pwm: omap-dmtimer: Allow for dynamic pwm period updates
v2 cover pwm: omap-dmtimer: Allow for dynamic pwm period updates
This series fixes minor issues in config callback and allows for on the fly updates for pwm period and duty cycle. This is mainly intended to allow pwm omap dmtimer to be used for generating a 1PPS signal that can be syncronized to PTP clock in CPTS module available in AM335x and AM57xx SoCs.
Series depends on the following series:
- https://patchwork.kernel.org/patch/11379875/
- https://patchwork.kernel.org/project/linux-omap/list/?series=248929
Full dependencies can be seen here:
https://github.com/lokeshvutla/linux/tree/devel/pwm-1pps-generation-v2
Changes since v1:
- Updated commit description in PATCH 1
- Added a brief about PWM generation using OMAP DM timer.
- Updated the pwm stop callback to allow for completing the current pwm cycle.
- Added the limitaitons of hardware.
- Used hw status instead of relying on pwm framework for state update.
Lokesh Vutla (6):
pwm: omap-dmtimer: Drop unused header file
pwm: omap-dmtimer: Update description for pwm omap dm timer
pwm: omap-dmtimer: Fix pwm enabling sequence
pwm: omap-dmtimer: Fix pwm disabling sequence
pwm: omap-dmtimer: Do not disable pwm before changing
period/duty_cycle
pwm: omap-dmtimer: Implement .apply callback
drivers/pwm/pwm-omap-dmtimer.c | 248 +++++++++++++----- include/clocksource/timer-ti-dm.h | 3 +- .../linux/platform_data/pwm_omap_dmtimer.h | 90 ------- 3 files changed, 178 insertions(+), 163 deletions(-) delete mode 100644 include/linux/platform_data/pwm_omap_dmtimer.h
Signature · 1 line
2.23.0
PATCH v2 1/6 pwm: omap-dmtimer: Drop unused header file
pwm_omap_dmtimer.h is used only:
- to typedef struct omap_dm_timer to pwm_omap_dmtimer
- for macro PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE Rest of the file is pretty mush unsed. So reuse omap_dm_timer and OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE in pwm-omap-dmtimer.c and delete the header file.
--- drivers/pwm/pwm-omap-dmtimer.c | 20 ++--- include/clocksource/timer-ti-dm.h | 3 +- .../linux/platform_data/pwm_omap_dmtimer.h | 90 ------------------- 3 files changed, 10 insertions(+), 103 deletions(-) delete mode 100644 include/linux/platform_data/pwm_omap_dmtimer.h
drivers/pwm/pwm-omap-dmtimer.c +9 -11
@@ -20,8 +20,8 @@#include <linux/mutex.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <clocksource/timer-ti-dm.h> #include <linux/platform_data/dmtimer-omap.h> -#include <linux/platform_data/pwm_omap_dmtimer.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/pwm.h>
@@ -34,7 +34,7 @@struct pwm_omap_dmtimer_chip {struct pwm_chip chip;struct mutex mutex; -pwm_omap_dmtimer *dm_timer; +struct omap_dm_timer *dm_timer;const struct omap_dm_timer_ops *pdata;struct platform_device *dm_timer_pdev; };
@@ -190,10 +190,9 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip, load_value, load_value, match_value, match_value); omap->pdata->set_pwm (omap->dm_timer, -pwm_get_polarity (pwm) ==PWM_POLARITY_INVERSED , - true, -PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE , - true); +pwm_get_polarity (pwm) ==PWM_POLARITY_INVERSED , + true,OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE , + true);/* If config was called while timer was running it must be reenabled. */ if (timer_active)
@@ -221,10 +220,9 @@ static int pwm_omap_dmtimer_set_polarity(struct pwm_chip *chip,*/ mutex_lock (&omap->mutex); omap->pdata->set_pwm (omap->dm_timer, - polarity ==PWM_POLARITY_INVERSED , - true, -PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE , - true); + polarity ==PWM_POLARITY_INVERSED , + true,OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE , + true);mutex_unlock (&omap->mutex);return 0 ;
@@ -246,7 +244,7 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)struct pwm_omap_dmtimer_chip *omap;struct dmtimer_platform_data *timer_pdata;const struct omap_dm_timer_ops *pdata; -pwm_omap_dmtimer *dm_timer; +struct omap_dm_timer *dm_timer;u32 v;int ret =0 ;
include/clocksource/timer-ti-dm.h +1 -2
@@ -247,8 +247,7 @@ int omap_dm_timers_active(void);/* * The below are inlined to optimize code size for system timers. Other code -* should not need these at all, see -* include/linux/platform_data/pwm_omap_dmtimer.h +* should not need these at all. */ #if defined(CONFIG_ARCH_OMAP1 ) || defined(CONFIG_ARCH_OMAP2PLUS ) static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg,
include/linux/platform_data/pwm_omap_dmtimer.h deleted +0 -90
90 lines not on this page · raw message
Signature · 1 line
2.23.0
Re: [PATCH v2 1/6] pwm: omap-dmtimer: Drop unused header file
Quoted 6 lines · Lokesh Vutla
pwm_omap_dmtimer.his used only:
- to typedef structomap_dm_timertopwm_omap_dmtimer
- for macroPWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARERest of the file is pretty mush unsed. So reuseomap_dm_timerandOMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPAREinpwm-omap-dmtimer.cand delete the header file.
PATCH v2 2/6 pwm: omap-dmtimer: Update description for pwm omap dm timer
In reply to Lokesh VutlaUpdate the description with a brief about how pwm is generated using OMAP DM timer. Also add link to the Reference Manual.
--- drivers/pwm/pwm-omap-dmtimer.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/pwm/pwm-omap-dmtimer.c +5 -1
@@ -10,7 +10,11 @@* * Description: * This file is the core OMAP support for the generic, Linux -* PWM driver / controller, using the OMAP's dual-mode timers. +* PWM driver / controller, using the OMAP's dual-mode timers +* with a timer counter that goes up. When it overflows it gets +* reloaded with the load value and the pwm output goes up. +* When counter matches with match register, the output goes down. +* Reference Manual: http://www.ti.com/lit/ug/spruh73q/spruh73q.pdf */ #include <linux/clk.h>
Signature · 1 line
2.23.0
Re: [PATCH v2 2/6] pwm: omap-dmtimer: Update description for pwm omap dm timer
Quoted 2 lines · Lokesh Vutla
Update the description with a brief about how pwm is generated using OMAP DM timer. Also add link to the Reference Manual.
PATCH v2 3/6 pwm: omap-dmtimer: Fix pwm enabling sequence
In reply to Lokesh VutlaTo configure DM timer in pwm mode the following needs to be set in OMAP_TIMER_CTRL_REG using set_pwm callback:
- Set toggle mode on PORTIMERPWM output pin
- Set trigger on overflow and match on PORTIMERPWM output pin.
- Set auto reload
This is a one time configuration and needs to be set before the start of the dm timer. But the current driver tries to set the same configuration for every period/duty cycle update, which is not needed. So move the pwm setup before enabling timer and do not update it in pwm_omap_dmtimer_config.
--- drivers/pwm/pwm-omap-dmtimer.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/pwm/pwm-omap-dmtimer.c +5 -5
@@ -77,6 +77,11 @@ static int pwm_omap_dmtimer_enable(struct pwm_chip *chip,struct pwm_omap_dmtimer_chip *omap =to_pwm_omap_dmtimer_chip (chip);mutex_lock (&omap->mutex); + omap->pdata->set_pwm (omap->dm_timer, +pwm_get_polarity (pwm) ==PWM_POLARITY_INVERSED , + true,OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE , + true); +pwm_omap_dmtimer_start (omap);mutex_unlock (&omap->mutex);
@@ -193,11 +198,6 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,dev_dbg (chip->dev,"load value: %#08x (%d), match value: %#08x (%d)\n" , load_value, load_value, match_value, match_value); - omap->pdata->set_pwm (omap->dm_timer, -pwm_get_polarity (pwm) ==PWM_POLARITY_INVERSED , - true,OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE , - true); -/* If config was called while timer was running it must be reenabled. */ if (timer_active)pwm_omap_dmtimer_start (omap);
Signature · 1 line
2.23.0
Re: [PATCH v2 3/6] pwm: omap-dmtimer: Fix pwm enabling sequence
Quoted 10 lines · Lokesh Vutla
To configure DM timer in pwm mode the following needs to be set in
OMAP_TIMER_CTRL_REGusingset_pwmcallback:
- Set toggle mode on PORTIMERPWM output pin
- Set trigger on overflow and match on PORTIMERPWM output pin.
- Set auto reloadThis is a one time configuration and needs to be set before the start of the dm timer. But the current driver tries to set the same configuration for every period/duty cycle update, which is not needed. So move the pwm setup before enabling timer and do not update it in
pwm_omap_dmtimer_config.
Still works for me:
PATCH v2 4/6 pwm: omap-dmtimer: Fix pwm disabling sequence
In reply to Lokesh Vutlapwm_omap_dmtimer_disable() calls .stop callback which abruptly stops the timer counter. This doesn't complete the current pwm cycle and immediately disables the pwm. Instead disable the auto reload functionality which allows to complete the current pwm cycle and then disables the timer.
--- drivers/pwm/pwm-omap-dmtimer.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/pwm/pwm-omap-dmtimer.c +9 -1
@@ -93,8 +93,16 @@ static void pwm_omap_dmtimer_disable(struct pwm_chip *chip, {struct pwm_omap_dmtimer_chip *omap =to_pwm_omap_dmtimer_chip (chip); +/* +* Disable auto reload so that the current cycle gets completed and +* then the counter stops. +*/ mutex_lock (&omap->mutex); - omap->pdata->stop (omap->dm_timer); + omap->pdata->set_pwm (omap->dm_timer, +pwm_get_polarity (pwm) ==PWM_POLARITY_INVERSED , + true,OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE , + false); +mutex_unlock (&omap->mutex); }
Signature · 1 line
2.23.0
Re: [PATCH v2 4/6] pwm: omap-dmtimer: Fix pwm disabling sequence
Quoted 22 lines · Lokesh Vutla
pwm_omap_dmtimer_disable()calls .stop callback which abruptly stops the timer counter. This doesn't complete the current pwm cycle and immediately disables the pwm. Instead disable the auto reload functionality which allows to complete the current pwm cycle and then disables the timer.Signed-off-by Lokesh Vutla <[email protected]>--- drivers/pwm/pwm-omap-dmtimer.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)drivers/pwm/pwm-omap-dmtimer.c +3
-0@@ -93,8 +93,16 @@ static void pwm_omap_dmtimer_disable(struct pwm_chip *chip, {struct pwm_omap_dmtimer_chip *omap =to_pwm_omap_dmtimer_chip (chip); +/* +* Disable auto reload so that the current cycle gets completed and +* then the counter stops.
drivers/pwm/pwm-omap-dmtimer.c static void pwm_omap_dmtimer_disable(struct pwm_chip *chip, · line 107
Quoted 10 lines
drivers/pwm/pwm-omap-dmtimer.c +6
-1+*/ mutex_lock (&omap->mutex); - omap->pdata->stop (omap->dm_timer); + omap->pdata->set_pwm (omap->dm_timer, +pwm_get_polarity (pwm) ==PWM_POLARITY_INVERSED , + true,OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE , + false); +mutex_unlock (&omap->mutex); }
I'm seeing an issue with this patch where after use something is left on and power consumption stays higher by about 30 mW after use.
I can reproduce this easily on droid4 with Sebastian's rumble-test app[0]. After use, I sometimes also hear the vibrator keep chirping quietly, so there seems to be some pwm still happening after disable :)
Reloading modules for pwm-vibra and pwm-omap-dmtimer make the power consumption go back down again.
If you have a scope set up, maybe check the lines are quiet after disable after this patch?
Regards,
Tony
[0] https://git.collabora.com/cgit/user/sre/rumble-test.git/plain/rumble-test.c
Re: [PATCH v2 4/6] pwm: omap-dmtimer: Fix pwm disabling sequence
Hi Tony,
Quoted 29 lines · Tony Lindgren
Quoted 28 lines · Lokesh Vutla
pwm_omap_dmtimer_disable()calls .stop callback which abruptly stops the timer counter. This doesn't complete the current pwm cycle and immediately disables the pwm. Instead disable the auto reload functionality which allows to complete the current pwm cycle and then disables the timer.Signed-off-by Lokesh Vutla <[email protected]>--- drivers/pwm/pwm-omap-dmtimer.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)drivers/pwm/pwm-omap-dmtimer.c +7
-1@@ -93,8 +93,16 @@ static void pwm_omap_dmtimer_disable(struct pwm_chip *chip, {struct pwm_omap_dmtimer_chip *omap =to_pwm_omap_dmtimer_chip (chip); +/* +* Disable auto reload so that the current cycle gets completed and +* then the counter stops. +*/ mutex_lock (&omap->mutex); - omap->pdata->stop (omap->dm_timer); + omap->pdata->set_pwm(omap->dm_timer, + pwm_get_polarity(pwm) == PWM_POLARITY_INVERSED, + true, OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE,
Quoted 8 lines
drivers/pwm/pwm-omap-dmtimer.c static void pwm_omap_dmtimer_disable(struct pwm_chip *chip, · line 107
Quoted 4 lines
drivers/pwm/pwm-omap-dmtimer.c +2
-0+ false); +mutex_unlock (&omap->mutex); }I'm seeing an issue with this patch where after use something is left on and power consumption stays higher by about 30 mW after use.
Interesting...What is the PWM period and duty cycle in the test case? Can you dump the following registers before and after disabling:
- TLDR
- TMAR
- TCLR
Quoted 4 lines
I can reproduce this easily on droid4 with Sebastian's rumble-test app[0]. After use, I sometimes also hear the vibrator keep chirping quietly, so there seems to be some pwm still happening after disable :)
hmm..The line clearly goes down on the scope after the current pwm duty cycle is done and never comes back.
Quoted 7 lines
Reloading modules for pwm-vibra and pwm-omap-dmtimer make the power consumption go back down again.
If you have a scope set up, maybe check the lines are quiet after disable after this patch?
Quoted 6 lines
Regards,
Tony
[0] https://git.collabora.com/cgit/user/sre/rumble-test.git/plain/rumble-test.c
This is redirecting to collabora.com. Is this code available in github or some public repo?
Thanks and regards,
Lokesh
Re: [PATCH v2 4/6] pwm: omap-dmtimer: Fix pwm disabling sequence
Hi,
Quoted 7 lines · Lokesh Vutla
This is redirecting to collabora.com. Is this code available in github or some public repo?
Thanks and regards,
Lokesh
Sorry, we migrated to gitlab under different domain. I pushed it here now: https://github.com/sre/rumble-test
-- Sebastian
Re: [PATCH v2 4/6] pwm: omap-dmtimer: Fix pwm disabling sequence
In reply to Lokesh VutlaQuoted 41 lines · Lokesh Vutla
Hi Tony,
Quoted 29 lines · Tony Lindgren
Quoted 28 lines · Lokesh Vutla
pwm_omap_dmtimer_disable()calls .stop callback which abruptly stops the timer counter. This doesn't complete the current pwm cycle and immediately disables the pwm. Instead disable the auto reload functionality which allows to complete the current pwm cycle and then disables the timer.Signed-off-by Lokesh Vutla <[email protected]>--- drivers/pwm/pwm-omap-dmtimer.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)drivers/pwm/pwm-omap-dmtimer.c +7
-1@@ -93,8 +93,16 @@ static void pwm_omap_dmtimer_disable(struct pwm_chip *chip, {struct pwm_omap_dmtimer_chip *omap =to_pwm_omap_dmtimer_chip (chip); +/* +* Disable auto reload so that the current cycle gets completed and +* then the counter stops. +*/ mutex_lock (&omap->mutex); - omap->pdata->stop (omap->dm_timer); + omap->pdata->set_pwm(omap->dm_timer, + pwm_get_polarity(pwm) == PWM_POLARITY_INVERSED, + true, OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE,Quoted 8 lines
drivers/pwm/pwm-omap-dmtimer.c static void pwm_omap_dmtimer_disable(struct pwm_chip *chip, · line 107
Quoted 4 lines
drivers/pwm/pwm-omap-dmtimer.c +2
-0+ false); +mutex_unlock (&omap->mutex); }I'm seeing an issue with this patch where after use something is left on and power consumption stays higher by about 30 mW after use.
Quoted 5 lines
Interesting...What is the PWM period and duty cycle in the test case? Can you dump the following registers before and after disabling:
- TLDR
- TMAR
- TCLR
Here's the state dumped before and after in omap_dm_timer_set_pwm():
omap_timer 4803e000.timer: XXX set_pwm before: tldr: fffffeb8 tmar: fffffffe tclr: 00000040 omap_timer 4803e000.timer: XXX set_pwm after: tldr: fffffeb8 tmar: fffffffe tclr: 00001842 omap_timer 4013e000.timer: XXX set_pwm before: tldr: fffffeb8 tmar: fffffffe tclr: 00000040 omap_timer 4013e000.timer: XXX set_pwm after: tldr: fffffeb8 tmar: fffffffe tclr: 00001842 omap_timer 4013e000.timer: XXX set_pwm before: tldr: fffffeb8 tmar: fffffffe tclr: 00001843 omap_timer 4013e000.timer: XXX set_pwm after: tldr: fffffeb8 tmar: fffffffe tclr: 00001841 omap_timer 4803e000.timer: XXX set_pwm before: tldr: fffffeb8 tmar: fffffffe tclr: 00001843 omap_timer 4803e000.timer: XXX set_pwm after: tldr: fffffeb8 tmar: fffffffe tclr: 00001841
So looks like the start bit is still enabled after use?
I think the duty cycle depends on the strength set for rumble-test.c.
Quoted 6 lines
Quoted 3 lines
I can reproduce this easily on droid4 with Sebastian's rumble-test app[0]. After use, I sometimes also hear the vibrator keep chirping quietly, so there seems to be some pwm still happening after disable :)
hmm..The line clearly goes down on the scope after the current pwm duty cycle is done and never comes back.
OK
Regards,
Tony
Re: [PATCH v2 4/6] pwm: omap-dmtimer: Fix pwm disabling sequence
Hi Tony,
[...snip...]
Quoted 27 lines
Quoted 19 lines
Quoted 10 lines
Quoted 10 lines
drivers/pwm/pwm-omap-dmtimer.c +7
-1+/* +* Disable auto reload so that the current cycle gets completed and +* then the counter stops. +*/ mutex_lock (&omap->mutex); - omap->pdata->stop (omap->dm_timer); + omap->pdata->set_pwm(omap->dm_timer, + pwm_get_polarity(pwm) == PWM_POLARITY_INVERSED, + true, OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE,Quoted 8 lines
drivers/pwm/pwm-omap-dmtimer.c static void pwm_omap_dmtimer_disable(struct pwm_chip *chip, · line 107
Quoted 4 lines
drivers/pwm/pwm-omap-dmtimer.c +2
-0+ false); +mutex_unlock (&omap->mutex); }I'm seeing an issue with this patch where after use something is left on and power consumption stays higher by about 30 mW after use.
Quoted 5 lines
Interesting...What is the PWM period and duty cycle in the test case? Can you dump the following registers before and after disabling:
- TLDR
- TMAR
- TCLRHere's the state dumped before and after in
omap_dm_timer_set_pwm():
Quoted 9 lines
omap_timer4803e000.timer: XXXset_pwmbefore: tldr:fffffeb8tmar: fffffffe tclr: 00000040omap_timer4803e000.timer: XXXset_pwmafter: tldr:fffffeb8tmar: fffffffe tclr: 00001842omap_timer4013e000.timer: XXXset_pwmbefore: tldr:fffffeb8tmar: fffffffe tclr: 00000040omap_timer4013e000.timer: XXXset_pwmafter: tldr:fffffeb8tmar: fffffffe tclr: 00001842omap_timer4013e000.timer: XXXset_pwmbefore: tldr:fffffeb8tmar: fffffffe tclr: 00001843omap_timer4013e000.timer: XXXset_pwmafter: tldr:fffffeb8tmar: fffffffe tclr: 00001841omap_timer4803e000.timer: XXXset_pwmbefore: tldr:fffffeb8tmar: fffffffe tclr: 00001843omap_timer4803e000.timer: XXXset_pwmafter: tldr:fffffeb8tmar: fffffffe tclr: 00001841
Looking at the registers:
period = 327 *(1000/clk_freq in MHz) nsduty_cycle = perioid.
I did simulate this behavior on BeagleBoneBlack on timer7. PWM is going down after disabling.
Quoted 1 line
So looks like the start bit is still enabled after use?
Right, that is expected. The start bit gets disabled automatically once the pwm period completes. This is because auto reload bit is off. That's the main idea of this patch so that PWM period is completed after disabling, else PWM is stopped abruptly.
Not sure why it is not happening in your case. If you think it is not needed, I can drop this patch and add a limitation saying that PWM gets disabled immediately without completing the current cycle.
Thanks and regards,
Lokesh
Re: [PATCH v2 4/6] pwm: omap-dmtimer: Fix pwm disabling sequence
Quoted 48 lines · Lokesh Vutla
Hi Tony,
[...snip...]
Quoted 27 lines
Quoted 19 lines
Quoted 10 lines
Quoted 10 lines
drivers/pwm/pwm-omap-dmtimer.c +7
-1+/* +* Disable auto reload so that the current cycle gets completed and +* then the counter stops. +*/ mutex_lock (&omap->mutex); - omap->pdata->stop (omap->dm_timer); + omap->pdata->set_pwm(omap->dm_timer, + pwm_get_polarity(pwm) == PWM_POLARITY_INVERSED, + true, OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE,Quoted 8 lines
drivers/pwm/pwm-omap-dmtimer.c static void pwm_omap_dmtimer_disable(struct pwm_chip *chip, · line 107
Quoted 4 lines
drivers/pwm/pwm-omap-dmtimer.c +2
-0+ false); +mutex_unlock (&omap->mutex); }I'm seeing an issue with this patch where after use something is left on and power consumption stays higher by about 30 mW after use.
Quoted 5 lines
Interesting...What is the PWM period and duty cycle in the test case? Can you dump the following registers before and after disabling:
- TLDR
- TMAR
- TCLRHere's the state dumped before and after in
omap_dm_timer_set_pwm():Quoted 9 lines
omap_timer4803e000.timer: XXXset_pwmbefore: tldr:fffffeb8tmar: fffffffe tclr: 00000040omap_timer4803e000.timer: XXXset_pwmafter: tldr:fffffeb8tmar: fffffffe tclr: 00001842omap_timer4013e000.timer: XXXset_pwmbefore: tldr:fffffeb8tmar: fffffffe tclr: 00000040omap_timer4013e000.timer: XXXset_pwmafter: tldr:fffffeb8tmar: fffffffe tclr: 00001842omap_timer4013e000.timer: XXXset_pwmbefore: tldr:fffffeb8tmar: fffffffe tclr: 00001843omap_timer4013e000.timer: XXXset_pwmafter: tldr:fffffeb8tmar: fffffffe tclr: 00001841omap_timer4803e000.timer: XXXset_pwmbefore: tldr:fffffeb8tmar: fffffffe tclr: 00001843omap_timer4803e000.timer: XXXset_pwmafter: tldr:fffffeb8tmar: fffffffe tclr: 00001841Looking at the registers:
period = 327 *(1000/clk_freq in MHz) nsduty_cycle= perioid.I did simulate this behavior on BeagleBoneBlack on timer7. PWM is going down after disabling.
Quoted 6 lines
Quoted 1 line
So looks like the start bit is still enabled after use?
Right, that is expected. The start bit gets disabled automatically once the pwm period completes. This is because auto reload bit is off. That's the main idea of this patch so that PWM period is completed after disabling, else PWM is stopped abruptly.
OK
Quoted 3 lines
Not sure why it is not happening in your case. If you think it is not needed, I can drop this patch and add a limitation saying that PWM gets disabled immediately without completing the current cycle.
Could it be that we now have the cpu_pm notifier restore something invalid after exiting idle that restarts the counter?
Regards,
Tony
Re: [PATCH v2 4/6] pwm: omap-dmtimer: Fix pwm disabling sequence
Quoted 56 lines · Tony Lindgren
Quoted 48 lines · Lokesh Vutla
Hi Tony,
[...snip...]
Quoted 27 lines
Quoted 19 lines
Quoted 10 lines
Quoted 10 lines
drivers/pwm/pwm-omap-dmtimer.c +7
-1+/* +* Disable auto reload so that the current cycle gets completed and +* then the counter stops. +*/ mutex_lock (&omap->mutex); - omap->pdata->stop (omap->dm_timer); + omap->pdata->set_pwm(omap->dm_timer, + pwm_get_polarity(pwm) == PWM_POLARITY_INVERSED, + true, OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE,Quoted 8 lines
drivers/pwm/pwm-omap-dmtimer.c static void pwm_omap_dmtimer_disable(struct pwm_chip *chip, · line 107
Quoted 4 lines
drivers/pwm/pwm-omap-dmtimer.c +2
-0+ false); +mutex_unlock (&omap->mutex); }I'm seeing an issue with this patch where after use something is left on and power consumption stays higher by about 30 mW after use.
Quoted 5 lines
Interesting...What is the PWM period and duty cycle in the test case? Can you dump the following registers before and after disabling:
- TLDR
- TMAR
- TCLRHere's the state dumped before and after in
omap_dm_timer_set_pwm():Quoted 9 lines
omap_timer4803e000.timer: XXXset_pwmbefore: tldr:fffffeb8tmar: fffffffe tclr: 00000040omap_timer4803e000.timer: XXXset_pwmafter: tldr:fffffeb8tmar: fffffffe tclr: 00001842omap_timer4013e000.timer: XXXset_pwmbefore: tldr:fffffeb8tmar: fffffffe tclr: 00000040omap_timer4013e000.timer: XXXset_pwmafter: tldr:fffffeb8tmar: fffffffe tclr: 00001842omap_timer4013e000.timer: XXXset_pwmbefore: tldr:fffffeb8tmar: fffffffe tclr: 00001843omap_timer4013e000.timer: XXXset_pwmafter: tldr:fffffeb8tmar: fffffffe tclr: 00001841omap_timer4803e000.timer: XXXset_pwmbefore: tldr:fffffeb8tmar: fffffffe tclr: 00001843omap_timer4803e000.timer: XXXset_pwmafter: tldr:fffffeb8tmar: fffffffe tclr: 00001841Looking at the registers:
period = 327 *(1000/clk_freq in MHz) nsduty_cycle= perioid.I did simulate this behavior on BeagleBoneBlack on timer7. PWM is going down after disabling.
Quoted 6 lines
Quoted 1 line
So looks like the start bit is still enabled after use?
Right, that is expected. The start bit gets disabled automatically once the pwm period completes. This is because auto reload bit is off. That's the main idea of this patch so that PWM period is completed after disabling, else PWM is stopped abruptly.
Quoted 8 lines
OK
Quoted 3 lines
Not sure why it is not happening in your case. If you think it is not needed, I can drop this patch and add a limitation saying that PWM gets disabled immediately without completing the current cycle.
Could it be that we now have the
cpu_pmnotifier restore something invalid after exiting idle that restarts the counter?
If that's the case, mis behavior should have happened without this patch as well.
Is it possible for you to dump the registers when you are observing higher power consumption after the use?
However, I see an issue with the patch itself as pm_runtime is not disabled after the pwm is stopped. Not sure how that could be nullified with this approach.
Thanks and regards,
Lokesh
Re: [PATCH v2 4/6] pwm: omap-dmtimer: Fix pwm disabling sequence
Quoted 61 lines · Lokesh Vutla
Quoted 58 lines · Tony Lindgren
Quoted 48 lines · Lokesh Vutla
Hi Tony,
[...snip...]
Quoted 27 lines
Quoted 19 lines
Quoted 10 lines
Quoted 10 lines
(quoted diff) +7
-1+ /* + * Disable auto reload so that the current cycle gets completed and + * then the counter stops. + */ mutex_lock(&omap->mutex); - omap->pdata->stop(omap->dm_timer); + omap->pdata->set_pwm(omap->dm_timer, + pwm_get_polarity(pwm) == PWM_POLARITY_INVERSED, + true, OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE,Quoted 8 lines
Review
Quoted 4 lines
(quoted diff) +2
-0+ false); + mutex_unlock(&omap->mutex); }I'm seeing an issue with this patch where after use something is left on and power consumption stays higher by about 30 mW after use.
Quoted 5 lines
Interesting...What is the PWM period and duty cycle in the test case? Can you dump the following registers before and after disabling:
- TLDR
- TMAR
- TCLRHere's the state dumped before and after in
omap_dm_timer_set_pwm():Quoted 9 lines
omap_timer4803e000.timer: XXXset_pwmbefore: tldr:fffffeb8tmar: fffffffe tclr: 00000040omap_timer4803e000.timer: XXXset_pwmafter: tldr:fffffeb8tmar: fffffffe tclr: 00001842omap_timer4013e000.timer: XXXset_pwmbefore: tldr:fffffeb8tmar: fffffffe tclr: 00000040omap_timer4013e000.timer: XXXset_pwmafter: tldr:fffffeb8tmar: fffffffe tclr: 00001842omap_timer4013e000.timer: XXXset_pwmbefore: tldr:fffffeb8tmar: fffffffe tclr: 00001843omap_timer4013e000.timer: XXXset_pwmafter: tldr:fffffeb8tmar: fffffffe tclr: 00001841omap_timer4803e000.timer: XXXset_pwmbefore: tldr:fffffeb8tmar: fffffffe tclr: 00001843omap_timer4803e000.timer: XXXset_pwmafter: tldr:fffffeb8tmar: fffffffe tclr: 00001841Looking at the registers:
period = 327 *(1000/clk_freq in MHz) nsduty_cycle= perioid.I did simulate this behavior on BeagleBoneBlack on timer7. PWM is going down after disabling.
Quoted 6 lines
Quoted 1 line
So looks like the start bit is still enabled after use?
Right, that is expected. The start bit gets disabled automatically once the pwm period completes. This is because auto reload bit is off. That's the main idea of this patch so that PWM period is completed after disabling, else PWM is stopped abruptly.
OK
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Not sure why it is not happening in your case. If you think it is not needed, I can drop this patch and add a limitation saying that PWM gets disabled immediately without completing the current cycle.
Could it be that we now have the
cpu_pmnotifier restore something invalid after exiting idle that restarts the counter?If that's the case, mis behavior should have happened without this patch as well.
Hmm but without this patch we stop the timer so enable bit is cleared before we ever save context. I think now we can have enable bit still on, save the context, and keep restoring the enable bit that never has a chance to clear if we do this at a fast enough rate.
Quoted 2 lines
Is it possible for you to dump the registers when you are observing higher power consumption after the use?
Well they seem to be the same as in the dump above, here are the regs dumped after use with chirping happening:
$ sudo rwmem 0x4803e000+0x60 0x4803e000 = 0x4fff1301 0x4803e004 = 0000000000 0x4803e008 = 0000000000 0x4803e00c = 0000000000 0x4803e010 = 0x0000000c 0x4803e014 = 0000000000 0x4803e018 = 0000000000 0x4803e01c = 0000000000 0x4803e020 = 0000000000 0x4803e024 = 0x00000003 0x4803e028 = 0000000000 0x4803e02c = 0000000000 0x4803e030 = 0000000000 0x4803e034 = 0000000000 0x4803e038 = 0x00001841 0x4803e03c = 0x00000402 0x4803e040 = 0xfffffeb8 0x4803e044 = 0xffffffff 0x4803e048 = 0000000000 0x4803e04c = 0xfffffffe 0x4803e050 = 0000000000 0x4803e054 = 0000000000 0x4803e058 = 0000000000 0x4803e05c = 0000000000
$ sudo rwmem 0x4013e000+0x60 0x4013e000 = 0x4fff0301 0x4013e004 = 0000000000 0x4013e008 = 0000000000 0x4013e00c = 0000000000 0x4013e010 = 0000000000 0x4013e014 = 0000000000 0x4013e018 = 0000000000 0x4013e01c = 0000000000 0x4013e020 = 0000000000 0x4013e024 = 0x00000003 0x4013e028 = 0000000000 0x4013e02c = 0000000000 0x4013e030 = 0000000000 0x4013e034 = 0000000000 0x4013e038 = 0x00001841 0x4013e03c = 0x00000407 0x4013e040 = 0xfffffeb8 0x4013e044 = 0xffffffff 0x4013e048 = 0000000000 0x4013e04c = 0xfffffffe 0x4013e050 = 0000000000 0x4013e054 = 0000000000 0x4013e058 = 0000000000 0x4013e05c = 0000000000
So looks like the enable bit is never cleared now.
Quoted 2 lines
However, I see an issue with the patch itself as
pm_runtimeis not disabled after the pwm is stopped. Not sure how that could be nullified with this approach.
Hmm yeah not sure what could be used to clear things when the current cycle is completed unless there's some interrupt for it.
Regards,
Tony
Re: [PATCH v2 4/6] pwm: omap-dmtimer: Fix pwm disabling sequence
Quoted 7 lines · Tony Lindgren
Quoted 2 lines · Lokesh Vutla
However, I see an issue with the patch itself as
pm_runtimeis not disabled after the pwm is stopped. Not sure how that could be nullified with this approach.Hmm yeah not sure what could be used to clear things when the current cycle is completed unless there's some interrupt for it.
You could enable pm_runtime_use_autosuspend() for pwm use, then set the timeout to the cycle length, then in the runtime_suspend make sure the enable bit is cleared if requested.
But this too seems inaccurate, it would be best to clear the enable bit on some cycle completion interrupt if such thing is available.
Regards,
Tony
Re: [PATCH v2 4/6] pwm: omap-dmtimer: Fix pwm disabling sequence
Quoted 9 lines · Tony Lindgren
Quoted 7 lines · Tony Lindgren
Quoted 2 lines · Lokesh Vutla
However, I see an issue with the patch itself as
pm_runtimeis not disabled after the pwm is stopped. Not sure how that could be nullified with this approach.Hmm yeah not sure what could be used to clear things when the current cycle is completed unless there's some interrupt for it.
Quoted 8 lines
You could enable
pm_runtime_use_autosuspend()for pwm use, then set the timeout to the cycle length, then in theruntime_suspendmake sure the enable bit is cleared if requested.But this too seems inaccurate, it would be best to clear the enable bit on some cycle completion interrupt if such thing is available.
I think enabling pm_runtime_use_autosuspend() for pwm, adding a flag for pwm_enabled, and blocking cpu_pm if pwm_enabled is set might do the trick though. Then clear pwm_enabled flag in runtime_suspend if set.
This depend on cpuidle respecting NOTIFY_BAD that I fixed in the recent thread:
[PATCH 0/3] Block idle in gpio-omap with cpu_pm
Regards,
Tony
PATCH v2 5/6 pwm: omap-dmtimer: Do not disable pwm before changing period/duty_cycle
In reply to Lokesh VutlaOnly the Timer control register(TCLR) cannot be updated when the timer is running. Registers like Counter register(TCRR), loader register(TLDR), match register(TMAR) can be updated when the counter is running. Since TCLR is not updated in pwm_omap_dmtimer_config(), do not stop the timer for period/duty_cycle update.
--- drivers/pwm/pwm-omap-dmtimer.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-)
drivers/pwm/pwm-omap-dmtimer.c +9 -14
@@ -15,6 +15,15 @@* reloaded with the load value and the pwm output goes up. * When counter matches with match register, the output goes down. * Reference Manual: http://www.ti.com/lit/ug/spruh73q/spruh73q.pdf +* +* Limitations: +* - When PWM is running and changing both duty cycle and period, +* we cannot prevent in software that the output might produce +* a period with mixed settings. Especially when period/duty_cyle +* is updated while the pwm pin is high, current pwm period/duty_cycle +* can get updated as below based on the current timer counter: +* - period for current cycle = current_period + new period +* - duty_cycle for current period = current period + new duty_cycle. */ #include <linux/clk.h>
@@ -115,7 +124,6 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,u32 load_value, match_value;struct clk *fclk;unsigned long clk_rate; -bool timer_active;dev_dbg (chip->dev,"requested duty cycle: %d ns, period: %d ns\n" , duty_ns, period_ns);
@@ -191,25 +199,12 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip, load_value = (DM_TIMER_MAX - period_cycles) +1 ; match_value = load_value + duty_cycles -1 ; -/* -* We MUST stop the associated dual-mode timer before attempting to -* write its registers, but calls to omap_dm_timer_start/stop must -* be balanced so check if timer is active before calling timer_stop. -*/ - timer_active =pm_runtime_active (&omap->dm_timer_pdev->dev); -if (timer_active) - omap->pdata->stop (omap->dm_timer); - omap->pdata->set_load (omap->dm_timer, load_value); omap->pdata->set_match (omap->dm_timer, true, match_value);dev_dbg (chip->dev,"load value: %#08x (%d), match value: %#08x (%d)\n" , load_value, load_value, match_value, match_value); -/* If config was called while timer was running it must be reenabled. */ -if (timer_active) -pwm_omap_dmtimer_start (omap); -mutex_unlock (&omap->mutex);return 0 ;
Signature · 1 line
2.23.0
Re: [PATCH v2 5/6] pwm: omap-dmtimer: Do not disable pwm before changing period/duty_cycle
Quoted 5 lines · Lokesh Vutla
Only the Timer control register(TCLR) cannot be updated when the timer is running. Registers like Counter register(TCRR), loader register(TLDR), match register(TMAR) can be updated when the counter is running. Since TCLR is not updated in
pwm_omap_dmtimer_config(), do not stop the timer for period/duty_cycle update.
Still works for me with "pwm: omap-dmtimer: Fix pwm disabling sequence" patch left out:
PATCH v2 6/6 pwm: omap-dmtimer: Implement .apply callback
In reply to Lokesh VutlaImplement .apply callback and drop the legacy callbacks(enable, disable, config, set_polarity). In .apply() check for the current hardware status before changing the pwm configuration.
--- drivers/pwm/pwm-omap-dmtimer.c | 215 ++++++++++++++++++++++++--------- 1 file changed, 158 insertions(+), 57 deletions(-)
drivers/pwm/pwm-omap-dmtimer.c +158 -57
@@ -24,6 +24,11 @@* can get updated as below based on the current timer counter: * - period for current cycle = current_period + new period * - duty_cycle for current period = current period + new duty_cycle. +* - PWM OMAP DM timer cannot change the polarity when pwm is active. When +* user requests a change in polarity when in active state: +* - PWM is stopped abruptly(without completing the current cycle) +* - Polarity is changed +* - A fresh cycle is started. */ #include <linux/clk.h>
@@ -44,8 +49,18 @@#define DM_TIMER_LOAD_MIN 0xfffffffe#define DM_TIMER_MAX 0xffffffff +/** +* struct pwm_omap_dmtimer_chip - Structure representing a pwm chip +* corresponding to omap dmtimer. +* @chip: PWM chip structure representing PWM controller +* @mutex: Mutex to protect pwm apply state +* @dm_timer: Pointer to omap dm timer. +* @pdata: Pointer to omap dm timer ops. +* dm_timer_pdev: Pointer to omap dm timer platform device +*/ struct pwm_omap_dmtimer_chip {struct pwm_chip chip; +/* Mutex to protect pwm apply state */ struct mutex mutex;struct omap_dm_timer *dm_timer;const struct omap_dm_timer_ops *pdata;
@@ -58,11 +73,22 @@ to_pwm_omap_dmtimer_chip(struct pwm_chip *chip) return container_of(chip, struct pwm_omap_dmtimer_chip, chip); } +/** +* pwm_omap_dmtimer_get_clock_cycles() - Get clock cycles in a time frame +* @clk_rate: pwm timer clock rate +* @ns: time frame in nano seconds. +* +* Return number of clock cycles in a given period(ins ns). +*/ static u32 pwm_omap_dmtimer_get_clock_cycles (unsigned long clk_rate,int ns) {return DIV_ROUND_CLOSEST_ULL ((u64 )clk_rate * ns,NSEC_PER_SEC ); } +/** +* pwm_omap_dmtimer_start() - Start the pwm omap dm timer in pwm mode +* @omap: Pointer to pwm omap dm timer chip +*/ static void pwm_omap_dmtimer_start (struct pwm_omap_dmtimer_chip *omap) {/*
@@ -80,41 +106,70 @@ static void pwm_omap_dmtimer_start(struct pwm_omap_dmtimer_chip *omap) omap->pdata->start (omap->dm_timer); } -static int pwm_omap_dmtimer_enable (struct pwm_chip *chip, -struct pwm_device *pwm) +/** +* pwm_omap_dmtimer_is_enabled() - Detect if the pwm is enabled. +* @omap: Pointer to pwm omap dm timer chip +* +* Note: PWM is considered as enabled only when timer is counting and +* auto-reload feature is enabled. +* +* Return true if pwm is enabled else false. +*/ +static bool pwm_omap_dmtimer_is_enabled (struct pwm_omap_dmtimer_chip *omap) { -struct pwm_omap_dmtimer_chip *omap =to_pwm_omap_dmtimer_chip (chip); +u32 status; -mutex_lock (&omap->mutex); - omap->pdata->set_pwm (omap->dm_timer, -pwm_get_polarity (pwm) ==PWM_POLARITY_INVERSED , - true,OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE , - true); + status = omap->pdata->get_pwm_status (omap->dm_timer); -pwm_omap_dmtimer_start (omap); -mutex_unlock (&omap->mutex); +return !!(status &OMAP_TIMER_CTRL_ST ) && + !!(status &OMAP_TIMER_CTRL_AR ); +} -return 0 ; +/** +* pwm_omap_dmtimer_is_completing() - Detect if the pwm is completing the +* last cycle. +* @omap: Pointer to pwm omap dm timer chip +* +* Note: PWM is considered as completing only when timer is counting and +* auto-reload feature is disabled. +* +* Return true if pwm is completing the last cycle else false. +*/ +static bool pwm_omap_dmtimer_is_completing (struct pwm_omap_dmtimer_chip *omap) +{ +u32 status; + + status = omap->pdata->get_pwm_status (omap->dm_timer); + +return !!(status &OMAP_TIMER_CTRL_ST ) && + !(status &OMAP_TIMER_CTRL_AR ); } -static void pwm_omap_dmtimer_disable (struct pwm_chip *chip, -struct pwm_device *pwm) +/** +* pwm_omap_dmtimer_polarity() - Detect the polarity of pwm. +* @omap: Pointer to pwm omap dm timer chip +* +* Return the polarity of pwm. +*/ +static int pwm_omap_dmtimer_polarity (struct pwm_omap_dmtimer_chip *omap) { -struct pwm_omap_dmtimer_chip *omap =to_pwm_omap_dmtimer_chip (chip); +u32 status; -/* -* Disable auto reload so that the current cycle gets completed and -* then the counter stops. -*/ -mutex_lock (&omap->mutex); - omap->pdata->set_pwm (omap->dm_timer, -pwm_get_polarity (pwm) ==PWM_POLARITY_INVERSED , - true,OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE , - false); + status = omap->pdata->get_pwm_status (omap->dm_timer); -mutex_unlock (&omap->mutex); +return !!(status &OMAP_TIMER_CTRL_SCPWM ); } +/** +* pwm_omap_dmtimer_config() - Update the configuration of pwm omap dm timer +* @chip: Pointer to PWM controller +* @pwm: Pointer to PWM channel +* @duty_ns: New duty cycle in nano seconds +* @period_ns: New period in nano seconds +* +* Return 0 if successfully changed the period/duty_cycle else appropriate +* error. +*/ static int pwm_omap_dmtimer_config (struct pwm_chip *chip,struct pwm_device *pwm,int duty_ns,int period_ns)
@@ -122,30 +177,26 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,struct pwm_omap_dmtimer_chip *omap =to_pwm_omap_dmtimer_chip (chip);u32 period_cycles, duty_cycles;u32 load_value, match_value; -struct clk *fclk;unsigned long clk_rate; +struct clk *fclk;dev_dbg (chip->dev,"requested duty cycle: %d ns, period: %d ns\n" , duty_ns, period_ns); -mutex_lock (&omap->mutex);if (duty_ns ==pwm_get_duty_cycle (pwm) && - period_ns ==pwm_get_period (pwm)) { -/* No change - don't cause any transients. */ -mutex_unlock (&omap->mutex); + period_ns ==pwm_get_period (pwm))return 0 ; - } fclk = omap->pdata->get_fclk (omap->dm_timer);if (!fclk) {dev_err (chip->dev,"invalid pmtimer fclk\n" ); - goto err_einval; +return -EINVAL ; } clk_rate =clk_get_rate (fclk);if (!clk_rate) {dev_err (chip->dev,"invalid pmtimer fclk rate\n" ); - goto err_einval; +return -EINVAL ; }dev_dbg (chip->dev,"clk rate: %luHz\n" , clk_rate);
@@ -173,7 +224,7 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,dev_info (chip->dev,"period %d ns too short for clock rate %lu Hz\n" , period_ns, clk_rate); - goto err_einval; +return -EINVAL ; }if (duty_cycles <1 ) {
@@ -205,55 +256,104 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,dev_dbg (chip->dev,"load value: %#08x (%d), match value: %#08x (%d)\n" , load_value, load_value, match_value, match_value); -mutex_unlock (&omap->mutex); -return 0 ; - -err_einval: -mutex_unlock (&omap->mutex); - -return -EINVAL ; } -static int pwm_omap_dmtimer_set_polarity (struct pwm_chip *chip, -struct pwm_device *pwm, -enum pwm_polarity polarity) +/** +* pwm_omap_dmtimer_set_polarity() - Changes the polarity of the pwm dm timer. +* @chip: Pointer to PWM controller +* @pwm: Pointer to PWM channel +* @polarity: New pwm polarity to be set +*/ +static void pwm_omap_dmtimer_set_polarity (struct pwm_chip *chip, +struct pwm_device *pwm, +enum pwm_polarity polarity) {struct pwm_omap_dmtimer_chip *omap =to_pwm_omap_dmtimer_chip (chip); +bool enabled; + +/* Disable the PWM before changing the polarity. */ + enabled =pwm_omap_dmtimer_is_enabled (omap); +if (enabled ||pwm_omap_dmtimer_is_completing (omap)) + omap->pdata->stop (omap->dm_timer); -/* -* PWM core will not call set_polarity while PWM is enabled so it's -* safe to reconfigure the timer here without stopping it first. -*/ -mutex_lock (&omap->mutex); omap->pdata->set_pwm (omap->dm_timer, polarity ==PWM_POLARITY_INVERSED , true,OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE , true); + +if (enabled) +pwm_omap_dmtimer_start (omap); +} + +/** +* pwm_omap_dmtimer_apply() - Changes the state of the pwm omap dm timer. +* @chip: Pointer to PWM controller +* @pwm: Pointer to PWM channel +* @state: New state to apply +* +* Return 0 if successfully changed the state else appropriate error. +*/ +static int pwm_omap_dmtimer_apply (struct pwm_chip *chip, +struct pwm_device *pwm, +const struct pwm_state *state) +{ +struct pwm_omap_dmtimer_chip *omap =to_pwm_omap_dmtimer_chip (chip); +int ret =0 ; + +mutex_lock (&omap->mutex); + +if (pwm_omap_dmtimer_is_enabled (omap) && !state->enabled) { +/* +* Disable auto reload so that the current cycle gets completed +* and then the counter stops. +*/ + omap->pdata->set_pwm (omap->dm_timer, +pwm_get_polarity (pwm) ==PWM_POLARITY_INVERSED , + true,OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE , + false); + goto unlock_mutex; + } + +if (pwm_omap_dmtimer_polarity (omap) != state->polarity) +pwm_omap_dmtimer_set_polarity (chip, pwm, state->polarity); + + ret =pwm_omap_dmtimer_config (chip, pwm, state->duty_cycle, + state->period); +if (ret) + goto unlock_mutex; + +if (!pwm_omap_dmtimer_is_enabled (omap) && state->enabled) { + omap->pdata->set_pwm (omap->dm_timer, + state->polarity ==PWM_POLARITY_INVERSED , + true, +OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE , + true); +pwm_omap_dmtimer_start (omap); + } + +unlock_mutex:mutex_unlock (&omap->mutex); -return 0 ; +return ret; }static const struct pwm_ops pwm_omap_dmtimer_ops = { - .enable = pwm_omap_dmtimer_enable, - .disable = pwm_omap_dmtimer_disable, - .config = pwm_omap_dmtimer_config, - .set_polarity = pwm_omap_dmtimer_set_polarity, + .apply = pwm_omap_dmtimer_apply, .owner =THIS_MODULE , };static int pwm_omap_dmtimer_probe (struct platform_device *pdev) {struct device_node *np = pdev->dev.of_node; -struct device_node *timer; -struct platform_device *timer_pdev; -struct pwm_omap_dmtimer_chip *omap;struct dmtimer_platform_data *timer_pdata;const struct omap_dm_timer_ops *pdata; +struct platform_device *timer_pdev; +struct pwm_omap_dmtimer_chip *omap;struct omap_dm_timer *dm_timer; -u32 v; +struct device_node *timer;int ret =0 ; +u32 v; timer =of_parse_phandle (np,"ti,timers" ,0 );if (!timer)
@@ -286,6 +386,7 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev) !pdata->set_load || !pdata->set_match || !pdata->set_pwm || + !pdata->get_pwm_status || !pdata->set_prescaler || !pdata->write_counter) {dev_err (&pdev->dev,"Incomplete dmtimer pdata structure\n" );
Signature · 1 line
2.23.0