Skip to contentSkip to conversation

WM9712 Not Giving output

DISCUSSION Marek Vasut 3 participants 9 messages Aug 1, 2008 – Aug 7, 2008 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

Dne Friday 01 of August 2008 19:59:44 Nitin Mahajan napsal(a):

Quoted 178 lines

HI!

Quoted 168 lines · Marek Vasut

From: Marek Vasut <[email protected]>
Subject: Re: [alsa-devel] WM9712 Not Giving output
To: [email protected], [email protected]
Date: Friday, 1 August, 2008, 11:10 PM
Dne Friday 01 of August 2008 19:27:24 Nitin Mahajan

napsal(a):

Quoted 3 lines

HI!

--- On Fri, 1/8/08, Mark Brown

Quoted 1 line · <[email protected]> wrote:
Quoted 1 line

From: Mark Brown

<[email protected]>

Quoted 1 line
Quoted 1 line

Subject: Re: [alsa-devel] WM9712 Not Giving

output

Quoted 1 line
Quoted 1 line

To: "Nitin Mahajan"

<[email protected]>

Quoted 1 line
Quoted 1 line

"Manuel" <[email protected]>

Quoted 2 lines
Quoted 2 lines

Date: Friday, 1 August, 2008, 9:32 PM
On Fri, Aug 01, 2008 at 08:31:03AM -0700, Nitin

Mahajan

Quoted 8 lines
Quoted 8 lines
Quoted 1 line · wrote:

I am using a WM9712 codec chip with the AC97

controller on AMD AU1250.

Quoted 3 lines

Linux kernel version 2.6.24.2.

On AC97 controller's side, I can see the

DMA

Quoted 7 lines
Quoted 7 lines

happening on the host

Quoted 1 line

processor, interrupts also coming.

This suggests a mixer configuration problem.

Quoted 1 line

On the mixer front, I did unmute and set the

vol to

Quoted 3 lines
Quoted 3 lines

max for PCM and

Quoted 1 line

Headphone. I did not find any Master control

with this

Quoted 7 lines
Quoted 5 lines

chip. Isn't

Quoted 1 line

there any master control with this chip?

No.

If Master is not there, logically are the enough for

playback?

Quoted 4 lines

amixer set 'PCM' 255 unmute
amixer set 'Headphone' 255 unmute

Quoted 1 line
Quoted 1 line

Can some one please throw more light on the

Mixer

Quoted 5 lines
Quoted 5 lines

part, specific to

Quoted 3 lines

this chip.

What Mixer controls do I need to set with

what values

Quoted 5 lines
Quoted 5 lines

for playback and

Quoted 1 line

capture respectively with this chip?

Check the configuration of the Left HP Mixer and

Right HP

Quoted 2 lines
Quoted 2 lines

Mixer PCM
Playback switches. These should be enabled in

order to

Quoted 7 lines
Quoted 2 lines

play back via
the headphone output.

While writing the reply , the hardware is not with me. But I wil check these tommorow.

Quoted 1 line

If you still can't get audio output with that

please

Quoted 8 lines
Quoted 8 lines

send a copy of your
mixer configuration - run the command

alsactl store -f mixer-config

to write a file 'mixer-config' with this
information in it. Please
also check your kernel log from when the driver

is loaded

Quoted 4 lines
Quoted 4 lines

and when you
configure the mixer.

There is documentation of the audio paths

supported by the

Quoted 3 lines
Quoted 1 line

chip in the

I saw the figure in the datasheet, its quite

explainatory, as to which

Quoted 8 lines

registers are involved in which path.

Quoted 6 lines

datasheet, available from:

	http://www.wolfsonmicro.com/products/WM9712/

and you may find the audio route mappings in the

WM9712

Quoted 2 lines
Quoted 2 lines

driver useful to
refer to - the 'audio_map' table in the

driver

Quoted 2 lines
Quoted 2 lines

which shows how the parts
of the device are connected. The format is {

destination,

Quoted 8 lines
Quoted 2 lines

control,
source }.

Thanks and regards

-Nitin

Send instant messages to your online friends

http://uk.messenger.yahoo.com

Quoted 3 lines

_______________________________________________
Alsa-devel mailing list
[email protected]

Quoted 6 lines

http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Hi,
try searching the mailing list for "[PATCH] wm9712 mono mixer". That may help
you.

Quoted 6 lines

Interesting, do you mean that "Right HP Mixer" and "Left HP Mixer" should be "Right Mixer" and "Left Mixer" ?

thanks and regards

-Nitin

yea, and you should see alsa warning about it in kernel log as well.

Quoted 7 lines
Quoted 5 lines

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Send instant messages to your online friends http://uk.messenger.yahoo.com

This message wasnt CCed to alsa-devel, re-adding.

#2 lore raw
Quoted 221 lines · Marek Vasut

From: Marek Vasut <[email protected]>
Subject: Re: [alsa-devel] WM9712 Not Giving output
To: [email protected]
Cc: [email protected]
Date: Friday, 1 August, 2008, 11:53 PM
Dne Friday 01 of August 2008 19:59:44 Nitin Mahajan napsal(a):

Quoted 3 lines

HI!

--- On Fri, 1/8/08, Marek Vasut

Quoted 2 lines · <[email protected]> wrote:
Quoted 2 lines

From: Marek Vasut <[email protected]>
Subject: Re: [alsa-devel] WM9712 Not Giving

output

Quoted 1 line
Quoted 1 line

To: [email protected],

[email protected]

Quoted 2 lines
Quoted 2 lines

Date: Friday, 1 August, 2008, 11:10 PM
Dne Friday 01 of August 2008 19:27:24 Nitin

Mahajan

Quoted 7 lines
Quoted 7 lines

napsal(a):

Quoted 3 lines

HI!

--- On Fri, 1/8/08, Mark Brown

<[email protected]>

Quoted 5 lines · wrote:
Quoted 5 lines
Quoted 1 line
Quoted 1 line

From: Mark Brown

<[email protected]>

Quoted 1 line
Quoted 1 line

Subject: Re: [alsa-devel] WM9712 Not

Giving

Quoted 10 lines
Quoted 10 lines

output

Quoted 1 line
Quoted 1 line

To: "Nitin Mahajan"

<[email protected]>

Quoted 1 line
Quoted 1 line

"Manuel"

<[email protected]>

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

Date: Friday, 1 August, 2008, 9:32 PM On Fri, Aug 01, 2008 at 08:31:03AM

-0700, Nitin

Quoted 5 lines
Quoted 5 lines

Mahajan

Quoted 2 lines
Quoted 2 lines
Quoted 1 line · wrote:

I am using a WM9712 codec chip

with the AC97

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

controller on AMD AU1250.

Quoted 3 lines

Linux kernel version 2.6.24.2.

On AC97 controller's side, I

can see the

Quoted 8 lines
Quoted 8 lines

DMA

Quoted 5 lines
Quoted 5 lines

happening on the host

Quoted 1 line

processor, interrupts also coming.

This suggests a mixer configuration

problem.

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

On the mixer front, I did unmute

and set the

Quoted 6 lines
Quoted 6 lines

vol to

Quoted 3 lines
Quoted 3 lines

max for PCM and

Quoted 1 line

Headphone. I did not find any

Master control

Quoted 6 lines
Quoted 6 lines

with this

Quoted 3 lines
Quoted 3 lines

chip. Isn't

Quoted 1 line

there any master control with this

chip?

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 2 lines

No.

If Master is not there, logically are the

enough for

Quoted 7 lines
Quoted 7 lines

playback?

Quoted 4 lines

amixer set 'PCM' 255 unmute
amixer set 'Headphone' 255 unmute

Quoted 1 line
Quoted 1 line

Can some one please throw more

light on the

Quoted 8 lines
Quoted 8 lines

Mixer

Quoted 5 lines
Quoted 5 lines

part, specific to

Quoted 3 lines

this chip.

What Mixer controls do I need to

set with

Quoted 6 lines
Quoted 6 lines

what values

Quoted 3 lines
Quoted 3 lines

for playback and

Quoted 1 line

capture respectively with this

chip?

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

Check the configuration of the Left HP

Mixer and

Quoted 5 lines
Quoted 5 lines

Right HP

Quoted 2 lines
Quoted 2 lines

Mixer PCM
Playback switches. These should be

enabled in

Quoted 7 lines
Quoted 7 lines

order to

Quoted 4 lines
Quoted 2 lines

play back via
the headphone output.

While writing the reply , the hardware is

not with me.

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

But I wil check these tommorow.

Quoted 1 line

If you still can't get audio output

with that

Quoted 9 lines
Quoted 9 lines

please

Quoted 6 lines
Quoted 6 lines

send a copy of your
mixer configuration - run the command

alsactl store -f mixer-config

to write a file 'mixer-config'

with this

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

information in it. Please
also check your kernel log from when

the driver

Quoted 7 lines
Quoted 7 lines

is loaded

Quoted 4 lines
Quoted 4 lines

and when you
configure the mixer.

There is documentation of the audio

paths

Quoted 6 lines
Quoted 6 lines

supported by the

Quoted 3 lines
Quoted 1 line

chip in the

I saw the figure in the datasheet, its

quite

Quoted 8 lines
Quoted 8 lines

explainatory, as to which

Quoted 5 lines

registers are involved in which path.

Quoted 3 lines

datasheet, available from:

	http://www.wolfsonmicro.com/products/WM9712/
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

and you may find the audio route

mappings in the

Quoted 5 lines
Quoted 5 lines

WM9712

Quoted 2 lines
Quoted 2 lines

driver useful to
refer to - the 'audio_map'

table in the

Quoted 5 lines
Quoted 5 lines

driver

Quoted 2 lines
Quoted 2 lines

which shows how the parts
of the device are connected. The

format is {

Quoted 8 lines
Quoted 8 lines

destination,

Quoted 5 lines
Quoted 2 lines

control,
source }.

Thanks and regards

Quoted 7 lines
Quoted 7 lines
Quoted 3 lines

-Nitin

Send instant messages to your online friends

http://uk.messenger.yahoo.com

Quoted 1 line

_______________________________________________

Quoted 4 lines
Quoted 4 lines
Quoted 2 lines

Alsa-devel mailing list
[email protected]

http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Quoted 3 lines
Quoted 3 lines

Hi,
try searching the mailing list for "[PATCH]

wm9712

Quoted 4 lines
Quoted 2 lines

mono mixer". That may help
you.

Interesting, do you mean that "Right HP

Mixer" and "Left HP Mixer" should

Quoted 1 line

be "Right Mixer" and "Left Mixer"

Quoted 8 lines

?

Quoted 4 lines

thanks and regards

-Nitin

yea, and you should see alsa warning about it in kernel log as well.

Do you mean in dmesg?
Unfortunately I don't have hardware with me now to test. I shall do it tommorow morning.

Quoted 7 lines
Quoted 5 lines
Quoted 5 lines

_______________________________________________
Alsa-devel mailing list
[email protected]

http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Quoted 1 line
Quoted 8 lines
Quoted 1 line

Send instant messages to your online friends

http://uk.messenger.yahoo.com

This message wasnt CCed to alsa-devel, re-adding.
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Send instant messages to your online friends http://uk.messenger.yahoo.com

#3 lore raw
Quoted 5 lines · Nitin Mahajan
Quoted 2 lines

yea, and you should see alsa warning about it in kernel log as well.

Do you mean in dmesg?
Unfortunately I don't have hardware with me now to test. I shall do it tommorow morning.

Yes, but you won't see that log message with the older kernel you are using unless you have also backported ASoC from the current kernel (but if you've done that I'd have expected you'd have backported a current version with the patch in question already applied).

#4 lore raw
Quoted 16 lines · Mark Brown

From: Mark Brown <[email protected]>
Subject: Re: [alsa-devel] WM9712 Not Giving output
To: "Nitin Mahajan" <[email protected]>
Cc: "Marek Vasut" <[email protected]>, [email protected]
Date: Saturday, 2 August, 2008, 12:07 AM

Quoted 1 line · Nitin Mahajan
Quoted 1 line

yea, and you should see alsa warning about it in

kernel log

Quoted 4 lines
Quoted 1 line

as well.

Do you mean in dmesg?
Unfortunately I don't have hardware with me now to

test. I shall do it tommorow morning.

Quoted 7 lines

Yes, but you won't see that log message with the older kernel you are
using unless you have also backported ASoC from the current kernel (but
if you've done that I'd have expected you'd
have backported a current
version with the patch in question already applied).

I checked the mixer configuration.The registers 0x18h and 0x04h were mute at the time of initiating DMA for playback.

I did set both registers with 0x7fff. From mixer point of view, If I am using an headphone, are these registers enough? I am still not able to hear anything.

Quoted 4 lines

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Send instant messages to your online friends http://uk.messenger.yahoo.com

#5 lore raw
Quoted 3 lines · Nitin Mahajan

I checked the mixer configuration.The registers 0x18h and 0x04h were mute at the time of initiating DMA for playback.

I did set both registers with 0x7fff. From mixer point of view, If I am using an headphone, are these registers enough? I am still not able to hear anything.

Please provide alsactl output as requested - any configuration should be done via the ALSA mixer rather than register writes. In the case of register 0x18 setting 0x7fff will set a gain of -34.5dB on each channel which may be too low, depending on your input.

#6 lore raw

HI!

Quoted 16 lines · Mark Brown

From: Mark Brown <[email protected]>
Subject: Re: [alsa-devel] WM9712 Not Giving output
To: "Nitin Mahajan" <[email protected]>
Cc: [email protected]
Date: Monday, 4 August, 2008, 5:42 PM

Quoted 1 line · Nitin Mahajan

I checked the mixer configuration.The registers 0x18h

and 0x04h were mute at the time of initiating DMA for playback.

Quoted 1 line

I did set both registers with 0x7fff. From mixer point

of view, If I am using an headphone, are these registers enough? I am still not able to hear anything.

Quoted 7 lines

Please provide alsactl output as requested - any configuration should be
done via the ALSA mixer rather than register writes. In the case of
register 0x18 setting 0x7fff will set a gain of -34.5dB on each channel
which may be too low, depending on your input.

Here is the mixer-config file got through 'alsactl'. Could you please guide me which controls to set with what values using amixer, for playback through Headphone and Recording?

regards

-Nitin

Quoted 4 lines

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Send instant messages to your online friends http://uk.messenger.yahoo.com

state.AC97 {
	control.1 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		iface MIXER
		name 'Speaker Playback Volume'
		value.0 31
		value.1 31
	}
	control.2 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Speaker Playback Switch'
		value false
	}
	control.3 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		iface MIXER
		name 'Headphone Playback Volume'
		value.0 31
		value.1 31
	}
	control.4 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Headphone Playback Switch'
		value false
	}
	control.5 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		iface MIXER
		name 'PCM Playback Volume'
		value.0 23
		value.1 23
	}
	control.6 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Speaker Playback ZC Switch'
		value false
	}
	control.7 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Speaker Playback Invert Switch'
		value false
	}
	control.8 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Headphone Playback ZC Switch'
		value false
	}
	control.9 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Mono Playback ZC Switch'
		value false
	}
	control.10 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 31'
		iface MIXER
		name 'Mono Playback Volume'
		value 0
	}
	control.11 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 15'
		iface MIXER
		name 'ALC Target Volume'
		value 11
	}
	control.12 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 15'
		iface MIXER
		name 'ALC Hold Time'
		value 0
	}
	control.13 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 15'
		iface MIXER
		name 'ALC Decay Time'
		value 3
	}
	control.14 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 15'
		iface MIXER
		name 'ALC Attack Time'
		value 2
	}
	control.15 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 None
		comment.item.1 Left
		comment.item.2 Right
		comment.item.3 Stereo
		iface MIXER
		name 'ALC Function'
		value None
	}
	control.16 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 7'
		iface MIXER
		name 'ALC Max Volume'
		value 7
	}
	control.17 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 3'
		iface MIXER
		name 'ALC ZC Timeout'
		value 0
	}
	control.18 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'ALC ZC Switch'
		value false
	}
	control.19 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'ALC NG Switch'
		value false
	}
	control.20 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 'Constant Gain'
		comment.item.1 Mute
		iface MIXER
		name 'ALC NG Type'
		value 'Constant Gain'
	}
	control.21 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 31'
		iface MIXER
		name 'ALC NG Threshold'
		value 31
	}
	control.22 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 7'
		iface MIXER
		name 'Mic Headphone  Volume'
		value 4
	}
	control.23 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 7'
		iface MIXER
		name 'ALC Headphone Volume'
		value 5
	}
	control.24 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Out3 Switch'
		value false
	}
	control.25 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Out3 ZC Switch'
		value true
	}
	control.26 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 31'
		iface MIXER
		name 'Out3 Volume'
		value 31
	}
	control.27 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 7'
		iface MIXER
		name 'PCBeep Bypass Headphone Volume'
		value 5
	}
	control.28 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 7'
		iface MIXER
		name 'PCBeep Bypass Speaker Volume'
		value 5
	}
	control.29 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 7'
		iface MIXER
		name 'PCBeep Bypass Phone Volume'
		value 5
	}
	control.30 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 7'
		iface MIXER
		name 'Aux Playback Headphone Volume'
		value 5
	}
	control.31 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 7'
		iface MIXER
		name 'Aux Playback Speaker Volume'
		value 5
	}
	control.32 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 7'
		iface MIXER
		name 'Aux Playback Phone Volume'
		value 5
	}
	control.33 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 15'
		iface MIXER
		name 'Phone Volume'
		value 8
	}
	control.34 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 31'
		iface MIXER
		name 'Line Capture Volume'
		value.0 23
		value.1 23
	}
	control.35 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Capture 20dB Boost Switch'
		value false
	}
	control.36 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Capture to Phone 20dB Boost Switch'
		value true
	}
	control.37 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name '3D Upper Cut-off Switch'
		value true
	}
	control.38 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name '3D Lower Cut-off Switch'
		value true
	}
	control.39 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 15'
		iface MIXER
		name '3D Playback Volume'
		value 0
	}
	control.40 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 'Linear Control'
		comment.item.1 'Adaptive Boost'
		iface MIXER
		name 'Bass Control'
		value 'Linear Control'
	}
	control.41 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Bass Cut-off Switch'
		value true
	}
	control.42 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Tone Cut-off Switch'
		value true
	}
	control.43 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Playback Attenuate (-6dB) Switch'
		value false
	}
	control.44 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 15'
		iface MIXER
		name 'Bass Volume'
		value 15
	}
	control.45 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 15'
		iface MIXER
		name 'Treble Volume'
		value 15
	}
	control.46 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Capture ADC Switch'
		value false
	}
	control.47 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 2
		comment.item.0 '+1.5dB Steps'
		comment.item.1 '+0.75dB Steps'
		iface MIXER
		name 'Capture Volume Steps'
		value.0 '+1.5dB Steps'
		value.1 '+1.5dB Steps'
	}
	control.48 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 2
		comment.range '0 - 63'
		iface MIXER
		name 'Capture Volume'
		value.0 63
		value.1 63
	}
	control.49 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Capture ZC Switch'
		value false
	}
	control.50 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 31'
		iface MIXER
		name 'Mic 1 Volume'
		value 23
	}
	control.51 {
		comment.access 'read write'
		comment.type INTEGER
		comment.count 1
		comment.range '0 - 31'
		iface MIXER
		name 'Mic 2 Volume'
		value 23
	}
	control.52 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Mic 20dB Boost Switch'
		value false
	}
	control.53 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Speaker Mixer PCBeep Bypass Swi'
		value false
	}
	control.54 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Speaker Mixer Aux Playback Swit'
		value false
	}
	control.55 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Speaker Mixer Phone Bypass Swit'
		value false
	}
	control.56 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Speaker Mixer Line Bypass Switc'
		value false
	}
	control.57 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Speaker Mixer PCM Playback Swit'
		value false
	}
	control.58 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Phone Mixer PCBeep Bypass Switc'
		value false
	}
	control.59 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Phone Mixer Aux Playback Switch'
		value false
	}
	control.60 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Phone Mixer Line Bypass Switch'
		value false
	}
	control.61 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Phone Mixer PCM Playback Switch'
		value false
	}
	control.62 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Phone Mixer Mic 1 Sidetone Swit'
		value false
	}
	control.63 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Phone Mixer Mic 2 Sidetone Swit'
		value false
	}
	control.64 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Right Mixer PCM Playback Switch'
		value false
	}
	control.65 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Left Mixer PCM Playback Switch'
		value false
	}
	control.66 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 Mic
		comment.item.1 Line
		iface MIXER
		name 'Differential Source'
		value Mic
	}
	control.67 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 'Mic 1'
		comment.item.1 Differential
		comment.item.2 'Mic 2'
		comment.item.3 Stereo
		iface MIXER
		name 'Mic Select Source'
		value 'Mic 1'
	}
	control.68 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 Mic
		comment.item.1 NC
		comment.item.2 NC
		comment.item.3 'Speaker Mixer'
		comment.item.4 Line
		comment.item.5 'Headphone Mixer'
		comment.item.6 'Phone Mixer'
		comment.item.7 Phone
		iface MIXER
		name 'Right Capture Select'
		value Mic
	}
	control.69 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 Mic
		comment.item.1 NC
		comment.item.2 NC
		comment.item.3 'Speaker Mixer'
		comment.item.4 Line
		comment.item.5 'Headphone Mixer'
		comment.item.6 'Phone Mixer'
		comment.item.7 Phone
		iface MIXER
		name 'Left Capture Select'
		value Mic
	}
	control.70 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 Stereo
		comment.item.1 Left
		comment.item.2 Right
		comment.item.3 Mute
		iface MIXER
		name 'Capture Phone Mux'
		value Mute
	}
	control.71 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 'Speaker Mix'
		comment.item.1 'Headphone Mix'
		iface MIXER
		name 'Speaker Mux'
		value 'Speaker Mix'
	}
	control.72 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 Left
		comment.item.1 VREF
		comment.item.2 'Left + Right'
		comment.item.3 Mono
		iface MIXER
		name 'Out3 Mux'
		value Left
	}
	control.73 {
		comment.access 'read write'
		comment.type ENUMERATED
		comment.count 1
		comment.item.0 Stereo
		comment.item.1 Left
		comment.item.2 Right
		comment.item.3 None
		iface MIXER
		name 'ALC Sidetone Mux'
		value None
	}
}

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#7 lore raw
Quoted 1 line · Nitin Mahajan

Here is the mixer-config file got through 'alsactl'. Could you please guide me which controls to set with what values using amixer, for playback through Headphone and Recording?

For playback try these:

Quoted 8 lines
	control.4 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Headphone Playback Switch'
		value false
	}

This should be enabled.

Quoted 8 lines
	control.8 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Headphone Playback ZC Switch'
		value false
	}

It's better to enable this but not essential - it avoids audio artifacts while doing volume updates during playback.

Quoted 8 lines
	control.64 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Right Mixer PCM Playback Switch'
		value false
	}
Quoted 8 lines
	control.65 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Left Mixer PCM Playback Switch'
		value false
	}

These should be enabled.

If this still gives you trouble then please build with DAPM_DEBUG enabled in soc-dapm.c (or #define DEBUG at very the top of the file prior to the includes if using a very current version). This will cause ASoC to produce debug output when it starts playback which should show anything that needs to be enabled but isn't.

Please also make sure that you are using a driver with the patch that Marek identified earlier in the thread.

#8 lore raw

HI!

Quoted 68 lines · Mark Brown

From: Mark Brown <[email protected]>
Subject: Re: [alsa-devel] WM9712 Not Giving output
To: "Nitin Mahajan" <[email protected]>
Cc: [email protected]
Date: Wednesday, 6 August, 2008, 2:56 PM

Quoted 1 line · Nitin Mahajan

Here is the mixer-config file got through

'alsactl'. Could you please guide me which controls to set with what values using amixer, for playback through Headphone and Recording?

For playback try these:

Quoted 8 lines
	control.4 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Headphone Playback Switch'
		value false
	}

This should be enabled.

Quoted 8 lines
	control.8 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Headphone Playback ZC Switch'
		value false
	}

It's better to enable this but not essential - it avoids audio artifacts
while doing volume updates during playback.

Quoted 8 lines
	control.64 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Right Mixer PCM Playback Switch'
		value false
	}
Quoted 8 lines
	control.65 {
		comment.access 'read write'
		comment.type BOOLEAN
		comment.count 1
		iface MIXER
		name 'Left Mixer PCM Playback Switch'
		value false
	}

These should be enabled.

If this still gives you trouble then please build with DAPM_DEBUG
enabled in soc-dapm.c (or #define DEBUG at very the top of the file
prior to the includes if using a very current version). This will cause
ASoC to produce debug output when it starts playback which should show
anything that needs to be enabled but isn't.

Quoted 3 lines

Please also make sure that you are using a driver with the patch that
Marek identified earlier in the thread.

Thanks I will try setting these for playback. Just for the Hardware verification I tried setting registers myself for the Mixer. I understand that finally thats not the right way. AS u suggested in earlier the gain was problem. I was making it as negative gain, which is as good as mute. I kept it default and playback worked for me.

I am not able to make the Mic recording work now. Apart from the mixer controls, I identified these registers to be programmed with following values, which again to seperate out the problem area, H/w or S/w.I am using single ended mono microphone on Left i.e Mic 1.

Ox24h 0x0000
0x26h 0x0000
0x0Eh 0x6000
0x5Ch 0x0000
0x0Ah 0x7000
0x1Ch 0x0f00
0x20h 0x0000

Also , If I take the Linux-2.6.26 kernel from mips, can you tell me how to get the patch from wolfson ASOC git so that I have all the latest ASOC and WM related code? I am not familiar with git :(.

Thanks in advance

regards

-Nitin

Get your new Email address!
Grab the Email name you&#39;ve always wanted before someone else does!
http://mail.promotions.yahoo.com/newdomains/aa/

#9 lore raw
Quoted 1 line · Nitin Mahajan

I am not able to make the Mic recording work now. Apart from the mixer controls, I identified these registers to be programmed with following values, which again to seperate out the problem area, H/w or S/w.I am using single ended mono microphone on Left i.e Mic 1.

Please work in terms of the ALSA controls - it is much easier to provide support when working through the exposed interfaces and direct register writes may be overwritten by the driver, causing additional confusion.

Quoted 2 lines

Also , If I take the Linux-2.6.26 kernel from mips, can you tell me how to get the patch from wolfson ASOC git so that I have all the latest ASOC and WM related code? I am not familiar with git :(.

To get the latest development code:

	git clone git://opensource.wolfsonmicro.com/linux-2.6-asoc
	cd linux-2.6-asoc

You can generate a diff from a tag to the latest development branch like this:

	git diff v2.6.26..origin/dev

(Linux releases are tagged in that format - 'git tag' will list the known tags) specifying directories lets you filter what's included so:

git diff v2.6.26..origin/dev sound include/sound

will only give you ALSA related changes.