wmm_ie->qos_info_bitmap &
 		    IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK,
 		    wmm_ie->reserved);
 
author maintainer
#69 lore raw

PATCH 69/91 USB: serial: ftdi_sio: add ID for isodebug v1

In reply to Greg Kroah-Hartman

From: Andreas Fritiofson <[email protected]>

commit f8377eff548170e8ea8022c067a1fbdf9e1c46a8 upstream.

This adds the vid:pid of the isodebug v1 isolated JTAG/SWD+UART. Only the second channel is available for use as a serial port.

---
 drivers/usb/serial/ftdi_sio.c     |    1 +
 drivers/usb/serial/ftdi_sio_ids.h |    6 ++++++
 2 files changed, 7 insertions(+)
drivers/usb/serial/ftdi_sio.c +1 -0
@@ -1019,6 +1019,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) },
 	/* EZPrototypes devices */
 	{ USB_DEVICE(EZPROTOTYPES_VID, HJELMSLUND_USB485_ISO_PID) },
+	{ USB_DEVICE_INTERFACE_NUMBER(UNJO_VID, UNJO_ISODEBUG_V1_PID, 1) },
 	{ }					/* Terminating entry */
 };
 
drivers/usb/serial/ftdi_sio_ids.h +6 -0
@@ -1543,3 +1543,9 @@
 #define CHETCO_SEASMART_DISPLAY_PID	0xA5AD /* SeaSmart NMEA2000 Display */
 #define CHETCO_SEASMART_LITE_PID	0xA5AE /* SeaSmart Lite USB Adapter */
 #define CHETCO_SEASMART_ANALOG_PID	0xA5AF /* SeaSmart Analog Adapter */
+
+/*
+ * Unjo AB
+ */
+#define UNJO_VID			0x22B7
+#define UNJO_ISODEBUG_V1_PID		0x150D
author maintainer
#70 lore raw

PATCH 70/91 USB: serial: option: add support for GosunCn ME3630 RNDIS mode

In reply to Greg Kroah-Hartman

From: Jörgen Storvist <[email protected]>

commit aed2a26283528fb69c38e414f649411aa48fb391 upstream.

Added USB IDs for GosunCn ME3630 cellular module in RNDIS mode.

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=03 Dev#= 18 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0601 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=b950269c
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
---
 drivers/usb/serial/option.c |    1 +
 1 file changed, 1 insertion(+)
drivers/usb/serial/option.c +1 -0
@@ -1343,6 +1343,7 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x0601, 0xff) },	/* GosunCn ZTE WeLink ME3630 (RNDIS mode) */
 	{ USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x0602, 0xff) },	/* GosunCn ZTE WeLink ME3630 (MBIM mode) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(4) },
author maintainer
#71 lore raw

PATCH 71/91 Revert "serial: 8250: Dont service RX FIFO if interrupts are disabled"

In reply to Greg Kroah-Hartman

From: Oliver Barta <[email protected]>

commit 3f2640ed7be838c3f05c0d2b0f7c7508e7431e48 upstream.

This reverts commit 2e9fe539108320820016f78ca7704a7342788380.

Reading LSR unconditionally but processing the error flags only if UART_IIR_RDI bit was set before in IIR may lead to a loss of transmission error information on UARTs where the transmission error flags are cleared by a read of LSR. Information are lost in case an error is detected right before the read of LSR while processing e.g. an UART_IIR_THRI interrupt.

Fixes 2e9fe5391083 ("serial: 8250: Don't service RX FIFO if interrupts are disabled")
Cc stable <[email protected]>
---
 drivers/tty/serial/8250/8250_port.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/tty/serial/8250/8250_port.c +1 -2
@@ -1869,8 +1869,7 @@ int serial8250_handle_irq(struct uart_po
 
 	status = serial_port_in(port, UART_LSR);
 
-	if (status & (UART_LSR_DR | UART_LSR_BI) &&
-	    iir & UART_IIR_RDI) {
+	if (status & (UART_LSR_DR | UART_LSR_BI)) {
 		if (!up->dma || handle_rx_dma(up, iir))
 			status = serial8250_rx_chars(up, status);
 	}
author maintainer
#72 lore raw

PATCH 72/91 p54usb: Fix race between disconnect and firmware loading

In reply to Greg Kroah-Hartman

From: Alan Stern <[email protected]>

commit 6e41e2257f1094acc37618bf6c856115374c6922 upstream.

The syzbot fuzzer found a bug in the p54 USB wireless driver. The issue involves a race between disconnect and the firmware-loader callback routine, and it has several aspects.

One big problem is that when the firmware can't be loaded, the callback routine tries to unbind the driver from the USB _device_ (by calling device_release_driver) instead of from the USB _interface_ to which it is actually bound (by calling usb_driver_release_interface).

The race involves access to the private data structure. The driver's disconnect handler waits for a completion that is signalled by the firmware-loader callback routine. As soon as the completion is signalled, you have to assume that the private data structure may have been deallocated by the disconnect handler -- even if the firmware was loaded without errors. However, the callback routine does access the private data several times after that point.

Another problem is that, in order to ensure that the USB device structure hasn't been freed when the callback routine runs, the driver takes a reference to it. This isn't good enough any more, because now that the callback routine calls usb_driver_release_interface, it has to ensure that the interface structure hasn't been freed.

Finally, the driver takes an unnecessary reference to the USB device structure in the probe function and drops the reference in the disconnect handler. This extra reference doesn't accomplish anything, because the USB core already guarantees that a device structure won't be deallocated while a driver is still bound to any of its interfaces.

To fix these problems, this patch makes the following changes:

Call usb_driver_release_interface() rather than device_release_driver().

Don't signal the completion until after the important information has been copied out of the private data structure, and don't refer to the private data at all thereafter.

Lock udev (the interface's parent) before unbinding the driver instead of locking udev->parent.

During the firmware loading process, take a reference to the USB interface instead of the USB device.

Don't take an unnecessary reference to the device during probe (and then don't drop it during disconnect).

---
 drivers/net/wireless/intersil/p54/p54usb.c |   43 ++++++++++++-----------------
 1 file changed, 18 insertions(+), 25 deletions(-)
drivers/net/wireless/intersil/p54/p54usb.c +18 -25
@@ -33,6 +33,8 @@ MODULE_ALIAS("prism54usb");
 MODULE_FIRMWARE("isl3886usb");
 MODULE_FIRMWARE("isl3887usb");
 
+static struct usb_driver p54u_driver;
+
 /*
  * Note:
  *
@@ -921,9 +923,9 @@ static void p54u_load_firmware_cb(const
 {
 	struct p54u_priv *priv = context;
 	struct usb_device *udev = priv->udev;
+	struct usb_interface *intf = priv->intf;
 	int err;
 
-	complete(&priv->fw_wait_load);
 	if (firmware) {
 		priv->fw = firmware;
 		err = p54u_start_ops(priv);
@@ -932,26 +934,22 @@ static void p54u_load_firmware_cb(const
 		dev_err(&udev->dev, "Firmware not found.\n");
 	}
 
-	if (err) {
-		struct device *parent = priv->udev->dev.parent;
-
-		dev_err(&udev->dev, "failed to initialize device (%d)\n", err);
-
-		if (parent)
-			device_lock(parent);
+	complete(&priv->fw_wait_load);
+	/*
+	 * At this point p54u_disconnect may have already freed
+	 * the "priv" context. Do not use it anymore!
+	 */
+	priv = NULL;
 
-		device_release_driver(&udev->dev);
-		/*
-		 * At this point p54u_disconnect has already freed
-		 * the "priv" context. Do not use it anymore!
-		 */
-		priv = NULL;
+	if (err) {
+		dev_err(&intf->dev, "failed to initialize device (%d)\n", err);
 
-		if (parent)
-			device_unlock(parent);
+		usb_lock_device(udev);
+		usb_driver_release_interface(&p54u_driver, intf);
+		usb_unlock_device(udev);
 	}
 
-	usb_put_dev(udev);
+	usb_put_intf(intf);
 }
 
 static int p54u_load_firmware(struct ieee80211_hw *dev,
@@ -972,14 +970,14 @@ static int p54u_load_firmware(struct iee
 	dev_info(&priv->udev->dev, "Loading firmware file %s\n",
 	       p54u_fwlist[i].fw);
 
-	usb_get_dev(udev);
+	usb_get_intf(intf);
 	err = request_firmware_nowait(THIS_MODULE, 1, p54u_fwlist[i].fw,
 				      device, GFP_KERNEL, priv,
 				      p54u_load_firmware_cb);
 	if (err) {
 		dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s "
 					  "(%d)!\n", p54u_fwlist[i].fw, err);
-		usb_put_dev(udev);
+		usb_put_intf(intf);
 	}
 
 	return err;
@@ -1011,8 +1009,6 @@ static int p54u_probe(struct usb_interfa
 	skb_queue_head_init(&priv->rx_queue);
 	init_usb_anchor(&priv->submitted);
 
-	usb_get_dev(udev);
-
 	/* really lazy and simple way of figuring out if we're a 3887 */
 	/* TODO: should just stick the identification in the device table */
 	i = intf->altsetting->desc.bNumEndpoints;
@@ -1053,10 +1049,8 @@ static int p54u_probe(struct usb_interfa
 		priv->upload_fw = p54u_upload_firmware_net2280;
 	}
 	err = p54u_load_firmware(dev, intf);
-	if (err) {
-		usb_put_dev(udev);
+	if (err)
 		p54_free_common(dev);
-	}
 	return err;
 }
 
@@ -1072,7 +1066,6 @@ static void p54u_disconnect(struct usb_i
 	wait_for_completion(&priv->fw_wait_load);
 	p54_unregister_common(dev);
 
-	usb_put_dev(interface_to_usbdev(intf));
 	release_firmware(priv->fw);
 	p54_free_common(dev);
 }
author maintainer
#73 lore raw

PATCH 73/91 usb: gadget: ether: Fix race between gether_disconnect and rx_submit

In reply to Greg Kroah-Hartman

From: Kiruthika Varadarajan <[email protected]>

commit d29fcf7078bc8be2b6366cbd4418265b53c94fac upstream.

On spin lock release in rx_submit, gether_disconnect get a chance to run, it makes port_usb NULL, rx_submit access NULL port USB, hence null pointer crash.

Fixed by releasing the lock in rx_submit after port_usb is used.

Fixes 2b3d942c4878 ("usb ethernet gadget: split out network core")
---
 drivers/usb/gadget/function/u_ether.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/usb/gadget/function/u_ether.c +4 -2
@@ -186,11 +186,12 @@ rx_submit(struct eth_dev *dev, struct us
 		out = dev->port_usb->out_ep;
 	else
 		out = NULL;
-	spin_unlock_irqrestore(&dev->lock, flags);
 
 	if (!out)
+	{
+		spin_unlock_irqrestore(&dev->lock, flags);
 		return -ENOTCONN;
-
+	}
 
 	/* Padding up to RX_EXTRA handles minor disagreements with host.
 	 * Normally we use the USB "terminate on short read" convention;
@@ -214,6 +215,7 @@ rx_submit(struct eth_dev *dev, struct us
 
 	if (dev->port_usb->is_fixed)
 		size = max_t(size_t, size, dev->port_usb->fixed_out_len);
+	spin_unlock_irqrestore(&dev->lock, flags);
 
 	skb = __netdev_alloc_skb(dev->net, size + NET_IP_ALIGN, gfp_flags);
 	if (skb == NULL) {
author maintainer
#74 lore raw

PATCH 74/91 usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset()

In reply to Greg Kroah-Hartman

From: Martin Blumenstingl <[email protected]>

commit dfc4fdebc5d62ac4e2fe5428e59b273675515fb2 upstream.

Use a 10000us AHB idle timeout in dwc2_core_reset() and make it consistent with the other "wait for AHB master IDLE state" ocurrences.

This fixes a problem for me where dwc2 would not want to initialize when updating to 4.19 on a MIPS Lantiq VRX200 SoC. dwc2 worked fine with 4.14.
Testing on my board shows that it takes 180us until AHB master IDLE state is signalled. The very old vendor driver for this SoC (ifxhcd) used a 1 second timeout.
Use the same timeout that is used everywhere when polling for GRSTCTL_AHBIDLE instead of using a timeout that "works for one board" (180us in my case) to have consistent behavior across the dwc2 driver.

---
 drivers/usb/dwc2/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/dwc2/core.c +1 -1
@@ -531,7 +531,7 @@ int dwc2_core_reset(struct dwc2_hsotg *h
 	}
 
 	/* Wait for AHB master IDLE state */
-	if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 50)) {
+	if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) {
 		dev_warn(hsotg->dev, "%s: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE\n",
 			 __func__);
 		return -EBUSY;
author maintainer
#75 lore raw

PATCH 75/91 usb: renesas_usbhs: add a workaround for a race condition of workqueue

In reply to Greg Kroah-Hartman

From: Yoshihiro Shimoda <[email protected]>

commit b2357839c56ab7d06bcd4e866ebc2d0e2b7997f3 upstream.

The old commit 6e4b74e4690d ("usb: renesas: fix scheduling in atomic context bug") fixed an atomic issue by using workqueue for the shdmac dmaengine driver. However, this has a potential race condition issue between the work pending and usbhsg_ep_free_request() in gadget mode. When usbhsg_ep_free_request() is called while pending the queue, since the work_struct will be freed and then the work handler is called, kernel panic happens on process_one_work().

To fix the issue, if we could call cancel_work_sync() at somewhere before the free request, it could be easy. However,
the usbhsg_ep_free_request() is called on atomic (e.g. f_ncm driver calls free request via gether_disconnect()).

For now, almost all users are having "USB-DMAC" and the DMAengine driver can be used on atomic. So, this patch adds a workaround for a race condition to call the DMAengine APIs without the workqueue.

This means we still have TODO on shdmac environment (SH7724), but since it doesn't have SMP, the race condition might not happen.

Fixes ab330cf3888d ("usb: renesas_usbhs: add support for USB-DMAC")
Cc <[email protected]> # v4.1+
---
 drivers/usb/renesas_usbhs/fifo.c |   34 ++++++++++++++++++++++------------
 1 file changed, 22 insertions(+), 12 deletions(-)
drivers/usb/renesas_usbhs/fifo.c +22 -12
@@ -802,9 +802,8 @@ static int __usbhsf_dma_map_ctrl(struct
 }
 
 static void usbhsf_dma_complete(void *arg);
-static void xfer_work(struct work_struct *work)
+static void usbhsf_dma_xfer_preparing(struct usbhs_pkt *pkt)
 {
-	struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work);
 	struct usbhs_pipe *pipe = pkt->pipe;
 	struct usbhs_fifo *fifo;
 	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
@@ -812,12 +811,10 @@ static void xfer_work(struct work_struct
 	struct dma_chan *chan;
 	struct device *dev = usbhs_priv_to_dev(priv);
 	enum dma_transfer_direction dir;
-	unsigned long flags;
 
-	usbhs_lock(priv, flags);
 	fifo = usbhs_pipe_to_fifo(pipe);
 	if (!fifo)
-		goto xfer_work_end;
+		return;
 
 	chan = usbhsf_dma_chan_get(fifo, pkt);
 	dir = usbhs_pipe_is_dir_in(pipe) ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
@@ -826,7 +823,7 @@ static void xfer_work(struct work_struct
 					pkt->trans, dir,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc)
-		goto xfer_work_end;
+		return;
 
 	desc->callback		= usbhsf_dma_complete;
 	desc->callback_param	= pipe;
@@ -834,7 +831,7 @@ static void xfer_work(struct work_struct
 	pkt->cookie = dmaengine_submit(desc);
 	if (pkt->cookie < 0) {
 		dev_err(dev, "Failed to submit dma descriptor\n");
-		goto xfer_work_end;
+		return;
 	}
 
 	dev_dbg(dev, "  %s %d (%d/ %d)\n",
@@ -845,8 +842,17 @@ static void xfer_work(struct work_struct
 	dma_async_issue_pending(chan);
 	usbhsf_dma_start(pipe, fifo);
 	usbhs_pipe_enable(pipe);
+}
+
+static void xfer_work(struct work_struct *work)
+{
+	struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work);
+	struct usbhs_pipe *pipe = pkt->pipe;
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	unsigned long flags;
 
-xfer_work_end:
+	usbhs_lock(priv, flags);
+	usbhsf_dma_xfer_preparing(pkt);
 	usbhs_unlock(priv, flags);
 }
 
@@ -899,8 +905,13 @@ static int usbhsf_dma_prepare_push(struc
 	pkt->trans = len;
 
 	usbhsf_tx_irq_ctrl(pipe, 0);
-	INIT_WORK(&pkt->work, xfer_work);
-	schedule_work(&pkt->work);
+	/* FIXME: Workaound for usb dmac that driver can be used in atomic */
+	if (usbhs_get_dparam(priv, has_usb_dmac)) {
+		usbhsf_dma_xfer_preparing(pkt);
+	} else {
+		INIT_WORK(&pkt->work, xfer_work);
+		schedule_work(&pkt->work);
+	}
 
 	return 0;
 
@@ -1006,8 +1017,7 @@ static int usbhsf_dma_prepare_pop_with_u
 
 	pkt->trans = pkt->length;
 
-	INIT_WORK(&pkt->work, xfer_work);
-	schedule_work(&pkt->work);
+	usbhsf_dma_xfer_preparing(pkt);
 
 	return 0;
 
author maintainer
#76 lore raw

PATCH 76/91 drivers/usb/typec/tps6598x.c: fix portinfo width

In reply to Greg Kroah-Hartman

From: Nikolaus Voss <[email protected]>

commit 05da75fc651138e51ff74ace97174349910463f5 upstream.

Portinfo bit field is 3 bits wide, not 2 bits. This led to a wrong driver configuration for some tps6598x configurations.

Fixes 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Cc stable <[email protected]>
---
 drivers/usb/typec/tps6598x.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/typec/tps6598x.c +1 -1
@@ -39,7 +39,7 @@
 #define TPS_STATUS_VCONN(s)		(!!((s) & BIT(7)))
 
 /* TPS_REG_SYSTEM_CONF bits */
-#define TPS_SYSCONF_PORTINFO(c)		((c) & 3)
+#define TPS_SYSCONF_PORTINFO(c)		((c) & 7)
 
 enum {
 	TPS_PORTINFO_SINK,
author maintainer
#77 lore raw

PATCH 77/91 drivers/usb/typec/tps6598x.c: fix 4CC cmd write

In reply to Greg Kroah-Hartman

From: Nikolaus Voss <[email protected]>

commit 2681795b5e7a5bf336537661010072f4c22cea31 upstream.

Writing 4CC commands with tps6598x_write_4cc() already has a pointer arg, don't reference it when using as arg to tps6598x_block_write(). Correcting this enforces the constness of the pointer to propagate to tps6598x_block_write(), so add the const qualifier there to avoid the warning.

Fixes 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Cc stable <[email protected]>
---
 drivers/usb/typec/tps6598x.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/usb/typec/tps6598x.c +2 -2
@@ -111,7 +111,7 @@ tps6598x_block_read(struct tps6598x *tps
 }
 
 static int tps6598x_block_write(struct tps6598x *tps, u8 reg,
-				void *val, size_t len)
+				const void *val, size_t len)
 {
 	u8 data[TPS_MAX_LEN + 1];
 
@@ -157,7 +157,7 @@ static inline int tps6598x_write64(struc
 static inline int
 tps6598x_write_4cc(struct tps6598x *tps, u8 reg, const char *val)
 {
-	return tps6598x_block_write(tps, reg, &val, sizeof(u32));
+	return tps6598x_block_write(tps, reg, val, 4);
 }
 
 static int tps6598x_read_partner_identity(struct tps6598x *tps)
author maintainer
#78 lore raw

PATCH 78/91 staging: comedi: dt282x: fix a null pointer deref on interrupt

In reply to Greg Kroah-Hartman

From: Ian Abbott <[email protected]>

commit b8336be66dec06bef518030a0df9847122053ec5 upstream.

The interrupt handler dt282x_interrupt() causes a null pointer dereference for those supported boards that have no analog output support. For these boards, dev->write_subdev will be NULL and therefore the s_ao subdevice pointer variable will be NULL. In that case, the following call near the end of the interrupt handler results in a null pointer dereference:

	comedi_handle_events(dev, s_ao);

Fix it by only calling the above function if s_ao is valid.

(There are other uses of s_ao by the interrupt handler that may or may not be reached depending on values of hardware registers. Trust that they are reliable for now.)

Note:
commit 4f6f009b204f ("staging: comedi: dt282x: use comedi_handle_events()") propagates an earlier error from
commit f21c74fa4cfe ("staging: comedi: dt282x: use cfc_handle_events()").

Fixes 4f6f009b204f ("staging: comedi: dt282x: use comedi_handle_events()")
Cc <[email protected]> # v3.19+
---
 drivers/staging/comedi/drivers/dt282x.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/staging/comedi/drivers/dt282x.c +2 -1
@@ -557,7 +557,8 @@ static irqreturn_t dt282x_interrupt(int
 	}
 #endif
 	comedi_handle_events(dev, s);
-	comedi_handle_events(dev, s_ao);
+	if (s_ao)
+		comedi_handle_events(dev, s_ao);
 
 	return IRQ_RETVAL(handled);
 }
author maintainer
#79 lore raw

PATCH 79/91 staging: comedi: amplc_pci230: fix null pointer deref on interrupt

In reply to Greg Kroah-Hartman

From: Ian Abbott <[email protected]>

commit 7379e6baeddf580d01feca650ec1ad508b6ea8ee upstream.

The interrupt handler pci230_interrupt() causes a null pointer dereference for a PCI260 card. There is no analog output subdevice for a PCI260. The dev->write_subdev subdevice pointer and therefore the s_ao subdevice pointer variable will be NULL for a PCI260. The following call near the end of the interrupt handler results in the null pointer dereference for a PCI260:

	comedi_handle_events(dev, s_ao);

Fix it by only calling the above function if s_ao is valid.

Note that the other uses of s_ao in the calls pci230_handle_ao_nofifo(dev, s_ao); and pci230_handle_ao_fifo(dev, s_ao); will never be reached for a PCI260, so they are safe.

Fixes 39064f23284c ("staging: comedi: amplc_pci230: use comedi_handle_events()")
Cc <[email protected]> # v3.19+
---
 drivers/staging/comedi/drivers/amplc_pci230.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/staging/comedi/drivers/amplc_pci230.c +2 -1
@@ -2330,7 +2330,8 @@ static irqreturn_t pci230_interrupt(int
 	devpriv->intr_running = false;
 	spin_unlock_irqrestore(&devpriv->isr_spinlock, irqflags);
 
-	comedi_handle_events(dev, s_ao);
+	if (s_ao)
+		comedi_handle_events(dev, s_ao);
 	comedi_handle_events(dev, s_ai);
 
 	return IRQ_HANDLED;
author maintainer
#80 lore raw

PATCH 80/91 HID: Add another Primax PIXART OEM mouse quirk

In reply to Greg Kroah-Hartman

From: Sebastian Parschauer <[email protected]>

commit 4c12954965fdf33d8ae3883c1931fc29ca023cfb upstream.

The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for this Alienware branded Primax mouse as well.

Daniel Schepler (@dschepler) reported and tested the quirk.
Reference: https://github.com/sriemer/fix-linux-mouse/issues/15

---
 drivers/hid/hid-ids.h    |    1 +
 drivers/hid/hid-quirks.c |    1 +
 2 files changed, 2 insertions(+)
drivers/hid/hid-ids.h +1 -0
@@ -1212,6 +1212,7 @@
 #define USB_DEVICE_ID_PRIMAX_KEYBOARD	0x4e05
 #define USB_DEVICE_ID_PRIMAX_REZEL	0x4e72
 #define USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D0F	0x4d0f
+#define USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D65	0x4d65
 #define USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4E22	0x4e22
 
 
drivers/hid/hid-quirks.c +1 -0
@@ -131,6 +131,7 @@ static const struct hid_device_id hid_qu
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_MOUSE_4D22), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D0F), HID_QUIRK_ALWAYS_POLL },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D65), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4E22), HID_QUIRK_ALWAYS_POLL },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS), HID_QUIRK_NOGET },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001), HID_QUIRK_NOGET },
author maintainer
#81 lore raw

PATCH 81/91 lkdtm: support llvm-objcopy

In reply to Greg Kroah-Hartman

From: Nick Desaulniers <[email protected]>

commit e9e08a07385e08f1a7f85c5d1e345c21c9564963 upstream.

With CONFIG_LKDTM=y and make OBJCOPY=llvm-objcopy, llvm-objcopy errors:
llvm-objcopy: error: --set-section-flags=.text conflicts with --rename-section=.text=.rodata

Rather than support setting flags then renaming sections vs renaming then setting flags, it's simpler to just change both at the same time via --rename-section. Adding the load flag is required for GNU objcopy to mark .rodata Type as PROGBITS after the rename.

This can be verified with:

$ readelf -S drivers/misc/lkdtm/rodata_objcopy.o
...
Section Headers:
  [Nr] Name              Type             Address           Offset
       Size              EntSize          Flags  Link  Info  Align
...
  [ 1] .rodata           PROGBITS         0000000000000000  00000040
       0000000000000004  0000000000000000   A       0     0     4
...

Which shows that .text is now renamed .rodata, the alloc flag A is set, the type is PROGBITS, and the section is not flagged as writeable W.

---
 drivers/misc/lkdtm/Makefile |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/misc/lkdtm/Makefile +1 -2
@@ -13,8 +13,7 @@ KCOV_INSTRUMENT_rodata.o	:= n
 
 OBJCOPYFLAGS :=
 OBJCOPYFLAGS_rodata_objcopy.o	:= \
-			--set-section-flags .text=alloc,readonly \
-			--rename-section .text=.rodata
+			--rename-section .text=.rodata,alloc,readonly,load
 targets += rodata.o rodata_objcopy.o
 $(obj)/rodata_objcopy.o: $(obj)/rodata.o FORCE
 	$(call if_changed,objcopy)
author maintainer
#82 lore raw

PATCH 82/91 binder: fix memory leak in error path

In reply to Greg Kroah-Hartman

From: Todd Kjos <[email protected]>

commit 1909a671dbc3606685b1daf8b22a16f65ea7edda upstream.

syzkallar found a 32-byte memory leak in a rarely executed error case. The transaction complete work item was not freed if put_user() failed when writing the BR_TRANSACTION_COMPLETE to the user command buffer. Fixed by freeing it before put_user() is called.

---
 drivers/android/binder.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/android/binder.c +2 -2
@@ -3936,6 +3936,8 @@ retry:
 		case BINDER_WORK_TRANSACTION_COMPLETE: {
 			binder_inner_proc_unlock(proc);
 			cmd = BR_TRANSACTION_COMPLETE;
+			kfree(w);
+			binder_stats_deleted(BINDER_STAT_TRANSACTION_COMPLETE);
 			if (put_user(cmd, (uint32_t __user *)ptr))
 				return -EFAULT;
 			ptr += sizeof(uint32_t);
@@ -3944,8 +3946,6 @@ retry:
 			binder_debug(BINDER_DEBUG_TRANSACTION_COMPLETE,
 				     "%d:%d BR_TRANSACTION_COMPLETE\n",
 				     proc->pid, thread->pid);
-			kfree(w);
-			binder_stats_deleted(BINDER_STAT_TRANSACTION_COMPLETE);
 		} break;
 		case BINDER_WORK_NODE: {
 			struct binder_node *node = container_of(w, struct binder_node, work);
author maintainer
#83 lore raw

PATCH 83/91 carl9170: fix misuse of device driver API

In reply to Greg Kroah-Hartman

From: Christian Lamparter <[email protected]>

commit feb09b2933275a70917a869989ea2823e7356be8 upstream.

This patch follows Alan Stern's recent patch:
"p54: Fix race between disconnect and firmware loading"

that overhauled carl9170 buggy firmware loading and driver unbinding procedures.

Since the carl9170 code was adapted from p54 it uses the same functions and is likely to have the same problem, but it's just that the syzbot hasn't reproduce them (yet).

a summary from the changes (copied from the p54 patch):
* Call usb_driver_release_interface() rather than device_release_driver().

* Lock udev (the interface's parent) before unbinding the driver instead of locking udev->parent.

* During the firmware loading process, take a reference to the USB interface instead of the USB device.

* Don't take an unnecessary reference to the device during probe (and then don't drop it during disconnect).

and

* Make sure to prevent use-after-free bugs by explicitly setting the driver context to NULL after signaling the completion.

---
 drivers/net/wireless/ath/carl9170/usb.c |   39 +++++++++++++-------------------
 1 file changed, 17 insertions(+), 22 deletions(-)
drivers/net/wireless/ath/carl9170/usb.c +17 -22
@@ -128,6 +128,8 @@ static const struct usb_device_id carl91
 };
 MODULE_DEVICE_TABLE(usb, carl9170_usb_ids);
 
+static struct usb_driver carl9170_driver;
+
 static void carl9170_usb_submit_data_urb(struct ar9170 *ar)
 {
 	struct urb *urb;
@@ -966,32 +968,28 @@ err_out:
 
 static void carl9170_usb_firmware_failed(struct ar9170 *ar)
 {
-	struct device *parent = ar->udev->dev.parent;
-	struct usb_device *udev;
-
-	/*
-	 * Store a copy of the usb_device pointer locally.
-	 * This is because device_release_driver initiates
-	 * carl9170_usb_disconnect, which in turn frees our
-	 * driver context (ar).
+	/* Store a copies of the usb_interface and usb_device pointer locally.
+	 * This is because release_driver initiates carl9170_usb_disconnect,
+	 * which in turn frees our driver context (ar).
 	 */
-	udev = ar->udev;
+	struct usb_interface *intf = ar->intf;
+	struct usb_device *udev = ar->udev;
 
 	complete(&ar->fw_load_wait);
+	/* at this point 'ar' could be already freed. Don't use it anymore */
+	ar = NULL;
 
 	/* unbind anything failed */
-	if (parent)
-		device_lock(parent);
-
-	device_release_driver(&udev->dev);
-	if (parent)
-		device_unlock(parent);
+	usb_lock_device(udev);
+	usb_driver_release_interface(&carl9170_driver, intf);
+	usb_unlock_device(udev);
 
-	usb_put_dev(udev);
+	usb_put_intf(intf);
 }
 
 static void carl9170_usb_firmware_finish(struct ar9170 *ar)
 {
+	struct usb_interface *intf = ar->intf;
 	int err;
 
 	err = carl9170_parse_firmware(ar);
@@ -1009,7 +1007,7 @@ static void carl9170_usb_firmware_finish
 		goto err_unrx;
 
 	complete(&ar->fw_load_wait);
-	usb_put_dev(ar->udev);
+	usb_put_intf(intf);
 	return;
 
 err_unrx:
@@ -1052,7 +1050,6 @@ static int carl9170_usb_probe(struct usb
 		return PTR_ERR(ar);
 
 	udev = interface_to_usbdev(intf);
-	usb_get_dev(udev);
 	ar->udev = udev;
 	ar->intf = intf;
 	ar->features = id->driver_info;
@@ -1094,15 +1091,14 @@ static int carl9170_usb_probe(struct usb
 	atomic_set(&ar->rx_anch_urbs, 0);
 	atomic_set(&ar->rx_pool_urbs, 0);
 
-	usb_get_dev(ar->udev);
+	usb_get_intf(intf);
 
 	carl9170_set_state(ar, CARL9170_STOPPED);
 
 	err = request_firmware_nowait(THIS_MODULE, 1, CARL9170FW_NAME,
 		&ar->udev->dev, GFP_KERNEL, ar, carl9170_usb_firmware_step2);
 	if (err) {
-		usb_put_dev(udev);
-		usb_put_dev(udev);
+		usb_put_intf(intf);
 		carl9170_free(ar);
 	}
 	return err;
@@ -1131,7 +1127,6 @@ static void carl9170_usb_disconnect(stru
 
 	carl9170_release_firmware(ar);
 	carl9170_free(ar);
-	usb_put_dev(udev);
 }
 
 #ifdef CONFIG_PM
author maintainer
#84 lore raw

PATCH 84/91 VMCI: Fix integer overflow in VMCI handle arrays

In reply to Greg Kroah-Hartman

From: Vishnu DASA <[email protected]>

commit 1c2eb5b2853c9f513690ba6b71072d8eb65da16a upstream.

The VMCI handle array has an integer overflow in vmci_handle_arr_append_entry when it tries to expand the array. This can be triggered from a guest, since the doorbell link hypercall doesn't impose a limit on the number of doorbell handles that a VM can create in the hypervisor, and these handles are stored in a handle array.

In this change, we introduce a mandatory max capacity for handle arrays/lists to avoid excessive memory usage.

---
 drivers/misc/vmw_vmci/vmci_context.c      |   80 ++++++++++++++++--------------
 drivers/misc/vmw_vmci/vmci_handle_array.c |   38 +++++++++-----
 drivers/misc/vmw_vmci/vmci_handle_array.h |   29 +++++++---
 include/linux/vmw_vmci_defs.h             |   11 +++-
 4 files changed, 99 insertions(+), 59 deletions(-)
drivers/misc/vmw_vmci/vmci_context.c +45 -35
@@ -29,6 +29,9 @@
 #include "vmci_driver.h"
 #include "vmci_event.h"
 
+/* Use a wide upper bound for the maximum contexts. */
+#define VMCI_MAX_CONTEXTS 2000
+
 /*
  * List of current VMCI contexts.  Contexts can be added by
  * vmci_ctx_create() and removed via vmci_ctx_destroy().
@@ -125,19 +128,22 @@ struct vmci_ctx *vmci_ctx_create(u32 cid
 	/* Initialize host-specific VMCI context. */
 	init_waitqueue_head(&context->host_context.wait_queue);
 
-	context->queue_pair_array = vmci_handle_arr_create(0);
+	context->queue_pair_array =
+		vmci_handle_arr_create(0, VMCI_MAX_GUEST_QP_COUNT);
 	if (!context->queue_pair_array) {
 		error = -ENOMEM;
 		goto err_free_ctx;
 	}
 
-	context->doorbell_array = vmci_handle_arr_create(0);
+	context->doorbell_array =
+		vmci_handle_arr_create(0, VMCI_MAX_GUEST_DOORBELL_COUNT);
 	if (!context->doorbell_array) {
 		error = -ENOMEM;
 		goto err_free_qp_array;
 	}
 
-	context->pending_doorbell_array = vmci_handle_arr_create(0);
+	context->pending_doorbell_array =
+		vmci_handle_arr_create(0, VMCI_MAX_GUEST_DOORBELL_COUNT);
 	if (!context->pending_doorbell_array) {
 		error = -ENOMEM;
 		goto err_free_db_array;
@@ -212,7 +218,7 @@ static int ctx_fire_notification(u32 con
 	 * We create an array to hold the subscribers we find when
 	 * scanning through all contexts.
 	 */
-	subscriber_array = vmci_handle_arr_create(0);
+	subscriber_array = vmci_handle_arr_create(0, VMCI_MAX_CONTEXTS);
 	if (subscriber_array == NULL)
 		return VMCI_ERROR_NO_MEM;
 
@@ -631,20 +637,26 @@ int vmci_ctx_add_notification(u32 contex
 
 	spin_lock(&context->lock);
 
-	list_for_each_entry(n, &context->notifier_list, node) {
-		if (vmci_handle_is_equal(n->handle, notifier->handle)) {
-			exists = true;
-			break;
+	if (context->n_notifiers < VMCI_MAX_CONTEXTS) {
+		list_for_each_entry(n, &context->notifier_list, node) {
+			if (vmci_handle_is_equal(n->handle, notifier->handle)) {
+				exists = true;
+				break;
+			}
 		}
-	}
 
-	if (exists) {
-		kfree(notifier);
-		result = VMCI_ERROR_ALREADY_EXISTS;
+		if (exists) {
+			kfree(notifier);
+			result = VMCI_ERROR_ALREADY_EXISTS;
+		} else {
+			list_add_tail_rcu(&notifier->node,
+					  &context->notifier_list);
+			context->n_notifiers++;
+			result = VMCI_SUCCESS;
+		}
 	} else {
-		list_add_tail_rcu(&notifier->node, &context->notifier_list);
-		context->n_notifiers++;
-		result = VMCI_SUCCESS;
+		kfree(notifier);
+		result = VMCI_ERROR_NO_MEM;
 	}
 
 	spin_unlock(&context->lock);
@@ -729,8 +741,7 @@ static int vmci_ctx_get_chkpt_doorbells(
 					u32 *buf_size, void **pbuf)
 {
 	struct dbell_cpt_state *dbells;
-	size_t n_doorbells;
-	int i;
+	u32 i, n_doorbells;
 
 	n_doorbells = vmci_handle_arr_get_size(context->doorbell_array);
 	if (n_doorbells > 0) {
@@ -868,7 +879,8 @@ int vmci_ctx_rcv_notifications_get(u32 c
 	spin_lock(&context->lock);
 
 	*db_handle_array = context->pending_doorbell_array;
-	context->pending_doorbell_array = vmci_handle_arr_create(0);
+	context->pending_doorbell_array =
+		vmci_handle_arr_create(0, VMCI_MAX_GUEST_DOORBELL_COUNT);
 	if (!context->pending_doorbell_array) {
 		context->pending_doorbell_array = *db_handle_array;
 		*db_handle_array = NULL;
@@ -950,12 +962,11 @@ int vmci_ctx_dbell_create(u32 context_id
 		return VMCI_ERROR_NOT_FOUND;
 
 	spin_lock(&context->lock);
-	if (!vmci_handle_arr_has_entry(context->doorbell_array, handle)) {
-		vmci_handle_arr_append_entry(&context->doorbell_array, handle);
-		result = VMCI_SUCCESS;
-	} else {
+	if (!vmci_handle_arr_has_entry(context->doorbell_array, handle))
+		result = vmci_handle_arr_append_entry(&context->doorbell_array,
+						      handle);
+	else
 		result = VMCI_ERROR_DUPLICATE_ENTRY;
-	}
 
 	spin_unlock(&context->lock);
 	vmci_ctx_put(context);
@@ -1091,15 +1102,16 @@ int vmci_ctx_notify_dbell(u32 src_cid,
 			if (!vmci_handle_arr_has_entry(
 					dst_context->pending_doorbell_array,
 					handle)) {
-				vmci_handle_arr_append_entry(
+				result = vmci_handle_arr_append_entry(
 					&dst_context->pending_doorbell_array,
 					handle);
-
-				ctx_signal_notify(dst_context);
-				wake_up(&dst_context->host_context.wait_queue);
-
+				if (result == VMCI_SUCCESS) {
+					ctx_signal_notify(dst_context);
+					wake_up(&dst_context->host_context.wait_queue);
+				}
+			} else {
+				result = VMCI_SUCCESS;
 			}
-			result = VMCI_SUCCESS;
 		}
 		spin_unlock(&dst_context->lock);
 	}
@@ -1126,13 +1138,11 @@ int vmci_ctx_qp_create(struct vmci_ctx *
 	if (context == NULL || vmci_handle_is_invalid(handle))
 		return VMCI_ERROR_INVALID_ARGS;
 
-	if (!vmci_handle_arr_has_entry(context->queue_pair_array, handle)) {
-		vmci_handle_arr_append_entry(&context->queue_pair_array,
-					     handle);
-		result = VMCI_SUCCESS;
-	} else {
+	if (!vmci_handle_arr_has_entry(context->queue_pair_array, handle))
+		result = vmci_handle_arr_append_entry(
+			&context->queue_pair_array, handle);
+	else
 		result = VMCI_ERROR_DUPLICATE_ENTRY;
-	}
 
 	return result;
 }
drivers/misc/vmw_vmci/vmci_handle_array.c +25 -13
@@ -16,24 +16,29 @@
 #include <linux/slab.h>
 #include "vmci_handle_array.h"
 
-static size_t handle_arr_calc_size(size_t capacity)
+static size_t handle_arr_calc_size(u32 capacity)
 {
-	return sizeof(struct vmci_handle_arr) +
+	return VMCI_HANDLE_ARRAY_HEADER_SIZE +
 	    capacity * sizeof(struct vmci_handle);
 }
 
-struct vmci_handle_arr *vmci_handle_arr_create(size_t capacity)
+struct vmci_handle_arr *vmci_handle_arr_create(u32 capacity, u32 max_capacity)
 {
 	struct vmci_handle_arr *array;
 
+	if (max_capacity == 0 || capacity > max_capacity)
+		return NULL;
+
 	if (capacity == 0)
-		capacity = VMCI_HANDLE_ARRAY_DEFAULT_SIZE;
+		capacity = min((u32)VMCI_HANDLE_ARRAY_DEFAULT_CAPACITY,
+			       max_capacity);
 
 	array = kmalloc(handle_arr_calc_size(capacity), GFP_ATOMIC);
 	if (!array)
 		return NULL;
 
 	array->capacity = capacity;
+	array->max_capacity = max_capacity;
 	array->size = 0;
 
 	return array;
@@ -44,27 +49,34 @@ void vmci_handle_arr_destroy(struct vmci
 	kfree(array);
 }
 
-void vmci_handle_arr_append_entry(struct vmci_handle_arr **array_ptr,
-				  struct vmci_handle handle)
+int vmci_handle_arr_append_entry(struct vmci_handle_arr **array_ptr,
+				 struct vmci_handle handle)
 {
 	struct vmci_handle_arr *array = *array_ptr;
 
 	if (unlikely(array->size >= array->capacity)) {
 		/* reallocate. */
 		struct vmci_handle_arr *new_array;
-		size_t new_capacity = array->capacity * VMCI_ARR_CAP_MULT;
-		size_t new_size = handle_arr_calc_size(new_capacity);
+		u32 capacity_bump = min(array->max_capacity - array->capacity,
+					array->capacity);
+		size_t new_size = handle_arr_calc_size(array->capacity +
+						       capacity_bump);
+
+		if (array->size >= array->max_capacity)
+			return VMCI_ERROR_NO_MEM;
 
 		new_array = krealloc(array, new_size, GFP_ATOMIC);
 		if (!new_array)
-			return;
+			return VMCI_ERROR_NO_MEM;
 
-		new_array->capacity = new_capacity;
+		new_array->capacity += capacity_bump;
 		*array_ptr = array = new_array;
 	}
 
 	array->entries[array->size] = handle;
 	array->size++;
+
+	return VMCI_SUCCESS;
 }
 
 /*
@@ -74,7 +86,7 @@ struct vmci_handle vmci_handle_arr_remov
 						struct vmci_handle entry_handle)
 {
 	struct vmci_handle handle = VMCI_INVALID_HANDLE;
-	size_t i;
+	u32 i;
 
 	for (i = 0; i < array->size; i++) {
 		if (vmci_handle_is_equal(array->entries[i], entry_handle)) {
@@ -109,7 +121,7 @@ struct vmci_handle vmci_handle_arr_remov
  * Handle at given index, VMCI_INVALID_HANDLE if invalid index.
  */
 struct vmci_handle
-vmci_handle_arr_get_entry(const struct vmci_handle_arr *array, size_t index)
+vmci_handle_arr_get_entry(const struct vmci_handle_arr *array, u32 index)
 {
 	if (unlikely(index >= array->size))
 		return VMCI_INVALID_HANDLE;
@@ -120,7 +132,7 @@ vmci_handle_arr_get_entry(const struct v
 bool vmci_handle_arr_has_entry(const struct vmci_handle_arr *array,
 			       struct vmci_handle entry_handle)
 {
-	size_t i;
+	u32 i;
 
 	for (i = 0; i < array->size; i++)
 		if (vmci_handle_is_equal(array->entries[i], entry_handle))
drivers/misc/vmw_vmci/vmci_handle_array.h +19 -10
@@ -17,32 +17,41 @@
 #define _VMCI_HANDLE_ARRAY_H_
 
 #include <linux/vmw_vmci_defs.h>
+#include <linux/limits.h>
 #include <linux/types.h>
 
-#define VMCI_HANDLE_ARRAY_DEFAULT_SIZE 4
-#define VMCI_ARR_CAP_MULT 2	/* Array capacity multiplier */
-
 struct vmci_handle_arr {
-	size_t capacity;
-	size_t size;
+	u32 capacity;
+	u32 max_capacity;
+	u32 size;
+	u32 pad;
 	struct vmci_handle entries[];
 };
 
-struct vmci_handle_arr *vmci_handle_arr_create(size_t capacity);
+#define VMCI_HANDLE_ARRAY_HEADER_SIZE				\
+	offsetof(struct vmci_handle_arr, entries)
+/* Select a default capacity that results in a 64 byte sized array */
+#define VMCI_HANDLE_ARRAY_DEFAULT_CAPACITY			6
+/* Make sure that the max array size can be expressed by a u32 */
+#define VMCI_HANDLE_ARRAY_MAX_CAPACITY				\
+	((U32_MAX - VMCI_HANDLE_ARRAY_HEADER_SIZE - 1) /	\
+	sizeof(struct vmci_handle))
+
+struct vmci_handle_arr *vmci_handle_arr_create(u32 capacity, u32 max_capacity);
 void vmci_handle_arr_destroy(struct vmci_handle_arr *array);
-void vmci_handle_arr_append_entry(struct vmci_handle_arr **array_ptr,
-				  struct vmci_handle handle);
+int vmci_handle_arr_append_entry(struct vmci_handle_arr **array_ptr,
+				 struct vmci_handle handle);
 struct vmci_handle vmci_handle_arr_remove_entry(struct vmci_handle_arr *array,
 						struct vmci_handle
 						entry_handle);
 struct vmci_handle vmci_handle_arr_remove_tail(struct vmci_handle_arr *array);
 struct vmci_handle
-vmci_handle_arr_get_entry(const struct vmci_handle_arr *array, size_t index);
+vmci_handle_arr_get_entry(const struct vmci_handle_arr *array, u32 index);
 bool vmci_handle_arr_has_entry(const struct vmci_handle_arr *array,
 			       struct vmci_handle entry_handle);
 struct vmci_handle *vmci_handle_arr_get_handles(struct vmci_handle_arr *array);
 
-static inline size_t vmci_handle_arr_get_size(
+static inline u32 vmci_handle_arr_get_size(
 	const struct vmci_handle_arr *array)
 {
 	return array->size;
include/linux/vmw_vmci_defs.h +10 -1
@@ -68,9 +68,18 @@ enum {
 
 /*
  * A single VMCI device has an upper limit of 128MB on the amount of
- * memory that can be used for queue pairs.
+ * memory that can be used for queue pairs. Since each queue pair
+ * consists of at least two pages, the memory limit also dictates the
+ * number of queue pairs a guest can create.
  */
 #define VMCI_MAX_GUEST_QP_MEMORY (128 * 1024 * 1024)
+#define VMCI_MAX_GUEST_QP_COUNT  (VMCI_MAX_GUEST_QP_MEMORY / PAGE_SIZE / 2)
+
+/*
+ * There can be at most PAGE_SIZE doorbells since there is one doorbell
+ * per byte in the doorbell bitmap page.
+ */
+#define VMCI_MAX_GUEST_DOORBELL_COUNT PAGE_SIZE
 
 /*
  * Queues with pre-mapped data pages must be small, so that we don't pin
author maintainer
#85 lore raw

PATCH 85/91 MIPS: Remove superfluous check for __linux__

In reply to Greg Kroah-Hartman

From: Sean Young <[email protected]>

commit 1287533d3d95d5ad8b02773733044500b1be06bc upstream.

When building BPF code using "clang -target bpf -c", clang does not define __linux__.

To build BPF IR decoders the include linux/lirc.h is needed which includes linux/types.h. Currently this workaround is needed:

https://git.linuxtv.org/v4l-utils.git/commit/?id=dd3ff81f58c4e1e6f33765dc61ad33c48ae6bb07

This check might otherwise be useful to stop users from using a non-linux compiler, but if you're doing that you are going to have a lot more trouble anyway.

Patchwork: https://patchwork.linux-mips.org/patch/21149/

---
 arch/mips/include/uapi/asm/sgidefs.h |    8 --------
 1 file changed, 8 deletions(-)
arch/mips/include/uapi/asm/sgidefs.h +0 -8
@@ -12,14 +12,6 @@
 #define __ASM_SGIDEFS_H
 
 /*
- * Using a Linux compiler for building Linux seems logic but not to
- * everybody.
- */
-#ifndef __linux__
-#error Use a Linux compiler or give up.
-#endif
-
-/*
  * Definitions for the ISA levels
  *
  * With the introduction of MIPS32 / MIPS64 instruction sets definitions
author maintainer
#86 lore raw

PATCH 86/91 staging: fsl-dpaa2/ethsw: fix memory leak of switchdev_work

In reply to Greg Kroah-Hartman

From: Colin Ian King <[email protected]>

commit 5555ebbbac822b4fa28db2be15aaf98b3c21af26 upstream.

In the default event case switchdev_work is being leaked because nothing is queued for work. Fix this by kfree'ing switchdev_work before returning NOTIFY_DONE.

Addresses-Coverity: ("Resource leak")

Fixes 44baaa43d7cc ("staging: fsl-dpaa2/ethsw: Add Freescale DPAA2 Ethernet Switch driver")
---
 drivers/staging/fsl-dpaa2/ethsw/ethsw.c |    1 +
 1 file changed, 1 insertion(+)
drivers/staging/fsl-dpaa2/ethsw/ethsw.c +1 -0
@@ -1073,6 +1073,7 @@ static int port_switchdev_event(struct n
 		dev_hold(dev);
 		break;
 	default:
+		kfree(switchdev_work);
 		return NOTIFY_DONE;
 	}
 
author maintainer
#87 lore raw

PATCH 87/91 staging: bcm2835-camera: Replace spinlock protecting context_map with mutex

In reply to Greg Kroah-Hartman

From: Dave Stevenson <[email protected]>

commit 8dedab2903f152aa3cee9ae3d57c828dea0d356e upstream.

The commit "staging: bcm2835-camera: Replace open-coded idr with a struct idr." replaced an internal implementation of an idr with the standard functions and a spinlock. idr_alloc(GFP_KERNEL) can sleep whilst calling kmem_cache_alloc to allocate the new node, but this is not valid whilst in an atomic context due to the spinlock.

There is no need for this to be a spinlock as a standard mutex is sufficient.

Fixes 950fd867c635 ("staging: bcm2835-camera: Replace open-coded idr with a struct idr.")
---
 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c +7 -6
@@ -162,7 +162,8 @@ struct vchiq_mmal_instance {
 	void *bulk_scratch;
 
 	struct idr context_map;
-	spinlock_t context_map_lock;
+	/* protect accesses to context_map */
+	struct mutex context_map_lock;
 
 	/* component to use next */
 	int component_idx;
@@ -185,10 +186,10 @@ get_msg_context(struct vchiq_mmal_instan
 	 * that when we service the VCHI reply, we can look up what
 	 * message is being replied to.
 	 */
-	spin_lock(&instance->context_map_lock);
+	mutex_lock(&instance->context_map_lock);
 	handle = idr_alloc(&instance->context_map, msg_context,
 			   0, 0, GFP_KERNEL);
-	spin_unlock(&instance->context_map_lock);
+	mutex_unlock(&instance->context_map_lock);
 
 	if (handle < 0) {
 		kfree(msg_context);
@@ -212,9 +213,9 @@ release_msg_context(struct mmal_msg_cont
 {
 	struct vchiq_mmal_instance *instance = msg_context->instance;
 
-	spin_lock(&instance->context_map_lock);
+	mutex_lock(&instance->context_map_lock);
 	idr_remove(&instance->context_map, msg_context->handle);
-	spin_unlock(&instance->context_map_lock);
+	mutex_unlock(&instance->context_map_lock);
 	kfree(msg_context);
 }
 
@@ -1854,7 +1855,7 @@ int vchiq_mmal_init(struct vchiq_mmal_in
 
 	instance->bulk_scratch = vmalloc(PAGE_SIZE);
 
-	spin_lock_init(&instance->context_map_lock);
+	mutex_init(&instance->context_map_lock);
 	idr_init_base(&instance->context_map, 1);
 
 	params.callback_param = instance;
author maintainer
#88 lore raw

PATCH 88/91 staging: bcm2835-camera: Ensure all buffers are returned on disable

In reply to Greg Kroah-Hartman

From: Dave Stevenson <[email protected]>

commit 70ec64ccdaac5d8f634338e33b016c1c99831499 upstream.

With the recent change to match MMAL and V4L2 buffers there is a need to wait for all MMAL buffers to be returned during stop_streaming.

Fixes 938416707071 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping")
---
 drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c |   22 +++++++---
 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c     |    4 +
 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h     |    3 +
 3 files changed, 23 insertions(+), 6 deletions(-)
drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +16 -6
@@ -582,6 +582,7 @@ static void stop_streaming(struct vb2_qu
 	int ret;
 	unsigned long timeout;
 	struct bm2835_mmal_dev *dev = vb2_get_drv_priv(vq);
+	struct vchiq_mmal_port *port = dev->capture.port;
 
 	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev, "%s: dev:%p\n",
 		 __func__, dev);
@@ -605,12 +606,6 @@ static void stop_streaming(struct vb2_qu
 				      &dev->capture.frame_count,
 				      sizeof(dev->capture.frame_count));
 
-	/* wait for last frame to complete */
-	timeout = wait_for_completion_timeout(&dev->capture.frame_cmplt, HZ);
-	if (timeout == 0)
-		v4l2_err(&dev->v4l2_dev,
-			 "timed out waiting for frame completion\n");
-
 	v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
 		 "disabling connection\n");
 
@@ -625,6 +620,21 @@ static void stop_streaming(struct vb2_qu
 			 ret);
 	}
 
+	/* wait for all buffers to be returned */
+	while (atomic_read(&port->buffers_with_vpu)) {
+		v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+			 "%s: Waiting for buffers to be returned - %d outstanding\n",
+			 __func__, atomic_read(&port->buffers_with_vpu));
+		timeout = wait_for_completion_timeout(&dev->capture.frame_cmplt,
+						      HZ);
+		if (timeout == 0) {
+			v4l2_err(&dev->v4l2_dev, "%s: Timeout waiting for buffers to be returned - %d outstanding\n",
+				 __func__,
+				 atomic_read(&port->buffers_with_vpu));
+			break;
+		}
+	}
+
 	if (disable_camera(dev) < 0)
 		v4l2_err(&dev->v4l2_dev, "Failed to disable camera\n");
 }
drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c +4 -0
@@ -241,6 +241,8 @@ static void buffer_work_cb(struct work_s
 	struct mmal_msg_context *msg_context =
 		container_of(work, struct mmal_msg_context, u.bulk.work);
 
+	atomic_dec(&msg_context->u.bulk.port->buffers_with_vpu);
+
 	msg_context->u.bulk.port->buffer_cb(msg_context->u.bulk.instance,
 					    msg_context->u.bulk.port,
 					    msg_context->u.bulk.status,
@@ -381,6 +383,8 @@ buffer_from_host(struct vchiq_mmal_insta
 	/* initialise work structure ready to schedule callback */
 	INIT_WORK(&msg_context->u.bulk.work, buffer_work_cb);
 
+	atomic_inc(&port->buffers_with_vpu);
+
 	/* prep the buffer from host message */
 	memset(&m, 0xbc, sizeof(m));	/* just to make debug clearer */
 
drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.h +3 -0
@@ -71,6 +71,9 @@ struct vchiq_mmal_port {
 	struct list_head buffers;
 	/* lock to serialise adding and removing buffers from list */
 	spinlock_t slock;
+
+	/* Count of buffers the VPU has yet to return */
+	atomic_t buffers_with_vpu;
 	/* callback on buffer completion */
 	vchiq_mmal_buffer_cb buffer_cb;
 	/* callback context */
author maintainer
#89 lore raw

PATCH 89/91 staging: bcm2835-camera: Remove check of the number of buffers supplied

In reply to Greg Kroah-Hartman

From: Dave Stevenson <[email protected]>

commit bb8e97006d701ae725a177f8f322e5a75fa761b7 upstream.

Before commit "staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping" there was a need to ensure that there were sufficient buffers supplied from the user to cover those being sent to the VPU (always 1).

Now the buffers are linked 1:1 between MMAL and V4L2, therefore there is no need for that check, and indeed it is wrong as there is no need to submit all the buffers before starting streaming.

Fixes 938416707071 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping")
---
 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c |   10 ----------
 1 file changed, 10 deletions(-)
drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c +0 -10
@@ -1329,16 +1329,6 @@ static int port_enable(struct vchiq_mmal
 	if (port->enabled)
 		return 0;
 
-	/* ensure there are enough buffers queued to cover the buffer headers */
-	if (port->buffer_cb) {
-		hdr_count = 0;
-		list_for_each(buf_head, &port->buffers) {
-			hdr_count++;
-		}
-		if (hdr_count < port->current_buffer.num)
-			return -ENOSPC;
-	}
-
 	ret = port_action_port(instance, port,
 			       MMAL_MSG_PORT_ACTION_TYPE_ENABLE);
 	if (ret)
author maintainer
#90 lore raw

PATCH 90/91 staging: bcm2835-camera: Handle empty EOS buffers whilst streaming

In reply to Greg Kroah-Hartman

From: Dave Stevenson <[email protected]>

commit a26be06d6d96c10a9ab005e99d93fbb5d3babd98 upstream.

The change to mapping V4L2 to MMAL buffers 1:1 didn't handle the condition we get with raw pixel buffers (eg YUV and RGB) direct from the camera's stills port. That sends the pixel buffer and then an empty buffer with the EOS flag set. The EOS buffer wasn't handled and returned an error up the stack.

Handle the condition correctly by returning it to the component if streaming, or returning with an error if stopping streaming.

Fixes 938416707071 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping")
---
 drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c |   21 +++++-----
 drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c     |    5 +-
 2 files changed, 15 insertions(+), 11 deletions(-)
drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c +12 -9
@@ -342,16 +342,13 @@ static void buffer_cb(struct vchiq_mmal_
 		return;
 	} else if (length == 0) {
 		/* stream ended */
-		if (buf) {
-			/* this should only ever happen if the port is
-			 * disabled and there are buffers still queued
+		if (dev->capture.frame_count) {
+			/* empty buffer whilst capturing - expected to be an
+			 * EOS, so grab another frame
 			 */
-			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
-			pr_debug("Empty buffer");
-		} else if (dev->capture.frame_count) {
-			/* grab another frame */
 			if (is_capturing(dev)) {
-				pr_debug("Grab another frame");
+				v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+					 "Grab another frame");
 				vchiq_mmal_port_parameter_set(
 					instance,
 					dev->capture.camera_port,
@@ -359,8 +356,14 @@ static void buffer_cb(struct vchiq_mmal_
 					&dev->capture.frame_count,
 					sizeof(dev->capture.frame_count));
 			}
+			if (vchiq_mmal_submit_buffer(instance, port, buf))
+				v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+					 "Failed to return EOS buffer");
 		} else {
-			/* signal frame completion */
+			/* stopping streaming.
+			 * return buffer, and signal frame completion
+			 */
+			vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
 			complete(&dev->capture.frame_cmplt);
 		}
 	} else {
drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c +3 -2
@@ -291,8 +291,6 @@ static int bulk_receive(struct vchiq_mma
 
 	/* store length */
 	msg_context->u.bulk.buffer_used = rd_len;
-	msg_context->u.bulk.mmal_flags =
-	    msg->u.buffer_from_host.buffer_header.flags;
 	msg_context->u.bulk.dts = msg->u.buffer_from_host.buffer_header.dts;
 	msg_context->u.bulk.pts = msg->u.buffer_from_host.buffer_header.pts;
 
@@ -453,6 +451,9 @@ static void buffer_to_host_cb(struct vch
 		return;
 	}
 
+	msg_context->u.bulk.mmal_flags =
+				msg->u.buffer_from_host.buffer_header.flags;
+
 	if (msg->h.status != MMAL_MSG_STATUS_SUCCESS) {
 		/* message reception had an error */
 		pr_warn("error %d in reply\n", msg->h.status);
author maintainer
#91 lore raw

PATCH 91/91 staging: rtl8712: reduce stack usage, again

In reply to Greg Kroah-Hartman

From: Arnd Bergmann <[email protected]>

commit fbd6b25009ac76b2034168cd21d5e01f8c2d83d1 upstream.

An earlier patch I sent reduced the stack usage enough to get below the warning limit, and I could show this was safe, but with GCC_PLUGIN_STRUCTLEAK_BYREF_ALL, it gets worse again because large stack variables in the same function no longer overlap:

drivers/staging/rtl8712/rtl871x_ioctl_linux.c: In function 'translate_scan.isra.2':
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:322:1: error: the frame size of 1200 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

Split out the largest two blocks in the affected function into two separate functions and mark those noinline_for_stack.

Fixes 8c5af16f7953 ("staging: rtl8712: reduce stack usage")
Fixes 81a56f6dcd20 ("gcc-plugins: structleak: Generalize to all variable types")
---
 drivers/staging/rtl8712/rtl871x_ioctl_linux.c |  159 ++++++++++++++------------
 1 file changed, 89 insertions(+), 70 deletions(-)
drivers/staging/rtl8712/rtl871x_ioctl_linux.c +89 -70
@@ -141,10 +141,91 @@ static inline void handle_group_key(stru
 	}
 }
 
-static noinline_for_stack char *translate_scan(struct _adapter *padapter,
-				   struct iw_request_info *info,
-				   struct wlan_network *pnetwork,
-				   char *start, char *stop)
+static noinline_for_stack char *translate_scan_wpa(struct iw_request_info *info,
+						   struct wlan_network *pnetwork,
+						   struct iw_event *iwe,
+						   char *start, char *stop)
+{
+	/* parsing WPA/WPA2 IE */
+	u8 buf[MAX_WPA_IE_LEN];
+	u8 wpa_ie[255], rsn_ie[255];
+	u16 wpa_len = 0, rsn_len = 0;
+	int n, i;
+
+	r8712_get_sec_ie(pnetwork->network.IEs,
+			 pnetwork->network.IELength, rsn_ie, &rsn_len,
+			 wpa_ie, &wpa_len);
+	if (wpa_len > 0) {
+		memset(buf, 0, MAX_WPA_IE_LEN);
+		n = sprintf(buf, "wpa_ie=");
+		for (i = 0; i < wpa_len; i++) {
+			n += snprintf(buf + n, MAX_WPA_IE_LEN - n,
+						"%02x", wpa_ie[i]);
+			if (n >= MAX_WPA_IE_LEN)
+				break;
+		}
+		memset(iwe, 0, sizeof(*iwe));
+		iwe->cmd = IWEVCUSTOM;
+		iwe->u.data.length = (u16)strlen(buf);
+		start = iwe_stream_add_point(info, start, stop,
+			iwe, buf);
+		memset(iwe, 0, sizeof(*iwe));
+		iwe->cmd = IWEVGENIE;
+		iwe->u.data.length = (u16)wpa_len;
+		start = iwe_stream_add_point(info, start, stop,
+			iwe, wpa_ie);
+	}
+	if (rsn_len > 0) {
+		memset(buf, 0, MAX_WPA_IE_LEN);
+		n = sprintf(buf, "rsn_ie=");
+		for (i = 0; i < rsn_len; i++) {
+			n += snprintf(buf + n, MAX_WPA_IE_LEN - n,
+						"%02x", rsn_ie[i]);
+			if (n >= MAX_WPA_IE_LEN)
+				break;
+		}
+		memset(iwe, 0, sizeof(*iwe));
+		iwe->cmd = IWEVCUSTOM;
+		iwe->u.data.length = strlen(buf);
+		start = iwe_stream_add_point(info, start, stop,
+			iwe, buf);
+		memset(iwe, 0, sizeof(*iwe));
+		iwe->cmd = IWEVGENIE;
+		iwe->u.data.length = rsn_len;
+		start = iwe_stream_add_point(info, start, stop, iwe,
+			rsn_ie);
+	}
+
+	return start;
+}
+
+static noinline_for_stack char *translate_scan_wps(struct iw_request_info *info,
+						   struct wlan_network *pnetwork,
+						   struct iw_event *iwe,
+						   char *start, char *stop)
+{
+	/* parsing WPS IE */
+	u8 wps_ie[512];
+	uint wps_ielen;
+
+	if (r8712_get_wps_ie(pnetwork->network.IEs,
+	    pnetwork->network.IELength,
+	    wps_ie, &wps_ielen)) {
+		if (wps_ielen > 2) {
+			iwe->cmd = IWEVGENIE;
+			iwe->u.data.length = (u16)wps_ielen;
+			start = iwe_stream_add_point(info, start, stop,
+				iwe, wps_ie);
+		}
+	}
+
+	return start;
+}
+
+static char *translate_scan(struct _adapter *padapter,
+			    struct iw_request_info *info,
+			    struct wlan_network *pnetwork,
+			    char *start, char *stop)
 {
 	struct iw_event iwe;
 	struct ieee80211_ht_cap *pht_capie;
@@ -257,73 +338,11 @@ static noinline_for_stack char *translat
 	/* Check if we added any event */
 	if ((current_val - start) > iwe_stream_lcp_len(info))
 		start = current_val;
-	/* parsing WPA/WPA2 IE */
-	{
-		u8 buf[MAX_WPA_IE_LEN];
-		u8 wpa_ie[255], rsn_ie[255];
-		u16 wpa_len = 0, rsn_len = 0;
-		int n;
-
-		r8712_get_sec_ie(pnetwork->network.IEs,
-				 pnetwork->network.IELength, rsn_ie, &rsn_len,
-				 wpa_ie, &wpa_len);
-		if (wpa_len > 0) {
-			memset(buf, 0, MAX_WPA_IE_LEN);
-			n = sprintf(buf, "wpa_ie=");
-			for (i = 0; i < wpa_len; i++) {
-				n += snprintf(buf + n, MAX_WPA_IE_LEN - n,
-							"%02x", wpa_ie[i]);
-				if (n >= MAX_WPA_IE_LEN)
-					break;
-			}
-			memset(&iwe, 0, sizeof(iwe));
-			iwe.cmd = IWEVCUSTOM;
-			iwe.u.data.length = (u16)strlen(buf);
-			start = iwe_stream_add_point(info, start, stop,
-				&iwe, buf);
-			memset(&iwe, 0, sizeof(iwe));
-			iwe.cmd = IWEVGENIE;
-			iwe.u.data.length = (u16)wpa_len;
-			start = iwe_stream_add_point(info, start, stop,
-				&iwe, wpa_ie);
-		}
-		if (rsn_len > 0) {
-			memset(buf, 0, MAX_WPA_IE_LEN);
-			n = sprintf(buf, "rsn_ie=");
-			for (i = 0; i < rsn_len; i++) {
-				n += snprintf(buf + n, MAX_WPA_IE_LEN - n,
-							"%02x", rsn_ie[i]);
-				if (n >= MAX_WPA_IE_LEN)
-					break;
-			}
-			memset(&iwe, 0, sizeof(iwe));
-			iwe.cmd = IWEVCUSTOM;
-			iwe.u.data.length = strlen(buf);
-			start = iwe_stream_add_point(info, start, stop,
-				&iwe, buf);
-			memset(&iwe, 0, sizeof(iwe));
-			iwe.cmd = IWEVGENIE;
-			iwe.u.data.length = rsn_len;
-			start = iwe_stream_add_point(info, start, stop, &iwe,
-				rsn_ie);
-		}
-	}
 
-	{ /* parsing WPS IE */
-		u8 wps_ie[512];
-		uint wps_ielen;
-
-		if (r8712_get_wps_ie(pnetwork->network.IEs,
-		    pnetwork->network.IELength,
-		    wps_ie, &wps_ielen)) {
-			if (wps_ielen > 2) {
-				iwe.cmd = IWEVGENIE;
-				iwe.u.data.length = (u16)wps_ielen;
-				start = iwe_stream_add_point(info, start, stop,
-					&iwe, wps_ie);
-			}
-		}
-	}
+	start = translate_scan_wpa(info, pnetwork, &iwe, start, stop);
+
+	start = translate_scan_wps(info, pnetwork, &iwe, start, stop);
+
 	/* Add quality statistics */
 	iwe.cmd = IWEVQUAL;
 	rssi = r8712_signal_scale_mapping(pnetwork->network.Rssi);
maintainer
#92 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.59 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.59-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

All tests are passing for Tegra ...

Test results for stable-v4.19:

    12 builds:	12 pass, 0 fail
    22 boots:	22 pass, 0 fail
    32 tests:	32 pass, 0 fail

Linux version: 4.19.59-rc1-gd66f8e7f112f
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

Signature · 1 line
nvpublic
#93 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.59 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.59-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

#94 lore raw
In reply to Greg Kroah-Hartman
stable-rc/linux-4.19.y boot: 122 boots: 4 failed, 117 passed with 1 offline (v4.19.58-92-gd66f8e7f112f)

stable-rc/linux-4.19.y boot: 122 boots: 4 failed, 117 passed with 1 offline (v4.19.58-92-gd66f8e7f112f)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.19.y/kernel/v4.19.58-92-gd66f8e7f112f/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.19.y/kernel/v4.19.58-92-gd66f8e7f112f/

Tree: stable-rc
Branch: linux-4.19.y
Git Describe: v4.19.58-92-gd66f8e7f112f
Git Commit: d66f8e7f112fefe0c1d2a0f77da022a56ccde6dc
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 70 unique boards, 27 SoC families, 17 builds out of 206

Boot Regressions Detected:

arm64:

    defconfig:
        gcc-8:
          meson-gxbb-nanopi-k2:
              lab-baylibre: new failure (last pass: v4.19.58)

Boot Failures Detected:

arm:
multi_v7_defconfig:
gcc-8:
sun7i-a20-bananapi: 1 failed lab

sunxi_defconfig:
gcc-8:
sun7i-a20-bananapi: 1 failed lab

arm64:
defconfig:
gcc-8:
meson-gxbb-nanopi-k2: 1 failed lab

arc:
hsdk_defconfig:
gcc-8:
hsdk: 1 failed lab

Offline Platforms:

arm64:

    defconfig:
        gcc-8
            meson-gxl-s905d-p230: 1 offline lab

---
For more info write to <[email protected]>

#95 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.59 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
        https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.59-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.19.59-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: d66f8e7f112fefe0c1d2a0f77da022a56ccde6dc
git describe: v4.19.58-92-gd66f8e7f112f
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.58-92-gd66f8e7f112f

No regressions (compared to build v4.19.58)

No fixes (compared to build v4.19.58)

Ran 25278 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libgpiod
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-fs-tests
* network-basic-tests
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

Signature · 2 lines
Linaro LKFT
https://lkft.linaro.org
#96 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.59 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.59-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my x86_64 system. No dmesg regressions.

Thanks,

Luke

#97 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.59 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC. Anything received after that time might be too late.

For v4.19.58-91-g778a2640e781:

Build results:

	total: 156 pass: 156 fail: 0
Qemu test results:
	total: 364 pass: 364 fail: 0

Guenter

#98 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.59 release. There are 91 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun 14 Jul 2019 12:14:36 PM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.59-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted with no regressions on my system.

Cheers,
Kelsey