More meson HDMI fixes
cover More meson HDMI fixes
Guillaume reported that my earlier fixes for the meson HDMI driver broke another set of machines which are now exploding (clock not enabled).
I have thus reconsidered the approach and came up with an alternative fix (enable a missing clock), which Guillaume confirmed to be working. Jerome pointed out that this driver is leaking clock references like a sieve, so that needed addressing too.
The first patch start by fixing the clock leakage using a devm facility.
The second patch addresses the earlier crash by reusing the infrastructure put together in the first patch.
Tested on VIM3l.
Marc Zyngier (2):
drm/meson: dw-hdmi: Disable clocks on driver teardown drm/meson: dw-hdmi: Enable the iahb clock early enough
drivers/gpu/drm/meson/meson_dw_hdmi.c | 51 ++++++++++++++++++--------- 1 file changed, 35 insertions(+), 16 deletions(-)
Signature · 6 lines
2.28.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 1/2 drm/meson: dw-hdmi: Disable clocks on driver teardown
The HDMI driver request clocks early, but never disable them, leaving the clocks on even when the driver is removed.
Fix it by slightly refactoring the clock code, and register a devm action that will eventually disable/unprepare the enabled clocks.
--- drivers/gpu/drm/meson/meson_dw_hdmi.c | 43 ++++++++++++++++++--------- 1 file changed, 29 insertions(+), 14 deletions(-)
drivers/gpu/drm/meson/meson_dw_hdmi.c +29 -14
@@ -145,8 +145,6 @@ struct meson_dw_hdmi {struct reset_control *hdmitx_apb;struct reset_control *hdmitx_ctrl;struct reset_control *hdmitx_phy; -struct clk *hdmi_pclk; -struct clk *venci_clk;struct regulator *hdmi_supply;u32 irq_stat;struct dw_hdmi *hdmi;
@@ -946,6 +944,29 @@ static void meson_disable_regulator(void *data)regulator_disable (data); } +static void meson_disable_clk (void *data) +{ +clk_disable_unprepare (data); +} + +static int meson_enable_clk (struct device *dev,char *name) +{ +struct clk *clk; +int ret; + + clk =devm_clk_get (dev, name); +if (IS_ERR (clk)) { +dev_err (dev,"Unable to get %s pclk\n" , name); +return PTR_ERR (clk); + } + + ret =clk_prepare_enable (clk); +if (!ret) + ret =devm_add_action_or_reset (dev, meson_disable_clk, clk); + +return ret; +} +static int meson_dw_hdmi_bind (struct device *dev,struct device *master,void *data) {
@@ -1026,19 +1047,13 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,if (IS_ERR (meson_dw_hdmi->hdmitx))return PTR_ERR (meson_dw_hdmi->hdmitx); - meson_dw_hdmi->hdmi_pclk =devm_clk_get (dev,"isfr" ); -if (IS_ERR (meson_dw_hdmi->hdmi_pclk)) { -dev_err (dev,"Unable to get HDMI pclk\n" ); -return PTR_ERR (meson_dw_hdmi->hdmi_pclk); - } -clk_prepare_enable (meson_dw_hdmi->hdmi_pclk); + ret =meson_enable_clk (dev,"isfr" ); +if (ret) +return ret; - meson_dw_hdmi->venci_clk =devm_clk_get (dev,"venci" ); -if (IS_ERR (meson_dw_hdmi->venci_clk)) { -dev_err (dev,"Unable to get venci clk\n" ); -return PTR_ERR (meson_dw_hdmi->venci_clk); - } -clk_prepare_enable (meson_dw_hdmi->venci_clk); + ret =meson_enable_clk (dev,"venci" ); +if (ret) +return ret; dw_plat_data->regm =devm_regmap_init (dev,NULL , meson_dw_hdmi, &meson_dw_hdmi_regmap_config);
Signature · 6 lines
2.28.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 1/2] drm/meson: dw-hdmi: Disable clocks on driver teardown
Quoted 71 lines · Marc Zyngier
The HDMI driver request clocks early, but never disable them, leaving the clocks on even when the driver is removed.
Fix it by slightly refactoring the clock code, and register a devm action that will eventually disable/unprepare the enabled clocks.
Signed-off-by Marc Zyngier <[email protected]>--- drivers/gpu/drm/meson/meson_dw_hdmi.c | 43 ++++++++++++++++++--------- 1 file changed, 29 insertions(+), 14 deletions(-)drivers/gpu/drm/meson/meson_dw_hdmi.c +26
-10@@ -145,8 +145,6 @@ struct meson_dw_hdmi {struct reset_control *hdmitx_apb;struct reset_control *hdmitx_ctrl;struct reset_control *hdmitx_phy; -struct clk *hdmi_pclk; -struct clk *venci_clk;struct regulator *hdmi_supply;u32 irq_stat;struct dw_hdmi *hdmi;@@ -946,6 +944,29 @@ static void meson_disable_regulator(void *data)regulator_disable (data); } +static void meson_disable_clk (void *data) +{ +clk_disable_unprepare (data); +} + +static int meson_enable_clk (struct device *dev,char *name) +{ +struct clk *clk; +int ret; + + clk =devm_clk_get (dev, name); +if (IS_ERR (clk)) { +dev_err (dev,"Unable to get %s pclk\n" , name); +return PTR_ERR (clk); + } + + ret =clk_prepare_enable (clk); +if (!ret) + ret =devm_add_action_or_reset (dev, meson_disable_clk, clk); + +return ret; +} +static int meson_dw_hdmi_bind (struct device *dev,struct device *master,void *data) {@@ -1026,19 +1047,13 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,if (IS_ERR (meson_dw_hdmi->hdmitx))return PTR_ERR (meson_dw_hdmi->hdmitx); - meson_dw_hdmi->hdmi_pclk =devm_clk_get (dev,"isfr" ); -if (IS_ERR (meson_dw_hdmi->hdmi_pclk)) { -dev_err (dev,"Unable to get HDMI pclk\n" ); -return PTR_ERR (meson_dw_hdmi->hdmi_pclk); - } -clk_prepare_enable (meson_dw_hdmi->hdmi_pclk); + ret =meson_enable_clk (dev,"isfr" ); +if (ret) +return ret; - meson_dw_hdmi->venci_clk =devm_clk_get (dev,"venci" ); -if (IS_ERR (meson_dw_hdmi->venci_clk)) {
drivers/gpu/drm/meson/meson_dw_hdmi.c static int meson_dw_hdmi_bind(struct device *dev, struct device *master, · line 1059
Quoted 10 lines
drivers/gpu/drm/meson/meson_dw_hdmi.c +3
-4-dev_err (dev,"Unable to get venci clk\n" ); -return PTR_ERR (meson_dw_hdmi->venci_clk); - } -clk_prepare_enable (meson_dw_hdmi->venci_clk); + ret =meson_enable_clk (dev,"venci" ); +if (ret) +return ret; dw_plat_data->regm =devm_regmap_init (dev,NULL , meson_dw_hdmi, &meson_dw_hdmi_regmap_config);
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Jerome Brunet
reviewerRe: [PATCH 1/2] drm/meson: dw-hdmi: Disable clocks on driver teardown
In reply to Marc ZyngierQuoted 38 lines · Marc Zyngier
The HDMI driver request clocks early, but never disable them, leaving the clocks on even when the driver is removed.
Fix it by slightly refactoring the clock code, and register a devm action that will eventually disable/unprepare the enabled clocks.
Signed-off-by Marc Zyngier <[email protected]>--- drivers/gpu/drm/meson/meson_dw_hdmi.c | 43 ++++++++++++++++++--------- 1 file changed, 29 insertions(+), 14 deletions(-)drivers/gpu/drm/meson/meson_dw_hdmi.c +10
-2@@ -145,8 +145,6 @@ struct meson_dw_hdmi {struct reset_control *hdmitx_apb;struct reset_control *hdmitx_ctrl;struct reset_control *hdmitx_phy; -struct clk *hdmi_pclk; -struct clk *venci_clk;struct regulator *hdmi_supply;u32 irq_stat;struct dw_hdmi *hdmi;@@ -946,6 +944,29 @@ static void meson_disable_regulator(void *data)regulator_disable (data); } +static void meson_disable_clk (void *data) +{ +clk_disable_unprepare (data); +} + +static int meson_enable_clk (struct device *dev,char *name) +{ +struct clk *clk; +int ret; +
drivers/gpu/drm/meson/meson_dw_hdmi.c static void meson_disable_regulator(void *data) · line 966
Quoted 10 lines
drivers/gpu/drm/meson/meson_dw_hdmi.c +9
-0+ clk =devm_clk_get (dev, name); +if (IS_ERR (clk)) { +dev_err (dev,"Unable to get %s pclk\n" , name); +return PTR_ERR (clk); + } + + ret =clk_prepare_enable (clk); +if (!ret) + ret =devm_add_action_or_reset (dev, meson_disable_clk, clk);
Thanks for fixing this Marc.
FYI, while it is fine to declare a function to disable the clocks, a quick cast may avoid it
devm_add_action_or_reset(dev, (void(*)(void *))clk_disable_unprepare, clk);
Quoted 23 lines
drivers/gpu/drm/meson/meson_dw_hdmi.c +4
-0+ +return ret; +} +static int meson_dw_hdmi_bind (struct device *dev,struct device *master,void *data){
drivers/gpu/drm/meson/meson_dw_hdmi.c +3
-8@@ -1026,19 +1047,13 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,if (IS_ERR (meson_dw_hdmi->hdmitx))return PTR_ERR (meson_dw_hdmi->hdmitx); - meson_dw_hdmi->hdmi_pclk =devm_clk_get (dev,"isfr" ); -if (IS_ERR (meson_dw_hdmi->hdmi_pclk)) { -dev_err (dev,"Unable to get HDMI pclk\n" ); -return PTR_ERR (meson_dw_hdmi->hdmi_pclk); - } -clk_prepare_enable (meson_dw_hdmi->hdmi_pclk); + ret =meson_enable_clk (dev,"isfr" ); +if (ret) +return ret; - meson_dw_hdmi->venci_clk =devm_clk_get (dev,"venci" ); -if (IS_ERR (meson_dw_hdmi->venci_clk)) {
drivers/gpu/drm/meson/meson_dw_hdmi.c static int meson_dw_hdmi_bind(struct device *dev, struct device *master, · line 1059
Quoted 10 lines
drivers/gpu/drm/meson/meson_dw_hdmi.c +3
-4-dev_err (dev,"Unable to get venci clk\n" ); -return PTR_ERR (meson_dw_hdmi->venci_clk); - } -clk_prepare_enable (meson_dw_hdmi->venci_clk); + ret =meson_enable_clk (dev,"venci" ); +if (ret) +return ret; dw_plat_data->regm =devm_regmap_init (dev,NULL , meson_dw_hdmi, &meson_dw_hdmi_regmap_config);
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 1/2] drm/meson: dw-hdmi: Disable clocks on driver teardown
Quoted 54 lines · Jerome Brunet
Quoted 39 lines · Marc Zyngier
The HDMI driver request clocks early, but never disable them, leaving the clocks on even when the driver is removed.
Fix it by slightly refactoring the clock code, and register a devm action that will eventually disable/unprepare the enabled clocks.
Signed-off-by Marc Zyngier <[email protected]>--- drivers/gpu/drm/meson/meson_dw_hdmi.c | 43 ++++++++++++++++++--------- 1 file changed, 29 insertions(+), 14 deletions(-)drivers/gpu/drm/meson/meson_dw_hdmi.c +10
-2@@ -145,8 +145,6 @@ struct meson_dw_hdmi {struct reset_control *hdmitx_apb;struct reset_control *hdmitx_ctrl;struct reset_control *hdmitx_phy; -struct clk *hdmi_pclk; -struct clk *venci_clk;struct regulator *hdmi_supply;u32 irq_stat;struct dw_hdmi *hdmi;@@ -946,6 +944,29 @@ static void meson_disable_regulator(void *data)regulator_disable (data); } +static void meson_disable_clk (void *data) +{ +clk_disable_unprepare (data); +} + +static int meson_enable_clk (struct device *dev,char *name) +{ +struct clk *clk; +int ret; +drivers/gpu/drm/meson/meson_dw_hdmi.c static void meson_disable_regulator(void *data) · line 966
Quoted 10 lines
drivers/gpu/drm/meson/meson_dw_hdmi.c +9
-0+ clk =devm_clk_get (dev, name); +if (IS_ERR (clk)) { +dev_err (dev,"Unable to get %s pclk\n" , name); +return PTR_ERR (clk); + } + + ret =clk_prepare_enable (clk); +if (!ret) + ret =devm_add_action_or_reset (dev, meson_disable_clk, clk);Thanks for fixing this Marc.
Quoted 4 lines
FYI, while it is fine to declare a function to disable the clocks, a quick cast may avoid it
devm_add_action_or_reset(dev, (void(*)(void *))clk_disable_unprepare, clk);
While this works for now, a change to the clk_disable_unprepare() prototype (such as adding a second argument) would now go completely unnoticed (after all, you've cast the function, it *must* be correct, right?), and someone would spend a few hours trying to track down memory corruption or some other interesting results.
Yes, casting C functions can be hilarious.
I can see a few uses of this hack in the tree, and I have my pop-corn ready.
Thanks,
M.
Signature · 5 lines
Jazz is not dead. It just smells funny... _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 2/2 drm/meson: dw-hdmi: Enable the iahb clock early enough
In reply to Marc ZyngierInstead of moving meson_dw_hdmi_init() around which breaks existing platform, let's enable the clock meson_dw_hdmi_init() depends on. This means we don't have to worry about this clock being enabled or not, depending on the boot-loader features.
--- drivers/gpu/drm/meson/meson_dw_hdmi.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/gpu/drm/meson/meson_dw_hdmi.c +6 -2
@@ -1051,6 +1051,10 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,if (ret)return ret; + ret =meson_enable_clk (dev,"iahb" ); +if (ret) +return ret; + ret =meson_enable_clk (dev,"venci" );if (ret)return ret;
@@ -1086,6 +1090,8 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master, encoder->possible_crtcs =BIT (0 ); +meson_dw_hdmi_init (meson_dw_hdmi); +DRM_DEBUG_DRIVER ("encoder initialized\n" );/* Bridge / Connector */
@@ -1110,8 +1116,6 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,if (IS_ERR (meson_dw_hdmi->hdmi))return PTR_ERR (meson_dw_hdmi->hdmi); -meson_dw_hdmi_init (meson_dw_hdmi); - next_bridge =of_drm_find_bridge (pdev->dev.of_node);if (next_bridge) drm_bridge_attach(encoder, next_bridge,
Signature · 6 lines
2.28.0 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/2] drm/meson: dw-hdmi: Enable the iahb clock early enough
Quoted 7 lines · Marc Zyngier
Instead of moving
meson_dw_hdmi_init()around which breaks existing platform, let's enable the clockmeson_dw_hdmi_init()depends on. This means we don't have to worry about this clock being enabled or not, depending on the boot-loader features.Fixes b33340e33acd ("drm/meson: dw-hdmi: Ensure that clocks are enabled before touching the TOP registers")Reported-by Guillaume Tucker <[email protected]>
Although I am triaging kernelci bisections, it was initially found thanks to our friendly bot. So if you're OK with this, it would most definitely appreciate a mention:
Thanks,
Guillaume
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/2] drm/meson: dw-hdmi: Enable the iahb clock early enough
Quoted 6 lines · Guillaume Tucker
Quoted 5 lines · Marc Zyngier
Instead of moving
meson_dw_hdmi_init()around which breaks existing platform, let's enable the clockmeson_dw_hdmi_init()depends on. This means we don't have to worry about this clock being enabled or not, depending on the boot-loader features.
Quoted 8 lines
Quoted 2 lines
Fixes b33340e33acd ("drm/meson: dw-hdmi: Ensure that clocks are enabled before touching the TOP registers")Reported-by Guillaume Tucker <[email protected]>Although I am triaging kernelci bisections, it was initially found thanks to our friendly bot. So if you're OK with this, it would most definitely appreciate a mention:
Reported-by "kernelci.org bot" <[email protected]>
Sure. Neil can add this when (and if) he applies these patches.
Thanks,
M.
Signature · 5 lines
Jazz is not dead. It just smells funny... _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/2] drm/meson: dw-hdmi: Enable the iahb clock early enough
Quoted 10 lines · Marc Zyngier
Quoted 9 lines · Guillaume Tucker
Quoted 7 lines · Marc Zyngier
Instead of moving
meson_dw_hdmi_init()around which breaks existing platform, let's enable the clockmeson_dw_hdmi_init()depends on. This means we don't have to worry about this clock being enabled or not, depending on the boot-loader features.Fixes b33340e33acd ("drm/meson: dw-hdmi: Ensure that clocks are enabled before touching the TOP registers")Reported-by Guillaume Tucker <[email protected]>
Quoted 7 lines
Quoted 5 lines
Although I am triaging kernelci bisections, it was initially found thanks to our friendly bot. So if you're OK with this, it would most definitely appreciate a mention:
Reported-by "kernelci.org bot" <[email protected]>Sure. Neil can add this when (and if) he applies these patches.
Yep applying to drm-misc-next and switching to Reported-by: "kernelci.org bot" <[email protected]>
Thanks
Neil
Quoted 4 lines
Thanks,
M.
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 2/2] drm/meson: dw-hdmi: Enable the iahb clock early enough
In reply to Marc ZyngierQuoted 39 lines · Marc Zyngier
Instead of moving
meson_dw_hdmi_init()around which breaks existing platform, let's enable the clockmeson_dw_hdmi_init()depends on. This means we don't have to worry about this clock being enabled or not, depending on the boot-loader features.Fixes b33340e33acd ("drm/meson: dw-hdmi: Ensure that clocks are enabled before touching the TOP registers")Reported-by Guillaume Tucker <[email protected]>Tested-by Guillaume Tucker <[email protected]>Signed-off-by Marc Zyngier <[email protected]>--- drivers/gpu/drm/meson/meson_dw_hdmi.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)drivers/gpu/drm/meson/meson_dw_hdmi.c +6
-0@@ -1051,6 +1051,10 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,if (ret)return ret; + ret =meson_enable_clk (dev,"iahb" ); +if (ret) +return ret; + ret =meson_enable_clk (dev,"venci" );if (ret)return ret;@@ -1086,6 +1090,8 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master, encoder->possible_crtcs =BIT (0 ); +meson_dw_hdmi_init (meson_dw_hdmi); +DRM_DEBUG_DRIVER ("encoder initialized\n" );/* Bridge / Connector */
drivers/gpu/drm/meson/meson_dw_hdmi.c static int meson_dw_hdmi_bind(struct device *dev, struct device *master, · line 1121
Quoted 8 lines
drivers/gpu/drm/meson/meson_dw_hdmi.c +0
-2@@ -1110,8 +1116,6 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master,if (IS_ERR (meson_dw_hdmi->hdmi))return PTR_ERR (meson_dw_hdmi->hdmi); -meson_dw_hdmi_init (meson_dw_hdmi); - next_bridge =of_drm_find_bridge (pdev->dev.of_node);if (next_bridge) drm_bridge_attach(encoder, next_bridge,