ibmvfc: initial MQ development
Subsystems (3)
Tyrel Datwyler
maintainerv3 cover ibmvfc: initial MQ development
Recent updates in pHyp Firmware and VIOS releases provide new infrastructure towards enabling Subordinate Command Response Queues (Sub-CRQs) such that each Sub-CRQ is a channel backed by an actual hardware queue in the FC stack on the partner VIOS. Sub-CRQs are registered with the firmware via hypercalls and then negotiated with the VIOS via new Management Datagrams (MADs) for channel setup.
This initial implementation adds the necessary Sub-CRQ framework and implements the new MADs for negotiating and assigning a set of Sub-CRQs to associated VIOS HW backed channels. The event pool and locking still leverages the legacy single queue implementation, and as such lock contention is problematic when increasing the number of queues. However, this initial work demonstrates a 1.2x factor increase in IOPs when configured with two HW queues despite lock contention.
changes in v2:
* Patch 4: changed firmware support logging to dev_warn_once
* Patch 6: adjusted locking
* Patch 15: dropped logging verbosity, moved cancel event tracking into subqueue
* Patch 17: removed write permission for migration module parameters drive hard reset after update to num of scsi channels
changes in v2:
* Patch 4: NULL'd scsi_scrq reference after deallocation
* Patch 6: Added switch case to handle XPORT event
* Patch 9: fixed ibmvfc_event leak and double free
* added support for cancel command with MQ
* added parameter toggles for MQ settings
Tyrel Datwyler (18):
ibmvfc: add vhost fields and defaults for MQ enablement
ibmvfc: define hcall wrapper for registering a Sub-CRQ
ibmvfc: add Subordinate CRQ definitions
ibmvfc: add alloc/dealloc routines for SCSI Sub-CRQ Channels
ibmvfc: add Sub-CRQ IRQ enable/disable routine
ibmvfc: add handlers to drain and complete Sub-CRQ responses
ibmvfc: define Sub-CRQ interrupt handler routine
ibmvfc: map/request irq and register Sub-CRQ interrupt handler
ibmvfc: implement channel enquiry and setup commands
ibmvfc: advertise client support for using hardware channels
ibmvfc: set and track hw queue in ibmvfc_event struct
ibmvfc: send commands down HW Sub-CRQ when channelized
ibmvfc: register Sub-CRQ handles with VIOS during channel setup
ibmvfc: add cancel mad initialization helper
ibmvfc: send Cancel MAD down each hw scsi channel
ibmvfc: enable MQ and set reasonable defaults
ibmvfc: provide modules parameters for MQ settings
ibmvfc: drop host lock when completing commands in CRQ
drivers/scsi/ibmvscsi/ibmvfc.c | 721 +++++++++++++++++++++++++++++---- drivers/scsi/ibmvscsi/ibmvfc.h | 79 +++- 2 files changed, 711 insertions(+), 89 deletions(-)
Signature · 1 line
2.27.0
Tyrel Datwyler
maintainerPATCH v3 1/18 ibmvfc: add vhost fields and defaults for MQ enablement
Introduce several new vhost fields for managing MQ state of the adapter as well as initial defaults for MQ enablement.
--- drivers/scsi/ibmvscsi/ibmvfc.c | 9 ++++++++- drivers/scsi/ibmvscsi/ibmvfc.h | 13 +++++++++++-- 2 files changed, 19 insertions(+), 3 deletions(-)
drivers/scsi/ibmvscsi/ibmvfc.c +8 -1
@@ -5161,12 +5161,13 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id) } shost->transportt = ibmvfc_transport_template; - shost->can_queue = max_requests; + shost->can_queue = (max_requests /IBMVFC_SCSI_HW_QUEUES ); shost->max_lun = max_lun; shost->max_id = max_targets; shost->max_sectors =IBMVFC_MAX_SECTORS ; shost->max_cmd_len =IBMVFC_MAX_CDB_LEN ; shost->unique_id = shost->host_no; + shost->nr_hw_queues =IBMVFC_SCSI_HW_QUEUES ; vhost =shost_priv (shost);INIT_LIST_HEAD (&vhost->sent);
@@ -5178,6 +5179,12 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id) vhost->partition_number =-1 ; vhost->log_level = log_level; vhost->task_set =1 ; + + vhost->mq_enabled =IBMVFC_MQ ; + vhost->client_scsi_channels =IBMVFC_SCSI_CHANNELS ; + vhost->using_channels =0 ; + vhost->do_enquiry =1 ; +strcpy (vhost->partition_name,"UNKNOWN" );init_waitqueue_head (&vhost->work_wait_q);init_waitqueue_head (&vhost->init_wait_q);
drivers/scsi/ibmvscsi/ibmvfc.h +11 -2
@@ -41,16 +41,21 @@#define IBMVFC_DEFAULT_LOG_LEVEL 2#define IBMVFC_MAX_CDB_LEN 16#define IBMVFC_CLS3_ERROR 0 +#define IBMVFC_MQ 0 +#define IBMVFC_SCSI_CHANNELS 0 +#define IBMVFC_SCSI_HW_QUEUES 1 +#define IBMVFC_MIG_NO_SUB_TO_CRQ 0 +#define IBMVFC_MIG_NO_N_TO_M 0/* * Ensure we have resources for ERP and initialization: -* 1 for ERP * 1 for initialization * 1 for NPIV Logout * 2 for BSG passthru * 2 for each discovery thread +* 1 ERP for each possible HW Queue */ -#define IBMVFC_NUM_INTERNAL_REQ (1 + 1 + 1 + 2 + (disc_threads * 2)) +#define IBMVFC_NUM_INTERNAL_REQ (1 + 1 + 2 + (disc_threads * 2) + IBMVFC_SCSI_HW_QUEUES)#define IBMVFC_MAD_SUCCESS 0x00#define IBMVFC_MAD_NOT_SUPPORTED 0xF1
@@ -826,6 +831,10 @@ struct ibmvfc_host {int delay_init;int scan_complete;int logged_in; +int mq_enabled; +int using_channels; +int do_enquiry; +int client_scsi_channels;int aborting_passthru;int events_to_log;#define IBMVFC_AE_LINKUP 0x0001
Signature · 1 line
2.27.0
Tyrel Datwyler
maintainerPATCH v3 2/18 ibmvfc: define hcall wrapper for registering a Sub-CRQ
In reply to Tyrel DatwylerSub-CRQs are registred with firmware via a hypercall. Abstract that interface into a simpler helper function.
--- drivers/scsi/ibmvscsi/ibmvfc.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
drivers/scsi/ibmvscsi/ibmvfc.c +14 -0
@@ -138,6 +138,20 @@ static void ibmvfc_tgt_move_login(struct ibmvfc_target *);static const char *unknown_error ="unknown error" ; +static long h_reg_sub_crq (unsigned long unit_address,unsigned long ioba, +unsigned long length,unsigned long *cookie, +unsigned long *irq) +{ +unsigned long retbuf[PLPAR_HCALL_BUFSIZE ]; +long rc; + + rc =plpar_hcall (H_REG_SUB_CRQ , retbuf, unit_address, ioba, length); + *cookie = retbuf[0 ]; + *irq = retbuf[1 ]; + +return rc; +} +static int ibmvfc_check_caps (struct ibmvfc_host *vhost,unsigned long cap_flags) {u64 host_caps =be64_to_cpu (vhost->login_buf->resp.capabilities);
Signature · 1 line
2.27.0
Tyrel Datwyler
maintainerPATCH v3 3/18 ibmvfc: add Subordinate CRQ definitions
In reply to Tyrel DatwylerSubordinate Command Response Queues (Sub CRQ) are used in conjunction with the primary CRQ when more than one queue is needed by the virtual IO adapter. Recent phyp firmware versions support Sub CRQ's with ibmvfc adapters. This feature is a prerequisite for supporting multiple hardware backed submission queues in the vfc adapter.
The Sub CRQ command element differs from the standard CRQ in that it is 32bytes long as opposed to 16bytes for the latter. Despite this extra 16bytes the ibmvfc protocol will use the original CRQ command element mapped to the first 16bytes of the Sub CRQ element initially.
Add definitions for the Sub CRQ command element and queue.
--- drivers/scsi/ibmvscsi/ibmvfc.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
drivers/scsi/ibmvscsi/ibmvfc.h +23 -0
@@ -656,6 +656,29 @@ struct ibmvfc_crq_queue {dma_addr_t msg_token; }; +struct ibmvfc_sub_crq { +struct ibmvfc_crq crq; +__be64 reserved[2 ]; +} __packed__aligned(8) ; + +struct ibmvfc_sub_queue { +struct ibmvfc_sub_crq *msgs; +dma_addr_t msg_token; +int size, cur; +struct ibmvfc_host *vhost; +unsigned long cookie; +unsigned long vios_cookie; +unsigned long hw_irq; +unsigned long irq; +unsigned long hwq_id; +char name[32 ]; +}; + +struct ibmvfc_scsi_channels { +struct ibmvfc_sub_queue *scrqs; +unsigned int active_queues; +}; +enum ibmvfc_ae_link_state {IBMVFC_AE_LS_LINK_UP =0x01 ,IBMVFC_AE_LS_LINK_BOUNCED =0x02 ,
Signature · 1 line
2.27.0
Tyrel Datwyler
maintainerPATCH v3 4/18 ibmvfc: add alloc/dealloc routines for SCSI Sub-CRQ Channels
In reply to Tyrel DatwylerAllocate a set of Sub-CRQs in advance. During channel setup the client and VIOS negotiate the number of queues the VIOS supports and the number that the client desires to request. Its possible that the final channel resources allocated is less than requested, but the client is still responsible for sending handles for every queue it is hoping for.
Also, provide deallocation cleanup routines.
--- drivers/scsi/ibmvscsi/ibmvfc.c | 129 +++++++++++++++++++++++++++++++++ drivers/scsi/ibmvscsi/ibmvfc.h | 1 + 2 files changed, 130 insertions(+)
drivers/scsi/ibmvscsi/ibmvfc.c +129 -0
@@ -793,6 +793,8 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost)unsigned long flags;struct vio_dev *vdev =to_vio_dev (vhost->dev);struct ibmvfc_crq_queue *crq = &vhost->crq; +struct ibmvfc_sub_queue *scrq; +int i;/* Close the CRQ */ do {
@@ -809,6 +811,14 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost)memset (crq->msgs,0 ,PAGE_SIZE ); crq->cur =0 ; +if (vhost->scsi_scrqs.scrqs) { +for (i =0 ; i <IBMVFC_SCSI_HW_QUEUES ; i++) { + scrq = &vhost->scsi_scrqs.scrqs[i]; +memset (scrq->msgs,0 ,PAGE_SIZE ); + scrq->cur =0 ; + } + } +/* And re-open it again */ rc =plpar_hcall_norets (H_REG_CRQ , vdev->unit_address, crq->msg_token,PAGE_SIZE );
@@ -4983,6 +4993,118 @@ static int ibmvfc_init_crq(struct ibmvfc_host *vhost)return retrc; } +static int ibmvfc_register_scsi_channel (struct ibmvfc_host *vhost, +int index) +{ +struct device *dev = vhost->dev; +struct vio_dev *vdev =to_vio_dev (dev); +struct ibmvfc_sub_queue *scrq = &vhost->scsi_scrqs.scrqs[index]; +int rc = -ENOMEM ; + +ENTER ; + + scrq->msgs = (struct ibmvfc_sub_crq *)get_zeroed_page (GFP_KERNEL ); +if (!scrq->msgs) +return rc; + + scrq->size =PAGE_SIZE /sizeof (*scrq->msgs); + scrq->msg_token =dma_map_single (dev, scrq->msgs,PAGE_SIZE , +DMA_BIDIRECTIONAL ); + +if (dma_mapping_error (dev, scrq->msg_token)) + goto dma_map_failed; + + rc =h_reg_sub_crq (vdev->unit_address, scrq->msg_token,PAGE_SIZE , + &scrq->cookie, &scrq->hw_irq); + +if (rc) { +dev_warn (dev,"Error registering sub-crq: %d\n" , rc); +if (rc ==H_PARAMETER ) +dev_warn_once (dev,"Firmware may not support MQ\n" ); + goto reg_failed; + } + + scrq->hwq_id = index; + scrq->vhost = vhost; + +LEAVE ; +return 0 ; + +reg_failed: +dma_unmap_single (dev, scrq->msg_token,PAGE_SIZE ,DMA_BIDIRECTIONAL ); +dma_map_failed: +free_page ((unsigned long )scrq->msgs); +LEAVE ; +return rc; +} + +static void ibmvfc_deregister_scsi_channel (struct ibmvfc_host *vhost,int index) +{ +struct device *dev = vhost->dev; +struct vio_dev *vdev =to_vio_dev (dev); +struct ibmvfc_sub_queue *scrq = &vhost->scsi_scrqs.scrqs[index]; +long rc; + +ENTER ; + +do { + rc =plpar_hcall_norets (H_FREE_SUB_CRQ , vdev->unit_address, + scrq->cookie); + }while (rc ==H_BUSY ||H_IS_LONG_BUSY (rc)); + +if (rc) +dev_err (dev,"Failed to free sub-crq[%d]: rc=%ld\n" , index, rc); + +dma_unmap_single (dev, scrq->msg_token,PAGE_SIZE ,DMA_BIDIRECTIONAL ); +free_page ((unsigned long )scrq->msgs); +LEAVE ; +} + +static int ibmvfc_init_sub_crqs (struct ibmvfc_host *vhost) +{ +int i, j; + +ENTER ; + + vhost->scsi_scrqs.scrqs =kcalloc (IBMVFC_SCSI_HW_QUEUES , +sizeof (*vhost->scsi_scrqs.scrqs), +GFP_KERNEL ); +if (!vhost->scsi_scrqs.scrqs) +return -1 ; + +for (i =0 ; i <IBMVFC_SCSI_HW_QUEUES ; i++) { +if (ibmvfc_register_scsi_channel (vhost, i)) { +for (j = i; j >0 ; j--) +ibmvfc_deregister_scsi_channel (vhost, j -1 ); +kfree (vhost->scsi_scrqs.scrqs); + vhost->scsi_scrqs.scrqs =NULL ; + vhost->scsi_scrqs.active_queues =0 ; +LEAVE ; +return -1 ; + } + } + +LEAVE ; +return 0 ; +} + +static void ibmvfc_release_sub_crqs (struct ibmvfc_host *vhost) +{ +int i; + +ENTER ; +if (!vhost->scsi_scrqs.scrqs) +return ; + +for (i =0 ; i <IBMVFC_SCSI_HW_QUEUES ; i++) +ibmvfc_deregister_scsi_channel (vhost, i); + +kfree (vhost->scsi_scrqs.scrqs); + vhost->scsi_scrqs.scrqs =NULL ; + vhost->scsi_scrqs.active_queues =0 ; +LEAVE ; +} +/** * ibmvfc_free_mem - Free memory for vhost * @vhost: ibmvfc host struct
@@ -5239,6 +5361,12 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id) goto remove_shost; } +if (vhost->mq_enabled) { + rc =ibmvfc_init_sub_crqs (vhost); +if (rc) +dev_warn (dev,"Failed to allocate Sub-CRQs. rc=%d\n" , rc); + } +if (shost_to_fc_host (shost)->rqst_q)blk_queue_max_segments (shost_to_fc_host (shost)->rqst_q,1 );dev_set_drvdata (dev, vhost);
@@ -5296,6 +5424,7 @@ static int ibmvfc_remove(struct vio_dev *vdev)ibmvfc_purge_requests (vhost,DID_ERROR );spin_unlock_irqrestore (vhost->host->host_lock, flags);ibmvfc_free_event_pool (vhost); +ibmvfc_release_sub_crqs (vhost);ibmvfc_free_mem (vhost);spin_lock (&ibmvfc_driver_lock);
drivers/scsi/ibmvscsi/ibmvfc.h +1 -0
@@ -838,6 +838,7 @@ struct ibmvfc_host {mempool_t *tgt_pool;struct ibmvfc_crq_queue crq;struct ibmvfc_async_crq_queue async_crq; +struct ibmvfc_scsi_channels scsi_scrqs;struct ibmvfc_npiv_login login_info;union ibmvfc_npiv_login_data *login_buf;dma_addr_t login_buf_dma;
Signature · 1 line
2.27.0
Re: [PATCH v3 04/18] ibmvfc: add alloc/dealloc routines for SCSI Sub-CRQ Channels
Quoted 120 lines · Tyrel Datwyler
drivers/scsi/ibmvscsi/ibmvfc.c +112
-0@@ -4983,6 +4993,118 @@ static int ibmvfc_init_crq(struct ibmvfc_host *vhost)return retrc; } +static int ibmvfc_register_scsi_channel (struct ibmvfc_host *vhost, +int index) +{ +struct device *dev = vhost->dev; +struct vio_dev *vdev =to_vio_dev (dev); +struct ibmvfc_sub_queue *scrq = &vhost->scsi_scrqs.scrqs[index]; +int rc = -ENOMEM ; + +ENTER ; + + scrq->msgs = (struct ibmvfc_sub_crq *)get_zeroed_page (GFP_KERNEL ); +if (!scrq->msgs) +return rc; + + scrq->size =PAGE_SIZE /sizeof (*scrq->msgs); + scrq->msg_token =dma_map_single (dev, scrq->msgs,PAGE_SIZE , +DMA_BIDIRECTIONAL ); + +if (dma_mapping_error (dev, scrq->msg_token)) + goto dma_map_failed; + + rc =h_reg_sub_crq (vdev->unit_address, scrq->msg_token,PAGE_SIZE , + &scrq->cookie, &scrq->hw_irq); + +if (rc) { +dev_warn (dev,"Error registering sub-crq: %d\n" , rc); +if (rc ==H_PARAMETER ) +dev_warn_once (dev,"Firmware may not support MQ\n" ); + goto reg_failed; + } + + scrq->hwq_id = index; + scrq->vhost = vhost; + +LEAVE ; +return 0 ; + +reg_failed: +dma_unmap_single (dev, scrq->msg_token,PAGE_SIZE ,DMA_BIDIRECTIONAL ); +dma_map_failed: +free_page ((unsigned long )scrq->msgs); +LEAVE ; +return rc; +} + +static void ibmvfc_deregister_scsi_channel (struct ibmvfc_host *vhost,int index) +{ +struct device *dev = vhost->dev; +struct vio_dev *vdev =to_vio_dev (dev); +struct ibmvfc_sub_queue *scrq = &vhost->scsi_scrqs.scrqs[index]; +long rc; + +ENTER ; + +do { + rc =plpar_hcall_norets (H_FREE_SUB_CRQ , vdev->unit_address, + scrq->cookie); + }while (rc ==H_BUSY ||H_IS_LONG_BUSY (rc)); + +if (rc) +dev_err (dev,"Failed to free sub-crq[%d]: rc=%ld\n" , index, rc); + +dma_unmap_single (dev, scrq->msg_token,PAGE_SIZE ,DMA_BIDIRECTIONAL ); +free_page ((unsigned long )scrq->msgs); +LEAVE ; +} + +static int ibmvfc_init_sub_crqs (struct ibmvfc_host *vhost) +{ +int i, j; + +ENTER ; + + vhost->scsi_scrqs.scrqs =kcalloc (IBMVFC_SCSI_HW_QUEUES , +sizeof (*vhost->scsi_scrqs.scrqs), +GFP_KERNEL ); +if (!vhost->scsi_scrqs.scrqs) +return -1 ; + +for (i =0 ; i <IBMVFC_SCSI_HW_QUEUES ; i++) { +if (ibmvfc_register_scsi_channel (vhost, i)) { +for (j = i; j >0 ; j--) +ibmvfc_deregister_scsi_channel (vhost, j -1 ); +kfree (vhost->scsi_scrqs.scrqs); + vhost->scsi_scrqs.scrqs =NULL ; + vhost->scsi_scrqs.active_queues =0 ; +LEAVE ; +return -1 ; + } + } + +LEAVE ; +return 0 ; +} + +static void ibmvfc_release_sub_crqs (struct ibmvfc_host *vhost) +{ +int i; + +ENTER ; +if (!vhost->scsi_scrqs.scrqs) +return ; + +for (i =0 ; i <IBMVFC_SCSI_HW_QUEUES ; i++) +ibmvfc_deregister_scsi_channel (vhost, i); + +kfree (vhost->scsi_scrqs.scrqs); + vhost->scsi_scrqs.scrqs =NULL ; + vhost->scsi_scrqs.active_queues =0 ; +LEAVE ; +} +/** * ibmvfc_free_mem - Free memory for vhost * @vhost: ibmvfc host struct
drivers/scsi/ibmvscsi/ibmvfc.c static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id) · line 5367
Quoted 7 lines
drivers/scsi/ibmvscsi/ibmvfc.c +4
-0@@ -5239,6 +5361,12 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id) goto remove_shost; } +if (vhost->mq_enabled) { + rc =ibmvfc_init_sub_crqs (vhost); +if (rc) +dev_warn (dev,"Failed to allocate Sub-CRQs. rc=%d\n" , rc);
So, I think if you end up down this path, you will have:
vhost->scsi_scrqs.scrqs == NULLvhost->scsi_scrqs.active_queues == 0
And you proceed with discovery. You will proceed with enquiry and channel setup. Then, I think you could end up in queuecommand doing this:
evt->hwq = hwq % vhost->scsi_scrqs.active_queues;
And that is a divide by zero...
I wonder if it would be better in this scenario where registering the sub crqs fails, if you just did:
vhost->do_enquiry = 0;vhost->mq_enabled = 0;vhost->using_channels = 0;
It looks like you only try to allocate the subcrqs in probe, so if that fails, we'd never end up using mq, so just disabling in this case seems reasonable.
Thanks,
Brian
Signature · 3 lines
Brian King Power Linux I/O IBM Linux Technology Center
Tyrel Datwyler
maintainerRe: [PATCH v3 04/18] ibmvfc: add alloc/dealloc routines for SCSI Sub-CRQ Channels
Quoted 134 lines · Brian King
Quoted 120 lines · Tyrel Datwyler
drivers/scsi/ibmvscsi/ibmvfc.c +112
-0@@ -4983,6 +4993,118 @@ static int ibmvfc_init_crq(struct ibmvfc_host *vhost)return retrc; } +static int ibmvfc_register_scsi_channel (struct ibmvfc_host *vhost, +int index) +{ +struct device *dev = vhost->dev; +struct vio_dev *vdev =to_vio_dev (dev); +struct ibmvfc_sub_queue *scrq = &vhost->scsi_scrqs.scrqs[index]; +int rc = -ENOMEM ; + +ENTER ; + + scrq->msgs = (struct ibmvfc_sub_crq *)get_zeroed_page (GFP_KERNEL ); +if (!scrq->msgs) +return rc; + + scrq->size =PAGE_SIZE /sizeof (*scrq->msgs); + scrq->msg_token =dma_map_single (dev, scrq->msgs,PAGE_SIZE , +DMA_BIDIRECTIONAL ); + +if (dma_mapping_error (dev, scrq->msg_token)) + goto dma_map_failed; + + rc =h_reg_sub_crq (vdev->unit_address, scrq->msg_token,PAGE_SIZE , + &scrq->cookie, &scrq->hw_irq); + +if (rc) { +dev_warn (dev,"Error registering sub-crq: %d\n" , rc); +if (rc ==H_PARAMETER ) +dev_warn_once (dev,"Firmware may not support MQ\n" ); + goto reg_failed; + } + + scrq->hwq_id = index; + scrq->vhost = vhost; + +LEAVE ; +return 0 ; + +reg_failed: +dma_unmap_single (dev, scrq->msg_token,PAGE_SIZE ,DMA_BIDIRECTIONAL ); +dma_map_failed: +free_page ((unsigned long )scrq->msgs); +LEAVE ; +return rc; +} + +static void ibmvfc_deregister_scsi_channel (struct ibmvfc_host *vhost,int index) +{ +struct device *dev = vhost->dev; +struct vio_dev *vdev =to_vio_dev (dev); +struct ibmvfc_sub_queue *scrq = &vhost->scsi_scrqs.scrqs[index]; +long rc; + +ENTER ; + +do { + rc =plpar_hcall_norets (H_FREE_SUB_CRQ , vdev->unit_address, + scrq->cookie); + }while (rc ==H_BUSY ||H_IS_LONG_BUSY (rc)); + +if (rc) +dev_err (dev,"Failed to free sub-crq[%d]: rc=%ld\n" , index, rc); + +dma_unmap_single (dev, scrq->msg_token,PAGE_SIZE ,DMA_BIDIRECTIONAL ); +free_page ((unsigned long )scrq->msgs); +LEAVE ; +} + +static int ibmvfc_init_sub_crqs (struct ibmvfc_host *vhost) +{ +int i, j; + +ENTER ; + + vhost->scsi_scrqs.scrqs =kcalloc (IBMVFC_SCSI_HW_QUEUES , +sizeof (*vhost->scsi_scrqs.scrqs), +GFP_KERNEL ); +if (!vhost->scsi_scrqs.scrqs) +return -1 ; + +for (i =0 ; i <IBMVFC_SCSI_HW_QUEUES ; i++) { +if (ibmvfc_register_scsi_channel (vhost, i)) { +for (j = i; j >0 ; j--) +ibmvfc_deregister_scsi_channel (vhost, j -1 ); +kfree (vhost->scsi_scrqs.scrqs); + vhost->scsi_scrqs.scrqs =NULL ; + vhost->scsi_scrqs.active_queues =0 ; +LEAVE ; +return -1 ; + } + } + +LEAVE ; +return 0 ; +} + +static void ibmvfc_release_sub_crqs (struct ibmvfc_host *vhost) +{ +int i; + +ENTER ; +if (!vhost->scsi_scrqs.scrqs) +return ; + +for (i =0 ; i <IBMVFC_SCSI_HW_QUEUES ; i++) +ibmvfc_deregister_scsi_channel (vhost, i); + +kfree (vhost->scsi_scrqs.scrqs); + vhost->scsi_scrqs.scrqs =NULL ; + vhost->scsi_scrqs.active_queues =0 ; +LEAVE ; +} +/** * ibmvfc_free_mem - Free memory for vhost * @vhost: ibmvfc host struct drivers/scsi/ibmvscsi/ibmvfc.c static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id) · line 5367
Quoted 7 lines
drivers/scsi/ibmvscsi/ibmvfc.c +4
-0@@ -5239,6 +5361,12 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id) goto remove_shost; } +if (vhost->mq_enabled) { + rc =ibmvfc_init_sub_crqs (vhost); +if (rc) +dev_warn (dev,"Failed to allocate Sub-CRQs. rc=%d\n" , rc);So, I think if you end up down this path, you will have:
vhost->scsi_scrqs.scrqs== NULLvhost->scsi_scrqs.active_queues== 0
Quoted 6 lines
And you proceed with discovery. You will proceed with enquiry and channel setup. Then, I think you could end up in queuecommand doing this
evt->hwq= hwq %vhost->scsi_scrqs.active_queues;And that is a divide by zero...
Actually, we would bite the dust earlier than that but it requires the sub-crq allocation to fail for a reason other than lack of firmware support. In the no firmware support case the VIOS doesn't report channel support and we skip the enquiry and setup steps. However, in the case where there is support and allocation fails we would dereference a NULL pointer trying to write the channel sub-crq handles into the channel_setup MAD.
Quoted 10 lines
I wonder if it would be better in this scenario where registering the sub crqs fails, if you just did:
vhost->do_enquiry= 0;vhost->mq_enabled= 0;vhost->using_channels= 0;It looks like you only try to allocate the subcrqs in probe, so if that fails, we'd never end up using mq, so just disabling in this case seems reasonable.
This breaks migration from legacy to a target with channel support. It appears that migration for that case is already broken anyways. Need to rethink sub-crq setup. Maybe best to actually do it during the negoation steps instead of in probe.
-Tyrel
Quoted 5 lines
Thanks,
Brian
Tyrel Datwyler
maintainerPATCH v3 5/18 ibmvfc: add Sub-CRQ IRQ enable/disable routine
In reply to Tyrel DatwylerEach Sub-CRQ has its own interrupt. A hypercall is required to toggle the IRQ state. Provide the necessary mechanism via a helper function.
--- drivers/scsi/ibmvscsi/ibmvfc.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
drivers/scsi/ibmvscsi/ibmvfc.c +20 -0
@@ -3361,6 +3361,26 @@ static void ibmvfc_tasklet(void *data)spin_unlock_irqrestore (vhost->host->host_lock, flags); } +static int ibmvfc_toggle_scrq_irq (struct ibmvfc_sub_queue *scrq,int enable) +{ +struct device *dev = scrq->vhost->dev; +struct vio_dev *vdev =to_vio_dev (dev); +unsigned long rc; +int irq_action =H_ENABLE_VIO_INTERRUPT ; + +if (!enable) + irq_action =H_DISABLE_VIO_INTERRUPT ; + + rc =plpar_hcall_norets (H_VIOCTL , vdev->unit_address, irq_action, + scrq->hw_irq,0 ,0 ); + +if (rc) +dev_err (dev,"Couldn't %s sub-crq[%lu] irq. rc=%ld\n" , + enable ?"enable" :"disable" , scrq->hwq_id, rc); + +return rc; +} +/** * ibmvfc_init_tgt - Set the next init job step for the target * @tgt: ibmvfc target struct
Signature · 1 line
2.27.0
Tyrel Datwyler
maintainerPATCH v3 6/18 ibmvfc: add handlers to drain and complete Sub-CRQ responses
In reply to Tyrel DatwylerThe logic for iterating over the Sub-CRQ responses is similiar to that of the primary CRQ. Add the necessary handlers for processing those responses.
--- drivers/scsi/ibmvscsi/ibmvfc.c | 80 ++++++++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+)
drivers/scsi/ibmvscsi/ibmvfc.c +80 -0
@@ -3381,6 +3381,86 @@ static int ibmvfc_toggle_scrq_irq(struct ibmvfc_sub_queue *scrq, int enable)return rc; } +static void ibmvfc_handle_scrq (struct ibmvfc_crq *crq,struct ibmvfc_host *vhost) +{ +struct ibmvfc_event *evt = (struct ibmvfc_event *)be64_to_cpu (crq->ioba); +unsigned long flags; + +switch (crq->valid) { +case IBMVFC_CRQ_CMD_RSP : +break ; +case IBMVFC_CRQ_XPORT_EVENT : +return ; +default : +dev_err (vhost->dev,"Got and invalid message type 0x%02x\n" , crq->valid); +return ; + } + +/* The only kind of payload CRQs we should get are responses to +* things we send. Make sure this response is to something we +* actually sent +*/ +if (unlikely (!ibmvfc_valid_event (&vhost->pool, evt))) { +dev_err (vhost->dev,"Returned correlation_token 0x%08llx is invalid!\n" , + crq->ioba); +return ; + } + +if (unlikely (atomic_read (&evt->free))) { +dev_err (vhost->dev,"Received duplicate correlation_token 0x%08llx!\n" , + crq->ioba); +return ; + } + +del_timer (&evt->timer); +list_del (&evt->queue); +ibmvfc_trc_end (evt); +spin_unlock_irqrestore (vhost->host->host_lock, flags); + evt->done (evt); +spin_lock_irqsave (vhost->host->host_lock, flags); +} + +static struct ibmvfc_crq *ibmvfc_next_scrq (struct ibmvfc_sub_queue *scrq) +{ +struct ibmvfc_crq *crq; + + crq = &scrq->msgs[scrq->cur].crq; +if (crq->valid &0x80 ) { +if (++scrq->cur == scrq->size) + scrq->cur =0 ; +rmb (); + }else + crq =NULL ; + +return crq; +} + +static void ibmvfc_drain_sub_crq (struct ibmvfc_sub_queue *scrq) +{ +struct ibmvfc_crq *crq; +unsigned long flags; +int done =0 ; + +spin_lock_irqsave (scrq->vhost->host->host_lock, flags); +while (!done) { +while ((crq =ibmvfc_next_scrq (scrq)) !=NULL ) { +ibmvfc_handle_scrq (crq, scrq->vhost); + crq->valid =0 ; +wmb (); + } + +ibmvfc_toggle_scrq_irq (scrq,1 ); +if ((crq =ibmvfc_next_scrq (scrq)) !=NULL ) { +ibmvfc_toggle_scrq_irq (scrq,0 ); +ibmvfc_handle_scrq (crq, scrq->vhost); + crq->valid =0 ; +wmb (); + }else + done =1 ; + } +spin_unlock_irqrestore (scrq->vhost->host->host_lock, flags); +} +/** * ibmvfc_init_tgt - Set the next init job step for the target * @tgt: ibmvfc target struct
Signature · 1 line
2.27.0
Re: [PATCH v3 06/18] ibmvfc: add handlers to drain and complete Sub-CRQ responses
Quoted 41 lines · Tyrel Datwyler
The logic for iterating over the Sub-CRQ responses is similiar to that of the primary CRQ. Add the necessary handlers for processing those responses.
Signed-off-by Tyrel Datwyler <[email protected]>--- drivers/scsi/ibmvscsi/ibmvfc.c | 80 ++++++++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+)drivers/scsi/ibmvscsi/ibmvfc.c +24
-0@@ -3381,6 +3381,86 @@ static int ibmvfc_toggle_scrq_irq(struct ibmvfc_sub_queue *scrq, int enable)return rc; } +static void ibmvfc_handle_scrq (struct ibmvfc_crq *crq,struct ibmvfc_host *vhost) +{ +struct ibmvfc_event *evt = (struct ibmvfc_event *)be64_to_cpu (crq->ioba); +unsigned long flags; + +switch (crq->valid) { +case IBMVFC_CRQ_CMD_RSP : +break ; +case IBMVFC_CRQ_XPORT_EVENT : +return ; +default : +dev_err (vhost->dev,"Got and invalid message type 0x%02x\n" , crq->valid); +return ; + } + +/* The only kind of payload CRQs we should get are responses to +* things we send. Make sure this response is to something we +* actually sent +*/ +if (unlikely (!ibmvfc_valid_event (&vhost->pool, evt))) { +dev_err (vhost->dev,"Returned correlation_token 0x%08llx is invalid!\n" , + crq->ioba); +return ; + }
drivers/scsi/ibmvscsi/ibmvfc.c static int ibmvfc_toggle_scrq_irq(struct ibmvfc_sub_queue *scrq, int enable) · line 3417
Quoted 10 lines
drivers/scsi/ibmvscsi/ibmvfc.c +10
-0+ +if (unlikely (atomic_read (&evt->free))) { +dev_err (vhost->dev,"Received duplicate correlation_token 0x%08llx!\n" , + crq->ioba); +return ; + } + +del_timer (&evt->timer); +list_del (&evt->queue); + ibmvfc_trc_end(evt);> + spin_unlock_irqrestore(vhost->host->host_lock, flags);
You can't do this here... You are grabbing the host lock in ibmvfc_drain_sub_crq and saving the irqflags to a local in that function, then doing a spin_unlock_irqrestore and restoring irqflags using an uninitialized local in this function...
I'm assuming this will get sorted out with the locking changes we've been discussing off-list...
Quoted 49 lines
drivers/scsi/ibmvscsi/ibmvfc.c +45
-0+ evt->done (evt); +spin_lock_irqsave (vhost->host->host_lock, flags); +} + +static struct ibmvfc_crq *ibmvfc_next_scrq (struct ibmvfc_sub_queue *scrq) +{ +struct ibmvfc_crq *crq; + + crq = &scrq->msgs[scrq->cur].crq; +if (crq->valid &0x80 ) { +if (++scrq->cur == scrq->size) + scrq->cur =0 ; +rmb (); + }else + crq =NULL ; + +return crq; +} + +static void ibmvfc_drain_sub_crq (struct ibmvfc_sub_queue *scrq) +{ +struct ibmvfc_crq *crq; +unsigned long flags; +int done =0 ; + +spin_lock_irqsave (scrq->vhost->host->host_lock, flags); +while (!done) { +while ((crq =ibmvfc_next_scrq (scrq)) !=NULL ) { +ibmvfc_handle_scrq (crq, scrq->vhost); + crq->valid =0 ; +wmb (); + } + +ibmvfc_toggle_scrq_irq (scrq,1 ); +if ((crq =ibmvfc_next_scrq (scrq)) !=NULL ) { +ibmvfc_toggle_scrq_irq (scrq,0 ); +ibmvfc_handle_scrq (crq, scrq->vhost); + crq->valid =0 ; +wmb (); + }else + done =1 ; + } +spin_unlock_irqrestore (scrq->vhost->host->host_lock, flags); +} +/** * ibmvfc_init_tgt - Set the next init job step for the target * @tgt: ibmvfc target struct
Signature · 3 lines
Brian King Power Linux I/O IBM Linux Technology Center
Tyrel Datwyler
maintainerRe: [PATCH v3 06/18] ibmvfc: add handlers to drain and complete Sub-CRQ responses
Quoted 57 lines · Brian King
Quoted 41 lines · Tyrel Datwyler
The logic for iterating over the Sub-CRQ responses is similiar to that of the primary CRQ. Add the necessary handlers for processing those responses.
Signed-off-by Tyrel Datwyler <[email protected]>--- drivers/scsi/ibmvscsi/ibmvfc.c | 80 ++++++++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+)drivers/scsi/ibmvscsi/ibmvfc.c +24
-0@@ -3381,6 +3381,86 @@ static int ibmvfc_toggle_scrq_irq(struct ibmvfc_sub_queue *scrq, int enable)return rc; } +static void ibmvfc_handle_scrq (struct ibmvfc_crq *crq,struct ibmvfc_host *vhost) +{ +struct ibmvfc_event *evt = (struct ibmvfc_event *)be64_to_cpu (crq->ioba); +unsigned long flags; + +switch (crq->valid) { +case IBMVFC_CRQ_CMD_RSP : +break ; +case IBMVFC_CRQ_XPORT_EVENT : +return ; +default : +dev_err (vhost->dev,"Got and invalid message type 0x%02x\n" , crq->valid); +return ; + } + +/* The only kind of payload CRQs we should get are responses to +* things we send. Make sure this response is to something we +* actually sent +*/ +if (unlikely (!ibmvfc_valid_event (&vhost->pool, evt))) { +dev_err (vhost->dev,"Returned correlation_token 0x%08llx is invalid!\n" , + crq->ioba); +return ; + }drivers/scsi/ibmvscsi/ibmvfc.c static int ibmvfc_toggle_scrq_irq(struct ibmvfc_sub_queue *scrq, int enable) · line 3417
Quoted 10 lines
drivers/scsi/ibmvscsi/ibmvfc.c +10
-0+ +if (unlikely (atomic_read (&evt->free))) { +dev_err (vhost->dev,"Received duplicate correlation_token 0x%08llx!\n" , + crq->ioba); +return ; + } + +del_timer (&evt->timer); +list_del (&evt->queue); + ibmvfc_trc_end(evt);> + spin_unlock_irqrestore(vhost->host->host_lock, flags);You can't do this here... You are grabbing the host lock in
ibmvfc_drain_sub_crqand saving the irqflags to a local in that function, then doing aspin_unlock_irqrestoreand restoring irqflags using an uninitialized local in this function...
Quoted 1 line
I'm assuming this will get sorted out with the locking changes we've been discussing off-list...
Correct, moving to per-queue locks and flags stored in the queue struct.
-Tyrel
Quoted 53 lines
Quoted 51 lines
drivers/scsi/ibmvscsi/ibmvfc.c +45
-0+ evt->done (evt); +spin_lock_irqsave (vhost->host->host_lock, flags); +} + +static struct ibmvfc_crq *ibmvfc_next_scrq (struct ibmvfc_sub_queue *scrq) +{ +struct ibmvfc_crq *crq; + + crq = &scrq->msgs[scrq->cur].crq; +if (crq->valid &0x80 ) { +if (++scrq->cur == scrq->size) + scrq->cur =0 ; +rmb (); + }else + crq =NULL ; + +return crq; +} + +static void ibmvfc_drain_sub_crq (struct ibmvfc_sub_queue *scrq) +{ +struct ibmvfc_crq *crq; +unsigned long flags; +int done =0 ; + +spin_lock_irqsave (scrq->vhost->host->host_lock, flags); +while (!done) { +while ((crq =ibmvfc_next_scrq (scrq)) !=NULL ) { +ibmvfc_handle_scrq (crq, scrq->vhost); + crq->valid =0 ; +wmb (); + } + +ibmvfc_toggle_scrq_irq (scrq,1 ); +if ((crq =ibmvfc_next_scrq (scrq)) !=NULL ) { +ibmvfc_toggle_scrq_irq (scrq,0 ); +ibmvfc_handle_scrq (crq, scrq->vhost); + crq->valid =0 ; +wmb (); + }else + done =1 ; + } +spin_unlock_irqrestore (scrq->vhost->host->host_lock, flags); +} +/** * ibmvfc_init_tgt - Set the next init job step for the target * @tgt: ibmvfc target struct
Tyrel Datwyler
maintainerPATCH v3 7/18 ibmvfc: define Sub-CRQ interrupt handler routine
In reply to Tyrel DatwylerSimple handler that calls Sub-CRQ drain routine directly.
--- drivers/scsi/ibmvscsi/ibmvfc.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
drivers/scsi/ibmvscsi/ibmvfc.c +10 -0
@@ -3461,6 +3461,16 @@ static void ibmvfc_drain_sub_crq(struct ibmvfc_sub_queue *scrq)spin_unlock_irqrestore (scrq->vhost->host->host_lock, flags); } +static irqreturn_t ibmvfc_interrupt_scsi (int irq,void *scrq_instance) +{ +struct ibmvfc_sub_queue *scrq = (struct ibmvfc_sub_queue *)scrq_instance; + +ibmvfc_toggle_scrq_irq (scrq,0 ); +ibmvfc_drain_sub_crq (scrq); + +return IRQ_HANDLED ; +} +/** * ibmvfc_init_tgt - Set the next init job step for the target * @tgt: ibmvfc target struct
Signature · 1 line
2.27.0
Tyrel Datwyler
maintainerPATCH v3 8/18 ibmvfc: map/request irq and register Sub-CRQ interrupt handler
In reply to Tyrel DatwylerCreate an irq mapping for the hw_irq number provided from phyp firmware. Request an irq assigned our Sub-CRQ interrupt handler.
--- drivers/scsi/ibmvscsi/ibmvfc.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
drivers/scsi/ibmvscsi/ibmvfc.c +22 -0
@@ -5134,12 +5134,34 @@ static int ibmvfc_register_scsi_channel(struct ibmvfc_host *vhost, goto reg_failed; } + scrq->irq =irq_create_mapping (NULL , scrq->hw_irq); + +if (!scrq->irq) { + rc = -EINVAL ; +dev_err (dev,"Error mapping sub-crq[%d] irq\n" , index); + goto irq_failed; + } + +snprintf (scrq->name,sizeof (scrq->name),"ibmvfc-%x-scsi%d" , + vdev->unit_address, index); + rc =request_irq (scrq->irq, ibmvfc_interrupt_scsi,0 , scrq->name, scrq); + +if (rc) { +dev_err (dev,"Couldn't register sub-crq[%d] irq\n" , index); +irq_dispose_mapping (scrq->irq); + goto irq_failed; + } + scrq->hwq_id = index; scrq->vhost = vhost;LEAVE ;return 0 ; +irq_failed: +do { +plpar_hcall_norets (H_FREE_SUB_CRQ , vdev->unit_address, scrq->cookie); + }while (rc ==H_BUSY ||H_IS_LONG_BUSY (rc)); reg_failed:dma_unmap_single (dev, scrq->msg_token,PAGE_SIZE ,DMA_BIDIRECTIONAL ); dma_map_failed:
Signature · 1 line
2.27.0
Tyrel Datwyler
maintainerPATCH v3 9/18 ibmvfc: implement channel enquiry and setup commands
In reply to Tyrel DatwylerNew NPIV_ENQUIRY_CHANNEL and NPIV_SETUP_CHANNEL management datagrams (MADs) were defined in a previous patchset. If the client advertises a desire to use channels and the partner VIOS is channel capable then the client must proceed with channel enquiry to determine the maximum number of channels the VIOS is capable of providing, and registering SubCRQs via channel setup with the VIOS immediately following NPIV Login. This handshaking should not be performed for subsequent NPIV Logins unless the CRQ connection has been reset.
Implement these two new MADs and issue them following a successful NPIV login where the VIOS has set the SUPPORT_CHANNELS capability bit in the NPIV Login response.
--- drivers/scsi/ibmvscsi/ibmvfc.c | 135 ++++++++++++++++++++++++++++++++- drivers/scsi/ibmvscsi/ibmvfc.h | 3 + 2 files changed, 136 insertions(+), 2 deletions(-)
drivers/scsi/ibmvscsi/ibmvfc.c +133 -2
@@ -806,6 +806,8 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost)spin_lock_irqsave (vhost->host->host_lock, flags); vhost->state =IBMVFC_NO_CRQ ; vhost->logged_in =0 ; + vhost->do_enquiry =1 ; + vhost->using_channels =0 ;/* Clean out the queue */ memset (crq->msgs,0 ,PAGE_SIZE );
@@ -4476,6 +4478,118 @@ static void ibmvfc_discover_targets(struct ibmvfc_host *vhost)ibmvfc_link_down (vhost,IBMVFC_LINK_DEAD ); } +static void ibmvfc_channel_setup_done (struct ibmvfc_event *evt) +{ +struct ibmvfc_host *vhost = evt->vhost; +u32 mad_status =be16_to_cpu (evt->xfer_iu->channel_setup.common.status); +int level =IBMVFC_DEFAULT_LOG_LEVEL ; + +ibmvfc_free_event (evt); + +switch (mad_status) { +case IBMVFC_MAD_SUCCESS : +ibmvfc_dbg (vhost,"Channel Setup succeded\n" ); + vhost->do_enquiry =0 ; +break ; +case IBMVFC_MAD_FAILED : + level +=ibmvfc_retry_host_init (vhost); +ibmvfc_log (vhost, level,"Channel Setup failed\n" ); + fallthrough; +case IBMVFC_MAD_DRIVER_FAILED : +return ; +default : +dev_err (vhost->dev,"Invalid Channel Setup response: 0x%x\n" , + mad_status); +ibmvfc_link_down (vhost,IBMVFC_LINK_DEAD ); +return ; + } + +ibmvfc_set_host_action (vhost,IBMVFC_HOST_ACTION_QUERY ); +wake_up (&vhost->work_wait_q); +} + +static void ibmvfc_channel_setup (struct ibmvfc_host *vhost) +{ +struct ibmvfc_channel_setup_mad *mad; +struct ibmvfc_channel_setup *setup_buf = vhost->channel_setup_buf; +struct ibmvfc_event *evt =ibmvfc_get_event (vhost); + +memset (setup_buf,0 ,sizeof (*setup_buf)); + setup_buf->flags =cpu_to_be32 (IBMVFC_CANCEL_CHANNELS ); + +ibmvfc_init_event (evt, ibmvfc_channel_setup_done,IBMVFC_MAD_FORMAT ); + mad = &evt->iu.channel_setup; +memset (mad,0 ,sizeof (*mad)); + mad->common.version =cpu_to_be32 (1 ); + mad->common.opcode =cpu_to_be32 (IBMVFC_CHANNEL_SETUP ); + mad->common.length =cpu_to_be16 (sizeof (*mad)); + mad->buffer.va =cpu_to_be64 (vhost->channel_setup_dma); + mad->buffer.len =cpu_to_be32 (sizeof (*vhost->channel_setup_buf)); + +ibmvfc_set_host_action (vhost,IBMVFC_HOST_ACTION_INIT_WAIT ); + +if (!ibmvfc_send_event (evt, vhost, default_timeout)) +ibmvfc_dbg (vhost,"Sent channel setup\n" ); +else +ibmvfc_link_down (vhost,IBMVFC_LINK_DOWN ); +} + +static void ibmvfc_channel_enquiry_done (struct ibmvfc_event *evt) +{ +struct ibmvfc_host *vhost = evt->vhost; +struct ibmvfc_channel_enquiry *rsp = &evt->xfer_iu->channel_enquiry; +u32 mad_status =be16_to_cpu (rsp->common.status); +int level =IBMVFC_DEFAULT_LOG_LEVEL ; + +switch (mad_status) { +case IBMVFC_MAD_SUCCESS : +ibmvfc_dbg (vhost,"Channel Enquiry succeeded\n" ); + vhost->max_vios_scsi_channels =be32_to_cpu (rsp->num_scsi_subq_channels); +ibmvfc_free_event (evt); +break ; +case IBMVFC_MAD_FAILED : + level +=ibmvfc_retry_host_init (vhost); +ibmvfc_log (vhost, level,"Channel Enquiry failed\n" ); + fallthrough; +case IBMVFC_MAD_DRIVER_FAILED : +ibmvfc_free_event (evt); +return ; +default : +dev_err (vhost->dev,"Invalid Channel Enquiry response: 0x%x\n" , + mad_status); +ibmvfc_link_down (vhost,IBMVFC_LINK_DEAD ); +ibmvfc_free_event (evt); +return ; + } + +ibmvfc_channel_setup (vhost); +} + +static void ibmvfc_channel_enquiry (struct ibmvfc_host *vhost) +{ +struct ibmvfc_channel_enquiry *mad; +struct ibmvfc_event *evt =ibmvfc_get_event (vhost); + +ibmvfc_init_event (evt, ibmvfc_channel_enquiry_done,IBMVFC_MAD_FORMAT ); + mad = &evt->iu.channel_enquiry; +memset (mad,0 ,sizeof (*mad)); + mad->common.version =cpu_to_be32 (1 ); + mad->common.opcode =cpu_to_be32 (IBMVFC_CHANNEL_ENQUIRY ); + mad->common.length =cpu_to_be16 (sizeof (*mad)); + +if (IBMVFC_MIG_NO_SUB_TO_CRQ ) + mad->flags |=cpu_to_be32 (IBMVFC_NO_CHANNELS_TO_CRQ_SUPPORT ); +if (IBMVFC_MIG_NO_N_TO_M ) + mad->flags |=cpu_to_be32 (IBMVFC_NO_N_TO_M_CHANNELS_SUPPORT ); + +ibmvfc_set_host_action (vhost,IBMVFC_HOST_ACTION_INIT_WAIT ); + +if (!ibmvfc_send_event (evt, vhost, default_timeout)) +ibmvfc_dbg (vhost,"Send channel enquiry\n" ); +else +ibmvfc_link_down (vhost,IBMVFC_LINK_DEAD ); +} +/** * ibmvfc_npiv_login_done - Completion handler for NPIV Login * @evt: ibmvfc event struct
@@ -4557,8 +4671,14 @@ static void ibmvfc_npiv_login_done(struct ibmvfc_event *evt) vhost->host->can_queue =be32_to_cpu (rsp->max_cmds) -IBMVFC_NUM_INTERNAL_REQ ; vhost->host->max_sectors = npiv_max_sectors; -ibmvfc_set_host_action (vhost,IBMVFC_HOST_ACTION_QUERY ); -wake_up (&vhost->work_wait_q); + +if (ibmvfc_check_caps (vhost,IBMVFC_CAN_SUPPORT_CHANNELS ) && vhost->do_enquiry) { +ibmvfc_channel_enquiry (vhost); + }else { + vhost->do_enquiry =0 ; +ibmvfc_set_host_action (vhost,IBMVFC_HOST_ACTION_QUERY ); +wake_up (&vhost->work_wait_q); + } }/**
@@ -5331,9 +5451,20 @@ static int ibmvfc_alloc_mem(struct ibmvfc_host *vhost) goto free_trace; } + vhost->channel_setup_buf =dma_alloc_coherent (dev,sizeof (*vhost->channel_setup_buf), + &vhost->channel_setup_dma, +GFP_KERNEL ); + +if (!vhost->channel_setup_buf) { +dev_err (dev,"Couldn't allocate Channel Setup buffer\n" ); + goto free_tgt_pool; + } +LEAVE ;return 0 ; +free_tgt_pool: +mempool_destroy (vhost->tgt_pool); free_trace:kfree (vhost->trace); free_disc_buffer:
drivers/scsi/ibmvscsi/ibmvfc.h +3 -0
@@ -842,10 +842,13 @@ struct ibmvfc_host {struct ibmvfc_npiv_login login_info;union ibmvfc_npiv_login_data *login_buf;dma_addr_t login_buf_dma; +struct ibmvfc_channel_setup *channel_setup_buf; +dma_addr_t channel_setup_dma;int disc_buf_sz;int log_level;struct ibmvfc_discover_targets_entry *disc_buf;struct mutex passthru_mutex; +int max_vios_scsi_channels;int task_set;int init_retries;int discovery_threads;
Signature · 1 line
2.27.0
Tyrel Datwyler
maintainerPATCH v3 10/18 ibmvfc: advertise client support for using hardware channels
In reply to Tyrel DatwylerPrevious patches have plumbed the necessary Sub-CRQ interface and channel negotiation MADs to fully channelized hardware queues.
Advertise client support via NPIV Login capability IBMVFC_CAN_USE_CHANNELS when the client bits have MQ enabled via vhost->mq_enabled, or when channels were already in use during a subsequent NPIV Login. The later is required because channel support is only renegotiated after a CRQ pair is broken. Simple NPIV Logout/Logins require the client to continue to advertise the channel capability until the CRQ pair between the client is broken.
--- drivers/scsi/ibmvscsi/ibmvfc.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/scsi/ibmvscsi/ibmvfc.c +4 -0
@@ -1282,6 +1282,10 @@ static void ibmvfc_set_login_info(struct ibmvfc_host *vhost) login_info->max_cmds =cpu_to_be32 (max_requests +IBMVFC_NUM_INTERNAL_REQ ); login_info->capabilities =cpu_to_be64 (IBMVFC_CAN_MIGRATE |IBMVFC_CAN_SEND_VF_WWPN ); + +if (vhost->mq_enabled || vhost->using_channels) + login_info->capabilities |=cpu_to_be64 (IBMVFC_CAN_USE_CHANNELS ); + login_info->async.va =cpu_to_be64 (vhost->async_crq.msg_token); login_info->async.len =cpu_to_be32 (vhost->async_crq.size *sizeof (*vhost->async_crq.msgs));strncpy (login_info->partition_name, vhost->partition_name,IBMVFC_MAX_NAME );
Signature · 1 line
2.27.0
Tyrel Datwyler
maintainerPATCH v3 11/18 ibmvfc: set and track hw queue in ibmvfc_event struct
In reply to Tyrel DatwylerExtract the hwq id from a SCSI command and store it in the ibmvfc_event structure to identify which Sub-CRQ to send the command down when channels are being utilized.
--- drivers/scsi/ibmvscsi/ibmvfc.c | 5 +++++ drivers/scsi/ibmvscsi/ibmvfc.h | 1 + 2 files changed, 6 insertions(+)
drivers/scsi/ibmvscsi/ibmvfc.c +5 -0
@@ -1397,6 +1397,7 @@ static void ibmvfc_init_event(struct ibmvfc_event *evt, evt->crq.format = format; evt->done = done; evt->eh_comp =NULL ; + evt->hwq =0 ; }/**
@@ -1748,6 +1749,8 @@ static int ibmvfc_queuecommand_lck(struct scsi_cmnd *cmnd,struct ibmvfc_cmd *vfc_cmd;struct ibmvfc_fcp_cmd_iu *iu;struct ibmvfc_event *evt; +u32 tag_and_hwq =blk_mq_unique_tag (cmnd->request); +u16 hwq =blk_mq_unique_tag_to_hwq (tag_and_hwq);int rc; if (unlikely((rc = fc_remote_port_chkready(rport))) ||
@@ -1775,6 +1778,8 @@ static int ibmvfc_queuecommand_lck(struct scsi_cmnd *cmnd, } vfc_cmd->correlation =cpu_to_be64 (evt); +if (vhost->using_channels) + evt->hwq = hwq % vhost->scsi_scrqs.active_queues;if (likely (!(rc =ibmvfc_map_sg_data (cmnd, evt, vfc_cmd, vhost->dev))))return ibmvfc_send_event (evt, vhost,0 );
drivers/scsi/ibmvscsi/ibmvfc.h +1 -0
@@ -781,6 +781,7 @@ struct ibmvfc_event {struct completion comp;struct completion *eh_comp;struct timer_list timer; +u16 hwq; };/* a pool of event structs for use */
Signature · 1 line
2.27.0
Tyrel Datwyler
maintainerPATCH v3 12/18 ibmvfc: send commands down HW Sub-CRQ when channelized
In reply to Tyrel DatwylerWhen the client has negotiated the use of channels all vfcFrames are required to go down a Sub-CRQ channel or it is a protocoal violation. If the adapter state is channelized submit vfcFrames to the appropriate Sub-CRQ via the h_send_sub_crq() helper.
--- drivers/scsi/ibmvscsi/ibmvfc.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-)
drivers/scsi/ibmvscsi/ibmvfc.c +27 -5
@@ -701,6 +701,15 @@ static int ibmvfc_send_crq(struct ibmvfc_host *vhost, u64 word1, u64 word2)return plpar_hcall_norets (H_SEND_CRQ , vdev->unit_address, word1, word2); } +static int ibmvfc_send_sub_crq (struct ibmvfc_host *vhost,u64 cookie,u64 word1, +u64 word2,u64 word3,u64 word4) +{ +struct vio_dev *vdev =to_vio_dev (vhost->dev); + +return plpar_hcall_norets (H_SEND_SUB_CRQ , vdev->unit_address, cookie, + word1, word2, word3, word4); +} +/** * ibmvfc_send_crq_init - Send a CRQ init message * @vhost: ibmvfc host struct
@@ -1513,15 +1522,19 @@ static int ibmvfc_send_event(struct ibmvfc_event *evt, struct ibmvfc_host *vhost, unsigned long timeout) {__be64 *crq_as_u64 = (__be64 *) &evt->crq; +int channel_cmd =0 ;int rc;/* Copy the IU into the transfer area */ *evt->xfer_iu = evt->iu; -if (evt->crq.format ==IBMVFC_CMD_FORMAT ) +if (evt->crq.format ==IBMVFC_CMD_FORMAT ) { evt->xfer_iu->cmd.tag =cpu_to_be64 ((u64 )evt); -else if (evt->crq.format ==IBMVFC_MAD_FORMAT ) + channel_cmd =1 ; + }else if (evt->crq.format ==IBMVFC_MAD_FORMAT ) { evt->xfer_iu->mad_common.tag =cpu_to_be64 ((u64 )evt); -else +if (evt->xfer_iu->mad_common.opcode ==IBMVFC_TMF_MAD ) + channel_cmd =1 ; + }else BUG ();list_add_tail (&evt->queue, &vhost->sent);
@@ -1534,8 +1547,17 @@ static int ibmvfc_send_event(struct ibmvfc_event *evt,mb (); -if ((rc =ibmvfc_send_crq (vhost,be64_to_cpu (crq_as_u64[0 ]), -be64_to_cpu (crq_as_u64[1 ])))) { +if (vhost->using_channels && channel_cmd) + rc =ibmvfc_send_sub_crq (vhost, + vhost->scsi_scrqs.scrqs[evt->hwq].vios_cookie, +be64_to_cpu (crq_as_u64[0 ]), +be64_to_cpu (crq_as_u64[1 ]), +0 ,0 ); +else + rc =ibmvfc_send_crq (vhost,be64_to_cpu (crq_as_u64[0 ]), +be64_to_cpu (crq_as_u64[1 ])); + +if (rc) {list_del (&evt->queue);del_timer (&evt->timer);
Signature · 1 line
2.27.0
Tyrel Datwyler
maintainerPATCH v3 13/18 ibmvfc: register Sub-CRQ handles with VIOS during channel setup
In reply to Tyrel DatwylerIf the ibmvfc client adapter requests channels it must submit a number of Sub-CRQ handles matching the number of channels being requested. The VIOS in its response will overwrite the actual number of channel resources allocated which may be less than what was requested. The client then must store the VIOS Sub-CRQ handle for each queue. This VIOS handle is needed as a parameter with h_send_sub_crq().
--- drivers/scsi/ibmvscsi/ibmvfc.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-)
drivers/scsi/ibmvscsi/ibmvfc.c +31 -1
@@ -4512,15 +4512,35 @@ static void ibmvfc_discover_targets(struct ibmvfc_host *vhost)static void ibmvfc_channel_setup_done (struct ibmvfc_event *evt) {struct ibmvfc_host *vhost = evt->vhost; +struct ibmvfc_channel_setup *setup = vhost->channel_setup_buf; +struct ibmvfc_scsi_channels *scrqs = &vhost->scsi_scrqs;u32 mad_status =be16_to_cpu (evt->xfer_iu->channel_setup.common.status);int level =IBMVFC_DEFAULT_LOG_LEVEL ; +int flags, active_queues, i;ibmvfc_free_event (evt);switch (mad_status) {case IBMVFC_MAD_SUCCESS :ibmvfc_dbg (vhost,"Channel Setup succeded\n" ); + flags =be32_to_cpu (setup->flags); vhost->do_enquiry =0 ; + active_queues =be32_to_cpu (setup->num_scsi_subq_channels); + scrqs->active_queues = active_queues; + +if (flags &IBMVFC_CHANNELS_CANCELED ) { +ibmvfc_dbg (vhost,"Channels Canceled\n" ); + vhost->using_channels =0 ; + }else { +if (active_queues) + vhost->using_channels =1 ; +for (i =0 ; i < active_queues; i++) + scrqs->scrqs[i].vios_cookie = +be64_to_cpu (setup->channel_handles[i]); + +ibmvfc_dbg (vhost,"Using %u channels\n" , + vhost->scsi_scrqs.active_queues); + }break ;case IBMVFC_MAD_FAILED : level +=ibmvfc_retry_host_init (vhost);
@@ -4544,9 +4564,19 @@ static void ibmvfc_channel_setup(struct ibmvfc_host *vhost)struct ibmvfc_channel_setup_mad *mad;struct ibmvfc_channel_setup *setup_buf = vhost->channel_setup_buf;struct ibmvfc_event *evt =ibmvfc_get_event (vhost); +struct ibmvfc_scsi_channels *scrqs = &vhost->scsi_scrqs; +unsigned int num_channels = +min (vhost->client_scsi_channels, vhost->max_vios_scsi_channels); +int i;memset (setup_buf,0 ,sizeof (*setup_buf)); - setup_buf->flags =cpu_to_be32 (IBMVFC_CANCEL_CHANNELS ); +if (num_channels ==0 ) + setup_buf->flags =cpu_to_be32 (IBMVFC_CANCEL_CHANNELS ); +else { + setup_buf->num_scsi_subq_channels =cpu_to_be32 (num_channels); +for (i =0 ; i < num_channels; i++) + setup_buf->channel_handles[i] =cpu_to_be64 (scrqs->scrqs[i].cookie); + }ibmvfc_init_event (evt, ibmvfc_channel_setup_done,IBMVFC_MAD_FORMAT ); mad = &evt->iu.channel_setup;
Signature · 1 line
2.27.0
Tyrel Datwyler
maintainerPATCH v3 14/18 ibmvfc: add cancel mad initialization helper
In reply to Tyrel DatwylerAdd a helper routine for initializing a Cancel MAD. This will be useful for a channelized client that needs to send a Cancel commands down every channel commands were sent for a particular LUN.
--- drivers/scsi/ibmvscsi/ibmvfc.c | 67 ++++++++++++++++++++-------------- 1 file changed, 39 insertions(+), 28 deletions(-)
drivers/scsi/ibmvscsi/ibmvfc.c +39 -28
@@ -2286,6 +2286,44 @@ static int ibmvfc_wait_for_ops(struct ibmvfc_host *vhost, void *device,return SUCCESS ; } +static struct ibmvfc_event *ibmvfc_init_tmf (struct ibmvfc_host *vhost, +struct scsi_device *sdev, +int type) +{ +struct scsi_target *starget =scsi_target (sdev); +struct fc_rport *rport =starget_to_rport (starget); +struct ibmvfc_event *evt; +struct ibmvfc_tmf *tmf; + + evt =ibmvfc_get_event (vhost); +ibmvfc_init_event (evt, ibmvfc_sync_completion,IBMVFC_MAD_FORMAT ); + + tmf = &evt->iu.tmf; +memset (tmf,0 ,sizeof (*tmf)); +if (ibmvfc_check_caps (vhost,IBMVFC_HANDLE_VF_WWPN )) { + tmf->common.version =cpu_to_be32 (2 ); + tmf->target_wwpn =cpu_to_be64 (rport->port_name); + }else { + tmf->common.version =cpu_to_be32 (1 ); + } + tmf->common.opcode =cpu_to_be32 (IBMVFC_TMF_MAD ); + tmf->common.length =cpu_to_be16 (sizeof (*tmf)); + tmf->scsi_id =cpu_to_be64 (rport->port_id); +int_to_scsilun (sdev->lun, &tmf->lun); +if (!ibmvfc_check_caps (vhost,IBMVFC_CAN_SUPPRESS_ABTS )) + type &= ~IBMVFC_TMF_SUPPRESS_ABTS ; +if (vhost->state ==IBMVFC_ACTIVE ) + tmf->flags =cpu_to_be32 ((type |IBMVFC_TMF_LUA_VALID )); +else + tmf->flags =cpu_to_be32 (((type &IBMVFC_TMF_SUPPRESS_ABTS ) |IBMVFC_TMF_LUA_VALID )); + tmf->cancel_key =cpu_to_be32 ((unsigned long )sdev->hostdata); + tmf->my_cancel_key =cpu_to_be32 ((unsigned long )starget->hostdata); + +init_completion (&evt->comp); + +return evt; +} +/** * ibmvfc_cancel_all - Cancel all outstanding commands to the device * @sdev: scsi device to cancel commands
@@ -2300,9 +2338,6 @@ static int ibmvfc_wait_for_ops(struct ibmvfc_host *vhost, void *device,static int ibmvfc_cancel_all (struct scsi_device *sdev,int type) {struct ibmvfc_host *vhost =shost_priv (sdev->host); -struct scsi_target *starget =scsi_target (sdev); -struct fc_rport *rport =starget_to_rport (starget); -struct ibmvfc_tmf *tmf;struct ibmvfc_event *evt, *found_evt;union ibmvfc_iu rsp;int rsp_rc = -EBUSY ;
@@ -2327,32 +2362,8 @@ static int ibmvfc_cancel_all(struct scsi_device *sdev, int type) }if (vhost->logged_in) { - evt =ibmvfc_get_event (vhost); -ibmvfc_init_event (evt, ibmvfc_sync_completion,IBMVFC_MAD_FORMAT ); - - tmf = &evt->iu.tmf; -memset (tmf,0 ,sizeof (*tmf)); -if (ibmvfc_check_caps (vhost,IBMVFC_HANDLE_VF_WWPN )) { - tmf->common.version =cpu_to_be32 (2 ); - tmf->target_wwpn =cpu_to_be64 (rport->port_name); - }else { - tmf->common.version =cpu_to_be32 (1 ); - } - tmf->common.opcode =cpu_to_be32 (IBMVFC_TMF_MAD ); - tmf->common.length =cpu_to_be16 (sizeof (*tmf)); - tmf->scsi_id =cpu_to_be64 (rport->port_id); -int_to_scsilun (sdev->lun, &tmf->lun); -if (!ibmvfc_check_caps (vhost,IBMVFC_CAN_SUPPRESS_ABTS )) - type &= ~IBMVFC_TMF_SUPPRESS_ABTS ; -if (vhost->state ==IBMVFC_ACTIVE ) - tmf->flags =cpu_to_be32 ((type |IBMVFC_TMF_LUA_VALID )); -else - tmf->flags =cpu_to_be32 (((type &IBMVFC_TMF_SUPPRESS_ABTS ) |IBMVFC_TMF_LUA_VALID )); - tmf->cancel_key =cpu_to_be32 ((unsigned long )sdev->hostdata); - tmf->my_cancel_key =cpu_to_be32 ((unsigned long )starget->hostdata); - + evt =ibmvfc_init_tmf (vhost, sdev, type); evt->sync_iu = &rsp; -init_completion (&evt->comp); rsp_rc =ibmvfc_send_event (evt, vhost, default_timeout); }
Signature · 1 line
2.27.0
Tyrel Datwyler
maintainerPATCH v3 15/18 ibmvfc: send Cancel MAD down each hw scsi channel
In reply to Tyrel DatwylerIn general the client needs to send Cancel MADs and task management commands down the same channel as the command(s) intended to cancel or abort. The client assigns cancel keys per LUN and thus must send a Cancel down each channel commands were submitted for that LUN. Further, the client then must wait for those cancel completions prior to submitting a LUN RESET or ABORT TASK SET.
Add a cancel event pointer and cancel rsp iu storage to the ibmvfc_sub_queue struct such that the cancel routine can assign a cancel event to each applicable queue. When in legacy CRQ mode we fake treating it as a subqueue by using a subqueue struct allocated on the stack. Wait for completion of each submitted cancel.
--- drivers/scsi/ibmvscsi/ibmvfc.c | 104 ++++++++++++++++++++++----------- drivers/scsi/ibmvscsi/ibmvfc.h | 38 ++++++------ 2 files changed, 90 insertions(+), 52 deletions(-)
drivers/scsi/ibmvscsi/ibmvfc.c +70 -34
@@ -2339,67 +2339,103 @@ static int ibmvfc_cancel_all(struct scsi_device *sdev, int type) {struct ibmvfc_host *vhost =shost_priv (sdev->host);struct ibmvfc_event *evt, *found_evt; -union ibmvfc_iu rsp; -int rsp_rc = -EBUSY ; +struct ibmvfc_sub_queue *scrqs; +struct ibmvfc_sub_queue legacy_crq; +int rsp_rc =0 ;unsigned long flags;u16 status; +int cancel_cnt =0 ; +int num_hwq; +int ret =0 ; +int i;ENTER ;spin_lock_irqsave (vhost->host->host_lock, flags); - found_evt =NULL ; -list_for_each_entry (evt, &vhost->sent, queue) { -if (evt->cmnd && evt->cmnd->device == sdev) { - found_evt = evt; +if (vhost->using_channels && vhost->scsi_scrqs.active_queues) { + num_hwq = vhost->scsi_scrqs.active_queues; + scrqs = vhost->scsi_scrqs.scrqs; + }else { +/* Use ibmvfc_sub_queue on the stack to fake legacy CRQ as a subqueue */ + num_hwq =1 ; + scrqs = &legacy_crq; + } + +for (i =0 ; i < num_hwq; i++) { + scrqs[i].cancel_event =NULL ; + found_evt =NULL ; +list_for_each_entry (evt, &vhost->sent, queue) { +if (evt->cmnd && evt->cmnd->device == sdev && evt->hwq == i) { + found_evt = evt; + cancel_cnt++; +break ; + } + } + +if (!found_evt) +continue ; + +if (vhost->logged_in) { + scrqs[i].cancel_event =ibmvfc_init_tmf (vhost, sdev, type); + scrqs[i].cancel_event->hwq = i; + scrqs[i].cancel_event->sync_iu = &scrqs[i].cancel_rsp; + rsp_rc =ibmvfc_send_event (scrqs[i].cancel_event, vhost, default_timeout); +if (rsp_rc) +break ; + }else { + rsp_rc = -EBUSY ;break ; } } -if (!found_evt) { +spin_unlock_irqrestore (vhost->host->host_lock, flags); + +if (!cancel_cnt) {if (vhost->log_level >IBMVFC_DEFAULT_LOG_LEVEL )sdev_printk (KERN_INFO , sdev,"No events found to cancel\n" ); -spin_unlock_irqrestore (vhost->host->host_lock, flags);return 0 ; } -if (vhost->logged_in) { - evt =ibmvfc_init_tmf (vhost, sdev, type); - evt->sync_iu = &rsp; - rsp_rc =ibmvfc_send_event (evt, vhost, default_timeout); - } - -spin_unlock_irqrestore (vhost->host->host_lock, flags); -if (rsp_rc !=0 ) {sdev_printk (KERN_ERR , sdev,"Failed to send cancel event. rc=%d\n" , rsp_rc);/* If failure is received, the host adapter is most likely going through reset, return success so the caller will wait for the command being cancelled to get returned */ -return 0 ; + goto free_events; }sdev_printk (KERN_INFO , sdev,"Cancelling outstanding commands.\n" ); -wait_for_completion (&evt->comp); - status =be16_to_cpu (rsp.mad_common.status); -spin_lock_irqsave (vhost->host->host_lock, flags); -ibmvfc_free_event (evt); -spin_unlock_irqrestore (vhost->host->host_lock, flags); +for (i =0 ; i < num_hwq; i++) { +if (!scrqs[i].cancel_event) +continue ; -if (status !=IBMVFC_MAD_SUCCESS ) { -sdev_printk (KERN_WARNING , sdev,"Cancel failed with rc=%x\n" , status); -switch (status) { -case IBMVFC_MAD_DRIVER_FAILED : -case IBMVFC_MAD_CRQ_ERROR : -/* Host adapter most likely going through reset, return success to -the caller will wait for the command being cancelled to get returned */ -return 0 ; -default : -return -EIO ; - }; +wait_for_completion (&scrqs[i].cancel_event->comp); + status =be16_to_cpu (scrqs[i].cancel_rsp.mad_common.status); + +if (status !=IBMVFC_MAD_SUCCESS ) { +sdev_printk (KERN_WARNING , sdev,"Cancel failed with rc=%x\n" , status); +switch (status) { +case IBMVFC_MAD_DRIVER_FAILED : +case IBMVFC_MAD_CRQ_ERROR : +/* Host adapter most likely going through reset, return success to +the caller will wait for the command being cancelled to get returned */ + goto free_events; +default : + ret = -EIO ; + goto free_events; + }; + } }sdev_printk (KERN_INFO , sdev,"Successfully cancelled outstanding commands\n" ); -return 0 ; +free_events: +spin_lock_irqsave (vhost->host->host_lock, flags); +for (i =0 ; i < num_hwq; i++) +if (scrqs[i].cancel_event) +ibmvfc_free_event (scrqs[i].cancel_event); +spin_unlock_irqrestore (vhost->host->host_lock, flags); + +return ret; }/**
drivers/scsi/ibmvscsi/ibmvfc.h +20 -18
@@ -584,6 +584,24 @@ struct ibmvfc_connection_info {__be64 reserved[16 ]; } __packed__aligned(8) ; +union ibmvfc_iu { +struct ibmvfc_mad_common mad_common; +struct ibmvfc_npiv_login_mad npiv_login; +struct ibmvfc_npiv_logout_mad npiv_logout; +struct ibmvfc_discover_targets discover_targets; +struct ibmvfc_port_login plogi; +struct ibmvfc_process_login prli; +struct ibmvfc_move_login move_login; +struct ibmvfc_query_tgt query_tgt; +struct ibmvfc_implicit_logout implicit_logout; +struct ibmvfc_tmf tmf; +struct ibmvfc_cmd cmd; +struct ibmvfc_passthru_mad passthru; +struct ibmvfc_channel_enquiry channel_enquiry; +struct ibmvfc_channel_setup_mad channel_setup; +struct ibmvfc_connection_info connection_info; +} __packed__aligned(8) ; +struct ibmvfc_trace_start_entry {u32 xfer_len; } __packed;
@@ -666,6 +684,8 @@ struct ibmvfc_sub_queue {dma_addr_t msg_token;int size, cur;struct ibmvfc_host *vhost; +struct ibmvfc_event *cancel_event; +union ibmvfc_iu cancel_rsp;unsigned long cookie;unsigned long vios_cookie;unsigned long hw_irq;
@@ -712,24 +732,6 @@ struct ibmvfc_async_crq_queue {dma_addr_t msg_token; }; -union ibmvfc_iu { -struct ibmvfc_mad_common mad_common; -struct ibmvfc_npiv_login_mad npiv_login; -struct ibmvfc_npiv_logout_mad npiv_logout; -struct ibmvfc_discover_targets discover_targets; -struct ibmvfc_port_login plogi; -struct ibmvfc_process_login prli; -struct ibmvfc_move_login move_login; -struct ibmvfc_query_tgt query_tgt; -struct ibmvfc_implicit_logout implicit_logout; -struct ibmvfc_tmf tmf; -struct ibmvfc_cmd cmd; -struct ibmvfc_passthru_mad passthru; -struct ibmvfc_channel_enquiry channel_enquiry; -struct ibmvfc_channel_setup_mad channel_setup; -struct ibmvfc_connection_info connection_info; -} __packed__aligned(8) ; -enum ibmvfc_target_action {IBMVFC_TGT_ACTION_NONE =0 ,IBMVFC_TGT_ACTION_INIT ,
Signature · 1 line
2.27.0
Re: [PATCH v3 15/18] ibmvfc: send Cancel MAD down each hw scsi channel
Quoted 65 lines · Tyrel Datwyler
In general the client needs to send Cancel MADs and task management commands down the same channel as the command(s) intended to cancel or abort. The client assigns cancel keys per LUN and thus must send a Cancel down each channel commands were submitted for that LUN. Further, the client then must wait for those cancel completions prior to submitting a LUN RESET or ABORT TASK SET.
Add a cancel event pointer and cancel rsp iu storage to the
ibmvfc_sub_queuestruct such that the cancel routine can assign a cancel event to each applicable queue. When in legacy CRQ mode we fake treating it as a subqueue by using a subqueue struct allocated on the stack. Wait for completion of each submitted cancel.Signed-off-by Tyrel Datwyler <[email protected]>--- drivers/scsi/ibmvscsi/ibmvfc.c | 104 ++++++++++++++++++++++----------- drivers/scsi/ibmvscsi/ibmvfc.h | 38 ++++++------ 2 files changed, 90 insertions(+), 52 deletions(-)drivers/scsi/ibmvscsi/ibmvfc.c +27
-6@@ -2339,67 +2339,103 @@ static int ibmvfc_cancel_all(struct scsi_device *sdev, int type) {struct ibmvfc_host *vhost =shost_priv (sdev->host);struct ibmvfc_event *evt, *found_evt; -union ibmvfc_iu rsp; -int rsp_rc = -EBUSY ; +struct ibmvfc_sub_queue *scrqs; +struct ibmvfc_sub_queue legacy_crq; +int rsp_rc =0 ;unsigned long flags;u16 status; +int cancel_cnt =0 ; +int num_hwq; +int ret =0 ; +int i;ENTER ;spin_lock_irqsave (vhost->host->host_lock, flags); - found_evt =NULL ; -list_for_each_entry (evt, &vhost->sent, queue) { -if (evt->cmnd && evt->cmnd->device == sdev) { - found_evt = evt; +if (vhost->using_channels && vhost->scsi_scrqs.active_queues) { + num_hwq = vhost->scsi_scrqs.active_queues; + scrqs = vhost->scsi_scrqs.scrqs; + }else { +/* Use ibmvfc_sub_queue on the stack to fake legacy CRQ as a subqueue */ + num_hwq =1 ; + scrqs = &legacy_crq; + } + +for (i =0 ; i < num_hwq; i++) { + scrqs[i].cancel_event =NULL ; + found_evt =NULL ; +list_for_each_entry (evt, &vhost->sent, queue) { +if (evt->cmnd && evt->cmnd->device == sdev && evt->hwq == i) { + found_evt = evt; + cancel_cnt++; +break ; + } + } +
drivers/scsi/ibmvscsi/ibmvfc.c static int ibmvfc_cancel_all(struct scsi_device *sdev, int type) · line 2383
Quoted 10 lines
drivers/scsi/ibmvscsi/ibmvfc.c +10
-0+if (!found_evt) +continue ; + +if (vhost->logged_in) { + scrqs[i].cancel_event =ibmvfc_init_tmf (vhost, sdev, type); + scrqs[i].cancel_event->hwq = i; + scrqs[i].cancel_event->sync_iu = &scrqs[i].cancel_rsp; + rsp_rc =ibmvfc_send_event (scrqs[i].cancel_event, vhost, default_timeout); +if (rsp_rc) +break ;
It looks like if you have two outstanding commands, on two different hwqs, and you succeed in sending a cancel for the first hwq but fail sending it for the second hwq due to something happening like a xport event of some sort, then you would end up falling down into free_events where you'd call ibmvfc_free_event which will do a list_add_tail to add the event to the free list without having even pulled the event off the sent list, which will result in list corruption as now the free list and sent list will be intermingled. It would probably be better to only free the events if you never sent them or if you are sure they completed. So, you might need to have to wait for the completion of the cancel events that did get sent, which would likely be completed via purge_all.
Quoted 56 lines
drivers/scsi/ibmvscsi/ibmvfc.c +10
-27+ }else { + rsp_rc = -EBUSY ;break ; } } -if (!found_evt) { +spin_unlock_irqrestore (vhost->host->host_lock, flags); + +if (!cancel_cnt) {if (vhost->log_level >IBMVFC_DEFAULT_LOG_LEVEL )sdev_printk (KERN_INFO , sdev,"No events found to cancel\n" ); -spin_unlock_irqrestore (vhost->host->host_lock, flags);return 0 ; } -if (vhost->logged_in) { - evt =ibmvfc_init_tmf (vhost, sdev, type); - evt->sync_iu = &rsp; - rsp_rc =ibmvfc_send_event (evt, vhost, default_timeout); - } - -spin_unlock_irqrestore (vhost->host->host_lock, flags); -if (rsp_rc !=0 ) {sdev_printk (KERN_ERR , sdev,"Failed to send cancel event. rc=%d\n" , rsp_rc);/* If failure is received, the host adapter is most likely going through reset, return success so the caller will wait for the command being cancelled to get returned */ -return 0 ; + goto free_events; }sdev_printk (KERN_INFO , sdev,"Cancelling outstanding commands.\n" ); -wait_for_completion (&evt->comp); - status =be16_to_cpu (rsp.mad_common.status); -spin_lock_irqsave (vhost->host->host_lock, flags); -ibmvfc_free_event (evt); -spin_unlock_irqrestore (vhost->host->host_lock, flags); +for (i =0 ; i < num_hwq; i++) { +if (!scrqs[i].cancel_event) +continue ; -if (status !=IBMVFC_MAD_SUCCESS ) { -sdev_printk (KERN_WARNING , sdev,"Cancel failed with rc=%x\n" , status); -switch (status) { -case IBMVFC_MAD_DRIVER_FAILED : -case IBMVFC_MAD_CRQ_ERROR : -/* Host adapter most likely going through reset, return success to -the caller will wait for the command being cancelled to get returned */ -return 0 ; -default : -return -EIO ; - }; +wait_for_completion (&scrqs[i].cancel_event->comp);
drivers/scsi/ibmvscsi/ibmvfc.c static int ibmvfc_cancel_all(struct scsi_device *sdev, int type) · line 2422
Quoted 10 lines
drivers/scsi/ibmvscsi/ibmvfc.c +10
-0+ status =be16_to_cpu (scrqs[i].cancel_rsp.mad_common.status); + +if (status !=IBMVFC_MAD_SUCCESS ) { +sdev_printk (KERN_WARNING , sdev,"Cancel failed with rc=%x\n" , status); +switch (status) { +case IBMVFC_MAD_DRIVER_FAILED : +case IBMVFC_MAD_CRQ_ERROR : +/* Host adapter most likely going through reset, return success to +the caller will wait for the command being cancelled to get returned */ + goto free_events;
Similar comment here... What about the rest of the outstanding cancel commands? Do you need to wait for those to complete before freeing them?
Quoted 20 lines
drivers/scsi/ibmvscsi/ibmvfc.c +13
-1+default : + ret = -EIO ; + goto free_events; + }; + } }sdev_printk (KERN_INFO , sdev,"Successfully cancelled outstanding commands\n" ); -return 0 ; +free_events: +spin_lock_irqsave (vhost->host->host_lock, flags); +for (i =0 ; i < num_hwq; i++) +if (scrqs[i].cancel_event) +ibmvfc_free_event (scrqs[i].cancel_event); +spin_unlock_irqrestore (vhost->host->host_lock, flags); + +return ret; }/**
Signature · 3 lines
Brian King Power Linux I/O IBM Linux Technology Center
Tyrel Datwyler
maintainerPATCH v3 16/18 ibmvfc: enable MQ and set reasonable defaults
In reply to Tyrel DatwylerTurn on MQ by default and set sane values for the upper limit on hw queues for the scsi host, and number of hw scsi channels to request from the partner VIOS.
--- drivers/scsi/ibmvscsi/ibmvfc.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/scsi/ibmvscsi/ibmvfc.h +3 -3
@@ -41,9 +41,9 @@#define IBMVFC_DEFAULT_LOG_LEVEL 2#define IBMVFC_MAX_CDB_LEN 16#define IBMVFC_CLS3_ERROR 0 -#define IBMVFC_MQ 0 -#define IBMVFC_SCSI_CHANNELS 0 -#define IBMVFC_SCSI_HW_QUEUES 1 +#define IBMVFC_MQ 1 +#define IBMVFC_SCSI_CHANNELS 8 +#define IBMVFC_SCSI_HW_QUEUES 16#define IBMVFC_MIG_NO_SUB_TO_CRQ 0#define IBMVFC_MIG_NO_N_TO_M 0
Signature · 1 line
2.27.0
Tyrel Datwyler
maintainerPATCH v3 17/18 ibmvfc: provide modules parameters for MQ settings
In reply to Tyrel DatwylerAdd the various module parameter toggles for adjusting the MQ characteristics at boot/load time as well as a device attribute for changing the client scsi channel request amount.
--- drivers/scsi/ibmvscsi/ibmvfc.c | 76 +++++++++++++++++++++++++++++----- 1 file changed, 66 insertions(+), 10 deletions(-)
drivers/scsi/ibmvscsi/ibmvfc.c +66 -10
@@ -40,6 +40,12 @@ static unsigned int disc_threads = IBMVFC_MAX_DISC_THREADS;static unsigned int ibmvfc_debug =IBMVFC_DEBUG ;static unsigned int log_level =IBMVFC_DEFAULT_LOG_LEVEL ;static unsigned int cls3_error =IBMVFC_CLS3_ERROR ; +static unsigned int mq_enabled =IBMVFC_MQ ; +static unsigned int nr_scsi_hw_queues =IBMVFC_SCSI_HW_QUEUES ; +static unsigned int nr_scsi_channels =IBMVFC_SCSI_CHANNELS ; +static unsigned int mig_channels_only =IBMVFC_MIG_NO_SUB_TO_CRQ ; +static unsigned int mig_no_less_channels =IBMVFC_MIG_NO_N_TO_M ; +static LIST_HEAD (ibmvfc_head);static DEFINE_SPINLOCK (ibmvfc_driver_lock);static struct scsi_transport_template *ibmvfc_transport_template;
@@ -49,6 +55,22 @@ MODULE_AUTHOR("Brian King <[email protected]>");MODULE_LICENSE ("GPL" );MODULE_VERSION (IBMVFC_DRIVER_VERSION ); +module_param_named (mq, mq_enabled, uint,S_IRUGO ); +MODULE_PARM_DESC(mq, "Enable multiqueue support. " + "[Default=" __stringify(IBMVFC_MQ) "]"); +module_param_named (scsi_host_queues, nr_scsi_hw_queues, uint,S_IRUGO ); +MODULE_PARM_DESC(scsi_host_queues, "Number of SCSI Host submission queues. " + "[Default=" __stringify(IBMVFC_SCSI_HW_QUEUES) "]"); +module_param_named (scsi_hw_channels, nr_scsi_channels, uint,S_IRUGO ); +MODULE_PARM_DESC(scsi_hw_channels, "Number of hw scsi channels to request. " + "[Default=" __stringify(IBMVFC_SCSI_CHANNELS) "]"); +module_param_named (mig_channels_only, mig_channels_only, uint,S_IRUGO ); +MODULE_PARM_DESC(mig_channels_only, "Prevent migration to non-channelized system. " + "[Default=" __stringify(IBMVFC_MIG_NO_SUB_TO_CRQ) "]"); +module_param_named (mig_no_less_channels, mig_no_less_channels, uint,S_IRUGO ); +MODULE_PARM_DESC(mig_no_less_channels, "Prevent migration to system with less channels. " + "[Default=" __stringify(IBMVFC_MIG_NO_N_TO_M) "]"); +module_param_named (init_timeout, init_timeout, uint,S_IRUGO |S_IWUSR ); MODULE_PARM_DESC(init_timeout, "Initialization timeout in seconds. " "[Default=" __stringify(IBMVFC_INIT_TIMEOUT) "]");
@@ -823,7 +845,7 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost) crq->cur =0 ;if (vhost->scsi_scrqs.scrqs) { -for (i =0 ; i <IBMVFC_SCSI_HW_QUEUES ; i++) { +for (i =0 ; i < nr_scsi_hw_queues; i++) { scrq = &vhost->scsi_scrqs.scrqs[i];memset (scrq->msgs,0 ,PAGE_SIZE ); scrq->cur =0 ;
@@ -3234,6 +3256,37 @@ static ssize_t ibmvfc_store_log_level(struct device *dev,return strlen (buf); } +static ssize_t ibmvfc_show_scsi_channels (struct device *dev, +struct device_attribute *attr,char *buf) +{ +struct Scsi_Host *shost =class_to_shost (dev); +struct ibmvfc_host *vhost =shost_priv (shost); +unsigned long flags =0 ; +int len; + +spin_lock_irqsave (shost->host_lock, flags); + len =snprintf (buf,PAGE_SIZE ,"%d\n" , vhost->client_scsi_channels); +spin_unlock_irqrestore (shost->host_lock, flags); +return len; +} + +static ssize_t ibmvfc_store_scsi_channels (struct device *dev, +struct device_attribute *attr, +const char *buf,size_t count) +{ +struct Scsi_Host *shost =class_to_shost (dev); +struct ibmvfc_host *vhost =shost_priv (shost); +unsigned long flags =0 ; +unsigned int channels; + +spin_lock_irqsave (shost->host_lock, flags); + channels =simple_strtoul (buf,NULL ,10 ); + vhost->client_scsi_channels =min (channels, nr_scsi_hw_queues); +ibmvfc_hard_reset_host (vhost); +spin_unlock_irqrestore (shost->host_lock, flags); +return strlen (buf); +} + static DEVICE_ATTR(partition_name, S_IRUGO, ibmvfc_show_host_partition_name, NULL); static DEVICE_ATTR(device_name, S_IRUGO, ibmvfc_show_host_device_name, NULL); static DEVICE_ATTR(port_loc_code, S_IRUGO, ibmvfc_show_host_loc_code, NULL);
@@ -3242,6 +3295,8 @@ static DEVICE_ATTR(npiv_version, S_IRUGO, ibmvfc_show_host_npiv_version, NULL); static DEVICE_ATTR(capabilities, S_IRUGO, ibmvfc_show_host_capabilities, NULL); static DEVICE_ATTR(log_level, S_IRUGO | S_IWUSR, ibmvfc_show_log_level, ibmvfc_store_log_level); +static DEVICE_ATTR(nr_scsi_channels, S_IRUGO | S_IWUSR, + ibmvfc_show_scsi_channels, ibmvfc_store_scsi_channels);#ifdef CONFIG_SCSI_IBMVFC_TRACE /**
@@ -3298,6 +3353,7 @@ static struct device_attribute *ibmvfc_attrs[] = { &dev_attr_npiv_version, &dev_attr_capabilities, &dev_attr_log_level, + &dev_attr_nr_scsi_channels, NULL };
@@ -4685,9 +4741,9 @@ static void ibmvfc_channel_enquiry(struct ibmvfc_host *vhost) mad->common.opcode =cpu_to_be32 (IBMVFC_CHANNEL_ENQUIRY ); mad->common.length =cpu_to_be16 (sizeof (*mad)); -if (IBMVFC_MIG_NO_SUB_TO_CRQ ) +if (mig_channels_only) mad->flags |=cpu_to_be32 (IBMVFC_NO_CHANNELS_TO_CRQ_SUPPORT ); -if (IBMVFC_MIG_NO_N_TO_M ) +if (mig_no_less_channels) mad->flags |=cpu_to_be32 (IBMVFC_NO_N_TO_M_CHANNELS_SUPPORT );ibmvfc_set_host_action (vhost,IBMVFC_HOST_ACTION_INIT_WAIT );
@@ -5426,13 +5482,13 @@ static int ibmvfc_init_sub_crqs(struct ibmvfc_host *vhost)ENTER ; - vhost->scsi_scrqs.scrqs =kcalloc (IBMVFC_SCSI_HW_QUEUES , + vhost->scsi_scrqs.scrqs =kcalloc (nr_scsi_hw_queues,sizeof (*vhost->scsi_scrqs.scrqs),GFP_KERNEL );if (!vhost->scsi_scrqs.scrqs)return -1 ; -for (i =0 ; i <IBMVFC_SCSI_HW_QUEUES ; i++) { +for (i =0 ; i < nr_scsi_hw_queues; i++) {if (ibmvfc_register_scsi_channel (vhost, i)) {for (j = i; j >0 ; j--)ibmvfc_deregister_scsi_channel (vhost, j -1 );
@@ -5456,7 +5512,7 @@ static void ibmvfc_release_sub_crqs(struct ibmvfc_host *vhost)if (!vhost->scsi_scrqs.scrqs)return ; -for (i =0 ; i <IBMVFC_SCSI_HW_QUEUES ; i++) +for (i =0 ; i < nr_scsi_hw_queues; i++)ibmvfc_deregister_scsi_channel (vhost, i);kfree (vhost->scsi_scrqs.scrqs);
@@ -5668,13 +5724,13 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id) } shost->transportt = ibmvfc_transport_template; - shost->can_queue = (max_requests /IBMVFC_SCSI_HW_QUEUES ); + shost->can_queue = (max_requests / nr_scsi_hw_queues); shost->max_lun = max_lun; shost->max_id = max_targets; shost->max_sectors =IBMVFC_MAX_SECTORS ; shost->max_cmd_len =IBMVFC_MAX_CDB_LEN ; shost->unique_id = shost->host_no; - shost->nr_hw_queues =IBMVFC_SCSI_HW_QUEUES ; + shost->nr_hw_queues = nr_scsi_hw_queues; vhost =shost_priv (shost);INIT_LIST_HEAD (&vhost->sent);
@@ -5687,8 +5743,8 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id) vhost->log_level = log_level; vhost->task_set =1 ; - vhost->mq_enabled =IBMVFC_MQ ; - vhost->client_scsi_channels =IBMVFC_SCSI_CHANNELS ; + vhost->mq_enabled = mq_enabled; + vhost->client_scsi_channels =min (nr_scsi_hw_queues, nr_scsi_channels); vhost->using_channels =0 ; vhost->do_enquiry =1 ;
Signature · 1 line
2.27.0
Re: [PATCH v3 17/18] ibmvfc: provide modules parameters for MQ settings
Signature · 3 lines
Brian King Power Linux I/O IBM Linux Technology Center
Tyrel Datwyler
maintainerPATCH v3 18/18 ibmvfc: drop host lock when completing commands in CRQ
In reply to Tyrel DatwylerThe legacy CRQ holds the host lock the even while completing commands. This presents a problem when in legacy single queue mode and nr_hw_queues is greater than one since calling scsi_done() introduces the potential for deadlock.
If nr_hw_queues is greater than one drop the hostlock in the legacy CRQ path when completing a command.
--- drivers/scsi/ibmvscsi/ibmvfc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/scsi/ibmvscsi/ibmvfc.c +7 -1
@@ -2969,6 +2969,7 @@ static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost) {long rc;struct ibmvfc_event *evt = (struct ibmvfc_event *)be64_to_cpu (crq->ioba); +unsigned long flags;switch (crq->valid) {case IBMVFC_CRQ_INIT_RSP :
@@ -3039,7 +3040,12 @@ static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost)del_timer (&evt->timer);list_del (&evt->queue);ibmvfc_trc_end (evt); - evt->done (evt); +if (nr_scsi_hw_queues >1 ) { +spin_unlock_irqrestore (vhost->host->host_lock, flags); + evt->done (evt); +spin_lock_irqsave (vhost->host->host_lock, flags); + }else + evt->done (evt); }/**
Signature · 1 line
2.27.0
Re: [PATCH v3 18/18] ibmvfc: drop host lock when completing commands in CRQ
Quoted 26 lines · Tyrel Datwyler
The legacy CRQ holds the host lock the even while completing commands. This presents a problem when in legacy single queue mode and
nr_hw_queuesis greater than one since callingscsi_done()introduces the potential for deadlock.If
nr_hw_queuesis greater than one drop the hostlock in the legacy CRQ path when completing a command.Signed-off-by Tyrel Datwyler <[email protected]>--- drivers/scsi/ibmvscsi/ibmvfc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)drivers/scsi/ibmvscsi/ibmvfc.c +1
-0@@ -2969,6 +2969,7 @@ static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost) {long rc;struct ibmvfc_event *evt = (struct ibmvfc_event *)be64_to_cpu (crq->ioba); +unsigned long flags;switch (crq->valid) {case IBMVFC_CRQ_INIT_RSP :
drivers/scsi/ibmvscsi/ibmvfc.c static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost) · line 3048
Quoted 10 lines
drivers/scsi/ibmvscsi/ibmvfc.c +6
-1@@ -3039,7 +3040,12 @@ static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost)del_timer (&evt->timer);list_del (&evt->queue);ibmvfc_trc_end (evt); - evt->done (evt); +if (nr_scsi_hw_queues >1 ) { +spin_unlock_irqrestore (vhost->host->host_lock, flags); + evt->done (evt); +spin_lock_irqsave (vhost->host->host_lock, flags); + }else + evt->done (evt);
Similar comment here as previously. The flags parameter is an output for spin_lock_irqsave but an input for spin_unlock_irqrestore. You'll need to rethink the locking here. You could just do a spin_unlock_irq / spin_lock_irq here and that would probably be OK, but probably isn't the best.
Quoted 4 lines
drivers/scsi/ibmvscsi/ibmvfc.c +0
-0}/**
Signature · 3 lines
Brian King Power Linux I/O IBM Linux Technology Center
Tyrel Datwyler
maintainerRe: [PATCH v3 18/18] ibmvfc: drop host lock when completing commands in CRQ
Quoted 34 lines · Brian King
Quoted 33 lines · Tyrel Datwyler
The legacy CRQ holds the host lock the even while completing commands. This presents a problem when in legacy single queue mode and
nr_hw_queuesis greater than one since callingscsi_done()introduces the potential for deadlock.If
nr_hw_queuesis greater than one drop the hostlock in the legacy CRQ path when completing a command.Signed-off-by Tyrel Datwyler <[email protected]>--- drivers/scsi/ibmvscsi/ibmvfc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)drivers/scsi/ibmvscsi/ibmvfc.c +4
-1@@ -2969,6 +2969,7 @@ static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost) {long rc;struct ibmvfc_event *evt = (struct ibmvfc_event *)be64_to_cpu (crq->ioba); +unsigned long flags;switch (crq->valid) {case IBMVFC_CRQ_INIT_RSP :@@ -3039,7 +3040,12 @@ static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost)del_timer (&evt->timer);list_del (&evt->queue);ibmvfc_trc_end (evt); - evt->done (evt); +if (nr_scsi_hw_queues >1 ) { +spin_unlock_irqrestore (vhost->host->host_lock, flags); + evt->done (evt);
Quoted 9 lines
drivers/scsi/ibmvscsi/ibmvfc.c static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost) · line 3048
Quoted 3 lines
drivers/scsi/ibmvscsi/ibmvfc.c +3
-0+spin_lock_irqsave (vhost->host->host_lock, flags); + }else + evt->done (evt);Similar comment here as previously. The flags parameter is an output for
spin_lock_irqsavebut an input forspin_unlock_irqrestore. You'll need to rethink the locking here. You could just do aspin_unlock_irq/spin_lock_irqhere and that would probably be OK, but probably isn't the best.
Yeah, this will also get its own lock and flags saved in the per-queue struct in the next spin.
-Tyrel
Quoted 6 lines
Quoted 4 lines
drivers/scsi/ibmvscsi/ibmvfc.c +0
-0}/**