Skip to contentSkip to conversation

staging: fbtft: removed space before ')' and after '(' parenthesis.

PATCH Superseded Navya Sri Nizamkari 2 participants 5 messages Feb 18, 2015 – Feb 19, 2015

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 staging: fbtft: removed space before ')' and after '(' parenthesis.

This fixes the following checkpatch.pl errors:

ERROR: space prohibited after that open parenthesis '('
ERROR: space prohibited before that close parenthesis ')'

---
 drivers/staging/fbtft/fb_bd663474.c | 76 ++++++++++++++++++-------------------
 1 file changed, 38 insertions(+), 38 deletions(-)
drivers/staging/fbtft/fb_bd663474.c +38 -38
index 7e00c60..b64a0b9 100644
@@ -47,49 +47,49 @@ static int init_display(struct fbtft_par *par)
 	/* Initialization sequence from Lib_UTFT */
 
 	/* oscillator start */
-	write_reg(par, 0x000,0x0001);	/*oscillator 0: stop, 1: operation */
+	write_reg(par, 0x000, 0x0001);	/*oscillator 0: stop, 1: operation */
 	mdelay(10);
 
 	/* Power settings */
-	write_reg(par, 0x100, 0x0000 ); /* power supply setup */
-	write_reg(par, 0x101, 0x0000 );
-	write_reg(par, 0x102, 0x3110 );
-	write_reg(par, 0x103, 0xe200 );
-	write_reg(par, 0x110, 0x009d );
-	write_reg(par, 0x111, 0x0022 );
-	write_reg(par, 0x100, 0x0120 );
-	mdelay( 20 );
-
-	write_reg(par, 0x100, 0x3120 );
-	mdelay( 80 );
+	write_reg(par, 0x100, 0x0000); /* power supply setup */
+	write_reg(par, 0x101, 0x0000);
+	write_reg(par, 0x102, 0x3110);
+	write_reg(par, 0x103, 0xe200);
+	write_reg(par, 0x110, 0x009d);
+	write_reg(par, 0x111, 0x0022);
+	write_reg(par, 0x100, 0x0120);
+	mdelay(20);
+
+	write_reg(par, 0x100, 0x3120);
+	mdelay(80);
 	/* Display control */
-	write_reg(par, 0x001, 0x0100 );
-	write_reg(par, 0x002, 0x0000 );
-	write_reg(par, 0x003, 0x1230 );
-	write_reg(par, 0x006, 0x0000 );
-	write_reg(par, 0x007, 0x0101 );
-	write_reg(par, 0x008, 0x0808 );
-	write_reg(par, 0x009, 0x0000 );
-	write_reg(par, 0x00b, 0x0000 );
-	write_reg(par, 0x00c, 0x0000 );
-	write_reg(par, 0x00d, 0x0018 );
+	write_reg(par, 0x001, 0x0100);
+	write_reg(par, 0x002, 0x0000);
+	write_reg(par, 0x003, 0x1230);
+	write_reg(par, 0x006, 0x0000);
+	write_reg(par, 0x007, 0x0101);
+	write_reg(par, 0x008, 0x0808);
+	write_reg(par, 0x009, 0x0000);
+	write_reg(par, 0x00b, 0x0000);
+	write_reg(par, 0x00c, 0x0000);
+	write_reg(par, 0x00d, 0x0018);
 	/* LTPS control settings */
-	write_reg(par, 0x012, 0x0000 );
-	write_reg(par, 0x013, 0x0000 );
-	write_reg(par, 0x018, 0x0000 );
-	write_reg(par, 0x019, 0x0000 );
-
-	write_reg(par, 0x203, 0x0000 );
-	write_reg(par, 0x204, 0x0000 );
-
-	write_reg(par, 0x210, 0x0000 );
-	write_reg(par, 0x211, 0x00ef );
-	write_reg(par, 0x212, 0x0000 );
-	write_reg(par, 0x213, 0x013f );
-	write_reg(par, 0x214, 0x0000 );
-	write_reg(par, 0x215, 0x0000 );
-	write_reg(par, 0x216, 0x0000 );
-	write_reg(par, 0x217, 0x0000 );
+	write_reg(par, 0x012, 0x0000);
+	write_reg(par, 0x013, 0x0000);
+	write_reg(par, 0x018, 0x0000);
+	write_reg(par, 0x019, 0x0000);
+
+	write_reg(par, 0x203, 0x0000);
+	write_reg(par, 0x204, 0x0000);
+
+	write_reg(par, 0x210, 0x0000);
+	write_reg(par, 0x211, 0x00ef);
+	write_reg(par, 0x212, 0x0000);
+	write_reg(par, 0x213, 0x013f);
+	write_reg(par, 0x214, 0x0000);
+	write_reg(par, 0x215, 0x0000);
+	write_reg(par, 0x216, 0x0000);
+	write_reg(par, 0x217, 0x0000);
 
 	/* Gray scale settings */
 	write_reg(par, 0x300, 0x5343);
Signature · 1 line
1.9.1
#1 lore raw
Quoted 15 lines · Navya Sri Nizamkari

This fixes the following checkpatch.pl errors:

ERROR: space prohibited after that open parenthesis '('
ERROR: space prohibited before that close parenthesis ')'

---
 drivers/staging/fbtft/fb_bd663474.c | 76 ++++++++++++++++++-------------------
 1 file changed, 38 insertions(+), 38 deletions(-)
drivers/staging/fbtft/fb_bd663474.c +0 -0
index 7e00c60..b64a0b9 100644

drivers/staging/fbtft/fb_bd663474.c static int init_display(struct fbtft_par *par) · line 50

Quoted 5 lines
drivers/staging/fbtft/fb_bd663474.c +1 -1
@@ -47,49 +47,49 @@ static int init_display(struct fbtft_par *par)
 	/* Initialization sequence from Lib_UTFT */
 
 	/* oscillator start */
-	write_reg(par, 0x000,0x0001);	/*oscillator 0: stop, 1: operation */
+	write_reg(par, 0x000, 0x0001);	/*oscillator 0: stop, 1: operation */

This change doesn't match your commit message. Is it left over from a previous patch?

julia

Quoted 92 lines
drivers/staging/fbtft/fb_bd663474.c +37 -37
 	mdelay(10);
 
 	/* Power settings */
-	write_reg(par, 0x100, 0x0000 ); /* power supply setup */
-	write_reg(par, 0x101, 0x0000 );
-	write_reg(par, 0x102, 0x3110 );
-	write_reg(par, 0x103, 0xe200 );
-	write_reg(par, 0x110, 0x009d );
-	write_reg(par, 0x111, 0x0022 );
-	write_reg(par, 0x100, 0x0120 );
-	mdelay( 20 );
-
-	write_reg(par, 0x100, 0x3120 );
-	mdelay( 80 );
+	write_reg(par, 0x100, 0x0000); /* power supply setup */
+	write_reg(par, 0x101, 0x0000);
+	write_reg(par, 0x102, 0x3110);
+	write_reg(par, 0x103, 0xe200);
+	write_reg(par, 0x110, 0x009d);
+	write_reg(par, 0x111, 0x0022);
+	write_reg(par, 0x100, 0x0120);
+	mdelay(20);
+
+	write_reg(par, 0x100, 0x3120);
+	mdelay(80);
 	/* Display control */
-	write_reg(par, 0x001, 0x0100 );
-	write_reg(par, 0x002, 0x0000 );
-	write_reg(par, 0x003, 0x1230 );
-	write_reg(par, 0x006, 0x0000 );
-	write_reg(par, 0x007, 0x0101 );
-	write_reg(par, 0x008, 0x0808 );
-	write_reg(par, 0x009, 0x0000 );
-	write_reg(par, 0x00b, 0x0000 );
-	write_reg(par, 0x00c, 0x0000 );
-	write_reg(par, 0x00d, 0x0018 );
+	write_reg(par, 0x001, 0x0100);
+	write_reg(par, 0x002, 0x0000);
+	write_reg(par, 0x003, 0x1230);
+	write_reg(par, 0x006, 0x0000);
+	write_reg(par, 0x007, 0x0101);
+	write_reg(par, 0x008, 0x0808);
+	write_reg(par, 0x009, 0x0000);
+	write_reg(par, 0x00b, 0x0000);
+	write_reg(par, 0x00c, 0x0000);
+	write_reg(par, 0x00d, 0x0018);
 	/* LTPS control settings */
-	write_reg(par, 0x012, 0x0000 );
-	write_reg(par, 0x013, 0x0000 );
-	write_reg(par, 0x018, 0x0000 );
-	write_reg(par, 0x019, 0x0000 );
-
-	write_reg(par, 0x203, 0x0000 );
-	write_reg(par, 0x204, 0x0000 );
-
-	write_reg(par, 0x210, 0x0000 );
-	write_reg(par, 0x211, 0x00ef );
-	write_reg(par, 0x212, 0x0000 );
-	write_reg(par, 0x213, 0x013f );
-	write_reg(par, 0x214, 0x0000 );
-	write_reg(par, 0x215, 0x0000 );
-	write_reg(par, 0x216, 0x0000 );
-	write_reg(par, 0x217, 0x0000 );
+	write_reg(par, 0x012, 0x0000);
+	write_reg(par, 0x013, 0x0000);
+	write_reg(par, 0x018, 0x0000);
+	write_reg(par, 0x019, 0x0000);
+
+	write_reg(par, 0x203, 0x0000);
+	write_reg(par, 0x204, 0x0000);
+
+	write_reg(par, 0x210, 0x0000);
+	write_reg(par, 0x211, 0x00ef);
+	write_reg(par, 0x212, 0x0000);
+	write_reg(par, 0x213, 0x013f);
+	write_reg(par, 0x214, 0x0000);
+	write_reg(par, 0x215, 0x0000);
+	write_reg(par, 0x216, 0x0000);
+	write_reg(par, 0x217, 0x0000);
 
 	/* Gray scale settings */
 	write_reg(par, 0x300, 0x5343);
Signature · 8 lines
1.9.1

-- 
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20150218221315.GA14737%40localhost.
For more options, visit https://groups.google.com/d/optout.
#3 lore raw
Quoted 1 line · navya sri nizamkari

The open parenthesis error is with respect to the mdelay() function.ᅵ

Hi,

I think this is in response to my mail. When you respond, you should keep a bit of text from the other person, and your patch if it is appropriate, so that one can get the context.

I think that you need to redo your patch (send a v2) so that it only includes the space and parenthesis change, and not the space and comma change that you submitted previously. Probably you did not commit your file after the first change? You can use git add -p to add just part of a change, and then commit that. More information is available here, at the bottom of the page:

http://git-scm.com/book/en/v2/Git-Tools-Interactive-Staging

julia

Quoted 12 lines

--
You received this message because you are subscribed to the Google Groups
"outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to [email protected].
To post to this group, send email to [email protected].
To view this discussion on the web visithttps://groups.google.com/d/msgid/outreachy-kernel/6ffbe89f-e71b-4eec-93b4- b881d5aab211%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

#4 lore raw

Hi,
I'll make sure to reply inline from now.I'll send a new version of the patch for the ')' and space patch and an other patch for the ',' and space one.
Navya

Quoted 39 lines · Julia Lawall
Quoted 1 line · navya sri nizamkari

The open parenthesis error is with respect to the mdelay() function.

Hi,

I think this is in response to my mail. When you respond, you should keep a bit of text from the other person, and your patch if it is appropriate, so that one can get the context.

I think that you need to redo your patch (send a v2) so that it only includes the space and parenthesis change, and not the space and comma change that you submitted previously. Probably you did not commit your file after the first change? You can use git add -p to add just part of a change, and then commit that. More information is available here, at the bottom of the page:

http://git-scm.com/book/en/v2/Git-Tools-Interactive-Staging

julia

Quoted 3 lines
Signature · 2 lines
-- 
You received this message because you are subscribed to the Google 

Groups

Quoted 2 lines

"outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send

an

Quoted 2 lines

email to [email protected] <javascript:>. To post to this group, send email to [email protected]

<javascript:>.

Quoted 1 line

To view this discussion on the web visithttps://

groups.google.com/d/msgid/outreachy-kernel/6ffbe89f-e71b-4eec-93b4-

Quoted 4 lines

b881d5aab211%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.