Skip to contentSkip to conversation

hda_analyzer vs alc668 asus NJ750k

DISCUSSION Patrick Shirkey 3 participants 4 messages Jul 29, 2014 – Jul 30, 2014

lore
Share & tools
lore
#0 lore raw

Hi,

I get some errors running hda_analyzer with this alc668 chipset.

Traceback (most recent call last):
File "/dev/shm/hda-analyzer/hda_analyzer.py", line 546, in <module>
sys.exit(main(sys.argv))
File "/dev/shm/hda-analyzer/hda_analyzer.py", line 523, in main

    if read_nodes(sys.argv[1:]) == 0:
  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 89, in read_nodes
    read_nodes2(c.card, i)
  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 60, in read_nodes2
    c = HDACodec(card, codec)
  File "/dev/shm/hda-analyzer/hda_codec.py", line 1041, in __init__
    self.parse_proc()
  File "/dev/shm/hda-analyzer/hda_codec.py", line 1140, in parse_proc
    self.proc_codec = HDACodecProc(self.card, self.device, file)
  File "/dev/shm/hda-analyzer/hda_proc.py", line 479, in __init__
    self.parse(proc_file)
  File "/dev/shm/hda-analyzer/hda_proc.py", line 677, in parse
    node.add_digital(line[11:])

File "/dev/shm/hda-analyzer/hda_proc.py", line 296, in add_digital
self.wrongfile('unknown dig1 bit %s' % repr(b))
File "/dev/shm/hda-analyzer/hda_proc.py", line 143, in wrongfile
raise ValueError, "wrong proc file format (%s)" % msg
ValueError: wrong proc file format (unknown dig1 bit 'KAE')

If I disable the check for add_digital I get this error:

ValueError: wrong proc file format ( Digital: Enabled KAE)

- Is it a problem to add a new DIG1_BIT to hda_proc.py:277

def add_digital(self, line):

    bits = {
      'Enabled': DIG1_BITS['ENABLE'],
      'Validity': DIG1_BITS['VALIDITY'],
      'ValidityCfg': DIG1_BITS['VALIDITYCFG'],
      'Preemphasis': DIG1_BITS['EMPHASIS'],
      'Copyright': DIG1_BITS['COPYRIGHT'], # old buggy format
      'Non-Copyright': DIG1_BITS['COPYRIGHT'],
      'Non-Audio': DIG1_BITS['NONAUDIO'],
      'Pro': DIG1_BITS['PROFESSIONAL'],
      'GenLevel': DIG1_BITS['LEVEL'],
      'KAE': DIG1_BITS['KAE'],
    }

hda_codec.py:224

DIG1_BITS = {
'ENABLE': 0,
'VALIDITY': 1,
'VALIDITYCFG': 2,
'EMPHASIS': 3,
'COPYRIGHT': 4,
'NONAUDIO': 5,
'PROFESSIONAL': 6,
'LEVEL': 7,
'KAE': 8
}

- If I do that I get this error:

Traceback (most recent call last):
File "hda_analyzer.py", line 546, in <module>
sys.exit(main(sys.argv))
File "hda_analyzer.py", line 523, in main

    if read_nodes(sys.argv[1:]) == 0:
  File "hda_analyzer.py", line 89, in read_nodes
    read_nodes2(c.card, i)

File "hda_analyzer.py", line 60, in read_nodes2
c = HDACodec(card, codec)
File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_codec.py", line
1043, in __init__
self.parse_proc()
File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_codec.py", line
1142, in parse_proc
self.proc_codec = HDACodecProc(self.card, self.device, file)
File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line
480, in __init__
self.parse(proc_file)
File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line
732, in parse
self.wrongfile(line)
File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line
143, in wrongfile
raise ValueError, "wrong proc file format (%s)" % msg
ValueError: wrong proc file format ( Devices: 0)

- If I replace the call in hda_proc.py:734 to self.wrongfile() with a print command

ex.
else:
print ('strange line : %s' % line)
# self.wrongfile(line)

I get this output and hda_analyzer interface starts:

# python hda_analyzer.py
strange line :   Devices: 0
strange line :   In-driver Connection: 3
strange line :      0x02 0x03 0x04
strange line :   Devices: 0
strange line :   In-driver Connection: 3
strange line :      0x02 0x03 0x04
strange line :   Devices: 0
strange line :   In-driver Connection: 3
strange line :      0x02 0x03 0x04

- If I run "alsa-jack-sense-test -a" I get this output:

# python alsa-jack-sense-test.py -a
strange line :   Devices: 0
strange line :   In-driver Connection: 3
strange line :      0x02 0x03 0x04
strange line :   Devices: 0
strange line :   In-driver Connection: 3
strange line :      0x02 0x03 0x04
strange line :   Devices: 0
strange line :   In-driver Connection: 3
strange line :      0x02 0x03 0x04
Pin 0x05 (Unknown Digital Out): present = No
Pin 0x06 (Unknown Digital Out): present = No
Pin 0x07 (Unknown Digital Out): present = No

--
Patrick Shirkey
Boost Hardware Ltd

#1 lore raw
Quoted 118 lines

Hi,

I get some errors running hda_analyzer with this alc668 chipset.

Traceback (most recent call last):
File "/dev/shm/hda-analyzer/hda_analyzer.py", line 546, in <module>
sys.exit(main(sys.argv))
File "/dev/shm/hda-analyzer/hda_analyzer.py", line 523, in main

    if read_nodes(sys.argv[1:]) == 0:
  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 89, in read_nodes
    read_nodes2(c.card, i)
  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 60, in read_nodes2
    c = HDACodec(card, codec)
  File "/dev/shm/hda-analyzer/hda_codec.py", line 1041, in __init__
    self.parse_proc()
  File "/dev/shm/hda-analyzer/hda_codec.py", line 1140, in parse_proc
    self.proc_codec = HDACodecProc(self.card, self.device, file)
  File "/dev/shm/hda-analyzer/hda_proc.py", line 479, in __init__
    self.parse(proc_file)
  File "/dev/shm/hda-analyzer/hda_proc.py", line 677, in parse
    node.add_digital(line[11:])

File "/dev/shm/hda-analyzer/hda_proc.py", line 296, in add_digital
self.wrongfile('unknown dig1 bit %s' % repr(b))
File "/dev/shm/hda-analyzer/hda_proc.py", line 143, in wrongfile
raise ValueError, "wrong proc file format (%s)" % msg
ValueError: wrong proc file format (unknown dig1 bit 'KAE')

If I disable the check for add_digital I get this error:

ValueError: wrong proc file format ( Digital: Enabled KAE)

- Is it a problem to add a new DIG1_BIT to hda_proc.py:277

def add_digital(self, line):

    bits = {
      'Enabled': DIG1_BITS['ENABLE'],
      'Validity': DIG1_BITS['VALIDITY'],
      'ValidityCfg': DIG1_BITS['VALIDITYCFG'],
      'Preemphasis': DIG1_BITS['EMPHASIS'],
      'Copyright': DIG1_BITS['COPYRIGHT'], # old buggy format
      'Non-Copyright': DIG1_BITS['COPYRIGHT'],
      'Non-Audio': DIG1_BITS['NONAUDIO'],
      'Pro': DIG1_BITS['PROFESSIONAL'],
      'GenLevel': DIG1_BITS['LEVEL'],
      'KAE': DIG1_BITS['KAE'],
    }

hda_codec.py:224

DIG1_BITS = {
'ENABLE': 0,
'VALIDITY': 1,
'VALIDITYCFG': 2,
'EMPHASIS': 3,
'COPYRIGHT': 4,
'NONAUDIO': 5,
'PROFESSIONAL': 6,
'LEVEL': 7,
'KAE': 8
}

- If I do that I get this error:

Traceback (most recent call last):
File "hda_analyzer.py", line 546, in <module>
sys.exit(main(sys.argv))
File "hda_analyzer.py", line 523, in main

    if read_nodes(sys.argv[1:]) == 0:
  File "hda_analyzer.py", line 89, in read_nodes
    read_nodes2(c.card, i)

File "hda_analyzer.py", line 60, in read_nodes2
c = HDACodec(card, codec)
File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_codec.py", line
1043, in __init__
self.parse_proc()
File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_codec.py", line
1142, in parse_proc
self.proc_codec = HDACodecProc(self.card, self.device, file)
File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line
480, in __init__
self.parse(proc_file)
File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line
732, in parse
self.wrongfile(line)
File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line
143, in wrongfile
raise ValueError, "wrong proc file format (%s)" % msg
ValueError: wrong proc file format ( Devices: 0)

- If I replace the call in hda_proc.py:734 to self.wrongfile() with a print command

ex.
else:
print ('strange line : %s' % line)
# self.wrongfile(line)

I get this output and hda_analyzer interface starts:

# python hda_analyzer.py
strange line :   Devices: 0
strange line :   In-driver Connection: 3
strange line :      0x02 0x03 0x04
strange line :   Devices: 0
strange line :   In-driver Connection: 3
strange line :      0x02 0x03 0x04
strange line :   Devices: 0
strange line :   In-driver Connection: 3
strange line :      0x02 0x03 0x04

- If I run "alsa-jack-sense-test -a" I get this output:

Quoted 15 lines
# python alsa-jack-sense-test.py -a
strange line :   Devices: 0
strange line :   In-driver Connection: 3
strange line :      0x02 0x03 0x04
strange line :   Devices: 0
strange line :   In-driver Connection: 3
strange line :      0x02 0x03 0x04
strange line :   Devices: 0
strange line :   In-driver Connection: 3
strange line :      0x02 0x03 0x04
Pin 0x05 (Unknown Digital Out): present = No
Pin 0x06 (Unknown Digital Out): present = No
Pin 0x07 (Unknown Digital Out): present = No

You need to specify card 1 if you want test the alc668

https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda/hda_proc.c?id=6152597971db4055b7b03ccc60afcd62214d41f4

The error is because codec.py cannot parse the output of hda_proc.c

#2 lore raw
Quoted 7 lines · Raymond Yau

You need to specify card 1 if you want test the alc668

https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/commit/sound/pci/hda/hda_proc.c?id=6152597971db4055b7b03ccc60afcd62214d41f4

The error is because codec.py cannot parse the output of hda_proc.c

I have tried a few options but the only things that allow the UI to run are the steps above.

For example If I revert the changes and run this commandline I get the same errors.

sudo python hda_analyzer.py /proc/asound/card1/codec#0

Traceback (most recent call last):
File "hda_analyzer.py", line 546, in <module>
sys.exit(main(sys.argv))
File "hda_analyzer.py", line 523, in main

    if read_nodes(sys.argv[1:]) == 0:
  File "hda_analyzer.py", line 89, in read_nodes
    read_nodes2(c.card, i)

File "hda_analyzer.py", line 60, in read_nodes2
c = HDACodec(card, codec)
File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_codec.py", line
1041, in __init__
self.parse_proc()
File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_codec.py", line
1140, in parse_proc
self.proc_codec = HDACodecProc(self.card, self.device, file)
File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line
479, in __init__
self.parse(proc_file)
File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line
677, in parse

    node.add_digital(line[11:])

File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line
296, in add_digital
self.wrongfile('unknown dig1 bit %s' % repr(b))
File "/home/patrick/code/alsa-utilities/hda-analyzer/hda_proc.py", line
143, in wrongfile
raise ValueError, "wrong proc file format (%s)" % msg
ValueError: wrong proc file format (unknown dig1 bit 'KAE')

Apart from that the documentation on hda_analyzer is sparse and figuring out what to do with the interface will require several hours of my life.

Maybe I have missed something with the alsa-jack-sense-test script or one of the other python scripts but is it possible to script a tool that will try out every solution and figure out which pins should be enabled or are missing to achieve various results?

--
Patrick Shirkey
Boost Hardware Ltd

#3 lore raw
In reply to Patrick Shirkey

At Tue, 29 Jul 2014 23:09:02 +1000 (EST),

Quoted 51 lines · Patrick Shirkey

Hi,

I get some errors running hda_analyzer with this alc668 chipset.

Traceback (most recent call last):
File "/dev/shm/hda-analyzer/hda_analyzer.py", line 546, in <module>
sys.exit(main(sys.argv))
File "/dev/shm/hda-analyzer/hda_analyzer.py", line 523, in main

    if read_nodes(sys.argv[1:]) == 0:
  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 89, in read_nodes
    read_nodes2(c.card, i)
  File "/dev/shm/hda-analyzer/hda_analyzer.py", line 60, in read_nodes2
    c = HDACodec(card, codec)
  File "/dev/shm/hda-analyzer/hda_codec.py", line 1041, in __init__
    self.parse_proc()
  File "/dev/shm/hda-analyzer/hda_codec.py", line 1140, in parse_proc
    self.proc_codec = HDACodecProc(self.card, self.device, file)
  File "/dev/shm/hda-analyzer/hda_proc.py", line 479, in __init__
    self.parse(proc_file)
  File "/dev/shm/hda-analyzer/hda_proc.py", line 677, in parse
    node.add_digital(line[11:])

File "/dev/shm/hda-analyzer/hda_proc.py", line 296, in add_digital
self.wrongfile('unknown dig1 bit %s' % repr(b))
File "/dev/shm/hda-analyzer/hda_proc.py", line 143, in wrongfile
raise ValueError, "wrong proc file format (%s)" % msg
ValueError: wrong proc file format (unknown dig1 bit 'KAE')

If I disable the check for add_digital I get this error:

ValueError: wrong proc file format ( Digital: Enabled KAE)

- Is it a problem to add a new DIG1_BIT to hda_proc.py:277

def add_digital(self, line):

    bits = {
      'Enabled': DIG1_BITS['ENABLE'],
      'Validity': DIG1_BITS['VALIDITY'],
      'ValidityCfg': DIG1_BITS['VALIDITYCFG'],
      'Preemphasis': DIG1_BITS['EMPHASIS'],
      'Copyright': DIG1_BITS['COPYRIGHT'], # old buggy format
      'Non-Copyright': DIG1_BITS['COPYRIGHT'],
      'Non-Audio': DIG1_BITS['NONAUDIO'],
      'Pro': DIG1_BITS['PROFESSIONAL'],
      'GenLevel': DIG1_BITS['LEVEL'],
      'KAE': DIG1_BITS['KAE'],
    }

hda_codec.py:224

Quoted 11 lines

DIG1_BITS = {
'ENABLE': 0,
'VALIDITY': 1,
'VALIDITYCFG': 2,
'EMPHASIS': 3,
'COPYRIGHT': 4,
'NONAUDIO': 5,
'PROFESSIONAL': 6,
'LEVEL': 7,
'KAE': 8
}

KAE belongs to DIG3, so shouldn't be there.
I updated the git repo now.

While we are at it: it would make sense to move this from alsa to alsa-tools repo, IMO. Jaroslav, any objection?

The only question is the installation to the system, though.

Takashi