Add libseccomp
cover Add libseccomp
This ports over the libseccomp pkg from meta-security.
Use DISTRO_FEATURE check to enable recipe Add PACKAGECONFIG tweaking for a few core pkgs if DISTRO_FEATURE (seccomp) is set for a few core pkgs.
Skipped updating "file" as I don't recall the issues file enabled with seccomp had on pseudo
Added pkg grp for adding libseccomp to base pkg grp
Add "seccomp" to DEFUALT_FEATURES as its on the same level as xattr.
I relealize some changes may be controversial and don't need to be taken.
enjoy.
Armin Kuster (6):
libseccomp: move recipe from meta-security to core
qemu: Enable seccomp if FEATURE is set
gnutls: Enable seccomp if FEATURE is set
systemd: Enable seccomp if FEATURE is set packagegroups/packagegroup-base: add seccomp grp default-distrovars.inc: Add seccomp to DISTRO_FEATURES_DEFAULT
.../distro/include/default-distrovars.inc | 2 +- .../packagegroups/packagegroup-base.bb | 6 +++ meta/recipes-core/systemd/systemd_247.6.bb | 3 +- meta/recipes-devtools/qemu/qemu_5.2.0.bb | 1 + meta/recipes-support/gnutls/gnutls_3.7.1.bb | 2 +- .../libseccomp/files/run-ptest | 4 ++ .../libseccomp/libseccomp_2.5.1.bb | 49 +++++++++++++++++++ 7 files changed, 63 insertions(+), 4 deletions(-) create mode 100644 meta/recipes-support/libseccomp/files/run-ptest create mode 100644 meta/recipes-support/libseccomp/libseccomp_2.5.1.bb
Signature · 1 line
2.25.1
PATCH 1/6 libseccomp: move recipe from meta-security to core
ptest results:
Regression Test Summary
tests run: 1404
tests skipped: 369
tests passed: 1402
tests failed: 2
tests errored: 154
Add feature_check so that the other recipes who can take advantage of this funtionality can enable it.
--- .../libseccomp/files/run-ptest | 4 ++ .../libseccomp/libseccomp_2.5.1.bb | 49 +++++++++++++++++++ 2 files changed, 53 insertions(+) create mode 100644 meta/recipes-support/libseccomp/files/run-ptest create mode 100644 meta/recipes-support/libseccomp/libseccomp_2.5.1.bb
meta/recipes-support/libseccomp/files/run-ptest new file +4 -0
@@ -0,0 +1,4 @@ +#!/bin/sh + +cd tests +./regression -a
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +49 -0
49 lines not on this page · raw message
Signature · 1 line
2.25.1
Re: [OE-core] [PATCH 1/6] libseccomp: move recipe from meta-security to core
Quoted 52 lines · Armin Kuster
ptest results:
Regression Test Summary
tests run: 1404
tests skipped: 369
tests passed: 1402
tests failed: 2
tests errored: 154Add
feature_checkso that the other recipes who can take advantage of this funtionality can enable it.Signed-off-by Armin Kuster <[email protected]>--- .../libseccomp/files/run-ptest | 4 ++ .../libseccomp/libseccomp_2.5.1.bb | 49 +++++++++++++++++++ 2 files changed, 53 insertions(+) create mode 100644 meta/recipes-support/libseccomp/files/run-ptest create mode 100644 meta/recipes-support/libseccomp/libseccomp_2.5.1.bbmeta/recipes-support/libseccomp/files/run-ptest new file +4
-0@@ -0,0 +1,4 @@ +#!/bin/sh + +cd tests +./regression -ameta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +16
-0@@ -0,0 +1,49 @@ +SUMMARY = "interface to seccomp filtering mechanism" +DESCRIPTION = "The libseccomp library provides and easy to use, platform independent,interface to the Linux Kernel's syscall filtering mechanism: seccomp." +SECTION = "security" +LICENSE = "LGPL-2.1" +LIC_FILES_CHKSUM = "file://LICENSE;beginline=0;endline=1;md5=8eac08d22113880357ceb8e7c37f989f" + +DEPENDS += "gperf-native" + +SRCREV = "4bf70431a339a2886ab8c82e9a45378f30c6e6c7" + +SRC_URI = "git://github.com/seccomp/libseccomp.git;branch=release-2.5 \ + file://run-ptest \ + " + +COMPATIBLE_HOST_riscv32 = "null" +
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb line 26
Quoted 10 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +10
-0+S = "${WORKDIR}/git" + +inherit autotools-brokensep pkgconfig ptest features_check + +REQUIRED_DISTRO_FEATURES = "seccomp" + +PACKAGECONFIG ??= "" +PACKAGECONFIG[python] = "--enable-python, --disable-python, python3" + +DISABLE_STATIC = ""
do we need apps to use some static libs ? if so which library is it, Or is it all internal?
Quoted 29 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +23
-1+ +do_compile_ptest() { + oe_runmake -C tests check-build +} + +do_install_ptest() { + install -d ${D}${PTEST_PATH}/tests + install -d ${D}${PTEST_PATH}/tools + for file in $(find tests/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tests/*.tests -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tools/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tools + done +} + +FILES_${PN} = "${bindir} ${libdir}/${BPN}.so*" +FILES_${PN}-dbg += "${libdir}/${PN}/tests/.debug/* ${libdir}/${PN}/tools/.debug" + +RDEPENDS_${PN}-ptest = "coreutils bash" --2.25.1
Re: [OE-core] [PATCH 1/6] libseccomp: move recipe from meta-security to core
Quoted 56 lines · Khem Raj
Quoted 55 lines · Armin Kuster
ptest results:
Regression Test Summary
tests run: 1404
tests skipped: 369
tests passed: 1402
tests failed: 2
tests errored: 154Add
feature_checkso that the other recipes who can take advantage of this funtionality can enable it.Signed-off-by Armin Kuster <[email protected]>--- .../libseccomp/files/run-ptest | 4 ++ .../libseccomp/libseccomp_2.5.1.bb | 49 +++++++++++++++++++ 2 files changed, 53 insertions(+) create mode 100644 meta/recipes-support/libseccomp/files/run-ptest create mode 100644 meta/recipes-support/libseccomp/libseccomp_2.5.1.bbmeta/recipes-support/libseccomp/files/run-ptest new file +4
-0@@ -0,0 +1,4 @@ +#!/bin/sh + +cd tests +./regression -ameta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +20
-0@@ -0,0 +1,49 @@ +SUMMARY = "interface to seccomp filtering mechanism" +DESCRIPTION = "The libseccomp library provides and easy to use, platform independent,interface to the Linux Kernel's syscall filtering mechanism: seccomp." +SECTION = "security" +LICENSE = "LGPL-2.1" +LIC_FILES_CHKSUM = "file://LICENSE;beginline=0;endline=1;md5=8eac08d22113880357ceb8e7c37f989f" + +DEPENDS += "gperf-native" + +SRCREV = "4bf70431a339a2886ab8c82e9a45378f30c6e6c7" + +SRC_URI = "git://github.com/seccomp/libseccomp.git;branch=release-2.5 \ + file://run-ptest \ + " + +COMPATIBLE_HOST_riscv32 = "null" + +S = "${WORKDIR}/git" + +inherit autotools-brokensep pkgconfig ptest features_check +
Quoted 8 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb line 26
Quoted 6 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +6
-0+REQUIRED_DISTRO_FEATURES = "seccomp" + +PACKAGECONFIG ??= "" +PACKAGECONFIG[python] = "--enable-python, --disable-python, python3" + +DISABLE_STATIC = ""do we need apps to use some static libs ? if so which library is it, Or is it all internal?
The commit that added that:
commit 2153c59b429293120095a2bd4562f4f7553c1ae7
Author: Stefan Agner <[email protected]>
Date: Sun Sep 1 21:48:13 2019 +0200
libseccomp: build static library always
Always build static library. This is required e.g. for runc from meta-virtualization in its default configuration.
Meta-virt is one of the reasons I am this patch set.
-armin
Quoted 30 lines
Quoted 30 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +23
-1+ +do_compile_ptest() { + oe_runmake -C tests check-build +} + +do_install_ptest() { + install -d ${D}${PTEST_PATH}/tests + install -d ${D}${PTEST_PATH}/tools + for file in $(find tests/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tests/*.tests -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tools/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tools + done +} + +FILES_${PN} = "${bindir} ${libdir}/${BPN}.so*" +FILES_${PN}-dbg += "${libdir}/${PN}/tests/.debug/* ${libdir}/${PN}/tools/.debug" + +RDEPENDS_${PN}-ptest = "coreutils bash" --2.25.1
Re: [OE-core] [PATCH 1/6] libseccomp: move recipe from meta-security to core
Quoted 81 lines · On Sat, Apr 24, 2021 at 9:55 AM akuster808 <[email protected]> wrote:
Quoted 1 line · Khem Raj
On Sat, Apr 24, 2021 at 8:56 AM Armin Kuster <[email protected]>
Quoted 19 lines · wrote:
Quoted 19 lines
ptest results:
Regression Test Summary
tests run: 1404
tests skipped: 369
tests passed: 1402
tests failed: 2
tests errored: 154Add
feature_checkso that the other recipes who can take advantage of this funtionality can enable it.Signed-off-by Armin Kuster <[email protected]>--- .../libseccomp/files/run-ptest | 4 ++ .../libseccomp/libseccomp_2.5.1.bb | 49 +++++++++++++++++++ 2 files changed, 53 insertions(+) create mode 100644 meta/recipes-support/libseccomp/files/run-ptest create mode 100644 meta/recipes-support/libseccomp/libseccomp_2.5.1.bbQuoted 1 line
Review
Quoted 1 line
(quoted diff) +0
-0b/meta/recipes-support/libseccomp/files/run-ptest
Quoted 10 lines
Review
Quoted 10 lines
new file mode 100644
index 00000000000..54b4a63cd2cmeta/recipes-support/libseccomp/files/run-ptest new file +4
-0@@ -0,0 +1,4 @@ +#!/bin/sh + +cd tests +./regression -a(quoted diff) +0
-0b/meta/recipes-support/libseccomp/libseccomp_2.5.1.bb
Quoted 7 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb line 2
Quoted 7 lines
new file mode 100644
index 00000000000..667d5da8242meta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +2
-0@@ -0,0 +1,49 @@ +SUMMARY = "interface to seccomp filtering mechanism" +DESCRIPTION = "The libseccomp library provides and easy to use,platform independent,interface to the Linux Kernel's syscall filtering
mechanism: seccomp."Quoted 3 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb
Quoted 3 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +3
-0+SECTION = "security" +LICENSE = "LGPL-2.1" +LIC_FILES_CHKSUM ="file://LICENSE;beginline=0;endline=1;md5=8eac08d22113880357ceb8e7c37f989f"
Quoted 6 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb
Quoted 6 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +6
-0+ +DEPENDS += "gperf-native" + +SRCREV = "4bf70431a339a2886ab8c82e9a45378f30c6e6c7" + +SRC_URI = "git://github.com/seccomp/libseccomp.git;branch=release-2.5\
Quoted 9 lines
Quoted 9 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +9
-0+ file://run-ptest \ + " + +COMPATIBLE_HOST_riscv32 = "null" + +S = "${WORKDIR}/git" + +inherit autotools-brokensep pkgconfig ptest features_check +Quoted 8 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb line 26
Quoted 6 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +6
-0+REQUIRED_DISTRO_FEATURES = "seccomp" + +PACKAGECONFIG ??= "" +PACKAGECONFIG[python] = "--enable-python, --disable-python, python3" + +DISABLE_STATIC = ""do we need apps to use some static libs ? if so which library is it, Or is it all internal?
The commit that added that:
commit
2153c59b429293120095a2bd4562f4f7553c1ae7Author: Stefan Agner <[email protected]> Date: Sun Sep 1 21:48:13 2019 +0200
Quoted 7 lines
libseccomp: build static library always
Always build static library. This is required e.g. for runc from meta-virtualization in its default configuration.
Meta-virt is one of the reasons I am this patch set.
Ok since it can silently link to any app perhaps turning this into a packageconfig could be a good improvement
Quoted 35 lines
-armin
Quoted 14 lines
Quoted 14 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +13
-0+ +do_compile_ptest() { + oe_runmake -C tests check-build +} + +do_install_ptest() { + install -d ${D}${PTEST_PATH}/tests + install -d ${D}${PTEST_PATH}/tools + for file in $(find tests/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tests/*.tests -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/testsQuoted 8 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb
Quoted 8 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +8
-0+ done + for file in $(find tools/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tools + done +} + +FILES_${PN} = "${bindir} ${libdir}/${BPN}.so*" +FILES_${PN}-dbg += "${libdir}/${PN}/tests/.debug/*${libdir}/${PN}/tools/.debug"
Quoted 8 lines
Quoted 8 lines
meta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +2
-1+ +RDEPENDS_${PN}-ptest = "coreutils bash" --2.25.1
Re: [OE-core] [PATCH 1/6] libseccomp: move recipe from meta-security to core
In reply to Armin Kusterriscv32 is not happy
ERROR: Nothing PROVIDES 'libseccomp' (but /home/jenkins/oe/world/yoe/sources/openembedded-core/meta/recipes-core/systemd/systemd_247.6.bb, /home/jenkins/oe/world/yoe/sources/openembedded-core/meta/recipes-support/gnutls/gnutls_3.7.1.bb DEPENDS on or otherwise requires it)
libseccomp was skipped: incompatible with host riscv32-yoe-linux (not
in COMPATIBLE_HOST)
see
http://jenkins.nas-admin.org/view/OE/job/oe_world_qemuriscv32/1123/consoleFull
Quoted 91 lines · Armin Kuster
ptest results:
Regression Test Summary
tests run: 1404
tests skipped: 369
tests passed: 1402
tests failed: 2
tests errored: 154Add
feature_checkso that the other recipes who can take advantage of this funtionality can enable it.Signed-off-by Armin Kuster <[email protected]>--- .../libseccomp/files/run-ptest | 4 ++ .../libseccomp/libseccomp_2.5.1.bb | 49 +++++++++++++++++++ 2 files changed, 53 insertions(+) create mode 100644 meta/recipes-support/libseccomp/files/run-ptest create mode 100644 meta/recipes-support/libseccomp/libseccomp_2.5.1.bbmeta/recipes-support/libseccomp/files/run-ptest new file +4
-0@@ -0,0 +1,4 @@ +#!/bin/sh + +cd tests +./regression -ameta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +49
-1@@ -0,0 +1,49 @@ +SUMMARY = "interface to seccomp filtering mechanism" +DESCRIPTION = "The libseccomp library provides and easy to use, platform independent,interface to the Linux Kernel's syscall filtering mechanism: seccomp." +SECTION = "security" +LICENSE = "LGPL-2.1" +LIC_FILES_CHKSUM = "file://LICENSE;beginline=0;endline=1;md5=8eac08d22113880357ceb8e7c37f989f" + +DEPENDS += "gperf-native" + +SRCREV = "4bf70431a339a2886ab8c82e9a45378f30c6e6c7" + +SRC_URI = "git://github.com/seccomp/libseccomp.git;branch=release-2.5 \ + file://run-ptest \ + " + +COMPATIBLE_HOST_riscv32 = "null" + +S = "${WORKDIR}/git" + +inherit autotools-brokensep pkgconfig ptest features_check + +REQUIRED_DISTRO_FEATURES = "seccomp" + +PACKAGECONFIG ??= "" +PACKAGECONFIG[python] = "--enable-python, --disable-python, python3" + +DISABLE_STATIC = "" + +do_compile_ptest() { + oe_runmake -C tests check-build +} + +do_install_ptest() { + install -d ${D}${PTEST_PATH}/tests + install -d ${D}${PTEST_PATH}/tools + for file in $(find tests/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tests/*.tests -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tools/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tools + done +} + +FILES_${PN} = "${bindir} ${libdir}/${BPN}.so*" +FILES_${PN}-dbg += "${libdir}/${PN}/tests/.debug/* ${libdir}/${PN}/tools/.debug" + +RDEPENDS_${PN}-ptest = "coreutils bash" --2.25.1
Re: [OE-core] [PATCH 1/6] libseccomp: move recipe from meta-security to core
musl/x86 apt fails
https://errors.yoctoproject.org/Errors/Details/577480/
Quoted 105 lines · Khem Raj
riscv32 is not happy
ERROR: Nothing PROVIDES 'libseccomp' (but
/home/jenkins/oe/world/yoe/sources/openembedded-core/meta/recipes-core/systemd/systemd_247.6.bb,/home/jenkins/oe/world/yoe/sources/openembedded-core/meta/recipes-support/gnutls/gnutls_3.7.1.bbDEPENDS on or otherwise requires it)
libseccomp was skipped: incompatible with host riscv32-yoe-linux (not
inCOMPATIBLE_HOST)see
http://jenkins.nas-admin.org/view/OE/job/oe_world_qemuriscv32/1123/consoleFullQuoted 91 lines · Armin Kuster
ptest results:
Regression Test Summary
tests run: 1404
tests skipped: 369
tests passed: 1402
tests failed: 2
tests errored: 154Add
feature_checkso that the other recipes who can take advantage of this funtionality can enable it.Signed-off-by Armin Kuster <[email protected]>--- .../libseccomp/files/run-ptest | 4 ++ .../libseccomp/libseccomp_2.5.1.bb | 49 +++++++++++++++++++ 2 files changed, 53 insertions(+) create mode 100644 meta/recipes-support/libseccomp/files/run-ptest create mode 100644 meta/recipes-support/libseccomp/libseccomp_2.5.1.bbmeta/recipes-support/libseccomp/files/run-ptest new file +4
-0@@ -0,0 +1,4 @@ +#!/bin/sh + +cd tests +./regression -ameta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +49
-1@@ -0,0 +1,49 @@ +SUMMARY = "interface to seccomp filtering mechanism" +DESCRIPTION = "The libseccomp library provides and easy to use, platform independent,interface to the Linux Kernel's syscall filtering mechanism: seccomp." +SECTION = "security" +LICENSE = "LGPL-2.1" +LIC_FILES_CHKSUM = "file://LICENSE;beginline=0;endline=1;md5=8eac08d22113880357ceb8e7c37f989f" + +DEPENDS += "gperf-native" + +SRCREV = "4bf70431a339a2886ab8c82e9a45378f30c6e6c7" + +SRC_URI = "git://github.com/seccomp/libseccomp.git;branch=release-2.5 \ + file://run-ptest \ + " + +COMPATIBLE_HOST_riscv32 = "null" + +S = "${WORKDIR}/git" + +inherit autotools-brokensep pkgconfig ptest features_check + +REQUIRED_DISTRO_FEATURES = "seccomp" + +PACKAGECONFIG ??= "" +PACKAGECONFIG[python] = "--enable-python, --disable-python, python3" + +DISABLE_STATIC = "" + +do_compile_ptest() { + oe_runmake -C tests check-build +} + +do_install_ptest() { + install -d ${D}${PTEST_PATH}/tests + install -d ${D}${PTEST_PATH}/tools + for file in $(find tests/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tests/*.tests -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tools/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tools + done +} + +FILES_${PN} = "${bindir} ${libdir}/${BPN}.so*" +FILES_${PN}-dbg += "${libdir}/${PN}/tests/.debug/* ${libdir}/${PN}/tools/.debug" + +RDEPENDS_${PN}-ptest = "coreutils bash" --2.25.1
Re: [OE-core] [PATCH 1/6] libseccomp: move recipe from meta-security to core
Quoted 1 line · Khem Raj
musl/x86 apt fails
Right. RP told me yesterday. I have been looking into it.
I say your patch. thanks.
-armin
Quoted 107 lines
https://errors.yoctoproject.org/Errors/Details/577480/
Quoted 103 lines · Khem Raj
riscv32 is not happy
ERROR: Nothing PROVIDES 'libseccomp' (but
/home/jenkins/oe/world/yoe/sources/openembedded-core/meta/recipes-core/systemd/systemd_247.6.bb,/home/jenkins/oe/world/yoe/sources/openembedded-core/meta/recipes-support/gnutls/gnutls_3.7.1.bbDEPENDS on or otherwise requires it)
libseccomp was skipped: incompatible with host riscv32-yoe-linux (not
inCOMPATIBLE_HOST)see
http://jenkins.nas-admin.org/view/OE/job/oe_world_qemuriscv32/1123/consoleFullQuoted 90 lines · Armin Kuster
ptest results:
Regression Test Summary
tests run: 1404
tests skipped: 369
tests passed: 1402
tests failed: 2
tests errored: 154Add
feature_checkso that the other recipes who can take advantage of this funtionality can enable it.Signed-off-by Armin Kuster <[email protected]>--- .../libseccomp/files/run-ptest | 4 ++ .../libseccomp/libseccomp_2.5.1.bb | 49 +++++++++++++++++++ 2 files changed, 53 insertions(+) create mode 100644 meta/recipes-support/libseccomp/files/run-ptest create mode 100644 meta/recipes-support/libseccomp/libseccomp_2.5.1.bbmeta/recipes-support/libseccomp/files/run-ptest new file +4
-0@@ -0,0 +1,4 @@ +#!/bin/sh + +cd tests +./regression -ameta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +49
-1@@ -0,0 +1,49 @@ +SUMMARY = "interface to seccomp filtering mechanism" +DESCRIPTION = "The libseccomp library provides and easy to use, platform independent,interface to the Linux Kernel's syscall filtering mechanism: seccomp." +SECTION = "security" +LICENSE = "LGPL-2.1" +LIC_FILES_CHKSUM = "file://LICENSE;beginline=0;endline=1;md5=8eac08d22113880357ceb8e7c37f989f" + +DEPENDS += "gperf-native" + +SRCREV = "4bf70431a339a2886ab8c82e9a45378f30c6e6c7" + +SRC_URI = "git://github.com/seccomp/libseccomp.git;branch=release-2.5 \ + file://run-ptest \ + " + +COMPATIBLE_HOST_riscv32 = "null" + +S = "${WORKDIR}/git" + +inherit autotools-brokensep pkgconfig ptest features_check + +REQUIRED_DISTRO_FEATURES = "seccomp" + +PACKAGECONFIG ??= "" +PACKAGECONFIG[python] = "--enable-python, --disable-python, python3" + +DISABLE_STATIC = "" + +do_compile_ptest() { + oe_runmake -C tests check-build +} + +do_install_ptest() { + install -d ${D}${PTEST_PATH}/tests + install -d ${D}${PTEST_PATH}/tools + for file in $(find tests/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tests/*.tests -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tools/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tools + done +} + +FILES_${PN} = "${bindir} ${libdir}/${BPN}.so*" +FILES_${PN}-dbg += "${libdir}/${PN}/tests/.debug/* ${libdir}/${PN}/tools/.debug" + +RDEPENDS_${PN}-ptest = "coreutils bash" --2.25.1
Re: [OE-core] [PATCH 1/6] libseccomp: move recipe from meta-security to core
In reply to Khem RajQuoted 1 line · Khem Raj
riscv32 is not happy
that is not supported by libseccomp per their supported arch list. I came across that yesterday.
Quoted 7 lines
ERROR: Nothing PROVIDES 'libseccomp' (but
/home/jenkins/oe/world/yoe/sources/openembedded-core/meta/recipes-core/systemd/systemd_247.6.bb,/home/jenkins/oe/world/yoe/sources/openembedded-core/meta/recipes-support/gnutls/gnutls_3.7.1.bbDEPENDS on or otherwise requires it)
libseccomp was skipped: incompatible with host riscv32-yoe-linux (not
inCOMPATIBLE_HOST)
I suspect we need to exclude the arch for now. I didn't notice any patch to add that yet.
-armin
Quoted 95 lines
see
http://jenkins.nas-admin.org/view/OE/job/oe_world_qemuriscv32/1123/consoleFullQuoted 90 lines · Armin Kuster
ptest results:
Regression Test Summary
tests run: 1404
tests skipped: 369
tests passed: 1402
tests failed: 2
tests errored: 154Add
feature_checkso that the other recipes who can take advantage of this funtionality can enable it.Signed-off-by Armin Kuster <[email protected]>--- .../libseccomp/files/run-ptest | 4 ++ .../libseccomp/libseccomp_2.5.1.bb | 49 +++++++++++++++++++ 2 files changed, 53 insertions(+) create mode 100644 meta/recipes-support/libseccomp/files/run-ptest create mode 100644 meta/recipes-support/libseccomp/libseccomp_2.5.1.bbmeta/recipes-support/libseccomp/files/run-ptest new file +4
-0@@ -0,0 +1,4 @@ +#!/bin/sh + +cd tests +./regression -ameta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +49
-1@@ -0,0 +1,49 @@ +SUMMARY = "interface to seccomp filtering mechanism" +DESCRIPTION = "The libseccomp library provides and easy to use, platform independent,interface to the Linux Kernel's syscall filtering mechanism: seccomp." +SECTION = "security" +LICENSE = "LGPL-2.1" +LIC_FILES_CHKSUM = "file://LICENSE;beginline=0;endline=1;md5=8eac08d22113880357ceb8e7c37f989f" + +DEPENDS += "gperf-native" + +SRCREV = "4bf70431a339a2886ab8c82e9a45378f30c6e6c7" + +SRC_URI = "git://github.com/seccomp/libseccomp.git;branch=release-2.5 \ + file://run-ptest \ + " + +COMPATIBLE_HOST_riscv32 = "null" + +S = "${WORKDIR}/git" + +inherit autotools-brokensep pkgconfig ptest features_check + +REQUIRED_DISTRO_FEATURES = "seccomp" + +PACKAGECONFIG ??= "" +PACKAGECONFIG[python] = "--enable-python, --disable-python, python3" + +DISABLE_STATIC = "" + +do_compile_ptest() { + oe_runmake -C tests check-build +} + +do_install_ptest() { + install -d ${D}${PTEST_PATH}/tests + install -d ${D}${PTEST_PATH}/tools + for file in $(find tests/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tests/*.tests -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tools/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tools + done +} + +FILES_${PN} = "${bindir} ${libdir}/${BPN}.so*" +FILES_${PN}-dbg += "${libdir}/${PN}/tests/.debug/* ${libdir}/${PN}/tools/.debug" + +RDEPENDS_${PN}-ptest = "coreutils bash" --2.25.1
Re: [OE-core] [PATCH 1/6] libseccomp: move recipe from meta-security to core
Quoted 8 lines · On Sun, Apr 25, 2021 at 11:26 AM akuster808 <[email protected]> wrote:
Quoted 1 line · Khem Raj
riscv32 is not happy
that is not supported by libseccomp per their supported arch list. I came across that yesterday.
I think the problem is when we enable it by default in DISTRO_FEATURES perhaps we should add an explicit
DISTRO_FEATURES_remove_riscv32 = "seccomp"
in default-distrovars.inc
Quoted 108 lines
Quoted 7 lines
ERROR: Nothing PROVIDES 'libseccomp' (but
/home/jenkins/oe/world/yoe/sources/openembedded-core/meta/recipes-core/systemd/systemd_247.6.bb,/home/jenkins/oe/world/yoe/sources/openembedded-core/meta/recipes-support/gnutls/gnutls_3.7.1.bbDEPENDS on or otherwise requires it)
libseccomp was skipped: incompatible with host riscv32-yoe-linux (not
inCOMPATIBLE_HOST)I suspect we need to exclude the arch for now. I didn't notice any patch to add that yet.
-armin
Quoted 95 lines
see
http://jenkins.nas-admin.org/view/OE/job/oe_world_qemuriscv32/1123/consoleFullQuoted 90 lines · Armin Kuster
ptest results:
Regression Test Summary
tests run: 1404
tests skipped: 369
tests passed: 1402
tests failed: 2
tests errored: 154Add
feature_checkso that the other recipes who can take advantage of this funtionality can enable it.Signed-off-by Armin Kuster <[email protected]>--- .../libseccomp/files/run-ptest | 4 ++ .../libseccomp/libseccomp_2.5.1.bb | 49 +++++++++++++++++++ 2 files changed, 53 insertions(+) create mode 100644 meta/recipes-support/libseccomp/files/run-ptest create mode 100644 meta/recipes-support/libseccomp/libseccomp_2.5.1.bbmeta/recipes-support/libseccomp/files/run-ptest new file +4
-0@@ -0,0 +1,4 @@ +#!/bin/sh + +cd tests +./regression -ameta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +49
-1@@ -0,0 +1,49 @@ +SUMMARY = "interface to seccomp filtering mechanism" +DESCRIPTION = "The libseccomp library provides and easy to use, platform independent,interface to the Linux Kernel's syscall filtering mechanism: seccomp." +SECTION = "security" +LICENSE = "LGPL-2.1" +LIC_FILES_CHKSUM = "file://LICENSE;beginline=0;endline=1;md5=8eac08d22113880357ceb8e7c37f989f" + +DEPENDS += "gperf-native" + +SRCREV = "4bf70431a339a2886ab8c82e9a45378f30c6e6c7" + +SRC_URI = "git://github.com/seccomp/libseccomp.git;branch=release-2.5 \ + file://run-ptest \ + " + +COMPATIBLE_HOST_riscv32 = "null" + +S = "${WORKDIR}/git" + +inherit autotools-brokensep pkgconfig ptest features_check + +REQUIRED_DISTRO_FEATURES = "seccomp" + +PACKAGECONFIG ??= "" +PACKAGECONFIG[python] = "--enable-python, --disable-python, python3" + +DISABLE_STATIC = "" + +do_compile_ptest() { + oe_runmake -C tests check-build +} + +do_install_ptest() { + install -d ${D}${PTEST_PATH}/tests + install -d ${D}${PTEST_PATH}/tools + for file in $(find tests/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tests/*.tests -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tools/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tools + done +} + +FILES_${PN} = "${bindir} ${libdir}/${BPN}.so*" +FILES_${PN}-dbg += "${libdir}/${PN}/tests/.debug/* ${libdir}/${PN}/tools/.debug" + +RDEPENDS_${PN}-ptest = "coreutils bash" --2.25.1
Re: [OE-core] [PATCH 1/6] libseccomp: move recipe from meta-security to core
Quoted 5 lines · Khem Raj
Quoted 4 lines · On Sun, Apr 25, 2021 at 11:26 AM akuster808 <[email protected]> wrote:
Quoted 1 line · Khem Raj
riscv32 is not happy
Quoted 8 lines
Quoted 2 lines
that is not supported by libseccomp per their supported arch list. I came across that yesterday.
I think the problem is when we enable it by default in
DISTRO_FEATURESperhaps we should add an explicit
DISTRO_FEATURES_remove_riscv32= "seccomp"in default-distrovars.inc
sounds good. libseccomp hit master this morning.
-armin
Quoted 106 lines
Quoted 106 lines
Quoted 7 lines
ERROR: Nothing PROVIDES 'libseccomp' (but
/home/jenkins/oe/world/yoe/sources/openembedded-core/meta/recipes-core/systemd/systemd_247.6.bb,/home/jenkins/oe/world/yoe/sources/openembedded-core/meta/recipes-support/gnutls/gnutls_3.7.1.bbDEPENDS on or otherwise requires it)
libseccomp was skipped: incompatible with host riscv32-yoe-linux (not
inCOMPATIBLE_HOST)I suspect we need to exclude the arch for now. I didn't notice any patch to add that yet.
-armin
Quoted 94 lines
see
http://jenkins.nas-admin.org/view/OE/job/oe_world_qemuriscv32/1123/consoleFullQuoted 90 lines · Armin Kuster
ptest results:
Regression Test Summary
tests run: 1404
tests skipped: 369
tests passed: 1402
tests failed: 2
tests errored: 154Add
feature_checkso that the other recipes who can take advantage of this funtionality can enable it.Signed-off-by Armin Kuster <[email protected]>--- .../libseccomp/files/run-ptest | 4 ++ .../libseccomp/libseccomp_2.5.1.bb | 49 +++++++++++++++++++ 2 files changed, 53 insertions(+) create mode 100644 meta/recipes-support/libseccomp/files/run-ptest create mode 100644 meta/recipes-support/libseccomp/libseccomp_2.5.1.bbmeta/recipes-support/libseccomp/files/run-ptest new file +4
-0@@ -0,0 +1,4 @@ +#!/bin/sh + +cd tests +./regression -ameta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +49
-1@@ -0,0 +1,49 @@ +SUMMARY = "interface to seccomp filtering mechanism" +DESCRIPTION = "The libseccomp library provides and easy to use, platform independent,interface to the Linux Kernel's syscall filtering mechanism: seccomp." +SECTION = "security" +LICENSE = "LGPL-2.1" +LIC_FILES_CHKSUM = "file://LICENSE;beginline=0;endline=1;md5=8eac08d22113880357ceb8e7c37f989f" + +DEPENDS += "gperf-native" + +SRCREV = "4bf70431a339a2886ab8c82e9a45378f30c6e6c7" + +SRC_URI = "git://github.com/seccomp/libseccomp.git;branch=release-2.5 \ + file://run-ptest \ + " + +COMPATIBLE_HOST_riscv32 = "null" + +S = "${WORKDIR}/git" + +inherit autotools-brokensep pkgconfig ptest features_check + +REQUIRED_DISTRO_FEATURES = "seccomp" + +PACKAGECONFIG ??= "" +PACKAGECONFIG[python] = "--enable-python, --disable-python, python3" + +DISABLE_STATIC = "" + +do_compile_ptest() { + oe_runmake -C tests check-build +} + +do_install_ptest() { + install -d ${D}${PTEST_PATH}/tests + install -d ${D}${PTEST_PATH}/tools + for file in $(find tests/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tests/*.tests -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tools/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tools + done +} + +FILES_${PN} = "${bindir} ${libdir}/${BPN}.so*" +FILES_${PN}-dbg += "${libdir}/${PN}/tests/.debug/* ${libdir}/${PN}/tools/.debug" + +RDEPENDS_${PN}-ptest = "coreutils bash" --2.25.1
PATCH 2/6 qemu: Enable seccomp if FEATURE is set
In reply to Armin Kuster--- meta/recipes-devtools/qemu/qemu_5.2.0.bb | 1 + 1 file changed, 1 insertion(+)
meta/recipes-devtools/qemu/qemu_5.2.0.bb +1 -0
@@ -22,6 +22,7 @@ PACKAGECONFIG ??= " \ fdt sdl kvm \ ${@bb.utils.filter('DISTRO_FEATURES', 'alsa xen', d)} \ ${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'virglrenderer glx', '', d)} \ + ${@bb.utils.filter('DISTRO_FEATURES', 'seccomp', d)} \ " PACKAGECONFIG_class-nativesdk ??= "fdt sdl kvm \ ${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'virglrenderer glx', '', d)} \
Signature · 1 line
2.25.1
PATCH 3/6 gnutls: Enable seccomp if FEATURE is set
In reply to Armin Kuster--- meta/recipes-support/gnutls/gnutls_3.7.1.bb | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
meta/recipes-support/gnutls/gnutls_3.7.1.bb +1 -1
@@ -27,7 +27,7 @@ SRC_URI[sha256sum] = "3777d7963eca5e06eb315686163b7b3f5045e2baac5e54e038ace9835e inherit autotools texinfo pkgconfig gettext lib_package gtk-doc -PACKAGECONFIG ??= "libidn" +PACKAGECONFIG ??= "libidn ${@bb.utils.filter('DISTRO_FEATURES', 'seccomp', d)}" # You must also have CONFIG_SECCOMP enabled in the kernel for # seccomp to work.
Signature · 1 line
2.25.1
PATCH 4/6 systemd: Enable seccomp if FEATURE is set
In reply to Armin Kuster--- meta/recipes-core/systemd/systemd_247.6.bb | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
meta/recipes-core/systemd/systemd_247.6.bb +1 -2
@@ -65,7 +65,7 @@ PAM_PLUGINS = " \ " PACKAGECONFIG ??= " \ - ${@bb.utils.filter('DISTRO_FEATURES', 'acl audit efi ldconfig pam selinux smack usrmerge polkit', d)} \ + ${@bb.utils.filter('DISTRO_FEATURES', 'acl audit efi ldconfig pam selinux smack usrmerge polkit seccomp', d)} \ ${@bb.utils.contains('DISTRO_FEATURES', 'wifi', 'rfkill', '', d)} \ ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'xkbcommon', '', d)} \ backlight \
@@ -177,7 +177,6 @@ PACKAGECONFIG[quotacheck] = "-Dquotacheck=true,-Dquotacheck=false" PACKAGECONFIG[randomseed] = "-Drandomseed=true,-Drandomseed=false" PACKAGECONFIG[resolved] = "-Dresolve=true,-Dresolve=false" PACKAGECONFIG[rfkill] = "-Drfkill=true,-Drfkill=false" -# libseccomp is found in meta-security PACKAGECONFIG[seccomp] = "-Dseccomp=true,-Dseccomp=false,libseccomp" PACKAGECONFIG[selinux] = "-Dselinux=true,-Dselinux=false,libselinux,initscripts-sushell" PACKAGECONFIG[smack] = "-Dsmack=true,-Dsmack=false"
Signature · 1 line
2.25.1
Re: [OE-core] [PATCH 4/6] systemd: Enable seccomp if FEATURE is set
Hi,
Patch itself is ok, but I'll just comment that I've seen some boot time regressions coming from systemd seccomp support. On NXP iMX8 and dunfell, systemd needed a few 100 ms more time in early boot if seccomp was enabled. I could not figure out where this was lost though. Could be just kernel or BSP SW configuration problem that we had. Ideas what could be causing this would be nice to hear...
Cheers,
-Mikko
PATCH 5/6 packagegroups/packagegroup-base: add seccomp grp
In reply to Armin KusterThis allows for inclusion of the package when
the FEATURE is set
--- meta/recipes-core/packagegroups/packagegroup-base.bb | 6 ++++++ 1 file changed, 6 insertions(+)
meta/recipes-core/packagegroups/packagegroup-base.bb +6 -0
@@ -38,6 +38,7 @@ PACKAGES = ' \ ${@bb.utils.contains("DISTRO_FEATURES", "ppp", "packagegroup-base-ppp", "", d)} \ ${@bb.utils.contains("DISTRO_FEATURES", "smbfs", "packagegroup-base-smbfs", "", d)} \ ${@bb.utils.contains("DISTRO_FEATURES", "zeroconf", "packagegroup-base-zeroconf", "", d)} \ + ${@bb.utils.contains("DISTRO_FEATURES", "seccomp", "packagegroup-base-seccomp", "", d)} \ \ '
@@ -76,6 +77,7 @@ RDEPENDS_packagegroup-base = "\ ${@bb.utils.contains('DISTRO_FEATURES', 'ipsec', 'packagegroup-base-ipsec', '',d)} \ ${@bb.utils.contains('DISTRO_FEATURES', 'ppp', 'packagegroup-base-ppp', '',d)} \ ${@bb.utils.contains('DISTRO_FEATURES', 'zeroconf', 'packagegroup-base-zeroconf', '',d)} \ + ${@bb.utils.contains("DISTRO_FEATURES", "seccomp", "packagegroup-base-seccomp", "", d)} \ "
@@ -343,3 +345,7 @@ RDEPENDS_packagegroup-base-serial = "\ SUMMARY_packagegroup-base-phone = "Cellular telephony (voice) support" RDEPENDS_packagegroup-base-phone = "\ ofono" + +SUMMARY_packagegroup-base-seccomp = "Seccomp support" +RDEPENDS_packagegroup-base-seccomp = "\ + libseccomp"
Signature · 1 line
2.25.1
Re: [OE-core] [PATCH 5/6] packagegroups/packagegroup-base: add seccomp grp
Quoted 4 lines · Armin Kuster
This allows for inclusion of the package when
the FEATURE is set
isn't liibseccomp a library which would be automatically included if a package needs it ?
in that case we may avoid this packagegrooup
Quoted 39 lines
Signed-off-by Armin Kuster <[email protected]>--- meta/recipes-core/packagegroups/packagegroup-base.bb | 6 ++++++ 1 file changed, 6 insertions(+)meta/recipes-core/packagegroups/packagegroup-base.bb +6
-1@@ -38,6 +38,7 @@ PACKAGES = ' \ ${@bb.utils.contains("DISTRO_FEATURES", "ppp", "packagegroup-base-ppp", "", d)} \ ${@bb.utils.contains("DISTRO_FEATURES", "smbfs", "packagegroup-base-smbfs", "", d)} \ ${@bb.utils.contains("DISTRO_FEATURES", "zeroconf", "packagegroup-base-zeroconf", "", d)} \ + ${@bb.utils.contains("DISTRO_FEATURES", "seccomp", "packagegroup-base-seccomp", "", d)} \ \ '@@ -76,6 +77,7 @@ RDEPENDS_packagegroup-base = "\ ${@bb.utils.contains('DISTRO_FEATURES', 'ipsec', 'packagegroup-base-ipsec', '',d)} \ ${@bb.utils.contains('DISTRO_FEATURES', 'ppp', 'packagegroup-base-ppp', '',d)} \ ${@bb.utils.contains('DISTRO_FEATURES', 'zeroconf', 'packagegroup-base-zeroconf', '',d)} \ + ${@bb.utils.contains("DISTRO_FEATURES", "seccomp", "packagegroup-base-seccomp", "", d)} \ "@@ -343,3 +345,7 @@ RDEPENDS_packagegroup-base-serial = "\ SUMMARY_packagegroup-base-phone = "Cellular telephony (voice) support" RDEPENDS_packagegroup-base-phone = "\ ofono" + +SUMMARY_packagegroup-base-seccomp = "Seccomp support" +RDEPENDS_packagegroup-base-seccomp = "\ + libseccomp" --2.25.1
Re: [OE-core] [PATCH 5/6] packagegroups/packagegroup-base: add seccomp grp
Quoted 7 lines · Khem Raj
Quoted 3 lines · Armin Kuster
This allows for inclusion of the package when
the FEATURE is setisn't liibseccomp a library which would be automatically included if a package needs it ?
in that case we may avoid this packagegrooup
Err, you are right..
thanks,
Armin
Quoted 39 lines
Quoted 39 lines
Signed-off-by Armin Kuster <[email protected]>--- meta/recipes-core/packagegroups/packagegroup-base.bb | 6 ++++++ 1 file changed, 6 insertions(+)meta/recipes-core/packagegroups/packagegroup-base.bb +6
-1@@ -38,6 +38,7 @@ PACKAGES = ' \ ${@bb.utils.contains("DISTRO_FEATURES", "ppp", "packagegroup-base-ppp", "", d)} \ ${@bb.utils.contains("DISTRO_FEATURES", "smbfs", "packagegroup-base-smbfs", "", d)} \ ${@bb.utils.contains("DISTRO_FEATURES", "zeroconf", "packagegroup-base-zeroconf", "", d)} \ + ${@bb.utils.contains("DISTRO_FEATURES", "seccomp", "packagegroup-base-seccomp", "", d)} \ \ '@@ -76,6 +77,7 @@ RDEPENDS_packagegroup-base = "\ ${@bb.utils.contains('DISTRO_FEATURES', 'ipsec', 'packagegroup-base-ipsec', '',d)} \ ${@bb.utils.contains('DISTRO_FEATURES', 'ppp', 'packagegroup-base-ppp', '',d)} \ ${@bb.utils.contains('DISTRO_FEATURES', 'zeroconf', 'packagegroup-base-zeroconf', '',d)} \ + ${@bb.utils.contains("DISTRO_FEATURES", "seccomp", "packagegroup-base-seccomp", "", d)} \ "@@ -343,3 +345,7 @@ RDEPENDS_packagegroup-base-serial = "\ SUMMARY_packagegroup-base-phone = "Cellular telephony (voice) support" RDEPENDS_packagegroup-base-phone = "\ ofono" + +SUMMARY_packagegroup-base-seccomp = "Seccomp support" +RDEPENDS_packagegroup-base-seccomp = "\ + libseccomp" --2.25.1
PATCH 6/6 default-distrovars.inc: Add seccomp to DISTRO_FEATURES_DEFAULT
In reply to Armin KusterSince xattr is included, seccomp should be too
--- meta/conf/distro/include/default-distrovars.inc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
meta/conf/distro/include/default-distrovars.inc +1 -1
@@ -10,7 +10,7 @@ LOCALE_UTF8_ONLY ?= "0" LOCALE_UTF8_IS_DEFAULT ?= "1" LOCALE_UTF8_IS_DEFAULT_class-nativesdk = "0" -DISTRO_FEATURES_DEFAULT ?= "acl alsa argp bluetooth debuginfod ext2 ipv4 ipv6 largefile pcmcia usbgadget usbhost wifi xattr nfs zeroconf pci 3g nfc x11 vfat" +DISTRO_FEATURES_DEFAULT ?= "acl alsa argp bluetooth debuginfod ext2 ipv4 ipv6 largefile pcmcia usbgadget usbhost wifi xattr nfs zeroconf pci 3g nfc x11 vfat seccomp" DISTRO_FEATURES ?= "${DISTRO_FEATURES_DEFAULT}" IMAGE_FEATURES ?= ""
Signature · 1 line
2.25.1
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [OE-core] [PATCH 1/6] libseccomp: move recipe from meta-security to core
Quoted 7 lines · Armin Kuster via lists.openembedded.org
ptest results:
Regression Test Summary
tests run: 1404
tests skipped: 369
tests passed: 1402
tests failed: 2
tests errored: 154
Ptest on x86 musl with the patches in master-next many thanks to Richard and Khem for their fixes.
Regression Test Summary
tests run: 8150
tests skipped: 114
tests passed: 8148
tests failed: 2
tests errored: 0
Many of the skipped are do to missing valgrind or wrong arch.
-armin
Quoted 80 lines
Add
feature_checkso that the other recipes who can take advantage of this funtionality can enable it.Signed-off-by Armin Kuster <[email protected]>--- .../libseccomp/files/run-ptest | 4 ++ .../libseccomp/libseccomp_2.5.1.bb | 49 +++++++++++++++++++ 2 files changed, 53 insertions(+) create mode 100644 meta/recipes-support/libseccomp/files/run-ptest create mode 100644 meta/recipes-support/libseccomp/libseccomp_2.5.1.bbmeta/recipes-support/libseccomp/files/run-ptest new file +4
-0@@ -0,0 +1,4 @@ +#!/bin/sh + +cd tests +./regression -ameta/recipes-support/libseccomp/libseccomp_2.5.1.bb new file +49
-0@@ -0,0 +1,49 @@ +SUMMARY = "interface to seccomp filtering mechanism" +DESCRIPTION = "The libseccomp library provides and easy to use, platform independent,interface to the Linux Kernel's syscall filtering mechanism: seccomp." +SECTION = "security" +LICENSE = "LGPL-2.1" +LIC_FILES_CHKSUM = "file://LICENSE;beginline=0;endline=1;md5=8eac08d22113880357ceb8e7c37f989f" + +DEPENDS += "gperf-native" + +SRCREV = "4bf70431a339a2886ab8c82e9a45378f30c6e6c7" + +SRC_URI = "git://github.com/seccomp/libseccomp.git;branch=release-2.5 \ + file://run-ptest \ + " + +COMPATIBLE_HOST_riscv32 = "null" + +S = "${WORKDIR}/git" + +inherit autotools-brokensep pkgconfig ptest features_check + +REQUIRED_DISTRO_FEATURES = "seccomp" + +PACKAGECONFIG ??= "" +PACKAGECONFIG[python] = "--enable-python, --disable-python, python3" + +DISABLE_STATIC = "" + +do_compile_ptest() { + oe_runmake -C tests check-build +} + +do_install_ptest() { + install -d ${D}${PTEST_PATH}/tests + install -d ${D}${PTEST_PATH}/tools + for file in $(find tests/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tests/*.tests -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tests + done + for file in $(find tools/* -executable -type f); do + install -m 744 ${S}/${file} ${D}/${PTEST_PATH}/tools + done +} + +FILES_${PN} = "${bindir} ${libdir}/${BPN}.so*" +FILES_${PN}-dbg += "${libdir}/${PN}/tests/.debug/* ${libdir}/${PN}/tools/.debug" + +RDEPENDS_${PN}-ptest = "coreutils bash"