Input: ads7846: pdata cleanups and devm init
Subsystems (3)
v4 cover Input: ads7846: pdata cleanups and devm init
Hi,
This is v4 of the patches to bring devm initialization to the ads7846 driver. I left the gpiod conversion patch out for now as it needs more work, and it's also independent of the other changes.
v3:
* Added a patch to remove custom filter handling from pdata
* Added devm_add_action_or_reset() for regulator state maintaining
* Addressed minor nits pointed out by Marco Felsch
v4:
* Call ads7846_stop() rather than ads7846_disable() in the unbind path to avoid regulator refcount confusion, Thanks to Marco Felsch.
Daniel Mack (3):
Input: ads7846: Add short-hand for spi->dev in probe() function
Input: ads7846: Remove custom filter handling functions from pdata
Input: ads7846: Switch to devm initialization
drivers/input/touchscreen/ads7846.c | 187 +++++++++++----------------- include/linux/spi/ads7846.h | 15 --- 2 files changed, 73 insertions(+), 129 deletions(-)
Signature · 1 line
2.26.2
PATCH v4 1/3 Input: ads7846: Add short-hand for spi->dev in probe() function
This will make the code a bit more terse.
No functional change intended.
--- drivers/input/touchscreen/ads7846.c | 45 +++++++++++++++-------------- 1 file changed, 23 insertions(+), 22 deletions(-)
drivers/input/touchscreen/ads7846.c +23 -22
@@ -1265,20 +1265,21 @@ static int ads7846_probe(struct spi_device *spi) {const struct ads7846_platform_data *pdata;struct ads7846 *ts; +struct device *dev = &spi->dev;struct ads7846_packet *packet;struct input_dev *input_dev;unsigned long irq_flags;int err;if (!spi->irq) { -dev_dbg (&spi->dev,"no IRQ?\n" ); +dev_dbg (dev,"no IRQ?\n" );return -EINVAL ; }/* don't exceed max specified sample rate */ if (spi->max_speed_hz > (125000 *SAMPLE_BITS )) { -dev_err (&spi->dev,"f(sample) %d KHz?\n" , - (spi->max_speed_hz/SAMPLE_BITS )/1000 ); +dev_err (dev,"f(sample) %d KHz?\n" , + (spi->max_speed_hz/SAMPLE_BITS )/1000 );return -EINVAL ; }
@@ -1310,9 +1311,9 @@ static int ads7846_probe(struct spi_device *spi)mutex_init (&ts->lock);init_waitqueue_head (&ts->wait); - pdata =dev_get_platdata (&spi->dev); + pdata =dev_get_platdata (dev);if (!pdata) { - pdata =ads7846_probe_dt (&spi->dev); + pdata =ads7846_probe_dt (dev);if (IS_ERR (pdata)) { err =PTR_ERR (pdata); goto err_free_mem;
@@ -1354,12 +1355,12 @@ static int ads7846_probe(struct spi_device *spi) ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync; -snprintf (ts->phys,sizeof (ts->phys),"%s/input0" ,dev_name (&spi->dev)); +snprintf (ts->phys,sizeof (ts->phys),"%s/input0" ,dev_name (dev));snprintf (ts->name,sizeof (ts->name),"ADS%d Touchscreen" , ts->model); input_dev->name = ts->name; input_dev->phys = ts->phys; - input_dev->dev.parent = &spi->dev; + input_dev->dev.parent = dev; input_dev->evbit[0 ] =BIT_MASK (EV_KEY ) |BIT_MASK (EV_ABS ); input_dev->keybit[BIT_WORD (BTN_TOUCH )] =BIT_MASK (BTN_TOUCH );
@@ -1393,16 +1394,16 @@ static int ads7846_probe(struct spi_device *spi)ads7846_setup_spi_msg (ts, pdata); - ts->reg =regulator_get (&spi->dev,"vcc" ); + ts->reg =regulator_get (dev,"vcc" );if (IS_ERR (ts->reg)) { err =PTR_ERR (ts->reg); -dev_err (&spi->dev,"unable to get regulator: %d\n" , err); +dev_err (dev,"unable to get regulator: %d\n" , err); goto err_free_gpio; } err =regulator_enable (ts->reg);if (err) { -dev_err (&spi->dev,"unable to enable regulator: %d\n" , err); +dev_err (dev,"unable to enable regulator: %d\n" , err); goto err_put_regulator; }
@@ -1410,18 +1411,18 @@ static int ads7846_probe(struct spi_device *spi) irq_flags |=IRQF_ONESHOT ; err =request_threaded_irq (spi->irq, ads7846_hard_irq, ads7846_irq, - irq_flags, spi->dev.driver->name, ts); + irq_flags, dev->driver->name, ts);if (err && !pdata->irq_flags) { -dev_info (&spi->dev, +dev_info (dev,"trying pin change workaround on irq %d\n" , spi->irq); irq_flags |=IRQF_TRIGGER_RISING ; err =request_threaded_irq (spi->irq, ads7846_hard_irq, ads7846_irq, - irq_flags, spi->dev.driver->name, ts); + irq_flags, dev->driver->name, ts); }if (err) { -dev_dbg (&spi->dev,"irq %d busy?\n" , spi->irq); +dev_dbg (dev,"irq %d busy?\n" , spi->irq); goto err_disable_regulator; }
@@ -1429,18 +1430,18 @@ static int ads7846_probe(struct spi_device *spi)if (err) goto err_free_irq; -dev_info (&spi->dev,"touchscreen, irq %d\n" , spi->irq); +dev_info (dev,"touchscreen, irq %d\n" , spi->irq);/* * Take a first sample, leaving nPENIRQ active and vREF off; avoid * the touchscreen, in case it's not connected. */ if (ts->model ==7845 ) -ads7845_read12_ser (&spi->dev,PWRDOWN ); +ads7845_read12_ser (dev,PWRDOWN );else - (void )ads7846_read12_ser (&spi->dev,READ_12BIT_SER (vaux)); + (void )ads7846_read12_ser (dev,READ_12BIT_SER (vaux)); - err =sysfs_create_group (&spi->dev.kobj, &ads784x_attr_group); + err =sysfs_create_group (&dev->kobj, &ads784x_attr_group);if (err) goto err_remove_hwmon;
@@ -1448,19 +1449,19 @@ static int ads7846_probe(struct spi_device *spi)if (err) goto err_remove_attr_group; -device_init_wakeup (&spi->dev, pdata->wakeup); +device_init_wakeup (dev, pdata->wakeup);/* * If device does not carry platform data we must have allocated it * when parsing DT data. */ -if (!dev_get_platdata (&spi->dev)) -devm_kfree (&spi->dev, (void *)pdata); +if (!dev_get_platdata (dev)) +devm_kfree (dev, (void *)pdata);return 0 ; err_remove_attr_group: -sysfs_remove_group (&spi->dev.kobj, &ads784x_attr_group); +sysfs_remove_group (&dev->kobj, &ads784x_attr_group); err_remove_hwmon:ads784x_hwmon_unregister (spi, ts); err_free_irq:
Signature · 1 line
2.26.2
PATCH v4 2/3 Input: ads7846: Remove custom filter handling functions from pdata
In reply to Daniel MackThe functions in the platform data struct to initialize, cleanup and apply custom filters are not in use by any mainline board.
Remove support for them to pave the road for more cleanups to come.
The enum was moved as it has no users outside of the driver code itself.
--- drivers/input/touchscreen/ads7846.c | 25 ++++++++----------------- include/linux/spi/ads7846.h | 15 --------------- 2 files changed, 8 insertions(+), 32 deletions(-)
drivers/input/touchscreen/ads7846.c +8 -17
@@ -139,13 +139,18 @@ struct ads7846 {int (*filter)(void *data,int data_idx,int *val);void *filter_data; -void (*filter_cleanup)(void *data);int (*get_pendown_state)(void );int gpio_pendown;void (*wait_for_sync)(void ); }; +enum ads7846_filter { +ADS7846_FILTER_OK , +ADS7846_FILTER_REPEAT , +ADS7846_FILTER_IGNORE , +}; +/* leave chip selected when we're done, for quicker re-select? */ #if 0 #define CS_CHANGE (xfer) ((xfer).cs_change = 1)
@@ -1325,15 +1330,7 @@ static int ads7846_probe(struct spi_device *spi) ts->x_plate_ohms = pdata->x_plate_ohms ? :400 ; ts->vref_mv = pdata->vref_mv; -if (pdata->filter !=NULL ) { -if (pdata->filter_init !=NULL ) { - err = pdata->filter_init (pdata, &ts->filter_data); -if (err <0 ) - goto err_free_mem; - } - ts->filter = pdata->filter; - ts->filter_cleanup = pdata->filter_cleanup; - }else if (pdata->debounce_max) { +if (pdata->debounce_max) { ts->debounce_max = pdata->debounce_max;if (ts->debounce_max <2 ) ts->debounce_max =2 ;
@@ -1347,7 +1344,7 @@ static int ads7846_probe(struct spi_device *spi) err =ads7846_setup_pendown (spi, ts, pdata);if (err) - goto err_cleanup_filter; + goto err_free_mem;if (pdata->penirq_recheck_delay_usecs) ts->penirq_recheck_delay_usecs =
@@ -1473,9 +1470,6 @@ static int ads7846_probe(struct spi_device *spi) err_free_gpio:if (!ts->get_pendown_state)gpio_free (ts->gpio_pendown); - err_cleanup_filter: -if (ts->filter_cleanup) - ts->filter_cleanup (ts->filter_data); err_free_mem:input_free_device (input_dev);kfree (packet);
@@ -1506,9 +1500,6 @@ static int ads7846_remove(struct spi_device *spi)gpio_free (ts->gpio_pendown); } -if (ts->filter_cleanup) - ts->filter_cleanup (ts->filter_data); -kfree (ts->packet);kfree (ts);
include/linux/spi/ads7846.h +0 -15
@@ -1,17 +1,6 @@/* SPDX-License-Identifier: GPL-2.0 */ /* linux/spi/ads7846.h */ -/* Touchscreen characteristics vary between boards and models. The -* platform_data for the device's "struct device" holds this information. -* -* It's OK if the min/max values are zero. -*/ -enum ads7846_filter { -ADS7846_FILTER_OK , -ADS7846_FILTER_REPEAT , -ADS7846_FILTER_IGNORE , -}; -struct ads7846_platform_data {u16 model;/* 7843, 7845, 7846, 7873. */ u16 vref_delay_usecs;/* 0 for external vref; etc */
@@ -51,10 +40,6 @@ struct ads7846_platform_data {int gpio_pendown_debounce;/* platform specific debounce time for * the gpio_pendown */ int (*get_pendown_state)(void ); -int (*filter_init) (const struct ads7846_platform_data *pdata, -void **filter_data); -int (*filter) (void *filter_data,int data_idx,int *val); -void (*filter_cleanup)(void *filter_data);void (*wait_for_sync)(void );bool wakeup;unsigned long irq_flags;
Signature · 1 line
2.26.2
PATCH v4 3/3 Input: ads7846: Switch to devm initialization
In reply to Daniel MackThis simplies the code a lot and fixes some potential resource leaks in the error return paths.
--- drivers/input/touchscreen/ads7846.c | 125 ++++++++++------------------ 1 file changed, 46 insertions(+), 79 deletions(-)
drivers/input/touchscreen/ads7846.c +46 -79
@@ -98,10 +98,6 @@ struct ads7846 {struct spi_device *spi;struct regulator *reg; -#if IS_ENABLED (CONFIG_HWMON ) -struct device *hwmon; -#endif -u16 model;u16 vref_mv;u16 vref_delay_usecs;
@@ -513,6 +509,8 @@ __ATTRIBUTE_GROUPS(ads7846_attr);static int ads784x_hwmon_register (struct spi_device *spi,struct ads7846 *ts) { +struct device *hwmon; +/* hwmon sensors need a reference voltage */ switch (ts->model) {case 7846 :
@@ -533,17 +531,11 @@ static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts) break; } - ts->hwmon =hwmon_device_register_with_groups (&spi->dev, spi->modalias, - ts, ads7846_attr_groups); + hwmon =devm_hwmon_device_register_with_groups (&spi->dev, + spi->modalias, ts, + ads7846_attr_groups); -return PTR_ERR_OR_ZERO (ts->hwmon); -} - -static void ads784x_hwmon_unregister (struct spi_device *spi, -struct ads7846 *ts) -{ -if (ts->hwmon) -hwmon_device_unregister (ts->hwmon); +return PTR_ERR_OR_ZERO (hwmon); }#else
@@ -552,11 +544,6 @@ static inline int ads784x_hwmon_register(struct spi_device *spi, {return 0 ; } - -static inline void ads784x_hwmon_unregister (struct spi_device *spi, -struct ads7846 *ts) -{ -}#endif static ssize_t ads7846_pen_down_show(struct device *dev,
@@ -949,8 +936,8 @@ static int ads7846_setup_pendown(struct spi_device *spi, ts->get_pendown_state = pdata->get_pendown_state; }else if (gpio_is_valid (pdata->gpio_pendown)) { - err =gpio_request_one (pdata->gpio_pendown,GPIOF_IN , -"ads7846_pendown" ); + err =devm_gpio_request_one (&spi->dev, pdata->gpio_pendown, +GPIOF_IN ,"ads7846_pendown" );if (err) { dev_err(&spi->dev, "failed to request/setup pendown GPIO%d: %d\n",
@@ -1266,6 +1253,11 @@ static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev) }#endif +static void ads7846_regulator_disable (void *regulator) +{ +regulator_disable (regulator); +} +static int ads7846_probe (struct spi_device *spi) {const struct ads7846_platform_data *pdata;
@@ -1299,13 +1291,17 @@ static int ads7846_probe(struct spi_device *spi)if (err <0 )return err; - ts =kzalloc (sizeof (struct ads7846 ),GFP_KERNEL ); - packet =kzalloc (sizeof (struct ads7846_packet ),GFP_KERNEL ); - input_dev =input_allocate_device (); -if (!ts || !packet || !input_dev) { - err = -ENOMEM ; - goto err_free_mem; - } + ts =devm_kzalloc (dev,sizeof (struct ads7846 ),GFP_KERNEL ); +if (!ts) +return -ENOMEM ; + + packet =devm_kzalloc (dev,sizeof (struct ads7846_packet ),GFP_KERNEL ); +if (!packet) +return -ENOMEM ; + + input_dev =devm_input_allocate_device (dev); +if (!input_dev) +return -ENOMEM ;spi_set_drvdata (spi, ts);
@@ -1319,10 +1315,8 @@ static int ads7846_probe(struct spi_device *spi) pdata =dev_get_platdata (dev);if (!pdata) { pdata =ads7846_probe_dt (dev); -if (IS_ERR (pdata)) { - err =PTR_ERR (pdata); - goto err_free_mem; - } +if (IS_ERR (pdata)) +return PTR_ERR (pdata); } ts->model = pdata->model ? :7846 ;
@@ -1344,7 +1338,7 @@ static int ads7846_probe(struct spi_device *spi) err =ads7846_setup_pendown (spi, ts, pdata);if (err) - goto err_free_mem; +return err;if (pdata->penirq_recheck_delay_usecs) ts->penirq_recheck_delay_usecs =
@@ -1391,41 +1385,47 @@ static int ads7846_probe(struct spi_device *spi)ads7846_setup_spi_msg (ts, pdata); - ts->reg =regulator_get (dev,"vcc" ); + ts->reg =devm_regulator_get (dev,"vcc" );if (IS_ERR (ts->reg)) { err =PTR_ERR (ts->reg);dev_err (dev,"unable to get regulator: %d\n" , err); - goto err_free_gpio; +return err; } err =regulator_enable (ts->reg);if (err) {dev_err (dev,"unable to enable regulator: %d\n" , err); - goto err_put_regulator; +return err; } + err =devm_add_action_or_reset (dev, ads7846_regulator_disable, ts->reg); +if (err) +return err; + irq_flags = pdata->irq_flags ? :IRQF_TRIGGER_FALLING ; irq_flags |=IRQF_ONESHOT ; - err =request_threaded_irq (spi->irq, ads7846_hard_irq, ads7846_irq, - irq_flags, dev->driver->name, ts); + err =devm_request_threaded_irq (dev, spi->irq, + ads7846_hard_irq, ads7846_irq, + irq_flags, dev->driver->name, ts);if (err && !pdata->irq_flags) {dev_info (dev,"trying pin change workaround on irq %d\n" , spi->irq); irq_flags |=IRQF_TRIGGER_RISING ; - err =request_threaded_irq (spi->irq, - ads7846_hard_irq, ads7846_irq, - irq_flags, dev->driver->name, ts); + err =devm_request_threaded_irq (dev, spi->irq, + ads7846_hard_irq, ads7846_irq, + irq_flags, dev->driver->name, + ts); }if (err) {dev_dbg (dev,"irq %d busy?\n" , spi->irq); - goto err_disable_regulator; +return err; } err =ads784x_hwmon_register (spi, ts);if (err) - goto err_free_irq; +return err;dev_info (dev,"touchscreen, irq %d\n" , spi->irq);
@@ -1440,7 +1440,7 @@ static int ads7846_probe(struct spi_device *spi) err =sysfs_create_group (&dev->kobj, &ads784x_attr_group);if (err) - goto err_remove_hwmon; +return err; err =input_register_device (input_dev);if (err)
@@ -1459,21 +1459,7 @@ static int ads7846_probe(struct spi_device *spi) err_remove_attr_group:sysfs_remove_group (&dev->kobj, &ads784x_attr_group); - err_remove_hwmon: -ads784x_hwmon_unregister (spi, ts); - err_free_irq: -free_irq (spi->irq, ts); - err_disable_regulator: -regulator_disable (ts->reg); - err_put_regulator: -regulator_put (ts->reg); - err_free_gpio: -if (!ts->get_pendown_state) -gpio_free (ts->gpio_pendown); - err_free_mem: -input_free_device (input_dev); -kfree (packet); -kfree (ts); +return err; }
@@ -1482,26 +1468,7 @@ static int ads7846_remove(struct spi_device *spi)struct ads7846 *ts =spi_get_drvdata (spi);sysfs_remove_group (&spi->dev.kobj, &ads784x_attr_group); - -ads7846_disable (ts); -free_irq (ts->spi->irq, ts); - -input_unregister_device (ts->input); - -ads784x_hwmon_unregister (spi, ts); - -regulator_put (ts->reg); - -if (!ts->get_pendown_state) { -/* -* If we are not using specialized pendown method we must -* have been relying on gpio we set up ourselves. -*/ -gpio_free (ts->gpio_pendown); - } - -kfree (ts->packet); -kfree (ts); +ads7846_stop (ts);dev_dbg (&spi->dev,"unregistered touchscreen\n" );
Signature · 1 line
2.26.2
Re: [PATCH v4 3/3] Input: ads7846: Switch to devm initialization
Quoted 4 lines · Daniel Mack
This simplies the code a lot and fixes some potential resource leaks in the error return paths.
Signed-off-by Daniel Mack <[email protected]>
Quoted 254 lines
--- drivers/input/touchscreen/ads7846.c | 125 ++++++++++------------------ 1 file changed, 46 insertions(+), 79 deletions(-)drivers/input/touchscreen/ads7846.c +46
-79@@ -98,10 +98,6 @@ struct ads7846 {struct spi_device *spi;struct regulator *reg; -#if IS_ENABLED (CONFIG_HWMON ) -struct device *hwmon; -#endif -u16 model;u16 vref_mv;u16 vref_delay_usecs;@@ -513,6 +509,8 @@ __ATTRIBUTE_GROUPS(ads7846_attr);static int ads784x_hwmon_register (struct spi_device *spi,struct ads7846 *ts) { +struct device *hwmon; +/* hwmon sensors need a reference voltage */ switch (ts->model) {case 7846 :@@ -533,17 +531,11 @@ static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts) break; } - ts->hwmon =hwmon_device_register_with_groups (&spi->dev, spi->modalias, - ts, ads7846_attr_groups); + hwmon =devm_hwmon_device_register_with_groups (&spi->dev, + spi->modalias, ts, + ads7846_attr_groups); -return PTR_ERR_OR_ZERO (ts->hwmon); -} - -static void ads784x_hwmon_unregister (struct spi_device *spi, -struct ads7846 *ts) -{ -if (ts->hwmon) -hwmon_device_unregister (ts->hwmon); +return PTR_ERR_OR_ZERO (hwmon); }#else @@ -552,11 +544,6 @@ static inline int ads784x_hwmon_register(struct spi_device *spi, {return 0 ; } - -static inline void ads784x_hwmon_unregister (struct spi_device *spi, -struct ads7846 *ts) -{ -}#endif static ssize_t ads7846_pen_down_show(struct device *dev,@@ -949,8 +936,8 @@ static int ads7846_setup_pendown(struct spi_device *spi, ts->get_pendown_state = pdata->get_pendown_state; }else if (gpio_is_valid (pdata->gpio_pendown)) { - err =gpio_request_one (pdata->gpio_pendown,GPIOF_IN , -"ads7846_pendown" ); + err =devm_gpio_request_one (&spi->dev, pdata->gpio_pendown, +GPIOF_IN ,"ads7846_pendown" );if (err) { dev_err(&spi->dev, "failed to request/setup pendown GPIO%d: %d\n",@@ -1266,6 +1253,11 @@ static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev) }#endif +static void ads7846_regulator_disable (void *regulator) +{ +regulator_disable (regulator); +} +static int ads7846_probe (struct spi_device *spi) {const struct ads7846_platform_data *pdata;@@ -1299,13 +1291,17 @@ static int ads7846_probe(struct spi_device *spi)if (err <0 )return err; - ts =kzalloc (sizeof (struct ads7846 ),GFP_KERNEL ); - packet =kzalloc (sizeof (struct ads7846_packet ),GFP_KERNEL ); - input_dev =input_allocate_device (); -if (!ts || !packet || !input_dev) { - err = -ENOMEM ; - goto err_free_mem; - } + ts =devm_kzalloc (dev,sizeof (struct ads7846 ),GFP_KERNEL ); +if (!ts) +return -ENOMEM ; + + packet =devm_kzalloc (dev,sizeof (struct ads7846_packet ),GFP_KERNEL ); +if (!packet) +return -ENOMEM ; + + input_dev =devm_input_allocate_device (dev); +if (!input_dev) +return -ENOMEM ;spi_set_drvdata (spi, ts);@@ -1319,10 +1315,8 @@ static int ads7846_probe(struct spi_device *spi) pdata =dev_get_platdata (dev);if (!pdata) { pdata =ads7846_probe_dt (dev); -if (IS_ERR (pdata)) { - err =PTR_ERR (pdata); - goto err_free_mem; - } +if (IS_ERR (pdata)) +return PTR_ERR (pdata); } ts->model = pdata->model ? :7846 ;@@ -1344,7 +1338,7 @@ static int ads7846_probe(struct spi_device *spi) err =ads7846_setup_pendown (spi, ts, pdata);if (err) - goto err_free_mem; +return err;if (pdata->penirq_recheck_delay_usecs) ts->penirq_recheck_delay_usecs =@@ -1391,41 +1385,47 @@ static int ads7846_probe(struct spi_device *spi)ads7846_setup_spi_msg (ts, pdata); - ts->reg =regulator_get (dev,"vcc" ); + ts->reg =devm_regulator_get (dev,"vcc" );if (IS_ERR (ts->reg)) { err =PTR_ERR (ts->reg);dev_err (dev,"unable to get regulator: %d\n" , err); - goto err_free_gpio; +return err; } err =regulator_enable (ts->reg);if (err) {dev_err (dev,"unable to enable regulator: %d\n" , err); - goto err_put_regulator; +return err; } + err =devm_add_action_or_reset (dev, ads7846_regulator_disable, ts->reg); +if (err) +return err; + irq_flags = pdata->irq_flags ? :IRQF_TRIGGER_FALLING ; irq_flags |=IRQF_ONESHOT ; - err =request_threaded_irq (spi->irq, ads7846_hard_irq, ads7846_irq, - irq_flags, dev->driver->name, ts); + err =devm_request_threaded_irq (dev, spi->irq, + ads7846_hard_irq, ads7846_irq, + irq_flags, dev->driver->name, ts);if (err && !pdata->irq_flags) {dev_info (dev,"trying pin change workaround on irq %d\n" , spi->irq); irq_flags |=IRQF_TRIGGER_RISING ; - err =request_threaded_irq (spi->irq, - ads7846_hard_irq, ads7846_irq, - irq_flags, dev->driver->name, ts); + err =devm_request_threaded_irq (dev, spi->irq, + ads7846_hard_irq, ads7846_irq, + irq_flags, dev->driver->name, + ts); }if (err) {dev_dbg (dev,"irq %d busy?\n" , spi->irq); - goto err_disable_regulator; +return err; } err =ads784x_hwmon_register (spi, ts);if (err) - goto err_free_irq; +return err;dev_info (dev,"touchscreen, irq %d\n" , spi->irq);@@ -1440,7 +1440,7 @@ static int ads7846_probe(struct spi_device *spi) err =sysfs_create_group (&dev->kobj, &ads784x_attr_group);if (err) - goto err_remove_hwmon; +return err; err =input_register_device (input_dev);if (err)@@ -1459,21 +1459,7 @@ static int ads7846_probe(struct spi_device *spi) err_remove_attr_group:sysfs_remove_group (&dev->kobj, &ads784x_attr_group); - err_remove_hwmon: -ads784x_hwmon_unregister (spi, ts); - err_free_irq: -free_irq (spi->irq, ts); - err_disable_regulator: -regulator_disable (ts->reg); - err_put_regulator: -regulator_put (ts->reg); - err_free_gpio: -if (!ts->get_pendown_state) -gpio_free (ts->gpio_pendown); - err_free_mem: -input_free_device (input_dev); -kfree (packet); -kfree (ts); +return err; }@@ -1482,26 +1468,7 @@ static int ads7846_remove(struct spi_device *spi)struct ads7846 *ts =spi_get_drvdata (spi);sysfs_remove_group (&spi->dev.kobj, &ads784x_attr_group); - -ads7846_disable (ts); -free_irq (ts->spi->irq, ts); - -input_unregister_device (ts->input); - -ads784x_hwmon_unregister (spi, ts); - -regulator_put (ts->reg); - -if (!ts->get_pendown_state) { -/* -* If we are not using specialized pendown method we must -* have been relying on gpio we set up ourselves. -*/ -gpio_free (ts->gpio_pendown); - } - -kfree (ts->packet); -kfree (ts); +ads7846_stop (ts);dev_dbg (&spi->dev,"unregistered touchscreen\n" );Signature · 1 line
2.26.2
Signature · 4 lines
Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Re: [PATCH v4 3/3] Input: ads7846: Switch to devm initialization
Hi Dmitry,
Can this series be merged?
Thanks,
Daniel
Quoted 263 lines · Marco Felsch
Quoted 4 lines · Daniel Mack
This simplies the code a lot and fixes some potential resource leaks in the error return paths.
Signed-off-by Daniel Mack <[email protected]>Reviewed-by Marco Felsch <[email protected]>Quoted 254 lines
--- drivers/input/touchscreen/ads7846.c | 125 ++++++++++------------------ 1 file changed, 46 insertions(+), 79 deletions(-)drivers/input/touchscreen/ads7846.c +46
-79@@ -98,10 +98,6 @@ struct ads7846 {struct spi_device *spi;struct regulator *reg; -#if IS_ENABLED (CONFIG_HWMON ) -struct device *hwmon; -#endif -u16 model;u16 vref_mv;u16 vref_delay_usecs;@@ -513,6 +509,8 @@ __ATTRIBUTE_GROUPS(ads7846_attr);static int ads784x_hwmon_register (struct spi_device *spi,struct ads7846 *ts) { +struct device *hwmon; +/* hwmon sensors need a reference voltage */ switch (ts->model) {case 7846 :@@ -533,17 +531,11 @@ static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts) break; } - ts->hwmon =hwmon_device_register_with_groups (&spi->dev, spi->modalias, - ts, ads7846_attr_groups); + hwmon =devm_hwmon_device_register_with_groups (&spi->dev, + spi->modalias, ts, + ads7846_attr_groups); -return PTR_ERR_OR_ZERO (ts->hwmon); -} - -static void ads784x_hwmon_unregister (struct spi_device *spi, -struct ads7846 *ts) -{ -if (ts->hwmon) -hwmon_device_unregister (ts->hwmon); +return PTR_ERR_OR_ZERO (hwmon); }#else @@ -552,11 +544,6 @@ static inline int ads784x_hwmon_register(struct spi_device *spi, {return 0 ; } - -static inline void ads784x_hwmon_unregister (struct spi_device *spi, -struct ads7846 *ts) -{ -}#endif static ssize_t ads7846_pen_down_show(struct device *dev,@@ -949,8 +936,8 @@ static int ads7846_setup_pendown(struct spi_device *spi, ts->get_pendown_state = pdata->get_pendown_state; }else if (gpio_is_valid (pdata->gpio_pendown)) { - err =gpio_request_one (pdata->gpio_pendown,GPIOF_IN , -"ads7846_pendown" ); + err =devm_gpio_request_one (&spi->dev, pdata->gpio_pendown, +GPIOF_IN ,"ads7846_pendown" );if (err) { dev_err(&spi->dev, "failed to request/setup pendown GPIO%d: %d\n",@@ -1266,6 +1253,11 @@ static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev) }#endif +static void ads7846_regulator_disable (void *regulator) +{ +regulator_disable (regulator); +} +static int ads7846_probe (struct spi_device *spi) {const struct ads7846_platform_data *pdata;@@ -1299,13 +1291,17 @@ static int ads7846_probe(struct spi_device *spi)if (err <0 )return err; - ts =kzalloc (sizeof (struct ads7846 ),GFP_KERNEL ); - packet =kzalloc (sizeof (struct ads7846_packet ),GFP_KERNEL ); - input_dev =input_allocate_device (); -if (!ts || !packet || !input_dev) { - err = -ENOMEM ; - goto err_free_mem; - } + ts =devm_kzalloc (dev,sizeof (struct ads7846 ),GFP_KERNEL ); +if (!ts) +return -ENOMEM ; + + packet =devm_kzalloc (dev,sizeof (struct ads7846_packet ),GFP_KERNEL ); +if (!packet) +return -ENOMEM ; + + input_dev =devm_input_allocate_device (dev); +if (!input_dev) +return -ENOMEM ;spi_set_drvdata (spi, ts);@@ -1319,10 +1315,8 @@ static int ads7846_probe(struct spi_device *spi) pdata =dev_get_platdata (dev);if (!pdata) { pdata =ads7846_probe_dt (dev); -if (IS_ERR (pdata)) { - err =PTR_ERR (pdata); - goto err_free_mem; - } +if (IS_ERR (pdata)) +return PTR_ERR (pdata); } ts->model = pdata->model ? :7846 ;@@ -1344,7 +1338,7 @@ static int ads7846_probe(struct spi_device *spi) err =ads7846_setup_pendown (spi, ts, pdata);if (err) - goto err_free_mem; +return err;if (pdata->penirq_recheck_delay_usecs) ts->penirq_recheck_delay_usecs =@@ -1391,41 +1385,47 @@ static int ads7846_probe(struct spi_device *spi)ads7846_setup_spi_msg (ts, pdata); - ts->reg =regulator_get (dev,"vcc" ); + ts->reg =devm_regulator_get (dev,"vcc" );if (IS_ERR (ts->reg)) { err =PTR_ERR (ts->reg);dev_err (dev,"unable to get regulator: %d\n" , err); - goto err_free_gpio; +return err; } err =regulator_enable (ts->reg);if (err) {dev_err (dev,"unable to enable regulator: %d\n" , err); - goto err_put_regulator; +return err; } + err =devm_add_action_or_reset (dev, ads7846_regulator_disable, ts->reg); +if (err) +return err; + irq_flags = pdata->irq_flags ? :IRQF_TRIGGER_FALLING ; irq_flags |=IRQF_ONESHOT ; - err =request_threaded_irq (spi->irq, ads7846_hard_irq, ads7846_irq, - irq_flags, dev->driver->name, ts); + err =devm_request_threaded_irq (dev, spi->irq, + ads7846_hard_irq, ads7846_irq, + irq_flags, dev->driver->name, ts);if (err && !pdata->irq_flags) {dev_info (dev,"trying pin change workaround on irq %d\n" , spi->irq); irq_flags |=IRQF_TRIGGER_RISING ; - err =request_threaded_irq (spi->irq, - ads7846_hard_irq, ads7846_irq, - irq_flags, dev->driver->name, ts); + err =devm_request_threaded_irq (dev, spi->irq, + ads7846_hard_irq, ads7846_irq, + irq_flags, dev->driver->name, + ts); }if (err) {dev_dbg (dev,"irq %d busy?\n" , spi->irq); - goto err_disable_regulator; +return err; } err =ads784x_hwmon_register (spi, ts);if (err) - goto err_free_irq; +return err;dev_info (dev,"touchscreen, irq %d\n" , spi->irq);@@ -1440,7 +1440,7 @@ static int ads7846_probe(struct spi_device *spi) err =sysfs_create_group (&dev->kobj, &ads784x_attr_group);if (err) - goto err_remove_hwmon; +return err; err =input_register_device (input_dev);if (err)@@ -1459,21 +1459,7 @@ static int ads7846_probe(struct spi_device *spi) err_remove_attr_group:sysfs_remove_group (&dev->kobj, &ads784x_attr_group); - err_remove_hwmon: -ads784x_hwmon_unregister (spi, ts); - err_free_irq: -free_irq (spi->irq, ts); - err_disable_regulator: -regulator_disable (ts->reg); - err_put_regulator: -regulator_put (ts->reg); - err_free_gpio: -if (!ts->get_pendown_state) -gpio_free (ts->gpio_pendown); - err_free_mem: -input_free_device (input_dev); -kfree (packet); -kfree (ts); +return err; }@@ -1482,26 +1468,7 @@ static int ads7846_remove(struct spi_device *spi)struct ads7846 *ts =spi_get_drvdata (spi);sysfs_remove_group (&spi->dev.kobj, &ads784x_attr_group); - -ads7846_disable (ts); -free_irq (ts->spi->irq, ts); - -input_unregister_device (ts->input); - -ads784x_hwmon_unregister (spi, ts); - -regulator_put (ts->reg); - -if (!ts->get_pendown_state) { -/* -* If we are not using specialized pendown method we must -* have been relying on gpio we set up ourselves. -*/ -gpio_free (ts->gpio_pendown); - } - -kfree (ts->packet); -kfree (ts); +ads7846_stop (ts);dev_dbg (&spi->dev,"unregistered touchscreen\n" );Signature · 1 line
2.26.2
Hi,
This series never got merged, but it still applies cleanly on top v5.8.
Should I resend it once more?
Thanks,
Daniel
Quoted 26 lines · Daniel Mack
Hi,
This is v4 of the patches to bring devm initialization to the ads7846 driver. I left the gpiod conversion patch out for now as it needs more work, and it's also independent of the other changes.
v3:
* Added a patch to remove custom filter handling from pdata
* Addeddevm_add_action_or_reset()for regulator state maintaining
* Addressed minor nits pointed out by Marco Felschv4:
* Call
ads7846_stop()rather thanads7846_disable()in the unbind path to avoid regulator refcount confusion, Thanks to Marco Felsch.Daniel Mack (3):
Input: ads7846: Add short-hand forspi->devinprobe()function
Input: ads7846: Remove custom filter handling functions from pdata
Input: ads7846: Switch to devm initializationdrivers/input/touchscreen/ads7846.c | 187 +++++++++++----------------- include/linux/spi/ads7846.h | 15 --- 2 files changed, 73 insertions(+), 129 deletions(-)