x86: lay groundwork for Xen domain 0 support
PATCH 1/1 x86: lay groundwork for Xen domain 0 support
Hi Ingo,
This series begins to lay the groundwork for Xen domain 0 support. Domain 0 is much like a normal Xen domain, but it is also allowed to have direct access to the underlying hardware (including both IO space and various BIOS tables), so it can run device drivers, etc. This means that we need to be able to distinguish between a Xen domain's normal pseudo-physical address space, and the real machine physical address space.
This series:
- Adds a new pte flag - _PAGE_IOMAP - used to indicate that a mapping is intended to map an IO device, and the physical address is actually a real machine physical address rather than a pseudo-physical address. This is exposed as PAGE_KERNEL_IO and so on. ioremap() and early_ioremap() are modified to set this flag, as they (should) always be used to map IO devices and not other memory. By default __supported_pte_mask masks this flag out, so it won't end up in the final pagetable. The Xen (and any other) code which cares about this flag unmask it from __supported_pte_mask.
- Add early_memremap() to deal with the cases where early_ioremap() actually being used to map normal memory.
- Remove a bogus check in x86-64's implementation of set_pte_vaddr_pud(), which prevents memory mappings from being updated.
- Convert __acpi_map_table to use early_ioremap(), rather than have its own implementation.
- Make __acpi_map_table always map the memory rather than assuming that the linear map maps some of the acpi tables. This won't be true in the virtual case, and always mapping doesn't hurt in the native case.
I've tested these patches on both 32 and 64 native booting, and it all works for me.
Thanks,
J
PATCH 1/1 x86: add _PAGE_IOMAP pte flag for IO mappings
Use one of the software-defined PTE bits to indicate that a mapping is intended for an IO address. On native hardware this is irrelevent, since a physical address is a physical address. But in a virtual environment, physical addresses are also virtualized, so there needs to be some way to distinguish between pseudo-physical addresses and actual hardware addresses; _PAGE_IOMAP indicates this intent.
By default, __supported_pte_mask masks out _PAGE_IOMAP, so it doesn't even appear in the final pagetable.
--- arch/x86/mm/init_32.c | 2 +- arch/x86/mm/init_64.c | 2 +- arch/x86/mm/ioremap.c | 8 ++++---- include/asm-x86/fixmap.h | 2 +- include/asm-x86/pgtable.h | 14 ++++++++++++-- 5 files changed, 19 insertions(+), 9 deletions(-)
arch/x86/mm/init_32.c +1 -1
@@ -503,7 +503,7 @@int nx_enabled; -pteval_t __supported_pte_mask__read_mostly = ~(_PAGE_NX | _PAGE_GLOBAL); +pteval_t __supported_pte_mask__read_mostly = ~(_PAGE_NX | _PAGE_GLOBAL | _PAGE_IOMAP);EXPORT_SYMBOL_GPL (__supported_pte_mask);#ifdef CONFIG_X86_PAE
arch/x86/mm/init_64.c +1 -1
@@ -88,7 +88,7 @@int after_bootmem; -unsigned long __supported_pte_mask__read_mostly = ~0UL ; +pteval_t __supported_pte_mask__read_mostly = ~_PAGE_IOMAP;EXPORT_SYMBOL_GPL (__supported_pte_mask);static int do_not_nx__cpuinitdata ;
arch/x86/mm/ioremap.c +4 -4
@@ -223,16 +223,16 @@switch (prot_val) {case _PAGE_CACHE_UC:default : - prot =PAGE_KERNEL_NOCACHE ; + prot =PAGE_KERNEL_IO_NOCACHE ;break ;case _PAGE_CACHE_UC_MINUS: - prot =PAGE_KERNEL_UC_MINUS ; + prot =PAGE_KERNEL_IO_UC_MINUS ;break ;case _PAGE_CACHE_WC: - prot =PAGE_KERNEL_WC ; + prot =PAGE_KERNEL_IO_WC ;break ;case _PAGE_CACHE_WB: - prot =PAGE_KERNEL ; + prot =PAGE_KERNEL_IO ;break ; }
include/asm-x86/pgtable.h +12 -2
@@ -15,7 +15,7 @@#define _PAGE_BIT_PAT 7/* on 4KB pages */ #define _PAGE_BIT_GLOBAL 8/* Global TLB entry PPro+ */ #define _PAGE_BIT_UNUSED1 9/* available for programmer */ -#define _PAGE_BIT_UNUSED2 10 +#define _PAGE_BIT_IOMAP 10/* flag used to indicate IO mapping */ #define _PAGE_BIT_HIDDEN 11/* hidden by kmemcheck */ #define _PAGE_BIT_PAT_LARGE 12/* On 2MB or 1GB pages */ #define _PAGE_BIT_SPECIAL _PAGE_BIT_UNUSED1
@@ -32,7 +32,7 @@#define _PAGE_PSE (_AT(pteval_t, 1) << _PAGE_BIT_PSE)#define _PAGE_GLOBAL (_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL)#define _PAGE_UNUSED1 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1) -#define _PAGE_UNUSED2 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED2) +#define _PAGE_IOMAP (_AT(pteval_t, 1) << _PAGE_BIT_IOMAP)#define _PAGE_HIDDEN (_AT(pteval_t, 1) << _PAGE_BIT_HIDDEN)#define _PAGE_PAT (_AT(pteval_t, 1) << _PAGE_BIT_PAT)#define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE)
@@ -99,6 +99,11 @@#define __PAGE_KERNEL_LARGE_NOCACHE (__PAGE_KERNEL | _PAGE_CACHE_UC | _PAGE_PSE)#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE) +#define __PAGE_KERNEL_IO (__PAGE_KERNEL | _PAGE_IOMAP) +#define __PAGE_KERNEL_IO_NOCACHE (__PAGE_KERNEL_NOCACHE | _PAGE_IOMAP) +#define __PAGE_KERNEL_IO_UC_MINUS (__PAGE_KERNEL_UC_MINUS | _PAGE_IOMAP) +#define __PAGE_KERNEL_IO_WC (__PAGE_KERNEL_WC | _PAGE_IOMAP) +#define PAGE_KERNEL __pgprot(__PAGE_KERNEL)#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO)#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC)
@@ -112,6 +117,11 @@#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC)#define PAGE_KERNEL_VSYSCALL __pgprot(__PAGE_KERNEL_VSYSCALL)#define PAGE_KERNEL_VSYSCALL_NOCACHE __pgprot(__PAGE_KERNEL_VSYSCALL_NOCACHE) + +#define PAGE_KERNEL_IO __pgprot(__PAGE_KERNEL_IO) +#define PAGE_KERNEL_IO_NOCACHE __pgprot(__PAGE_KERNEL_IO_NOCACHE) +#define PAGE_KERNEL_IO_UC_MINUS __pgprot(__PAGE_KERNEL_IO_UC_MINUS) +#define PAGE_KERNEL_IO_WC __pgprot(__PAGE_KERNEL_IO_WC)/* xwr */ #define __P000 PAGE_NONE
Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings
Quoted 10 lines · Jeremy Fitzhardinge
Use one of the software-defined PTE bits to indicate that a mapping is intended for an IO address. On native hardware this is irrelevent, since a physical address is a physical address. But in a virtual environment, physical addresses are also virtualized, so there needs to be some way to distinguish between pseudo-physical addresses and actual hardware addresses;
_PAGE_IOMAPindicates this intent.By default,
__supported_pte_maskmasks out_PAGE_IOMAP, so it doesn't even appear in the final pagetable.
Could PTE_SPECIAL, added for get_user_pages_really_fast(), be reused for this?
Signature · 1 line
error compiling committee.c: too many arguments to function
Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings
Quoted 8 lines · Avi Kivity
Quoted 7 lines · Jeremy Fitzhardinge
Use one of the software-defined PTE bits to indicate that a mapping is intended for an IO address. On native hardware this is irrelevent, since a physical address is a physical address. But in a virtual environment, physical addresses are also virtualized, so there needs to be some way to distinguish between pseudo-physical addresses and actual hardware addresses;
_PAGE_IOMAPindicates this intent.
Quoted 7 lines
Quoted 3 lines
By default,
__supported_pte_maskmasks out_PAGE_IOMAP, so it doesn't even appear in the final pagetable.Could
PTE_SPECIAL, added forget_user_pages_really_fast(), be reused for this?
I'm not sure; I still don't really understand how _PAGE_SPECIAL gets used, other than being user-mode mapping only. But in principle, _PAGE_IOMAP could be set on both kernel and user mappings (if you direct map a device into a process address space), so I think they would conflict then?
Also, _PAGE_SPECIAL is also shared with _PAGE_CPA_TEST, which is only used on kernel mappings, so they can co-exist happily.
Is _PAGE_IOMAP at all useful for device passthrough in kvm?
J
Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings
Quoted 20 lines · Jeremy Fitzhardinge
Quoted 9 lines · Avi Kivity
Quoted 7 lines · Jeremy Fitzhardinge
Use one of the software-defined PTE bits to indicate that a mapping is intended for an IO address. On native hardware this is irrelevent, since a physical address is a physical address. But in a virtual environment, physical addresses are also virtualized, so there needs to be some way to distinguish between pseudo-physical addresses and actual hardware addresses;
_PAGE_IOMAPindicates this intent.Quoted 8 lines
Quoted 4 lines
By default,
__supported_pte_maskmasks out_PAGE_IOMAP, so it doesn't even appear in the final pagetable.Could
PTE_SPECIAL, added forget_user_pages_really_fast(), be reused for this?
Quoted 7 lines
I'm not sure; I still don't really understand how
_PAGE_SPECIALgets used, other than being user-mode mapping only. But in principle,_PAGE_IOMAPcould be set on both kernel and user mappings (if you direct map a device into a process address space), so I think they would conflict then?
It's a "don't refcount me" flag, which is not sematically the same as I/O, but may be close enough.
Quoted 2 lines
Is
_PAGE_IOMAPat all useful for device passthrough in kvm?
No. We don't care if a page is an I/O page or RAM (other than refcounting correctness and page attributes, which are handled by other means).
Signature · 1 line
error compiling committee.c: too many arguments to function
Re: [Xen-devel] Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings
Quoted 8 lines · Avi Kivity
Quoted 5 lines
I'm not sure; I still don't really understand how
_PAGE_SPECIALgets used, other than being user-mode mapping only. But in principle,_PAGE_IOMAPcould be set on both kernel and user mappings (if you direct map a device into a process address space), so I think they would conflict then?It's a "don't refcount me" flag, which is not sematically the same as I/O, but may be close enough.
That's basically what our _PAGE_IO flag (in our old Linux patchset) means. We use it to cause pte_pfn() to return an invalid pfn and hence avoid reference counting that way. Since kernel mappings are never reference counted (I think?) perhaps we could use _PAGE_SPECIAL even if it is restricted to use on user mappings.
-- Keir
Re: [Xen-devel] Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings
Quoted 5 lines · Keir Fraser
That's basically what our
_PAGE_IOflag (in our old Linux patchset) means. We use it to causepte_pfn()to return an invalid pfn and hence avoid reference counting that way. Since kernel mappings are never reference counted (I think?) perhaps we could use_PAGE_SPECIALeven if it is restricted to use on user mappings.
Well, _PAGE_IOMAP's most important semantic from Xen's perspective is that the frame number is considered to already be an MFN and so isn't converted. It may be that _PAGE_SPECIAL is also useful for its "no refcount" properties, but we could set both in that case.
At present we can't set _PAGE_SPECIAL on kernel mappings because we assume its usermode only, and its shared with _PAGE_CPA_TEST which is kernel-only. Most _PAGE_IOMAP mappings are in kernel space, but I wouldn't discount user mappings if we end up allowing direct access to passthrough devices.
J
Re: [Xen-devel] Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings
Quoted 11 lines · Jeremy Fitzhardinge
Quoted 5 lines · Keir Fraser
That's basically what our
_PAGE_IOflag (in our old Linux patchset) means. We use it to causepte_pfn()to return an invalid pfn and hence avoid reference counting that way. Since kernel mappings are never reference counted (I think?) perhaps we could use_PAGE_SPECIALeven if it is restricted to use on user mappings.Well, _PAGE_IOMAP's most important semantic from Xen's perspective is that the frame number is considered to already be an MFN and so isn't converted. It may be that
_PAGE_SPECIALis also useful for its "no refcount" properties, but we could set both in that case.
Oh, yes, our _PAGE_IO has the same meaning.
-- Keir
Re: [Xen-devel] Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings
In reply to Avi KivityQuoted 10 lines · Avi Kivity
Quoted 8 lines
I'm not sure; I still don't really understand how
_PAGE_SPECIALgets used, other than being user-mode mapping only. But in principle,_PAGE_IOMAPcould be set on both kernel and user mappings (if you direct map a device into a process address space), so I think they would conflict then?It's a "don't refcount me" flag, which is not sematically the same as I/O, but may be close enough.
Actually it's more of a "no struct page" flag, which implies no refcounting. And not having a struct page should correspond well to a pte not requiring pfn->mfn conversion and being an I/O page.
Signature · 1 line
error compiling committee.c: too many arguments to function
Re: [Xen-devel] Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings
Quoted 2 lines · Avi Kivity
Actually it's more of a "no struct page" flag, which implies no refcounting.
Hm, is that actually true enough to define it? Could we rename it something like _PAGE_NOSTRUCTPAGE or something a bit more specific than "special"?
Quoted 2 lines
And not having a struct page should correspond well to a pte not
requiringpfn->mfnconversion and being an I/O page.
But _PAGE_SPECIAL is only set in a few places. It's not set in ioremap mappings and so on. Should it be?
There's also the hiccup that it gets set in a pte with pte_mkspecial() - but at that point its too late because you've already constructed the pte and done the pfn->mfn conversion. _PAGE_IOMAP can only be set when you initially construct the pte out of a frame number and a pgprot.
J
Re: [Xen-devel] Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings
Quoted 7 lines · Jeremy Fitzhardinge
Quoted 2 lines · Avi Kivity
Actually it's more of a "no struct page" flag, which implies no refcounting.
Hm, is that actually true enough to define it? Could we rename it something like
_PAGE_NOSTRUCTPAGEor something a bit more specific than "special"?
It complements vm_normal_page, which was there first (and coined by Linus). It is the opposite of normal. This question always comes up and my answer is always yes, if you can convince Linus to rename vm_normal_page to the corresponding term :)
It's not exactly _PAGE_NOSTRUCTPAGE. There can be struct pages under there, but you're not to touch them.
Quoted 5 lines
Quoted 2 lines
And not having a struct page should correspond well to a pte not
requiringpfn->mfnconversion and being an I/O page.But
_PAGE_SPECIALis only set in a few places. It's not set in ioremap mappings and so on. Should it be?
Kernel address space, you mean? No, it is only ever used on user addresses.
Quoted 4 lines
There's also the hiccup that it gets set in a pte with
pte_mkspecial()- but at that point its too late because you've already constructed the pte and done thepfn->mfnconversion._PAGE_IOMAPcan only be set when you initially construct the pte out of a frame number and a pgprot.
I don't see this would be any problem because the pte is always constructed in a single line in both places where it is used.
Re: [Xen-devel] Re: [PATCH 1 of 7] x86: add _PAGE_IOMAP pte flag for IO mappings
Quoted 5 lines · Nick Piggin
It complements
vm_normal_page, which was there first (and coined by Linus). It is the opposite of normal. This question always comes up and my answer is always yes, if you can convince Linus to renamevm_normal_pageto the corresponding term :)
Not really. Normal is normal, but "special" doesn't tell us what kind of special it is.
Quoted 3 lines
It's not exactly
_PAGE_NOSTRUCTPAGE. There can be struct pages under there, but you're not to touch them.
To the extent that the struct page may as well not exist? Does it contain any meaningful state? Are they always IO mappings? Could we just use _PAGE_IOMAP as the name for _PAGE_SPECIAL?
Quoted 10 lines
Quoted 6 lines
Quoted 3 lines
And not having a struct page should correspond well to a pte not
requiringpfn->mfnconversion and being an I/O page.But
_PAGE_SPECIALis only set in a few places. It's not set in ioremap mappings and so on. Should it be?Kernel address space, you mean? No, it is only ever used on user addresses.
Right. But if we fold _PAGE_SPECIAL and _PAGE_IOMAP together, it would start getting used on kernel addresses (and obviously we'd need to rearrange _PAGE_CPA_TEST).
Quoted 9 lines
Quoted 5 lines
There's also the hiccup that it gets set in a pte with
pte_mkspecial()- but at that point its too late because you've already constructed the pte and done thepfn->mfnconversion._PAGE_IOMAPcan only be set when you initially construct the pte out of a frame number and a pgprot.I don't see this would be any problem because the pte is always constructed in a single line in both places where it is used.
OK. If we were to fold these two together, then pte_mkspecial() would have to go, since it wouldn't possible to use correctly in my use case.
J
PATCH 1/1 x86: remove duplicate early_ioremap declarations
In reply to Jeremy Fitzhardingeearly_ioremap() is redeclared in several places; remove them.
--- include/asm-x86/io.h | 14 -------------- include/asm-x86/io_64.h | 3 --- 2 files changed, 17 deletions(-)
include/asm-x86/io.h +0 -14
@@ -4,20 +4,6 @@#define ARCH_HAS_IOREMAP_WC #include <linux/compiler.h> - -/* -* early_ioremap() and early_iounmap() are for temporary early boot-time -* mappings, before the real ioremap() is functional. -* A boot-time mapping is currently limited to at most 16 pages. -*/ -#ifndef __ASSEMBLY__ -extern void early_ioremap_init (void ); -extern void early_ioremap_clear (void ); -extern void early_ioremap_reset (void ); -extern void *early_ioremap (unsigned long offset,unsigned long size); -extern void early_iounmap (void *addr,unsigned long size); -extern void __iomem *fix_ioremap (unsigned idx,unsigned long phys); -#endif #define build_mmio_read (name, size, type, reg, barrier) \ static inline type name(const volatile void __iomem *addr) \
include/asm-x86/io_64.h +0 -3
@@ -165,9 +165,6 @@#include <asm-generic/iomap.h> -extern void *early_ioremap (unsigned long addr,unsigned long size); -extern void early_iounmap (void *addr,unsigned long size); -/* * This one maps high address device memory and turns off caching for that area. * it's useful if some control registers are in such an area and write combining
PATCH 1/1 x86: add early_memremap()
In reply to Jeremy Fitzhardingeearly_ioremap() is also used to map normal memory when constructing the linear memory mapping. However, since we sometimes need to be able to distinguish between actual IO mappings and normal memory mappings, add a early_memremap() call, which maps with PAGE_KERNEL (as opposed to PAGE_KERNEL_IO for early_ioremap()), and use it when constructing pagetables.
--- arch/x86/mm/init_64.c | 2 +- arch/x86/mm/ioremap.c | 22 +++++++++++++++++----- include/asm-x86/io.h | 1 + 3 files changed, 19 insertions(+), 6 deletions(-)
arch/x86/mm/init_64.c +1 -1
@@ -312,7 +312,7 @@if (pfn >= table_top)panic ("alloc_low_page: ran out of memory" ); - adr =early_ioremap (pfn *PAGE_SIZE ,PAGE_SIZE ); + adr =early_memremap (pfn *PAGE_SIZE ,PAGE_SIZE );memset (adr,0 ,PAGE_SIZE ); *phys = pfn *PAGE_SIZE ;return adr;
arch/x86/mm/ioremap.c +17 -5
@@ -549,12 +549,12 @@ }static inline void __init early_set_fixmap (enum fixed_addresses idx, -unsigned long phys) +unsigned long phys,pgprot_t prot) {if (after_paging_init) -set_fixmap (idx, phys); +__set_fixmap (idx, phys, prot);else -__early_set_fixmap (idx, phys,PAGE_KERNEL ); +__early_set_fixmap (idx, phys, prot); }static inline void __init early_clear_fixmap (enum fixed_addresses idx)
@@ -582,7 +582,7 @@ }late_initcall (check_early_ioremap_leak); -void __init *early_ioremap (unsigned long phys_addr,unsigned long size) +static void __init *__early_ioremap (unsigned long phys_addr,unsigned long size,pgprot_t prot) {unsigned long offset, last_addr;unsigned int nrpages, nesting;
@@ -631,7 +631,7 @@ idx0 =FIX_BTMAP_BEGIN -NR_FIX_BTMAPS *nesting; idx = idx0;while (nrpages >0 ) { -early_set_fixmap (idx, phys_addr); +early_set_fixmap (idx, phys_addr, prot); phys_addr +=PAGE_SIZE ; --idx; --nrpages;
@@ -640,6 +640,18 @@printk (KERN_CONT "%08lx + %08lx\n" , offset,fix_to_virt (idx0));return (void *) (offset +fix_to_virt (idx0)); +} + +/* Remap an IO device */ +void __init *early_ioremap (unsigned long phys_addr,unsigned long size) +{ +return __early_ioremap (phys_addr, size,PAGE_KERNEL_IO ); +} + +/* Remap memory */ +void __init *early_memremap (unsigned long phys_addr,unsigned long size) +{ +return __early_ioremap (phys_addr, size,PAGE_KERNEL ); }void __init early_iounmap (void *addr,unsigned long size)
include/asm-x86/io.h +1 -0
@@ -83,6 +83,7 @@extern void early_ioremap_clear (void );extern void early_ioremap_reset (void );extern void *early_ioremap (unsigned long offset,unsigned long size); +extern void *early_memremap (unsigned long offset,unsigned long size);extern void early_iounmap (void *addr,unsigned long size);extern void __iomem *fix_ioremap (unsigned idx,unsigned long phys);
PATCH 1/1 x86: use early_memremap() in setup.c
In reply to Jeremy FitzhardingeThe remappings in setup.c are all just ordinary memory, so use early_memremap() rather than early_ioremap().
--- arch/x86/kernel/setup.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
arch/x86/kernel/setup.c +4 -4
@@ -302,7 +302,7 @@if (clen >MAX_MAP_CHUNK -slop) clen =MAX_MAP_CHUNK -slop; mapaddr = ramdisk_image &PAGE_MASK ; - p =early_ioremap (mapaddr, clen+slop); + p =early_memremap (mapaddr, clen+slop);memcpy (q, p+slop, clen);early_iounmap (p, clen+slop); q += clen;
@@ -379,7 +379,7 @@return ; pa_data = boot_params.hdr.setup_data;while (pa_data) { - data =early_ioremap (pa_data,PAGE_SIZE ); + data =early_memremap (pa_data,PAGE_SIZE );switch (data->type) {case SETUP_E820_EXT :parse_e820_ext (data, pa_data);
@@ -402,7 +402,7 @@return ; pa_data = boot_params.hdr.setup_data;while (pa_data) { - data =early_ioremap (pa_data,sizeof (*data)); + data =early_memremap (pa_data,sizeof (*data));e820_update_range (pa_data,sizeof (*data)+data->len,E820_RAM ,E820_RESERVED_KERN ); found =1 ;
@@ -428,7 +428,7 @@return ; pa_data = boot_params.hdr.setup_data;while (pa_data) { - data =early_ioremap (pa_data,sizeof (*data)); + data =early_memremap (pa_data,sizeof (*data));sprintf (buf,"setup data %x" , data->type);reserve_early (pa_data, pa_data+sizeof (*data)+data->len, buf); pa_data = data->next;
PATCH 1/1 x86-64: don't check for map replacement
In reply to Jeremy FitzhardingeThe check prevents flags on mappings from being changed, which is not desireable. There's no need to check for replacing a mapping, and x86-32 does not do this check.
--- arch/x86/mm/init_64.c | 3 --- 1 file changed, 3 deletions(-)
arch/x86/mm/init_64.c +0 -3
@@ -195,9 +195,6 @@ } pte =pte_offset_kernel (pmd, vaddr); -if (!pte_none (*pte) &&pte_val (new_pte) && -pte_val (*pte) != (pte_val (new_pte) & __supported_pte_mask)) -pte_ERROR (*pte);set_pte (pte, new_pte);/*
PATCH 1/1 x86: use early_ioremap in __acpi_map_table
In reply to Jeremy Fitzhardinge__acpi_map_table() effectively reimplements early_ioremap(). Rather than have that duplication, just implement it in terms of early_ioremap().
However, unlike early_ioremap(), __acpi_map_table() just maintains a single mapping which gets replaced each call, and has no corresponding unmap function. Implement this by just removing the previous mapping each time its called. Unfortunately, this will leave a stray mapping at the end.
--- arch/x86/kernel/acpi/boot.c | 27 +++++++-------------------- include/asm-x86/acpi.h | 3 --- include/asm-x86/fixmap_32.h | 4 ---- include/asm-x86/fixmap_64.h | 4 ---- 4 files changed, 7 insertions(+), 31 deletions(-)
arch/x86/kernel/acpi/boot.c +7 -20
@@ -121,8 +121,8 @@*/ char *__init __acpi_map_table (unsigned long phys,unsigned long size) { -unsigned long base, offset, mapped_size; -int idx; +static char *prev_map; +static unsigned long prev_size;if (!phys || !size)return NULL ;
@@ -130,26 +130,13 @@if (phys+size <= (max_low_pfn_mapped <<PAGE_SHIFT ))return __va (phys); - offset = phys & (PAGE_SIZE -1 ); - mapped_size =PAGE_SIZE - offset; -clear_fixmap (FIX_ACPI_END ); -set_fixmap (FIX_ACPI_END , phys); - base =fix_to_virt (FIX_ACPI_END ); +if (prev_map) +early_iounmap (prev_map, prev_size); -/* -* Most cases can be covered by the below. -*/ - idx =FIX_ACPI_END ; -while (mapped_size < size) { -if (--idx <FIX_ACPI_BEGIN ) -return NULL ;/* cannot handle this */ - phys +=PAGE_SIZE ; -clear_fixmap (idx); -set_fixmap (idx, phys); - mapped_size +=PAGE_SIZE ; - } + prev_size = size; + prev_map =early_ioremap (phys, size); -return ((unsigned char *)base + offset); +return prev_map; }#ifdef CONFIG_PCI_MMCONFIG
include/asm-x86/acpi.h +0 -3
@@ -102,9 +102,6 @@ acpi_noirq =1 ; } -/* Fixmap pages to reserve for ACPI boot-time tables (see fixmap.h) */ -#define FIX_ACPI_PAGES 4 -extern int acpi_gsi_to_irq (u32 gsi,unsigned int *irq);static inline void acpi_noirq_set (void ) { acpi_noirq =1 ; }
include/asm-x86/fixmap_32.h +0 -4
@@ -99,10 +99,6 @@ (__end_of_permanent_fixed_addresses &255 ),FIX_BTMAP_BEGIN =FIX_BTMAP_END +NR_FIX_BTMAPS *FIX_BTMAPS_NESTING -1 ,FIX_WP_TEST , -#ifdef CONFIG_ACPI -FIX_ACPI_BEGIN , -FIX_ACPI_END =FIX_ACPI_BEGIN +FIX_ACPI_PAGES -1 , -#endif #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT FIX_OHCI1394_BASE, #endif
include/asm-x86/fixmap_64.h +0 -4
@@ -50,10 +50,6 @@ FIX_PARAVIRT_BOOTMAP, #endif __end_of_permanent_fixed_addresses, -#ifdef CONFIG_ACPI - FIX_ACPI_BEGIN, - FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1, -#endif #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT FIX_OHCI1394_BASE,#endif
Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table
Quoted 9 lines · Jeremy Fitzhardinge
__acpi_map_table()effectively reimplementsearly_ioremap(). Rather than have that duplication, just implement it in terms ofearly_ioremap().However, unlike
early_ioremap(),__acpi_map_table()just maintains a single mapping which gets replaced each call, and has no corresponding unmap function. Implement this by just removing the previous mapping each time its called. Unfortunately, this will leave a stray mapping at the end.
It would be better to just fix the ACPI code to unmap.
-Andi
Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table
Quoted 6 lines · Andi Kleen
Quoted 4 lines · Jeremy Fitzhardinge
__acpi_map_table()effectively reimplementsearly_ioremap(). Rather than have that duplication, just implement it in terms ofearly_ioremap().
Quoted 8 lines
Quoted 6 lines
However, unlike
early_ioremap(),__acpi_map_table()just maintains a single mapping which gets replaced each call, and has no corresponding unmap function. Implement this by just removing the previous mapping each time its called. Unfortunately, this will leave a stray mapping at the end.It would be better to just fix the ACPI code to unmap.
I was concerned that would cause lots of cross-arch churn, but of course the only other relevant architecture is ia64. I'll prep a followup patch.
J
Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table
Quoted 11 lines · Jeremy Fitzhardinge
Quoted 7 lines
Quoted 5 lines
However, unlike
early_ioremap(),__acpi_map_table()just maintains a single mapping which gets replaced each call, and has no corresponding unmap function. Implement this by just removing the previous mapping each time its called. Unfortunately, this will leave a stray mapping at the end.It would be better to just fix the ACPI code to unmap.
I was concerned that would cause lots of cross-arch churn, but of course the only other relevant architecture is ia64. I'll prep a followup patch.
uhm, there's a nasty trap in that route: it can potentially cause a lot of breakage.
It's not robust to assume that the ACPI code is sane wrt. mapping/unmapping, because it currently simply doesnt rely on robust unmapping (in the linear range).
I tried it in the past and i found tons of crappy ACPI code all around that just never unmapped tables. Leaking ACPI maps are hard to find as well, and it can occur anytime during bootup.
As a general principle it might be worth fixing those places, and we've hardened up the early-ioremap code for leaks during the PAT rewrite, still please realize that it can become non-trivial and it might cause a lot of unhappy users.
So i'd suggest a different, more carful approach: keep the new code you wrote, but print a WARN()ing if prev_map is not unmapped yet when the next mapping is acquired. That way the ACPI code can be fixed gradually and without breaking existing functionality.
There's another complication: ACPI might rely on multiple mappings being present at once, so unmapping the previous one might not be safe. But it _should_ be fine most of the time as __acpi_map_table() is only used inearly init code - and we fixed most of these things in the PAT patchset in any case.
Ingo
Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table
Quoted 7 lines · Ingo Molnar
uhm, there's a nasty trap in that route: it can potentially cause a lot of breakage.
It's not robust to assume that the ACPI code is sane wrt. mapping/unmapping, because it currently simply doesnt rely on robust unmapping (in the linear range).
You mean there's code which just assumes that it can keep using a linear-mapped acpi even after __acpi_map_table() should have implicitly unmapped it?
Quoted 4 lines
I tried it in the past and i found tons of crappy ACPI code all around that just never unmapped tables. Leaking ACPI maps are hard to find as well, and it can occur anytime during bootup.
__acpi_map_table() is called by acpi_map_table(), which does have a acpi_unmap_table() counterpart. But it only calls iounmap() once we're past the stage of calling early_*(). I could easily make it call __acpi_unmap_table()->early_iounmap(). But if the concern is that the early boot callers of acpi_map_table() "know" that they never need to unmap, then yes, I see the problem.
Quoted 10 lines
As a general principle it might be worth fixing those places, and we've hardened up the early-ioremap code for leaks during the PAT rewrite, still please realize that it can become non-trivial and it might cause a lot of unhappy users.
So i'd suggest a different, more carful approach: keep the new code you wrote, but print a WARN()ing if
prev_mapis not unmapped yet when the next mapping is acquired. That way the ACPI code can be fixed gradually and without breaking existing functionality.
Yep.
Quoted 5 lines
There's another complication: ACPI might rely on multiple mappings being present at once, so unmapping the previous one might not be safe. But it _should_ be fine most of the time as
__acpi_map_table()is only used inearly init code - and we fixed most of these things in the PAT patchset in any case.
And the current behaviour of __acpi_map_table() is to remove the previous mapping (implicitly, by overwriting the same fixmap slots), so its only an issue if the callers assume they can keep using linear-mapped acpi tables after a subsequent call to __acpi_map_table().
J
Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table
In reply to Ingo MolnarQuoted 11 lines · Ingo Molnar
uhm, there's a nasty trap in that route: it can potentially cause a lot of breakage.
It's not robust to assume that the ACPI code is sane wrt. mapping/unmapping, because it currently simply doesnt rely on robust unmapping (in the linear range).
I tried it in the past and i found tons of crappy ACPI code all around that just never unmapped tables. Leaking ACPI maps are hard to find as well, and it can occur anytime during bootup.
Yes, you're right, it's a mess. I put a unmap and warning in there, but there's lots of acpi code which doesn't unmap after using its table. It doesn't seem to intermix using two tables, fortunately, so the "unmap previous" behaviour of __acpi_map_table works OK, at least as far as I can see.
J
Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table
In reply to Ingo MolnarQuoted 5 lines
So i'd suggest a different, more carful approach: keep the new code you wrote, but print a WARN()ing if
prev_mapis not unmapped yet when the next mapping is acquired. That way the ACPI code can be fixed gradually and without breaking existing functionality.
ok, i stuck in your patches into tip/master today and -tip testing quickly found an early-ioremap leak:
[ 36.625100] calling check_early_ioremap_leak+0x0/0x3d [ 36.630253] ------------[ cut here ]------------ [ 36.634884] WARNING: at arch/x86/mm/ioremap.c:577 check_early_ioremap_leak+0x28/0x3d() [ 36.642811] Debug warning: early ioremap leak of 1 areas detected.
find the full log below with ioremap-leak-tracing turned on. I've excluded these commits for now from tip/master.
Ingo
---------------->
[ 0.000000] Linux version 2.6.27-rc6-tip-00189-gafeef79-dirty (mingo@titan) (gcc version 4.2.3) #1 SMP Wed Sep 10 13:53:53 CEST 2008 [ 0.000000] Command line: root=/dev/sda1 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty 5 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled pci=nomsi early_ioremap_debug [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ed94000 (usable) [ 0.000000] BIOS-e820: 000000003ed94000 - 000000003ee4e000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ee4e000 - 000000003fea2000 (usable) [ 0.000000] BIOS-e820: 000000003fea2000 - 000000003fee9000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fee9000 - 000000003feed000 (usable) [ 0.000000] BIOS-e820: 000000003feed000 - 000000003feff000 (ACPI data) [ 0.000000] BIOS-e820: 000000003feff000 - 000000003ff00000 (usable) [ 0.000000] console [earlyser0] enabled [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] last_pfn = 0x3ff00 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 003fe00000 page 2M [ 0.000000] 003fe00000 - 003ff00000 page 4k [ 0.000000] kernel direct mapping tables up to 3ff00000 @ 8000-b000 [ 0.000000] early_ioremap(00008000, 00001000) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff81278194>] early_memremap+0x13/0x15 [ 0.000000] [<ffffffff80bdc019>] alloc_low_page+0x76/0x98 [ 0.000000] [<ffffffff812b394b>] phys_pmd_init+0x171/0x1fa [ 0.000000] [<ffffffff812b3ac9>] phys_pud_init+0xf5/0x1fb [ 0.000000] [<ffffffff80bdc4c6>] init_memory_mapping+0x46d/0x5e5 [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812685b2>] setup_arch+0x450/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000000 + ffffffffff400000 [ 0.000000] early_iounmap(ffffffffff400000, 00001000) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80230c27>] ? update_page_count+0x37/0x3c [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff80bdc057>] unmap_low_page+0x1c/0x1e [ 0.000000] [<ffffffff812b3968>] phys_pmd_init+0x18e/0x1fa [ 0.000000] [<ffffffff812b3ac9>] phys_pud_init+0xf5/0x1fb [ 0.000000] [<ffffffff80bdc4c6>] init_memory_mapping+0x46d/0x5e5 [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812685b2>] setup_arch+0x450/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] last_map_addr: 3ff00000 end: 3ff00000 [ 0.000000] early_ioremap(000f0000, 00010000) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff812a7ba4>] dmi_scan_machine+0x74/0xd9 [ 0.000000] [<ffffffff812686dc>] setup_arch+0x57a/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000000 + ffffffffff400000 [ 0.000000] DMI 2.3 present. [ 0.000000] early_ioremap(000e4d10, 0000061f) [1] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff812a7aec>] dmi_present+0xe3/0x127 [ 0.000000] [<ffffffff812a7bc0>] dmi_scan_machine+0x90/0xd9 [ 0.000000] [<ffffffff812686dc>] setup_arch+0x57a/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000d10 + ffffffffff440000 [ 0.000000] early_iounmap(ffffffffff440d10, 0000061f) [1] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80a0f636>] ? dmi_table+0x56/0x81 [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff812a7b20>] dmi_present+0x117/0x127 [ 0.000000] [<ffffffff812a7bc0>] dmi_scan_machine+0x90/0xd9 [ 0.000000] [<ffffffff812686dc>] setup_arch+0x57a/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_iounmap(ffffffffff400000, 00010000) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff812a7bdb>] dmi_scan_machine+0xab/0xd9 [ 0.000000] [<ffffffff812686dc>] setup_arch+0x57a/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(0000040e, 00000002) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ec343>] acpi_find_root_pointer+0x3f/0x254 [ 0.000000] [<ffffffff8128a953>] acpi_os_get_root_pointer+0x4e/0x54 [ 0.000000] [<ffffffff8128aa15>] acpi_initialize_tables+0x99/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 0000040e + ffffffffff400000 [ 0.000000] early_iounmap(ffffffffff40040e, 00000002) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ec3b8>] acpi_find_root_pointer+0xb4/0x254 [ 0.000000] [<ffffffff8128a953>] acpi_os_get_root_pointer+0x4e/0x54 [ 0.000000] [<ffffffff8128aa15>] acpi_initialize_tables+0x99/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(0009fc00, 00000400) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ec3b8>] acpi_find_root_pointer+0xb4/0x254 [ 0.000000] [<ffffffff8128a953>] acpi_os_get_root_pointer+0x4e/0x54 [ 0.000000] [<ffffffff8128aa15>] acpi_initialize_tables+0x99/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000c00 + ffffffffff400000 [ 0.000000] early_iounmap(ffffffffff400c00, 00000400) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ec46a>] acpi_find_root_pointer+0x166/0x254 [ 0.000000] [<ffffffff8128a953>] acpi_os_get_root_pointer+0x4e/0x54 [ 0.000000] [<ffffffff8128aa15>] acpi_initialize_tables+0x99/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(000e0000, 00020000) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ec46a>] acpi_find_root_pointer+0x166/0x254 [ 0.000000] [<ffffffff8128a953>] acpi_os_get_root_pointer+0x4e/0x54 [ 0.000000] [<ffffffff8128aa15>] acpi_initialize_tables+0x99/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000000 + ffffffffff400000 [ 0.000000] early_iounmap(ffffffffff400000, 00020000) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff8128aabe>] acpi_tb_parse_root_table+0x42/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(000fe020, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff8128aabe>] acpi_tb_parse_root_table+0x42/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000020 + ffffffffff400000 [ 0.000000] ACPI: RSDP 000FE020, 0014 (r0 INTEL ) [ 0.000000] early_iounmap(ffffffffff400020, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff8128abb2>] acpi_tb_parse_root_table+0x136/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefde48, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff8128abb2>] acpi_tb_parse_root_table+0x136/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000e48 + ffffffffff400000 [ 0.000000] ACPI: RSDT 3FEFDE48, 0050 (r1 INTEL D975XBX 4B9 MSFT 1000013) [ 0.000000] early_iounmap(ffffffffff400e48, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff8128ac61>] acpi_tb_parse_root_table+0x1e5/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefde48, 00000050) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff8128ac61>] acpi_tb_parse_root_table+0x1e5/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000e48 + ffffffffff400000 [ 0.000000] early_iounmap(ffffffffff400e48, 00000050) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277e5d>] ? __early_set_fixmap+0xb3/0xbc [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefcf10, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000f10 + ffffffffff400000 [ 0.000000] ACPI: FACP 3FEFCF10, 0074 (r1 INTEL D975XBX 4B9 MSFT 1000013) [ 0.000000] early_iounmap(ffffffffff400f10, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ec15f>] acpi_tb_parse_fadt+0x32/0x9b [ 0.000000] [<ffffffff8128adc2>] acpi_tb_parse_root_table+0x346/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefcf10, 00000074) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ec15f>] acpi_tb_parse_fadt+0x32/0x9b [ 0.000000] [<ffffffff8128adc2>] acpi_tb_parse_root_table+0x346/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000f10 + ffffffffff400000 [ 0.000000] early_iounmap(ffffffffff400f10, 00000074) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277e5d>] ? __early_set_fixmap+0xb3/0xbc [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff805ec1a3>] acpi_tb_parse_fadt+0x76/0x9b [ 0.000000] [<ffffffff8128adc2>] acpi_tb_parse_root_table+0x346/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fef8010, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff805ec1a3>] acpi_tb_parse_fadt+0x76/0x9b [ 0.000000] [<ffffffff8128adc2>] acpi_tb_parse_root_table+0x346/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000010 + ffffffffff400000 [ 0.000000] ACPI: DSDT 3FEF8010, 3E70 (r1 INTEL D975XBX 4B9 MSFT 1000013) [ 0.000000] early_iounmap(ffffffffff400010, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff805ec1bd>] acpi_tb_parse_fadt+0x90/0x9b [ 0.000000] [<ffffffff8128adc2>] acpi_tb_parse_root_table+0x346/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fedfc40, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff805ec1bd>] acpi_tb_parse_fadt+0x90/0x9b [ 0.000000] [<ffffffff8128adc2>] acpi_tb_parse_root_table+0x346/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000c40 + ffffffffff400000 [ 0.000000] ACPI: FACS 3FEDFC40, 0040 [ 0.000000] early_iounmap(ffffffffff400c40, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefce10, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000e10 + ffffffffff400000 [ 0.000000] ACPI: APIC 3FEFCE10, 0078 (r1 INTEL D975XBX 4B9 MSFT 1000013) [ 0.000000] early_iounmap(ffffffffff400e10, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fef7f90, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000f90 + ffffffffff400000 [ 0.000000] ACPI: WDDT 3FEF7F90, 0040 (r1 INTEL D975XBX 4B9 MSFT 1000013) [ 0.000000] early_iounmap(ffffffffff400f90, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fef7f10, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000f10 + ffffffffff400000 [ 0.000000] ACPI: MCFG 3FEF7F10, 003C (r1 INTEL D975XBX 4B9 MSFT 1000013) [ 0.000000] early_iounmap(ffffffffff400f10, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefcd10, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000d10 + ffffffffff400000 [ 0.000000] ACPI: ASF! 3FEFCD10, 00A6 (r32 INTEL D975XBX 4B9 MSFT 1000013) [ 0.000000] early_iounmap(ffffffffff400d10, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fef7e90, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000e90 + ffffffffff400000 [ 0.000000] ACPI: HPET 3FEF7E90, 0038 (r1 INTEL D975XBX 4B9 MSFT 1000013) [ 0.000000] early_iounmap(ffffffffff400e90, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefdc10, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000c10 + ffffffffff400000 [ 0.000000] ACPI: SSDT 3FEFDC10, 01BC (r1 INTEL CpuPm 4B9 MSFT 1000013) [ 0.000000] early_iounmap(ffffffffff400c10, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefda10, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000a10 + ffffffffff400000 [ 0.000000] ACPI: SSDT 3FEFDA10, 01B7 (r1 INTEL Cpu0Ist 4B9 MSFT 1000013) [ 0.000000] early_iounmap(ffffffffff400a10, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefd810, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000810 + ffffffffff400000 [ 0.000000] ACPI: SSDT 3FEFD810, 01B7 (r1 INTEL Cpu1Ist 4B9 MSFT 1000013) [ 0.000000] early_iounmap(ffffffffff400810, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefd610, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000610 + ffffffffff400000 [ 0.000000] ACPI: SSDT 3FEFD610, 01B7 (r1 INTEL Cpu2Ist 4B9 MSFT 1000013) [ 0.000000] early_iounmap(ffffffffff400610, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefd410, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805ebba1>] acpi_tb_install_table+0x53/0xf6 [ 0.000000] [<ffffffff8128ada4>] acpi_tb_parse_root_table+0x328/0x3ae [ 0.000000] [<ffffffff8128aa4f>] acpi_initialize_tables+0xd3/0x100 [ 0.000000] [<ffffffff8128a19e>] acpi_table_init+0x1b/0x7d [ 0.000000] [<ffffffff8126dd7a>] acpi_boot_table_init+0x35/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000410 + ffffffffff400000 [ 0.000000] ACPI: SSDT 3FEFD410, 01B7 (r1 INTEL Cpu3Ist 4B9 MSFT 1000013) [ 0.000000] early_iounmap(ffffffffff400410, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eafd7>] acpi_get_table_header+0x66/0xb5 [ 0.000000] [<ffffffff8128a3d1>] acpi_blacklisted+0x41/0x15c [ 0.000000] [<ffffffff805eabb6>] ? acpi_get_table+0xc/0x98 [ 0.000000] [<ffffffff8126d102>] ? acpi_parse_sbf+0x0/0x2c [ 0.000000] [<ffffffff8126ddc2>] acpi_boot_table_init+0x7d/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fef8010, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eafd7>] acpi_get_table_header+0x66/0xb5 [ 0.000000] [<ffffffff8128a3d1>] acpi_blacklisted+0x41/0x15c [ 0.000000] [<ffffffff805eabb6>] ? acpi_get_table+0xc/0x98 [ 0.000000] [<ffffffff8126d102>] ? acpi_parse_sbf+0x0/0x2c [ 0.000000] [<ffffffff8126ddc2>] acpi_boot_table_init+0x7d/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000010 + ffffffffff400000 [ 0.000000] early_iounmap(ffffffffff400010, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eafd7>] acpi_get_table_header+0x66/0xb5 [ 0.000000] [<ffffffff8128a3d1>] acpi_blacklisted+0x41/0x15c [ 0.000000] [<ffffffff8126d102>] ? acpi_parse_sbf+0x0/0x2c [ 0.000000] [<ffffffff8126ddc2>] acpi_boot_table_init+0x7d/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fef8010, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eafd7>] acpi_get_table_header+0x66/0xb5 [ 0.000000] [<ffffffff8128a3d1>] acpi_blacklisted+0x41/0x15c [ 0.000000] [<ffffffff8126d102>] ? acpi_parse_sbf+0x0/0x2c [ 0.000000] [<ffffffff8126ddc2>] acpi_boot_table_init+0x7d/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000010 + ffffffffff400000 [ 0.000000] early_iounmap(ffffffffff400010, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eafd7>] acpi_get_table_header+0x66/0xb5 [ 0.000000] [<ffffffff8128a3d1>] acpi_blacklisted+0x41/0x15c [ 0.000000] [<ffffffff8126d102>] ? acpi_parse_sbf+0x0/0x2c [ 0.000000] [<ffffffff8126ddc2>] acpi_boot_table_init+0x7d/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fef8010, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eafd7>] acpi_get_table_header+0x66/0xb5 [ 0.000000] [<ffffffff8128a3d1>] acpi_blacklisted+0x41/0x15c [ 0.000000] [<ffffffff8126d102>] ? acpi_parse_sbf+0x0/0x2c [ 0.000000] [<ffffffff8126ddc2>] acpi_boot_table_init+0x7d/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000010 + ffffffffff400000 [ 0.000000] early_iounmap(ffffffffff400010, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eafd7>] acpi_get_table_header+0x66/0xb5 [ 0.000000] [<ffffffff8128a3d1>] acpi_blacklisted+0x41/0x15c [ 0.000000] [<ffffffff8126d102>] ? acpi_parse_sbf+0x0/0x2c [ 0.000000] [<ffffffff8126ddc2>] acpi_boot_table_init+0x7d/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fef8010, 00000024) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eafd7>] acpi_get_table_header+0x66/0xb5 [ 0.000000] [<ffffffff8128a3d1>] acpi_blacklisted+0x41/0x15c [ 0.000000] [<ffffffff8126d102>] ? acpi_parse_sbf+0x0/0x2c [ 0.000000] [<ffffffff8126ddc2>] acpi_boot_table_init+0x7d/0xda [ 0.000000] [<ffffffff812686e6>] setup_arch+0x584/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000010 + ffffffffff400000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000003ff00000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000003ff00000 [ 0.000000] NODE_DATA [0000000000009000 - 000000000003cfff] [ 0.000000] bootmap [000000000003d000 - 0000000000044fdf] pages 8 [ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 003ff00000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0001e6ede0] TEXT DATA BSS ==> [0000200000 - 0001e6ede0] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] found SMP MP-table at [ffff8800000fe680] 000fe680 [ 0.000000] [ffffe20000000000-ffffe200015fffff] PMD -> [ffff880002000000-ffff8800035fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[5] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ed94 [ 0.000000] 0: 0x0003ee4e -> 0x0003fea2 [ 0.000000] 0: 0x0003fee9 -> 0x0003feed [ 0.000000] 0: 0x0003feff -> 0x0003ff00 [ 0.000000] On node 0 totalpages: 261516 [ 0.000000] DMA zone: 3809 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 251978 pages, LIFO batch:31 [ 0.000000] early_iounmap(ffffffffff400010, 00000024) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8126d0b3>] ? acpi_parse_fadt+0x0/0x4f [ 0.000000] [<ffffffff8128a24e>] acpi_table_parse+0x4e/0x68 [ 0.000000] [<ffffffff8126d764>] acpi_boot_init+0x4a/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefcf10, 00000074) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8126d0b3>] ? acpi_parse_fadt+0x0/0x4f [ 0.000000] [<ffffffff8128a24e>] acpi_table_parse+0x4e/0x68 [ 0.000000] [<ffffffff8126d764>] acpi_boot_init+0x4a/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000f10 + ffffffffff400000 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] early_iounmap(ffffffffff400f10, 00000074) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8126d312>] ? acpi_parse_madt+0x0/0x74 [ 0.000000] [<ffffffff8128a24e>] acpi_table_parse+0x4e/0x68 [ 0.000000] [<ffffffff8126d777>] acpi_boot_init+0x5d/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefce10, 00000078) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8126d312>] ? acpi_parse_madt+0x0/0x74 [ 0.000000] [<ffffffff8128a24e>] acpi_table_parse+0x4e/0x68 [ 0.000000] [<ffffffff8126d777>] acpi_boot_init+0x5d/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000e10 + ffffffffff400000 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] early_iounmap(ffffffffff400e10, 00000078) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff8024ba80>] ? printk+0x6c/0x6e [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109 [ 0.000000] [<ffffffff8126ce45>] ? acpi_parse_lapic_addr_ovr+0x0/0x2e [ 0.000000] [<ffffffff8126d37d>] ? acpi_parse_madt+0x6b/0x74 [ 0.000000] [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f [ 0.000000] [<ffffffff8126d7ab>] acpi_boot_init+0x91/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefce10, 00000078) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109 [ 0.000000] [<ffffffff8126ce45>] ? acpi_parse_lapic_addr_ovr+0x0/0x2e [ 0.000000] [<ffffffff8126d37d>] ? acpi_parse_madt+0x6b/0x74 [ 0.000000] [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f [ 0.000000] [<ffffffff8126d7ab>] acpi_boot_init+0x91/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000e10 + ffffffffff400000 [ 0.000000] early_iounmap(ffffffffff400e10, 00000078) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109 [ 0.000000] [<ffffffff8126d284>] ? acpi_parse_sapic+0x0/0x4b [ 0.000000] [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49 [ 0.000000] [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f [ 0.000000] [<ffffffff8126d7da>] acpi_boot_init+0xc0/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefce10, 00000078) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109 [ 0.000000] [<ffffffff8126d284>] ? acpi_parse_sapic+0x0/0x4b [ 0.000000] [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49 [ 0.000000] [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f [ 0.000000] [<ffffffff8126d7da>] acpi_boot_init+0xc0/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000e10 + ffffffffff400000 [ 0.000000] early_iounmap(ffffffffff400e10, 00000078) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109 [ 0.000000] [<ffffffff8126d2cf>] ? acpi_parse_lapic+0x0/0x43 [ 0.000000] [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49 [ 0.000000] [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f [ 0.000000] [<ffffffff8126d7f3>] acpi_boot_init+0xd9/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefce10, 00000078) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109 [ 0.000000] [<ffffffff8126d2cf>] ? acpi_parse_lapic+0x0/0x43 [ 0.000000] [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49 [ 0.000000] [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f [ 0.000000] [<ffffffff8126d7f3>] acpi_boot_init+0xd9/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000e10 + ffffffffff400000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] early_iounmap(ffffffffff400e10, 00000078) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109 [ 0.000000] [<ffffffff8126d23e>] ? acpi_parse_lapic_nmi+0x0/0x46 [ 0.000000] [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49 [ 0.000000] [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f [ 0.000000] [<ffffffff8126d822>] acpi_boot_init+0x108/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefce10, 00000078) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109 [ 0.000000] [<ffffffff8126d23e>] ? acpi_parse_lapic_nmi+0x0/0x46 [ 0.000000] [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49 [ 0.000000] [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f [ 0.000000] [<ffffffff8126d822>] acpi_boot_init+0x108/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000e10 + ffffffffff400000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] early_iounmap(ffffffffff400e10, 00000078) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109 [ 0.000000] [<ffffffff8126db30>] ? acpi_parse_ioapic+0x0/0x41 [ 0.000000] [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49 [ 0.000000] [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f [ 0.000000] [<ffffffff8126d8a1>] acpi_boot_init+0x187/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefce10, 00000078) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109 [ 0.000000] [<ffffffff8126db30>] ? acpi_parse_ioapic+0x0/0x41 [ 0.000000] [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49 [ 0.000000] [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f [ 0.000000] [<ffffffff8126d8a1>] acpi_boot_init+0x187/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000e10 + ffffffffff400000 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] early_iounmap(ffffffffff400e10, 00000078) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109 [ 0.000000] [<ffffffff8126d5b3>] ? acpi_parse_int_src_ovr+0x0/0x9f [ 0.000000] [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49 [ 0.000000] [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f [ 0.000000] [<ffffffff8126d8e7>] acpi_boot_init+0x1cd/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefce10, 00000078) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109 [ 0.000000] [<ffffffff8126d5b3>] ? acpi_parse_int_src_ovr+0x0/0x9f [ 0.000000] [<ffffffff80232e61>] ? native_set_fixmap+0x45/0x49 [ 0.000000] [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f [ 0.000000] [<ffffffff8126d8e7>] acpi_boot_init+0x1cd/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000e10 + ffffffffff400000 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] early_iounmap(ffffffffff400e10, 00000078) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109 [ 0.000000] [<ffffffff8126d216>] ? acpi_parse_nmi_src+0x0/0x28 [ 0.000000] [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f [ 0.000000] [<ffffffff8126d929>] acpi_boot_init+0x20f/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fefce10, 00000078) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8128a2c5>] acpi_table_parse_entries+0x5d/0x109 [ 0.000000] [<ffffffff8126d216>] ? acpi_parse_nmi_src+0x0/0x28 [ 0.000000] [<ffffffff8128a38e>] acpi_table_parse_madt+0x1d/0x1f [ 0.000000] [<ffffffff8126d929>] acpi_boot_init+0x20f/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000e10 + ffffffffff400000 [ 0.000000] early_iounmap(ffffffffff400e10, 00000078) [0] [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81277fa0>] early_iounmap+0x4e/0xc4 [ 0.000000] [<ffffffff8126dccc>] __acpi_map_table+0x33/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8126d386>] ? acpi_parse_hpet+0x0/0x143 [ 0.000000] [<ffffffff8128a24e>] acpi_table_parse+0x4e/0x68 [ 0.000000] [<ffffffff8126d9b6>] acpi_boot_init+0x29c/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] early_ioremap(3fef7e90, 00000038) [0] => Pid: 0, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80228ed1>] ? native_make_pte+0x9/0xe [ 0.000000] [<ffffffff81278077>] __early_ioremap+0x61/0x16b [ 0.000000] [<ffffffff812781a9>] early_ioremap+0x13/0x15 [ 0.000000] [<ffffffff8126dcde>] __acpi_map_table+0x45/0x51 [ 0.000000] [<ffffffff80bde390>] acpi_os_map_memory+0x1e/0x20 [ 0.000000] [<ffffffff805eb813>] acpi_tb_verify_table+0x49/0xc3 [ 0.000000] [<ffffffff805eabfa>] acpi_get_table+0x50/0x98 [ 0.000000] [<ffffffff8126d386>] ? acpi_parse_hpet+0x0/0x143 [ 0.000000] [<ffffffff8128a24e>] acpi_table_parse+0x4e/0x68 [ 0.000000] [<ffffffff8126d9b6>] acpi_boot_init+0x29c/0x2a2 [ 0.000000] [<ffffffff81268744>] setup_arch+0x5e2/0x67c [ 0.000000] [<ffffffff80c307b5>] ? _spin_unlock+0x2b/0x2f [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff81261b73>] start_kernel+0xe9/0x40a [ 0.000000] [<ffffffff81261140>] ? early_idt_handler+0x0/0x73 [ 0.000000] [<ffffffff812612be>] x86_64_start_reservations+0xa9/0xad [ 0.000000] [<ffffffff81261421>] x86_64_start_kernel+0x13c/0x14b [ 0.000000] 00000e90 + ffffffffff400000 [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] mapped APIC to ffffffffff5fc000 (fee00000) [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:c0100000) [ 0.000000] dyn_array irq_2_pin_head+0x0/0x8 size:0x10 nr:256 align:0x1000 [ 0.000000] dyn_array irq_cfgx+0x0/0x8 size:0x420 nr:32 align:0x1000 [ 0.000000] dyn_array sparse_irqs+0x0/0x8 size:0x500 nr:32 align:0x1000 [ 0.000000] dyn_array total_size: 0x14000 [ 0.000000] dyn_array irq_2_pin_head+0x0/0x8 ==> [0x1e83000 - 0x1e84000] [ 0.000000] dyn_array irq_cfgx+0x0/0x8 ==> [0x1e84000 - 0x1e8c400] [ 0.000000] dyn_array sparse_irqs+0x0/0x8 ==> [0x1e8d000 - 0x1e97000] [ 0.000000] kstat_irqs ==> [0x1e97000 - 0x1e97200] [ 0.000000] PERCPU: Allocating 57344 bytes of per cpu data [ 0.000000] per cpu data for cpu0 on node0 at 0000000001e98000 [ 0.000000] per cpu data for cpu1 on node0 at 0000000001ea6000 [ 0.000000] per cpu data for cpu2 on node0 at 0000000001eb4000 [ 0.000000] per cpu data for cpu3 on node0 at 0000000001ec2000 [ 0.000000] NR_CPUS: 4096, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 255787 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/sda1 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 console=tty 5 profile=0 debug initcall_debug apic=debug apic=verbose ignore_loglevel sysrq_always_enabled pci=nomsi early_ioremap_debug [ 0.000000] kernel profiling enabled (shift: 0) [ 0.000000] debug: sysrq always enabled. [ 0.000000] Initializing CPU#0 [ 0.000000] found new irq_desc for irq 0 [ 0.000000] found new irq_desc for irq 1 [ 0.000000] found new irq_desc for irq 2 [ 0.000000] found new irq_desc for irq 3 [ 0.000000] found new irq_desc for irq 4 [ 0.000000] found new irq_desc for irq 5 [ 0.000000] found new irq_desc for irq 6 [ 0.000000] found new irq_desc for irq 7 [ 0.000000] found new irq_desc for irq 8 [ 0.000000] found new irq_desc for irq 9 [ 0.000000] found new irq_desc for irq 10 [ 0.000000] found new irq_desc for irq 11 [ 0.000000] found new irq_desc for irq 12 [ 0.000000] found new irq_desc for irq 13 [ 0.000000] found new irq_desc for irq 14 [ 0.000000] found new irq_desc for irq 15 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2933.341 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console handover: boot [earlyser0] -> real [tty0] [ 0.004000] console [ttyS0] enabled [ 0.004000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.004000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.004000] ... MAX_LOCK_DEPTH: 48 [ 0.004000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.004000] ... CLASSHASH_SIZE: 4096 [ 0.004000] ... MAX_LOCKDEP_ENTRIES: 8192 [ 0.004000] ... MAX_LOCKDEP_CHAINS: 16384 [ 0.004000] ... CHAINHASH_SIZE: 8192 [ 0.004000] memory used by lock dependency info: 3839 kB [ 0.004000] per task-struct memory footprint: 1920 bytes [ 0.004000] ------------------------ [ 0.004000] | Locking API testsuite: [ 0.004000] ---------------------------------------------------------------------------- [ 0.004000] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.004000] -------------------------------------------------------------------------- [ 0.004000] A-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.004000] A-B-B-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.004000] A-B-B-C-C-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.004000] A-B-C-A-B-C deadlock:failed|failed| ok |failed|failed|failed| [ 0.004000] A-B-B-C-C-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.004000] A-B-C-D-B-D-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.004000] A-B-C-D-B-C-D-A deadlock:failed|failed| ok |failed|failed|failed| [ 0.004000] double unlock: ok | ok | ok | ok | ok | ok | [ 0.004000] initialize held: ok | ok | ok | ok | ok | ok | [ 0.004000] bad unlock order: ok | ok | ok | ok | ok | ok | [ 0.004000] -------------------------------------------------------------------------- [ 0.004000] recursive read-lock: | ok | |failed| [ 0.004000] recursive read-lock #2: | ok | |failed| [ 0.004000] mixed read-write-lock: |failed| |failed| [ 0.004000] mixed write-read-lock: |failed| |failed| [ 0.004000] -------------------------------------------------------------------------- [ 0.004000] hard-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.004000] soft-irqs-on + irq-safe-A/12:failed|failed| ok | [ 0.004000] hard-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.004000] soft-irqs-on + irq-safe-A/21:failed|failed| ok | [ 0.004000] sirq-safe-A => hirqs-on/12:failed|failed| ok | [ 0.004000] sirq-safe-A => hirqs-on/21:failed|failed| ok | [ 0.004000] hard-safe-A + irqs-on/12:failed|failed| ok | [ 0.004000] soft-safe-A + irqs-on/12:failed|failed| ok | [ 0.004000] hard-safe-A + irqs-on/21:failed|failed| ok | [ 0.004000] soft-safe-A + irqs-on/21:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #1/123:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #1/132:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #1/213:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #1/231:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #1/312:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #1/321:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #2/123:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #2/132:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #2/213:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #2/231:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #2/312:failed|failed| ok | [ 0.004000] hard-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.004000] soft-safe-A + unsafe-B #2/321:failed|failed| ok | [ 0.004000] hard-irq lock-inversion/123:failed|failed| ok | [ 0.004000] soft-irq lock-inversion/123:failed|failed| ok | [ 0.004000] hard-irq lock-inversion/132:failed|failed| ok | [ 0.004000] soft-irq lock-inversion/132:failed|failed| ok | [ 0.004000] hard-irq lock-inversion/213:failed|failed| ok | [ 0.004000] soft-irq lock-inversion/213:failed|failed| ok | [ 0.004000] hard-irq lock-inversion/231:failed|failed| ok | [ 0.004000] soft-irq lock-inversion/231:failed|failed| ok | [ 0.004000] hard-irq lock-inversion/312:failed|failed| ok | [ 0.004000] soft-irq lock-inversion/312:failed|failed| ok | [ 0.004000] hard-irq lock-inversion/321:failed|failed| ok | [ 0.004000] soft-irq lock-inversion/321:failed|failed| ok | [ 0.004000] hard-irq read-recursion/123: ok | [ 0.004000] soft-irq read-recursion/123: ok | [ 0.004000] hard-irq read-recursion/132: ok | [ 0.004000] soft-irq read-recursion/132: ok | [ 0.004000] hard-irq read-recursion/213: ok | [ 0.004000] soft-irq read-recursion/213: ok | [ 0.004000] hard-irq read-recursion/231: ok | [ 0.004000] soft-irq read-recursion/231: ok | [ 0.004000] hard-irq read-recursion/312: ok | [ 0.004000] soft-irq read-recursion/312: ok | [ 0.004000] hard-irq read-recursion/321: ok | [ 0.004000] soft-irq read-recursion/321: ok | [ 0.004000] -------------------------------------------------------- [ 0.004000] 133 out of 218 testcases failed, as expected. | [ 0.004000] ---------------------------------------------------- [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] Memory: 952092k/1047552k available (10447k kernel code, 93972k reserved, 5618k data, 1468k init) [ 0.004000] CPA: page pool initialized 16 of 16 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.68 BogoMIPS (lpj=11733364) [ 0.008087] Security Framework initialized [ 0.012385] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.016782] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.020326] Mount-cache hash table entries: 256 [ 0.024616] Initializing cgroup subsys debug [ 0.028012] Initializing cgroup subsys ns [ 0.032013] Initializing cgroup subsys devices [ 0.036044] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.040006] CPU: L2 cache: 4096K [ 0.044007] CPU 0/0 -> Node 0 [ 0.046989] CPU: Physical Processor ID: 0 [ 0.048006] CPU: Processor Core ID: 0 [ 0.052012] CPU0: Thermal monitoring enabled (TM2) [ 0.056007] using mwait in idle threads. [ 0.060008] numa_add_cpu cpu 0 node 0: mask now 0 [ 0.064606] ACPI: Core revision 20080609 [ 0.082980] Parsing all Control Methods: [ 0.084273] Table [DSDT](id 0001) - 529 Objects with 55 Devices 147 Methods 32 Regions [ 0.088427] Parsing all Control Methods: [ 0.092258] Table [SSDT](id 0002) - 10 Objects with 0 Devices 4 Methods 0 Regions [ 0.096228] Parsing all Control Methods: [ 0.100260] Table [SSDT](id 0003) - 5 Objects with 0 Devices 3 Methods 0 Regions [ 0.104228] Parsing all Control Methods: [ 0.108263] Table [SSDT](id 0004) - 5 Objects with 0 Devices 3 Methods 0 Regions [ 0.112238] Parsing all Control Methods: [ 0.116267] Table [SSDT](id 0005) - 5 Objects with 0 Devices 3 Methods 0 Regions [ 0.120231] Parsing all Control Methods: [ 0.124268] Table [SSDT](id 0006) - 5 Objects with 0 Devices 3 Methods 0 Regions [ 0.128011] tbxface-0596 [02] tb_load_namespace : ACPI Tables successfully acquired [ 0.140013] evxfevnt-0091 [02] enable : Transition to ACPI mode successful [ 0.148171] Setting APIC routing to flat [ 0.152014] enabled ExtINT on CPU#0 [ 0.156156] ENABLING IO-APIC IRQs [ 0.159484] init IO_APIC IRQs [ 0.160013] 2-0<7> 0 add_pin_to_irq: irq 1 --> apic 0 pin 1 [ 0.168023] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.172016] 0 add_pin_to_irq: irq 0 --> apic 0 pin 2 [ 0.176015] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.180016] 0 add_pin_to_irq: irq 3 --> apic 0 pin 3 [ 0.184014] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 0.188015] 0 add_pin_to_irq: irq 4 --> apic 0 pin 4 [ 0.192014] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.196016] 0 add_pin_to_irq: irq 5 --> apic 0 pin 5 [ 0.200015] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) [ 0.204016] 0 add_pin_to_irq: irq 6 --> apic 0 pin 6 [ 0.208016] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.212017] 0 add_pin_to_irq: irq 7 --> apic 0 pin 7 [ 0.216016] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.220017] 0 add_pin_to_irq: irq 8 --> apic 0 pin 8 [ 0.224016] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.228018] 0 add_pin_to_irq: irq 9 --> apic 0 pin 9 [ 0.232017] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) [ 0.236018] 0 add_pin_to_irq: irq 10 --> apic 0 pin 10 [ 0.240018] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 0.244019] 0 add_pin_to_irq: irq 11 --> apic 0 pin 11 [ 0.248018] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) [ 0.252019] 0 add_pin_to_irq: irq 12 --> apic 0 pin 12 [ 0.256019] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.260020] 0 add_pin_to_irq: irq 13 --> apic 0 pin 13 [ 0.264019] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.268020] 0 add_pin_to_irq: irq 14 --> apic 0 pin 14 [ 0.272020] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.276021] 0 add_pin_to_irq: irq 15 --> apic 0 pin 15 [ 0.280020] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.284021] 2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected [ 0.291635] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.333484] CPU0: Intel(R) Core(TM)2 CPU E6800 @ 2.93GHz stepping 05 [ 0.340023] Using local APIC timer interrupts. [ 0.340023] calibrating APIC timer ... [ 0.348021] ... lapic delta = 1666650 [ 0.348021] ... PM timer delta = 357952 [ 0.348021] ... PM timer result ok [ 0.348021] ..... delta 1666650 [ 0.348021] ..... mult: 71577598 [ 0.348021] ..... calibration result: 1066656 [ 0.348021] ..... CPU clock speed is 2933.1227 MHz. [ 0.348021] ..... host bus clock speed is 266.2656 MHz. [ 0.348035] calling migration_init+0x0/0x5b [ 0.352091] initcall migration_init+0x0/0x5b returned 1 after 0 msecs [ 0.358401] initcall migration_init+0x0/0x5b returned with error code 1 [ 0.364024] calling spawn_ksoftirqd+0x0/0x58 [ 0.368083] initcall spawn_ksoftirqd+0x0/0x58 returned 0 after 0 msecs [ 0.376027] calling init_call_single_data+0x0/0x76 [ 0.380026] initcall init_call_single_data+0x0/0x76 returned 0 after 0 msecs [ 0.388026] calling relay_init+0x0/0x14 [ 0.392027] initcall relay_init+0x0/0x14 returned 0 after 0 msecs [ 0.398502] lockdep: fixing up alternatives. [ 0.400088] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] masked ExtINT on CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5866.69 BogoMIPS (lpj=11733398) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] numa_add_cpu cpu 1 node 0: mask now 0-1 [ 0.496639] CPU1: Intel(R) Core(TM)2 CPU E6800 @ 2.93GHz stepping 05 [ 0.505296] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.508064] Brought up 2 CPUs [ 0.512034] Total of 2 processors activated (11733.38 BogoMIPS). [ 0.516183] CPU0 attaching sched-domain: [ 0.520035] domain 0: span 0-1 level MC [ 0.525716] groups: 0 1 [ 0.528659] domain 1: span 0-1 level NODE [ 0.532032] groups: 0-1 [ 0.536249] CPU1 attaching sched-domain: [ 0.540036] domain 0: span 0-1 level MC [ 0.545716] groups: 1 0 [ 0.548662] domain 1: span 0-1 level NODE [ 0.552032] groups: 0-1 [ 0.556350] device: 'platform': device_add [ 0.560052] PM: Adding info for No Bus:platform [ 0.564118] bus: 'platform': registered [ 0.568037] Registering sysdev class 'cpu' [ 0.572276] calling net_ns_init+0x0/0x13e [ 0.576034] net_namespace: 1648 bytes [ 0.580046] initcall net_ns_init+0x0/0x13e returned 0 after 3 msecs [ 0.586410] calling init_smp_flush+0x0/0x66 [ 0.588033] initcall init_smp_flush+0x0/0x66 returned 0 after 0 msecs [ 0.594410] calling print_banner+0x0/0xe [ 0.596033] Booting paravirtualized kernel on bare hardware [ 0.600033] initcall print_banner+0x0/0xe returned 0 after 3 msecs [ 0.606409] calling sysctl_init+0x0/0x16 [ 0.608035] initcall sysctl_init+0x0/0x16 returned 0 after 0 msecs [ 0.616033] calling ksysfs_init+0x0/0xbb [ 0.620097] initcall ksysfs_init+0x0/0xbb returned 0 after 0 msecs [ 0.626411] calling init_jiffies_clocksource+0x0/0x12 [ 0.628034] initcall init_jiffies_clocksource+0x0/0x12 returned 0 after 0 msecs [ 0.634413] calling pm_init+0x0/0x34 [ 0.636040] initcall pm_init+0x0/0x34 returned 0 after 0 msecs [ 0.644034] calling filelock_init+0x0/0x2e [ 0.648039] initcall filelock_init+0x0/0x2e returned 0 after 0 msecs [ 0.654410] calling init_script_binfmt+0x0/0x12 [ 0.656037] initcall init_script_binfmt+0x0/0x12 returned 0 after 0 msecs [ 0.662410] calling init_elf_binfmt+0x0/0x12 [ 0.664033] initcall init_elf_binfmt+0x0/0x12 returned 0 after 0 msecs [ 0.672033] calling init_compat_elf_binfmt+0x0/0x12 [ 0.676034] initcall init_compat_elf_binfmt+0x0/0x12 returned 0 after 0 msecs [ 0.682410] calling debugfs_init+0x0/0x51 [ 0.684039] initcall debugfs_init+0x0/0x51 returned 0 after 0 msecs [ 0.692033] calling securityfs_init+0x0/0x51 [ 0.696038] initcall securityfs_init+0x0/0x51 returned 0 after 0 msecs [ 0.702410] calling random32_init+0x0/0xca [ 0.704034] initcall random32_init+0x0/0xca returned 0 after 0 msecs [ 0.712034] calling gnttab_init+0x0/0x16c [ 0.716033] initcall gnttab_init+0x0/0x16c returned -19 after 0 msecs [ 0.724033] calling cpuidle_init+0x0/0x40 [ 0.728040] initcall cpuidle_init+0x0/0x40 returned 0 after 0 msecs [ 0.734409] calling sock_init+0x0/0x5e [ 0.736094] initcall sock_init+0x0/0x5e returned 0 after 0 msecs [ 0.744033] calling netpoll_init+0x0/0x14 [ 0.748034] initcall netpoll_init+0x0/0x14 returned 0 after 0 msecs [ 0.754410] calling netlink_proto_init+0x0/0x14b [ 0.756069] NET: Registered protocol family 16 [ 0.760058] initcall netlink_proto_init+0x0/0x14b returned 0 after 3 msecs [ 0.766410] calling bdi_class_init+0x0/0x41 [ 0.768034] device class 'bdi': registering [ 0.772097] initcall bdi_class_init+0x0/0x41 returned 0 after 3 msecs [ 0.778410] calling kobject_uevent_init+0x0/0x45 [ 0.780040] initcall kobject_uevent_init+0x0/0x45 returned 0 after 0 msecs [ 0.786410] calling pcibus_class_init+0x0/0x19 [ 0.788033] device class 'pci_bus': registering [ 0.792096] initcall pcibus_class_init+0x0/0x19 returned 0 after 3 msecs [ 0.798411] calling pci_driver_init+0x0/0x12 [ 0.800096] bus: 'pci': registered [ 0.804034] initcall pci_driver_init+0x0/0x12 returned 0 after 3 msecs [ 0.812033] calling backlight_class_init+0x0/0x4d [ 0.816034] device class 'backlight': registering [ 0.820096] initcall backlight_class_init+0x0/0x4d returned 0 after 3 msecs [ 0.828033] calling dock_init+0x0/0x5a [ 0.832218] No dock devices found. [ 0.836033] initcall dock_init+0x0/0x5a returned 0 after 3 msecs [ 0.842409] calling xenbus_probe_init+0x0/0xf1 [ 0.844033] initcall xenbus_probe_init+0x0/0xf1 returned -19 after 0 msecs [ 0.850583] calling tty_class_init+0x0/0x31 [ 0.852033] device class 'tty': registering [ 0.856096] initcall tty_class_init+0x0/0x31 returned 0 after 3 msecs [ 0.864033] calling vtconsole_class_init+0x0/0xc3 [ 0.868034] device class 'vtconsole': registering [ 0.872096] device: 'vtcon0': device_add [ 0.876056] PM: Adding info for No Bus:vtcon0 [ 0.880096] initcall vtconsole_class_init+0x0/0xc3 returned 0 after 11 msecs [ 0.886496] calling register_node_type+0x0/0x45 [ 0.888033] Registering sysdev class 'node' [ 0.892096] initcall register_node_type+0x0/0x45 returned 0 after 3 msecs [ 0.898410] calling amd_postcore_init+0x0/0x859 [ 0.900033] initcall amd_postcore_init+0x0/0x859 returned 0 after 0 msecs [ 0.908034] calling arch_kdebugfs_init+0x0/0x24 [ 0.912039] initcall arch_kdebugfs_init+0x0/0x24 returned 0 after 0 msecs [ 0.920033] calling mtrr_if_init+0x0/0x94 [ 0.924038] initcall mtrr_if_init+0x0/0x94 returned 0 after 0 msecs [ 0.932033] calling acpi_pci_init+0x0/0x57 [ 0.936039] ACPI: bus type pci registered [ 0.940033] initcall acpi_pci_init+0x0/0x57 returned 0 after 3 msecs [ 0.946410] calling init_acpi_device_notify+0x0/0x4b [ 0.948033] initcall init_acpi_device_notify+0x0/0x4b returned 0 after 0 msecs [ 0.954413] calling setup_vcpu_hotplug_event+0x0/0x22 [ 0.956033] initcall setup_vcpu_hotplug_event+0x0/0x22 returned -19 after 0 msecs [ 0.962587] calling dmi_id_init+0x0/0x2f0 [ 0.964036] device class 'dmi': registering [ 0.968096] device: 'id': device_add [ 0.971686] PM: Adding info for No Bus:id [ 0.972096] initcall dmi_id_init+0x0/0x2f0 returned 0 after 7 msecs [ 0.980033] calling pci_arch_init+0x0/0x4e [ 0.984055] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 [ 0.988033] PCI: Not using MMCONFIG. [ 0.992034] PCI: Using configuration type 1 for base access [ 0.996039] initcall pci_arch_init+0x0/0x4e returned 0 after 11 msecs [ 1.002497] calling topology_init+0x0/0x7b [ 1.004033] Registering sys device of class 'node' [ 1.008037] Registering sys device 'node0' [ 1.012096] Registering sys device of class 'cpu' [ 1.016037] Registering sys device 'cpu0' [ 1.020096] Registering sys device of class 'cpu' [ 1.024037] Registering sys device 'cpu1' [ 1.028096] initcall topology_init+0x0/0x7b returned 0 after 22 msecs [ 1.036033] calling mtrr_init_finialize+0x0/0x3d [ 1.040034] initcall mtrr_init_finialize+0x0/0x3d returned 0 after 0 msecs [ 1.048033] calling param_sysfs_init+0x0/0x1d6 [ 1.086385] initcall param_sysfs_init+0x0/0x1d6 returned 0 after 30 msecs [ 1.092476] calling pm_sysrq_init+0x0/0x1e [ 1.096056] initcall pm_sysrq_init+0x0/0x1e returned 0 after 0 msecs [ 1.104034] calling readahead_init+0x0/0x38 [ 1.108061] device: 'default': device_add [ 1.112054] PM: Adding info for No Bus:default [ 1.116091] initcall readahead_init+0x0/0x38 returned 0 after 7 msecs [ 1.122411] calling init_bio+0x0/0xca [ 1.128305] initcall init_bio+0x0/0xca returned 0 after 0 msecs [ 1.132523] calling integrity_init+0x0/0x3a [ 1.140159] initcall integrity_init+0x0/0x3a returned 0 after 0 msecs [ 1.144592] calling blk_settings_init+0x0/0x2a [ 1.152105] initcall blk_settings_init+0x0/0x2a returned 0 after 0 msecs [ 1.160033] calling blk_ioc_init+0x0/0x2a [ 1.164039] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 msecs [ 1.170409] calling genhd_device_init+0x0/0x55 [ 1.176033] device class 'block': registering [ 1.180071] initcall genhd_device_init+0x0/0x55 returned 0 after 3 msecs [ 1.186410] calling blk_dev_integrity_init+0x0/0x2a [ 1.192038] initcall blk_dev_integrity_init+0x0/0x2a returned 0 after 0 msecs [ 1.198414] calling pci_slot_init+0x0/0x4a [ 1.204039] initcall pci_slot_init+0x0/0x4a returned 0 after 0 msecs [ 1.208033] calling fbmem_init+0x0/0x91 [ 1.212057] device class 'graphics': registering [ 1.216097] initcall fbmem_init+0x0/0x91 returned 0 after 3 msecs [ 1.224034] calling acpi_init+0x0/0x221 [ 1.229169] evgpeblk-0957 [04] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 [ 1.236203] ACPI: EC: Look up EC in DSDT [ 1.246704] Completing Region/Field/Buffer/Package initialization:................................................................................. [ 1.269987] Initialized 26/32 Regions 0/0 Fields 25/25 Buffers 30/30 Packages (568 nodes) [ 1.276034] Initializing Device/Processor/Thermal objects by executing _INI methods:. [ 1.284305] Executed 1 _INI methods requiring 0 _STA executions (examined 61 objects) [ 1.293480] evgpeblk-1054 [03] ev_initialize_gpe_bloc: Found 8 Wake, Enabled 2 Runtime GPEs in this block [ 1.304108] ACPI: Interpreter enabled [ 1.308033] ACPI: (supports S0 S5) [ 1.312655] ACPI: Using IOAPIC for interrupt routing [ 1.316127] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 [ 1.333006] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources [ 1.340034] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 1.350852] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 1.356034] initcall acpi_init+0x0/0x221 returned 0 after 122 msecs [ 1.360033] calling acpi_scan_init+0x0/0x110 [ 1.368097] bus: 'acpi': registered [ 1.368097] device: 'LNXSYSTM:00': device_add [ 1.376041] bus: 'acpi': add device LNXSYSTM:00 [ 1.380044] PM: Adding info for acpi:LNXSYSTM:00 [ 1.384091] device: 'LNXPWRBN:00': device_add [ 1.388039] bus: 'acpi': add device LNXPWRBN:00 [ 1.392050] PM: Adding info for acpi:LNXPWRBN:00 [ 1.396092] device: 'ACPI0007:00': device_add [ 1.400040] bus: 'acpi': add device ACPI0007:00 [ 1.404043] PM: Adding info for acpi:ACPI0007:00 [ 1.412091] device: 'ACPI0007:01': device_add [ 1.416040] bus: 'acpi': add device ACPI0007:01 [ 1.420043] PM: Adding info for acpi:ACPI0007:01 [ 1.424090] device: 'ACPI0007:02': device_add [ 1.428040] bus: 'acpi': add device ACPI0007:02 [ 1.432049] PM: Adding info for acpi:ACPI0007:02 [ 1.440090] device: 'ACPI0007:03': device_add [ 1.444048] bus: 'acpi': add device ACPI0007:03 [ 1.448044] PM: Adding info for acpi:ACPI0007:03 [ 1.452141] device: 'device:00': device_add [ 1.456040] bus: 'acpi': add device device:00 [ 1.460043] PM: Adding info for acpi:device:00 [ 1.464041] device: 'device:00': dev_uevent: bus uevent() returned -12 [ 1.472236] device: 'PNP0C0E:00': device_add [ 1.476046] bus: 'acpi': add device PNP0C0E:00 [ 1.480044] PM: Adding info for acpi:PNP0C0E:00 [ 1.484139] device: 'PNP0A03:00': device_add [ 1.492040] bus: 'acpi': add device PNP0A03:00 [ 1.496043] PM: Adding info for acpi:PNP0A03:00 [ 1.500144] device: 'PNP0C02:00': device_add [ 1.504040] bus: 'acpi': add device PNP0C02:00 [ 1.508043] PM: Adding info for acpi:PNP0C02:00 [ 1.516239] device: 'device:01': device_add [ 1.520040] bus: 'acpi': add device device:01 [ 1.524043] PM: Adding info for acpi:device:01 [ 1.528042] device: 'device:01': dev_uevent: bus uevent() returned -12 [ 1.536126] device: 'device:02': device_add [ 1.540039] bus: 'acpi': add device device:02 [ 1.544044] PM: Adding info for acpi:device:02 [ 1.548041] device: 'device:02': dev_uevent: bus uevent() returned -12 [ 1.552322] device: 'PNP0C0F:00': device_add [ 1.560040] bus: 'acpi': add device PNP0C0F:00 [ 1.564044] PM: Adding info for acpi:PNP0C0F:00 [ 1.568343] device: 'PNP0C0F:01': device_add [ 1.572040] bus: 'acpi': add device PNP0C0F:01 [ 1.576044] PM: Adding info for acpi:PNP0C0F:01 [ 1.580325] device: 'PNP0C0F:02': device_add [ 1.584040] bus: 'acpi': add device PNP0C0F:02 [ 1.592044] PM: Adding info for acpi:PNP0C0F:02 [ 1.596322] device: 'PNP0C0F:03': device_add [ 1.600040] bus: 'acpi': add device PNP0C0F:03 [ 1.604050] PM: Adding info for acpi:PNP0C0F:03 [ 1.608363] device: 'PNP0C0F:04': device_add [ 1.612040] bus: 'acpi': add device PNP0C0F:04 [ 1.616052] PM: Adding info for acpi:PNP0C0F:04 [ 1.624355] device: 'PNP0C0F:05': device_add [ 1.628040] bus: 'acpi': add device PNP0C0F:05 [ 1.632044] PM: Adding info for acpi:PNP0C0F:05 [ 1.636365] device: 'PNP0C0F:06': device_add [ 1.640040] bus: 'acpi': add device PNP0C0F:06 [ 1.644043] PM: Adding info for acpi:PNP0C0F:06 [ 1.648358] device: 'PNP0C0F:07': device_add [ 1.656041] bus: 'acpi': add device PNP0C0F:07 [ 1.660044] PM: Adding info for acpi:PNP0C0F:07 [ 1.664158] device: 'PNP0200:00': device_add [ 1.668040] bus: 'acpi': add device PNP0200:00 [ 1.672050] PM: Adding info for acpi:PNP0200:00 [ 1.676151] device: 'PNP0B00:00': device_add [ 1.680040] bus: 'acpi': add device PNP0B00:00 [ 1.688044] PM: Adding info for acpi:PNP0B00:00 [ 1.692149] device: 'PNP0000:00': device_add [ 1.696040] bus: 'acpi': add device PNP0000:00 [ 1.700044] PM: Adding info for acpi:PNP0000:00 [ 1.704154] device: 'PNP0C04:00': device_add [ 1.708050] bus: 'acpi': add device PNP0C04:00 [ 1.712044] PM: Adding info for acpi:PNP0C04:00 [ 1.716146] device: 'PNP0100:00': device_add [ 1.724040] bus: 'acpi': add device PNP0100:00 [ 1.728044] PM: Adding info for acpi:PNP0100:00 [ 1.732144] device: 'PNP0800:00': device_add [ 1.736040] bus: 'acpi': add device PNP0800:00 [ 1.740044] PM: Adding info for acpi:PNP0800:00 [ 1.744150] device: 'PNP0C02:01': device_add [ 1.748040] bus: 'acpi': add device PNP0C02:01 [ 1.752044] PM: Adding info for acpi:PNP0C02:01 [ 1.760780] device: 'PNP0700:00': device_add [ 1.764041] bus: 'acpi': add device PNP0700:00 [ 1.768044] PM: Adding info for acpi:PNP0700:00 [ 1.772866] device: 'PNP0401:00': device_add [ 1.776049] bus: 'acpi': add device PNP0401:00 [ 1.780050] PM: Adding info for acpi:PNP0401:00 [ 1.788310] device: 'PNP0F03:00': device_add [ 1.792041] bus: 'acpi': add device PNP0F03:00 [ 1.796044] PM: Adding info for acpi:PNP0F03:00 [ 1.800307] device: 'PNP0303:00': device_add [ 1.804041] bus: 'acpi': add device PNP0303:00 [ 1.808044] PM: Adding info for acpi:PNP0303:00 [ 1.812687] device: 'PNP0501:00': device_add [ 1.820041] bus: 'acpi': add device PNP0501:00 [ 1.824044] PM: Adding info for acpi:PNP0501:00 [ 1.828405] device: 'device:03': device_add [ 1.832041] bus: 'acpi': add device device:03 [ 1.836044] PM: Adding info for acpi:device:03 [ 1.840042] device: 'device:03': dev_uevent: bus uevent() returned -12 [ 1.848251] device: 'device:04': device_add [ 1.852040] bus: 'acpi': add device device:04 [ 1.856044] PM: Adding info for acpi:device:04 [ 1.860041] device: 'device:04': dev_uevent: bus uevent() returned -12 [ 1.868255] device: 'device:05': device_add [ 1.872040] bus: 'acpi': add device device:05 [ 1.876044] PM: Adding info for acpi:device:05 [ 1.880041] device: 'device:05': dev_uevent: bus uevent() returned -12 [ 1.888247] device: 'device:06': device_add [ 1.892040] bus: 'acpi': add device device:06 [ 1.896044] PM: Adding info for acpi:device:06 [ 1.900041] device: 'device:06': dev_uevent: bus uevent() returned -12 [ 1.908244] device: 'device:07': device_add [ 1.912040] bus: 'acpi': add device device:07 [ 1.916044] PM: Adding info for acpi:device:07 [ 1.920041] device: 'device:07': dev_uevent: bus uevent() returned -12 [ 1.928058] device: 'device:08': device_add [ 1.932050] bus: 'acpi': add device device:08 [ 1.936044] PM: Adding info for acpi:device:08 [ 1.940042] device: 'device:08': dev_uevent: bus uevent() returned -12 [ 1.948141] device: 'PNP0003:00': device_add [ 1.952039] bus: 'acpi': add device PNP0003:00 [ 1.956044] PM: Adding info for acpi:PNP0003:00 [ 1.960495] device: 'device:09': device_add [ 1.964044] bus: 'acpi': add device device:09 [ 1.968052] PM: Adding info for acpi:device:09 [ 1.976042] device: 'device:09': dev_uevent: bus uevent() returned -12 [ 1.980366] device: 'device:0a': device_add [ 1.984046] bus: 'acpi': add device device:0a [ 1.988053] PM: Adding info for acpi:device:0a [ 1.992042] device: 'device:0a': dev_uevent: bus uevent() returned -12 [ 2.004411] device: 'device:0b': device_add [ 2.008040] bus: 'acpi': add device device:0b [ 2.012044] PM: Adding info for acpi:device:0b [ 2.016041] device: 'device:0b': dev_uevent: bus uevent() returned -12 [ 2.024407] device: 'device:0c': device_add [ 2.028043] bus: 'acpi': add device device:0c [ 2.032044] PM: Adding info for acpi:device:0c [ 2.036042] device: 'device:0c': dev_uevent: bus uevent() returned -12 [ 2.044417] device: 'device:0d': device_add [ 2.048040] bus: 'acpi': add device device:0d [ 2.056050] PM: Adding info for acpi:device:0d [ 2.060042] device: 'device:0d': dev_uevent: bus uevent() returned -12 [ 2.064401] device: 'device:0e': device_add [ 2.068040] bus: 'acpi': add device device:0e [ 2.076044] PM: Adding info for acpi:device:0e [ 2.080041] device: 'device:0e': dev_uevent: bus uevent() returned -12 [ 2.084397] device: 'device:0f': device_add [ 2.088040] bus: 'acpi': add device device:0f [ 2.096044] PM: Adding info for acpi:device:0f [ 2.100041] device: 'device:0f': dev_uevent: bus uevent() returned -12 [ 2.104148] device: 'device:10': device_add [ 2.108040] bus: 'acpi': add device device:10 [ 2.112051] PM: Adding info for acpi:device:10 [ 2.120042] device: 'device:10': dev_uevent: bus uevent() returned -12 [ 2.124188] device: 'device:11': device_add [ 2.128039] bus: 'acpi': add device device:11 [ 2.132044] PM: Adding info for acpi:device:11 [ 2.140042] device: 'device:11': dev_uevent: bus uevent() returned -12 [ 2.144141] device: 'device:12': device_add [ 2.148039] bus: 'acpi': add device device:12 [ 2.152044] PM: Adding info for acpi:device:12 [ 2.156042] device: 'device:12': dev_uevent: bus uevent() returned -12 [ 2.164139] device: 'device:13': device_add [ 2.168039] bus: 'acpi': add device device:13 [ 2.172044] PM: Adding info for acpi:device:13 [ 2.176042] device: 'device:13': dev_uevent: bus uevent() returned -12 [ 2.184154] device: 'device:14': device_add [ 2.188040] bus: 'acpi': add device device:14 [ 2.192044] PM: Adding info for acpi:device:14 [ 2.196042] device: 'device:14': dev_uevent: bus uevent() returned -12 [ 2.204141] device: 'device:15': device_add [ 2.208048] bus: 'acpi': add device device:15 [ 2.212045] PM: Adding info for acpi:device:15 [ 2.216042] device: 'device:15': dev_uevent: bus uevent() returned -12 [ 2.224137] device: 'device:16': device_add [ 2.228039] bus: 'acpi': add device device:16 [ 2.232044] PM: Adding info for acpi:device:16 [ 2.236042] device: 'device:16': dev_uevent: bus uevent() returned -12 [ 2.244134] device: 'device:17': device_add [ 2.248045] bus: 'acpi': add device device:17 [ 2.252045] PM: Adding info for acpi:device:17 [ 2.256042] device: 'device:17': dev_uevent: bus uevent() returned -12 [ 2.264133] device: 'device:18': device_add [ 2.268039] bus: 'acpi': add device device:18 [ 2.272044] PM: Adding info for acpi:device:18 [ 2.276042] device: 'device:18': dev_uevent: bus uevent() returned -12 [ 2.284129] device: 'device:19': device_add [ 2.288039] bus: 'acpi': add device device:19 [ 2.292044] PM: Adding info for acpi:device:19 [ 2.296042] device: 'device:19': dev_uevent: bus uevent() returned -12 [ 2.304129] device: 'device:1a': device_add [ 2.308039] bus: 'acpi': add device device:1a [ 2.312051] PM: Adding info for acpi:device:1a [ 2.316042] device: 'device:1a': dev_uevent: bus uevent() returned -12 [ 2.320080] device: 'LNXTHERM:00': device_add [ 2.328039] bus: 'acpi': add device LNXTHERM:00 [ 2.332044] PM: Adding info for acpi:LNXTHERM:00 [ 2.336090] initcall acpi_scan_init+0x0/0x110 returned 0 after 923 msecs [ 2.342585] calling acpi_ec_init+0x0/0x61 [ 2.348039] bus: 'acpi': add driver ec [ 2.352156] initcall acpi_ec_init+0x0/0x61 returned 0 after 3 msecs [ 2.356033] calling acpi_pci_root_init+0x0/0x28 [ 2.360033] bus: 'acpi': add driver pci_root [ 2.364046] bus: 'acpi': driver_probe_device: matched device PNP0A03:00 with driver pci_root [ 2.376033] bus: 'acpi': really_probe: probing driver pci_root with device PNP0A03:00 [ 2.384052] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 2.388086] device: 'pci0000:00': device_add [ 2.392058] PM: Adding info for No Bus:pci0000:00 [ 2.396034] device: '0000:00': device_add [ 2.400051] PM: Adding info for No Bus:0000:00 [ 2.404088] PCI: Scanning bus 0000:00 [ 2.408054] pci 0000:00:00.0: found [8086/277c] class 000600 header type 00 [ 2.416060] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2f [ 2.424056] pci 0000:00:01.0: found [8086/277d] class 000604 header type 01 [ 2.428050] pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x2f [ 2.436038] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 2.444034] pci 0000:00:01.0: PME# disabled [ 2.448083] pci 0000:00:1b.0: found [8086/27d8] class 000403 header type 00 [ 2.452044] PCI: 0000:00:1b.0 reg 10 64bit mmio: [50400000, 50403fff] [ 2.460066] pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x2f [ 2.467454] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 2.472035] pci 0000:00:1b.0: PME# disabled [ 2.476048] pci 0000:00:1c.0: found [8086/27d0] class 000604 header type 01 [ 2.484063] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x2f [ 2.492044] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.496035] pci 0000:00:1c.0: PME# disabled [ 2.500053] pci 0000:00:1c.4: found [8086/27e0] class 000604 header type 01 [ 2.508059] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x2f [ 2.520043] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 2.524035] pci 0000:00:1c.4: PME# disabled [ 2.528048] pci 0000:00:1c.5: found [8086/27e2] class 000604 header type 01 [ 2.536059] pci 0000:00:1c.5: calling pci_fixup_transparent_bridge+0x0/0x2f [ 2.544044] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 2.548035] pci 0000:00:1c.5: PME# disabled [ 2.552046] pci 0000:00:1d.0: found [8086/27c8] class 000c03 header type 00 [ 2.560059] PCI: 0000:00:1d.0 reg 20 io port: [4080, 409f] [ 2.564046] pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x2f [ 2.572045] pci 0000:00:1d.1: found [8086/27c9] class 000c03 header type 00 [ 2.580059] PCI: 0000:00:1d.1 reg 20 io port: [4060, 407f] [ 2.584046] pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x2f [ 2.592045] pci 0000:00:1d.2: found [8086/27ca] class 000c03 header type 00 [ 2.600059] PCI: 0000:00:1d.2 reg 20 io port: [4040, 405f] [ 2.604046] pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x2f [ 2.611462] pci 0000:00:1d.3: found [8086/27cb] class 000c03 header type 00 [ 2.620059] PCI: 0000:00:1d.3 reg 20 io port: [4020, 403f] [ 2.624046] pci 0000:00:1d.3: calling pci_fixup_transparent_bridge+0x0/0x2f [ 2.632067] pci 0000:00:1d.7: found [8086/27cc] class 000c03 header type 00 [ 2.636041] PCI: 0000:00:1d.7 reg 10 32bit mmio: [50404400, 504047ff] [ 2.644074] pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x2f [ 2.651455] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 2.656036] pci 0000:00:1d.7: PME# disabled [ 2.660052] pci 0000:00:1e.0: found [8086/244e] class 000604 header type 01 [ 2.668052] pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x2f [ 2.676063] pci 0000:00:1f.0: found [8086/27b0] class 000601 header type 00 [ 2.684085] pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x2f [ 2.688049] pci 0000:00:1f.1: found [8086/27df] class 000101 header type 00 [ 2.696041] PCI: 0000:00:1f.1 reg 10 io port: [0, 7] [ 2.700038] PCI: 0000:00:1f.1 reg 14 io port: [0, 3] [ 2.708038] PCI: 0000:00:1f.1 reg 18 io port: [0, 7] [ 2.712038] PCI: 0000:00:1f.1 reg 1c io port: [0, 3] [ 2.716038] PCI: 0000:00:1f.1 reg 20 io port: [40b0, 40bf] [ 2.724048] pci 0000:00:1f.1: calling pci_fixup_transparent_bridge+0x0/0x2f [ 2.728068] pci 0000:00:1f.2: found [8086/27c0] class 000101 header type 00 [ 2.736040] PCI: 0000:00:1f.2 reg 10 io port: [40c8, 40cf] [ 2.740040] PCI: 0000:00:1f.2 reg 14 io port: [40e4, 40e7] [ 2.748037] PCI: 0000:00:1f.2 reg 18 io port: [40c0, 40c7] [ 2.752037] PCI: 0000:00:1f.2 reg 1c io port: [40e0, 40e3] [ 2.760037] PCI: 0000:00:1f.2 reg 20 io port: [40a0, 40af] [ 2.764037] PCI: 0000:00:1f.2 reg 24 32bit mmio: [50404000, 504043ff] [ 2.772045] pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x2f [ 2.776037] pci 0000:00:1f.2: PME# supported from D3hot [ 2.784035] pci 0000:00:1f.2: PME# disabled [ 2.788046] pci 0000:00:1f.3: found [8086/27da] class 000c05 header type 00 [ 2.792065] PCI: 0000:00:1f.3 reg 20 io port: [4000, 401f] [ 2.800050] pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2f [ 2.808039] PCI: Fixups for bus 0000:00 [ 2.808039] pci 0000:00:01.0: scanning behind bridge, config 010100, pass 0 [ 2.816039] PCI: Scanning bus 0000:01 [ 2.820051] pci 0000:01:00.0: found [1002/7249] class 000300 header type 00 [ 2.828033] pci 0000:01:00.0: calling quirk_no_ata_d3+0x0/0x20 [ 2.832039] PCI: 0000:01:00.0 reg 10 32bit mmio: [40000000, 4fffffff] [ 2.840045] PCI: 0000:01:00.0 reg 18 64bit mmio: [50300000, 5030ffff] [ 2.848037] PCI: 0000:01:00.0 reg 20 io port: [3000, 30ff] [ 2.852041] PCI: 0000:01:00.0 reg 30 32bit mmio: [fffe0000, ffffffff] [ 2.860047] pci 0000:01:00.0: supports D1 [ 2.864033] pci 0000:01:00.0: supports D2 [ 2.868051] pci 0000:01:00.1: found [1002/7269] class 000380 header type 00 [ 2.872033] pci 0000:01:00.1: calling quirk_no_ata_d3+0x0/0x20 [ 2.878333] PCI: 0000:01:00.1 reg 10 64bit mmio: [50310000, 5031ffff] [ 2.884065] pci 0000:01:00.1: supports D1 [ 2.888033] pci 0000:01:00.1: supports D2 [ 2.892046] Pre-1.1 PCIe device detected, disable ASPM for 0000:00:01.0. It can be enabled forcedly with 'pcie_aspm=force' [ 2.904065] PCI: Fixups for bus 0000:01 [ 2.908034] PCI: bridge 0000:00:01.0 io port: [3000, 3fff] [ 2.916034] PCI: bridge 0000:00:01.0 32bit mmio: [50300000, 503fffff] [ 2.920036] PCI: bridge 0000:00:01.0 64bit mmio pref: [40000000, 4fffffff] [ 2.928033] PCI: Bus scan for 0000:01 returning with max=01 [ 2.932035] pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 0 [ 2.940040] PCI: Scanning bus 0000:02 [ 2.944061] pci 0000:02:00.0: found [1131/7162] class 000480 header type 00 [ 2.952050] PCI: 0000:02:00.0 reg 10 64bit mmio: [50200000, 502fffff] [ 2.956100] pci 0000:02:00.0: supports D1 [ 2.960033] pci 0000:02:00.0: supports D2 [ 2.964033] pci 0000:02:00.0: PME# supported from D0 D1 D2 [ 2.972036] pci 0000:02:00.0: PME# disabled [ 2.976044] Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.0. It can be enabled forcedly with 'pcie_aspm=force' [ 2.988065] PCI: Fixups for bus 0000:02 [ 2.992037] PCI: bridge 0000:00:1c.0 32bit mmio: [50200000, 502fffff] [ 2.996040] PCI: Bus scan for 0000:02 returning with max=02 [ 3.004035] pci 0000:00:1c.4: scanning behind bridge, config 030300, pass 0 [ 3.008040] PCI: Scanning bus 0000:03 [ 3.012066] PCI: Fixups for bus 0000:03 [ 3.016042] PCI: Bus scan for 0000:03 returning with max=03 [ 3.024035] pci 0000:00:1c.5: scanning behind bridge, config 040400, pass 0 [ 3.036040] PCI: Scanning bus 0000:04 [ 3.036081] pci 0000:04:00.0: found [8086/109a] class 000200 header type 00 [ 3.044048] PCI: 0000:04:00.0 reg 10 32bit mmio: [50100000, 5011ffff] [ 3.052055] PCI: 0000:04:00.0 reg 18 io port: [2000, 201f] [ 3.056097] pci 0000:04:00.0: calling pci_fixup_transparent_bridge+0x0/0x2f [ 3.064043] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 3.072038] pci 0000:04:00.0: PME# disabled [ 3.076053] Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.5. It can be enabled forcedly with 'pcie_aspm=force' [ 3.084065] PCI: Fixups for bus 0000:04 [ 3.088035] PCI: bridge 0000:00:1c.5 io port: [2000, 2fff] [ 3.096035] PCI: bridge 0000:00:1c.5 32bit mmio: [50100000, 501fffff] [ 3.100037] PCI: Bus scan for 0000:04 returning with max=04 [ 3.108035] pci 0000:00:1e.0: scanning behind bridge, config 050500, pass 0 [ 3.112040] PCI: Scanning bus 0000:05 [ 3.116059] pci 0000:05:02.0: found [1814/0301] class 000280 header type 00 [ 3.124041] PCI: 0000:05:02.0 reg 10 32bit mmio: [50000000, 50007fff] [ 3.132105] pci 0000:05:04.0: found [104c/8024] class 000c00 header type 00 [ 3.136042] PCI: 0000:05:04.0 reg 10 32bit mmio: [5000c000, 5000c7ff] [ 3.144038] PCI: 0000:05:04.0 reg 14 32bit mmio: [50008000, 5000bfff] [ 3.152075] pci 0000:05:04.0: supports D1 [ 3.156033] pci 0000:05:04.0: supports D2 [ 3.160033] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot [ 3.164036] pci 0000:05:04.0: PME# disabled [ 3.168057] pci 0000:05:05.0: found [1095/3114] class 000104 header type 00 [ 3.176041] PCI: 0000:05:05.0 reg 10 io port: [1018, 101f] [ 3.180038] PCI: 0000:05:05.0 reg 14 io port: [1024, 1027] [ 3.188038] PCI: 0000:05:05.0 reg 18 io port: [1010, 1017] [ 3.192038] PCI: 0000:05:05.0 reg 1c io port: [1020, 1023] [ 3.200038] PCI: 0000:05:05.0 reg 20 io port: [1000, 100f] [ 3.204038] PCI: 0000:05:05.0 reg 24 32bit mmio: [5000c800, 5000cbff] [ 3.212038] PCI: 0000:05:05.0 reg 30 32bit mmio: [fff80000, ffffffff] [ 3.216047] pci 0000:05:05.0: supports D1 [ 3.220033] pci 0000:05:05.0: supports D2 [ 3.224068] PCI: Fixups for bus 0000:05 [ 3.228033] pci 0000:00:1e.0: transparent bridge [ 3.232035] PCI: bridge 0000:00:1e.0 io port: [1000, 1fff] [ 3.240035] PCI: bridge 0000:00:1e.0 32bit mmio: [50000000, 500fffff] [ 3.244037] PCI: Bus scan for 0000:05 returning with max=05 [ 3.252038] pci 0000:00:01.0: scanning behind bridge, config 010100, pass 1 [ 3.256036] pci 0000:00:1c.0: scanning behind bridge, config 020200, pass 1 [ 3.264037] pci 0000:00:1c.4: scanning behind bridge, config 030300, pass 1 [ 3.272037] pci 0000:00:1c.5: scanning behind bridge, config 040400, pass 1 [ 3.280037] pci 0000:00:1e.0: scanning behind bridge, config 050500, pass 1 [ 3.284036] PCI: Bus scan for 0000:00 returning with max=05 [ 3.292043] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 3.300657] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 3.308440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 3.316743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 3.320725] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 3.328785] device: '0000:00:00.0': device_add [ 3.332803] bus: 'pci': add device 0000:00:00.0 [ 3.340072] PM: Adding info for pci:0000:00:00.0 [ 3.344093] device: '0000:00:01.0': device_add [ 3.348789] bus: 'pci': add device 0000:00:01.0 [ 3.352074] PM: Adding info for pci:0000:00:01.0 [ 3.360056] device: '0000:00:1b.0': device_add [ 3.364264] bus: 'pci': add device 0000:00:1b.0 [ 3.368065] PM: Adding info for pci:0000:00:1b.0 [ 3.372092] device: '0000:00:1c.0': device_add [ 3.377052] bus: 'pci': add device 0000:00:1c.0 [ 3.384066] PM: Adding info for pci:0000:00:1c.0 [ 3.388092] device: '0000:00:1c.4': device_add [ 3.393036] bus: 'pci': add device 0000:00:1c.4 [ 3.396072] PM: Adding info for pci:0000:00:1c.4 [ 3.404092] device: '0000:00:1c.5': device_add [ 3.408578] bus: 'pci': add device 0000:00:1c.5 [ 3.412072] PM: Adding info for pci:0000:00:1c.5 [ 3.416092] device: '0000:00:1d.0': device_add [ 3.421015] bus: 'pci': add device 0000:00:1d.0 [ 3.428073] PM: Adding info for pci:0000:00:1d.0 [ 3.432092] device: '0000:00:1d.1': device_add [ 3.437005] bus: 'pci': add device 0000:00:1d.1 [ 3.440072] PM: Adding info for pci:0000:00:1d.1 [ 3.448092] device: '0000:00:1d.2': device_add [ 3.452811] bus: 'pci': add device 0000:00:1d.2 [ 3.456072] PM: Adding info for pci:0000:00:1d.2 [ 3.460092] device: '0000:00:1d.3': device_add [ 3.464984] bus: 'pci': add device 0000:00:1d.3 [ 3.472080] PM: Adding info for pci:0000:00:1d.3 [ 3.476092] device: '0000:00:1d.7': device_add [ 3.480973] bus: 'pci': add device 0000:00:1d.7 [ 3.488066] PM: Adding info for pci:0000:00:1d.7 [ 3.492091] device: '0000:00:1e.0': device_add [ 3.496952] bus: 'pci': add device 0000:00:1e.0 [ 3.500067] PM: Adding info for pci:0000:00:1e.0 [ 3.504092] device: '0000:00:1f.0': device_add [ 3.512956] bus: 'pci': add device 0000:00:1f.0 [ 3.516072] PM: Adding info for pci:0000:00:1f.0 [ 3.520092] device: '0000:00:1f.1': device_add [ 3.524941] bus: 'pci': add device 0000:00:1f.1 [ 3.532072] PM: Adding info for pci:0000:00:1f.1 [ 3.536092] device: '0000:00:1f.2': device_add [ 3.540944] bus: 'pci': add device 0000:00:1f.2 [ 3.548088] PM: Adding info for pci:0000:00:1f.2 [ 3.552091] device: '0000:00:1f.3': device_add [ 3.556911] bus: 'pci': add device 0000:00:1f.3 [ 3.560076] PM: Adding info for pci:0000:00:1f.3 [ 3.568091] device: '0000:01:00.0': device_add [ 3.572040] bus: 'pci': add device 0000:01:00.0 [ 3.576071] PM: Adding info for pci:0000:01:00.0 [ 3.580091] device: '0000:01:00.1': device_add [ 3.584040] bus: 'pci': add device 0000:01:00.1 [ 3.588065] PM: Adding info for pci:0000:01:00.1 [ 3.596091] device: '0000:01': device_add [ 3.600058] PM: Adding info for No Bus:0000:01 [ 3.604090] device: '0000:02:00.0': device_add [ 3.608049] bus: 'pci': add device 0000:02:00.0 [ 3.612071] PM: Adding info for pci:0000:02:00.0 [ 3.616091] device: '0000:02': device_add [ 3.620053] PM: Adding info for No Bus:0000:02 [ 3.624090] device: '0000:03': device_add [ 3.628053] PM: Adding info for No Bus:0000:03 [ 3.632090] device: '0000:04:00.0': device_add [ 3.640042] bus: 'pci': add device 0000:04:00.0 [ 3.644071] PM: Adding info for pci:0000:04:00.0 [ 3.648091] device: '0000:04': device_add [ 3.652062] PM: Adding info for No Bus:0000:04 [ 3.656090] device: '0000:05:02.0': device_add [ 3.660041] bus: 'pci': add device 0000:05:02.0 [ 3.664072] PM: Adding info for pci:0000:05:02.0 [ 3.668091] device: '0000:05:04.0': device_add [ 3.676042] bus: 'pci': add device 0000:05:04.0 [ 3.680072] PM: Adding info for pci:0000:05:04.0 [ 3.684091] device: '0000:05:05.0': device_add [ 3.688042] bus: 'pci': add device 0000:05:05.0 [ 3.692071] PM: Adding info for pci:0000:05:05.0 [ 3.696091] device: '0000:05': device_add [ 3.700052] PM: Adding info for No Bus:0000:05 [ 3.704090] driver: 'PNP0A03:00': driver_bound: bound to device 'pci_root' [ 3.712034] bus: 'acpi': really_probe: bound device PNP0A03:00 to driver pci_root [ 3.720147] initcall acpi_pci_root_init+0x0/0x28 returned 0 after 1296 msecs [ 3.728033] calling acpi_pci_link_init+0x0/0x48 [ 3.732034] bus: 'acpi': add driver pci_link [ 3.736051] bus: 'acpi': driver_probe_device: matched device PNP0C0F:00 with driver pci_link [ 3.744033] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:00 [ 3.752328] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 3.760746] driver: 'PNP0C0F:00': driver_bound: bound to device 'pci_link' [ 3.768037] bus: 'acpi': really_probe: bound device PNP0C0F:00 to driver pci_link [ 3.776034] bus: 'acpi': driver_probe_device: matched device PNP0C0F:01 with driver pci_link [ 3.784033] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:01 [ 3.792308] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) [ 3.798453] driver: 'PNP0C0F:01': driver_bound: bound to device 'pci_link' [ 3.804034] bus: 'acpi': really_probe: bound device PNP0C0F:01 to driver pci_link [ 3.812034] bus: 'acpi': driver_probe_device: matched device PNP0C0F:02 with driver pci_link [ 3.820033] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:02 [ 3.828307] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) [ 3.836450] driver: 'PNP0C0F:02': driver_bound: bound to device 'pci_link' [ 3.844034] bus: 'acpi': really_probe: bound device PNP0C0F:02 to driver pci_link [ 3.852034] bus: 'acpi': driver_probe_device: matched device PNP0C0F:03 with driver pci_link [ 3.860033] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:03 [ 3.868308] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12) [ 3.874452] driver: 'PNP0C0F:03': driver_bound: bound to device 'pci_link' [ 3.880034] bus: 'acpi': really_probe: bound device PNP0C0F:03 to driver pci_link [ 3.888034] bus: 'acpi': driver_probe_device: matched device PNP0C0F:04 with driver pci_link [ 3.896033] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:04 [ 3.904314] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 3.913616] driver: 'PNP0C0F:04': driver_bound: bound to device 'pci_link' [ 3.920034] bus: 'acpi': really_probe: bound device PNP0C0F:04 to driver pci_link [ 3.928034] bus: 'acpi': driver_probe_device: matched device PNP0C0F:05 with driver pci_link [ 3.936033] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:05 [ 3.948306] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 3.955238] driver: 'PNP0C0F:05': driver_bound: bound to device 'pci_link' [ 3.960034] bus: 'acpi': really_probe: bound device PNP0C0F:05 to driver pci_link [ 3.968034] bus: 'acpi': driver_probe_device: matched device PNP0C0F:06 with driver pci_link [ 3.976033] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:06 [ 3.984306] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) [ 3.993039] driver: 'PNP0C0F:06': driver_bound: bound to device 'pci_link' [ 4.000034] bus: 'acpi': really_probe: bound device PNP0C0F:06 to driver pci_link [ 4.008034] bus: 'acpi': driver_probe_device: matched device PNP0C0F:07 with driver pci_link [ 4.016033] bus: 'acpi': really_probe: probing driver pci_link with device PNP0C0F:07 [ 4.024178] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) [ 4.030455] driver: 'PNP0C0F:07': driver_bound: bound to device 'pci_link' [ 4.036034] bus: 'acpi': really_probe: bound device PNP0C0F:07 to driver pci_link [ 4.044133] initcall acpi_pci_link_init+0x0/0x48 returned 0 after 297 msecs [ 4.054585] calling acpi_power_init+0x0/0x77 [ 4.060038] bus: 'acpi': add driver power [ 4.064156] initcall acpi_power_init+0x0/0x77 returned 0 after 3 msecs [ 4.068033] calling acpi_system_init+0x0/0x25f [ 4.072190] initcall acpi_system_init+0x0/0x25f returned 0 after 3 msecs [ 4.080033] calling acpi_debug_init+0x0/0xa5 [ 4.084050] initcall acpi_debug_init+0x0/0xa5 returned 0 after 0 msecs [ 4.092033] calling acpi_wmi_init+0x0/0x4f [ 4.096034] bus: 'acpi': add driver wmi [ 4.100156] ACPI: WMI: Mapper loaded [ 4.104035] initcall acpi_wmi_init+0x0/0x4f returned 0 after 7 msecs [ 4.110409] calling acpi_cm_sbs_init+0x0/0x8 [ 4.116033] initcall acpi_cm_sbs_init+0x0/0x8 returned 0 after 0 msecs [ 4.120032] calling pnp_init+0x0/0x20 [ 4.124033] Linux Plug and Play Support v0.97 (c) Adam Belay [ 4.132091] bus: 'pnp': registered [ 4.132091] initcall pnp_init+0x0/0x20 returned 0 after 7 msecs [ 4.140033] calling pnpacpi_init+0x0/0x8c [ 4.144033] pnp: PnP ACPI init [ 4.147106] device: 'pnp0': device_add [ 4.152043] PM: Adding info for No Bus:pnp0 [ 4.156034] ACPI: bus type pnp registered [ 4.160071] pnp 00:00: parse allocated resources [ 4.170505] pnp 00:00: add io 0xcf8-0xcff flags 0x1 [ 4.176037] device: '00:00': device_add [ 4.180070] bus: 'pnp': add device 00:00 [ 4.184044] PM: Adding info for pnp:00:00 [ 4.188089] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 4.193783] pnp 00:01: parse allocated resources [ 4.200051] pnp 00:01: add mem 0xf0000000-0xf3ffffff flags 0x0 [ 4.204034] pnp 00:01: add mem 0xfed13000-0xfed13fff flags 0x0 [ 4.212034] pnp 00:01: add mem 0xfed14000-0xfed17fff flags 0x0 [ 4.216034] pnp 00:01: add mem 0xfed18000-0xfed18fff flags 0x0 [ 4.224034] pnp 00:01: add mem 0xfed19000-0xfed19fff flags 0x0 [ 4.228034] pnp 00:01: add mem 0xfed1c000-0xfed1ffff flags 0x0 [ 4.236034] pnp 00:01: add mem 0xfed20000-0xfed3ffff flags 0x0 [ 4.240034] pnp 00:01: add mem 0xfed45000-0xfed99fff flags 0x0 [ 4.248034] pnp 00:01: add mem 0xc0000-0xdffff flags 0x0 [ 4.252034] pnp 00:01: add mem 0xe0000-0xfffff flags 0x0 [ 4.256036] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x17c [ 4.264113] device: '00:01': device_add [ 4.268059] bus: 'pnp': add device 00:01 [ 4.272044] PM: Adding info for pnp:00:01 [ 4.276088] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.284640] pnp 00:02: parse allocated resources [ 4.288044] pnp 00:02: add io 0x0-0xf flags 0x1 [ 4.292034] pnp 00:02: add io 0x81-0x83 flags 0x1 [ 4.300034] pnp 00:02: add io 0x87-0x87 flags 0x1 [ 4.304034] pnp 00:02: add io 0x89-0x8b flags 0x1 [ 4.308034] pnp 00:02: add io 0x8f-0x8f flags 0x1 [ 4.312034] pnp 00:02: add io 0xc0-0xdf flags 0x1 [ 4.320034] pnp 00:02: add dma 4 flags 0x0 [ 4.324035] device: '00:02': device_add [ 4.328060] bus: 'pnp': add device 00:02 [ 4.332059] PM: Adding info for pnp:00:02 [ 4.336088] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 4.341776] pnp 00:03: parse allocated resources [ 4.344044] pnp 00:03: add io 0x70-0x71 flags 0x1 [ 4.352034] pnp 00:03: add io 0x74-0x77 flags 0x1 [ 4.356037] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 4.364037] pnp 00:03: add irq 8 flags 0x1 [ 4.368036] device: '00:03': device_add [ 4.371920] bus: 'pnp': add device 00:03 [ 4.376044] PM: Adding info for pnp:00:03 [ 4.380088] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 4.385784] pnp 00:04: parse allocated resources [ 4.392044] pnp 00:04: add io 0xf0-0xf0 flags 0x1 [ 4.396035] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 4.404036] pnp 00:04: add irq 13 flags 0x1 [ 4.408036] device: '00:04': device_add [ 4.412062] bus: 'pnp': add device 00:04 [ 4.416008] PM: Adding info for pnp:00:04 [ 4.420088] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 4.425784] pnp 00:05: parse allocated resources [ 4.432043] pnp 00:05: add io 0x61-0x61 flags 0x1 [ 4.436036] device: '00:05': device_add [ 4.440064] bus: 'pnp': add device 00:05 [ 4.444050] PM: Adding info for pnp:00:05 [ 4.448088] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 4.453774] pnp 00:06: parse allocated resources [ 4.460046] pnp 00:06: add io 0x500-0x53f flags 0x1 [ 4.464040] pnp 00:06: add io 0x400-0x47f flags 0x1 [ 4.468034] pnp 00:06: add io 0x92-0x92 flags 0x1 [ 4.476034] pnp 00:06: add io 0x680-0x6ff flags 0x1 [ 4.480034] pnp 00:06: add io 0x10-0x1f flags 0x1 [ 4.484034] pnp 00:06: add io 0x72-0x73 flags 0x1 [ 4.488034] pnp 00:06: add io 0x80-0x80 flags 0x1 [ 4.496034] pnp 00:06: add io 0x84-0x86 flags 0x1 [ 4.500035] pnp 00:06: add io 0x88-0x88 flags 0x1 [ 4.504034] pnp 00:06: add io 0x8c-0x8e flags 0x1 [ 4.508034] pnp 00:06: add io 0x90-0x9f flags 0x1 [ 4.516035] pnp 00:06: PNP0c02: calling quirk_system_pci_resources+0x0/0x17c [ 4.520112] device: '00:06': device_add [ 4.524065] bus: 'pnp': add device 00:06 [ 4.528044] PM: Adding info for pnp:00:06 [ 4.532088] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 4.540401] pnp 00:07: parse allocated resources [ 4.544889] pnp 00:07: add io 0x3f0-0x3f5 flags 0x1 [ 4.552034] pnp 00:07: add io 0x3f0-0x3f0 flags 0x1 [ 4.556035] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 4.564036] pnp 00:07: add irq 6 flags 0x1 [ 4.572034] pnp 00:07: add dma 2 flags 0x0 [ 4.576034] pnp 00:07: parse resource options [ 4.580128] pnp 00:07: dependent set 0 (preferred) io min 0x3f0 max 0x3f0 align 1 size 6 flags 0x1 [ 4.588035] pnp 00:07: dependent set 0 (preferred) io min 0x3f7 max 0x3f7 align 1 size 1 flags 0x1 [ 4.596035] pnp 00:07: dependent set 0 (preferred) irq 6 flags 0x1 [ 4.604034] pnp 00:07: dependent set 0 (preferred) dma 2 (bitmask 0x4) flags 0x0 [ 4.612035] device: '00:07': device_add [ 4.616066] bus: 'pnp': add device 00:07 [ 4.620050] PM: Adding info for pnp:00:07 [ 4.624088] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 4.630200] pnp 00:08: parse allocated resources [ 4.636538] pnp 00:08: add io 0x378-0x37f flags 0x1 [ 4.640034] pnp 00:08: add io 0x778-0x77f flags 0x1 [ 4.648035] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 4.652036] pnp 00:08: add irq 7 flags 0x1 [ 4.656034] pnp 00:08: add dma 0 flags 0x10000000 [ 4.664034] pnp 00:08: parse resource options [ 4.668134] pnp 00:08: dependent set 0 (preferred) io min 0x378 max 0x378 align 1 size 8 flags 0x1 [ 4.676035] pnp 00:08: dependent set 0 (preferred) io min 0x778 max 0x778 align 1 size 8 flags 0x1 [ 4.684041] pnp 00:08: dependent set 0 (preferred) irq 5 7 flags 0x1 [ 4.692035] pnp 00:08: dependent set 0 (preferred) dma 1 3 (bitmask 0xa) flags 0x0 [ 4.700034] pnp 00:08: dependent set 1 (preferred) io min 0x278 max 0x278 align 1 size 8 flags 0x1 [ 4.708034] pnp 00:08: dependent set 1 (preferred) io min 0x678 max 0x678 align 1 size 8 flags 0x1 [ 4.720035] pnp 00:08: dependent set 1 (preferred) irq 5 7 flags 0x1 [ 4.724034] pnp 00:08: dependent set 1 (preferred) dma 1 3 (bitmask 0xa) flags 0x0 [ 4.732034] pnp 00:08: dependent set 2 (preferred) io min 0x3bc max 0x3bc align 1 size 4 flags 0x1 [ 4.740034] pnp 00:08: dependent set 2 (preferred) io min 0x7bc max 0x7bc align 1 size 4 flags 0x1 [ 4.752035] pnp 00:08: dependent set 2 (preferred) irq 5 7 flags 0x1 [ 4.756034] pnp 00:08: dependent set 2 (preferred) dma 1 3 (bitmask 0xa) flags 0x0 [ 4.764036] device: '00:08': device_add [ 4.768067] bus: 'pnp': add device 00:08 [ 4.772044] PM: Adding info for pnp:00:08 [ 4.776089] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active) [ 4.784127] pnp 00:09: parse allocated resources [ 4.788122] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 4.796040] pnp 00:09: add irq 12 flags 0x1 [ 4.800037] device: '00:09': device_add [ 4.804067] bus: 'pnp': add device 00:09 [ 4.808050] PM: Adding info for pnp:00:09 [ 4.812088] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 4.824127] pnp 00:0a: parse allocated resources [ 4.828043] pnp 00:0a: add io 0x60-0x60 flags 0x1 [ 4.832034] pnp 00:0a: add io 0x64-0x64 flags 0x1 [ 4.836034] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 4.844036] pnp 00:0a: add irq 1 flags 0x1 [ 4.848037] device: '00:0a': device_add [ 4.852067] bus: 'pnp': add device 00:0a [ 4.856044] PM: Adding info for pnp:00:0a [ 4.860088] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 4.868194] pnp 00:0b: parse allocated resources [ 4.872544] pnp 00:0b: add io 0x3f8-0x3ff flags 0x1 [ 4.880035] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 4.884036] pnp 00:0b: add irq 4 flags 0x1 [ 4.892034] pnp 00:0b: parse resource options [ 4.896132] pnp 00:0b: dependent set 0 (preferred) io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1 [ 4.904036] pnp 00:0b: dependent set 0 (preferred) irq 4 flags 0x1 [ 4.912034] pnp 00:0b: dependent set 1 (preferred) io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1 [ 4.920035] pnp 00:0b: dependent set 1 (preferred) irq 4 flags 0x1 [ 4.924034] pnp 00:0b: dependent set 2 (preferred) io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1 [ 4.936035] pnp 00:0b: dependent set 2 (preferred) irq 3 flags 0x1 [ 4.940034] pnp 00:0b: dependent set 3 (preferred) io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1 [ 4.952035] pnp 00:0b: dependent set 3 (preferred) irq 3 flags 0x1 [ 4.956040] pnp 00:0b: dependent set 4 (functional) io min 0x100 max 0x3f8 align 8 size 8 flags 0x1 [ 4.968036] pnp 00:0b: dependent set 4 (functional) irq 1 3 4 5 6 7 8 10 11 12 13 14 15 flags 0x1 [ 4.976036] device: '00:0b': device_add [ 4.979922] bus: 'pnp': add device 00:0b [ 4.984044] PM: Adding info for pnp:00:0b [ 4.988087] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 4.993899] pnp 00:0c: parse allocated resources [ 5.000042] pnp 00:0c: add mem 0xfec00000-0xfec000ff flags 0x0 [ 5.004036] device: '00:0c': device_add [ 5.008070] bus: 'pnp': add device 00:0c [ 5.012044] PM: Adding info for pnp:00:0c [ 5.016088] pnp 00:0c: Plug and Play ACPI device, IDs PNP0003 (active) [ 5.024311] pnp: PnP ACPI: found 13 devices [ 5.028034] ACPI: ACPI bus type pnp unregistered [ 5.032034] initcall pnpacpi_init+0x0/0x8c returned 0 after 846 msecs [ 5.038583] calling setup_shutdown_event+0x0/0x14 [ 5.044034] initcall setup_shutdown_event+0x0/0x14 returned 0 after 0 msecs [ 5.050409] calling balloon_init+0x0/0x1c2 [ 5.056037] initcall balloon_init+0x0/0x1c2 returned -19 after 0 msecs [ 5.060033] calling misc_init+0x0/0xa0 [ 5.064041] device class 'misc': registering [ 5.068093] initcall misc_init+0x0/0xa0 returned 0 after 3 msecs [ 5.078412] calling cn_init+0x0/0xf3 [ 5.080076] initcall cn_init+0x0/0xf3 returned 0 after 0 msecs [ 5.088033] calling tifm_init+0x0/0x83 [ 5.092098] bus: 'tifm': registered [ 5.095558] device class 'tifm_adapter': registering [ 5.100092] initcall tifm_init+0x0/0x83 returned 0 after 7 msecs [ 5.106415] calling phy_init+0x0/0x31 [ 5.112100] bus: 'mdio_bus': registered [ 5.116034] bus: 'mdio_bus': add driver Generic PHY [ 5.120097] initcall phy_init+0x0/0x31 returned 0 after 7 msecs [ 5.124033] calling init_dvbdev+0x0/0xc3 [ 5.128036] device class 'dvb': registering [ 5.132091] initcall init_dvbdev+0x0/0xc3 returned 0 after 3 msecs [ 5.140033] calling init_scsi+0x0/0x8c [ 5.144300] device class 'scsi_host': registering [ 5.148101] bus: 'scsi': registered [ 5.152034] device class 'scsi_device': registering [ 5.156090] SCSI subsystem initialized [ 5.160034] initcall init_scsi+0x0/0x8c returned 0 after 15 msecs [ 5.166495] calling ata_init+0x0/0x367 [ 5.172075] libata version 3.00 loaded. [ 5.176034] initcall ata_init+0x0/0x367 returned 0 after 3 msecs [ 5.180033] calling spi_init+0x0/0x83 [ 5.184091] bus: 'spi': registered [ 5.188033] device class 'spi_master': registering [ 5.192090] initcall spi_init+0x0/0x83 returned 0 after 7 msecs [ 5.198411] calling usb_init+0x0/0x113 [ 5.204092] bus: 'usb': registered [ 5.208035] device class 'usb_host': registering [ 5.212090] bus: 'usb': add driver usbfs [ 5.216054] usbcore: registered new interface driver usbfs [ 5.220039] bus: 'usb': add driver hub [ 5.224095] usbcore: registered new interface driver hub [ 5.232068] bus: 'usb': add driver usb [ 5.232093] usbcore: registered new device driver usb [ 5.240034] initcall usb_init+0x0/0x113 returned 0 after 34 msecs [ 5.244033] calling serio_init+0x0/0x98 [ 5.248090] bus: 'serio': registered [ 5.252075] initcall serio_init+0x0/0x98 returned 0 after 3 msecs [ 5.258410] calling gameport_init+0x0/0x99 [ 5.264091] bus: 'gameport': registered [ 5.268068] initcall gameport_init+0x0/0x99 returned 0 after 3 msecs [ 5.272033] calling input_init+0x0/0x108 [ 5.276033] device class 'input': registering [ 5.284099] initcall input_init+0x0/0x108 returned 0 after 7 msecs [ 5.288033] calling rtc_init+0x0/0x65 [ 5.292034] device class 'rtc': registering [ 5.296090] initcall rtc_init+0x0/0x65 returned 0 after 3 msecs [ 5.302411] calling i2c_init+0x0/0x67 [ 5.308100] bus: 'i2c': registered [ 5.308100] device class 'i2c-adapter': registering [ 5.316092] bus: 'i2c': add driver dummy [ 5.320097] i2c-core: driver [dummy] registered [ 5.324038] initcall i2c_init+0x0/0x67 returned 0 after 15 msecs [ 5.328033] calling hwmon_init+0x0/0x42 [ 5.332034] device class 'hwmon': registering [ 5.336091] initcall hwmon_init+0x0/0x42 returned 0 after 3 msecs [ 5.344033] calling thermal_init+0x0/0x58 [ 5.348033] device class 'thermal': registering [ 5.352091] initcall thermal_init+0x0/0x58 returned 0 after 3 msecs [ 5.358412] calling mmc_init+0x0/0x74 [ 5.364091] bus: 'mmc': registered [ 5.368034] device class 'mmc_host': registering [ 5.372097] bus: 'sdio': registered [ 5.376034] initcall mmc_init+0x0/0x74 returned 0 after 11 msecs [ 5.380033] calling leds_init+0x0/0x31 [ 5.384034] device class 'leds': registering [ 5.388090] initcall leds_init+0x0/0x31 returned 0 after 3 msecs [ 5.394411] calling dma_bus_init+0x0/0x33 [ 5.400033] device class 'dma': registering [ 5.404090] initcall dma_bus_init+0x0/0x33 returned 0 after 3 msecs [ 5.408033] calling ac97_bus_init+0x0/0x12 [ 5.412091] bus: 'ac97': registered [ 5.416034] initcall ac97_bus_init+0x0/0x12 returned 0 after 3 msecs [ 5.424034] calling pci_subsys_init+0x0/0x131 [ 5.428033] PCI: Using ACPI for IRQ routing [ 5.432242] initcall pci_subsys_init+0x0/0x131 returned 0 after 3 msecs [ 5.440034] calling proto_init+0x0/0x2e [ 5.444039] initcall proto_init+0x0/0x2e returned 0 after 0 msecs [ 5.448034] calling net_dev_init+0x0/0x1f1 [ 5.452051] device class 'net': registering [ 5.460074] initcall net_dev_init+0x0/0x1f1 returned 0 after 7 msecs [ 5.464033] calling neigh_init+0x0/0x71 [ 5.468034] initcall neigh_init+0x0/0x71 returned 0 after 0 msecs [ 5.474410] calling fib_rules_init+0x0/0xa6 [ 5.480035] initcall fib_rules_init+0x0/0xa6 returned 0 after 0 msecs [ 5.484033] calling pktsched_init+0x0/0xc4 [ 5.488042] initcall pktsched_init+0x0/0xc4 returned 0 after 0 msecs [ 5.496033] calling tc_filter_init+0x0/0x4c [ 5.500035] initcall tc_filter_init+0x0/0x4c returned 0 after 0 msecs [ 5.506410] calling genl_init+0x0/0xd8 [ 5.524074] initcall genl_init+0x0/0xd8 returned 0 after 11 msecs [ 5.528034] calling cipso_v4_init+0x0/0x88 [ 5.532042] initcall cipso_v4_init+0x0/0x88 returned 0 after 0 msecs [ 5.540033] calling wanrouter_init+0x0/0x55 [ 5.544033] Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc. [ 5.552046] initcall wanrouter_init+0x0/0x55 returned 0 after 7 msecs [ 5.558410] calling irda_init+0x0/0x92 [ 5.564073] NET: Registered protocol family 23 [ 5.568087] initcall irda_init+0x0/0x92 returned 0 after 3 msecs [ 5.572033] calling bt_init+0x0/0x5d [ 5.576033] Bluetooth: Core ver 2.13 [ 5.580082] device class 'bluetooth': registering [ 5.588092] NET: Registered protocol family 31 [ 5.592033] Bluetooth: HCI device and connection manager initialized [ 5.596040] Bluetooth: HCI socket layer initialized [ 5.604033] initcall bt_init+0x0/0x5d returned 0 after 26 msecs [ 5.608033] calling wireless_nlevent_init+0x0/0x41 [ 5.612033] initcall wireless_nlevent_init+0x0/0x41 returned 0 after 0 msecs [ 5.620034] calling cfg80211_init+0x0/0x4d [ 5.624033] device class 'ieee80211': registering [ 5.628091] initcall cfg80211_init+0x0/0x4d returned 0 after 3 msecs [ 5.636033] calling ieee80211_init+0x0/0x1f [ 5.640040] initcall ieee80211_init+0x0/0x1f returned 0 after 0 msecs [ 5.646410] calling netlbl_init+0x0/0x83 [ 5.652033] NetLabel: Initializing [ 5.656032] NetLabel: domain hash size = 128 [ 5.660032] NetLabel: protocols = UNLABELED CIPSOv4 [ 5.664101] NetLabel: unlabeled traffic allowed by default [ 5.668034] initcall netlbl_init+0x0/0x83 returned 0 after 15 msecs [ 5.676033] calling rfkill_init+0x0/0x72 [ 5.680033] device class 'rfkill': registering [ 5.684090] initcall rfkill_init+0x0/0x72 returned 0 after 3 msecs [ 5.690410] calling sysctl_init+0x0/0x49 [ 5.696034] initcall sysctl_init+0x0/0x49 returned 0 after 0 msecs [ 5.704035] calling pci_iommu_init+0x0/0x1c [ 5.708102] PCI-GART: No AMD northbridge found. [ 5.712034] initcall pci_iommu_init+0x0/0x1c returned 0 after 3 msecs [ 5.718410] calling print_all_ICs+0x0/0x4b9 [ 5.724033] [ 5.724033] printing PIC contents [ 5.728035] ... PIC IMR: ffff [ 5.731105] ... PIC IRR: 0c00 [ 5.736033] ... PIC ISR: 0000 [ 5.736034] ... PIC ELCR: 0e00 [ 5.740034] [ 5.740034] printing local APIC contents on CPU#0/0: [ 5.744031] ... APIC ID: 00000000 (0) [ 5.744031] ... APIC VERSION: 00050014 [ 5.744031] ... APIC TASKPRI: 00000000 (00) [ 5.744031] ... APIC PROCPRI: 00000000 [ 5.744031] ... APIC LDR: 01000000 [ 5.744031] ... APIC DFR: ffffffff [ 5.744031] ... APIC SPIV: 000001ff [ 5.744031] ... APIC ISR field: [ 5.744031] 0123456789abcdef0123456789abcdef [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] ... APIC TMR field: [ 5.744031] 0123456789abcdef0123456789abcdef [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] ... APIC IRR field: [ 5.744031] 0123456789abcdef0123456789abcdef [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000010000000000000000 [ 5.744031] ... APIC ESR: 00000000 [ 5.744031] ... APIC ICR: 00000606 [ 5.744031] ... APIC ICR2: 01000000 [ 5.744031] ... APIC LVTT: 000200ef [ 5.744031] ... APIC LVTPC: 00010000 [ 5.744031] ... APIC LVT0: 00010700 [ 5.744031] ... APIC LVT1: 00000400 [ 5.744031] ... APIC LVTERR: 000000fe [ 5.744031] ... APIC TMICT: 0001046a [ 5.744031] ... APIC TMCCT: 000072ff [ 5.744031] ... APIC TDCR: 00000003 [ 5.744031] [ 5.741516] [ 5.741516] printing local APIC contents on CPU#1/1: [ 5.744031] ... APIC ID: 01000000 (1) [ 5.744031] ... APIC VERSION: 00050014 [ 5.744031] ... APIC TASKPRI: 00000000 (00) [ 5.744031] ... APIC PROCPRI: 00000000 [ 5.744031] ... APIC LDR: 02000000 [ 5.744031] ... APIC DFR: ffffffff [ 5.744031] ... APIC SPIV: 000001ff [ 5.744031] ... APIC ISR field: [ 5.744031] 0123456789abcdef0123456789abcdef [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] ... APIC TMR field: [ 5.744031] 0123456789abcdef0123456789abcdef [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] ... APIC IRR field: [ 5.744031] 0123456789abcdef0123456789abcdef [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000000000000000000000 [ 5.744031] 00000000000000010000000000000000 [ 5.744031] ... APIC ESR: 00000000 [ 5.744031] ... APIC ICR: 000008fb [ 5.744031] ... APIC ICR2: 01000000 [ 5.744031] ... APIC LVTT: 000200ef [ 5.744031] ... APIC LVTPC: 00010000 [ 5.744031] ... APIC LVT0: 00010700 [ 5.744031] ... APIC LVT1: 00010400 [ 5.744031] ... APIC LVTERR: 000000fe [ 5.744031] ... APIC TMICT: 0001046a [ 5.744031] ... APIC TMCCT: 00000de8 [ 5.744031] ... APIC TDCR: 00000003 [ 5.744031] [ 5.972037] number of MP IRQ sources: 15. [ 5.976033] number of IO-APIC #2 registers: 24. [ 5.980033] testing the IO APIC....................... [ 5.984037] [ 5.985548] IO APIC #2...... [ 5.988033] .... register #00: 00000000 [ 5.992033] ....... : physical APIC id: 00 [ 6.000033] ....... : Delivery Type: 0 [ 6.004033] ....... : LTS : 0 [ 6.008033] .... register #01: 00170020 [ 6.012033] ....... : max redirection entries: 0017 [ 6.016033] ....... : PRQ implemented: 0 [ 6.020033] ....... : IO APIC version: 0020 [ 6.024033] .... IRQ redirection table: [ 6.028033] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 6.032035] 00 000 1 0 0 0 0 0 0 00 [ 6.039278] 01 003 0 0 0 0 0 1 1 31 [ 6.044035] 02 003 0 0 0 0 0 1 1 30 [ 6.048035] 03 003 0 0 0 0 0 1 1 33 [ 6.055278] 04 003 0 0 0 0 0 1 1 34 [ 6.060035] 05 003 0 0 0 0 0 1 1 35 [ 6.064035] 06 003 0 0 0 0 0 1 1 36 [ 6.071278] 07 003 0 0 0 0 0 1 1 37 [ 6.076035] 08 003 0 0 0 0 0 1 1 38 [ 6.080035] 09 003 0 1 0 0 0 1 1 39 [ 6.088035] 0a 003 0 0 0 0 0 1 1 3A [ 6.092035] 0b 003 0 0 0 0 0 1 1 3B [ 6.096035] 0c 003 0 0 0 0 0 1 1 3C [ 6.104035] 0d 003 0 0 0 0 0 1 1 3D [ 6.108035] 0e 003 0 0 0 0 0 1 1 3E [ 6.112035] 0f 003 0 0 0 0 0 1 1 3F [ 6.120035] 10 000 1 0 0 0 0 0 0 00 [ 6.124033] 11 000 1 0 0 0 0 0 0 00 [ 6.128038] 12 000 1 0 0 0 0 0 0 00 [ 6.132035] 13 000 1 0 0 0 0 0 0 00 [ 6.139277] 14 000 1 0 0 0 0 0 0 00 [ 6.144035] 15 000 1 0 0 0 0 0 0 00 [ 6.148035] 16 000 1 0 0 0 0 0 0 00 [ 6.155277] 17 000 1 0 0 0 0 0 0 00 [ 6.160033] IRQ to pin mappings: [ 6.164033] IRQ0 -> 0:2 [ 6.166563] IRQ1 -> 0:1 [ 6.168797] IRQ3 -> 0:3 [ 6.171328] IRQ4 -> 0:4 [ 6.172797] IRQ5 -> 0:5 [ 6.176797] IRQ6 -> 0:6 [ 6.179328] IRQ7 -> 0:7 [ 6.180797] IRQ8 -> 0:8 [ 6.184243] IRQ9 -> 0:9 [ 6.186774] IRQ10 -> 0:10 [ 6.188883] IRQ11 -> 0:11 [ 6.192243] IRQ12 -> 0:12 [ 6.194947] IRQ13 -> 0:13 [ 6.196883] IRQ14 -> 0:14 [ 6.200243] IRQ15 -> 0:15 [ 6.202948] .................................... done. [ 6.208033] initcall print_all_ICs+0x0/0x4b9 returned 0 after 461 msecs [ 6.214583] calling hpet_late_init+0x0/0x192 [ 6.220036] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 6.224243] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 6.229039] initcall hpet_late_init+0x0/0x192 returned 0 after 11 msecs [ 6.236033] calling init_kmmio+0x0/0x2c [ 6.240039] initcall init_kmmio+0x0/0x2c returned 0 after 0 msecs [ 6.248034] calling clocksource_done_booting+0x0/0x12 [ 6.252033] initcall clocksource_done_booting+0x0/0x12<6>Switched to NOHz mode on CPU #0 [ 6.262678] Switched to NOHz mode on CPU #1 [ 6.266876] returned 0 after 0 msecs [ 6.273112] calling tracer_alloc_buffers+0x0/0x4e4 [ 6.279818] tracer: 357 pages allocated for 16384 entries of 88 bytes [ 6.286269] actual entries 16422 [ 6.289878] initcall tracer_alloc_buffers+0x0/0x4e4 returned 0 after 11 msecs [ 6.297058] calling init_pipe_fs+0x0/0x4c [ 6.301211] initcall init_pipe_fs+0x0/0x4c returned 0 after 0 msecs [ 6.307523] calling init_mnt_writers+0x0/0x87 [ 6.311983] initcall init_mnt_writers+0x0/0x87 returned 0 after 0 msecs [ 6.318642] calling eventpoll_init+0x0/0x95 [ 6.322942] initcall eventpoll_init+0x0/0x95 returned 0 after 0 msecs [ 6.329431] calling anon_inode_init+0x0/0x115 [ 6.333909] initcall anon_inode_init+0x0/0x115 returned 0 after 0 msecs [ 6.340572] calling pcie_aspm_init+0x0/0x22 [ 6.347314] initcall pcie_aspm_init+0x0/0x22 returned 0 after 2 msecs [ 6.353806] calling acpi_event_init+0x0/0x80 [ 6.372081] initcall acpi_event_init+0x0/0x80 returned 0 after 13 msecs [ 6.378744] calling pnp_system_init+0x0/0x12 [ 6.383117] pnp: the driver 'system' has been registered [ 6.388441] bus: 'pnp': add driver system [ 6.394762] bus: 'pnp': driver_probe_device: matched device 00:01 with driver system [ 6.402517] bus: 'pnp': really_probe: probing driver system with device 00:01 [ 6.409680] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved [ 6.416826] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved [ 6.423972] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 6.431118] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 6.438263] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 6.445407] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 6.452551] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 6.459704] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved [ 6.466849] system 00:01: iomem range 0xc0000-0xdffff has been reserved [ 6.473476] system 00:01: iomem range 0xe0000-0xfffff could not be reserved [ 6.480447] system 00:01: driver attached [ 6.484475] driver: '00:01': driver_bound: bound to device 'system' [ 6.490754] bus: 'pnp': really_probe: bound device 00:01 to driver system [ 6.497558] bus: 'pnp': driver_probe_device: matched device 00:06 with driver system [ 6.505314] bus: 'pnp': really_probe: probing driver system with device 00:06 [ 6.512464] system 00:06: ioport range 0x500-0x53f has been reserved [ 6.518830] system 00:06: ioport range 0x400-0x47f has been reserved [ 6.525196] system 00:06: ioport range 0x680-0x6ff has been reserved [ 6.531561] system 00:06: driver attached [ 6.535585] driver: '00:06': driver_bound: bound to device 'system' [ 6.541864] bus: 'pnp': really_probe: bound device 00:06 to driver system [ 6.548771] initcall pnp_system_init+0x0/0x12 returned 0 after 157 msecs [ 6.555517] calling chr_dev_init+0x0/0xb4 [ 6.559650] device class 'mem': registering [ 6.563946] device: 'mem': device_add [ 6.567651] PM: Adding info for No Bus:mem [ 6.571872] device: 'null': device_add [ 6.575656] PM: Adding info for No Bus:null [ 6.579948] device: 'port': device_add [ 6.583731] PM: Adding info for No Bus:port [ 6.588025] device: 'zero': device_add [ 6.591812] PM: Adding info for No Bus:zero [ 6.596105] device: 'full': device_add [ 6.599885] PM: Adding info for No Bus:full [ 6.604177] device: 'random': device_add [ 6.608134] PM: Adding info for No Bus:random [ 6.612599] device: 'urandom': device_add [ 6.616643] PM: Adding info for No Bus:urandom [ 6.621195] device: 'kmsg': device_add [ 6.624986] PM: Adding info for No Bus:kmsg [ 6.629278] device: 'oldmem': device_add [ 6.633236] PM: Adding info for No Bus:oldmem [ 6.637699] initcall chr_dev_init+0x0/0xb4 returned 0 after 74 msecs [ 6.644102] calling firmware_class_init+0x0/0x79 [ 6.648819] device class 'firmware': registering [ 6.653547] initcall firmware_class_init+0x0/0x79 returned 0 after 4 msecs [ 6.660471] calling loopback_init+0x0/0x12 [ 6.664685] device: 'lo': device_add [ 6.668366] PM: Adding info for No Bus:lo [ 6.672505] initcall loopback_init+0x0/0x12 returned 0 after 7 msecs [ 6.678905] calling init_acpi_pm_clocksource+0x0/0xba [ 6.684080] initcall init_acpi_pm_clocksource+0x0/0xba returned 0 after 0 msecs [ 6.691437] calling ssb_modinit+0x0/0x4a [ 6.695580] bus: 'ssb': registered [ 6.699007] initcall ssb_modinit+0x0/0x4a returned 0 after 3 msecs [ 6.705235] calling pcibios_assign_resources+0x0/0x88 [ 6.710475] pci 0000:01:00.0: BAR 6: got res [0x50320000-0x5033ffff] bus [0x50320000-0x5033ffff] flags 0x27200 [ 6.720485] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 6.726417] pci 0000:00:01.0: IO window: 0x3000-0x3fff [ 6.731743] pci 0000:00:01.0: MEM window: 0x50300000-0x503fffff [ 6.737850] pci 0000:00:01.0: PREFETCH window: 0x00000040000000-0x0000004fffffff [ 6.745436] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 6.751367] pci 0000:00:1c.0: IO window: disabled [ 6.756262] pci 0000:00:1c.0: MEM window: 0x50200000-0x502fffff [ 6.762368] pci 0000:00:1c.0: PREFETCH window: disabled [ 6.767785] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 6.773715] pci 0000:00:1c.4: IO window: disabled [ 6.778609] pci 0000:00:1c.4: MEM window: disabled [ 6.783590] pci 0000:00:1c.4: PREFETCH window: disabled [ 6.789007] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 [ 6.794939] pci 0000:00:1c.5: IO window: 0x2000-0x2fff [ 6.800266] pci 0000:00:1c.5: MEM window: 0x50100000-0x501fffff [ 6.806373] pci 0000:00:1c.5: PREFETCH window: disabled [ 6.811789] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 6.817722] pci 0000:00:1e.0: IO window: 0x1000-0x1fff [ 6.823051] pci 0000:00:1e.0: MEM window: 0x50000000-0x500fffff [ 6.829158] pci 0000:00:1e.0: PREFETCH window: disabled [ 6.834585] found new irq_cfg for irq 16 [ 6.838524] 0 add_pin_to_irq: irq 16 --> apic 0 pin 16 [ 6.843764] IOAPIC[0]: Set routing entry (2-16 -> 0x49 -> IRQ 16 Mode:1 Active:1) [ 6.851260] found new irq_desc for irq 16 [ 6.855286] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.861999] pci 0000:00:01.0: setting latency timer to 64 [ 6.867418] found new irq_cfg for irq 17 [ 6.871357] 0 add_pin_to_irq: irq 17 --> apic 0 pin 17 [ 6.876597] IOAPIC[0]: Set routing entry (2-17 -> 0x51 -> IRQ 17 Mode:1 Active:1) [ 6.884092] found new irq_desc for irq 17 [ 6.888117] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.894831] pci 0000:00:1c.0: setting latency timer to 64 [ 6.900249] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.909262] pci 0000:00:1c.4: setting latency timer to 64 [ 6.914679] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 6.921393] pci 0000:00:1c.5: setting latency timer to 64 [ 6.926810] pci 0000:00:1e.0: setting latency timer to 64 [ 6.932224] bus: 00 index 0 io port: [0, ffff] [ 6.936682] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 6.941920] bus: 01 index 0 io port: [3000, 3fff] [ 6.946637] bus: 01 index 1 mmio: [50300000, 503fffff] [ 6.951789] bus: 01 index 2 mmio: [40000000, 4fffffff] [ 6.956941] bus: 01 index 3 mmio: [0, 0] [ 6.960880] bus: 02 index 0 mmio: [0, 0] [ 6.964818] bus: 02 index 1 mmio: [50200000, 502fffff] [ 6.969970] bus: 02 index 2 mmio: [0, 0] [ 6.973909] bus: 02 index 3 mmio: [0, 0] [ 6.977848] bus: 03 index 0 mmio: [0, 0] [ 6.981786] bus: 03 index 1 mmio: [0, 0] [ 6.985725] bus: 03 index 2 mmio: [0, 0] [ 6.989663] bus: 03 index 3 mmio: [0, 0] [ 6.993602] bus: 04 index 0 io port: [2000, 2fff] [ 6.998321] bus: 04 index 1 mmio: [50100000, 501fffff] [ 7.003477] bus: 04 index 2 mmio: [0, 0] [ 7.007416] bus: 04 index 3 mmio: [0, 0] [ 7.011355] bus: 05 index 0 io port: [1000, 1fff] [ 7.016074] bus: 05 index 1 mmio: [50000000, 500fffff] [ 7.021227] bus: 05 index 2 mmio: [0, 0] [ 7.025166] bus: 05 index 3 io port: [0, ffff] [ 7.029623] bus: 05 index 4 mmio: [0, ffffffffffffffff] [ 7.034863] initcall pcibios_assign_resources+0x0/0x88 returned 0 after 309 msecs [ 7.042395] calling inet_init+0x0/0x1e9 [ 7.046360] NET: Registered protocol family 2 [ 7.096341] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 7.104415] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 7.113943] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes) [ 7.123184] TCP: Hash tables configured (established 131072 bind 65536) [ 7.129856] TCP reno registered [ 7.148494] initcall inet_init+0x0/0x1e9 returned 0 after 97 msecs [ 7.154727] calling af_unix_init+0x0/0x55 [ 7.158849] NET: Registered protocol family 1 [ 7.163233] initcall af_unix_init+0x0/0x55 returned 0 after 4 msecs [ 7.169549] calling populate_rootfs+0x0/0x233 [ 7.174469] initcall populate_rootfs+0x0/0x233 returned 0 after 0 msecs [ 7.181135] calling calgary_fixup_tce_spaces+0x0/0xf0 [ 7.186287] initcall calgary_fixup_tce_spaces+0x0/0xf0 returned -19 after 0 msecs [ 7.193821] calling pci_init+0x0/0x3a [ 7.197595] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x17f [ 7.203994] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x20 [ 7.210310] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.216971] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xaa [ 7.222854] pci 0000:00:01.0: calling quirk_e100_interrupt+0x0/0x17f [ 7.229258] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x20 [ 7.235568] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.242229] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xaa [ 7.248114] pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x17f [ 7.254513] pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x20 [ 7.260830] pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.267487] pci 0000:00:1b.0: calling pci_fixup_video+0x0/0xaa [ 7.273371] pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x17f [ 7.279768] pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x20 [ 7.286083] pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.295298] pci 0000:00:1c.0: calling pci_fixup_video+0x0/0xaa [ 7.301181] pci 0000:00:1c.4: calling quirk_e100_interrupt+0x0/0x17f [ 7.307579] pci 0000:00:1c.4: calling quirk_cardbus_legacy+0x0/0x20 [ 7.313894] pci 0000:00:1c.4: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.320554] pci 0000:00:1c.4: calling pci_fixup_video+0x0/0xaa [ 7.326434] pci 0000:00:1c.5: calling quirk_e100_interrupt+0x0/0x17f [ 7.332838] pci 0000:00:1c.5: calling quirk_cardbus_legacy+0x0/0x20 [ 7.339148] pci 0000:00:1c.5: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.345809] pci 0000:00:1c.5: calling pci_fixup_video+0x0/0xaa [ 7.351690] pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x17f [ 7.358092] pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x20 [ 7.364405] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.371067] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f10 [ 7.377605] pci 0000:00:1d.0: Performing full reset [ 7.382507] pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xaa [ 7.388391] pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x17f [ 7.394790] pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x20 [ 7.401105] pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.407765] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 7.414303] pci 0000:00:1d.1: Performing full reset [ 7.419202] pci 0000:00:1d.1: calling pci_fixup_video+0x0/0xaa [ 7.425085] pci 0000:00:1d.2: calling quirk_e100_interrupt+0x0/0x17f [ 7.431485] pci 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x20 [ 7.437800] pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.444465] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 7.451003] pci 0000:00:1d.2: Performing full reset [ 7.455902] pci 0000:00:1d.2: calling pci_fixup_video+0x0/0xaa [ 7.461789] pci 0000:00:1d.3: calling quirk_e100_interrupt+0x0/0x17f [ 7.468192] pci 0000:00:1d.3: calling quirk_cardbus_legacy+0x0/0x20 [ 7.474504] pci 0000:00:1d.3: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.481169] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 [ 7.487706] pci 0000:00:1d.3: Performing full reset [ 7.492605] pci 0000:00:1d.3: calling pci_fixup_video+0x0/0xaa [ 7.498489] pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x17f [ 7.504896] pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x20 [ 7.511207] pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.517999] pci 0000:00:1d.7: calling pci_fixup_video+0x0/0xaa [ 7.523882] pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x17f [ 7.530285] pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x20 [ 7.536600] pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.543258] pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xaa [ 7.549145] pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x17f [ 7.555545] pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x20 [ 7.561860] pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.568522] pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xaa [ 7.574406] pci 0000:00:1f.1: calling quirk_e100_interrupt+0x0/0x17f [ 7.580809] pci 0000:00:1f.1: calling quirk_cardbus_legacy+0x0/0x20 [ 7.587120] pci 0000:00:1f.1: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.593782] pci 0000:00:1f.1: calling pci_fixup_video+0x0/0xaa [ 7.599664] pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x17f [ 7.606067] pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x20 [ 7.612381] pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.619040] pci 0000:00:1f.2: calling pci_fixup_video+0x0/0xaa [ 7.624926] pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x17f [ 7.631324] pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x20 [ 7.637639] pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.644301] pci 0000:00:1f.3: calling pci_fixup_video+0x0/0xaa [ 7.650183] pci 0000:01:00.0: calling quirk_cardbus_legacy+0x0/0x20 [ 7.656498] pci 0000:01:00.0: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.663157] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xaa [ 7.669040] pci 0000:01:00.0: Boot video device [ 7.673588] pci 0000:01:00.1: calling quirk_cardbus_legacy+0x0/0x20 [ 7.679899] pci 0000:01:00.1: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.686562] pci 0000:01:00.1: calling pci_fixup_video+0x0/0xaa [ 7.692446] pci 0000:02:00.0: calling quirk_cardbus_legacy+0x0/0x20 [ 7.698759] pci 0000:02:00.0: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.705421] pci 0000:02:00.0: calling pci_fixup_video+0x0/0xaa [ 7.711304] pci 0000:04:00.0: calling quirk_e100_interrupt+0x0/0x17f [ 7.717707] pci 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x20 [ 7.724018] pci 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.730680] pci 0000:04:00.0: calling pci_fixup_video+0x0/0xaa [ 7.736564] pci 0000:05:02.0: calling quirk_cardbus_legacy+0x0/0x20 [ 7.742878] pci 0000:05:02.0: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.749541] pci 0000:05:02.0: calling pci_fixup_video+0x0/0xaa [ 7.755422] pci 0000:05:04.0: calling quirk_cardbus_legacy+0x0/0x20 [ 7.761737] pci 0000:05:04.0: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.768402] pci 0000:05:04.0: calling pci_fixup_video+0x0/0xaa [ 7.774287] pci 0000:05:05.0: calling quirk_cardbus_legacy+0x0/0x20 [ 7.780601] pci 0000:05:05.0: calling quirk_usb_early_handoff+0x0/0x3d7 [ 7.787260] pci 0000:05:05.0: calling pci_fixup_video+0x0/0xaa [ 7.793145] initcall pci_init+0x0/0x3a returned 0 after 567 msecs [ 7.799286] calling ehci_hcd_init+0x0/0x8b [ 7.803486] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 [ 7.809515] bus: 'pci': add driver ehci_hcd [ 7.813746] bus: 'pci': driver_probe_device: matched device 0000:00:1d.7 with driver ehci_hcd [ 7.822281] bus: 'pci': really_probe: probing driver ehci_hcd with device 0000:00:1d.7 [ 7.830243] found new irq_cfg for irq 23 [ 7.834183] 0 add_pin_to_irq: irq 23 --> apic 0 pin 23 [ 7.839425] IOAPIC[0]: Set routing entry (2-23 -> 0x59 -> IRQ 23 Mode:1 Active:1) [ 7.846920] found new irq_desc for irq 23 [ 7.850950] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 7.858105] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 7.863951] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 7.869216] device: 'usb_host1': device_add [ 7.873437] PM: Adding info for No Bus:usb_host1 [ 7.878230] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 7.885647] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 [ 7.894619] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 7.902928] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 7.915703] ehci_hcd 0000:00:1d.7: debug port 1 [ 7.920253] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 7.927052] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 7.932844] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50404400 [ 7.938517] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 7.951278] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 7.968060] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.975646] usb usb1: default language 0x0409 [ 7.980047] device: 'usb1': device_add [ 7.983873] bus: 'usb': add device usb1 [ 7.987745] PM: Adding info for usb:usb1 [ 7.991694] usb usb1: uevent [ 7.994686] bus: 'usb': driver_probe_device: matched device usb1 with driver usb [ 8.002095] bus: 'usb': really_probe: probing driver usb with device usb1 [ 8.008898] usb usb1: usb_probe_device [ 8.012664] usb usb1: configuration #1 chosen from 1 choice [ 8.018269] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 8.024028] device: '1-0:1.0': device_add [ 8.028072] bus: 'usb': add device 1-0:1.0 [ 8.032195] PM: Adding info for usb:1-0:1.0 [ 8.036402] usb 1-0:1.0: uevent [ 8.039656] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub [ 8.047325] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0 [ 8.054389] hub 1-0:1.0: usb_probe_interface [ 8.058675] hub 1-0:1.0: usb_probe_interface - got id [ 8.063740] hub 1-0:1.0: USB hub found [ 8.067530] hub 1-0:1.0: 8 ports detected [ 8.071557] hub 1-0:1.0: standalone hub [ 8.075410] hub 1-0:1.0: no power switching (usb 1.0) [ 8.080473] hub 1-0:1.0: individual port over-current protection [ 8.086491] hub 1-0:1.0: power on to power good time: 20ms [ 8.092009] hub 1-0:1.0: local power source is good [ 8.096902] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 8.204151] driver: '1-0:1.0': driver_bound: bound to device 'hub' [ 8.204157] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 [ 8.215848] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub [ 8.222564] device class 'usb_endpoint': registering [ 8.227674] device: 'usbdev1.1_ep81': device_add [ 8.232352] PM: Adding info for No Bus:usbdev1.1_ep81 [ 8.237527] driver: 'usb1': driver_bound: bound to device 'usb' [ 8.243460] bus: 'usb': really_probe: bound device usb1 to driver usb [ 8.249932] device: 'usbdev1.1_ep00': device_add [ 8.254612] PM: Adding info for No Bus:usbdev1.1_ep00 [ 8.259778] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.266578] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.273813] usb usb1: Product: EHCI Host Controller [ 8.278706] usb usb1: Manufacturer: Linux 2.6.27-rc6-tip-00189-gafeef79-dirty ehci_hcd [ 8.286634] usb usb1: SerialNumber: 0000:00:1d.7 [ 8.291268] driver: '0000:00:1d.7': driver_bound: bound to device 'ehci_hcd' [ 8.298327] bus: 'pci': really_probe: bound device 0000:00:1d.7 to driver ehci_hcd [ 8.306024] initcall ehci_hcd_init+0x0/0x8b returned 0 after 479 msecs [ 8.312601] calling ohci_hcd_mod_init+0x0/0xa4 [ 8.317147] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.324642] ohci_hcd: block sizes: ed 80 td 96 [ 8.329107] bus: 'pci': add driver ohci_hcd [ 8.333438] initcall ohci_hcd_mod_init+0x0/0xa4 returned 0 after 15 msecs [ 8.340274] calling uhci_hcd_init+0x0/0xec [ 8.344472] USB Universal Host Controller Interface driver v3.0 [ 8.350421] bus: 'pci': add driver uhci_hcd [ 8.354633] bus: 'pci': driver_probe_device: matched device 0000:00:1d.0 with driver uhci_hcd [ 8.363172] bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:1d.0 [ 8.371114] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.378265] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8.386667] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 8.391917] device: 'usb_host2': device_add [ 8.396146] PM: Adding info for No Bus:usb_host2 [ 8.400874] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 8.408290] uhci_hcd 0000:00:1d.0: detected 2 ports [ 8.413184] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 8.419894] uhci_hcd 0000:00:1d.0: Performing full reset [ 8.425231] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 8.431000] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 [ 8.436832] usb usb2: default language 0x0409 [ 8.441233] device: 'usb2': device_add [ 8.445055] bus: 'usb': add device usb2 [ 8.448920] PM: Adding info for usb:usb2 [ 8.452867] usb usb2: uevent [ 8.455853] bus: 'usb': driver_probe_device: matched device usb2 with driver usb [ 8.463262] bus: 'usb': really_probe: probing driver usb with device usb2 [ 8.470064] usb usb2: usb_probe_device [ 8.473832] usb usb2: configuration #1 chosen from 1 choice [ 8.479426] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 8.485185] device: '2-0:1.0': device_add [ 8.489228] bus: 'usb': add device 2-0:1.0 [ 8.493367] PM: Adding info for usb:2-0:1.0 [ 8.497574] usb 2-0:1.0: uevent [ 8.500821] bus: 'usb': driver_probe_device: matched device 2-0:1.0 with driver hub [ 8.508490] bus: 'usb': really_probe: probing driver hub with device 2-0:1.0 [ 8.515552] hub 2-0:1.0: usb_probe_interface [ 8.519838] hub 2-0:1.0: usb_probe_interface - got id [ 8.524902] hub 2-0:1.0: USB hub found [ 8.528693] hub 2-0:1.0: 2 ports detected [ 8.532721] hub 2-0:1.0: standalone hub [ 8.536573] hub 2-0:1.0: no power switching (usb 1.0) [ 8.541637] hub 2-0:1.0: individual port over-current protection [ 8.547655] hub 2-0:1.0: power on to power good time: 2ms [ 8.553081] hub 2-0:1.0: local power source is good [ 8.557974] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 8.668086] driver: '2-0:1.0': driver_bound: bound to device 'hub' [ 8.668093] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 8.679783] bus: 'usb': really_probe: bound device 2-0:1.0 to driver hub [ 8.686500] device: 'usbdev2.1_ep81': device_add [ 8.691176] PM: Adding info for No Bus:usbdev2.1_ep81 [ 8.696342] driver: 'usb2': driver_bound: bound to device 'usb' [ 8.702274] bus: 'usb': really_probe: bound device usb2 to driver usb [ 8.708752] device: 'usbdev2.1_ep00': device_add [ 8.713420] PM: Adding info for No Bus:usbdev2.1_ep00 [ 8.718582] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.725381] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.732615] usb usb2: Product: UHCI Host Controller [ 8.737507] usb usb2: Manufacturer: Linux 2.6.27-rc6-tip-00189-gafeef79-dirty uhci_hcd [ 8.745436] usb usb2: SerialNumber: 0000:00:1d.0 [ 8.750078] driver: '0000:00:1d.0': driver_bound: bound to device 'uhci_hcd' [ 8.757135] bus: 'pci': really_probe: bound device 0000:00:1d.0 to driver uhci_hcd [ 8.764718] bus: 'pci': driver_probe_device: matched device 0000:00:1d.1 with driver uhci_hcd [ 8.773251] bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:1d.1 [ 8.781189] found new irq_cfg for irq 19 [ 8.785128] 0 add_pin_to_irq: irq 19 --> apic 0 pin 19 [ 8.790368] IOAPIC[0]: Set routing entry (2-19 -> 0x61 -> IRQ 19 Mode:1 Active:1) [ 8.797862] found new irq_desc for irq 19 [ 8.801890] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 8.809040] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8.814886] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 8.820136] device: 'usb_host3': device_add [ 8.824363] PM: Adding info for No Bus:usb_host3 [ 8.829090] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 8.836513] uhci_hcd 0000:00:1d.1: detected 2 ports [ 8.841408] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 8.848118] uhci_hcd 0000:00:1d.1: Performing full reset [ 8.853455] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 8.859238] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 [ 8.865065] usb usb3: default language 0x0409 [ 8.869466] device: 'usb3': device_add [ 8.873289] bus: 'usb': add device usb3 [ 8.877154] PM: Adding info for usb:usb3 [ 8.881101] usb usb3: uevent [ 8.884084] bus: 'usb': driver_probe_device: matched device usb3 with driver usb [ 8.891493] bus: 'usb': really_probe: probing driver usb with device usb3 [ 8.898296] usb usb3: usb_probe_device [ 8.902061] usb usb3: configuration #1 chosen from 1 choice [ 8.907657] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 8.913416] device: '3-0:1.0': device_add [ 8.917460] bus: 'usb': add device 3-0:1.0 [ 8.921590] PM: Adding info for usb:3-0:1.0 [ 8.925797] usb 3-0:1.0: uevent [ 8.929044] bus: 'usb': driver_probe_device: matched device 3-0:1.0 with driver hub [ 8.936714] bus: 'usb': really_probe: probing driver hub with device 3-0:1.0 [ 8.943775] hub 3-0:1.0: usb_probe_interface [ 8.948061] hub 3-0:1.0: usb_probe_interface - got id [ 8.953126] hub 3-0:1.0: USB hub found [ 8.956904] hub 3-0:1.0: 2 ports detected [ 8.960929] hub 3-0:1.0: standalone hub [ 8.964781] hub 3-0:1.0: no power switching (usb 1.0) [ 8.969845] hub 3-0:1.0: individual port over-current protection [ 8.975864] hub 3-0:1.0: power on to power good time: 2ms [ 8.981288] hub 3-0:1.0: local power source is good [ 8.986182] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 9.096068] driver: '3-0:1.0': driver_bound: bound to device 'hub' [ 9.096074] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 9.107763] bus: 'usb': really_probe: bound device 3-0:1.0 to driver hub [ 9.114481] device: 'usbdev3.1_ep81': device_add [ 9.119165] PM: Adding info for No Bus:usbdev3.1_ep81 [ 9.124331] driver: 'usb3': driver_bound: bound to device 'usb' [ 9.130264] bus: 'usb': really_probe: bound device usb3 to driver usb [ 9.136747] device: 'usbdev3.1_ep00': device_add [ 9.141416] PM: Adding info for No Bus:usbdev3.1_ep00 [ 9.146579] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.153379] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.160613] usb usb3: Product: UHCI Host Controller [ 9.165504] usb usb3: Manufacturer: Linux 2.6.27-rc6-tip-00189-gafeef79-dirty uhci_hcd [ 9.173430] usb usb3: SerialNumber: 0000:00:1d.1 [ 9.178071] driver: '0000:00:1d.1': driver_bound: bound to device 'uhci_hcd' [ 9.185128] bus: 'pci': really_probe: bound device 0000:00:1d.1 to driver uhci_hcd [ 9.192712] bus: 'pci': driver_probe_device: matched device 0000:00:1d.2 with driver uhci_hcd [ 9.201246] bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:1d.2 [ 9.209184] found new irq_cfg for irq 18 [ 9.213123] 0 add_pin_to_irq: irq 18 --> apic 0 pin 18 [ 9.218363] IOAPIC[0]: Set routing entry (2-18 -> 0x69 -> IRQ 18 Mode:1 Active:1) [ 9.225859] found new irq_desc for irq 18 [ 9.229887] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 9.237037] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 9.242884] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 9.248152] device: 'usb_host4': device_add [ 9.252381] PM: Adding info for No Bus:usb_host4 [ 9.257109] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 9.264541] uhci_hcd 0000:00:1d.2: detected 2 ports [ 9.269436] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 9.276147] uhci_hcd 0000:00:1d.2: Performing full reset [ 9.281481] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 9.287264] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 [ 9.293088] usb usb4: default language 0x0409 [ 9.297486] device: 'usb4': device_add [ 9.301307] bus: 'usb': add device usb4 [ 9.305173] PM: Adding info for usb:usb4 [ 9.309120] usb usb4: uevent [ 9.312106] bus: 'usb': driver_probe_device: matched device usb4 with driver usb [ 9.319516] bus: 'usb': really_probe: probing driver usb with device usb4 [ 9.326328] usb usb4: usb_probe_device [ 9.330107] usb usb4: configuration #1 chosen from 1 choice [ 9.335705] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 9.341465] device: '4-0:1.0': device_add [ 9.345509] bus: 'usb': add device 4-0:1.0 [ 9.349639] PM: Adding info for usb:4-0:1.0 [ 9.353846] usb 4-0:1.0: uevent [ 9.357091] bus: 'usb': driver_probe_device: matched device 4-0:1.0 with driver hub [ 9.364761] bus: 'usb': really_probe: probing driver hub with device 4-0:1.0 [ 9.371822] hub 4-0:1.0: usb_probe_interface [ 9.376109] hub 4-0:1.0: usb_probe_interface - got id [ 9.381174] hub 4-0:1.0: USB hub found [ 9.384953] hub 4-0:1.0: 2 ports detected [ 9.388979] hub 4-0:1.0: standalone hub [ 9.392832] hub 4-0:1.0: no power switching (usb 1.0) [ 9.397897] hub 4-0:1.0: individual port over-current protection [ 9.403915] hub 4-0:1.0: power on to power good time: 2ms [ 9.409341] hub 4-0:1.0: local power source is good [ 9.414233] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 9.524070] driver: '4-0:1.0': driver_bound: bound to device 'hub' [ 9.524076] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 9.535765] bus: 'usb': really_probe: bound device 4-0:1.0 to driver hub [ 9.542483] device: 'usbdev4.1_ep81': device_add [ 9.547150] PM: Adding info for No Bus:usbdev4.1_ep81 [ 9.552323] driver: 'usb4': driver_bound: bound to device 'usb' [ 9.560810] bus: 'usb': really_probe: bound device usb4 to driver usb [ 9.567287] device: 'usbdev4.1_ep00': device_add [ 9.571955] PM: Adding info for No Bus:usbdev4.1_ep00 [ 9.577132] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.583931] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.591166] usb usb4: Product: UHCI Host Controller [ 9.596059] usb usb4: Manufacturer: Linux 2.6.27-rc6-tip-00189-gafeef79-dirty uhci_hcd [ 9.603986] usb usb4: SerialNumber: 0000:00:1d.2 [ 9.608627] driver: '0000:00:1d.2': driver_bound: bound to device 'uhci_hcd' [ 9.615685] bus: 'pci': really_probe: bound device 0000:00:1d.2 to driver uhci_hcd [ 9.623268] bus: 'pci': driver_probe_device: matched device 0000:00:1d.3 with driver uhci_hcd [ 9.631802] bus: 'pci': really_probe: probing driver uhci_hcd with device 0000:00:1d.3 [ 9.639741] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 9.646892] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 9.652739] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 9.657989] device: 'usb_host5': device_add [ 9.662213] PM: Adding info for No Bus:usb_host5 [ 9.666940] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 9.674356] uhci_hcd 0000:00:1d.3: detected 2 ports [ 9.679251] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 [ 9.685966] uhci_hcd 0000:00:1d.3: Performing full reset [ 9.691300] uhci_hcd 0000:00:1d.3: supports USB remote wakeup [ 9.697092] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020 [ 9.702919] usb usb5: default language 0x0409 [ 9.707321] device: 'usb5': device_add [ 9.711143] bus: 'usb': add device usb5 [ 9.715009] PM: Adding info for usb:usb5 [ 9.718956] usb usb5: uevent [ 9.721943] bus: 'usb': driver_probe_device: matched device usb5 with driver usb [ 9.729354] bus: 'usb': really_probe: probing driver usb with device usb5 [ 9.736157] usb usb5: usb_probe_device [ 9.739923] usb usb5: configuration #1 chosen from 1 choice [ 9.745519] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 9.751278] device: '5-0:1.0': device_add [ 9.755320] bus: 'usb': add device 5-0:1.0 [ 9.759450] PM: Adding info for usb:5-0:1.0 [ 9.763658] usb 5-0:1.0: uevent [ 9.766905] bus: 'usb': driver_probe_device: matched device 5-0:1.0 with driver hub [ 9.774575] bus: 'usb': really_probe: probing driver hub with device 5-0:1.0 [ 9.781638] hub 5-0:1.0: usb_probe_interface [ 9.785924] hub 5-0:1.0: usb_probe_interface - got id [ 9.790989] hub 5-0:1.0: USB hub found [ 9.794767] hub 5-0:1.0: 2 ports detected [ 9.798793] hub 5-0:1.0: standalone hub [ 9.802646] hub 5-0:1.0: no power switching (usb 1.0) [ 9.807710] hub 5-0:1.0: individual port over-current protection [ 9.813726] hub 5-0:1.0: power on to power good time: 2ms [ 9.819150] hub 5-0:1.0: local power source is good [ 9.824042] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 9.830932] usb usb2: suspend_rh (auto-stop) [ 9.936082] driver: '5-0:1.0': driver_bound: bound to device 'hub' [ 9.936088] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 9.947777] bus: 'usb': really_probe: bound device 5-0:1.0 to driver hub [ 9.954493] device: 'usbdev5.1_ep81': device_add [ 9.959160] PM: Adding info for No Bus:usbdev5.1_ep81 [ 9.964326] driver: 'usb5': driver_bound: bound to device 'usb' [ 9.970260] bus: 'usb': really_probe: bound device usb5 to driver usb [ 9.976729] device: 'usbdev5.1_ep00': device_add [ 9.981410] PM: Adding info for No Bus:usbdev5.1_ep00 [ 9.986573] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.993373] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.000607] usb usb5: Product: UHCI Host Controller [ 10.005498] usb usb5: Manufacturer: Linux 2.6.27-rc6-tip-00189-gafeef79-dirty uhci_hcd [ 10.013425] usb usb5: SerialNumber: 0000:00:1d.3 [ 10.018066] driver: '0000:00:1d.3': driver_bound: bound to device 'uhci_hcd' [ 10.025123] bus: 'pci': really_probe: bound device 0000:00:1d.3 to driver uhci_hcd [ 10.032820] initcall uhci_hcd_init+0x0/0xec returned 0 after 1610 msecs [ 10.039482] calling i8259A_init_sysfs+0x0/0x22 [ 10.044028] Registering sysdev class 'i8259' [ 10.048405] Registering sys device of class 'i8259' [ 10.053301] Registering sys device 'i82590' [ 10.057589] initcall i8259A_init_sysfs+0x0/0x22 returned 0 after 12 msecs [ 10.064424] calling vsyscall_init+0x0/0x6c [ 10.068631] initcall vsyscall_init+0x0/0x6c returned 0 after 0 msecs [ 10.075050] calling sbf_init+0x0/0xd5 [ 10.078816] initcall sbf_init+0x0/0xd5 returned 0 after 0 msecs [ 10.084785] calling i8237A_init_sysfs+0x0/0x22 [ 10.089331] Registering sysdev class 'i8237' [ 10.093710] Registering sys device of class 'i8237' [ 10.098623] Registering sys device 'i82370' [ 10.102911] initcall i8237A_init_sysfs+0x0/0x22 returned 0 after 12 msecs [ 10.109748] calling add_rtc_cmos+0x0/0x1d [ 10.113861] initcall add_rtc_cmos+0x0/0x1d returned 0 after 0 msecs [ 10.120174] calling cache_sysfs_init+0x0/0x5c [ 10.125561] initcall cache_sysfs_init+0x0/0x5c returned 0 after 0 msecs [ 10.132225] calling mce_init_device+0x0/0x78 [ 10.136598] Registering sysdev class 'machinecheck' [ 10.141581] Registering sys device of class 'machinecheck' [ 10.147084] Registering sys device 'machinecheck0' [ 10.151995] Registering sys device of class 'machinecheck' [ 10.157499] Registering sys device 'machinecheck1' [ 10.162427] device: 'mcelog': device_add [ 10.166385] PM: Adding info for No Bus:mcelog [ 10.170855] initcall mce_init_device+0x0/0x78 returned 0 after 32 msecs [ 10.177518] calling periodic_mcheck_init+0x0/0x3f [ 10.182330] initcall periodic_mcheck_init+0x0/0x3f returned 0 after 0 msecs [ 10.189337] calling thermal_throttle_init_device+0x0/0x7f [ 10.194857] initcall thermal_throttle_init_device+0x0/0x7f returned 0 after 0 msecs [ 10.202562] calling threshold_init_device+0x0/0x42 [ 10.207455] initcall threshold_init_device+0x0/0x42 returned 0 after 0 msecs [ 10.214549] calling msr_init+0x0/0xed [ 10.218320] device class 'msr': registering [ 10.222616] device: 'msr0': device_add [ 10.226401] PM: Adding info for No Bus:msr0 [ 10.230698] device: 'msr1': device_add [ 10.234489] PM: Adding info for No Bus:msr1 [ 10.238779] initcall msr_init+0x0/0xed returned 0 after 19 msecs [ 10.244835] calling cpuid_init+0x0/0xed [ 10.248778] device class 'cpuid': registering [ 10.253247] device: 'cpu0': device_add [ 10.257031] PM: Adding info for No Bus:cpu0 [ 10.261328] device: 'cpu1': device_add [ 10.265112] PM: Adding info for No Bus:cpu1 [ 10.269402] initcall cpuid_init+0x0/0xed returned 0 after 19 msecs [ 10.275630] calling microcode_intel_module_init+0x0/0x45 [ 10.281045] device: 'microcode': device_add [ 10.285261] PM: Adding info for No Bus:microcode [ 10.289986] Registering platform device 'microcode'. Parent at platform [ 10.296611] device: 'microcode': device_add [ 10.300822] bus: 'platform': add device microcode [ 10.305555] PM: Adding info for platform:microcode [ 10.310503] Microcode Update Driver: v2.00 <[email protected]> <[email protected]> [ 10.319126] initcall microcode_intel_module_init+0x0/0x45<7>usb usb3: suspend_rh (auto-stop) [ 10.327635] returned 0 after 36 msecs [ 10.331402] calling init_lapic_sysfs+0x0/0x3f [ 10.335862] Registering sysdev class 'lapic' [ 10.340241] Registering sys device of class 'lapic' [ 10.345140] Registering sys device 'lapic0' [ 10.349429] initcall init_lapic_sysfs+0x0/0x3f returned 0 after 12 msecs [ 10.356178] calling ioapic_init_sysfs+0x0/0x99 [ 10.360724] Registering sysdev class 'ioapic' [ 10.365189] Registering sys device of class 'ioapic' [ 10.370173] Registering sys device 'ioapic0' [ 10.374549] initcall ioapic_init_sysfs+0x0/0x99 returned 0 after 13 msecs [ 10.381384] calling add_pcspkr+0x0/0x43 [ 10.385325] Registering platform device 'pcspkr'. Parent at platform [ 10.391689] device: 'pcspkr': device_add [ 10.395634] bus: 'platform': add device pcspkr [ 10.400113] PM: Adding info for platform:pcspkr [ 10.404752] initcall add_pcspkr+0x0/0x43 returned 0 after 18 msecs [ 10.410977] calling uv_ptc_init+0x0/0x75 [ 10.415003] initcall uv_ptc_init+0x0/0x75 returned 0 after 0 msecs [ 10.421231] calling uv_bau_init+0x0/0x4ec [ 10.425344] initcall uv_bau_init+0x0/0x4ec returned 0 after 0 msecs [ 10.431655] calling audit_classes_init+0x0/0xaf [ 10.436298] initcall audit_classes_init+0x0/0xaf returned 0 after 0 msecs [ 10.443129] calling debug_pagealloc_proc_init+0x0/0x2b [ 10.448388] initcall debug_pagealloc_proc_init+0x0/0x2b returned 0 after 0 msecs [ 10.455831] calling pt_dump_init+0x0/0x30 [ 10.459950] initcall pt_dump_init+0x0/0x30 returned 0 after 0 msecs [ 10.466265] calling init+0x0/0x12 [ 10.469695] initcall init+0x0/0x12 returned 0 after 0 msecs [ 10.475314] calling init+0x0/0x12 [ 10.478736] initcall init+0x0/0x12 returned 0 after 0 msecs [ 10.484358] calling init_vdso_vars+0x0/0x1a7 [ 10.488741] initcall init_vdso_vars+0x0/0x1a7 returned 0 after 0 msecs [ 10.495312] calling ia32_binfmt_init+0x0/0x14 [ 10.499773] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 0 msecs [ 10.506437] calling sysenter_setup+0x0/0x2c5 [ 10.510814] initcall sysenter_setup+0x0/0x2c5 returned 0 after 0 msecs [ 10.517389] calling init_sched_debug_procfs+0x0/0x2c [ 10.522465] initcall init_sched_debug_procfs+0x0/0x2c returned 0 after 0 msecs [ 10.529738] calling ioresources_init+0x0/0x36 [ 10.534204] initcall ioresources_init+0x0/0x36 returned 0 after 0 msecs [ 10.543421] calling uid_cache_init+0x0/0x6e [ 10.547721] initcall uid_cache_init+0x0/0x6e returned 0 after 0 msecs [ 10.554209] calling init_posix_timers+0x0/0xfd [ 10.558761] initcall init_posix_timers+0x0/0xfd returned 0 after 0 msecs [ 10.565510] calling init_posix_cpu_timers+0x0/0xd4 [ 10.570416] initcall init_posix_cpu_timers+0x0/0xd4 returned 0 after 0 msecs [ 10.577509] calling nsproxy_cache_init+0x0/0x2d [ 10.582148] initcall nsproxy_cache_init+0x0/0x2d returned 0 after 0 msecs [ 10.588982] calling create_proc_profile+0x0/0x265 [ 10.593802] initcall create_proc_profile+0x0/0x265 returned 0 after 0 msecs [ 10.600811] calling timekeeping_init_device+0x0/0x22 [ 10.605879] Registering sysdev class 'timekeeping' [ 10.610779] Registering sys device of class 'timekeeping' [ 10.616197] Registering sys device 'timekeeping0' [ 10.621008] initcall timekeeping_init_device+0x0/0x22 returned 0 after 14 msecs [ 10.628366] calling init_clocksource_sysfs+0x0/0x50 [ 10.633345] Registering sysdev class 'clocksource' [ 10.638250] Registering sys device of class 'clocksource' [ 10.643667] Registering sys device 'clocksource0' [ 10.648481] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 14 msecs [ 10.655753] calling init_timer_list_procfs+0x0/0x2c [ 10.660738] initcall init_timer_list_procfs+0x0/0x2c returned 0 after 0 msecs [ 10.667916] calling init_tstats_procfs+0x0/0x2c [ 10.672555] initcall init_tstats_procfs+0x0/0x2c returned 0 after 0 msecs [ 10.679385] calling lockdep_proc_init+0x0/0x3c [ 10.683947] initcall lockdep_proc_init+0x0/0x3c returned 0 after 0 msecs [ 10.690693] calling futex_init+0x0/0x6a [ 10.694648] initcall futex_init+0x0/0x6a returned 0 after 0 msecs [ 10.700789] calling proc_dma_init+0x0/0x22 [ 10.704992] initcall proc_dma_init+0x0/0x22 returned 0 after 0 msecs [ 10.711391] calling kallsyms_init+0x0/0x25 [ 10.715594] initcall kallsyms_init+0x0/0x25 returned 0 after 0 msecs [ 10.721998] calling backtrace_regression_test+0x0/0xfd [ 10.727237] ====[ backtrace testing ]=========== [ 10.731868] Testing a backtrace from process context. [ 10.736934] The following trace is a kernel self test and not a bug! [ 10.743299] Pid: 1, comm: swapper Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 10.751054] Call Trace: [ 10.753522] [<ffffffff802183e1>] ? paravirt_read_tsc+0x17/0x1a [ 10.759454] [<ffffffff80270bd4>] backtrace_regression_test+0x3d/0xfd [ 10.765907] [<ffffffff802640a0>] ? clocksource_read+0xc/0xe [ 10.771579] [<ffffffff8026428f>] ? getnstimeofday+0x41/0xa3 [ 10.777252] [<ffffffff802614e9>] ? ktime_set+0x9/0x32 [ 10.782405] [<ffffffff80261584>] ? timespec_to_ktime+0x1a/0x1c [ 10.788337] [<ffffffff80261d25>] ? ktime_get+0x23/0x25 [ 10.793576] [<ffffffff8020a05c>] do_one_initcall+0x4c/0x151 [ 10.799249] [<ffffffff8025b577>] ? start_workqueue_thread+0x2e/0x32 [ 10.805614] [<ffffffff8025b958>] ? __create_workqueue_key+0xd3/0x190 [ 10.812066] [<ffffffff81261a19>] kernel_init+0x1ba/0x22b [ 10.816306] hub 1-0:1.0: hub_suspend [ 10.816319] usb usb1: bus auto-suspend [ 10.816321] ehci_hcd 0000:00:1d.7: suspend root hub [ 10.816353] hub 2-0:1.0: hub_suspend [ 10.816356] usb usb2: bus auto-suspend [ 10.816358] usb usb2: suspend_rh [ 10.840314] usb usb4: suspend_rh (auto-stop) [ 10.844619] [<ffffffff80212089>] child_rip+0xa/0x11 [ 10.849598] [<ffffffff8126185f>] ? kernel_init+0x0/0x22b [ 10.855011] [<ffffffff8021207f>] ? child_rip+0x0/0x11 [ 10.860163] Testing a backtrace from irq context. [ 10.864887] The following trace is a kernel self test and not a bug! [ 10.871258] Pid: 6, comm: ksoftirqd/1 Not tainted 2.6.27-rc6-tip-00189-gafeef79-dirty #1 [ 10.879357] Call Trace: [ 10.881824] <IRQ> [<ffffffff80270b89>] backtrace_test_irq_callback+0xe/0x1c [ 10.889004] [<ffffffff80250213>] tasklet_action+0x83/0xec [ 10.894502] [<ffffffff8021256c>] ? call_softirq+0x1c/0x28 [ 10.900002] [<ffffffff8024fe84>] __do_softirq+0x6f/0xc5 [ 10.905328] [<ffffffff8024fad0>] ? ksoftirqd+0x0/0xb8 [ 10.910480] [<ffffffff8021256c>] call_softirq+0x1c/0x28 [ 10.915805] <EOI> [<ffffffff80214bc4>] do_softirq+0x49/0x91 [ 10.921601] [<ffffffff8024fb18>] ksoftirqd+0x48/0xb8 [ 10.926666] [<ffffffff8025eecd>] kthread+0x4e/0x7d [ 10.931557] [<ffffffff80212089>] child_rip+0xa/0x11 [ 10.936535] [<ffffffff8025ee7f>] ? kthread+0x0/0x7d [ 10.941514] [<ffffffff8021207f>] ? child_rip+0x0/0x11 [ 10.946671] Testing a saved backtrace. [ 10.950438] The following trace is a kernel self test and not a bug! [ 10.956802] [<ffffffff8021cb47>] save_stack_trace+0x2f/0x50 [ 10.962510] [<ffffffff80270c72>] backtrace_regression_test+0xdb/0xfd [ 10.968996] [<ffffffff8020a05c>] do_one_initcall+0x4c/0x151 [ 10.974702] [<ffffffff81261a19>] kernel_init+0x1ba/0x22b [ 10.980150] [<ffffffff80212089>] child_rip+0xa/0x11 [ 10.985167] [<ffffffffffffffff>] 0xffffffffffffffff [ 10.990181] ====[ end of backtrace testing ]==== [ 10.994812] initcall backtrace_regression_test+0x0/0xfd returned 0 after 255 msecs [ 11.002432] calling pid_namespaces_init+0x0/0x2d [ 11.007158] initcall pid_namespaces_init+0x0/0x2d returned 0 after 0 msecs [ 11.014079] calling audit_init+0x0/0x101 [ 11.018105] audit: initializing netlink socket (disabled) [ 11.023547] type=2000 audit(1221047986.020:1): initialized [ 11.029051] audit: cannot initialize inotify handle [ 11.033945] initcall audit_init+0x0/0x101 returned 0 after 15 msecs [ 11.040256] calling rcu_torture_init+0x0/0x627 [ 11.044803] rcu-torture:--- Start of test: nreaders=4 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1 [ 11.059032] initcall rcu_torture_init+0x0/0x627 returned 0 after 13 msecs [ 11.065873] usb usb5: suspend_rh (auto-stop) [ 11.070170] calling utsname_sysctl_init+0x0/0x14 [ 11.074892] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 0 msecs [ 11.081813] calling init_lstats_procfs+0x0/0x25 [ 11.086453] initcall init_lstats_procfs+0x0/0x25 returned 0 after 0 msecs [ 11.093287] calling init_sched_switch_trace+0x0/0x41 [ 11.098354] initcall init_sched_switch_trace+0x0/0x41 returned 0 after 0 msecs [ 11.105626] calling init_stack_trace+0x0/0x12 [ 11.110084] initcall init_stack_trace+0x0/0x12 returned 0 after 0 msecs [ 11.116745] calling init_function_trace+0x0/0x12 [ 11.121468] initcall init_function_trace+0x0/0x12 returned 0 after 0 msecs [ 11.128388] calling stack_trace_init+0x0/0x84 [ 11.132868] initcall stack_trace_init+0x0/0x84 returned 0 after 0 msecs [ 11.139526] calling init_mmio_trace+0x0/0x12 [ 11.143899] initcall init_mmio_trace+0x0/0x12 returned 0 after 0 msecs [ 11.150473] calling init_per_zone_pages_min+0x0/0x45 [ 11.155655] initcall init_per_zone_pages_min+0x0/0x45 returned 0 after 0 msecs [ 11.162925] calling pdflush_init+0x0/0x1d [ 11.167144] initcall pdflush_init+0x0/0x1d returned 0 after 0 msecs [ 11.173459] calling kswapd_init+0x0/0x4c [ 11.177549] initcall kswapd_init+0x0/0x4c returned 0 after 0 msecs [ 11.183775] calling setup_vmstat+0x0/0x44 [ 11.187890] initcall setup_vmstat+0x0/0x44 returned 0 after 0 msecs [ 11.194206] calling mm_sysfs_init+0x0/0x29 [ 11.198410] initcall mm_sysfs_init+0x0/0x29 returned 0 after 0 msecs [ 11.204812] calling procswaps_init+0x0/0x22 [ 11.209103] initcall procswaps_init+0x0/0x22 returned 0 after 0 msecs [ 11.215588] calling hugetlb_init+0x0/0x2a4 [ 11.219791] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 11.226171] initcall hugetlb_init+0x0/0x2a4 returned 0 after 6 msecs [ 11.232572] calling init_tmpfs+0x0/0xda [ 11.236582] initcall init_tmpfs+0x0/0xda returned 0 after 0 msecs [ 11.242720] calling slab_sysfs_init+0x0/0xf0 [ 11.260500] initcall slab_sysfs_init+0x0/0xf0 returned 0 after 12 msecs [ 11.267164] calling fasync_init+0x0/0x2a [ 11.271351] initcall fasync_init+0x0/0x2a returned 0 after 0 msecs [ 11.277582] calling aio_setup+0x0/0x73 [ 11.281849] initcall aio_setup+0x0/0x73 returned 0 after 0 msecs [ 11.287902] calling init_sys32_ioctl+0x0/0x7c [ 11.292375] initcall init_sys32_ioctl+0x0/0x7c returned 0 after 0 msecs [ 11.299034] calling init_mbcache+0x0/0x14 [ 11.303147] initcall init_mbcache+0x0/0x14 returned 0 after 0 msecs [ 11.309461] calling dnotify_init+0x0/0x2a [ 11.313725] initcall dnotify_init+0x0/0x2a returned 0 after 0 msecs [ 11.320037] calling vmcore_init+0x0/0x8b5 [ 11.324150] initcall vmcore_init+0x0/0x8b5 returned 0 after 0 msecs [ 11.330464] calling configfs_init+0x0/0xb3 [ 11.334842] initcall configfs_init+0x0/0xb3 returned 0 after 0 msecs [ 11.341245] calling init_devpts_fs+0x0/0x40 [ 11.345586] initcall init_devpts_fs+0x0/0x40 returned 0 after 0 msecs [ 11.352071] calling init_dlm+0x0/0x88 [ 11.356055] device: 'dlm-control': device_add [ 11.360453] PM: Adding info for No Bus:dlm-control [ 11.365373] device: 'dlm_plock': device_add [ 11.369591] PM: Adding info for No Bus:dlm_plock [ 11.374313] DLM (built Sep 10 2008 13:51:24) installed [ 11.379471] initcall init_dlm+0x0/0x88 returned 0 after 22 msecs [ 11.385527] calling init_reiserfs_fs+0x0/0x95 [ 11.390154] initcall init_reiserfs_fs+0x0/0x95 returned 0 after 0 msecs [ 11.396817] calling init_ext3_fs+0x0/0x6a [ 11.401239] initcall init_ext3_fs+0x0/0x6a returned 0 after 0 msecs [ 11.407552] calling journal_init+0x0/0x93 [ 11.412264] initcall journal_init+0x0/0x93 returned 0 after 0 msecs [ 11.418580] calling init_ext2_fs+0x0/0x5b [ 11.422844] initcall init_ext2_fs+0x0/0x5b returned 0 after 0 msecs [ 11.429160] calling init_cramfs_fs+0x0/0x31 [ 11.433467] initcall init_cramfs_fs+0x0/0x31 returned 0 after 0 msecs [ 11.439953] calling init_ramfs_fs+0x0/0x12 [ 11.444154] initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 msecs [ 11.450556] calling init_hugetlbfs_fs+0x0/0x98 [ 11.455301] initcall init_hugetlbfs_fs+0x0/0x98 returned 0 after 0 msecs [ 11.462052] calling init_coda+0x0/0x13c [ 11.466154] device class 'coda': registering [ 11.470542] device: 'cfs0': device_add [ 11.474326] PM: Adding info for No Bus:cfs0 [ 11.478625] device: 'cfs1': device_add [ 11.482416] PM: Adding info for No Bus:cfs1 [ 11.489282] device: 'cfs2': device_add [ 11.493071] PM: Adding info for No Bus:cfs2 [ 11.497364] device: 'cfs3': device_add [ 11.501151] PM: Adding info for No Bus:cfs3 [ 11.505445] device: 'cfs4': device_add [ 11.509228] PM: Adding info for No Bus:cfs4 [ 11.513526] initcall init_coda+0x0/0x13c returned 0 after 45 msecs [ 11.519754] calling init_fat_fs+0x0/0x4f [ 11.524074] initcall init_fat_fs+0x0/0x4f returned 0 after 0 msecs [ 11.530304] calling init_msdos_fs+0x0/0x12 [ 11.534505] initcall init_msdos_fs+0x0/0x12 returned 0 after 0 msecs [ 11.540907] calling init_hfsplus_fs+0x0/0x5d [ 11.545431] initcall init_hfsplus_fs+0x0/0x5d returned 0 after 0 msecs [ 11.552005] calling init_hfs_fs+0x0/0x5d [ 11.556187] initcall init_hfs_fs+0x0/0x5d returned 0 after 0 msecs [ 11.562416] calling vxfs_init+0x0/0x59 [ 11.566423] initcall vxfs_init+0x0/0x59 returned 0 after 0 msecs [ 11.572479] calling init_nfs_fs+0x0/0x113 [ 11.577533] initcall init_nfs_fs+0x0/0x113 returned 0 after 0 msecs [ 11.583846] calling init_nfsd+0x0/0xbb [ 11.587699] Installing knfsd (copyright (C) 1996 [email protected]). [ 11.594866] initcall init_nfsd+0x0/0xbb returned 0 after 6 msecs [ 11.600922] calling init_nlm+0x0/0x22 [ 11.604690] initcall init_nlm+0x0/0x22 returned 0 after 0 msecs [ 11.610657] calling init_nls_cp437+0x0/0x12 [ 11.614948] initcall init_nls_cp437+0x0/0x12 returned 0 after 0 msecs [ 11.621436] calling init_nls_cp737+0x0/0x12 [ 11.625723] initcall init_nls_cp737+0x0/0x12 returned 0 after 0 msecs [ 11.632208] calling init_nls_cp852+0x0/0x12 [ 11.636498] initcall init_nls_cp852+0x0/0x12 returned 0 after 0 msecs [ 11.642983] calling init_nls_cp855+0x0/0x12 [ 11.647271] initcall init_nls_cp855+0x0/0x12 returned 0 after 0 msecs [ 11.653758] calling init_nls_cp857+0x0/0x12 [ 11.658044] initcall init_nls_cp857+0x0/0x12 returned 0 after 0 msecs [ 11.664531] calling init_nls_cp863+0x0/0x12 [ 11.668818] initcall init_nls_cp863+0x0/0x12 returned 0 after 0 msecs [ 11.675302] calling init_nls_cp865+0x0/0x12 [ 11.679589] initcall init_nls_cp865+0x0/0x12 returned 0 after 0 msecs [ 11.686076] calling init_nls_cp866+0x0/0x12 [ 11.690362] initcall init_nls_cp866+0x0/0x12 returned 0 after 0 msecs [ 11.696850] calling init_nls_cp869+0x0/0x12 [ 11.701136] initcall init_nls_cp869+0x0/0x12 returned 0 after 0 msecs [ 11.707621] calling init_nls_cp874+0x0/0x12 [ 11.711908] initcall init_nls_cp874+0x0/0x12 returned 0 after 0 msecs [ 11.718396] calling init_nls_cp932+0x0/0x12 [ 11.722682] initcall init_nls_cp932+0x0/0x12 returned 0 after 0 msecs [ 11.729169] calling init_nls_euc_jp+0x0/0x48 [ 11.733542] initcall init_nls_euc_jp+0x0/0x48 returned 0 after 0 msecs [ 11.740114] calling init_nls_cp936+0x0/0x12 [ 11.744401] initcall init_nls_cp936+0x0/0x12 returned 0 after 0 msecs [ 11.750885] calling init_nls_cp949+0x0/0x12 [ 11.755172] initcall init_nls_cp949+0x0/0x12 returned 0 after 0 msecs [ 11.761660] calling init_nls_cp950+0x0/0x12 [ 11.765946] initcall init_nls_cp950+0x0/0x12 returned 0 after 0 msecs [ 11.772433] calling init_nls_cp1250+0x0/0x12 [ 11.776805] initcall init_nls_cp1250+0x0/0x12 returned 0 after 0 msecs [ 11.783375] calling init_nls_cp1251+0x0/0x12 [ 11.787748] initcall init_nls_cp1251+0x0/0x12 returned 0 after 0 msecs [ 11.794321] calling init_nls_ascii+0x0/0x12 [ 11.798608] initcall init_nls_ascii+0x0/0x12 returned 0 after 0 msecs [ 11.805095] calling init_nls_iso8859_1+0x0/0x12 [ 11.809726] initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 msecs [ 11.816367] hub 3-0:1.0: hub_suspend [ 11.816374] usb usb3: bus auto-suspend [ 11.816376] usb usb3: suspend_rh [ 11.816395] hub 4-0:1.0: hub_suspend [ 11.816398] usb usb4: bus auto-suspend [ 11.816400] usb usb4: suspend_rh [ 11.837746] calling init_nls_iso8859_2+0x0/0x12 [ 11.842380] initcall init_nls_iso8859_2+0x0/0x12 returned 0 after 0 msecs [ 11.849215] calling init_nls_iso8859_3+0x0/0x12 [ 11.853849] initcall init_nls_iso8859_3+0x0/0x12 returned 0 after 0 msecs [ 11.860684] calling init_nls_iso8859_5+0x0/0x12 [ 11.865318] initcall init_nls_iso8859_5+0x0/0x12 returned 0 after 0 msecs [ 11.872150] calling init_nls_iso8859_6+0x0/0x12 [ 11.876782] initcall init_nls_iso8859_6+0x0/0x12 returned 0 after 0 msecs [ 11.883613] calling init_nls_iso8859_7+0x0/0x12 [ 11.888245] initcall init_nls_iso8859_7+0x0/0x12 returned 0 after 0 msecs [ 11.895083] calling init_nls_cp1255+0x0/0x12 [ 11.899456] initcall init_nls_cp1255+0x0/0x12 returned 0 after 0 msecs [ 11.906031] calling init_nls_iso8859_13+0x0/0x12 [ 11.910750] initcall init_nls_iso8859_13+0x0/0x12 returned 0 after 0 msecs [ 11.917670] calling init_nls_iso8859_14+0x0/0x12 [ 11.922390] initcall init_nls_iso8859_14+0x0/0x12 returned 0 after 0 msecs [ 11.929311] calling init_nls_koi8_u+0x0/0x12 [ 11.933683] initcall init_nls_koi8_u+0x0/0x12 returned 0 after 0 msecs [ 11.940253] calling init_nls_koi8_ru+0x0/0x48 [ 11.944712] initcall init_nls_koi8_ru+0x0/0x48 returned 0 after 0 msecs [ 11.951371] calling init_nls_utf8+0x0/0x25 [ 11.955572] initcall init_nls_utf8+0x0/0x25 returned 0 after 0 msecs [ 11.961973] calling init_sysv_fs+0x0/0x4f [ 11.966255] initcall init_sysv_fs+0x0/0x4f returned 0 after 0 msecs [ 11.972570] calling init_smb_fs+0x0/0x6c [ 11.976368] hub 5-0:1.0: hub_suspend [ 11.976372] usb usb5: bus auto-suspend [ 11.976373] usb usb5: suspend_rh [ 11.987507] initcall init_smb_fs+0x0/0x6c returned 0 after 0 msecs [ 11.993736] calling init_cifs+0x0/0x517 [ 11.998810] initcall init_cifs+0x0/0x517 returned 0 after 1 msecs [ 12.004959] calling init_hpfs_fs+0x0/0x5a [ 12.009229] initcall init_hpfs_fs+0x0/0x5a returned 0 after 0 msecs [ 12.015542] calling init_ufs_fs+0x0/0x5a [ 12.019724] initcall init_ufs_fs+0x0/0x5a returned 0 after 0 msecs [ 12.025954] calling init_affs_fs+0x0/0x5a [ 12.030222] initcall init_affs_fs+0x0/0x5a returned 0 after 0 msecs [ 12.036536] calling init_autofs_fs+0x0/0x12 [ 12.040824] initcall init_autofs_fs+0x0/0x12 returned 0 after 0 msecs [ 12.047308] calling init_autofs4_fs+0x0/0x12 [ 12.051682] initcall init_autofs4_fs+0x0/0x12 returned -16 after 0 msecs [ 12.058432] initcall init_autofs4_fs+0x0/0x12 returned with error code -16 [ 12.065437] calling init_adfs_fs+0x0/0x5a [ 12.069705] initcall init_adfs_fs+0x0/0x5a returned 0 after 0 msecs [ 12.076017] calling fuse_init+0x0/0x11f [ 12.079958] fuse init (API version 7.9) [ 12.084128] device: 'fuse': device_add [ 12.087914] PM: Adding info for No Bus:fuse [ 12.092218] initcall fuse_init+0x0/0x11f returned 0 after 11 msecs [ 12.098447] calling init_udf_fs+0x0/0x5a [ 12.102628] initcall init_udf_fs+0x0/0x5a returned 0 after 0 msecs [ 12.108857] calling init_jfs_fs+0x0/0x2b0 [ 12.113309] JFS: nTxBlock = 7438, nTxLock = 59505 [ 12.123668] initcall init_jfs_fs+0x0/0x2b0 returned 0 after 10 msecs [ 12.130079] calling init_xfs_fs+0x0/0xa9 [ 12.134105] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 12.146962] SGI XFS Quota Management subsystem [ 12.151443] initcall init_xfs_fs+0x0/0xa9 returned 0 after 16 msecs [ 12.157761] calling ocfs2_init+0x0/0x29c [ 12.161785] OCFS2 1.5.0 [ 12.164680] initcall ocfs2_init+0x0/0x29c returned 0 after 2 msecs [ 12.170907] calling ocfs2_stack_glue_init+0x0/0x95 [ 12.175827] initcall ocfs2_stack_glue_init+0x0/0x95 returned 0 after 0 msecs [ 12.182919] calling o2cb_stack_init+0x0/0x12 [ 12.187292] ocfs2: Registered cluster interface o2cb [ 12.192276] initcall o2cb_stack_init+0x0/0x12 returned 0 after 4 msecs [ 12.198849] calling init_o2nm+0x0/0x9a [ 12.202702] OCFS2 Node Manager 1.5.0 [ 12.206629] initcall init_o2nm+0x0/0x9a returned 0 after 3 msecs [ 12.212685] calling dlm_init+0x0/0x233 [ 12.216537] OCFS2 DLM 1.5.0 [ 12.219982] initcall dlm_init+0x0/0x233 returned 0 after 3 msecs [ 12.226054] calling init_dlmfs_fs+0x0/0xd3 [ 12.230253] OCFS2 DLMFS 1.5.0 [ 12.233472] OCFS2 User DLM kernel interface loaded [ 12.238279] initcall init_dlmfs_fs+0x0/0xd3 returned 0 after 7 msecs [ 12.244681] calling key_proc_init+0x0/0x33 [ 12.248890] initcall key_proc_init+0x0/0x33 returned 0 after 0 msecs [ 12.255288] calling crypto_algapi_init+0x0/0xd [ 12.259839] initcall crypto_algapi_init+0x0/0xd returned 0 after 0 msecs [ 12.266585] calling blkcipher_module_init+0x0/0x2a [ 12.271480] initcall blkcipher_module_init+0x0/0x2a returned 0 after 0 msecs [ 12.278573] calling seqiv_module_init+0x0/0x12 [ 12.283119] initcall seqiv_module_init+0x0/0x12 returned 0 after 0 msecs [ 12.289865] calling cryptomgr_init+0x0/0x12 [ 12.294151] initcall cryptomgr_init+0x0/0x12 returned 0 after 0 msecs [ 12.300639] calling hmac_module_init+0x0/0x12 [ 12.305109] initcall hmac_module_init+0x0/0x12 returned 0 after 0 msecs [ 12.311767] calling crypto_null_mod_init+0x0/0x7b [ 12.316578] initcall crypto_null_mod_init+0x0/0x7b returned 0 after 0 msecs [ 12.323583] calling md4_mod_init+0x0/0x12 [ 12.327697] initcall md4_mod_init+0x0/0x12 returned 0 after 0 msecs [ 12.334011] calling md5_mod_init+0x0/0x12 [ 12.338124] initcall md5_mod_init+0x0/0x12 returned 0 after 0 msecs [ 12.344438] calling rmd160_mod_init+0x0/0x12 [ 12.348813] initcall rmd160_mod_init+0x0/0x12 returned 0 after 0 msecs [ 12.355385] calling rmd256_mod_init+0x0/0x12 [ 12.359759] initcall rmd256_mod_init+0x0/0x12 returned 0 after 0 msecs [ 12.366332] calling sha1_generic_mod_init+0x0/0x12 [ 12.371226] initcall sha1_generic_mod_init+0x0/0x12 returned 0 after 0 msecs [ 12.378320] calling sha512_generic_mod_init+0x0/0x3f [ 12.383389] initcall sha512_generic_mod_init+0x0/0x3f returned 0 after 0 msecs [ 12.390661] calling tgr192_mod_init+0x0/0x64 [ 12.395037] initcall tgr192_mod_init+0x0/0x64 returned 0 after 0 msecs [ 12.401612] calling crypto_ecb_module_init+0x0/0x12 [ 12.406596] initcall crypto_ecb_module_init+0x0/0x12 returned 0 after 0 msecs [ 12.413776] calling crypto_cbc_module_init+0x0/0x12 [ 12.418756] initcall crypto_cbc_module_init+0x0/0x12 returned 0 after 0 msecs [ 12.425936] calling crypto_pcbc_module_init+0x0/0x12 [ 12.431001] initcall crypto_pcbc_module_init+0x0/0x12 returned 0 after 0 msecs [ 12.440827] calling crypto_cts_module_init+0x0/0x12 [ 12.445806] initcall crypto_cts_module_init+0x0/0x12 returned 0 after 0 msecs [ 12.452986] calling crypto_module_init+0x0/0x12 [ 12.457618] initcall crypto_module_init+0x0/0x12 returned 0 after 0 msecs [ 12.464452] calling crypto_module_init+0x0/0x12 [ 12.469085] initcall crypto_module_init+0x0/0x12 returned 0 after 0 msecs [ 12.475916] calling crypto_ctr_module_init+0x0/0x3f [ 12.480898] initcall crypto_ctr_module_init+0x0/0x3f returned 0 after 0 msecs [ 12.488074] calling crypto_gcm_module_init+0x0/0x5d [ 12.493057] initcall crypto_gcm_module_init+0x0/0x5d returned 0 after 0 msecs [ 12.500234] calling crypto_ccm_module_init+0x0/0x5d [ 12.505219] initcall crypto_ccm_module_init+0x0/0x5d returned 0 after 0 msecs [ 12.512399] calling des_generic_mod_init+0x0/0x3f [ 12.517207] initcall des_generic_mod_init+0x0/0x3f returned 0 after 0 msecs [ 12.524210] calling fcrypt_mod_init+0x0/0x12 [ 12.528584] initcall fcrypt_mod_init+0x0/0x12 returned 0 after 0 msecs [ 12.535154] calling blowfish_mod_init+0x0/0x12 [ 12.539701] initcall blowfish_mod_init+0x0/0x12 returned 0 after 0 msecs [ 12.546448] calling twofish_mod_init+0x0/0x12 [ 12.550909] initcall twofish_mod_init+0x0/0x12 returned 0 after 0 msecs [ 12.557570] calling serpent_mod_init+0x0/0x3f [ 12.562033] initcall serpent_mod_init+0x0/0x3f returned 0 after 0 msecs [ 12.568694] calling aes_init+0x0/0x2ce [ 12.572562] initcall aes_init+0x0/0x2ce returned 0 after 0 msecs [ 12.578614] calling cast5_mod_init+0x0/0x12 [ 12.582901] initcall cast5_mod_init+0x0/0x12 returned 0 after 0 msecs [ 12.589388] calling cast6_mod_init+0x0/0x12 [ 12.593676] initcall cast6_mod_init+0x0/0x12 returned 0 after 0 msecs [ 12.600160] calling arc4_init+0x0/0x12 [ 12.604015] initcall arc4_init+0x0/0x12 returned 0 after 0 msecs [ 12.610070] calling tea_mod_init+0x0/0x64 [ 12.614186] initcall tea_mod_init+0x0/0x64 returned 0 after 0 msecs [ 12.620500] calling seed_init+0x0/0x12 [ 12.624351] initcall seed_init+0x0/0x12 returned 0 after 0 msecs [ 12.630406] calling salsa20_generic_mod_init+0x0/0x12 [ 12.635560] initcall salsa20_generic_mod_init+0x0/0x12 returned 0 after 0 msecs [ 12.642915] calling michael_mic_init+0x0/0x12 [ 12.647377] initcall michael_mic_init+0x0/0x12 returned 0 after 0 msecs [ 12.654038] calling crc32c_mod_init+0x0/0x3f [ 12.658412] initcall crc32c_mod_init+0x0/0x3f returned 0 after 0 msecs [ 12.664991] calling crypto_authenc_module_init+0x0/0x12 [ 12.670319] initcall crypto_authenc_module_init+0x0/0x12 returned 0 after 0 msecs [ 12.677850] calling lzo_mod_init+0x0/0x12 [ 12.681964] initcall lzo_mod_init+0x0/0x12 returned 0 after 0 msecs [ 12.688274] calling bsg_init+0x0/0x126 [ 12.692287] device class 'bsg': registering [ 12.696593] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 12.704001] initcall bsg_init+0x0/0x126 returned 0 after 11 msecs [ 12.710144] calling noop_init+0x0/0x14 [ 12.714001] io scheduler noop registered [ 12.717940] initcall noop_init+0x0/0x14 returned 0 after 3 msecs [ 12.723992] calling as_init+0x0/0x14 [ 12.727671] io scheduler anticipatory registered [ 12.732302] initcall as_init+0x0/0x14 returned 0 after 4 msecs [ 12.738182] calling cfq_init+0x0/0x94 [ 12.742263] io scheduler cfq registered (default) [ 12.746985] initcall cfq_init+0x0/0x94 returned 0 after 4 msecs [ 12.752953] calling init_kmp+0x0/0x12 [ 12.756725] initcall init_kmp+0x0/0x12 returned 0 after 0 msecs [ 12.762692] calling init_bm+0x0/0x12 [ 12.766371] initcall init_bm+0x0/0x12 returned 0 after 0 msecs [ 12.772249] calling init_fsm+0x0/0x12 [ 12.776015] initcall init_fsm+0x0/0x12 returned 0 after 0 msecs [ 12.781983] calling percpu_counter_startup+0x0/0x14 [ 12.786965] initcall percpu_counter_startup+0x0/0x14 returned 0 after 0 msecs [ 12.794144] calling pci_proc_init+0x0/0x6a [ 12.798530] initcall pci_proc_init+0x0/0x6a returned 0 after 0 msecs [ 12.804933] calling pcie_portdrv_init+0x0/0x4c [ 12.809599] bus: 'pci_express': registered [ 12.813714] bus: 'pci': add driver pcieport-driver [ 12.818529] bus: 'pci': driver_probe_device: matched device 0000:00:01.0 with driver pcieport-driver [ 12.827670] bus: 'pci': really_probe: probing driver pcieport-driver with device 0000:00:01.0 [ 12.836225] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 12.842713] pcieport-driver 0000:00:01.0: found MSI capability [ 12.848560] pci_express 0000:00:01.0:pcie00: allocate port service [ 12.854753] device: '0000:00:01.0:pcie00': device_add [ 12.859825] bus: 'pci_express': add device 0000:00:01.0:pcie00 [ 12.865681] PM: Adding info for pci_express:0000:00:01.0:pcie00 [ 12.871714] pci_express 0000:00:01.0:pcie03: allocate port service [ 12.877907] device: '0000:00:01.0:pcie03': device_add [ 12.882980] bus: 'pci_express': add device 0000:00:01.0:pcie03 [ 12.888844] PM: Adding info for pci_express:0000:00:01.0:pcie03 [ 12.894912] driver: '0000:00:01.0': driver_bound: bound to device 'pcieport-driver' [ 12.902582] bus: 'pci': really_probe: bound device 0000:00:01.0 to driver pcieport-driver [ 12.910773] bus: 'pci': driver_probe_device: matched device 0000:00:1c.0 with driver pcieport-driver [ 12.919918] bus: 'pci': really_probe: probing driver pcieport-driver with device 0000:00:1c.0 [ 12.928467] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 12.934952] pcieport-driver 0000:00:1c.0: found MSI capability [ 12.940799] pci_express 0000:00:1c.0:pcie00: allocate port service [ 12.946991] device: '0000:00:1c.0:pcie00': device_add [ 12.952061] bus: 'pci_express': add device 0000:00:1c.0:pcie00 [ 12.957922] PM: Adding info for pci_express:0000:00:1c.0:pcie00 [ 12.963952] pci_express 0000:00:1c.0:pcie02: allocate port service [ 12.970146] device: '0000:00:1c.0:pcie02': device_add [ 12.975224] bus: 'pci_express': add device 0000:00:1c.0:pcie02 [ 12.981080] PM: Adding info for pci_express:0000:00:1c.0:pcie02 [ 12.987111] pci_express 0000:00:1c.0:pcie03: allocate port service [ 12.993304] device: '0000:00:1c.0:pcie03': device_add [ 12.998375] bus: 'pci_express': add device 0000:00:1c.0:pcie03 [ 13.004231] PM: Adding info for pci_express:0000:00:1c.0:pcie03 [ 13.010302] driver: '0000:00:1c.0': driver_bound: bound to device 'pcieport-driver' [ 13.017972] bus: 'pci': really_probe: bound device 0000:00:1c.0 to driver pcieport-driver [ 13.026161] bus: 'pci': driver_probe_device: matched device 0000:00:1c.4 with driver pcieport-driver [ 13.035301] bus: 'pci': really_probe: probing driver pcieport-driver with device 0000:00:1c.4 [ 13.043850] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 13.050335] pcieport-driver 0000:00:1c.4: found MSI capability [ 13.056181] pci_express 0000:00:1c.4:pcie00: allocate port service [ 13.062373] device: '0000:00:1c.4:pcie00': device_add [ 13.067444] bus: 'pci_express': add device 0000:00:1c.4:pcie00 [ 13.073305] PM: Adding info for pci_express:0000:00:1c.4:pcie00 [ 13.079335] pci_express 0000:00:1c.4:pcie02: allocate port service [ 13.085528] device: '0000:00:1c.4:pcie02': device_add [ 13.090598] bus: 'pci_express': add device 0000:00:1c.4:pcie02 [ 13.096454] PM: Adding info for pci_express:0000:00:1c.4:pcie02 [ 13.102483] pci_express 0000:00:1c.4:pcie03: allocate port service [ 13.108676] device: '0000:00:1c.4:pcie03': device_add [ 13.113747] bus: 'pci_express': add device 0000:00:1c.4:pcie03 [ 13.119602] PM: Adding info for pci_express:0000:00:1c.4:pcie03 [ 13.125671] driver: '0000:00:1c.4': driver_bound: bound to device 'pcieport-driver' [ 13.133340] bus: 'pci': really_probe: bound device 0000:00:1c.4 to driver pcieport-driver [ 13.141530] bus: 'pci': driver_probe_device: matched device 0000:00:1c.5 with driver pcieport-driver [ 13.150669] bus: 'pci': really_probe: probing driver pcieport-driver with device 0000:00:1c.5 [ 13.159219] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 13.165703] pcieport-driver 0000:00:1c.5: found MSI capability [ 13.171551] pci_express 0000:00:1c.5:pcie00: allocate port service [ 13.177746] device: '0000:00:1c.5:pcie00': device_add [ 13.182817] bus: 'pci_express': add device 0000:00:1c.5:pcie00 [ 13.188672] PM: Adding info for pci_express:0000:00:1c.5:pcie00 [ 13.194702] pci_express 0000:00:1c.5:pcie02: allocate port service [ 13.200895] device: '0000:00:1c.5:pcie02': device_add [ 13.205969] bus: 'pci_express': add device 0000:00:1c.5:pcie02 [ 13.211832] PM: Adding info for pci_express:0000:00:1c.5:pcie02 [ 13.217861] pci_express 0000:00:1c.5:pcie03: allocate port service [ 13.224055] device: '0000:00:1c.5:pcie03': device_add [ 13.229126] bus: 'pci_express': add device 0000:00:1c.5:pcie03 [ 13.234982] PM: Adding info for pci_express:0000:00:1c.5:pcie03 [ 13.241051] driver: '0000:00:1c.5': driver_bound: bound to device 'pcieport-driver' [ 13.248720] bus: 'pci': really_probe: bound device 0000:00:1c.5 to driver pcieport-driver [ 13.257030] initcall pcie_portdrv_init+0x0/0x4c returned 0 after 426 msecs [ 13.263949] calling aer_service_init+0x0/0x20 [ 13.268408] bus: 'pci_express': add driver aer [ 13.272981] initcall aer_service_init+0x0/0x20 returned 0 after 4 msecs [ 13.279640] calling pci_hotplug_init+0x0/0x4e [ 13.284100] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 13.289686] initcall pci_hotplug_init+0x0/0x4e returned 0 after 5 msecs [ 13.296344] calling acpiphp_init+0x0/0x5f [ 13.300456] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 13.311196] acpiphp_glue: can't get bus number, assuming 0 [ 13.317093] initcall acpiphp_init+0x0/0x5f returned -19 after 15 msecs [ 13.323664] calling ibm_acpiphp_init+0x0/0x16f [ 13.332407] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed [ 13.338862] initcall ibm_acpiphp_init+0x0/0x16f returned -19 after 10 msecs [ 13.345870] calling zt5550_init+0x0/0x7c [ 13.349896] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2 [ 13.356695] bus: 'pci': add driver zt5550_hc [ 13.361113] initcall zt5550_init+0x0/0x7c returned 0 after 10 msecs [ 13.367425] calling cpcihp_generic_init+0x0/0x426 [ 13.372230] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 [ 13.379985] cpcihp_generic: not configured, disabling. [ 13.387694] initcall cpcihp_generic_init+0x0/0x426 returned -22 after 14 msecs [ 13.394964] initcall cpcihp_generic_init+0x0/0x426 returned with error code -22 [ 13.402407] calling pcied_init+0x0/0x7b [ 13.406346] bus: 'pci_express': add driver hpdriver [ 13.411247] bus: 'pci_express': driver_probe_device: matched device 0000:00:1c.0:pcie02 with driver hpdriver [ 13.421081] bus: 'pci_express': really_probe: probing driver hpdriver with device 0000:00:1c.0:pcie02 [ 13.430441] bus: 'pci_express': driver_probe_device: matched device 0000:00:1c.4:pcie02 with driver hpdriver [ 13.440280] bus: 'pci_express': really_probe: probing driver hpdriver with device 0000:00:1c.4:pcie02 [ 13.449625] bus: 'pci_express': driver_probe_device: matched device 0000:00:1c.5:pcie02 with driver hpdriver [ 13.459459] bus: 'pci_express': really_probe: probing driver hpdriver with device 0000:00:1c.5:pcie02 [ 13.468899] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 13.475527] initcall pcied_init+0x0/0x7b returned 0 after 65 msecs [ 13.481753] calling shpcd_init+0x0/0x62 [ 13.485692] bus: 'pci': add driver shpchp [ 13.489847] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.496561] initcall shpcd_init+0x0/0x62 returned 0 after 10 msecs [ 13.502785] calling dummyphp_init+0x0/0x97 [ 13.506983] fakephp: Fake PCI Hot Plug Controller Driver [ 13.512380] pci_create_slot: created pci_slot on 0000:00:00 [ 13.518080] pci_create_slot: created pci_slot on 0000:00:01 [ 13.523770] pci_create_slot: created pci_slot on 0000:00:1b [ 13.529462] pci_create_slot: created pci_slot on 0000:00:1c [ 13.535156] pci_create_slot: created pci_slot on 0000:00:1d [ 13.540855] pci_create_slot: created pci_slot on 0000:00:1e [ 13.546551] pci_create_slot: created pci_slot on 0000:00:1f [ 13.552256] pci_create_slot: created pci_slot on 0000:01:00 [ 13.557950] pci_create_slot: created pci_slot on 0000:02:00 [ 13.563641] pci_create_slot: created pci_slot on 0000:04:00 [ 13.569333] pci_create_slot: created pci_slot on 0000:05:02 [ 13.575033] pci_create_slot: created pci_slot on 0000:05:04 [ 13.580722] pci_create_slot: created pci_slot on 0000:05:05 [ 13.586406] initcall dummyphp_init+0x0/0x97 returned 0 after 75 msecs [ 13.592896] calling corgibl_init+0x0/0x12 [ 13.597010] bus: 'platform': add driver generic-bl [ 13.601920] initcall corgibl_init+0x0/0x12 returned 0 after 4 msecs [ 13.608232] calling mbp_init+0x0/0xe3 [ 13.611999] initcall mbp_init+0x0/0xe3 returned -19 after 0 msecs [ 13.618141] calling display_class_init+0x0/0x7e [ 13.622773] device class 'display': registering [ 13.627417] initcall display_class_init+0x0/0x7e returned 0 after 4 msecs [ 13.634253] calling arcfb_init+0x0/0x74 [ 13.638192] initcall arcfb_init+0x0/0x74 returned -6 after 0 msecs [ 13.644419] initcall arcfb_init+0x0/0x74 returned with error code -6 [ 13.650908] calling pm2fb_init+0x0/0x159 [ 13.654936] bus: 'pci': add driver pm2fb [ 13.659010] initcall pm2fb_init+0x0/0x159 returned 0 after 3 msecs [ 13.665240] calling pm3fb_init+0x0/0x115 [ 13.669267] bus: 'pci': add driver pm3fb [ 13.673334] initcall pm3fb_init+0x0/0x115 returned 0 after 3 msecs [ 13.679561] calling matroxfb_init+0x0/0x9b3 [ 13.683848] bus: 'pci': add driver matroxfb [ 13.688177] initcall matroxfb_init+0x0/0x9b3 returned 0 after 4 msecs [ 13.694670] calling rivafb_init+0x0/0x1e1 [ 13.698783] rivafb_setup START [ 13.701856] bus: 'pci': add driver rivafb [ 13.706014] initcall rivafb_init+0x0/0x1e1 returned 0 after 6 msecs [ 13.712326] calling nvidiafb_init+0x0/0x2c3 [ 13.716614] bus: 'pci': add driver nvidiafb [ 13.720938] initcall nvidiafb_init+0x0/0x2c3 returned 0 after 4 msecs [ 13.727425] calling sisfb_init+0x0/0x7dd [ 13.731452] bus: 'pci': add driver sisfb [ 13.735526] initcall sisfb_init+0x0/0x7dd returned 0 after 3 msecs [ 13.741756] calling kyrofb_init+0x0/0xf6 [ 13.745783] bus: 'pci': add driver kyrofb [ 13.749949] initcall kyrofb_init+0x0/0xf6 returned 0 after 3 msecs [ 13.756175] calling savagefb_init+0x0/0x77 [ 13.760374] bus: 'pci': add driver savagefb [ 13.764710] initcall savagefb_init+0x0/0x77 returned 0 after 4 msecs [ 13.771110] calling gx1fb_init+0x0/0x130 [ 13.775138] bus: 'pci': add driver gx1fb [ 13.779206] initcall gx1fb_init+0x0/0x130 returned 0 after 3 msecs [ 13.785435] calling gxfb_init+0x0/0x84 [ 13.789289] bus: 'pci': add driver gxfb [ 13.793270] initcall gxfb_init+0x0/0x84 returned 0 after 3 msecs [ 13.799323] calling tdfxfb_init+0x0/0x12f [ 13.803436] bus: 'pci': add driver tdfxfb [ 13.807598] initcall tdfxfb_init+0x0/0x12f returned 0 after 3 msecs [ 13.813914] calling tridentfb_init+0x0/0x21c [ 13.818286] bus: 'pci': add driver tridentfb [ 13.822703] initcall tridentfb_init+0x0/0x21c returned 0 after 4 msecs [ 13.829278] calling vmlfb_init+0x0/0x96 [ 13.833216] vmlfb: initializing [ 13.836374] bus: 'pci': add driver vmlfb [ 13.840443] initcall vmlfb_init+0x0/0x96 returned 0 after 6 msecs [ 13.846586] calling s3fb_init+0x0/0xf4 [ 13.850439] bus: 'pci': add driver s3fb [ 13.854422] initcall s3fb_init+0x0/0xf4 returned 0 after 3 msecs [ 13.860478] calling arkfb_init+0x0/0x59 [ 13.864414] bus: 'pci': add driver arkfb [ 13.868486] initcall arkfb_init+0x0/0x59 returned 0 after 3 msecs [ 13.874627] calling hgafb_init+0x0/0x6b [ 13.878565] bus: 'platform': add driver hgafb [ 13.883051] Registering platform device 'hgafb.0'. Parent at platform [ 13.889504] device: 'hgafb.0': device_add [ 13.893537] bus: 'platform': add device hgafb.0 [ 13.898095] PM: Adding info for platform:hgafb.0 [ 13.902821] bus: 'platform': driver_probe_device: matched device hgafb.0 with driver hgafb [ 13.911097] bus: 'platform': really_probe: probing driver hgafb with device hgafb.0 [ 13.918776] hgafb: HGA card not detected. [ 13.922810] hgafb: probe of hgafb.0 failed with error -22 [ 13.928224] initcall hgafb_init+0x0/0x6b returned 0 after 47 msecs [ 13.934452] calling xenfb_init+0x0/0x58 [ 13.938391] initcall xenfb_init+0x0/0x58 returned -19 after 0 msecs [ 13.944708] calling carminefb_init+0x0/0x39 [ 13.948997] bus: 'pci': add driver carminefb [ 13.953412] initcall carminefb_init+0x0/0x39 returned 0 after 4 msecs [ 13.959898] calling uvesafb_init+0x0/0x3e7 [ 13.964103] bus: 'platform': add driver uvesafb [ 13.968754] Registering platform device 'uvesafb.0'. Parent at platform [ 13.975380] device: 'uvesafb.0': device_add [ 13.979585] bus: 'platform': add device uvesafb.0 [ 13.984316] PM: Adding info for platform:uvesafb.0 [ 13.989216] bus: 'platform': driver_probe_device: matched device uvesafb.0 with driver uvesafb [ 13.997839] bus: 'platform': really_probe: probing driver uvesafb with device uvesafb.0 [ 14.005996] uvesafb: failed to execute /sbin/v86d [ 14.010717] uvesafb: make sure that the v86d helper is installed and executable [ 14.018042] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 14.024668] uvesafb: vbe_init() failed with -22 [ 14.029224] uvesafb: probe of uvesafb.0 failed with error -22 [ 14.034988] initcall uvesafb_init+0x0/0x3e7 returned 0 after 67 msecs [ 14.041476] calling imacfb_init+0x0/0x1de [ 14.045589] initcall imacfb_init+0x0/0x1de returned -19 after 0 msecs [ 14.052074] calling acpi_reserve_resources+0x0/0xeb [ 14.057058] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 0 msecs [ 14.064236] calling acpi_ac_init+0x0/0x45 [ 14.068362] bus: 'acpi': add driver ac [ 14.072307] initcall acpi_ac_init+0x0/0x45 returned 0 after 3 msecs [ 14.078624] calling acpi_fan_init+0x0/0x5e [ 14.082827] bus: 'acpi': add driver fan [ 14.086839] initcall acpi_fan_init+0x0/0x5e returned 0 after 3 msecs [ 14.093243] calling irqrouter_init_sysfs+0x0/0x38 [ 14.098047] Registering sysdev class 'irqrouter' [ 14.102777] Registering sys device of class 'irqrouter' [ 14.108020] Registering sys device 'irqrouter0' [ 14.112655] initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after 13 msecs [ 14.119748] calling acpi_pci_slot_init+0x0/0x20 [ 14.124867] initcall acpi_pci_slot_init+0x0/0x20 returned 0 after 0 msecs [ 14.131700] calling asus_acpi_init+0x0/0xfe [ 14.135992] bus: 'acpi': add driver asus_acpi [ 14.140535] bus: 'acpi': remove driver asus_acpi [ 14.145262] driver: 'asus_acpi': driver_release [ 14.149820] initcall asus_acpi_init+0x0/0xfe returned -19 after 13 msecs [ 14.156567] calling toshiba_acpi_init+0x0/0x183 [ 14.161209] initcall toshiba_acpi_init+0x0/0x183 returned -19 after 0 msecs [ 14.168218] calling rand_initialize+0x0/0x31 [ 14.172605] initcall rand_initialize+0x0/0x31 returned 0 after 0 msecs [ 14.179177] calling tty_init+0x0/0x1cd [ 14.183035] device: 'tty': device_add [ 14.186738] PM: Adding info for No Bus:tty [ 14.190954] device: 'console': device_add [ 14.194998] PM: Adding info for No Bus:console [ 14.199554] device: 'ptmx': device_add [ 14.203351] PM: Adding info for No Bus:ptmx [ 14.207648] device: 'tty0': device_add [ 14.211433] PM: Adding info for No Bus:tty0 [ 14.215728] device class 'vc': registering [ 14.219944] device: 'vcs': device_add [ 14.223641] PM: Adding info for No Bus:vcs [ 14.227854] device: 'vcsa': device_add [ 14.231644] PM: Adding info for No Bus:vcsa [ 14.235950] device: 'tty1': device_add [ 14.239735] PM: Adding info for No Bus:tty1 [ 14.244028] device: 'tty2': device_add [ 14.247810] PM: Adding info for No Bus:tty2 [ 14.252105] device: 'tty3': device_add [ 14.255887] PM: Adding info for No Bus:tty3 [ 14.260180] device: 'tty4': device_add [ 14.266524] PM: Adding info for No Bus:tty4 [ 14.270820] device: 'tty5': device_add [ 14.274602] PM: Adding info for No Bus:tty5 [ 14.278896] device: 'tty6': device_add [ 14.282678] PM: Adding info for No Bus:tty6 [ 14.286984] device: 'tty7': device_add [ 14.290769] PM: Adding info for No Bus:tty7 [ 14.295062] device: 'tty8': device_add [ 14.298852] PM: Adding info for No Bus:tty8 [ 14.303147] device: 'tty9': device_add [ 14.306938] PM: Adding info for No Bus:tty9 [ 14.311231] device: 'tty10': device_add [ 14.315101] PM: Adding info for No Bus:tty10 [ 14.319481] device: 'tty11': device_add [ 14.323357] PM: Adding info for No Bus:tty11 [ 14.327738] device: 'tty12': device_add [ 14.331609] PM: Adding info for No Bus:tty12 [ 14.335989] device: 'tty13': device_add [ 14.339859] PM: Adding info for No Bus:tty13 [ 14.344240] device: 'tty14': device_add [ 14.348110] PM: Adding info for No Bus:tty14 [ 14.352490] device: 'tty15': device_add [ 14.356370] PM: Adding info for No Bus:tty15 [ 14.360751] device: 'tty16': device_add [ 14.364622] PM: Adding info for No Bus:tty16 [ 14.369002] device: 'tty17': device_add [ 14.372873] PM: Adding info for No Bus:tty17 [ 14.377253] device: 'tty18': device_add [ 14.381123] PM: Adding info for No Bus:tty18 [ 14.385504] device: 'tty19': device_add [ 14.389380] PM: Adding info for No Bus:tty19 [ 14.393761] device: 'tty20': device_add [ 14.397632] PM: Adding info for No Bus:tty20 [ 14.402013] device: 'tty21': device_add [ 14.405892] PM: Adding info for No Bus:tty21 [ 14.410273] device: 'tty22': device_add [ 14.414144] PM: Adding info for No Bus:tty22 [ 14.418524] device: 'tty23': device_add [ 14.422401] PM: Adding info for No Bus:tty23 [ 14.426782] device: 'tty24': device_add [ 14.430653] PM: Adding info for No Bus:tty24 [ 14.435034] device: 'tty25': device_add [ 14.438905] PM: Adding info for No Bus:tty25 [ 14.443285] device: 'tty26': device_add [ 14.447161] PM: Adding info for No Bus:tty26 [ 14.451543] device: 'tty27': device_add [ 14.455421] PM: Adding info for No Bus:tty27 [ 14.459802] device: 'tty28': device_add [ 14.463677] PM: Adding info for No Bus:tty28 [ 14.468057] device: 'tty29': device_add [ 14.471928] PM: Adding info for No Bus:tty29 [ 14.476309] device: 'tty30': device_add [ 14.480185] PM: Adding info for No Bus:tty30 [ 14.484571] device: 'tty31': device_add [ 14.488438] PM: Adding info for No Bus:tty31 [ 14.492820] device: 'tty32': device_add [ 14.496691] PM: Adding info for No Bus:tty32 [ 14.501073] device: 'tty33': device_add [ 14.504943] PM: Adding info for No Bus:tty33 [ 14.509323] device: 'tty34': device_add [ 14.513209] PM: Adding info for No Bus:tty34 [ 14.517590] device: 'tty35': device_add [ 14.521461] PM: Adding info for No Bus:tty35 [ 14.525858] device: 'tty36': device_add [ 14.529730] PM: Adding info for No Bus:tty36 [ 14.534110] device: 'tty37': device_add [ 14.537988] PM: Adding info for No Bus:tty37 [ 14.542368] device: 'tty38': device_add [ 14.546240] PM: Adding info for No Bus:tty38 [ 14.550620] device: 'tty39': device_add [ 14.554491] PM: Adding info for No Bus:tty39 [ 14.558871] device: 'tty40': device_add [ 14.562743] PM: Adding info for No Bus:tty40 [ 14.567123] device: 'tty41': device_add [ 14.571000] PM: Adding info for No Bus:tty41 [ 14.575381] device: 'tty42': device_add [ 14.579253] PM: Adding info for No Bus:tty42 [ 14.583633] device: 'tty43': device_add [ 14.587504] PM: Adding info for No Bus:tty43 [ 14.591884] device: 'tty44': device_add [ 14.595755] PM: Adding info for No Bus:tty44 [ 14.600135] device: 'tty45': device_add [ 14.604014] PM: Adding info for No Bus:tty45 [ 14.608394] device: 'tty46': device_add [ 14.612266] PM: Adding info for No Bus:tty46 [ 14.616646] device: 'tty47': device_add [ 14.620527] PM: Adding info for No Bus:tty47 [ 14.624908] device: 'tty48': device_add [ 14.628779] PM: Adding info for No Bus:tty48 [ 14.633159] device: 'tty49': device_add [ 14.637037] PM: Adding info for No Bus:tty49 [ 14.641418] device: 'tty50': device_add [ 14.645289] PM: Adding info for No Bus:tty50 [ 14.649669] device: 'tty51': device_add [ 14.653541] PM: Adding info for No Bus:tty51 [ 14.657921] device: 'tty52': device_add [ 14.661799] PM: Adding info for No Bus:tty52 [ 14.666180] device: 'tty53': device_add [ 14.670052] PM: Adding info for No Bus:tty53 [ 14.674432] device: 'tty54': device_add [ 14.678304] PM: Adding info for No Bus:tty54 [ 14.682684] device: 'tty55': device_add [ 14.686570] PM: Adding info for No Bus:tty55 [ 14.690951] device: 'tty56': device_add [ 14.694836] PM: Adding info for No Bus:tty56 [ 14.699217] device: 'tty57': device_add [ 14.703090] PM: Adding info for No Bus:tty57 [ 14.707470] device: 'tty58': device_add [ 14.711341] PM: Adding info for No Bus:tty58 [ 14.715722] device: 'tty59': device_add [ 14.719597] PM: Adding info for No Bus:tty59 [ 14.723977] device: 'tty60': device_add [ 14.727863] PM: Adding info for No Bus:tty60 [ 14.732244] device: 'tty61': device_add [ 14.736115] PM: Adding info for No Bus:tty61 [ 14.740496] device: 'tty62': device_add [ 14.744368] PM: Adding info for No Bus:tty62 [ 14.748747] device: 'tty63': device_add [ 14.752626] PM: Adding info for No Bus:tty63 [ 14.757067] initcall tty_init+0x0/0x1cd returned 0 after 547 msecs [ 14.763295] calling pty_init+0x0/0x462 [ 14.767175] device: 'ptyp0': device_add [ 14.771046] PM: Adding info for No Bus:ptyp0 [ 14.775430] device: 'ptyp1': device_add [ 14.779301] PM: Adding info for No Bus:ptyp1 [ 14.783682] device: 'ptyp2': device_add [ 14.787553] PM: Adding info for No Bus:ptyp2 [ 14.791933] device: 'ptyp3': device_add [ 14.795811] PM: Adding info for No Bus:ptyp3 [ 14.800191] device: 'ptyp4': device_add [ 14.804063] PM: Adding info for No Bus:ptyp4 [ 14.808444] device: 'ptyp5': device_add [ 14.812316] PM: Adding info for No Bus:ptyp5 [ 14.816696] device: 'ptyp6': device_add [ 14.820567] PM: Adding info for No Bus:ptyp6 [ 14.824945] device: 'ptyp7': device_add [ 14.828823] PM: Adding info for No Bus:ptyp7 [ 14.833204] device: 'ptyp8': device_add [ 14.837084] PM: Adding info for No Bus:ptyp8 [ 14.841464] device: 'ptyp9': device_add [ 14.845345] PM: Adding info for No Bus:ptyp9 [ 14.849725] device: 'ptypa': device_add [ 14.853597] PM: Adding info for No Bus:ptypa [ 14.857977] device: 'ptypb': device_add [ 14.861855] PM: Adding info for No Bus:ptypb [ 14.866236] device: 'ptypc': device_add [ 14.870108] PM: Adding info for No Bus:ptypc [ 14.874487] device: 'ptypd': device_add [ 14.878359] PM: Adding info for No Bus:ptypd [ 14.882739] device: 'ptype': device_add [ 14.886617] PM: Adding info for No Bus:ptype [ 14.890998] device: 'ptypf': device_add [ 14.894870] PM: Adding info for No Bus:ptypf [ 14.899249] device: 'ptyq0': device_add [ 14.903121] PM: Adding info for No Bus:ptyq0 [ 14.907501] device: 'ptyq1': device_add [ 14.911373] PM: Adding info for No Bus:ptyq1 [ 14.915752] device: 'ptyq2': device_add [ 14.919631] PM: Adding info for No Bus:ptyq2 [ 14.924012] device: 'ptyq3': device_add [ 14.927884] PM: Adding info for No Bus:ptyq3 [ 14.932264] device: 'ptyq4': device_add [ 14.936135] PM: Adding info for No Bus:ptyq4 [ 14.940515] device: 'ptyq5': device_add [ 14.944397] PM: Adding info for No Bus:ptyq5 [ 14.948777] device: 'ptyq6': device_add [ 14.952655] PM: Adding info for No Bus:ptyq6 [ 14.957034] device: 'ptyq7': device_add [ 14.960906] PM: Adding info for No Bus:ptyq7 [ 14.965289] device: 'ptyq8': device_add [ 14.969161] PM: Adding info for No Bus:ptyq8 [ 14.973542] device: 'ptyq9': device_add [ 14.977420] PM: Adding info for No Bus:ptyq9 [ 14.981800] device: 'ptyqa': device_add [ 14.985673] PM: Adding info for No Bus:ptyqa [ 14.990053] device: 'ptyqb': device_add [ 14.993925] PM: Adding info for No Bus:ptyqb [ 14.998305] device: 'ptyqc': device_add [ 15.002178] PM: Adding info for No Bus:ptyqc [ 15.006574] device: 'ptyqd': device_add [ 15.013009] PM: Adding info for No Bus:ptyqd [ 15.017389] device: 'ptyqe': device_add [ 15.021262] PM: Adding info for No Bus:ptyqe [ 15.025642] device: 'ptyqf': device_add [ 15.029514] PM: Adding info for No Bus:ptyqf [ 15.033894] device: 'ptyr0': device_add [ 15.037766] PM: Adding info for No Bus:ptyr0 [ 15.042146] device: 'ptyr1': device_add [ 15.046028] PM: Adding info for No Bus:ptyr1 [ 15.050409] device: 'ptyr2': device_add [ 15.054290] PM: Adding info for No Bus:ptyr2 [ 15.058671] device: 'ptyr3': device_add [ 15.062544] PM: Adding info for No Bus:ptyr3 [ 15.066923] device: 'ptyr4': device_add [ 15.070796] PM: Adding info for No Bus:ptyr4 [ 15.075176] device: 'ptyr5': device_add [ 15.079055] PM: Adding info for No Bus:ptyr5 [ 15.083435] device: 'ptyr6': device_add [ 15.087308] PM: Adding info for No Bus:ptyr6 [ 15.091688] device: 'ptyr7': device_add [ 15.095561] PM: Adding info for No Bus:ptyr7 [ 15.099940] device: 'ptyr8': device_add [ 15.103819] PM: Adding info for No Bus:ptyr8 [ 15.108199] device: 'ptyr9': device_add [ 15.112072] PM: Adding info for No Bus:ptyr9 [ 15.116452] device: 'ptyra': device_add [ 15.120324] PM: Adding info for No Bus:ptyra [ 15.124703] device: 'ptyrb': device_add [ 15.128576] PM: Adding info for No Bus:ptyrb [ 15.132955] device: 'ptyrc': device_add [ 15.136834] PM: Adding info for No Bus:ptyrc [ 15.141214] device: 'ptyrd': device_add [ 15.145088] PM: Adding info for No Bus:ptyrd [ 15.149468] device: 'ptyre': device_add [ 15.153340] PM: Adding info for No Bus:ptyre [ 15.157721] device: 'ptyrf': device_add [ 15.161604] PM: Adding info for No Bus:ptyrf [ 15.165983] device: 'ptys0': device_add [ 15.169863] PM: Adding info for No Bus:ptys0 [ 15.174244] device: 'ptys1': device_add [ 15.178116] PM: Adding info for No Bus:ptys1 [ 15.182496] device: 'ptys2': device_add [ 15.186369] PM: Adding info for No Bus:ptys2 [ 15.190749] device: 'ptys3': device_add [ 15.194628] PM: Adding info for No Bus:ptys3 [ 15.199008] device: 'ptys4': device_add [ 15.202882] PM: Adding info for No Bus:ptys4 [ 15.207261] device: 'ptys5': device_add [ 15.211135] PM: Adding info for No Bus:ptys5 [ 15.215514] device: 'ptys6': device_add [ 15.219391] PM: Adding info for No Bus:ptys6 [ 15.223772] device: 'ptys7': device_add [ 15.227659] PM: Adding info for No Bus:ptys7 [ 15.232040] device: 'ptys8': device_add [ 15.235914] PM: Adding info for No Bus:ptys8 [ 15.240294] device: 'ptys9': device_add [ 15.244167] PM: Adding info for No Bus:ptys9 [ 15.248566] device: 'ptysa': device_add [ 15.252436] PM: Adding info for No Bus:ptysa [ 15.256816] device: 'ptysb': device_add [ 15.260704] PM: Adding info for No Bus:ptysb [ 15.265085] device: 'ptysc': device_add [ 15.268959] PM: Adding info for No Bus:ptysc [ 15.273339] device: 'ptysd': device_add [ 15.277213] PM: Adding info for No Bus:ptysd [ 15.281592] device: 'ptyse': device_add [ 15.285466] PM: Adding info for No Bus:ptyse [ 15.289846] device: 'ptysf': device_add [ 15.293726] PM: Adding info for No Bus:ptysf [ 15.298105] device: 'ptyt0': device_add [ 15.301979] PM: Adding info for No Bus:ptyt0 [ 15.306359] device: 'ptyt1': device_add [ 15.310232] PM: Adding info for No Bus:ptyt1 [ 15.314612] device: 'ptyt2': device_add [ 15.318491] PM: Adding info for No Bus:ptyt2 [ 15.322872] device: 'ptyt3': device_add [ 15.326747] PM: Adding info for No Bus:ptyt3 [ 15.331126] device: 'ptyt4': device_add [ 15.335000] PM: Adding info for No Bus:ptyt4 [ 15.339380] device: 'ptyt5': device_add [ 15.343254] PM: Adding info for No Bus:ptyt5 [ 15.347633] device: 'ptyt6': device_add [ 15.351514] PM: Adding info for No Bus:ptyt6 [ 15.355894] device: 'ptyt7': device_add [ 15.359767] PM: Adding info for No Bus:ptyt7 [ 15.364147] device: 'ptyt8': device_add [ 15.368030] PM: Adding info for No Bus:ptyt8 [ 15.372410] device: 'ptyt9': device_add [ 15.376285] PM: Adding info for No Bus:ptyt9 [ 15.380666] device: 'ptyta': device_add [ 15.384542] PM: Adding info for No Bus:ptyta [ 15.388925] device: 'ptytb': device_add [ 15.392799] PM: Adding info for No Bus:ptytb [ 15.397179] device: 'ptytc': device_add [ 15.401053] PM: Adding info for No Bus:ptytc [ 15.405433] device: 'ptytd': device_add [ 15.409313] PM: Adding info for No Bus:ptytd [ 15.413693] device: 'ptyte': device_add [ 15.417568] PM: Adding info for No Bus:ptyte [ 15.421948] device: 'ptytf': device_add [ 15.425822] PM: Adding info for No Bus:ptytf [ 15.430202] device: 'ptyu0': device_add [ 15.434076] PM: Adding info for No Bus:ptyu0 [ 15.438455] device: 'ptyu1': device_add [ 15.442336] PM: Adding info for No Bus:ptyu1 [ 15.446716] device: 'ptyu2': device_add [ 15.450591] PM: Adding info for No Bus:ptyu2 [ 15.454970] device: 'ptyu3': device_add [ 15.458845] PM: Adding info for No Bus:ptyu3 [ 15.463224] device: 'ptyu4': device_add [ 15.467098] PM: Adding info for No Bus:ptyu4 [ 15.471478] device: 'ptyu5': device_add [ 15.475367] PM: Adding info for No Bus:ptyu5 [ 15.479747] device: 'ptyu6': device_add [ 15.483622] PM: Adding info for No Bus:ptyu6 [ 15.488019] device: 'ptyu7': device_add [ 15.491895] PM: Adding info for No Bus:ptyu7 [ 15.496275] device: 'ptyu8': device_add [ 15.500149] PM: Adding info for No Bus:ptyu8 [ 15.504529] device: 'ptyu9': device_add [ 15.508410] PM: Adding info for No Bus:ptyu9 [ 15.512789] device: 'ptyua': device_add [ 15.516664] PM: Adding info for No Bus:ptyua [ 15.521043] device: 'ptyub': device_add [ 15.524917] PM: Adding info for No Bus:ptyub [ 15.529298] device: 'ptyuc': device_add [ 15.533179] PM: Adding info for No Bus:ptyuc [ 15.537559] device: 'ptyud': device_add [ 15.541435] PM: Adding info for No Bus:ptyud [ 15.545814] device: 'ptyue': device_add [ 15.549689] PM: Adding info for No Bus:ptyue [ 15.554069] device: 'ptyuf': device_add [ 15.557944] PM: Adding info for No Bus:ptyuf [ 15.562323] device: 'ptyv0': device_add [ 15.566206] PM: Adding info for No Bus:ptyv0 [ 15.570586] device: 'ptyv1': device_add [ 15.574461] PM: Adding info for No Bus:ptyv1 [ 15.578841] device: 'ptyv2': device_add [ 15.582725] PM: Adding info for No Bus:ptyv2 [ 15.587105] device: 'ptyv3': device_add [ 15.590981] PM: Adding info for No Bus:ptyv3 [ 15.595360] device: 'ptyv4': device_add [ 15.599242] PM: Adding info for No Bus:ptyv4 [ 15.603622] device: 'ptyv5': device_add [ 15.607506] PM: Adding info for No Bus:ptyv5 [ 15.611886] device: 'ptyv6': device_add [ 15.615763] PM: Adding info for No Bus:ptyv6 [ 15.620142] device: 'ptyv7': device_add [ 15.624024] PM: Adding info for No Bus:ptyv7 [ 15.628404] device: 'ptyv8': device_add [ 15.632280] PM: Adding info for No Bus:ptyv8 [ 15.636669] device: 'ptyv9': device_add [ 15.640540] PM: Adding info for No Bus:ptyv9 [ 15.644923] device: 'ptyva': device_add [ 15.648799] PM: Adding info for No Bus:ptyva [ 15.653198] device: 'ptyvb': device_add [ 15.657081] PM: Adding info for No Bus:ptyvb [ 15.661464] device: 'ptyvc': device_add [ 15.665341] PM: Adding info for No Bus:ptyvc [ 15.669722] device: 'ptyvd': device_add [ 15.673598] PM: Adding info for No Bus:ptyvd [ 15.677979] device: 'ptyve': device_add [ 15.681864] PM: Adding info for No Bus:ptyve [ 15.686247] device: 'ptyvf': device_add [ 15.690129] PM: Adding info for No Bus:ptyvf [ 15.694512] device: 'ptyw0': device_add [ 15.698387] PM: Adding info for No Bus:ptyw0 [ 15.702769] device: 'ptyw1': device_add [ 15.706645] PM: Adding info for No Bus:ptyw1 [ 15.711027] device: 'ptyw2': device_add [ 15.714902] PM: Adding info for No Bus:ptyw2 [ 15.719284] device: 'ptyw3': device_add [ 15.723170] PM: Adding info for No Bus:ptyw3 [ 15.727569] device: 'ptyw4': device_add [ 15.731446] PM: Adding info for No Bus:ptyw4 [ 15.735828] device: 'ptyw5': device_add [ 15.739704] PM: Adding info for No Bus:ptyw5 [ 15.744087] device: 'ptyw6': device_add [ 15.747969] PM: Adding info for No Bus:ptyw6 [ 15.752352] device: 'ptyw7': device_add [ 15.758784] PM: Adding info for No Bus:ptyw7 [ 15.763165] device: 'ptyw8': device_add [ 15.767042] PM: Adding info for No Bus:ptyw8 [ 15.771424] device: 'ptyw9': device_add [ 15.775300] PM: Adding info for No Bus:ptyw9 [ 15.779680] device: 'ptywa': device_add [ 15.783564] PM: Adding info for No Bus:ptywa [ 15.787946] device: 'ptywb': device_add [ 15.791832] PM: Adding info for No Bus:ptywb [ 15.796213] device: 'ptywc': device_add [ 15.800089] PM: Adding info for No Bus:ptywc [ 15.804471] device: 'ptywd': device_add [ 15.808348] PM: Adding info for No Bus:ptywd [ 15.812728] device: 'ptywe': device_add [ 15.816612] PM: Adding info for No Bus:ptywe [ 15.820996] device: 'ptywf': device_add [ 15.824872] PM: Adding info for No Bus:ptywf [ 15.829253] device: 'ptyx0': device_add [ 15.833144] PM: Adding info for No Bus:ptyx0 [ 15.837527] device: 'ptyx1': device_add [ 15.841417] PM: Adding info for No Bus:ptyx1 [ 15.845798] device: 'ptyx2': device_add [ 15.849678] PM: Adding info for No Bus:ptyx2 [ 15.854059] device: 'ptyx3': device_add [ 15.857936] PM: Adding info for No Bus:ptyx3 [ 15.862317] device: 'ptyx4': device_add [ 15.866193] PM: Adding info for No Bus:ptyx4 [ 15.870574] device: 'ptyx5': device_add [ 15.874457] PM: Adding info for No Bus:ptyx5 [ 15.878838] device: 'ptyx6': device_add [ 15.882715] PM: Adding info for No Bus:ptyx6 [ 15.887096] device: 'ptyx7': device_add [ 15.890973] PM: Adding info for No Bus:ptyx7 [ 15.895354] device: 'ptyx8': device_add [ 15.899240] PM: Adding info for No Bus:ptyx8 [ 15.903621] device: 'ptyx9': device_add [ 15.907505] PM: Adding info for No Bus:ptyx9 [ 15.911887] device: 'ptyxa': device_add [ 15.915764] PM: Adding info for No Bus:ptyxa [ 15.920145] device: 'ptyxb': device_add [ 15.924021] PM: Adding info for No Bus:ptyxb [ 15.928402] device: 'ptyxc': device_add [ 15.932279] PM: Adding info for No Bus:ptyxc [ 15.936667] device: 'ptyxd': device_add [ 15.940546] PM: Adding info for No Bus:ptyxd [ 15.944929] device: 'ptyxe': device_add [ 15.948806] PM: Adding info for No Bus:ptyxe [ 15.953203] device: 'ptyxf': device_add [ 15.957081] PM: Adding info for No Bus:ptyxf [ 15.961464] device: 'ptyy0': device_add [ 15.965347] PM: Adding info for No Bus:ptyy0 [ 15.969746] device: 'ptyy1': device_add [ 15.973624] PM: Adding info for No Bus:ptyy1 [ 15.978005] device: 'ptyy2': device_add [ 15.981882] PM: Adding info for No Bus:ptyy2 [ 15.986263] device: 'ptyy3': device_add [ 15.990152] PM: Adding info for No Bus:ptyy3 [ 15.994534] device: 'ptyy4': device_add [ 15.998421] PM: Adding info for No Bus:ptyy4 [ 16.002803] device: 'ptyy5': device_add [ 16.006690] PM: Adding info for No Bus:ptyy5 [ 16.011071] device: 'ptyy6': device_add [ 16.014948] PM: Adding info for No Bus:ptyy6 [ 16.019330] device: 'ptyy7': device_add [ 16.023207] PM: Adding info for No Bus:ptyy7 [ 16.027589] device: 'ptyy8': device_add [ 16.031473] PM: Adding info for No Bus:ptyy8 [ 16.035855] device: 'ptyy9': device_add [ 16.039732] PM: Adding info for No Bus:ptyy9 [ 16.044113] device: 'ptyya': device_add [ 16.047990] PM: Adding info for No Bus:ptyya [ 16.052371] device: 'ptyyb': device_add [ 16.056254] PM: Adding info for No Bus:ptyyb [ 16.060655] device: 'ptyyc': device_add [ 16.064528] PM: Adding info for No Bus:ptyyc [ 16.068910] device: 'ptyyd': device_add [ 16.072788] PM: Adding info for No Bus:ptyyd [ 16.077169] device: 'ptyye': device_add [ 16.081047] PM: Adding info for No Bus:ptyye [ 16.085427] device: 'ptyyf': device_add [ 16.089311] PM: Adding info for No Bus:ptyyf [ 16.093693] device: 'ptyz0': device_add [ 16.097571] PM: Adding info for No Bus:ptyz0 [ 16.101952] device: 'ptyz1': device_add [ 16.105838] PM: Adding info for No Bus:ptyz1 [ 16.110220] device: 'ptyz2': device_add [ 16.114099] PM: Adding info for No Bus:ptyz2 [ 16.118479] device: 'ptyz3': device_add [ 16.122364] PM: Adding info for No Bus:ptyz3 [ 16.126745] device: 'ptyz4': device_add [ 16.130623] PM: Adding info for No Bus:ptyz4 [ 16.135003] device: 'ptyz5': device_add [ 16.138882] PM: Adding info for No Bus:ptyz5 [ 16.143262] device: 'ptyz6': device_add [ 16.147140] PM: Adding info for No Bus:ptyz6 [ 16.151521] device: 'ptyz7': device_add [ 16.155406] PM: Adding info for No Bus:ptyz7 [ 16.159787] device: 'ptyz8': device_add [ 16.163665] PM: Adding info for No Bus:ptyz8 [ 16.168045] device: 'ptyz9': device_add [ 16.171923] PM: Adding info for No Bus:ptyz9 [ 16.176304] device: 'ptyza': device_add [ 16.180188] PM: Adding info for No Bus:ptyza [ 16.184569] device: 'ptyzb': device_add [ 16.188448] PM: Adding info for No Bus:ptyzb [ 16.192829] device: 'ptyzc': device_add [ 16.196707] PM: Adding info for No Bus:ptyzc [ 16.201087] device: 'ptyzd': device_add [ 16.204966] PM: Adding info for No Bus:ptyzd [ 16.209363] device: 'ptyze': device_add [ 16.213257] PM: Adding info for No Bus:ptyze [ 16.217638] device: 'ptyzf': device_add [ 16.221521] PM: Adding info for No Bus:ptyzf [ 16.225903] device: 'ptya0': device_add [ 16.229782] PM: Adding info for No Bus:ptya0 [ 16.234162] device: 'ptya1': device_add [ 16.238041] PM: Adding info for No Bus:ptya1 [ 16.242422] device: 'ptya2': device_add [ 16.246307] PM: Adding info for No Bus:ptya2 [ 16.250689] device: 'ptya3': device_add [ 16.254571] PM: Adding info for No Bus:ptya3 [ 16.258952] device: 'ptya4': device_add [ 16.262831] PM: Adding info for No Bus:ptya4 [ 16.267212] device: 'ptya5': device_add [ 16.271096] PM: Adding info for No Bus:ptya5 [ 16.275477] device: 'ptya6': device_add [ 16.279357] PM: Adding info for No Bus:ptya6 [ 16.283737] device: 'ptya7': device_add [ 16.287616] PM: Adding info for No Bus:ptya7 [ 16.291997] device: 'ptya8': device_add [ 16.295876] PM: Adding info for No Bus:ptya8 [ 16.300257] device: 'ptya9': device_add [ 16.304142] PM: Adding info for No Bus:ptya9 [ 16.308523] device: 'ptyaa': device_add [ 16.312403] PM: Adding info for No Bus:ptyaa [ 16.316784] device: 'ptyab': device_add [ 16.320673] PM: Adding info for No Bus:ptyab [ 16.325052] device: 'ptyac': device_add [ 16.328932] PM: Adding info for No Bus:ptyac [ 16.333312] device: 'ptyad': device_add [ 16.337198] PM: Adding info for No Bus:ptyad [ 16.341580] device: 'ptyae': device_add [ 16.345459] PM: Adding info for No Bus:ptyae [ 16.349839] device: 'ptyaf': device_add [ 16.353719] PM: Adding info for No Bus:ptyaf [ 16.358099] device: 'ptyb0': device_add [ 16.361979] PM: Adding info for No Bus:ptyb0 [ 16.366360] device: 'ptyb1': device_add [ 16.370254] PM: Adding info for No Bus:ptyb1 [ 16.374635] device: 'ptyb2': device_add [ 16.378515] PM: Adding info for No Bus:ptyb2 [ 16.382895] device: 'ptyb3': device_add [ 16.386775] PM: Adding info for No Bus:ptyb3 [ 16.391155] device: 'ptyb4': device_add [ 16.395042] PM: Adding info for No Bus:ptyb4 [ 16.399422] device: 'ptyb5': device_add [ 16.403303] PM: Adding info for No Bus:ptyb5 [ 16.407684] device: 'ptyb6': device_add [ 16.411563] PM: Adding info for No Bus:ptyb6 [ 16.415944] device: 'ptyb7': device_add [ 16.419824] PM: Adding info for No Bus:ptyb7 [ 16.424204] device: 'ptyb8': device_add [ 16.428102] PM: Adding info for No Bus:ptyb8 [ 16.432483] device: 'ptyb9': device_add [ 16.436363] PM: Adding info for No Bus:ptyb9 [ 16.440744] device: 'ptyba': device_add [ 16.444618] PM: Adding info for No Bus:ptyba [ 16.449020] device: 'ptybb': device_add [ 16.452901] PM: Adding info for No Bus:ptybb [ 16.457283] device: 'ptybc': device_add [ 16.461169] PM: Adding info for No Bus:ptybc [ 16.465552] device: 'ptybd': device_add [ 16.469432] PM: Adding info for No Bus:ptybd [ 16.473813] device: 'ptybe': device_add [ 16.477692] PM: Adding info for No Bus:ptybe [ 16.482073] device: 'ptybf': device_add [ 16.485959] PM: Adding info for No Bus:ptybf [ 16.490339] device: 'ptyc0': device_add [ 16.494220] PM: Adding info for No Bus:ptyc0 [ 16.498601] device: 'ptyc1': device_add [ 16.505036] PM: Adding info for No Bus:ptyc1 [ 16.509418] device: 'ptyc2': device_add [ 16.513298] PM: Adding info for No Bus:ptyc2 [ 16.517679] device: 'ptyc3': device_add [ 16.521566] PM: Adding info for No Bus:ptyc3 [ 16.525947] device: 'ptyc4': device_add [ 16.529837] PM: Adding info for No Bus:ptyc4 [ 16.534218] device: 'ptyc5': device_add [ 16.538098] PM: Adding info for No Bus:ptyc5 [ 16.542479] device: 'ptyc6': device_add [ 16.546359] PM: Adding info for No Bus:ptyc6 [ 16.550739] device: 'ptyc7': device_add [ 16.554627] PM: Adding info for No Bus:ptyc7 [ 16.559008] device: 'ptyc8': device_add [ 16.562888] PM: Adding info for No Bus:ptyc8 [ 16.567269] device: 'ptyc9': device_add [ 16.571149] PM: Adding info for No Bus:ptyc9 [ 16.575530] device: 'ptyca': device_add [ 16.579410] PM: Adding info for No Bus:ptyca [ 16.583790] device: 'ptycb': device_add [ 16.587678] PM: Adding info for No Bus:ptycb [ 16.592059] device: 'ptycc': device_add [ 16.595939] PM: Adding info for No Bus:ptycc [ 16.600320] device: 'ptycd': device_add [ 16.604200] PM: Adding info for No Bus:ptycd [ 16.608581] device: 'ptyce': device_add [ 16.612467] PM: Adding info for No Bus:ptyce [ 16.616849] device: 'ptycf': device_add [ 16.620730] PM: Adding info for No Bus:ptycf [ 16.625109] device: 'ptyd0': device_add [ 16.628989] PM: Adding info for No Bus:ptyd0 [ 16.633370] device: 'ptyd1': device_add [ 16.637260] PM: Adding info for No Bus:ptyd1 [ 16.641641] device: 'ptyd2': device_add [ 16.645529] PM: Adding info for No Bus:ptyd2 [ 16.649910] device: 'ptyd3': device_add [ 16.653790] PM: Adding info for No Bus:ptyd3 [ 16.658171] device: 'ptyd4': device_add [ 16.662052] PM: Adding info for No Bus:ptyd4 [ 16.666433] device: 'ptyd5': device_add [ 16.670314] PM: Adding info for No Bus:ptyd5 [ 16.674694] device: 'ptyd6': device_add [ 16.678582] PM: Adding info for No Bus:ptyd6 [ 16.682962] device: 'ptyd7': device_add [ 16.686843] PM: Adding info for No Bus:ptyd7 [ 16.691241] device: 'ptyd8': device_add [ 16.695123] PM: Adding info for No Bus:ptyd8 [ 16.699504] device: 'ptyd9': device_add [ 16.703391] PM: Adding info for No Bus:ptyd9 [ 16.707772] device: 'ptyda': device_add [ 16.711654] PM: Adding info for No Bus:ptyda [ 16.716034] device: 'ptydb': device_add [ 16.719915] PM: Adding info for No Bus:ptydb [ 16.724296] device: 'ptydc': device_add [ 16.728177] PM: Adding info for No Bus:ptydc [ 16.732558] device: 'ptydd': device_add [ 16.736445] PM: Adding info for No Bus:ptydd [ 16.740826] device: 'ptyde': device_add [ 16.744717] PM: Adding info for No Bus:ptyde [ 16.749096] device: 'ptydf': device_add [ 16.752986] PM: Adding info for No Bus:ptydf [ 16.757367] device: 'ptye0': device_add [ 16.761248] PM: Adding info for No Bus:ptye0 [ 16.765630] device: 'ptye1': device_add [ 16.769518] PM: Adding info for No Bus:ptye1 [ 16.773900] device: 'ptye2': device_add [ 16.777781] PM: Adding info for No Bus:ptye2 [ 16.782161] device: 'ptye3': device_add [ 16.786042] PM: Adding info for No Bus:ptye3 [ 16.790423] device: 'ptye4': device_add [ 16.794304] PM: Adding info for No Bus:ptye4 [ 16.798686] device: 'ptye5': device_add [ 16.802574] PM: Adding info for No Bus:ptye5 [ 16.806954] device: 'ptye6': device_add [ 16.810836] PM: Adding info for No Bus:ptye6 [ 16.815216] device: 'ptye7': device_add [ 16.819097] PM: Adding info for No Bus:ptye7 [ 16.823479] device: 'ptye8': device_add [ 16.827367] PM: Adding info for No Bus:ptye8 [ 16.831748] device: 'ptye9': device_add [ 16.835630] PM: Adding info for No Bus:ptye9 [ 16.840010] device: 'ptyea': device_add [ 16.843891] PM: Adding info for No Bus:ptyea [ 16.848272] device: 'ptyeb': device_add [ 16.852163] PM: Adding info for No Bus:ptyeb [ 16.856544] device: 'ptyec': device_add [ 16.860432] PM: Adding info for No Bus:ptyec [ 16.864813] device: 'ptyed': device_add [ 16.868694] PM: Adding info for No Bus:ptyed [ 16.873076] device: 'ptyee': device_add [ 16.876957] PM: Adding info for No Bus:ptyee [ 16.881338] device: 'ptyef': device_add [ 16.885219] PM: Adding info for No Bus:ptyef [ 16.889608] device: 'ttyp0': device_add [ 16.893495] PM: Adding info for No Bus:ttyp0 [ 16.897876] device: 'ttyp1': device_add [ 16.901756] PM: Adding info for No Bus:ttyp1 [ 16.906136] device: 'ttyp2': device_add [ 16.910015] PM: Adding info for No Bus:ttyp2 [ 16.914396] device: 'ttyp3': device_add [ 16.918281] PM: Adding info for No Bus:ttyp3 [ 16.922662] device: 'ttyp4': device_add [ 16.926542] PM: Adding info for No Bus:ttyp4 [ 16.930940] device: 'ttyp5': device_add [ 16.934820] PM: Adding info for No Bus:ttyp5 [ 16.939201] device: 'ttyp6': device_add [ 16.943080] PM: Adding info for No Bus:ttyp6 [ 16.947461] device: 'ttyp7': device_add [ 16.951355] PM: Adding info for No Bus:ttyp7 [ 16.955735] device: 'ttyp8': device_add [ 16.959615] PM: Adding info for No Bus:ttyp8 [ 16.963996] device: 'ttyp9': device_add [ 16.967888] PM: Adding info for No Bus:ttyp9 [ 16.972275] device: 'ttypa': device_add [ 16.976162] PM: Adding info for No Bus:ttypa [ 16.980544] device: 'ttypb': device_add [ 16.984433] PM: Adding info for No Bus:ttypb [ 16.988815] device: 'ttypc': device_add [ 16.992695] PM: Adding info for No Bus:ttypc [ 16.997077] device: 'ttypd': device_add [ 17.000956] PM: Adding info for No Bus:ttypd [ 17.005337] device: 'ttype': device_add [ 17.009217] PM: Adding info for No Bus:ttype [ 17.013601] device: 'ttypf': device_add [ 17.017488] PM: Adding info for No Bus:ttypf [ 17.021870] device: 'ttyq0': device_add [ 17.025750] PM: Adding info for No Bus:ttyq0 [ 17.030133] device: 'ttyq1': device_add [ 17.034012] PM: Adding info for No Bus:ttyq1 [ 17.038393] device: 'ttyq2': device_add [ 17.042279] PM: Adding info for No Bus:ttyq2 [ 17.046660] device: 'ttyq3': device_add [ 17.050541] PM: Adding info for No Bus:ttyq3 [ 17.054923] device: 'ttyq4': device_add [ 17.058811] PM: Adding info for No Bus:ttyq4 [ 17.063193] device: 'ttyq5': device_add [ 17.067073] PM: Adding info for No Bus:ttyq5 [ 17.071454] device: 'ttyq6': device_add [ 17.075340] PM: Adding info for No Bus:ttyq6 [ 17.079722] device: 'ttyq7': device_add [ 17.083602] PM: Adding info for No Bus:ttyq7 [ 17.087983] device: 'ttyq8': device_add [ 17.091862] PM: Adding info for No Bus:ttyq8 [ 17.096243] device: 'ttyq9': device_add [ 17.100123] PM: Adding info for No Bus:ttyq9 [ 17.104505] device: 'ttyqa': device_add [ 17.108394] PM: Adding info for No Bus:ttyqa [ 17.112775] device: 'ttyqb': device_add [ 17.116650] PM: Adding info for No Bus:ttyqb [ 17.121035] device: 'ttyqc': device_add [ 17.124914] PM: Adding info for No Bus:ttyqc [ 17.129297] device: 'ttyqd': device_add [ 17.133191] PM: Adding info for No Bus:ttyqd [ 17.137573] device: 'ttyqe': device_add [ 17.141453] PM: Adding info for No Bus:ttyqe [ 17.145834] device: 'ttyqf': device_add [ 17.149715] PM: Adding info for No Bus:ttyqf [ 17.154096] device: 'ttyr0': device_add [ 17.157976] PM: Adding info for No Bus:ttyr0 [ 17.162357] device: 'ttyr1': device_add [ 17.166252] PM: Adding info for No Bus:ttyr1 [ 17.170651] device: 'ttyr2': device_add [ 17.174532] PM: Adding info for No Bus:ttyr2 [ 17.178914] device: 'ttyr3': device_add [ 17.182794] PM: Adding info for No Bus:ttyr3 [ 17.187175] device: 'ttyr4': device_add [ 17.191056] PM: Adding info for No Bus:ttyr4 [ 17.195438] device: 'ttyr5': device_add [ 17.199325] PM: Adding info for No Bus:ttyr5 [ 17.203707] device: 'ttyr6': device_add [ 17.207587] PM: Adding info for No Bus:ttyr6 [ 17.211968] device: 'ttyr7': device_add [ 17.215849] PM: Adding info for No Bus:ttyr7 [ 17.220230] device: 'ttyr8': device_add [ 17.224115] PM: Adding info for No Bus:ttyr8 [ 17.228497] device: 'ttyr9': device_add [ 17.232384] PM: Adding info for No Bus:ttyr9 [ 17.236768] device: 'ttyra': device_add [ 17.240644] PM: Adding info for No Bus:ttyra [ 17.245029] device: 'ttyrb': device_add [ 17.251462] PM: Adding info for No Bus:ttyrb [ 17.255844] device: 'ttyrc': device_add [ 17.259731] PM: Adding info for No Bus:ttyrc [ 17.264114] device: 'ttyrd': device_add [ 17.267995] PM: Adding info for No Bus:ttyrd [ 17.272376] device: 'ttyre': device_add [ 17.276268] PM: Adding info for No Bus:ttyre [ 17.280651] device: 'ttyrf': device_add [ 17.284531] PM: Adding info for No Bus:ttyrf [ 17.288913] device: 'ttys0': device_add [ 17.292800] PM: Adding info for No Bus:ttys0 [ 17.297180] device: 'ttys1': device_add [ 17.301061] PM: Adding info for No Bus:ttys1 [ 17.305442] device: 'ttys2': device_add [ 17.309322] PM: Adding info for No Bus:ttys2 [ 17.313703] device: 'ttys3': device_add [ 17.317585] PM: Adding info for No Bus:ttys3 [ 17.321966] device: 'ttys4': device_add [ 17.325854] PM: Adding info for No Bus:ttys4 [ 17.330235] device: 'ttys5': device_add [ 17.334116] PM: Adding info for No Bus:ttys5 [ 17.338497] device: 'ttys6': device_add [ 17.342378] PM: Adding info for No Bus:ttys6 [ 17.346759] device: 'ttys7': device_add [ 17.350646] PM: Adding info for No Bus:ttys7 [ 17.355028] device: 'ttys8': device_add [ 17.358909] PM: Adding info for No Bus:ttys8 [ 17.363290] device: 'ttys9': device_add [ 17.367171] PM: Adding info for No Bus:ttys9 [ 17.371553] device: 'ttysa': device_add [ 17.375442] PM: Adding info for No Bus:ttysa [ 17.379824] device: 'ttysb': device_add [ 17.383712] PM: Adding info for No Bus:ttysb [ 17.388093] device: 'ttysc': device_add [ 17.391975] PM: Adding info for No Bus:ttysc [ 17.396356] device: 'ttysd': device_add [ 17.400237] PM: Adding info for No Bus:ttysd [ 17.404618] device: 'ttyse': device_add [ 17.408499] PM: Adding info for No Bus:ttyse [ 17.412898] device: 'ttysf': device_add [ 17.416786] PM: Adding info for No Bus:ttysf [ 17.421165] device: 'ttyt0': device_add [ 17.425046] PM: Adding info for No Bus:ttyt0 [ 17.429427] device: 'ttyt1': device_add [ 17.433308] PM: Adding info for No Bus:ttyt1 [ 17.437689] device: 'ttyt2': device_add [ 17.441570] PM: Adding info for No Bus:ttyt2 [ 17.445951] device: 'ttyt3': device_add [ 17.449840] PM: Adding info for No Bus:ttyt3 [ 17.454221] device: 'ttyt4': device_add [ 17.458103] PM: Adding info for No Bus:ttyt4 [ 17.462484] device: 'ttyt5': device_add [ 17.466366] PM: Adding info for No Bus:ttyt5 [ 17.470747] device: 'ttyt6': device_add [ 17.474634] PM: Adding info for No Bus:ttyt6 [ 17.479016] device: 'ttyt7': device_add [ 17.482907] PM: Adding info for No Bus:ttyt7 [ 17.487289] device: 'ttyt8': device_add [ 17.491170] PM: Adding info for No Bus:ttyt8 [ 17.495551] device: 'ttyt9': device_add [ 17.499433] PM: Adding info for No Bus:ttyt9 [ 17.503814] device: 'ttyta': device_add [ 17.507703] PM: Adding info for No Bus:ttyta [ 17.512085] device: 'ttytb': device_add [ 17.515975] PM: Adding info for No Bus:ttytb [ 17.520357] device: 'ttytc': device_add [ 17.524239] PM: Adding info for No Bus:ttytc [ 17.528620] device: 'ttytd': device_add [ 17.532505] PM: Adding info for No Bus:ttytd [ 17.536887] device: 'ttyte': device_add [ 17.540775] PM: Adding info for No Bus:ttyte [ 17.545156] device: 'ttytf': device_add [ 17.549038] PM: Adding info for No Bus:ttytf [ 17.553418] device: 'ttyu0': device_add [ 17.557300] PM: Adding info for No Bus:ttyu0 [ 17.561681] device: 'ttyu1': device_add [ 17.565569] PM: Adding info for No Bus:ttyu1 [ 17.569951] device: 'ttyu2': device_add [ 17.573833] PM: Adding info for No Bus:ttyu2 [ 17.578215] device: 'ttyu3': device_add [ 17.582097] PM: Adding info for No Bus:ttyu3 [ 17.586478] device: 'ttyu4': device_add [ 17.590369] PM: Adding info for No Bus:ttyu4 [ 17.594750] device: 'ttyu5': device_add [ 17.598639] PM: Adding info for No Bus:ttyu5 [ 17.603020] device: 'ttyu6': device_add [ 17.606902] PM: Adding info for No Bus:ttyu6 [ 17.611284] device: 'ttyu7': device_add [ 17.615166] PM: Adding info for No Bus:ttyu7 [ 17.619547] device: 'ttyu8': device_add [ 17.623429] PM: Adding info for No Bus:ttyu8 [ 17.627810] device: 'ttyu9': device_add [ 17.631698] PM: Adding info for No Bus:ttyu9 [ 17.636080] device: 'ttyua': device_add [ 17.639962] PM: Adding info for No Bus:ttyua [ 17.644343] device: 'ttyub': device_add [ 17.648225] PM: Adding info for No Bus:ttyub [ 17.652624] device: 'ttyuc': device_add [ 17.656507] PM: Adding info for No Bus:ttyuc [ 17.660889] device: 'ttyud': device_add [ 17.664778] PM: Adding info for No Bus:ttyud [ 17.669158] device: 'ttyue': device_add [ 17.673041] PM: Adding info for No Bus:ttyue [ 17.677422] device: 'ttyuf': device_add [ 17.681304] PM: Adding info for No Bus:ttyuf [ 17.685685] device: 'ttyv0': device_add [ 17.689574] PM: Adding info for No Bus:ttyv0 [ 17.693955] device: 'ttyv1': device_add [ 17.697847] PM: Adding info for No Bus:ttyv1 [ 17.702229] device: 'ttyv2': device_add [ 17.706111] PM: Adding info for No Bus:ttyv2 [ 17.710492] device: 'ttyv3': device_add [ 17.714375] PM: Adding info for No Bus:ttyv3 [ 17.718756] device: 'ttyv4': device_add [ 17.722645] PM: Adding info for No Bus:ttyv4 [ 17.727027] device: 'ttyv5': device_add [ 17.730910] PM: Adding info for No Bus:ttyv5 [ 17.735291] device: 'ttyv6': device_add [ 17.739174] PM: Adding info for No Bus:ttyv6 [ 17.743555] device: 'ttyv7': device_add [ 17.747438] PM: Adding info for No Bus:ttyv7 [ 17.751819] device: 'ttyv8': device_add [ 17.755708] PM: Adding info for No Bus:ttyv8 [ 17.760090] device: 'ttyv9': device_add [ 17.763973] PM: Adding info for No Bus:ttyv9 [ 17.768354] device: 'ttyva': device_add [ 17.772236] PM: Adding info for No Bus:ttyva [ 17.776617] device: 'ttyvb': device_add [ 17.780507] PM: Adding info for No Bus:ttyvb [ 17.784888] device: 'ttyvc': device_add [ 17.788775] PM: Adding info for No Bus:ttyvc [ 17.793155] device: 'ttyvd': device_add [ 17.797050] PM: Adding info for No Bus:ttyvd [ 17.801432] device: 'ttyve': device_add [ 17.805315] PM: Adding info for No Bus:ttyve [ 17.809697] device: 'ttyvf': device_add [ 17.813586] PM: Adding info for No Bus:ttyvf [ 17.817967] device: 'ttyw0': device_add [ 17.821851] PM: Adding info for No Bus:ttyw0 [ 17.826233] device: 'ttyw1': device_add [ 17.830116] PM: Adding info for No Bus:ttyw1 [ 17.834497] device: 'ttyw2': device_add [ 17.838381] PM: Adding info for No Bus:ttyw2 [ 17.842763] device: 'ttyw3': device_add [ 17.846653] PM: Adding info for No Bus:ttyw3 [ 17.851034] device: 'ttyw4': device_add [ 17.854917] PM: Adding info for No Bus:ttyw4 [ 17.859298] device: 'ttyw5': device_add [ 17.863182] PM: Adding info for No Bus:ttyw5 [ 17.867564] device: 'ttyw6': device_add [ 17.871447] PM: Adding info for No Bus:ttyw6 [ 17.875828] device: 'ttyw7': device_add [ 17.879719] PM: Adding info for No Bus:ttyw7 [ 17.884100] device: 'ttyw8': device_add [ 17.887983] PM: Adding info for No Bus:ttyw8 [ 17.892382] device: 'ttyw9': device_add [ 17.896274] PM: Adding info for No Bus:ttyw9 [ 17.900656] device: 'ttywa': device_add [ 17.904555] PM: Adding info for No Bus:ttywa [ 17.908937] device: 'ttywb': device_add [ 17.912822] PM: Adding info for No Bus:ttywb [ 17.917202] device: 'ttywc': device_add [ 17.921085] PM: Adding info for No Bus:ttywc [ 17.925467] device: 'ttywd': device_add [ 17.929351] PM: Adding info for No Bus:ttywd [ 17.933732] device: 'ttywe': device_add [ 17.937622] PM: Adding info for No Bus:ttywe [ 17.942004] device: 'ttywf': device_add [ 17.945888] PM: Adding info for No Bus:ttywf [ 17.950269] device: 'ttyx0': device_add [ 17.954153] PM: Adding info for No Bus:ttyx0 [ 17.958534] device: 'ttyx1': device_add [ 17.962418] PM: Adding info for No Bus:ttyx1 [ 17.966800] device: 'ttyx2': device_add [ 17.970690] PM: Adding info for No Bus:ttyx2 [ 17.975072] device: 'ttyx3': device_add [ 17.978956] PM: Adding info for No Bus:ttyx3 [ 17.983337] device: 'ttyx4': device_add [ 17.987221] PM: Adding info for No Bus:ttyx4 [ 17.991603] device: 'ttyx5': device_add [ 17.998048] PM: Adding info for No Bus:ttyx5 [ 18.002430] device: 'ttyx6': device_add [ 18.006314] PM: Adding info for No Bus:ttyx6 [ 18.010695] device: 'ttyx7': device_add [ 18.014589] PM: Adding info for No Bus:ttyx7 [ 18.018971] device: 'ttyx8': device_add [ 18.022854] PM: Adding info for No Bus:ttyx8 [ 18.027236] device: 'ttyx9': device_add [ 18.031126] PM: Adding info for No Bus:ttyx9 [ 18.035507] device: 'ttyxa': device_add [ 18.039395] PM: Adding info for No Bus:ttyxa [ 18.043777] device: 'ttyxb': device_add [ 18.047664] PM: Adding info for No Bus:ttyxb [ 18.052045] device: 'ttyxc': device_add [ 18.055930] PM: Adding info for No Bus:ttyxc [ 18.060311] device: 'ttyxd': device_add [ 18.064202] PM: Adding info for No Bus:ttyxd [ 18.068584] device: 'ttyxe': device_add [ 18.072468] PM: Adding info for No Bus:ttyxe [ 18.076850] device: 'ttyxf': device_add [ 18.080729] PM: Adding info for No Bus:ttyxf [ 18.085114] device: 'ttyy0': device_add [ 18.088998] PM: Adding info for No Bus:ttyy0 [ 18.093380] device: 'ttyy1': device_add [ 18.097272] PM: Adding info for No Bus:ttyy1 [ 18.101653] device: 'ttyy2': device_add [ 18.105550] PM: Adding info for No Bus:ttyy2 [ 18.109931] device: 'ttyy3': device_add [ 18.113822] PM: Adding info for No Bus:ttyy3 [ 18.118204] device: 'ttyy4': device_add [ 18.122109] PM: Adding info for No Bus:ttyy4 [ 18.126490] device: 'ttyy5': device_add [ 18.130375] PM: Adding info for No Bus:ttyy5 [ 18.134774] device: 'ttyy6': device_add [ 18.138660] PM: Adding info for No Bus:ttyy6 [ 18.143042] device: 'ttyy7': device_add [ 18.146927] PM: Adding info for No Bus:ttyy7 [ 18.151308] device: 'ttyy8': device_add [ 18.155199] PM: Adding info for No Bus:ttyy8 [ 18.159581] device: 'ttyy9': device_add [ 18.163466] PM: Adding info for No Bus:ttyy9 [ 18.167848] device: 'ttyya': device_add [ 18.171733] PM: Adding info for No Bus:ttyya [ 18.176114] device: 'ttyyb': device_add [ 18.179998] PM: Adding info for No Bus:ttyyb [ 18.184379] device: 'ttyyc': device_add [ 18.188270] PM: Adding info for No Bus:ttyyc [ 18.192652] device: 'ttyyd': device_add [ 18.196537] PM: Adding info for No Bus:ttyyd [ 18.200919] device: 'ttyye': device_add [ 18.204803] PM: Adding info for No Bus:ttyye [ 18.209183] device: 'ttyyf': device_add [ 18.213074] PM: Adding info for No Bus:ttyyf [ 18.217456] device: 'ttyz0': device_add [ 18.221350] PM: Adding info for No Bus:ttyz0 [ 18.225731] device: 'ttyz1': device_add [ 18.229622] PM: Adding info for No Bus:ttyz1 [ 18.234004] device: 'ttyz2': device_add [ 18.237889] PM: Adding info for No Bus:ttyz2 [ 18.242270] device: 'ttyz3': device_add [ 18.246159] PM: Adding info for No Bus:ttyz3 [ 18.250541] device: 'ttyz4': device_add [ 18.254426] PM: Adding info for No Bus:ttyz4 [ 18.258808] device: 'ttyz5': device_add [ 18.262693] PM: Adding info for No Bus:ttyz5 [ 18.267074] device: 'ttyz6': device_add [ 18.270959] PM: Adding info for No Bus:ttyz6 [ 18.275341] device: 'ttyz7': device_add [ 18.279241] PM: Adding info for No Bus:ttyz7 [ 18.283622] device: 'ttyz8': device_add [ 18.287508] PM: Adding info for No Bus:ttyz8 [ 18.291889] device: 'ttyz9': device_add [ 18.295774] PM: Adding info for No Bus:ttyz9 [ 18.300156] device: 'ttyza': device_add [ 18.304041] PM: Adding info for No Bus:ttyza [ 18.308423] device: 'ttyzb': device_add [ 18.312314] PM: Adding info for No Bus:ttyzb [ 18.316696] device: 'ttyzc': device_add [ 18.320581] PM: Adding info for No Bus:ttyzc [ 18.324962] device: 'ttyzd': device_add [ 18.328857] PM: Adding info for No Bus:ttyzd [ 18.333237] device: 'ttyze': device_add [ 18.337129] PM: Adding info for No Bus:ttyze [ 18.341510] device: 'ttyzf': device_add [ 18.345396] PM: Adding info for No Bus:ttyzf [ 18.349777] device: 'ttya0': device_add [ 18.353662] PM: Adding info for No Bus:ttya0 [ 18.358043] device: 'ttya1': device_add [ 18.361929] PM: Adding info for No Bus:ttya1 [ 18.366310] device: 'ttya2': device_add [ 18.370202] PM: Adding info for No Bus:ttya2 [ 18.374602] device: 'ttya3': device_add [ 18.378488] PM: Adding info for No Bus:ttya3 [ 18.382870] device: 'ttya4': device_add [ 18.386756] PM: Adding info for No Bus:ttya4 [ 18.391136] device: 'ttya5': device_add [ 18.395023] PM: Adding info for No Bus:ttya5 [ 18.399404] device: 'ttya6': device_add [ 18.403296] PM: Adding info for No Bus:ttya6 [ 18.407678] device: 'ttya7': device_add [ 18.411564] PM: Adding info for No Bus:ttya7 [ 18.415945] device: 'ttya8': device_add [ 18.419830] PM: Adding info for No Bus:ttya8 [ 18.424212] device: 'ttya9': device_add [ 18.428104] PM: Adding info for No Bus:ttya9 [ 18.432485] device: 'ttyaa': device_add [ 18.436381] PM: Adding info for No Bus:ttyaa [ 18.440765] device: 'ttyab': device_add [ 18.444645] PM: Adding info for No Bus:ttyab [ 18.449028] device: 'ttyac': device_add [ 18.452914] PM: Adding info for No Bus:ttyac [ 18.457296] device: 'ttyad': device_add [ 18.461188] PM: Adding info for No Bus:ttyad [ 18.465569] device: 'ttyae': device_add [ 18.469456] PM: Adding info for No Bus:ttyae [ 18.473837] device: 'ttyaf': device_add [ 18.477723] PM: Adding info for No Bus:ttyaf [ 18.482104] device: 'ttyb0': device_add [ 18.485990] PM: Adding info for No Bus:ttyb0 [ 18.490372] device: 'ttyb1': device_add [ 18.494268] PM: Adding info for No Bus:ttyb1 [ 18.498650] device: 'ttyb2': device_add [ 18.502538] PM: Adding info for No Bus:ttyb2 [ 18.506919] device: 'ttyb3': device_add [ 18.510806] PM: Adding info for No Bus:ttyb3 [ 18.515187] device: 'ttyb4': device_add [ 18.519073] PM: Adding info for No Bus:ttyb4 [ 18.523454] device: 'ttyb5': device_add [ 18.527347] PM: Adding info for No Bus:ttyb5 [ 18.531729] device: 'ttyb6': device_add [ 18.535615] PM: Adding info for No Bus:ttyb6 [ 18.539996] device: 'ttyb7': device_add [ 18.543891] PM: Adding info for No Bus:ttyb7 [ 18.548273] device: 'ttyb8': device_add [ 18.552166] PM: Adding info for No Bus:ttyb8 [ 18.556548] device: 'ttyb9': device_add [ 18.560436] PM: Adding info for No Bus:ttyb9 [ 18.564821] device: 'ttyba': device_add [ 18.568702] PM: Adding info for No Bus:ttyba [ 18.573085] device: 'ttybb': device_add [ 18.576971] PM: Adding info for No Bus:ttybb [ 18.581352] device: 'ttybc': device_add [ 18.585245] PM: Adding info for No Bus:ttybc [ 18.589627] device: 'ttybd': device_add [ 18.593513] PM: Adding info for No Bus:ttybd [ 18.597894] device: 'ttybe': device_add [ 18.601781] PM: Adding info for No Bus:ttybe [ 18.606162] device: 'ttybf': device_add [ 18.610048] PM: Adding info for No Bus:ttybf [ 18.614446] device: 'ttyc0': device_add [ 18.618341] PM: Adding info for No Bus:ttyc0 [ 18.622723] device: 'ttyc1': device_add [ 18.626610] PM: Adding info for No Bus:ttyc1 [ 18.630990] device: 'ttyc2': device_add [ 18.634877] PM: Adding info for No Bus:ttyc2 [ 18.639258] device: 'ttyc3': device_add [ 18.643159] PM: Adding info for No Bus:ttyc3 [ 18.647540] device: 'ttyc4': device_add [ 18.651427] PM: Adding info for No Bus:ttyc4 [ 18.655808] device: 'ttyc5': device_add [ 18.659703] PM: Adding info for No Bus:ttyc5 [ 18.664085] device: 'ttyc6': device_add [ 18.667972] PM: Adding info for No Bus:ttyc6 [ 18.672353] device: 'ttyc7': device_add [ 18.676246] PM: Adding info for No Bus:ttyc7 [ 18.680627] device: 'ttyc8': device_add [ 18.684515] PM: Adding info for No Bus:ttyc8 [ 18.688896] device: 'ttyc9': device_add [ 18.692784] PM: Adding info for No Bus:ttyc9 [ 18.697165] device: 'ttyca': device_add [ 18.701052] PM: Adding info for No Bus:ttyca [ 18.705433] device: 'ttycb': device_add [ 18.709327] PM: Adding info for No Bus:ttycb [ 18.713708] device: 'ttycc': device_add [ 18.717596] PM: Adding info for No Bus:ttycc [ 18.721977] device: 'ttycd': device_add [ 18.725864] PM: Adding info for No Bus:ttycd [ 18.730245] device: 'ttyce': device_add [ 18.734133] PM: Adding info for No Bus:ttyce [ 18.738514] device: 'ttycf': device_add [ 18.744964] PM: Adding info for No Bus:ttycf [ 18.749345] device: 'ttyd0': device_add [ 18.753242] PM: Adding info for No Bus:ttyd0 [ 18.757624] device: 'ttyd1': device_add [ 18.761511] PM: Adding info for No Bus:ttyd1 [ 18.765892] device: 'ttyd2': device_add [ 18.769786] PM: Adding info for No Bus:ttyd2 [ 18.774167] device: 'ttyd3': device_add [ 18.778055] PM: Adding info for No Bus:ttyd3 [ 18.782436] device: 'ttyd4': device_add [ 18.786323] PM: Adding info for No Bus:ttyd4 [ 18.790704] device: 'ttyd5': device_add [ 18.794592] PM: Adding info for No Bus:ttyd5 [ 18.798972] device: 'ttyd6': device_add [ 18.802867] PM: Adding info for No Bus:ttyd6 [ 18.807248] device: 'ttyd7': device_add [ 18.811135] PM: Adding info for No Bus:ttyd7 [ 18.815517] device: 'ttyd8': device_add [ 18.819405] PM: Adding info for No Bus:ttyd8 [ 18.823787] device: 'ttyd9': device_add [ 18.827675] PM: Adding info for No Bus:ttyd9 [ 18.832056] device: 'ttyda': device_add [ 18.835951] PM: Adding info for No Bus:ttyda [ 18.840333] device: 'ttydb': device_add [ 18.844220] PM: Adding info for No Bus:ttydb [ 18.848601] device: 'ttydc': device_add [ 18.852489] PM: Adding info for No Bus:ttydc [ 18.856889] device: 'ttydd': device_add [ 18.860791] PM: Adding info for No Bus:ttydd [ 18.865172] device: 'ttyde': device_add [ 18.869061] PM: Adding info for No Bus:ttyde [ 18.873442] device: 'ttydf': device_add [ 18.877330] PM: Adding info for No Bus:ttydf [ 18.881711] device: 'ttye0': device_add [ 18.885599] PM: Adding info for No Bus:ttye0 [ 18.889980] device: 'ttye1': device_add [ 18.893874] PM: Adding info for No Bus:ttye1 [ 18.898256] device: 'ttye2': device_add [ 18.902144] PM: Adding info for No Bus:ttye2 [ 18.906525] device: 'ttye3': device_add [ 18.910413] PM: Adding info for No Bus:ttye3 [ 18.914794] device: 'ttye4': device_add [ 18.918682] PM: Adding info for No Bus:ttye4 [ 18.923063] device: 'ttye5': device_add [ 18.926958] PM: Adding info for No Bus:ttye5 [ 18.931340] device: 'ttye6': device_add [ 18.935228] PM: Adding info for No Bus:ttye6 [ 18.939609] device: 'ttye7': device_add [ 18.943497] PM: Adding info for No Bus:ttye7 [ 18.947878] device: 'ttye8': device_add [ 18.951766] PM: Adding info for No Bus:ttye8 [ 18.956148] device: 'ttye9': device_add [ 18.960042] PM: Adding info for No Bus:ttye9 [ 18.964423] device: 'ttyea': device_add [ 18.968321] PM: Adding info for No Bus:ttyea [ 18.972703] device: 'ttyeb': device_add [ 18.976591] PM: Adding info for No Bus:ttyeb [ 18.980972] device: 'ttyec': device_add [ 18.984867] PM: Adding info for No Bus:ttyec [ 18.989247] device: 'ttyed': device_add [ 18.993136] PM: Adding info for No Bus:ttyed [ 18.997517] device: 'ttyee': device_add [ 19.001405] PM: Adding info for No Bus:ttyee [ 19.005786] device: 'ttyef': device_add [ 19.009675] PM: Adding info for No Bus:ttyef [ 19.014083] initcall pty_init+0x0/0x462 returned 0 after 4050 msecs [ 19.020397] calling xen_init+0x0/0x87 [ 19.024166] initcall xen_init+0x0/0x87 returned -19 after 0 msecs [ 19.030308] calling raw_init+0x0/0xdd [ 19.034079] device class 'raw': registering [ 19.038380] device: 'rawctl': device_add [ 19.042353] PM: Adding info for No Bus:rawctl [ 19.046851] initcall raw_init+0x0/0xdd returned 0 after 12 msecs [ 19.052911] calling r3964_init+0x0/0x44 [ 19.056849] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 19.062265] initcall r3964_init+0x0/0x44 returned 0 after 5 msecs [ 19.068403] calling hpet_init+0x0/0x6a [ 19.072263] device: 'hpet': device_add [ 19.076054] PM: Adding info for No Bus:hpet [ 19.080354] bus: 'acpi': add driver hpet [ 19.084468] initcall hpet_init+0x0/0x6a returned 0 after 11 msecs [ 19.090612] calling nvram_init+0x0/0x8a [ 19.094554] device: 'nvram': device_add [ 19.098432] PM: Adding info for No Bus:nvram [ 19.102820] Non-volatile memory driver v1.2 [ 19.107020] initcall nvram_init+0x0/0x8a returned 0 after 11 msecs [ 19.113249] calling mod_init+0x0/0xba [ 19.117078] initcall mod_init+0x0/0xba returned -19 after 0 msecs [ 19.123218] calling tlclk_init+0x0/0x1b7 [ 19.127266] telclk_interrup = 0xf non-mcpbl0010 hw. [ 19.132176] initcall tlclk_init+0x0/0x1b7 returned -6 after 4 msecs [ 19.138493] initcall tlclk_init+0x0/0x1b7 returned with error code -6 [ 19.145069] calling agp_init+0x0/0x26 [ 19.148834] Linux agpgart interface v0.103 [ 19.152946] initcall agp_init+0x0/0x26 returned 0 after 3 msecs [ 19.158913] calling agp_intel_init+0x0/0x29 [ 19.163203] bus: 'pci': add driver agpgart-intel [ 19.167981] initcall agp_intel_init+0x0/0x29 returned 0 after 4 msecs [ 19.174470] calling agp_sis_init+0x0/0x29 [ 19.178582] bus: 'pci': add driver agpgart-sis [ 19.183186] initcall agp_sis_init+0x0/0x29 returned 0 after 4 msecs [ 19.189503] calling agp_via_init+0x0/0x29 [ 19.193616] bus: 'pci': add driver agpgart-via [ 19.198209] initcall agp_via_init+0x0/0x29 returned 0 after 4 msecs [ 19.204522] calling hangcheck_init+0x0/0x8a [ 19.208809] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 19.217776] Hangcheck: Using get_cycles(). [ 19.221889] initcall hangcheck_init+0x0/0x8a returned 0 after 12 msecs [ 19.228462] calling init_tis+0x0/0x91 [ 19.232235] pnp: the driver 'tpm_tis' has been registered [ 19.237649] bus: 'pnp': add driver tpm_tis [ 19.241888] initcall init_tis+0x0/0x91 returned 0 after 9 msecs [ 19.247856] calling init_atmel+0x0/0x1cb [ 19.251884] bus: 'platform': add driver tpm_atmel [ 19.256721] bus: 'platform': remove driver tpm_atmel [ 19.261800] driver: 'tpm_atmel': driver_release [ 19.266351] initcall init_atmel+0x0/0x1cb returned -19 after 13 msecs [ 19.272840] calling init_inf+0x0/0x12 [ 19.276603] pnp: the driver 'tpm_inf_pnp' has been registered [ 19.282364] bus: 'pnp': add driver tpm_inf_pnp [ 19.286939] initcall init_inf+0x0/0x12 returned 0 after 9 msecs [ 19.292910] calling cn_proc_init+0x0/0x3d [ 19.297027] initcall cn_proc_init+0x0/0x3d returned 0 after 0 msecs [ 19.303338] calling intelfb_init+0x0/0x24d [ 19.307539] intelfb: intelfb_init [ 19.310871] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets [ 19.321832] intelfb: Version 0.9.5 [ 19.325252] intelfb: intelfb_setup [ 19.328667] intelfb: no options [ 19.331832] bus: 'pci': add driver intelfb [ 19.336076] initcall intelfb_init+0x0/0x24d returned 0 after 27 msecs [ 19.342566] calling serial8250_init+0x0/0x118 [ 19.347025] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 19.353144] Registering platform device 'serial8250'. Parent at platform [ 19.359855] device: 'serial8250': device_add [ 19.364155] bus: 'platform': add device serial8250 [ 19.368974] PM: Adding info for platform:serial8250 [ 19.374048] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 19.380073] device: 'ttyS0': device_add [ 19.383977] PM: Adding info for No Bus:ttyS0 [ 19.388379] device: 'ttyS1': device_add [ 19.392283] PM: Adding info for No Bus:ttyS1 [ 19.396679] device: 'ttyS2': device_add [ 19.400581] PM: Adding info for No Bus:ttyS2 [ 19.404977] device: 'ttyS3': device_add [ 19.408872] PM: Adding info for No Bus:ttyS3 [ 19.413253] bus: 'platform': add driver serial8250 [ 19.418070] bus: 'platform': driver_probe_device: matched device serial8250 with driver serial8250 [ 19.427037] bus: 'platform': really_probe: probing driver serial8250 with device serial8250 [ 19.435402] driver: 'serial8250': driver_bound: bound to device 'serial8250' [ 19.442462] bus: 'platform': really_probe: bound device serial8250 to driver serial8250 [ 19.450576] initcall serial8250_init+0x0/0x118 returned 0 after 98 msecs [ 19.457327] calling serial8250_pnp_init+0x0/0x12 [ 19.462047] pnp: the driver 'serial' has been registered [ 19.467373] bus: 'pnp': add driver serial [ 19.471497] bus: 'pnp': driver_probe_device: matched device 00:0b with driver serial [ 19.479251] bus: 'pnp': really_probe: probing driver serial with device 00:0b [ 19.486495] device: 'ttyS0': device_unregister [ 19.490956] PM: Removing info for No Bus:ttyS0 [ 19.495557] device: 'ttyS0': device_create_release [ 19.500440] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 19.506031] device: 'ttyS0': device_add [ 19.509927] PM: Adding info for No Bus:ttyS0 [ 19.514312] serial 00:0b: driver attached [ 19.518341] driver: '00:0b': driver_bound: bound to device 'serial' [ 19.524619] bus: 'pnp': really_probe: bound device 00:0b to driver serial [ 19.531536] initcall serial8250_pnp_init+0x0/0x12 returned 0 after 66 msecs [ 19.538546] calling serial8250_pci_init+0x0/0x1b [ 19.543266] bus: 'pci': add driver serial [ 19.547437] initcall serial8250_pci_init+0x0/0x1b returned 0 after 3 msecs [ 19.554361] calling jsm_init_module+0x0/0x48 [ 19.558751] bus: 'pci': add driver jsm [ 19.562651] initcall jsm_init_module+0x0/0x48 returned 0 after 3 msecs [ 19.569227] calling init_kgdboc+0x0/0x16 [ 19.575808] initcall init_kgdboc+0x0/0x16 returned 0 after 0 msecs [ 19.582039] calling topology_sysfs_init+0x0/0x48 [ 19.586796] initcall topology_sysfs_init+0x0/0x48 returned 0 after 0 msecs [ 19.593719] calling brd_init+0x0/0x19d [ 19.598128] device: 'ram0': device_add [ 19.601920] PM: Adding info for No Bus:ram0 [ 19.606247] device: '1:0': device_add [ 19.609946] PM: Adding info for No Bus:1:0 [ 19.614170] device: 'ram1': device_add [ 19.617970] PM: Adding info for No Bus:ram1 [ 19.622274] device: '1:1': device_add [ 19.625972] PM: Adding info for No Bus:1:1 [ 19.630190] device: 'ram2': device_add [ 19.633998] PM: Adding info for No Bus:ram2 [ 19.638314] device: '1:2': device_add [ 19.642020] PM: Adding info for No Bus:1:2 [ 19.646252] device: 'ram3': device_add [ 19.650054] PM: Adding info for No Bus:ram3 [ 19.654356] device: '1:3': device_add [ 19.658053] PM: Adding info for No Bus:1:3 [ 19.662271] device: 'ram4': device_add [ 19.666071] PM: Adding info for No Bus:ram4 [ 19.670378] device: '1:4': device_add [ 19.674076] PM: Adding info for No Bus:1:4 [ 19.678293] device: 'ram5': device_add [ 19.682091] PM: Adding info for No Bus:ram5 [ 19.686394] device: '1:5': device_add [ 19.690092] PM: Adding info for No Bus:1:5 [ 19.694310] device: 'ram6': device_add [ 19.698108] PM: Adding info for No Bus:ram6 [ 19.702420] device: '1:6': device_add [ 19.706118] PM: Adding info for No Bus:1:6 [ 19.710335] device: 'ram7': device_add [ 19.714129] PM: Adding info for No Bus:ram7 [ 19.718438] device: '1:7': device_add [ 19.722135] PM: Adding info for No Bus:1:7 [ 19.726352] device: 'ram8': device_add [ 19.730144] PM: Adding info for No Bus:ram8 [ 19.734444] device: '1:8': device_add [ 19.738147] PM: Adding info for No Bus:1:8 [ 19.742365] device: 'ram9': device_add [ 19.746159] PM: Adding info for No Bus:ram9 [ 19.750462] device: '1:9': device_add [ 19.754165] PM: Adding info for No Bus:1:9 [ 19.758392] device: 'ram10': device_add [ 19.762272] PM: Adding info for No Bus:ram10 [ 19.766670] device: '1:10': device_add [ 19.770470] PM: Adding info for No Bus:1:10 [ 19.774787] device: 'ram11': device_add [ 19.778667] PM: Adding info for No Bus:ram11 [ 19.783057] device: '1:11': device_add [ 19.786849] PM: Adding info for No Bus:1:11 [ 19.791156] device: 'ram12': device_add [ 19.795036] PM: Adding info for No Bus:ram12 [ 19.799425] device: '1:12': device_add [ 19.803210] PM: Adding info for No Bus:1:12 [ 19.807523] device: 'ram13': device_add [ 19.811404] PM: Adding info for No Bus:ram13 [ 19.815793] device: '1:13': device_add [ 19.819576] PM: Adding info for No Bus:1:13 [ 19.823882] device: 'ram14': device_add [ 19.827768] PM: Adding info for No Bus:ram14 [ 19.832164] device: '1:14': device_add [ 19.835947] PM: Adding info for No Bus:1:14 [ 19.840254] device: 'ram15': device_add [ 19.844149] PM: Adding info for No Bus:ram15 [ 19.848539] device: '1:15': device_add [ 19.852324] PM: Adding info for No Bus:1:15 [ 19.856631] brd: module loaded [ 19.859705] initcall brd_init+0x0/0x19d returned 0 after 249 msecs [ 19.865934] calling loop_init+0x0/0x1a6 [ 19.870144] device: 'loop0': device_add [ 19.874029] PM: Adding info for No Bus:loop0 [ 19.878419] device: '7:0': device_add [ 19.882117] PM: Adding info for No Bus:7:0 [ 19.886335] device: 'loop1': device_add [ 19.890221] PM: Adding info for No Bus:loop1 [ 19.894610] device: '7:1': device_add [ 19.898308] PM: Adding info for No Bus:7:1 [ 19.902525] device: 'loop2': device_add [ 19.906411] PM: Adding info for No Bus:loop2 [ 19.910801] device: '7:2': device_add [ 19.914498] PM: Adding info for No Bus:7:2 [ 19.918716] device: 'loop3': device_add [ 19.922610] PM: Adding info for No Bus:loop3 [ 19.926998] device: '7:3': device_add [ 19.930696] PM: Adding info for No Bus:7:3 [ 19.934925] device: 'loop4': device_add [ 19.938806] PM: Adding info for No Bus:loop4 [ 19.943201] device: '7:4': device_add [ 19.946899] PM: Adding info for No Bus:7:4 [ 19.951117] device: 'loop5': device_add [ 19.954996] PM: Adding info for No Bus:loop5 [ 19.959409] device: '7:5': device_add [ 19.963113] PM: Adding info for No Bus:7:5 [ 19.967331] device: 'loop6': device_add [ 19.971211] PM: Adding info for No Bus:loop6 [ 19.975600] device: '7:6': device_add [ 19.979304] PM: Adding info for No Bus:7:6 [ 19.983530] device: 'loop7': device_add [ 19.987411] PM: Adding info for No Bus:loop7 [ 19.991808] device: '7:7': device_add [ 19.995512] PM: Adding info for No Bus:7:7 [ 19.999731] loop: module loaded [ 20.002894] initcall loop_init+0x0/0x1a6 returned 0 after 126 msecs [ 20.009209] calling cpqarray_init+0x0/0x264 [ 20.013495] Compaq SMART2 Driver (v 2.6.0) [ 20.017609] bus: 'pci': add driver cpqarray [ 20.021942] initcall cpqarray_init+0x0/0x264 returned 0 after 8 msecs [ 20.028431] calling DAC960_init_module+0x0/0x52 [ 20.033064] bus: 'pci': add driver DAC960 [ 20.037222] device: 'dac960_gam': device_add [ 20.041552] PM: Adding info for No Bus:dac960_gam [ 20.046366] initcall DAC960_init_module+0x0/0x52 returned 0 after 12 msecs [ 20.053292] calling pkt_init+0x0/0x198 [ 20.057196] device class 'pktcdvd': registering [ 20.061856] device: 'pktcdvd': device_add [ 20.065917] PM: Adding info for No Bus:pktcdvd [ 20.070478] initcall pkt_init+0x0/0x198 returned 0 after 12 msecs [ 20.076618] calling mm_init+0x0/0x192 [ 20.080387] bus: 'pci': add driver umem [ 20.084375] MM: desc_per_page = 128 [ 20.087882] initcall mm_init+0x0/0x192 returned 0 after 7 msecs [ 20.093852] calling nbd_init+0x0/0x304 [ 20.098569] nbd: registered device at major 43 [ 20.103032] device: 'nbd0': device_add [ 20.106825] PM: Adding info for No Bus:nbd0 [ 20.111151] device: '43:0': device_add [ 20.114936] PM: Adding info for No Bus:43:0 [ 20.119243] device: 'nbd1': device_add [ 20.123042] PM: Adding info for No Bus:nbd1 [ 20.127370] device: '43:1': device_add [ 20.131155] PM: Adding info for No Bus:43:1 [ 20.135462] device: 'nbd2': device_add [ 20.139269] PM: Adding info for No Bus:nbd2 [ 20.143588] device: '43:2': device_add [ 20.147381] PM: Adding info for No Bus:43:2 [ 20.151685] device: 'nbd3': device_add [ 20.155479] PM: Adding info for No Bus:nbd3 [ 20.159802] device: '43:3': device_add [ 20.163588] PM: Adding info for No Bus:43:3 [ 20.167906] device: 'nbd4': device_add [ 20.171707] PM: Adding info for No Bus:nbd4 [ 20.176027] device: '43:4': device_add [ 20.179811] PM: Adding info for No Bus:43:4 [ 20.184117] device: 'nbd5': device_add [ 20.187915] PM: Adding info for No Bus:nbd5 [ 20.192241] device: '43:5': device_add [ 20.196033] PM: Adding info for No Bus:43:5 [ 20.200337] device: 'nbd6': device_add [ 20.204129] PM: Adding info for No Bus:nbd6 [ 20.208448] device: '43:6': device_add [ 20.212240] PM: Adding info for No Bus:43:6 [ 20.216546] device: 'nbd7': device_add [ 20.220341] PM: Adding info for No Bus:nbd7 [ 20.224665] device: '43:7': device_add [ 20.228448] PM: Adding info for No Bus:43:7 [ 20.232754] device: 'nbd8': device_add [ 20.236555] PM: Adding info for No Bus:nbd8 [ 20.240890] device: '43:8': device_add [ 20.244670] PM: Adding info for No Bus:43:8 [ 20.248974] device: 'nbd9': device_add [ 20.252770] PM: Adding info for No Bus:nbd9 [ 20.257094] device: '43:9': device_add [ 20.260884] PM: Adding info for No Bus:43:9 [ 20.265189] device: 'nbd10': device_add [ 20.269069] PM: Adding info for No Bus:nbd10 [ 20.273481] device: '43:10': device_add [ 20.277353] PM: Adding info for No Bus:43:10 [ 20.281754] device: 'nbd11': device_add [ 20.285635] PM: Adding info for No Bus:nbd11 [ 20.290061] device: '43:11': device_add [ 20.293932] PM: Adding info for No Bus:43:11 [ 20.298336] device: 'nbd12': device_add [ 20.302224] PM: Adding info for No Bus:nbd12 [ 20.306657] device: '43:12': device_add [ 20.310534] PM: Adding info for No Bus:43:12 [ 20.314926] device: 'nbd13': device_add [ 20.318814] PM: Adding info for No Bus:nbd13 [ 20.323220] device: '43:13': device_add [ 20.329653] PM: Adding info for No Bus:43:13 [ 20.334045] device: 'nbd14': device_add [ 20.337925] PM: Adding info for No Bus:nbd14 [ 20.342338] device: '43:14': device_add [ 20.346221] PM: Adding info for No Bus:43:14 [ 20.350614] device: 'nbd15': device_add [ 20.354498] PM: Adding info for No Bus:nbd15 [ 20.358910] device: '43:15': device_add [ 20.362782] PM: Adding info for No Bus:43:15 [ 20.367174] initcall nbd_init+0x0/0x304 returned 0 after 256 msecs [ 20.373404] calling carm_init+0x0/0x1b [ 20.377258] bus: 'pci': add driver sx8 [ 20.381152] initcall carm_init+0x0/0x1b returned 0 after 3 msecs [ 20.387206] calling ub_init+0x0/0x88 [ 20.390889] bus: 'usb': add driver ub [ 20.394690] usbcore: registered new interface driver ub [ 20.399940] initcall ub_init+0x0/0x88 returned 0 after 8 msecs [ 20.405822] calling xlblk_init+0x0/0x7a [ 20.409761] initcall xlblk_init+0x0/0x7a returned -19 after 0 msecs [ 20.416073] calling eeepc_laptop_init+0x0/0x1eb [ 20.420707] bus: 'acpi': add driver Eee PC Hotkey Driver [ 20.426212] bus: 'acpi': remove driver Eee PC Hotkey Driver [ 20.431899] driver: 'Eee PC Hotkey Driver': driver_release [ 20.437401] initcall eeepc_laptop_init+0x0/0x1eb returned -19 after 15 msecs [ 20.444493] calling msi_init+0x0/0x13a [ 20.448348] initcall msi_init+0x0/0x13a returned -19 after 0 msecs [ 20.454577] calling compal_init+0x0/0x118 [ 20.458690] initcall compal_init+0x0/0x118 returned -19 after 0 msecs [ 20.465179] calling hp_wmi_init+0x0/0x152 [ 20.469293] initcall hp_wmi_init+0x0/0x152 returned 0 after 0 msecs [ 20.475604] calling tifm_7xx1_init+0x0/0x1b [ 20.479891] bus: 'pci': add driver tifm_7xx1 [ 20.484309] initcall tifm_7xx1_init+0x0/0x1b returned 0 after 4 msecs [ 20.490798] calling phantom_init+0x0/0x10a [ 20.494999] device class 'phantom': registering [ 20.499647] bus: 'pci': add driver phantom [ 20.503892] Phantom Linux Driver, version n0.9.8, init OK [ 20.509305] initcall phantom_init+0x0/0x10a returned 0 after 13 msecs [ 20.515792] calling ioc4_init+0x0/0x20 [ 20.519646] bus: 'pci': add driver IOC4 [ 20.523629] initcall ioc4_init+0x0/0x20 returned 0 after 3 msecs [ 20.529686] calling thinkpad_acpi_module_init+0x0/0x945 [ 20.535056] initcall thinkpad_acpi_module_init+0x0/0x945 returned -19 after 0 msecs [ 20.542763] calling enclosure_init+0x0/0x19 [ 20.547049] device class 'enclosure': registering [ 20.551867] initcall enclosure_init+0x0/0x19 returned 0 after 4 msecs [ 20.558357] calling init_kgdbts+0x0/0x16 [ 20.562384] initcall init_kgdbts+0x0/0x16 returned 0 after 0 msecs [ 20.568610] calling xp_init+0x0/0x52 [ 20.572290] initcall xp_init+0x0/0x52 returned -19 after 0 msecs [ 20.578344] calling xpc_init+0x0/0x38e [ 20.582198] initcall xpc_init+0x0/0x38e returned -19 after 0 msecs [ 20.588423] calling xpnet_init+0x0/0x1c7 [ 20.592451] initcall xpnet_init+0x0/0x1c7 returned -19 after 0 msecs [ 20.598852] calling gru_init+0x0/0x469 [ 20.602706] initcall gru_init+0x0/0x469 returned 0 after 0 msecs [ 20.608757] calling pasic3_base_init+0x0/0x19 [ 20.613222] bus: 'platform': add driver pasic3 [ 20.617798] bus: 'platform': remove driver pasic3 [ 20.622616] driver: 'pasic3': driver_release [ 20.626906] initcall pasic3_base_init+0x0/0x19 returned -19 after 13 msecs [ 20.633828] calling e1000_init_module+0x0/0x87 [ 20.638374] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI [ 20.644826] Copyright (c) 1999-2006 Intel Corporation. [ 20.649979] bus: 'pci': add driver e1000 [ 20.654058] initcall e1000_init_module+0x0/0x87 returned 0 after 14 msecs [ 20.660893] calling e1000_init_module+0x0/0x6b [ 20.665439] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 [ 20.671543] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 20.677389] bus: 'pci': add driver e1000e [ 20.681445] bus: 'pci': driver_probe_device: matched device 0000:04:00.0 with driver e1000e [ 20.689808] bus: 'pci': really_probe: probing driver e1000e with device 0000:04:00.0 [ 20.697610] vendor=8086 device=27e2 [ 20.701118] e1000e 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.708098] e1000e 0000:04:00.0: setting latency timer to 64 [ 20.827062] device: 'eth0': device_add [ 20.830922] PM: Adding info for No Bus:eth0 [ 20.835279] 0000:04:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:76:ab:6e:84 [ 20.842689] 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 20.849120] 0000:04:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff [ 20.855312] driver: '0000:04:00.0': driver_bound: bound to device 'e1000e' [ 20.862198] bus: 'pci': really_probe: bound device 0000:04:00.0 to driver e1000e [ 20.869729] initcall e1000_init_module+0x0/0x6b returned 0 after 194 msecs [ 20.876649] calling igb_init_module+0x0/0x6d [ 20.881021] Intel(R) Gigabit Ethernet Network Driver - version 1.2.45-k2 [ 20.887731] Copyright (c) 2008 Intel Corporation. [ 20.892451] bus: 'pci': add driver igb [ 20.896348] initcall igb_init_module+0x0/0x6d returned 0 after 14 msecs [ 20.903011] calling ixgbe_init_module+0x0/0x66 [ 20.907556] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.18-k4 [ 20.915396] ixgbe: Copyright (c) 1999-2007 Intel Corporation. [ 20.921155] bus: 'pci': add driver ixgbe [ 20.925222] initcall ixgbe_init_module+0x0/0x66 returned 0 after 16 msecs [ 20.932055] calling ixgb_init_module+0x0/0x4c [ 20.936515] Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 20.943140] Copyright (c) 1999-2008 Intel Corporation. [ 20.948292] bus: 'pci': add driver ixgb [ 20.952275] initcall ixgb_init_module+0x0/0x4c returned 0 after 15 msecs [ 20.959023] calling ipg_init_module+0x0/0x1b [ 20.963395] bus: 'pci': add driver Sundance Technology IPG Triple-Speed Ethernet [ 20.970934] initcall ipg_init_module+0x0/0x1b returned 0 after 7 msecs [ 20.977509] calling cxgb3_init_module+0x0/0x20 [ 20.982055] bus: 'pci': add driver cxgb3 [ 20.986131] initcall cxgb3_init_module+0x0/0x20 returned 0 after 3 msecs [ 20.992876] calling bonding_init+0x0/0x8df [ 20.997076] Ethernet Channel Bonding Driver: v3.3.0 (June 10, 2008) [ 21.003355] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. [ 21.020564] device: 'bond0': device_add [ 21.024509] PM: Adding info for No Bus:bond0 [ 21.028975] initcall bonding_init+0x0/0x8df returned 0 after 30 msecs [ 21.035463] calling atl1_init_module+0x0/0x1b [ 21.039924] bus: 'pci': add driver atl1 [ 21.043909] initcall atl1_init_module+0x0/0x1b returned 0 after 3 msecs [ 21.050571] calling bdx_module_init+0x0/0x9a [ 21.054947] tehuti: Tehuti Networks(R) Network Driver, 7.29.3 [ 21.060705] tehuti: Options: hw_csum [ 21.064384] bus: 'pci': add driver tehuti [ 21.068541] initcall bdx_module_init+0x0/0x9a returned 0 after 12 msecs [ 21.075203] calling rr_init_module+0x0/0x1b [ 21.079490] bus: 'pci': add driver rrunner [ 21.083740] initcall rr_init_module+0x0/0x1b returned 0 after 4 msecs [ 21.090229] calling happy_meal_probe+0x0/0x1b [ 21.094689] bus: 'pci': add driver hme [ 21.098583] initcall happy_meal_probe+0x0/0x1b returned 0 after 3 msecs [ 21.105246] calling vortex_init+0x0/0xad [ 21.109276] bus: 'pci': add driver 3c59x [ 21.113344] initcall vortex_init+0x0/0xad returned 0 after 3 msecs [ 21.119571] calling typhoon_init+0x0/0x1b [ 21.123684] bus: 'pci': add driver typhoon [ 21.127927] initcall typhoon_init+0x0/0x1b returned 0 after 4 msecs [ 21.134242] calling ne2k_pci_init+0x0/0x1b [ 21.138441] bus: 'pci': add driver ne2k-pci [ 21.142772] initcall ne2k_pci_init+0x0/0x1b returned 0 after 4 msecs [ 21.149175] calling pcnet32_init_module+0x0/0x129 [ 21.153980] pcnet32.c:v1.35 21.Apr.2008 [email protected] [ 21.160084] bus: 'pci': add driver pcnet32 [ 21.164332] initcall pcnet32_init_module+0x0/0x129 returned 0 after 9 msecs [ 21.171337] calling eepro100_init_module+0x0/0x1b [ 21.176143] bus: 'pci': add driver eepro100 [ 21.180485] initcall eepro100_init_module+0x0/0x1b returned 0 after 4 msecs [ 21.187493] calling e100_init_module+0x0/0x5d [ 21.191952] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI [ 21.198056] e100: Copyright(c) 1999-2006 Intel Corporation [ 21.203553] bus: 'pci': add driver e100 [ 21.207540] initcall e100_init_module+0x0/0x5d returned 0 after 14 msecs [ 21.214288] calling epic_init+0x0/0x1b [ 21.218141] bus: 'pci': add driver epic100 [ 21.222384] initcall epic_init+0x0/0x1b returned 0 after 4 msecs [ 21.228437] calling sis900_init_module+0x0/0x1b [ 21.233069] bus: 'pci': add driver sis900 [ 21.237224] initcall sis900_init_module+0x0/0x1b returned 0 after 3 msecs [ 21.244062] calling yellowfin_init+0x0/0x1b [ 21.248349] bus: 'pci': add driver yellowfin [ 21.252773] initcall yellowfin_init+0x0/0x1b returned 0 after 4 msecs [ 21.259261] calling natsemi_init_mod+0x0/0x1b [ 21.263721] bus: 'pci': add driver natsemi [ 21.267964] initcall natsemi_init_mod+0x0/0x1b returned 0 after 4 msecs [ 21.274626] calling ns83820_init+0x0/0x29 [ 21.278738] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 21.285536] bus: 'pci': add driver ns83820 [ 21.289777] initcall ns83820_init+0x0/0x29 returned 0 after 10 msecs [ 21.296178] calling tg3_init+0x0/0x1b [ 21.299945] bus: 'pci': add driver tg3 [ 21.303845] initcall tg3_init+0x0/0x1b returned 0 after 3 msecs [ 21.309815] calling bnx2_init+0x0/0x1b [ 21.313668] bus: 'pci': add driver bnx2 [ 21.317651] initcall bnx2_init+0x0/0x1b returned 0 after 3 msecs [ 21.323704] calling sky2_init_module+0x0/0x1b [ 21.328165] bus: 'pci': add driver sky2 [ 21.332156] initcall sky2_init_module+0x0/0x1b returned 0 after 3 msecs [ 21.338818] calling rhine_init+0x0/0x63 [ 21.345314] bus: 'pci': add driver via-rhine [ 21.349730] initcall rhine_init+0x0/0x63 returned 0 after 4 msecs [ 21.355869] calling velocity_init_module+0x0/0x3b [ 21.360675] bus: 'pci': add driver via-velocity [ 21.365348] initcall velocity_init_module+0x0/0x3b returned 0 after 4 msecs [ 21.372354] calling marvell_init+0x0/0x71 [ 21.376467] bus: 'mdio_bus': add driver Marvell 88E1101 [ 21.381809] bus: 'mdio_bus': add driver Marvell 88E1112 [ 21.387153] bus: 'mdio_bus': add driver Marvell 88E1111 [ 21.392494] bus: 'mdio_bus': add driver Marvell 88E1145 [ 21.397845] bus: 'mdio_bus': add driver Marvell 88E1240 [ 21.403187] initcall marvell_init+0x0/0x71 returned 0 after 25 msecs [ 21.409590] calling davicom_init+0x0/0x5d [ 21.413702] bus: 'mdio_bus': add driver Davicom DM9161E [ 21.419043] bus: 'mdio_bus': add driver Davicom DM9161A [ 21.424385] bus: 'mdio_bus': add driver Davicom DM9131 [ 21.429640] initcall davicom_init+0x0/0x5d returned 0 after 15 msecs [ 21.436040] calling cicada_init+0x0/0x3f [ 21.440067] bus: 'mdio_bus': add driver Cicada Cis8204 [ 21.445319] bus: 'mdio_bus': add driver Cicada Cis8201 [ 21.450584] initcall cicada_init+0x0/0x3f returned 0 after 10 msecs [ 21.456898] calling qs6612_init+0x0/0x12 [ 21.460925] bus: 'mdio_bus': add driver QS6612 [ 21.465493] initcall qs6612_init+0x0/0x12 returned 0 after 4 msecs [ 21.471719] calling broadcom_init+0x0/0xbb [ 21.475918] bus: 'mdio_bus': add driver Broadcom BCM5411 [ 21.481345] bus: 'mdio_bus': add driver Broadcom BCM5421 [ 21.486776] bus: 'mdio_bus': add driver Broadcom BCM5461 [ 21.492205] bus: 'mdio_bus': add driver Broadcom BCM5464 [ 21.497636] bus: 'mdio_bus': add driver Broadcom BCM5481 [ 21.503066] bus: 'mdio_bus': add driver Broadcom BCM5482 [ 21.508504] initcall broadcom_init+0x0/0xbb returned 0 after 31 msecs [ 21.514995] calling realtek_init+0x0/0x12 [ 21.519107] bus: 'mdio_bus': add driver RTL821x Gigabit Ethernet [ 21.525240] initcall realtek_init+0x0/0x12 returned 0 after 5 msecs [ 21.531552] calling fixed_mdio_bus_init+0x0/0xa8 [ 21.536274] Registering platform device 'Fixed MDIO bus.0'. Parent at platform [ 21.543509] device: 'Fixed MDIO bus.0': device_add [ 21.548322] bus: 'platform': add device Fixed MDIO bus.0 [ 21.553661] PM: Adding info for platform:Fixed MDIO bus.0 [ 21.559171] Fixed MDIO Bus: probed [ 21.562593] initcall fixed_mdio_bus_init+0x0/0xa8 returned 0 after 25 msecs [ 21.569601] calling hamachi_init+0x0/0x1b [ 21.573714] bus: 'pci': add driver hamachi [ 21.577957] initcall hamachi_init+0x0/0x1b returned 0 after 4 msecs [ 21.584269] calling net_olddevs_init+0x0/0xa0 [ 21.588732] initcall net_olddevs_init+0x0/0xa0 returned 0 after 0 msecs [ 21.595390] calling hp100_module_init+0x0/0x1b [ 21.599937] bus: 'pci': add driver hp100 [ 21.604005] initcall hp100_module_init+0x0/0x1b returned 0 after 3 msecs [ 21.610754] calling b44_init+0x0/0x5c [ 21.614521] bus: 'pci': add driver b44 [ 21.618424] bus: 'ssb': add driver b44 [ 21.622294] initcall b44_init+0x0/0x5c returned 0 after 7 msecs [ 21.628260] calling init_nic+0x0/0x1b [ 21.632028] bus: 'pci': add driver forcedeth [ 21.636447] initcall init_nic+0x0/0x1b returned 0 after 4 msecs [ 21.642420] calling netif_init+0x0/0x6a [ 21.646359] initcall netif_init+0x0/0x6a returned -19 after 0 msecs [ 21.652673] calling dummy_init_module+0x0/0xb5 [ 21.657237] device: 'dummy0': device_add [ 21.661262] PM: Adding info for No Bus:dummy0 [ 21.665756] initcall dummy_init_module+0x0/0xb5 returned 0 after 8 msecs [ 21.672502] calling macvlan_init_module+0x0/0x53 [ 21.677224] initcall macvlan_init_module+0x0/0x53 returned 0 after 0 msecs [ 21.684141] calling cp_init+0x0/0x1b [ 21.687822] bus: 'pci': add driver 8139cp [ 21.691989] initcall cp_init+0x0/0x1b returned 0 after 3 msecs [ 21.697871] calling rtl8139_init_module+0x0/0x1b [ 21.702591] bus: 'pci': add driver 8139too [ 21.706835] initcall rtl8139_init_module+0x0/0x1b returned 0 after 4 msecs [ 21.713757] calling sc92031_init+0x0/0x29 [ 21.717869] Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c [ 21.723800] bus: 'pci': add driver sc92031 [ 21.728042] initcall sc92031_init+0x0/0x29 returned 0 after 9 msecs [ 21.734357] calling eql_init_module+0x0/0x65 [ 21.738728] Equalizer2002: Simon Janes ([email protected]) and David S. Miller ([email protected]) [ 21.747272] device: 'eql': device_add [ 21.751038] PM: Adding info for No Bus:eql [ 21.755288] initcall eql_init_module+0x0/0x65 returned 0 after 15 msecs [ 21.761953] calling tun_init+0x0/0xa0 [ 21.765720] tun: Universal TUN/TAP device driver, 1.6 [ 21.770786] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 21.777003] device: 'tun': device_add [ 21.780739] PM: Adding info for No Bus:tun [ 21.784947] initcall tun_init+0x0/0xa0 returned 0 after 18 msecs [ 21.791003] calling veth_init+0x0/0x1e [ 21.794857] initcall veth_init+0x0/0x1e returned 0 after 0 msecs [ 21.800909] calling rio_init+0x0/0x1b [ 21.804675] bus: 'pci': add driver dl2k [ 21.808658] initcall rio_init+0x0/0x1b returned 0 after 3 msecs [ 21.814628] calling rtl8169_init_module+0x0/0x1b [ 21.819348] bus: 'pci': add driver r8169 [ 21.823424] initcall rtl8169_init_module+0x0/0x1b returned 0 after 3 msecs [ 21.830346] calling amd8111e_init+0x0/0x1b [ 21.834546] bus: 'pci': add driver amd8111e [ 21.838876] initcall amd8111e_init+0x0/0x1b returned 0 after 4 msecs [ 21.845279] calling s2io_starter+0x0/0x1b [ 21.849392] bus: 'pci': add driver S2IO [ 21.853372] initcall s2io_starter+0x0/0x1b returned 0 after 3 msecs [ 21.859684] calling myri10ge_init_module+0x0/0x70 [ 21.864489] myri10ge: Version 1.4.3-1.358 [ 21.868514] bus: 'pci': add driver myri10ge [ 21.872846] initcall myri10ge_init_module+0x0/0x70 returned 0 after 7 msecs [ 21.879851] calling mlx4_init+0x0/0x34 [ 21.883757] bus: 'pci': add driver mlx4_core [ 21.888178] initcall mlx4_init+0x0/0x34 returned 0 after 4 msecs [ 21.894236] calling enc28j60_init+0x0/0x23 [ 21.898438] bus: 'spi': add driver enc28j60 [ 21.902741] initcall enc28j60_init+0x0/0x23 returned 0 after 4 msecs [ 21.909144] calling ipddp_init_module+0x0/0x108 [ 21.913782] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <[email protected]> [ 21.921369] device: 'ipddp0': device_add [ 21.925394] PM: Adding info for No Bus:ipddp0 [ 21.929888] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <[email protected]> [ 21.938685] initcall ipddp_init_module+0x0/0x108 returned 0 after 23 msecs [ 21.945608] calling arcnet_init+0x0/0x5d [ 21.949635] arcnet loaded. [ 21.952360] initcall arcnet_init+0x0/0x5d returned 0 after 2 msecs [ 21.958588] calling arcnet_rfc1201_init+0x0/0x73 [ 21.963306] arcnet: RFC1201 "standard" (`a') encapsulation support loaded. [ 21.970191] initcall arcnet_rfc1201_init+0x0/0x73 returned 0 after 6 msecs [ 21.977112] calling arcnet_rfc1051_init+0x0/0x47 [ 21.981831] arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded. [ 21.989325] initcall arcnet_rfc1051_init+0x0/0x47 returned 0 after 7 msecs [ 21.996243] calling arcnet_raw_init+0x0/0x5f [ 22.000614] arcnet: raw mode (`r') encapsulation support loaded. [ 22.006633] initcall arcnet_raw_init+0x0/0x5f returned 0 after 5 msecs [ 22.013208] calling com90xx_init+0x0/0xeea [ 22.017427] arcnet: COM90xx chipset support [ 22.319635] S3: No ARCnet cards found. [ 22.323406] initcall com90xx_init+0x0/0xeea returned -5 after 291 msecs [ 22.330068] initcall com90xx_init+0x0/0xeea returned with error code -5 [ 22.336815] calling com90io_init+0x0/0x493 [ 22.341022] arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.) [ 22.348256] E-mail me if you actually test this driver, please! [ 22.354186] arc%d: No autoprobe for IO mapped cards; you must specify the base address! [ 22.362291] initcall com90io_init+0x0/0x493 returned -19 after 20 msecs [ 22.368950] calling arc_rimi_init+0x0/0x4b1 [ 22.373241] arcnet: RIM I (entirely mem-mapped) support [ 22.378479] E-mail me if you actually test the RIM I driver, please! [ 22.384842] arc%d: Given: node 00h, shmem 0h, irq 0 [ 22.389820] arc%d: No autoprobe for RIM I; you must specify the shmem and irq! [ 22.397146] initcall arc_rimi_init+0x0/0x4b1 returned -5 after 22 msecs [ 22.403805] initcall arc_rimi_init+0x0/0x4b1 returned with error code -5 [ 22.410644] calling catc_init+0x0/0x39 [ 22.414498] bus: 'usb': add driver catc [ 22.418465] usbcore: registered new interface driver catc [ 22.423880] catc: v2.8 CATC EL1210A NetMate USB Ethernet driver [ 22.429812] initcall catc_init+0x0/0x39 returned 0 after 14 msecs [ 22.435951] calling kaweth_init+0x0/0x30 [ 22.439978] drivers/net/usb/kaweth.c: Driver loading [ 22.444956] bus: 'usb': add driver kaweth [ 22.449102] usbcore: registered new interface driver kaweth [ 22.454692] initcall kaweth_init+0x0/0x30 returned 0 after 14 msecs [ 22.461005] calling pegasus_init+0x0/0x19b [ 22.465206] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 22.472761] bus: 'usb': add driver pegasus [ 22.476988] usbcore: registered new interface driver pegasus [ 22.482663] initcall pegasus_init+0x0/0x19b returned 0 after 16 msecs [ 22.489152] calling usb_rtl8150_init+0x0/0x29 [ 22.493611] rtl8150: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27) [ 22.500496] bus: 'usb': add driver rtl8150 [ 22.504719] usbcore: registered new interface driver rtl8150 [ 22.510394] initcall usb_rtl8150_init+0x0/0x29 returned 0 after 16 msecs [ 22.517144] calling asix_init+0x0/0x1b [ 22.520993] bus: 'usb': add driver asix [ 22.524957] usbcore: registered new interface driver asix [ 22.530373] initcall asix_init+0x0/0x1b returned 0 after 8 msecs [ 22.536424] calling cdc_init+0x0/0x1b [ 22.540192] bus: 'usb': add driver cdc_ether [ 22.547142] usbcore: registered new interface driver cdc_ether [ 22.552992] initcall cdc_init+0x0/0x1b returned 0 after 12 msecs [ 22.559048] calling dm9601_init+0x0/0x1b [ 22.563075] bus: 'usb': add driver dm9601 [ 22.567212] usbcore: registered new interface driver dm9601 [ 22.572807] initcall dm9601_init+0x0/0x1b returned 0 after 9 msecs [ 22.579036] calling usbnet_init+0x0/0x1b [ 22.583062] bus: 'usb': add driver gl620a [ 22.587200] usbcore: registered new interface driver gl620a [ 22.592789] initcall usbnet_init+0x0/0x1b returned 0 after 9 msecs [ 22.599016] calling plusb_init+0x0/0x1b [ 22.602955] bus: 'usb': add driver plusb [ 22.607016] usbcore: registered new interface driver plusb [ 22.612520] initcall plusb_init+0x0/0x1b returned 0 after 9 msecs [ 22.618660] calling rndis_init+0x0/0x1b [ 22.622599] bus: 'usb': add driver rndis_host [ 22.627083] usbcore: registered new interface driver rndis_host [ 22.633019] initcall rndis_init+0x0/0x1b returned 0 after 9 msecs
2,505 lines not shown · raw message
Part of this message is not shown here. View the raw message.
Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table
Quoted 9 lines · Ingo Molnar
Quoted 5 lines
So i'd suggest a different, more carful approach: keep the new code you wrote, but print a WARN()ing if
prev_mapis not unmapped yet when the next mapping is acquired. That way the ACPI code can be fixed gradually and without breaking existing functionality.ok, i stuck in your patches into tip/master today and -tip testing quickly found an early-ioremap leak:
Quoted 8 lines
[ 36.625100] calling check_early_ioremap_leak+0x0/0x3d [ 36.630253] ------------[ cut here ]------------ [ 36.634884] WARNING: at arch/x86/mm/ioremap.c:577 check_early_ioremap_leak+0x28/0x3d() [ 36.642811] Debug warning: early ioremap leak of 1 areas detected.find the full log below with ioremap-leak-tracing turned on. I've excluded these commits for now from tip/master.
Yes, that leak is expected, unfortunately. __acpi_map_table() has no corresponding unmap, and only maintains one mapping. So it will leak its last mapping when it switches over from using __acpi_map_table() to ioremap().
So, yes, its ugly, but its guaranteed to be a single leaked mapping. But I'm not sure what the best approach to deal with it is.
(All those other backtraces are just informational, right?)
J
Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table
Quoted 19 lines · Jeremy Fitzhardinge
Quoted 9 lines · Ingo Molnar
Quoted 5 lines
So i'd suggest a different, more carful approach: keep the new code you wrote, but print a WARN()ing if
prev_mapis not unmapped yet when the next mapping is acquired. That way the ACPI code can be fixed gradually and without breaking existing functionality.ok, i stuck in your patches into tip/master today and -tip testing quickly found an early-ioremap leak:
Quoted 8 lines
[ 36.625100] calling check_early_ioremap_leak+0x0/0x3d [ 36.630253] ------------[ cut here ]------------ [ 36.634884] WARNING: at arch/x86/mm/ioremap.c:577 check_early_ioremap_leak+0x28/0x3d() [ 36.642811] Debug warning: early ioremap leak of 1 areas detected.find the full log below with ioremap-leak-tracing turned on. I've excluded these commits for now from tip/master.
Quoted 7 lines
Yes, that leak is expected, unfortunately.
__acpi_map_table()has no corresponding unmap, and only maintains one mapping. So it will leak its last mapping when it switches over from using__acpi_map_table()toioremap().So, yes, its ugly, but its guaranteed to be a single leaked mapping. But I'm not sure what the best approach to deal with it is.
the false positive should be avoided, for example by unmapping the 'prev' mapping shortly before the leak check.
Quoted 1 line
(All those other backtraces are just informational, right?)
no, they cause hard failures in my test setup. Nor do we want to litter the bootup log with messages that are not correct.
Ingo
Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table
Quoted 3 lines · Ingo Molnar
the false positive should be avoided, for example by unmapping the 'prev' mapping shortly before the leak check.
Yep. I'll make it unmap just before setting acpi_gbl_permanent_mmap, which is when it switches to using plain old ioremap.
Quoted 6 lines
Quoted 2 lines
(All those other backtraces are just informational, right?)
no, they cause hard failures in my test setup. Nor do we want to litter the bootup log with messages that are not correct.
No, I mean that early_ioremap_debug causes all early_ioremap()s to dump a stack trace, so most of the stack dumps in the boot log are diagnostic/informational rather than indications of lots of problems.
J
Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table
Quoted 11 lines · Jeremy Fitzhardinge
Quoted 3 lines · Ingo Molnar
the false positive should be avoided, for example by unmapping the 'prev' mapping shortly before the leak check.
Yep. I'll make it unmap just before setting
acpi_gbl_permanent_mmap, which is when it switches to using plain old ioremap.Quoted 3 lines
Quoted 2 lines
(All those other backtraces are just informational, right?)
Quoted 7 lines
Quoted 3 lines
no, they cause hard failures in my test setup. Nor do we want to litter the bootup log with messages that are not correct.
No, I mean that
early_ioremap_debugcauses all early_ioremap()s to dump a stack trace, so most of the stack dumps in the boot log are diagnostic/informational rather than indications of lots of problems.
ah - now i understand what you mean, sure. The only non-diagnostic message that the test barfed on was the leak warning itself. The others were there because i did a second boot with the diagnostic messages enabled as well. (so that there's a full track of what is mapped where)
Ingo
Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table
In reply to Jeremy FitzhardingeQuoted 24 lines · Jeremy Fitzhardinge
Quoted 9 lines · Ingo Molnar
Quoted 5 lines
So i'd suggest a different, more carful approach: keep the new code you wrote, but print a WARN()ing if
prev_mapis not unmapped yet when the next mapping is acquired. That way the ACPI code can be fixed gradually and without breaking existing functionality.ok, i stuck in your patches into tip/master today and -tip testing quickly found an early-ioremap leak:
Quoted 8 lines
[ 36.625100] calling check_early_ioremap_leak+0x0/0x3d [ 36.630253] ------------[ cut here ]------------ [ 36.634884] WARNING: at arch/x86/mm/ioremap.c:577 check_early_ioremap_leak+0x28/0x3d() [ 36.642811] Debug warning: early ioremap leak of 1 areas detected.find the full log below with ioremap-leak-tracing turned on. I've excluded these commits for now from tip/master.
Yes, that leak is expected, unfortunately.
__acpi_map_table()has no corresponding unmap, and only maintains one mapping. So it will leak its last mapping when it switches over from using__acpi_map_table()toioremap().
Quoted 5 lines
So, yes, its ugly, but its guaranteed to be a single leaked mapping. But I'm not sure what the best approach to deal with it is.
(All those other backtraces are just informational, right?)
acpi_os_map_memory is the only user for __acpi_map_table (except es7000_32.c)
void __iomem *__init_refok acpi_os_map_memory(acpi_physical_address phys, acpi_size size)
{
if (phys > ULONG_MAX) {
printk(KERN_ERR PREFIX "Cannot map memory that high\n");
return NULL;
}
if (acpi_gbl_permanent_mmap)
/*
* ioremap checks to ensure this is in reserved space
*/
return ioremap((unsigned long)phys, size);
else
return __acpi_map_table((unsigned long)phys, size);
}EXPORT_SYMBOL_GPL(acpi_os_map_memory);
void acpi_os_unmap_memory(void __iomem * virt, acpi_size size)
{
if (acpi_gbl_permanent_mmap) {
iounmap(virt);
}
}EXPORT_SYMBOL_GPL(acpi_os_unmap_memory);
just let acpi_os_unmap_memory to call __acpi_unmap_table...
YH
Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table
Quoted 18 lines · Yinghai Lu
void
__iomem*__init_refokacpi_os_map_memory(acpi_physical_address phys, acpi_size size){ if (phys > ULONG_MAX) { printk(KERN_ERR PREFIX "Cannot map memory that high\n"); return NULL; } if (acpi_gbl_permanent_mmap) /* * ioremap checks to ensure this is in reserved space */ return ioremap((unsigned long)phys, size); else return __acpi_map_table((unsigned long)phys, size); }
EXPORT_SYMBOL_GPL(acpi_os_map_memory);void
acpi_os_unmap_memory(void __iomem * virt, acpi_size size)
Quoted 9 lines
{ if (acpi_gbl_permanent_mmap) { iounmap(virt); } }
EXPORT_SYMBOL_GPL(acpi_os_unmap_memory);just let
acpi_os_unmap_memoryto call__acpi_unmap_table...
That was my first attempt. Unfortunately a lot of the acpi code seems pretty sloppy about unmapping its tables, and basically relies on __acpi_map_table's current behaviour of removing the previous mapping when creating the new mapping.
J
Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table
Quoted 26 lines · Jeremy Fitzhardinge
Quoted 25 lines · Yinghai Lu
void
__iomem*__init_refokacpi_os_map_memory(acpi_physical_address phys, acpi_size size){ if (phys > ULONG_MAX) { printk(KERN_ERR PREFIX "Cannot map memory that high\n"); return NULL; } if (acpi_gbl_permanent_mmap) /* * ioremap checks to ensure this is in reserved space */ return ioremap((unsigned long)phys, size); else return __acpi_map_table((unsigned long)phys, size); }
EXPORT_SYMBOL_GPL(acpi_os_map_memory);void
acpi_os_unmap_memory(void __iomem * virt, acpi_size size){ if (acpi_gbl_permanent_mmap) { iounmap(virt); } }
EXPORT_SYMBOL_GPL(acpi_os_unmap_memory);
Quoted 7 lines
Quoted 2 lines
just let
acpi_os_unmap_memoryto call__acpi_unmap_table...That was my first attempt. Unfortunately a lot of the acpi code seems pretty sloppy about unmapping its tables, and basically relies on __acpi_map_table's current behaviour of removing the previous mapping when creating the new mapping.
could we just emit a WARN_ON_ONCE() warning when we have to remove a previous mapping, so that the ACPI code can be fixed eventually?
Ingo
Re: [PATCH 6 of 7] x86: use early_ioremap in __acpi_map_table
Quoted 32 lines · Ingo Molnar
Quoted 29 lines · Jeremy Fitzhardinge
Quoted 27 lines · Yinghai Lu
void
__iomem*__init_refokacpi_os_map_memory(acpi_physical_address phys, acpi_size size){ if (phys > ULONG_MAX) { printk(KERN_ERR PREFIX "Cannot map memory that high\n"); return NULL; } if (acpi_gbl_permanent_mmap) /* * ioremap checks to ensure this is in reserved space */ return ioremap((unsigned long)phys, size); else return __acpi_map_table((unsigned long)phys, size); }
EXPORT_SYMBOL_GPL(acpi_os_map_memory);void
acpi_os_unmap_memory(void __iomem * virt, acpi_size size){ if (acpi_gbl_permanent_mmap) { iounmap(virt); } }
EXPORT_SYMBOL_GPL(acpi_os_unmap_memory);just let
acpi_os_unmap_memoryto call__acpi_unmap_table...
Quoted 7 lines
Quoted 4 lines
That was my first attempt. Unfortunately a lot of the acpi code seems pretty sloppy about unmapping its tables, and basically relies on __acpi_map_table's current behaviour of removing the previous mapping when creating the new mapping.
could we just emit a
WARN_ON_ONCE()warning when we have to remove a previous mapping, so that the ACPI code can be fixed eventually?
could be some code is shared between early and permanent, and later may not need unmap.
anyway those code need to be cleanup, to double check if some fix-map is overwrited unexpected..
YH
A message that is not in the archive (sent off-list or not yet received): [email protected]
PATCH 1/1 acpi: remove final __acpi_map_table mapping before setting acpi_gbl_permanent_mmap
On x86, __acpi_map_table uses early_ioremap() to create the mapping, replacing the previous mapping with a new one. Once enough of the kernel is up an running it switches to using normal ioremap(). At that point, we need to clean up the final mapping to avoid a warning from the early_ioremap subsystem.
--- arch/x86/kernel/acpi/boot.c | 8 +++++--- drivers/acpi/bus.c | 6 ++++++ 2 files changed, 11 insertions(+), 3 deletions(-)
===================================================================
arch/x86/kernel/acpi/boot.c +5 -3
@@ -124,11 +124,13 @@static char *prev_map;static unsigned long prev_size; +if (prev_map) { +early_iounmap (prev_map, prev_size); + prev_map =NULL ; + } +if (!phys || !size)return NULL ; - -if (prev_map) -early_iounmap (prev_map, prev_size); prev_size = size; prev_map =early_ioremap (phys, size);
===================================================================
drivers/acpi/bus.c +6 -0
@@ -650,6 +650,12 @@if (!acpi_strict) acpi_gbl_enable_interpreter_slack = TRUE; +/* +* Doing a zero-sized mapping will clear out the previous +* __acpi_map_table() mapping, if any. +*/ +__acpi_map_table (0 ,0 ); + acpi_gbl_permanent_mmap =1 ; status =acpi_reallocate_root_table ();
PATCH 1/1 x86: always explicitly map acpi memory
In reply to Jeremy FitzhardingeAlways map acpi tables, rather than assuming we can use the normal linear mapping to access the acpi tables. This is necessary in a virtual environment where the linear mappings are to pseudo-physical memory, but the acpi tables exist at a real physical address. It doesn't hurt to map in the normal non-virtual case, so just do it unconditionally.
--- arch/x86/kernel/acpi/boot.c | 3 --- 1 file changed, 3 deletions(-)
arch/x86/kernel/acpi/boot.c +0 -3
@@ -126,9 +126,6 @@if (!phys || !size)return NULL ; - -if (phys+size <= (max_low_pfn_mapped <<PAGE_SHIFT )) -return __va (phys);if (prev_map)early_iounmap (prev_map, prev_size);
Re: [Xen-devel] [PATCH 7 of 7] x86: always explicitly map acpi memory
Quoted 17 lines · Jeremy Fitzhardinge
Always map acpi tables, rather than assuming we can use the normal linear mapping to access the acpi tables. This is necessary in a virtual environment where the linear mappings are to pseudo-physical memory, but the acpi tables exist at a real physical address. It doesn't hurt to map in the normal non-virtual case, so just do it unconditionally.
Signed-off-by Jeremy Fitzhardinge <[email protected]>--- arch/x86/kernel/acpi/boot.c | 3 --- 1 file changed, 3 deletions(-)
arch/x86/kernel/acpi/boot.c line 131
Quoted 9 lines
arch/x86/kernel/acpi/boot.c +0
-3@@ -126,9 +126,6 @@if (!phys || !size)return NULL ; - -if (phys+size <= (max_low_pfn_mapped <<PAGE_SHIFT )) -return __va (phys);if (prev_map)early_iounmap (prev_map, prev_size);
actually,
case 1: acpi tables near mmio, range, we don't map them from 2.6.27-rc1, and it is bigger than max_low_mapped...
case 2: some strange system put acpi in the middle of RAM... like when 8G ram installed, but MMIO is 3.5G, BIOS put acpi tables around 2G..
YH
Re: [Xen-devel] [PATCH 7 of 7] x86: always explicitly map acpi memory
Quoted 6 lines · Yinghai Lu
actually,
case 1: acpi tables near mmio, range, we don't map them from 2.6.27-rc1, and it is bigger thanmax_low_mapped...
case 2: some strange system put acpi in the middle of RAM... like when 8G ram installed, but MMIO is 3.5G, BIOS put acpi tables around 2G..
OK, so what's your conclusion? Is this change OK or not?
J
Yinghai Lu
Acked-byRe: [Xen-devel] [PATCH 7 of 7] x86: always explicitly map acpi memory
Quoted 10 lines · Jeremy Fitzhardinge
Quoted 6 lines · Yinghai Lu
actually,
case 1: acpi tables near mmio, range, we don't map them from 2.6.27-rc1, and it is bigger thanmax_low_mapped...
case 2: some strange system put acpi in the middle of RAM... like when 8G ram installed, but MMIO is 3.5G, BIOS put acpi tables around 2G..OK, so what's your conclusion? Is this change OK or not?