add TCB driver for sama5d2
Subsystems (2)
cover add TCB driver for sama5d2
When booting under OP-TEE, the SYSC is secured which means the PIT is also not accessible by non-secure world. The TCB 0 however is always available for non-secure world and thus can be used.
This series add a TCB driver and enables it in sama5d2 configs.
Clément Léger (3):
timer: atmel_tcb_timer: add atmel_tcb driver
dts: sama5d2: add TCB node
configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER
MAINTAINERS | 1 + arch/arm/dts/sama5d2.dtsi | 6 + configs/sama5d2_icp_mmc_defconfig | 1 + configs/sama5d2_ptc_ek_mmc_defconfig | 1 + configs/sama5d2_ptc_ek_nandflash_defconfig | 1 + configs/sama5d2_xplained_emmc_defconfig | 1 + configs/sama5d2_xplained_mmc_defconfig | 1 + configs/sama5d2_xplained_qspiflash_defconfig | 1 + configs/sama5d2_xplained_spiflash_defconfig | 1 + drivers/timer/Kconfig | 7 + drivers/timer/Makefile | 1 + drivers/timer/atmel_tcb_timer.c | 152 +++++++++++++++++++ 12 files changed, 174 insertions(+) create mode 100644 drivers/timer/atmel_tcb_timer.c
Signature · 1 line
2.34.1
PATCH 1/3 timer: atmel_tcb_timer: add atmel_tcb driver
Add a driver for the timer counter block that can be found on sama5d2. This driver will be used when booting under OP-TEE since the pit timer which is part of the SYSC is secured. Channel 1 & 2 are configured to be chained together which allows to have a 64bits counter.
--- MAINTAINERS | 1 + drivers/timer/Kconfig | 7 ++ drivers/timer/Makefile | 1 + drivers/timer/atmel_tcb_timer.c | 152 ++++++++++++++++++++++++++++++++ 4 files changed, 161 insertions(+) create mode 100644 drivers/timer/atmel_tcb_timer.c
MAINTAINERS +1 -0
@@ -343,6 +343,7 @@ F: arch/arm/mach-at91/ F: board/atmel/ F: drivers/cpu/at91_cpu.c F: drivers/misc/microchip_flexcom.c +F: drivers/timer/atmel_tcb_timer.c F: include/dt-bindings/mfd/atmel-flexcom.h F: drivers/timer/mchp-pit64b-timer.c
drivers/timer/Kconfig +7 -0
@@ -96,6 +96,13 @@ config ATMEL_PIT_TIMER it is designed to offer maximum accuracy and efficient management, even for systems with long response time. +config ATMEL_TCB_TIMER + bool "Atmel timer counter support" + depends on TIMER + help + Select this to enable the use of the timer counter as a monotonic + counter. + config CADENCE_TTC_TIMER bool "Cadence TTC (Triple Timer Counter)" depends on TIMER
drivers/timer/Makefile +1 -0
@@ -10,6 +10,7 @@ obj-$(CONFIG_ARC_TIMER) += arc_timer.o obj-$(CONFIG_AST_TIMER) += ast_timer.o obj-$(CONFIG_ATCPIT100_TIMER) += atcpit100_timer.o obj-$(CONFIG_ATMEL_PIT_TIMER) += atmel_pit_timer.o +obj-$(CONFIG_ATMEL_TCB_TIMER) += atmel_tcb_timer.o obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence-ttc.o obj-$(CONFIG_DESIGNWARE_APB_TIMER) += dw-apb-timer.o obj-$(CONFIG_MPC83XX_TIMER) += mpc83xx_timer.o
drivers/timer/atmel_tcb_timer.c new file +152 -0
152 lines not on this page · raw message
Signature · 1 line
2.34.1
PATCH 2/3 dts: sama5d2: add TCB node
In reply to Clément LégerAdd the device-tree node to describe the TCB timer.
--- arch/arm/dts/sama5d2.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm/dts/sama5d2.dtsi +6 -0
@@ -700,6 +700,12 @@ clocks = <&h32ck>; }; + tcb0: timer@f800c000 { + compatible = "atmel,sama5d2-tcb"; + reg = <0xf800c000 0x100>; + clocks = <&tcb0_gclk>; + }; + watchdog@f8048040 { compatible = "atmel,sama5d4-wdt"; reg = <0xf8048040 0x10>;
Signature · 1 line
2.34.1
Re: [PATCH 2/3] dts: sama5d2: add TCB node
On 2/2/22 11:46 AM, Clément Léger wrote:
Hello Clement,
Thank you for the patch.
Quoted 12 lines
Add the device-tree node to describe the TCB timer.
Signed-off-by Clément Léger <[email protected]>--- arch/arm/dts/sama5d2.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)arch/arm/dts/sama5d2.dtsi +0
-0
arch/arm/dts/sama5d2.dtsi line 706
Quoted 7 lines
arch/arm/dts/sama5d2.dtsi +4
-0@@ -700,6 +700,12 @@ clocks = <&h32ck>; }; + tcb0: timer@f800c000 { + compatible = "atmel,sama5d2-tcb"; + reg = <0xf800c000 0x100>; + clocks = <&tcb0_gclk>;
This node needs to have exactly 3 clocks, according to this documentation here in Linux:
Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
Also the list of required properties contain multiple entries compared to your node.
We need to have this node exactly as the one in Linux DT.
Eugen
Quoted 8 lines
arch/arm/dts/sama5d2.dtsi +2
-1+ }; + watchdog@f8048040 { compatible = "atmel,sama5d4-wdt"; reg = <0xf8048040 0x10>; --2.34.1
PATCH 3/3 configs: sama5d2: enable option CONFIG_ATMEL_TCB_TIMER
In reply to Clément LégerThis will allow using the TCB timer instead of the PIT one when running under OP-TEE.
--- configs/sama5d2_icp_mmc_defconfig | 1 + configs/sama5d2_ptc_ek_mmc_defconfig | 1 + configs/sama5d2_ptc_ek_nandflash_defconfig | 1 + configs/sama5d2_xplained_emmc_defconfig | 1 + configs/sama5d2_xplained_mmc_defconfig | 1 + configs/sama5d2_xplained_qspiflash_defconfig | 1 + configs/sama5d2_xplained_spiflash_defconfig | 1 + 7 files changed, 7 insertions(+)
configs/sama5d2_icp_mmc_defconfig +1 -0
@@ -83,5 +83,6 @@ CONFIG_ATMEL_USART=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y CONFIG_ATMEL_PIT_TIMER=y +CONFIG_ATMEL_TCB_TIMER=y CONFIG_OF_LIBFDT_OVERLAY=y # CONFIG_EFI_LOADER_HII is not set
configs/sama5d2_ptc_ek_mmc_defconfig +1 -0
@@ -72,6 +72,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_TIMER=y CONFIG_ATMEL_PIT_TIMER=y +CONFIG_ATMEL_TCB_TIMER=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/sama5d2_ptc_ek_nandflash_defconfig +1 -0
@@ -72,6 +72,7 @@ CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_ATMEL_USART=y CONFIG_TIMER=y CONFIG_ATMEL_PIT_TIMER=y +CONFIG_ATMEL_TCB_TIMER=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/sama5d2_xplained_emmc_defconfig +1 -0
@@ -91,6 +91,7 @@ CONFIG_ATMEL_QSPI=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y CONFIG_ATMEL_PIT_TIMER=y +CONFIG_ATMEL_TCB_TIMER=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/sama5d2_xplained_mmc_defconfig +1 -0
@@ -93,6 +93,7 @@ CONFIG_ATMEL_QSPI=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y CONFIG_ATMEL_PIT_TIMER=y +CONFIG_ATMEL_TCB_TIMER=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/sama5d2_xplained_qspiflash_defconfig +1 -0
@@ -92,6 +92,7 @@ CONFIG_ATMEL_QSPI=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y CONFIG_ATMEL_PIT_TIMER=y +CONFIG_ATMEL_TCB_TIMER=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
configs/sama5d2_xplained_spiflash_defconfig +1 -0
@@ -96,6 +96,7 @@ CONFIG_ATMEL_QSPI=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y CONFIG_ATMEL_PIT_TIMER=y +CONFIG_ATMEL_TCB_TIMER=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y
Signature · 1 line
2.34.1