Refactor the architecture parts of mt7628
v2 cover Refactor the architecture parts of mt7628
This patch series are divided into two parts:
The main part is to rewrite the whole architecture code of mt7628:
1. Lock parts of the d-cache for initial stack so the rest of the code can be reimplemented in C.
2. Memory controller & DDR initialization have been fully written to support detecting DDR size automatically.
3. DDR calibration has also been reimplemented with a clear logic.
4. Implemented a new sysreset driver to take advantage of the reset controller so we can drop the use of syscon-based sysreset to reduce size.
The second part is to add SPL support for mt7628:
1. With SPL enabled we can build the ROM-bootable and RAM-bootable binary simultaneously, and we can drop RAM boot related configs and defconfig files.
2. Generate compressed u-boot.bin image for SPL to reduce size of final combined binary.
3. Enable DM support for SPL for a more flexible device probing.
4. Add a demo board (mt7628_rfb) aims at router application.
Changes since v1:
1. Split 'mips: mtmips: rewrite lowlevel codes of mt7628' into multiple patches.
2. Dropped a patch which tried to use customized get_tbclk().
3. Dropped a patch which tried to rename mt7628a.dtsi to mt7628.dtsi
4. Refactor the patch which restores exception vector base before booting linux.
5. Define a new option to enable u_boot_list in SPL.
6. Enable compressed spl payload for all boards.
7. Enable DM and DT support for linkit and gardena-smart-gateway.
8. Complete pinmux for all three UARTs for SPL.
9. Rewrite u_boot_lzma_img.py.
Weijie Gao (21):
mips: add support to restore exception vector base before booting
linux
mips: mtmips: add predefined i-cache/d-cache size and linesize
mips: add an option to support initialize SRAM for initial stack
mips: start.S: avoid overwriting outside gd when clearing global data
in stack
sysreset: add reset controller based reboot driver
mips: mtmips: make use of sysreset-resetctrl for mt7628 soc
configs: enable CONFIG_RESTORE_EXCEPTION_VECTOR_BASE for all mtmips
boards
mips: add a mtmips-specific field to architecture-specific global data
mips: add a option to support not reserving malloc space on initial
stack
mips: mtmips: rewrite lowlevel codes of mt7628
dts: mtmips: remove all unusable nodes and properties from
mt7628s.dtsi
dts: mtmips: add u-boot,dm-pre-reloc for some nodes in mt7628a.dtsi
dts: mtmips: add alternative pinmux node for uart2
mips: enable support for appending dtb to spl binary
mips: add an option to enable u_boot_list section for SPL loaders in
u-boot-spl.lds
lib: enable lzma decompression support for SPL build
Makefile: add support to generate LZMA compressed u-boot image
tools: binman: add etype file for u-boot-lzma-img
mips: mtmips: add SPL support
mips: mtmips: enable SPL for all boards
mips: mtmips: add support for mt7628-rfb
Makefile | 22 ++ arch/mips/Kconfig | 60 ++++ arch/mips/cpu/start.S | 16 +- arch/mips/cpu/u-boot-spl.lds | 4 +- arch/mips/dts/Makefile | 1 + arch/mips/dts/mediatek,mt7628-rfb.dts | 67 ++++ arch/mips/dts/mt7628-u-boot.dtsi | 24 ++ arch/mips/dts/mt7628a.dtsi | 93 ++--- arch/mips/include/asm/global_data.h | 3 + arch/mips/include/asm/u-boot-mips.h | 2 + arch/mips/lib/bootm.c | 3 + arch/mips/lib/traps.c | 19 + arch/mips/mach-mtmips/Kconfig | 133 +++---- arch/mips/mach-mtmips/Makefile | 8 +- arch/mips/mach-mtmips/cpu.c | 58 +--- arch/mips/mach-mtmips/ddr_cal.c | 211 +++++++++++ arch/mips/mach-mtmips/ddr_calibrate.c | 309 ----------------- arch/mips/mach-mtmips/ddr_init.c | 194 +++++++++++ arch/mips/mach-mtmips/include/mach/ddr.h | 52 +++ arch/mips/mach-mtmips/include/mach/mc.h | 180 ++++++++++ arch/mips/mach-mtmips/include/mach/serial.h | 13 + arch/mips/mach-mtmips/include/mach/spl.h | 14 + arch/mips/mach-mtmips/lowlevel_init.S | 328 ------------------ arch/mips/mach-mtmips/mt7628/Makefile | 6 + arch/mips/mach-mtmips/mt7628/ddr.c | 173 +++++++++ arch/mips/mach-mtmips/mt7628/init.c | 109 ++++++ arch/mips/mach-mtmips/mt7628/lowlevel_init.S | 161 +++++++++ arch/mips/mach-mtmips/mt7628/mt7628.h | 104 ++++++ arch/mips/mach-mtmips/mt7628/serial.c | 34 ++ arch/mips/mach-mtmips/mt76xx.h | 32 -- arch/mips/mach-mtmips/spl.c | 35 ++ arch/mips/mach-mtmips/spl_load.c | 121 +++++++ board/gardena/smart-gateway-mt7688/board.c | 2 + board/mediatek/mt7628/Kconfig | 12 + board/mediatek/mt7628/MAINTAINERS | 7 + board/mediatek/mt7628/Makefile | 3 + board/mediatek/mt7628/board.c | 8 + ...gardena-smart-gateway-mt7688-ram_defconfig | 74 ---- .../gardena-smart-gateway-mt7688_defconfig | 15 +- configs/linkit-smart-7688-ram_defconfig | 65 ---- configs/linkit-smart-7688_defconfig | 15 +- configs/mt7628_rfb_defconfig | 45 +++ drivers/sysreset/Kconfig | 6 + drivers/sysreset/Makefile | 1 + drivers/sysreset/sysreset_resetctl.c | 48 +++ .../configs/gardena-smart-gateway-mt7688.h | 18 +- include/configs/linkit-smart-7688.h | 19 +- include/configs/mt7628.h | 52 +++ lib/Kconfig | 5 + lib/Makefile | 1 + tools/binman/README.entries | 15 + tools/binman/etype/u_boot_lzma_img.py | 28 ++ 52 files changed, 1987 insertions(+), 1041 deletions(-) create mode 100644 arch/mips/dts/mediatek,mt7628-rfb.dts create mode 100644 arch/mips/dts/mt7628-u-boot.dtsi create mode 100644 arch/mips/mach-mtmips/ddr_cal.c delete mode 100644 arch/mips/mach-mtmips/ddr_calibrate.c create mode 100644 arch/mips/mach-mtmips/ddr_init.c create mode 100644 arch/mips/mach-mtmips/include/mach/ddr.h create mode 100644 arch/mips/mach-mtmips/include/mach/mc.h create mode 100644 arch/mips/mach-mtmips/include/mach/serial.h create mode 100644 arch/mips/mach-mtmips/include/mach/spl.h delete mode 100644 arch/mips/mach-mtmips/lowlevel_init.S create mode 100644 arch/mips/mach-mtmips/mt7628/Makefile create mode 100644 arch/mips/mach-mtmips/mt7628/ddr.c create mode 100644 arch/mips/mach-mtmips/mt7628/init.c create mode 100644 arch/mips/mach-mtmips/mt7628/lowlevel_init.S create mode 100644 arch/mips/mach-mtmips/mt7628/mt7628.h create mode 100644 arch/mips/mach-mtmips/mt7628/serial.c delete mode 100644 arch/mips/mach-mtmips/mt76xx.h create mode 100644 arch/mips/mach-mtmips/spl.c create mode 100644 arch/mips/mach-mtmips/spl_load.c create mode 100644 board/mediatek/mt7628/Kconfig create mode 100644 board/mediatek/mt7628/MAINTAINERS create mode 100644 board/mediatek/mt7628/Makefile create mode 100644 board/mediatek/mt7628/board.c delete mode 100644 configs/gardena-smart-gateway-mt7688-ram_defconfig delete mode 100644 configs/linkit-smart-7688-ram_defconfig create mode 100644 configs/mt7628_rfb_defconfig create mode 100644 drivers/sysreset/sysreset_resetctl.c create mode 100644 include/configs/mt7628.h create mode 100644 tools/binman/etype/u_boot_lzma_img.py
Signature · 1 line
2.17.1
v2 cover Refactor the architecture parts of mt7628
Hi Weijie,
I've added another of my mail addresses to cc (mail at roese.nl) as the sending to the other 2 addresses does not seem to work.
Quoted 31 lines · Weijie Gao
This patch series are divided into two parts:
The main part is to rewrite the whole architecture code of mt7628:
1. Lock parts of the d-cache for initial stack so the rest of the code can be reimplemented in C.
2. Memory controller & DDR initialization have been fully written to support detecting DDR size automatically.
3. DDR calibration has also been reimplemented with a clear logic.
4. Implemented a new sysreset driver to take advantage of the reset controller so we can drop the use of syscon-based sysreset to reduce size.The second part is to add SPL support for mt7628:
1. With SPL enabled we can build the ROM-bootable and RAM-bootable binary simultaneously, and we can drop RAM boot related configs and defconfig files.
2. Generate compressed u-boot.bin image for SPL to reduce size of final combined binary.
3. Enable DM support for SPL for a more flexible device probing.
4. Add a demo board (mt7628_rfb) aims at router application.Changes since v1:
1. Split 'mips: mtmips: rewrite lowlevel codes of mt7628' into multiple patches.
2. Dropped a patch which tried to use customizedget_tbclk().
3. Dropped a patch which tried to renamemt7628a.dtsitomt7628.dtsi
4. Refactor the patch which restores exception vector base before booting linux.
5. Define a new option to enableu_boot_listin SPL.
6. Enable compressed spl payload for all boards.
7. Enable DM and DT support for linkit and gardena-smart-gateway.
8. Complete pinmux for all three UARTs for SPL.
9. Rewriteu_boot_lzma_img.py.
Quoted 1 line
Weijie Gao (21):
It seems that patch 09/21 is missing on the list. Is it stuck in moderation? Or is the patch numbering corrupt?
Thanks,
Stefan
v2 cover Refactor the architecture parts of mt7628
Quoted 37 lines · Stefan Roese
Hi Weijie,
I've added another of my mail addresses to cc (mail at roese.nl) as the sending to the other 2 addresses does not seem to work.
Quoted 31 lines · Weijie Gao
This patch series are divided into two parts:
The main part is to rewrite the whole architecture code of mt7628:
1. Lock parts of the d-cache for initial stack so the rest of the code can be reimplemented in C.
2. Memory controller & DDR initialization have been fully written to support detecting DDR size automatically.
3. DDR calibration has also been reimplemented with a clear logic.
4. Implemented a new sysreset driver to take advantage of the reset controller so we can drop the use of syscon-based sysreset to reduce size.The second part is to add SPL support for mt7628:
1. With SPL enabled we can build the ROM-bootable and RAM-bootable binary simultaneously, and we can drop RAM boot related configs and defconfig files.
2. Generate compressed u-boot.bin image for SPL to reduce size of final combined binary.
3. Enable DM support for SPL for a more flexible device probing.
4. Add a demo board (mt7628_rfb) aims at router application.Changes since v1:
1. Split 'mips: mtmips: rewrite lowlevel codes of mt7628' into multiple patches.
2. Dropped a patch which tried to use customizedget_tbclk().
3. Dropped a patch which tried to renamemt7628a.dtsitomt7628.dtsi
4. Refactor the patch which restores exception vector base before booting linux.
5. Define a new option to enableu_boot_listin SPL.
6. Enable compressed spl payload for all boards.
7. Enable DM and DT support for linkit and gardena-smart-gateway.
8. Complete pinmux for all three UARTs for SPL.
9. Rewriteu_boot_lzma_img.py.
Quoted 7 lines
Quoted 1 line
Weijie Gao (21):
It seems that patch 09/21 is missing on the list. Is it stuck in moderation? Or is the patch numbering corrupt?
Thanks,
Stefan
It's missing on my list. I've resent it.
v2 cover Refactor the architecture parts of mt7628
Hi Weijie,
Quoted 40 lines · Weijie Gao
Quoted 39 lines · Stefan Roese
Hi Weijie,
I've added another of my mail addresses to cc (mail at roese.nl) as the sending to the other 2 addresses does not seem to work.
Quoted 32 lines · Weijie Gao
This patch series are divided into two parts:
The main part is to rewrite the whole architecture code of mt7628:
1. Lock parts of the d-cache for initial stack so the rest of the code can be reimplemented in C.
2. Memory controller & DDR initialization have been fully written to support detecting DDR size automatically.
3. DDR calibration has also been reimplemented with a clear logic.
4. Implemented a new sysreset driver to take advantage of the reset controller so we can drop the use of syscon-based sysreset to reduce size.The second part is to add SPL support for mt7628:
1. With SPL enabled we can build the ROM-bootable and RAM-bootable binary simultaneously, and we can drop RAM boot related configs and defconfig files.
2. Generate compressed u-boot.bin image for SPL to reduce size of final combined binary.
3. Enable DM support for SPL for a more flexible device probing.
4. Add a demo board (mt7628_rfb) aims at router application.Changes since v1:
1. Split 'mips: mtmips: rewrite lowlevel codes of mt7628' into multiple patches.
2. Dropped a patch which tried to use customizedget_tbclk().
3. Dropped a patch which tried to renamemt7628a.dtsitomt7628.dtsi
4. Refactor the patch which restores exception vector base before booting linux.
5. Define a new option to enableu_boot_listin SPL.
6. Enable compressed spl payload for all boards.
7. Enable DM and DT support for linkit and gardena-smart-gateway.
8. Complete pinmux for all three UARTs for SPL.
9. Rewriteu_boot_lzma_img.py.Weijie Gao (21):
Quoted 7 lines
Quoted 5 lines
It seems that patch 09/21 is missing on the list. Is it stuck in moderation? Or is the patch numbering corrupt?
Thanks,
StefanIt's missing on my list. I've resent it.
Thanks. Applying this patchset on top of current mainline results in this compilation error (using linkit-smart-7688_defconfig):
arch/mips/mach-mtmips/built-in.o: In function `get_tbclk':/home/stefan/git/u-boot/u-boot/arch/mips/mach-mtmips/mt7628/init.c:108: multiple definition of `get_tbclk' arch/mips/cpu/built-in.o:/home/stefan/git/u-boot/u-boot/arch/mips/cpu/time.c:18: first defined here
make: *** [Makefile:1695: u-boot] Error 1
Is something else missing?
Thanks,
Stefan
v2 cover Refactor the architecture parts of mt7628
Quoted 54 lines · Stefan Roese
Hi Weijie,
Quoted 40 lines · Weijie Gao
Quoted 39 lines · Stefan Roese
Hi Weijie,
I've added another of my mail addresses to cc (mail at roese.nl) as the sending to the other 2 addresses does not seem to work.
Quoted 32 lines · Weijie Gao
This patch series are divided into two parts:
The main part is to rewrite the whole architecture code of mt7628:
1. Lock parts of the d-cache for initial stack so the rest of the code can be reimplemented in C.
2. Memory controller & DDR initialization have been fully written to support detecting DDR size automatically.
3. DDR calibration has also been reimplemented with a clear logic.
4. Implemented a new sysreset driver to take advantage of the reset controller so we can drop the use of syscon-based sysreset to reduce size.The second part is to add SPL support for mt7628:
1. With SPL enabled we can build the ROM-bootable and RAM-bootable binary simultaneously, and we can drop RAM boot related configs and defconfig files.
2. Generate compressed u-boot.bin image for SPL to reduce size of final combined binary.
3. Enable DM support for SPL for a more flexible device probing.
4. Add a demo board (mt7628_rfb) aims at router application.Changes since v1:
1. Split 'mips: mtmips: rewrite lowlevel codes of mt7628' into multiple patches.
2. Dropped a patch which tried to use customizedget_tbclk().
3. Dropped a patch which tried to renamemt7628a.dtsitomt7628.dtsi
4. Refactor the patch which restores exception vector base before booting linux.
5. Define a new option to enableu_boot_listin SPL.
6. Enable compressed spl payload for all boards.
7. Enable DM and DT support for linkit and gardena-smart-gateway.
8. Complete pinmux for all three UARTs for SPL.
9. Rewriteu_boot_lzma_img.py.Weijie Gao (21):
Quoted 7 lines
Quoted 5 lines
It seems that patch 09/21 is missing on the list. Is it stuck in moderation? Or is the patch numbering corrupt?
Thanks,
StefanIt's missing on my list. I've resent it.
Thanks. Applying this patchset on top of current mainline results in this compilation error (using linkit-smart-7688_defconfig):
Quoted 6 lines
arch/mips/mach-mtmips/built-in.o: In function `get_tbclk':/home/stefan/git/u-boot/u-boot/arch/mips/mach-mtmips/mt7628/init.c:108: multiple definition of `get_tbclk' arch/mips/cpu/built-in.o:/home/stefan/git/u-boot/u-boot/arch/mips/cpu/time.c:18: first defined here
make: *** [Makefile:1695: u-boot] Error 1Is something else missing?
Okay, I think I found it. This patch here is missing:
https://patchwork.ozlabs.org/patch/1215073/
Thanks,
Stefan
v2 cover Refactor the architecture parts of mt7628
In reply to Stefan RoeseQuoted 59 lines · Stefan Roese
Hi Weijie,
Quoted 40 lines · Weijie Gao
Quoted 39 lines · Stefan Roese
Hi Weijie,
I've added another of my mail addresses to cc (mail at roese.nl) as the sending to the other 2 addresses does not seem to work.
Quoted 32 lines · Weijie Gao
This patch series are divided into two parts:
The main part is to rewrite the whole architecture code of mt7628:
1. Lock parts of the d-cache for initial stack so the rest of the code can be reimplemented in C.
2. Memory controller & DDR initialization have been fully written to support detecting DDR size automatically.
3. DDR calibration has also been reimplemented with a clear logic.
4. Implemented a new sysreset driver to take advantage of the reset controller so we can drop the use of syscon-based sysreset to reduce size.The second part is to add SPL support for mt7628:
1. With SPL enabled we can build the ROM-bootable and RAM-bootable binary simultaneously, and we can drop RAM boot related configs and defconfig files.
2. Generate compressed u-boot.bin image for SPL to reduce size of final combined binary.
3. Enable DM support for SPL for a more flexible device probing.
4. Add a demo board (mt7628_rfb) aims at router application.Changes since v1:
1. Split 'mips: mtmips: rewrite lowlevel codes of mt7628' into multiple patches.
2. Dropped a patch which tried to use customizedget_tbclk().
3. Dropped a patch which tried to renamemt7628a.dtsitomt7628.dtsi
4. Refactor the patch which restores exception vector base before booting linux.
5. Define a new option to enableu_boot_listin SPL.
6. Enable compressed spl payload for all boards.
7. Enable DM and DT support for linkit and gardena-smart-gateway.
8. Complete pinmux for all three UARTs for SPL.
9. Rewriteu_boot_lzma_img.py.Weijie Gao (21):
Quoted 7 lines
Quoted 5 lines
It seems that patch 09/21 is missing on the list. Is it stuck in moderation? Or is the patch numbering corrupt?
Thanks,
StefanIt's missing on my list. I've resent it.
Thanks. Applying this patchset on top of current mainline results in this compilation error (using linkit-smart-7688_defconfig):
arch/mips/mach-mtmips/built-in.o: In function `get_tbclk':/home/stefan/git/u-boot/u-boot/arch/mips/mach-mtmips/mt7628/init.c:108: multiple definition of `get_tbclk' arch/mips/cpu/built-in.o:/home/stefan/git/u-boot/u-boot/arch/mips/cpu/time.c:18: first defined here
make: *** [Makefile:1695: u-boot] Error 1
Quoted 4 lines
Is something else missing?
Thanks,
Stefan
Daniel said he has merged a patch which makes the original get_tbclk weak (arch/mips/cpu/time.c), and let me drop a related patch.
https://patchwork.ozlabs.org/patch/1215073/
I haven't seen it shown in mainline yet.