Skip to contentSkip to conversation

xfs: flush related error handling cleanups

PATCH In review Brian Foster 4 participants 37 messages May 4, 2020 – May 7, 2020 XFS filesystem

lore
Share & tools
lore
#0 lore raw

v4 cover xfs: flush related error handling cleanups

Hi all,

I think everything has been reviewed to this point. Only minor changes noted below in this release. A git repo is available here[1].

The only outstanding feedback that I'm aware of is Dave's comment on patch 7 of v3 [2] regarding the shutdown assert check. I'm not aware of any means to get through xfs_wait_buftarg() with a dirty buffer that hasn't undergone the permanant error sequence and thus shut down the fs. I'm personally fine with any option among dropping the assert, keeping it or replacing it with a shutdown invocation because atm I don't see it making much of a functional difference, but I left it alone because the patch is otherwise reviewed.

Thoughts, reviews, flames appreciated.

Brian

[1] https://github.com/bsfost/linux-xfs/tree/xfs-flush-error-handling-cleanups-v4
[2] https://lore.kernel.org/linux-xfs/20200501112408.GB40250@bfoster/

v4:
- Remove unnecessary xfs_trans_ail_delete() comment.
- Add Fixes: tag to dqflush duplicate verification patch.
v3: https://lore.kernel.org/linux-xfs/[email protected]/
- Drop flags param from xfs_buf_ioend_fail().
- Fix up iflush error handling patch subject and comments.
- Drop failed buffer ->ail_lock bypass patch.
- Split up AIL removal cleanup patch and dropped switch of call from xfs_buf_item_put().
- Rework XBF_WRITE_FAIL to reflect current buffer state.
- Create helper for ratelimited buffer alerts and use appropriately.
- Use BLK_STS_IOERR instead of errno_to_blk_status().
- Drop unused param from xfs_imap_to_bp().
v2: https://lore.kernel.org/linux-xfs/[email protected]/
- Rename some helper functions.
- Fix up dquot flush verifier instead of removing it.
- Drop quotaoff push handler removal patch.
- Reuse existing ratelimit state for buffer error messages.
- Combine AIL removal helpers.
- Refactor iflush error handling rework to update log item.
- Remove unused shutdown types.
v1: https://lore.kernel.org/linux-xfs/[email protected]/

Brian Foster (17):
xfs: refactor failed buffer resubmission into xfsaild
xfs: factor out buffer I/O failure code
xfs: simplify inode flush error handling
xfs: remove unnecessary shutdown check from xfs_iflush()
xfs: reset buffer write failure state on successful completion
xfs: refactor ratelimited buffer error messages into helper
xfs: ratelimit unmount time per-buffer I/O error alert
xfs: fix duplicate verification from xfs_qm_dqflush()
xfs: abort consistently on dquot flush failure
xfs: acquire ->ail_lock from xfs_trans_ail_delete()
xfs: use delete helper for items expected to be in AIL
xfs: drop unused shutdown parameter from xfs_trans_ail_remove()
xfs: combine xfs_trans_ail_[remove|delete]()
xfs: remove unused iflush stale parameter
xfs: random buffer write failure errortag
xfs: remove unused shutdown types
xfs: remove unused iget_flags param from xfs_imap_to_bp()

 fs/xfs/libxfs/xfs_errortag.h  |   4 +-
 fs/xfs/libxfs/xfs_inode_buf.c |  12 +--
 fs/xfs/libxfs/xfs_inode_buf.h |   2 +-
 fs/xfs/scrub/ialloc.c         |   3 +-
 fs/xfs/xfs_bmap_item.c        |   2 +-
 fs/xfs/xfs_buf.c              |  65 ++++++++++++----
 fs/xfs/xfs_buf.h              |   2 +
 fs/xfs/xfs_buf_item.c         | 106 +++++---------------------
 fs/xfs/xfs_buf_item.h         |   2 -
 fs/xfs/xfs_dquot.c            |  47 +++++-------
 fs/xfs/xfs_dquot_item.c       |  17 +----
 fs/xfs/xfs_error.c            |   3 +
 fs/xfs/xfs_extfree_item.c     |   2 +-
 fs/xfs/xfs_fsops.c            |   5 +-
 fs/xfs/xfs_icache.c           |   2 +-
 fs/xfs/xfs_inode.c            | 139 ++++++++++++----------------------
 fs/xfs/xfs_inode_item.c       |  28 +------
 fs/xfs/xfs_inode_item.h       |   2 +-
 fs/xfs/xfs_log_recover.c      |   2 +-
 fs/xfs/xfs_message.c          |  22 ++++++
 fs/xfs/xfs_message.h          |   3 +
 fs/xfs/xfs_mount.h            |   2 -
 fs/xfs/xfs_refcount_item.c    |   2 +-
 fs/xfs/xfs_rmap_item.c        |   2 +-
 fs/xfs/xfs_trans_ail.c        |  68 +++++++++++------
 fs/xfs/xfs_trans_priv.h       |  18 +----
 26 files changed, 231 insertions(+), 331 deletions(-)
Signature · 1 line
2.21.1
#1 lore raw

PATCH v4 1/17 xfs: refactor failed buffer resubmission into xfsaild

Flush locked log items whose underlying buffers fail metadata writeback are tagged with a special flag to indicate that the flush lock is already held. This is currently implemented in the type specific ->iop_push() callback, but the processing required for such items is not type specific because we're only doing basic state management on the underlying buffer.

Factor the failed log item handling out of the inode and dquot ->iop_push() callbacks and open code the buffer resubmit helper into a single helper called from xfsaild_push_item(). This provides a generic mechanism for handling failed metadata buffer writeback with a bit less code.

---
 fs/xfs/xfs_buf_item.c   | 39 ---------------------------------------
 fs/xfs/xfs_buf_item.h   |  2 --
 fs/xfs/xfs_dquot_item.c | 15 ---------------
 fs/xfs/xfs_inode_item.c | 15 ---------------
 fs/xfs/xfs_trans_ail.c  | 41 +++++++++++++++++++++++++++++++++++++++++
 5 files changed, 41 insertions(+), 71 deletions(-)
fs/xfs/xfs_buf_item.c +0 -39
index 1545657c3ca0..8796adde2d12 100644
@@ -1248,42 +1248,3 @@ xfs_buf_iodone(
 	xfs_trans_ail_delete(ailp, lip, SHUTDOWN_CORRUPT_INCORE);
 	xfs_buf_item_free(BUF_ITEM(lip));
 }
-
-/*
- * Requeue a failed buffer for writeback.
- *
- * We clear the log item failed state here as well, but we have to be careful
- * about reference counts because the only active reference counts on the buffer
- * may be the failed log items. Hence if we clear the log item failed state
- * before queuing the buffer for IO we can release all active references to
- * the buffer and free it, leading to use after free problems in
- * xfs_buf_delwri_queue. It makes no difference to the buffer or log items which
- * order we process them in - the buffer is locked, and we own the buffer list
- * so nothing on them is going to change while we are performing this action.
- *
- * Hence we can safely queue the buffer for IO before we clear the failed log
- * item state, therefore  always having an active reference to the buffer and
- * avoiding the transient zero-reference state that leads to use-after-free.
- *
- * Return true if the buffer was added to the buffer list, false if it was
- * already on the buffer list.
- */
-bool
-xfs_buf_resubmit_failed_buffers(
-	struct xfs_buf		*bp,
-	struct list_head	*buffer_list)
-{
-	struct xfs_log_item	*lip;
-	bool			ret;
-
-	ret = xfs_buf_delwri_queue(bp, buffer_list);
-
-	/*
-	 * XFS_LI_FAILED set/clear is protected by ail_lock, caller of this
-	 * function already have it acquired
-	 */
-	list_for_each_entry(lip, &bp->b_li_list, li_bio_list)
-		xfs_clear_li_failed(lip);
-
-	return ret;
-}
fs/xfs/xfs_buf_item.h +0 -2
index 30114b510332..c9c57e2da932 100644
@@ -59,8 +59,6 @@ void	xfs_buf_attach_iodone(struct xfs_buf *,
 			      struct xfs_log_item *);
 void	xfs_buf_iodone_callbacks(struct xfs_buf *);
 void	xfs_buf_iodone(struct xfs_buf *, struct xfs_log_item *);
-bool	xfs_buf_resubmit_failed_buffers(struct xfs_buf *,
-					struct list_head *);
 bool	xfs_buf_log_check_iovec(struct xfs_log_iovec *iovec);
 
 extern kmem_zone_t	*xfs_buf_item_zone;
fs/xfs/xfs_dquot_item.c +0 -15
index baad1748d0d1..5a7808299a32 100644
@@ -145,21 +145,6 @@ xfs_qm_dquot_logitem_push(
 	if (atomic_read(&dqp->q_pincount) > 0)
 		return XFS_ITEM_PINNED;
 
-	/*
-	 * The buffer containing this item failed to be written back
-	 * previously. Resubmit the buffer for IO
-	 */
-	if (test_bit(XFS_LI_FAILED, &lip->li_flags)) {
-		if (!xfs_buf_trylock(bp))
-			return XFS_ITEM_LOCKED;
-
-		if (!xfs_buf_resubmit_failed_buffers(bp, buffer_list))
-			rval = XFS_ITEM_FLUSHING;
-
-		xfs_buf_unlock(bp);
-		return rval;
-	}
-
 	if (!xfs_dqlock_nowait(dqp))
 		return XFS_ITEM_LOCKED;
 
fs/xfs/xfs_inode_item.c +0 -15
index f779cca2346f..1d4d256a2e96 100644
@@ -497,21 +497,6 @@ xfs_inode_item_push(
 	if (xfs_ipincount(ip) > 0)
 		return XFS_ITEM_PINNED;
 
-	/*
-	 * The buffer containing this item failed to be written back
-	 * previously. Resubmit the buffer for IO.
-	 */
-	if (test_bit(XFS_LI_FAILED, &lip->li_flags)) {
-		if (!xfs_buf_trylock(bp))
-			return XFS_ITEM_LOCKED;
-
-		if (!xfs_buf_resubmit_failed_buffers(bp, buffer_list))
-			rval = XFS_ITEM_FLUSHING;
-
-		xfs_buf_unlock(bp);
-		return rval;
-	}
-
 	if (!xfs_ilock_nowait(ip, XFS_ILOCK_SHARED))
 		return XFS_ITEM_LOCKED;
 
fs/xfs/xfs_trans_ail.c +41 -0

53 lines not on this page · raw message

Signature · 1 line
2.21.1
#2 lore raw

PATCH v4 2/17 xfs: factor out buffer I/O failure code

In reply to Brian Foster

We use the same buffer I/O failure code in a few different places. It's not much code, but it's not necessarily self-explanatory. Factor it into a helper and document it in one place.

---
 fs/xfs/xfs_buf.c      | 21 +++++++++++++++++----
 fs/xfs/xfs_buf.h      |  1 +
 fs/xfs/xfs_buf_item.c | 21 +++------------------
 fs/xfs/xfs_inode.c    |  6 +-----
 4 files changed, 22 insertions(+), 27 deletions(-)
fs/xfs/xfs_buf.c +17 -4
index 9ec3eaf1c618..d5d6a68bb1e6 100644
@@ -1248,6 +1248,22 @@ xfs_buf_ioerror_alert(
 			-bp->b_error);
 }
 
+/*
+ * To simulate an I/O failure, the buffer must be locked and held with at least
+ * three references. The LRU reference is dropped by the stale call. The buf
+ * item reference is dropped via ioend processing. The third reference is owned
+ * by the caller and is dropped on I/O completion if the buffer is XBF_ASYNC.
+ */
+void
+xfs_buf_ioend_fail(
+	struct xfs_buf	*bp)
+{
+	bp->b_flags &= ~XBF_DONE;
+	xfs_buf_stale(bp);
+	xfs_buf_ioerror(bp, -EIO);
+	xfs_buf_ioend(bp);
+}
+
 int
 xfs_bwrite(
 	struct xfs_buf		*bp)
@@ -1480,10 +1496,7 @@ __xfs_buf_submit(
 
 	/* on shutdown we stale and complete the buffer immediately */
 	if (XFS_FORCED_SHUTDOWN(bp->b_mount)) {
-		xfs_buf_ioerror(bp, -EIO);
-		bp->b_flags &= ~XBF_DONE;
-		xfs_buf_stale(bp);
-		xfs_buf_ioend(bp);
+		xfs_buf_ioend_fail(bp);
 		return -EIO;
 	}
 
fs/xfs/xfs_buf.h +1 -0
index 9a04c53c2488..06ea3eef866e 100644
@@ -263,6 +263,7 @@ extern void __xfs_buf_ioerror(struct xfs_buf *bp, int error,
 		xfs_failaddr_t failaddr);
 #define xfs_buf_ioerror(bp, err) __xfs_buf_ioerror((bp), (err), __this_address)
 extern void xfs_buf_ioerror_alert(struct xfs_buf *bp, xfs_failaddr_t fa);
+void xfs_buf_ioend_fail(struct xfs_buf *);
 
 extern int __xfs_buf_submit(struct xfs_buf *bp, bool);
 static inline int xfs_buf_submit(struct xfs_buf *bp)
fs/xfs/xfs_buf_item.c +3 -18
index 8796adde2d12..b452a399a441 100644
@@ -471,28 +471,13 @@ xfs_buf_item_unpin(
 		xfs_buf_relse(bp);
 	} else if (freed && remove) {
 		/*
-		 * There are currently two references to the buffer - the active
-		 * LRU reference and the buf log item. What we are about to do
-		 * here - simulate a failed IO completion - requires 3
-		 * references.
-		 *
-		 * The LRU reference is removed by the xfs_buf_stale() call. The
-		 * buf item reference is removed by the xfs_buf_iodone()
-		 * callback that is run by xfs_buf_do_callbacks() during ioend
-		 * processing (via the bp->b_iodone callback), and then finally
-		 * the ioend processing will drop the IO reference if the buffer
-		 * is marked XBF_ASYNC.
-		 *
-		 * Hence we need to take an additional reference here so that IO
-		 * completion processing doesn't free the buffer prematurely.
+		 * The buffer must be locked and held by the caller to simulate
+		 * an async I/O failure.
 		 */
 		xfs_buf_lock(bp);
 		xfs_buf_hold(bp);
 		bp->b_flags |= XBF_ASYNC;
-		xfs_buf_ioerror(bp, -EIO);
-		bp->b_flags &= ~XBF_DONE;
-		xfs_buf_stale(bp);
-		xfs_buf_ioend(bp);
+		xfs_buf_ioend_fail(bp);
 	}
 }
 
fs/xfs/xfs_inode.c +1 -5
index d1772786af29..909ca7c0bac4 100644
@@ -3630,11 +3630,7 @@ xfs_iflush_cluster(
 	 */
 	ASSERT(bp->b_iodone);
 	bp->b_flags |= XBF_ASYNC;
-	bp->b_flags &= ~XBF_DONE;
-	xfs_buf_stale(bp);
-	xfs_buf_ioerror(bp, -EIO);
-	xfs_buf_ioend(bp);
-
+	xfs_buf_ioend_fail(bp);
 	xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
 
 	/* abort the corrupt inode, as it was not attached to the buffer */
Signature · 1 line
2.21.1
#3 lore raw

PATCH v4 3/17 xfs: simplify inode flush error handling

In reply to Brian Foster

The inode flush code has several layers of error handling between the inode and cluster flushing code. If the inode flush fails before acquiring the backing buffer, the inode flush is aborted. If the cluster flush fails, the current inode flush is aborted and the cluster buffer is failed to handle the initial inode and any others that might have been attached before the error.

Since xfs_iflush() is the only caller of xfs_iflush_cluster(), the error handling between the two can be condensed in the top-level function. If we update xfs_iflush_int() to always fall through to the log item update and attach the item completion handler to the buffer, any errors that occur after the first call to xfs_iflush_int() can be handled with a buffer I/O failure.

Lift the error handling from xfs_iflush_cluster() into xfs_iflush() and consolidate with the existing error handling. This also replaces the need to release the buffer because failing the buffer with XBF_ASYNC drops the current reference.

---
 fs/xfs/xfs_inode.c | 117 +++++++++++++++++----------------------------
 1 file changed, 45 insertions(+), 72 deletions(-)
fs/xfs/xfs_inode.c +45 -72
index 909ca7c0bac4..84f2ee9957dc 100644
@@ -3496,6 +3496,7 @@ xfs_iflush_cluster(
 	struct xfs_inode	**cilist;
 	struct xfs_inode	*cip;
 	struct xfs_ino_geometry	*igeo = M_IGEO(mp);
+	int			error = 0;
 	int			nr_found;
 	int			clcount = 0;
 	int			i;
@@ -3588,11 +3589,10 @@ xfs_iflush_cluster(
 		 * re-check that it's dirty before flushing.
 		 */
 		if (!xfs_inode_clean(cip)) {
-			int	error;
 			error = xfs_iflush_int(cip, bp);
 			if (error) {
 				xfs_iunlock(cip, XFS_ILOCK_SHARED);
-				goto cluster_corrupt_out;
+				goto out_free;
 			}
 			clcount++;
 		} else {
@@ -3611,33 +3611,7 @@ xfs_iflush_cluster(
 	kmem_free(cilist);
 out_put:
 	xfs_perag_put(pag);
-	return 0;
-
-
-cluster_corrupt_out:
-	/*
-	 * Corruption detected in the clustering loop.  Invalidate the
-	 * inode buffer and shut down the filesystem.
-	 */
-	rcu_read_unlock();
-
-	/*
-	 * We'll always have an inode attached to the buffer for completion
-	 * process by the time we are called from xfs_iflush(). Hence we have
-	 * always need to do IO completion processing to abort the inodes
-	 * attached to the buffer.  handle them just like the shutdown case in
-	 * xfs_buf_submit().
-	 */
-	ASSERT(bp->b_iodone);
-	bp->b_flags |= XBF_ASYNC;
-	xfs_buf_ioend_fail(bp);
-	xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
-
-	/* abort the corrupt inode, as it was not attached to the buffer */
-	xfs_iflush_abort(cip, false);
-	kmem_free(cilist);
-	xfs_perag_put(pag);
-	return -EFSCORRUPTED;
+	return error;
 }
 
 /*
@@ -3693,17 +3667,16 @@ xfs_iflush(
 	 */
 	if (XFS_FORCED_SHUTDOWN(mp)) {
 		error = -EIO;
-		goto abort_out;
+		goto abort;
 	}
 
 	/*
 	 * Get the buffer containing the on-disk inode. We are doing a try-lock
-	 * operation here, so we may get  an EAGAIN error. In that case, we
-	 * simply want to return with the inode still dirty.
+	 * operation here, so we may get an EAGAIN error. In that case, return
+	 * leaving the inode dirty.
 	 *
 	 * If we get any other error, we effectively have a corruption situation
-	 * and we cannot flush the inode, so we treat it the same as failing
-	 * xfs_iflush_int().
+	 * and we cannot flush the inode. Abort the flush and shut down.
 	 */
 	error = xfs_imap_to_bp(mp, NULL, &ip->i_imap, &dip, &bp, XBF_TRYLOCK,
 			       0);
@@ -3712,14 +3685,7 @@ xfs_iflush(
 		return error;
 	}
 	if (error)
-		goto corrupt_out;
-
-	/*
-	 * First flush out the inode that xfs_iflush was called with.
-	 */
-	error = xfs_iflush_int(ip, bp);
-	if (error)
-		goto corrupt_out;
+		goto abort;
 
 	/*
 	 * If the buffer is pinned then push on the log now so we won't
@@ -3729,28 +3695,29 @@ xfs_iflush(
 		xfs_log_force(mp, 0);
 
 	/*
-	 * inode clustering: try to gather other inodes into this write
+	 * Flush the provided inode then attempt to gather others from the
+	 * cluster into the write.
 	 *
-	 * Note: Any error during clustering will result in the filesystem
-	 * being shut down and completion callbacks run on the cluster buffer.
-	 * As we have already flushed and attached this inode to the buffer,
-	 * it has already been aborted and released by xfs_iflush_cluster() and
-	 * so we have no further error handling to do here.
+	 * Note: Once we attempt to flush an inode, we must run buffer
+	 * completion callbacks on any failure. If this fails, simulate an I/O
+	 * failure on the buffer and shut down.
 	 */
-	error = xfs_iflush_cluster(ip, bp);
-	if (error)
-		return error;
+	error = xfs_iflush_int(ip, bp);
+	if (!error)
+		error = xfs_iflush_cluster(ip, bp);
+	if (error) {
+		bp->b_flags |= XBF_ASYNC;
+		xfs_buf_ioend_fail(bp);
+		goto shutdown;
+	}
 
 	*bpp = bp;
 	return 0;
 
-corrupt_out:
-	if (bp)
-		xfs_buf_relse(bp);
-	xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
-abort_out:
-	/* abort the corrupt inode, as it was not attached to the buffer */
+abort:
 	xfs_iflush_abort(ip, false);
+shutdown:
+	xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
 	return error;
 }
 
@@ -3792,6 +3759,7 @@ xfs_iflush_int(
 	struct xfs_inode_log_item *iip = ip->i_itemp;
 	struct xfs_dinode	*dip;
 	struct xfs_mount	*mp = ip->i_mount;
+	int			error;
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_ILOCK_SHARED));
 	ASSERT(xfs_isiflocked(ip));
@@ -3799,15 +3767,21 @@ xfs_iflush_int(
 	       ip->i_d.di_nextents > XFS_IFORK_MAXEXT(ip, XFS_DATA_FORK));
 	ASSERT(iip != NULL && iip->ili_fields != 0);
 
-	/* set *dip = inode's place in the buffer */
 	dip = xfs_buf_offset(bp, ip->i_imap.im_boffset);
 
+	/*
+	 * We don't flush the inode if any of the following checks fail, but we
+	 * do still update the log item and attach to the backing buffer as if
+	 * the flush happened. This is a formality to facilitate predictable
+	 * error handling as the caller will shutdown and fail the buffer.
+	 */
+	error = -EFSCORRUPTED;
 	if (XFS_TEST_ERROR(dip->di_magic != cpu_to_be16(XFS_DINODE_MAGIC),
 			       mp, XFS_ERRTAG_IFLUSH_1)) {
 		xfs_alert_tag(mp, XFS_PTAG_IFLUSH,
 			"%s: Bad inode %Lu magic number 0x%x, ptr "PTR_FMT,
 			__func__, ip->i_ino, be16_to_cpu(dip->di_magic), dip);
-		goto corrupt_out;
+		goto flush_out;
 	}
 	if (S_ISREG(VFS_I(ip)->i_mode)) {
 		if (XFS_TEST_ERROR(
@@ -3817,7 +3791,7 @@ xfs_iflush_int(
 			xfs_alert_tag(mp, XFS_PTAG_IFLUSH,
 				"%s: Bad regular inode %Lu, ptr "PTR_FMT,
 				__func__, ip->i_ino, ip);
-			goto corrupt_out;
+			goto flush_out;
 		}
 	} else if (S_ISDIR(VFS_I(ip)->i_mode)) {
 		if (XFS_TEST_ERROR(
@@ -3828,7 +3802,7 @@ xfs_iflush_int(
 			xfs_alert_tag(mp, XFS_PTAG_IFLUSH,
 				"%s: Bad directory inode %Lu, ptr "PTR_FMT,
 				__func__, ip->i_ino, ip);
-			goto corrupt_out;
+			goto flush_out;
 		}
 	}
 	if (XFS_TEST_ERROR(ip->i_d.di_nextents + ip->i_d.di_anextents >
@@ -3839,14 +3813,14 @@ xfs_iflush_int(
 			__func__, ip->i_ino,
 			ip->i_d.di_nextents + ip->i_d.di_anextents,
 			ip->i_d.di_nblocks, ip);
-		goto corrupt_out;
+		goto flush_out;
 	}
 	if (XFS_TEST_ERROR(ip->i_d.di_forkoff > mp->m_sb.sb_inodesize,
 				mp, XFS_ERRTAG_IFLUSH_6)) {
 		xfs_alert_tag(mp, XFS_PTAG_IFLUSH,
 			"%s: bad inode %Lu, forkoff 0x%x, ptr "PTR_FMT,
 			__func__, ip->i_ino, ip->i_d.di_forkoff, ip);
-		goto corrupt_out;
+		goto flush_out;
 	}
 
 	/*
@@ -3863,7 +3837,7 @@ xfs_iflush_int(
 
 	/* Check the inline fork data before we write out. */
 	if (!xfs_inode_verify_forks(ip))
-		goto corrupt_out;
+		goto flush_out;
 
 	/*
 	 * Copy the dirty parts of the inode into the on-disk inode.  We always
@@ -3906,6 +3880,8 @@ xfs_iflush_int(
 	 * need the AIL lock, because it is a 64 bit value that cannot be read
 	 * atomically.
 	 */
+	error = 0;
+flush_out:
 	iip->ili_last_fields = iip->ili_fields;
 	iip->ili_fields = 0;
 	iip->ili_fsync_fields = 0;
@@ -3915,10 +3891,10 @@ xfs_iflush_int(
 				&iip->ili_item.li_lsn);
 
 	/*
-	 * Attach the function xfs_iflush_done to the inode's
-	 * buffer.  This will remove the inode from the AIL
-	 * and unlock the inode's flush lock when the inode is
-	 * completely written to disk.
+	 * Attach the inode item callback to the buffer whether the flush
+	 * succeeded or not. If not, the caller will shut down and fail I/O
+	 * completion on the buffer to remove the inode from the AIL and release
+	 * the flush lock.
 	 */
 	xfs_buf_attach_iodone(bp, xfs_iflush_done, &iip->ili_item);
 
@@ -3927,10 +3903,7 @@ xfs_iflush_int(
 
 	ASSERT(!list_empty(&bp->b_li_list));
 	ASSERT(bp->b_iodone != NULL);
-	return 0;
-
-corrupt_out:
-	return -EFSCORRUPTED;
+	return error;
 }
 
 /* Release an inode. */
Signature · 1 line
2.21.1
Reviewed-by on v4 3/17
#4 lore raw

Re: [PATCH v4 03/17] xfs: simplify inode flush error handling

Quoted 14 lines · Brian Foster

The inode flush code has several layers of error handling between the inode and cluster flushing code. If the inode flush fails before acquiring the backing buffer, the inode flush is aborted. If the cluster flush fails, the current inode flush is aborted and the cluster buffer is failed to handle the initial inode and any others that might have been attached before the error.

Since xfs_iflush() is the only caller of xfs_iflush_cluster(), the error handling between the two can be condensed in the top-level function. If we update xfs_iflush_int() to always fall through to the log item update and attach the item completion handler to the buffer, any errors that occur after the first call to xfs_iflush_int() can be handled with a buffer I/O failure.

Quoted 7 lines

Lift the error handling from xfs_iflush_cluster() into xfs_iflush() and consolidate with the existing error handling. This also replaces the need to release the buffer because failing the buffer with XBF_ASYNC drops the current reference.

Seems fine to me,

--D

Quoted 262 lines
---
 fs/xfs/xfs_inode.c | 117 +++++++++++++++++----------------------------
 1 file changed, 45 insertions(+), 72 deletions(-)
fs/xfs/xfs_inode.c +45 -72
index 909ca7c0bac4..84f2ee9957dc 100644
@@ -3496,6 +3496,7 @@ xfs_iflush_cluster(
 	struct xfs_inode	**cilist;
 	struct xfs_inode	*cip;
 	struct xfs_ino_geometry	*igeo = M_IGEO(mp);
+	int			error = 0;
 	int			nr_found;
 	int			clcount = 0;
 	int			i;
@@ -3588,11 +3589,10 @@ xfs_iflush_cluster(
 		 * re-check that it's dirty before flushing.
 		 */
 		if (!xfs_inode_clean(cip)) {
-			int	error;
 			error = xfs_iflush_int(cip, bp);
 			if (error) {
 				xfs_iunlock(cip, XFS_ILOCK_SHARED);
-				goto cluster_corrupt_out;
+				goto out_free;
 			}
 			clcount++;
 		} else {
@@ -3611,33 +3611,7 @@ xfs_iflush_cluster(
 	kmem_free(cilist);
 out_put:
 	xfs_perag_put(pag);
-	return 0;
-
-
-cluster_corrupt_out:
-	/*
-	 * Corruption detected in the clustering loop.  Invalidate the
-	 * inode buffer and shut down the filesystem.
-	 */
-	rcu_read_unlock();
-
-	/*
-	 * We'll always have an inode attached to the buffer for completion
-	 * process by the time we are called from xfs_iflush(). Hence we have
-	 * always need to do IO completion processing to abort the inodes
-	 * attached to the buffer.  handle them just like the shutdown case in
-	 * xfs_buf_submit().
-	 */
-	ASSERT(bp->b_iodone);
-	bp->b_flags |= XBF_ASYNC;
-	xfs_buf_ioend_fail(bp);
-	xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
-
-	/* abort the corrupt inode, as it was not attached to the buffer */
-	xfs_iflush_abort(cip, false);
-	kmem_free(cilist);
-	xfs_perag_put(pag);
-	return -EFSCORRUPTED;
+	return error;
 }
 
 /*
@@ -3693,17 +3667,16 @@ xfs_iflush(
 	 */
 	if (XFS_FORCED_SHUTDOWN(mp)) {
 		error = -EIO;
-		goto abort_out;
+		goto abort;
 	}
 
 	/*
 	 * Get the buffer containing the on-disk inode. We are doing a try-lock
-	 * operation here, so we may get  an EAGAIN error. In that case, we
-	 * simply want to return with the inode still dirty.
+	 * operation here, so we may get an EAGAIN error. In that case, return
+	 * leaving the inode dirty.
 	 *
 	 * If we get any other error, we effectively have a corruption situation
-	 * and we cannot flush the inode, so we treat it the same as failing
-	 * xfs_iflush_int().
+	 * and we cannot flush the inode. Abort the flush and shut down.
 	 */
 	error = xfs_imap_to_bp(mp, NULL, &ip->i_imap, &dip, &bp, XBF_TRYLOCK,
 			       0);
@@ -3712,14 +3685,7 @@ xfs_iflush(
 		return error;
 	}
 	if (error)
-		goto corrupt_out;
-
-	/*
-	 * First flush out the inode that xfs_iflush was called with.
-	 */
-	error = xfs_iflush_int(ip, bp);
-	if (error)
-		goto corrupt_out;
+		goto abort;
 
 	/*
 	 * If the buffer is pinned then push on the log now so we won't
@@ -3729,28 +3695,29 @@ xfs_iflush(
 		xfs_log_force(mp, 0);
 
 	/*
-	 * inode clustering: try to gather other inodes into this write
+	 * Flush the provided inode then attempt to gather others from the
+	 * cluster into the write.
 	 *
-	 * Note: Any error during clustering will result in the filesystem
-	 * being shut down and completion callbacks run on the cluster buffer.
-	 * As we have already flushed and attached this inode to the buffer,
-	 * it has already been aborted and released by xfs_iflush_cluster() and
-	 * so we have no further error handling to do here.
+	 * Note: Once we attempt to flush an inode, we must run buffer
+	 * completion callbacks on any failure. If this fails, simulate an I/O
+	 * failure on the buffer and shut down.
 	 */
-	error = xfs_iflush_cluster(ip, bp);
-	if (error)
-		return error;
+	error = xfs_iflush_int(ip, bp);
+	if (!error)
+		error = xfs_iflush_cluster(ip, bp);
+	if (error) {
+		bp->b_flags |= XBF_ASYNC;
+		xfs_buf_ioend_fail(bp);
+		goto shutdown;
+	}
 
 	*bpp = bp;
 	return 0;
 
-corrupt_out:
-	if (bp)
-		xfs_buf_relse(bp);
-	xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
-abort_out:
-	/* abort the corrupt inode, as it was not attached to the buffer */
+abort:
 	xfs_iflush_abort(ip, false);
+shutdown:
+	xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
 	return error;
 }
 
@@ -3792,6 +3759,7 @@ xfs_iflush_int(
 	struct xfs_inode_log_item *iip = ip->i_itemp;
 	struct xfs_dinode	*dip;
 	struct xfs_mount	*mp = ip->i_mount;
+	int			error;
 
 	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_ILOCK_SHARED));
 	ASSERT(xfs_isiflocked(ip));
@@ -3799,15 +3767,21 @@ xfs_iflush_int(
 	       ip->i_d.di_nextents > XFS_IFORK_MAXEXT(ip, XFS_DATA_FORK));
 	ASSERT(iip != NULL && iip->ili_fields != 0);
 
-	/* set *dip = inode's place in the buffer */
 	dip = xfs_buf_offset(bp, ip->i_imap.im_boffset);
 
+	/*
+	 * We don't flush the inode if any of the following checks fail, but we
+	 * do still update the log item and attach to the backing buffer as if
+	 * the flush happened. This is a formality to facilitate predictable
+	 * error handling as the caller will shutdown and fail the buffer.
+	 */
+	error = -EFSCORRUPTED;
 	if (XFS_TEST_ERROR(dip->di_magic != cpu_to_be16(XFS_DINODE_MAGIC),
 			       mp, XFS_ERRTAG_IFLUSH_1)) {
 		xfs_alert_tag(mp, XFS_PTAG_IFLUSH,
 			"%s: Bad inode %Lu magic number 0x%x, ptr "PTR_FMT,
 			__func__, ip->i_ino, be16_to_cpu(dip->di_magic), dip);
-		goto corrupt_out;
+		goto flush_out;
 	}
 	if (S_ISREG(VFS_I(ip)->i_mode)) {
 		if (XFS_TEST_ERROR(
@@ -3817,7 +3791,7 @@ xfs_iflush_int(
 			xfs_alert_tag(mp, XFS_PTAG_IFLUSH,
 				"%s: Bad regular inode %Lu, ptr "PTR_FMT,
 				__func__, ip->i_ino, ip);
-			goto corrupt_out;
+			goto flush_out;
 		}
 	} else if (S_ISDIR(VFS_I(ip)->i_mode)) {
 		if (XFS_TEST_ERROR(
@@ -3828,7 +3802,7 @@ xfs_iflush_int(
 			xfs_alert_tag(mp, XFS_PTAG_IFLUSH,
 				"%s: Bad directory inode %Lu, ptr "PTR_FMT,
 				__func__, ip->i_ino, ip);
-			goto corrupt_out;
+			goto flush_out;
 		}
 	}
 	if (XFS_TEST_ERROR(ip->i_d.di_nextents + ip->i_d.di_anextents >
@@ -3839,14 +3813,14 @@ xfs_iflush_int(
 			__func__, ip->i_ino,
 			ip->i_d.di_nextents + ip->i_d.di_anextents,
 			ip->i_d.di_nblocks, ip);
-		goto corrupt_out;
+		goto flush_out;
 	}
 	if (XFS_TEST_ERROR(ip->i_d.di_forkoff > mp->m_sb.sb_inodesize,
 				mp, XFS_ERRTAG_IFLUSH_6)) {
 		xfs_alert_tag(mp, XFS_PTAG_IFLUSH,
 			"%s: bad inode %Lu, forkoff 0x%x, ptr "PTR_FMT,
 			__func__, ip->i_ino, ip->i_d.di_forkoff, ip);
-		goto corrupt_out;
+		goto flush_out;
 	}
 
 	/*
@@ -3863,7 +3837,7 @@ xfs_iflush_int(
 
 	/* Check the inline fork data before we write out. */
 	if (!xfs_inode_verify_forks(ip))
-		goto corrupt_out;
+		goto flush_out;
 
 	/*
 	 * Copy the dirty parts of the inode into the on-disk inode.  We always
@@ -3906,6 +3880,8 @@ xfs_iflush_int(
 	 * need the AIL lock, because it is a 64 bit value that cannot be read
 	 * atomically.
 	 */
+	error = 0;
+flush_out:
 	iip->ili_last_fields = iip->ili_fields;
 	iip->ili_fields = 0;
 	iip->ili_fsync_fields = 0;
@@ -3915,10 +3891,10 @@ xfs_iflush_int(
 				&iip->ili_item.li_lsn);
 
 	/*
-	 * Attach the function xfs_iflush_done to the inode's
-	 * buffer.  This will remove the inode from the AIL
-	 * and unlock the inode's flush lock when the inode is
-	 * completely written to disk.
+	 * Attach the inode item callback to the buffer whether the flush
+	 * succeeded or not. If not, the caller will shut down and fail I/O
+	 * completion on the buffer to remove the inode from the AIL and release
+	 * the flush lock.
 	 */
 	xfs_buf_attach_iodone(bp, xfs_iflush_done, &iip->ili_item);
 
@@ -3927,10 +3903,7 @@ xfs_iflush_int(
 
 	ASSERT(!list_empty(&bp->b_li_list));
 	ASSERT(bp->b_iodone != NULL);
-	return 0;
-
-corrupt_out:
-	return -EFSCORRUPTED;
+	return error;
 }
 
 /* Release an inode. */
Signature · 1 line
2.21.1
Reviewed-by on v4 3/17
#5 lore raw

Re: [PATCH v4 03/17] xfs: simplify inode flush error handling

In reply to Brian Foster
Quoted 14 lines · Brian Foster

The inode flush code has several layers of error handling between the inode and cluster flushing code. If the inode flush fails before acquiring the backing buffer, the inode flush is aborted. If the cluster flush fails, the current inode flush is aborted and the cluster buffer is failed to handle the initial inode and any others that might have been attached before the error.

Since xfs_iflush() is the only caller of xfs_iflush_cluster(), the error handling between the two can be condensed in the top-level function. If we update xfs_iflush_int() to always fall through to the log item update and attach the item completion handler to the buffer, any errors that occur after the first call to xfs_iflush_int() can be handled with a buffer I/O failure.

Quoted 7 lines

Lift the error handling from xfs_iflush_cluster() into xfs_iflush() and consolidate with the existing error handling. This also replaces the need to release the buffer because failing the buffer with XBF_ASYNC drops the current reference.

Ok, I think it looks good

Quoted 260 lines
---
  fs/xfs/xfs_inode.c | 117 +++++++++++++++++----------------------------
  1 file changed, 45 insertions(+), 72 deletions(-)
fs/xfs/xfs_inode.c +45 -72
index 909ca7c0bac4..84f2ee9957dc 100644
@@ -3496,6 +3496,7 @@ xfs_iflush_cluster(
  	struct xfs_inode	**cilist;
  	struct xfs_inode	*cip;
  	struct xfs_ino_geometry	*igeo = M_IGEO(mp);
+	int			error = 0;
  	int			nr_found;
  	int			clcount = 0;
  	int			i;
@@ -3588,11 +3589,10 @@ xfs_iflush_cluster(
  		 * re-check that it's dirty before flushing.
  		 */
  		if (!xfs_inode_clean(cip)) {
-			int	error;
  			error = xfs_iflush_int(cip, bp);
  			if (error) {
  				xfs_iunlock(cip, XFS_ILOCK_SHARED);
-				goto cluster_corrupt_out;
+				goto out_free;
  			}
  			clcount++;
  		} else {
@@ -3611,33 +3611,7 @@ xfs_iflush_cluster(
  	kmem_free(cilist);
  out_put:
  	xfs_perag_put(pag);
-	return 0;
-
-
-cluster_corrupt_out:
-	/*
-	 * Corruption detected in the clustering loop.  Invalidate the
-	 * inode buffer and shut down the filesystem.
-	 */
-	rcu_read_unlock();
-
-	/*
-	 * We'll always have an inode attached to the buffer for completion
-	 * process by the time we are called from xfs_iflush(). Hence we have
-	 * always need to do IO completion processing to abort the inodes
-	 * attached to the buffer.  handle them just like the shutdown case in
-	 * xfs_buf_submit().
-	 */
-	ASSERT(bp->b_iodone);
-	bp->b_flags |= XBF_ASYNC;
-	xfs_buf_ioend_fail(bp);
-	xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
-
-	/* abort the corrupt inode, as it was not attached to the buffer */
-	xfs_iflush_abort(cip, false);
-	kmem_free(cilist);
-	xfs_perag_put(pag);
-	return -EFSCORRUPTED;
+	return error;
  }
 
  /*
@@ -3693,17 +3667,16 @@ xfs_iflush(
  	 */
  	if (XFS_FORCED_SHUTDOWN(mp)) {
  		error = -EIO;
-		goto abort_out;
+		goto abort;
  	}
 
  	/*
  	 * Get the buffer containing the on-disk inode. We are doing a try-lock
-	 * operation here, so we may get  an EAGAIN error. In that case, we
-	 * simply want to return with the inode still dirty.
+	 * operation here, so we may get an EAGAIN error. In that case, return
+	 * leaving the inode dirty.
  	 *
  	 * If we get any other error, we effectively have a corruption situation
-	 * and we cannot flush the inode, so we treat it the same as failing
-	 * xfs_iflush_int().
+	 * and we cannot flush the inode. Abort the flush and shut down.
  	 */
  	error = xfs_imap_to_bp(mp, NULL, &ip->i_imap, &dip, &bp, XBF_TRYLOCK,
  			       0);
@@ -3712,14 +3685,7 @@ xfs_iflush(
  		return error;
  	}
  	if (error)
-		goto corrupt_out;
-
-	/*
-	 * First flush out the inode that xfs_iflush was called with.
-	 */
-	error = xfs_iflush_int(ip, bp);
-	if (error)
-		goto corrupt_out;
+		goto abort;
 
  	/*
  	 * If the buffer is pinned then push on the log now so we won't
@@ -3729,28 +3695,29 @@ xfs_iflush(
  		xfs_log_force(mp, 0);
 
  	/*
-	 * inode clustering: try to gather other inodes into this write
+	 * Flush the provided inode then attempt to gather others from the
+	 * cluster into the write.
  	 *
-	 * Note: Any error during clustering will result in the filesystem
-	 * being shut down and completion callbacks run on the cluster buffer.
-	 * As we have already flushed and attached this inode to the buffer,
-	 * it has already been aborted and released by xfs_iflush_cluster() and
-	 * so we have no further error handling to do here.
+	 * Note: Once we attempt to flush an inode, we must run buffer
+	 * completion callbacks on any failure. If this fails, simulate an I/O
+	 * failure on the buffer and shut down.
  	 */
-	error = xfs_iflush_cluster(ip, bp);
-	if (error)
-		return error;
+	error = xfs_iflush_int(ip, bp);
+	if (!error)
+		error = xfs_iflush_cluster(ip, bp);
+	if (error) {
+		bp->b_flags |= XBF_ASYNC;
+		xfs_buf_ioend_fail(bp);
+		goto shutdown;
+	}
 
  	*bpp = bp;
  	return 0;
 
-corrupt_out:
-	if (bp)
-		xfs_buf_relse(bp);
-	xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
-abort_out:
-	/* abort the corrupt inode, as it was not attached to the buffer */
+abort:
  	xfs_iflush_abort(ip, false);
+shutdown:
+	xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
  	return error;
  }
 
@@ -3792,6 +3759,7 @@ xfs_iflush_int(
  	struct xfs_inode_log_item *iip = ip->i_itemp;
  	struct xfs_dinode	*dip;
  	struct xfs_mount	*mp = ip->i_mount;
+	int			error;
 
  	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_ILOCK_SHARED));
  	ASSERT(xfs_isiflocked(ip));
@@ -3799,15 +3767,21 @@ xfs_iflush_int(
  	       ip->i_d.di_nextents > XFS_IFORK_MAXEXT(ip, XFS_DATA_FORK));
  	ASSERT(iip != NULL && iip->ili_fields != 0);
 
-	/* set *dip = inode's place in the buffer */
  	dip = xfs_buf_offset(bp, ip->i_imap.im_boffset);
 
+	/*
+	 * We don't flush the inode if any of the following checks fail, but we
+	 * do still update the log item and attach to the backing buffer as if
+	 * the flush happened. This is a formality to facilitate predictable
+	 * error handling as the caller will shutdown and fail the buffer.
+	 */
+	error = -EFSCORRUPTED;
  	if (XFS_TEST_ERROR(dip->di_magic != cpu_to_be16(XFS_DINODE_MAGIC),
  			       mp, XFS_ERRTAG_IFLUSH_1)) {
  		xfs_alert_tag(mp, XFS_PTAG_IFLUSH,
  			"%s: Bad inode %Lu magic number 0x%x, ptr "PTR_FMT,
  			__func__, ip->i_ino, be16_to_cpu(dip->di_magic), dip);
-		goto corrupt_out;
+		goto flush_out;
  	}
  	if (S_ISREG(VFS_I(ip)->i_mode)) {
  		if (XFS_TEST_ERROR(
@@ -3817,7 +3791,7 @@ xfs_iflush_int(
  			xfs_alert_tag(mp, XFS_PTAG_IFLUSH,
  				"%s: Bad regular inode %Lu, ptr "PTR_FMT,
  				__func__, ip->i_ino, ip);
-			goto corrupt_out;
+			goto flush_out;
  		}
  	} else if (S_ISDIR(VFS_I(ip)->i_mode)) {
  		if (XFS_TEST_ERROR(
@@ -3828,7 +3802,7 @@ xfs_iflush_int(
  			xfs_alert_tag(mp, XFS_PTAG_IFLUSH,
  				"%s: Bad directory inode %Lu, ptr "PTR_FMT,
  				__func__, ip->i_ino, ip);
-			goto corrupt_out;
+			goto flush_out;
  		}
  	}
  	if (XFS_TEST_ERROR(ip->i_d.di_nextents + ip->i_d.di_anextents >
@@ -3839,14 +3813,14 @@ xfs_iflush_int(
  			__func__, ip->i_ino,
  			ip->i_d.di_nextents + ip->i_d.di_anextents,
  			ip->i_d.di_nblocks, ip);
-		goto corrupt_out;
+		goto flush_out;
  	}
  	if (XFS_TEST_ERROR(ip->i_d.di_forkoff > mp->m_sb.sb_inodesize,
  				mp, XFS_ERRTAG_IFLUSH_6)) {
  		xfs_alert_tag(mp, XFS_PTAG_IFLUSH,
  			"%s: bad inode %Lu, forkoff 0x%x, ptr "PTR_FMT,
  			__func__, ip->i_ino, ip->i_d.di_forkoff, ip);
-		goto corrupt_out;
+		goto flush_out;
  	}
 
  	/*
@@ -3863,7 +3837,7 @@ xfs_iflush_int(
 
  	/* Check the inline fork data before we write out. */
  	if (!xfs_inode_verify_forks(ip))
-		goto corrupt_out;
+		goto flush_out;
 
  	/*
  	 * Copy the dirty parts of the inode into the on-disk inode.  We always
@@ -3906,6 +3880,8 @@ xfs_iflush_int(
  	 * need the AIL lock, because it is a 64 bit value that cannot be read
  	 * atomically.
  	 */
+	error = 0;
+flush_out:
  	iip->ili_last_fields = iip->ili_fields;
  	iip->ili_fields = 0;
  	iip->ili_fsync_fields = 0;
@@ -3915,10 +3891,10 @@ xfs_iflush_int(
  				&iip->ili_item.li_lsn);
 
  	/*
-	 * Attach the function xfs_iflush_done to the inode's
-	 * buffer.  This will remove the inode from the AIL
-	 * and unlock the inode's flush lock when the inode is
-	 * completely written to disk.
+	 * Attach the inode item callback to the buffer whether the flush
+	 * succeeded or not. If not, the caller will shut down and fail I/O
+	 * completion on the buffer to remove the inode from the AIL and release
+	 * the flush lock.
  	 */
  	xfs_buf_attach_iodone(bp, xfs_iflush_done, &iip->ili_item);
 
@@ -3927,10 +3903,7 @@ xfs_iflush_int(
 
  	ASSERT(!list_empty(&bp->b_li_list));
  	ASSERT(bp->b_iodone != NULL);
-	return 0;
-
-corrupt_out:
-	return -EFSCORRUPTED;
+	return error;
  }
 
  /* Release an inode. */
#6 lore raw

PATCH v4 4/17 xfs: remove unnecessary shutdown check from xfs_iflush()

In reply to Brian Foster

The shutdown check in xfs_iflush() duplicates checks down in the buffer code. If the fs is shut down, xfs_trans_read_buf_map() always returns an error and falls into the same error path. Remove the unnecessary check along with the warning in xfs_imap_to_bp() that generates excessive noise in the log if the fs is shut down.

---
 fs/xfs/libxfs/xfs_inode_buf.c |  7 +------
 fs/xfs/xfs_inode.c            | 13 -------------
 2 files changed, 1 insertion(+), 19 deletions(-)
fs/xfs/libxfs/xfs_inode_buf.c +1 -6
index 39c5a6e24915..b102e611bf54 100644
@@ -172,12 +172,7 @@ xfs_imap_to_bp(
 				   (int)imap->im_len, buf_flags, &bp,
 				   &xfs_inode_buf_ops);
 	if (error) {
-		if (error == -EAGAIN) {
-			ASSERT(buf_flags & XBF_TRYLOCK);
-			return error;
-		}
-		xfs_warn(mp, "%s: xfs_trans_read_buf() returned error %d.",
-			__func__, error);
+		ASSERT(error != -EAGAIN || (buf_flags & XBF_TRYLOCK));
 		return error;
 	}
 
fs/xfs/xfs_inode.c +0 -13
index 84f2ee9957dc..6fb3e26afa8b 100644
@@ -3657,19 +3657,6 @@ xfs_iflush(
 		return 0;
 	}
 
-	/*
-	 * This may have been unpinned because the filesystem is shutting
-	 * down forcibly. If that's the case we must not write this inode
-	 * to disk, because the log record didn't make it to disk.
-	 *
-	 * We also have to remove the log item from the AIL in this case,
-	 * as we wait for an empty AIL as part of the unmount process.
-	 */
-	if (XFS_FORCED_SHUTDOWN(mp)) {
-		error = -EIO;
-		goto abort;
-	}
-
 	/*
 	 * Get the buffer containing the on-disk inode. We are doing a try-lock
 	 * operation here, so we may get an EAGAIN error. In that case, return
Signature · 1 line
2.21.1
#7 lore raw

PATCH v4 5/17 xfs: reset buffer write failure state on successful completion

In reply to Brian Foster

The buffer write failure flag is intended to control the internal write retry that XFS has historically implemented to help mitigate the severity of transient I/O errors. The flag is set when a buffer is resubmitted from the I/O completion path due to a previous failure. It is checked on subsequent I/O completions to skip the internal retry and fall through to the higher level configurable error handling mechanism. The flag is cleared in the synchronous and delwri submission paths and also checked in various places to log write failure messages.

There are a couple minor problems with the current usage of this flag. One is that we issue an internal retry after every submission from xfsaild due to how delwri submission clears the flag. This results in double the expected or configured number of write attempts when under sustained failures. Another more subtle issue is that the flag is never cleared on successful I/O completion. This can cause xfs_wait_buftarg() to suggest that dirty buffers are being thrown away due to the existence of the flag, when the reality is that the flag might still be set because the write succeeded on the retry.

Clear the write failure flag on successful I/O completion to address both of these problems. This means that the internal retry attempt occurs once since the last time a buffer write failed and that various other contexts only see the flag set when the immediately previous write attempt has failed.

---
 fs/xfs/xfs_buf.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
fs/xfs/xfs_buf.c +5 -3
index d5d6a68bb1e6..fd76a84cefdd 100644
@@ -1197,8 +1197,10 @@ xfs_buf_ioend(
 		bp->b_ops->verify_read(bp);
 	}
 
-	if (!bp->b_error)
+	if (!bp->b_error) {
+		bp->b_flags &= ~XBF_WRITE_FAIL;
 		bp->b_flags |= XBF_DONE;
+	}
 
 	if (bp->b_iodone)
 		(*(bp->b_iodone))(bp);
@@ -1274,7 +1276,7 @@ xfs_bwrite(
 
 	bp->b_flags |= XBF_WRITE;
 	bp->b_flags &= ~(XBF_ASYNC | XBF_READ | _XBF_DELWRI_Q |
-			 XBF_WRITE_FAIL | XBF_DONE);
+			 XBF_DONE);
 
 	error = xfs_buf_submit(bp);
 	if (error)
@@ -1996,7 +1998,7 @@ xfs_buf_delwri_submit_buffers(
 		 * synchronously. Otherwise, drop the buffer from the delwri
 		 * queue and submit async.
 		 */
-		bp->b_flags &= ~(_XBF_DELWRI_Q | XBF_WRITE_FAIL);
+		bp->b_flags &= ~_XBF_DELWRI_Q;
 		bp->b_flags |= XBF_WRITE;
 		if (wait_list) {
 			bp->b_flags &= ~XBF_ASYNC;
Signature · 1 line
2.21.1
Reviewed-by on v4 5/17
#8 lore raw

Re: [PATCH v4 05/17] xfs: reset buffer write failure state on successful completion

Quoted 27 lines · Brian Foster

The buffer write failure flag is intended to control the internal write retry that XFS has historically implemented to help mitigate the severity of transient I/O errors. The flag is set when a buffer is resubmitted from the I/O completion path due to a previous failure. It is checked on subsequent I/O completions to skip the internal retry and fall through to the higher level configurable error handling mechanism. The flag is cleared in the synchronous and delwri submission paths and also checked in various places to log write failure messages.

There are a couple minor problems with the current usage of this flag. One is that we issue an internal retry after every submission from xfsaild due to how delwri submission clears the flag. This results in double the expected or configured number of write attempts when under sustained failures. Another more subtle issue is that the flag is never cleared on successful I/O completion. This can cause xfs_wait_buftarg() to suggest that dirty buffers are being thrown away due to the existence of the flag, when the reality is that the flag might still be set because the write succeeded on the retry.

Clear the write failure flag on successful I/O completion to address both of these problems. This means that the internal retry attempt occurs once since the last time a buffer write failed and that various other contexts only see the flag set when the immediately previous write attempt has failed.

Quoted 3 lines

Looks ok to me:

Quoted 39 lines
---
  fs/xfs/xfs_buf.c | 8 +++++---
  1 file changed, 5 insertions(+), 3 deletions(-)
fs/xfs/xfs_buf.c +5 -3
index d5d6a68bb1e6..fd76a84cefdd 100644
@@ -1197,8 +1197,10 @@ xfs_buf_ioend(
  		bp->b_ops->verify_read(bp);
  	}
 
-	if (!bp->b_error)
+	if (!bp->b_error) {
+		bp->b_flags &= ~XBF_WRITE_FAIL;
  		bp->b_flags |= XBF_DONE;
+	}
 
  	if (bp->b_iodone)
  		(*(bp->b_iodone))(bp);
@@ -1274,7 +1276,7 @@ xfs_bwrite(
 
  	bp->b_flags |= XBF_WRITE;
  	bp->b_flags &= ~(XBF_ASYNC | XBF_READ | _XBF_DELWRI_Q |
-			 XBF_WRITE_FAIL | XBF_DONE);
+			 XBF_DONE);
 
  	error = xfs_buf_submit(bp);
  	if (error)
@@ -1996,7 +1998,7 @@ xfs_buf_delwri_submit_buffers(
  		 * synchronously. Otherwise, drop the buffer from the delwri
  		 * queue and submit async.
  		 */
-		bp->b_flags &= ~(_XBF_DELWRI_Q | XBF_WRITE_FAIL);
+		bp->b_flags &= ~_XBF_DELWRI_Q;
  		bp->b_flags |= XBF_WRITE;
  		if (wait_list) {
  			bp->b_flags &= ~XBF_ASYNC;
Reviewed-by on v4 5/17
#9 lore raw

Re: [PATCH v4 05/17] xfs: reset buffer write failure state on successful completion

In reply to Brian Foster
Quoted 27 lines · Brian Foster

The buffer write failure flag is intended to control the internal write retry that XFS has historically implemented to help mitigate the severity of transient I/O errors. The flag is set when a buffer is resubmitted from the I/O completion path due to a previous failure. It is checked on subsequent I/O completions to skip the internal retry and fall through to the higher level configurable error handling mechanism. The flag is cleared in the synchronous and delwri submission paths and also checked in various places to log write failure messages.

There are a couple minor problems with the current usage of this flag. One is that we issue an internal retry after every submission from xfsaild due to how delwri submission clears the flag. This results in double the expected or configured number of write attempts when under sustained failures. Another more subtle issue is that the flag is never cleared on successful I/O completion. This can cause xfs_wait_buftarg() to suggest that dirty buffers are being thrown away due to the existence of the flag, when the reality is that the flag might still be set because the write succeeded on the retry.

Clear the write failure flag on successful I/O completion to address both of these problems. This means that the internal retry attempt occurs once since the last time a buffer write failed and that various other contexts only see the flag set when the immediately previous write attempt has failed.

Quoted 3 lines

Looks ok to me:

Quoted 39 lines
---
  fs/xfs/xfs_buf.c | 8 +++++---
  1 file changed, 5 insertions(+), 3 deletions(-)
fs/xfs/xfs_buf.c +5 -3
index d5d6a68bb1e6..fd76a84cefdd 100644
@@ -1197,8 +1197,10 @@ xfs_buf_ioend(
  		bp->b_ops->verify_read(bp);
  	}
 
-	if (!bp->b_error)
+	if (!bp->b_error) {
+		bp->b_flags &= ~XBF_WRITE_FAIL;
  		bp->b_flags |= XBF_DONE;
+	}
 
  	if (bp->b_iodone)
  		(*(bp->b_iodone))(bp);
@@ -1274,7 +1276,7 @@ xfs_bwrite(
 
  	bp->b_flags |= XBF_WRITE;
  	bp->b_flags &= ~(XBF_ASYNC | XBF_READ | _XBF_DELWRI_Q |
-			 XBF_WRITE_FAIL | XBF_DONE);
+			 XBF_DONE);
 
  	error = xfs_buf_submit(bp);
  	if (error)
@@ -1996,7 +1998,7 @@ xfs_buf_delwri_submit_buffers(
  		 * synchronously. Otherwise, drop the buffer from the delwri
  		 * queue and submit async.
  		 */
-		bp->b_flags &= ~(_XBF_DELWRI_Q | XBF_WRITE_FAIL);
+		bp->b_flags &= ~_XBF_DELWRI_Q;
  		bp->b_flags |= XBF_WRITE;
  		if (wait_list) {
  			bp->b_flags &= ~XBF_ASYNC;
#10 lore raw

PATCH v4 6/17 xfs: refactor ratelimited buffer error messages into helper

In reply to Brian Foster

XFS has some inconsistent log message rate limiting with respect to buffer alerts. The metadata I/O error notification uses the generic ratelimited alert, the buffer push code uses a custom rate limit and the similar quiesce time failure checks are not rate limited at all (when they should be).

The custom rate limit defined in the buf item code is specifically crafted for buffer alerts. It is more aggressive than generic rate limiting code because it must accommodate a high frequency of I/O error events in a relative short timeframe.

Factor out the custom rate limit state from the buf item code into a per-buftarg rate limit so various alerts are limited based on the target. Define a buffer alert helper function and use it for the buffer alerts that are already ratelimited.

---
 fs/xfs/xfs_buf.c      | 15 +++++++++++----
 fs/xfs/xfs_buf.h      |  1 +
 fs/xfs/xfs_buf_item.c | 17 ++++-------------
 fs/xfs/xfs_message.c  | 22 ++++++++++++++++++++++
 fs/xfs/xfs_message.h  |  3 +++
 5 files changed, 41 insertions(+), 17 deletions(-)
fs/xfs/xfs_buf.c +11 -4
index fd76a84cefdd..594d5e1df6f8 100644
@@ -1244,10 +1244,10 @@ xfs_buf_ioerror_alert(
 	struct xfs_buf		*bp,
 	xfs_failaddr_t		func)
 {
-	xfs_alert_ratelimited(bp->b_mount,
-"metadata I/O error in \"%pS\" at daddr 0x%llx len %d error %d",
-			func, (uint64_t)XFS_BUF_ADDR(bp), bp->b_length,
-			-bp->b_error);
+	xfs_buf_alert_ratelimited(bp, "XFS: metadata IO error",
+		"metadata I/O error in \"%pS\" at daddr 0x%llx len %d error %d",
+				  func, (uint64_t)XFS_BUF_ADDR(bp),
+				  bp->b_length, -bp->b_error);
 }
 
 /*
@@ -1828,6 +1828,13 @@ xfs_alloc_buftarg(
 	btp->bt_bdev = bdev;
 	btp->bt_daxdev = dax_dev;
 
+	/*
+	 * Buffer IO error rate limiting. Limit it to no more than 10 messages
+	 * per 30 seconds so as to not spam logs too much on repeated errors.
+	 */
+	ratelimit_state_init(&btp->bt_ioerror_rl, 30 * HZ,
+			     DEFAULT_RATELIMIT_BURST);
+
 	if (xfs_setsize_buftarg_early(btp, bdev))
 		goto error_free;
 
fs/xfs/xfs_buf.h +1 -0
index 06ea3eef866e..050c53b739e2 100644
@@ -91,6 +91,7 @@ typedef struct xfs_buftarg {
 	struct list_lru		bt_lru;
 
 	struct percpu_counter	bt_io_count;
+	struct ratelimit_state	bt_ioerror_rl;
 } xfs_buftarg_t;
 
 struct xfs_buf;
fs/xfs/xfs_buf_item.c +4 -13
index b452a399a441..1f7acffc99ba 100644
@@ -481,14 +481,6 @@ xfs_buf_item_unpin(
 	}
 }
 
-/*
- * Buffer IO error rate limiting. Limit it to no more than 10 messages per 30
- * seconds so as to not spam logs too much on repeated detection of the same
- * buffer being bad..
- */
-
-static DEFINE_RATELIMIT_STATE(xfs_buf_write_fail_rl_state, 30 * HZ, 10);
-
 STATIC uint
 xfs_buf_item_push(
 	struct xfs_log_item	*lip,
@@ -518,11 +510,10 @@ xfs_buf_item_push(
 	trace_xfs_buf_item_push(bip);
 
 	/* has a previous flush failed due to IO errors? */
-	if ((bp->b_flags & XBF_WRITE_FAIL) &&
-	    ___ratelimit(&xfs_buf_write_fail_rl_state, "XFS: Failing async write")) {
-		xfs_warn(bp->b_mount,
-"Failing async write on buffer block 0x%llx. Retrying async write.",
-			 (long long)bp->b_bn);
+	if (bp->b_flags & XBF_WRITE_FAIL) {
+		xfs_buf_alert_ratelimited(bp, "XFS: Failing async write",
+	    "Failing async write on buffer block 0x%llx. Retrying async write.",
+					  (long long)bp->b_bn);
 	}
 
 	if (!xfs_buf_delwri_queue(bp, buffer_list))
fs/xfs/xfs_message.c +22 -0
index e0f9d3b6abe9..bc66d95c8d4c 100644
@@ -117,3 +117,25 @@ xfs_hex_dump(const void *p, int length)
 {
 	print_hex_dump(KERN_ALERT, "", DUMP_PREFIX_OFFSET, 16, 1, p, length, 1);
 }
+
+void
+xfs_buf_alert_ratelimited(
+	struct xfs_buf		*bp,
+	const char		*rlmsg,
+	const char		*fmt,
+	...)
+{
+	struct xfs_mount	*mp = bp->b_mount;
+	struct va_format	vaf;
+	va_list			args;
+
+	/* use the more aggressive per-target rate limit for buffers */
+	if (!___ratelimit(&bp->b_target->bt_ioerror_rl, rlmsg))
+		return;
+
+	va_start(args, fmt);
+	vaf.fmt = fmt;
+	vaf.va = &args;
+	__xfs_printk(KERN_ALERT, mp, &vaf);
+	va_end(args);
+}
fs/xfs/xfs_message.h +3 -0
index 0b05e10995a0..6be2ebe3a7b9 100644
@@ -62,4 +62,7 @@ void asswarn(struct xfs_mount *mp, char *expr, char *f, int l);
 
 extern void xfs_hex_dump(const void *p, int length);
 
+void xfs_buf_alert_ratelimited(struct xfs_buf *bp, const char *rlmsg,
+			       const char *fmt, ...);
+
 #endif	/* __XFS_MESSAGE_H */
Signature · 1 line
2.21.1
Reviewed-by on v4 6/17
#11 lore raw

Re: [PATCH v4 06/17] xfs: refactor ratelimited buffer error messages into helper

Quoted 11 lines · Brian Foster

XFS has some inconsistent log message rate limiting with respect to buffer alerts. The metadata I/O error notification uses the generic ratelimited alert, the buffer push code uses a custom rate limit and the similar quiesce time failure checks are not rate limited at all (when they should be).

The custom rate limit defined in the buf item code is specifically crafted for buffer alerts. It is more aggressive than generic rate limiting code because it must accommodate a high frequency of I/O error events in a relative short timeframe.

Quoted 8 lines

Factor out the custom rate limit state from the buf item code into a per-buftarg rate limit so various alerts are limited based on the target. Define a buffer alert helper function and use it for the buffer alerts that are already ratelimited.

Alrighty, make sense

Quoted 131 lines
---
  fs/xfs/xfs_buf.c      | 15 +++++++++++----
  fs/xfs/xfs_buf.h      |  1 +
  fs/xfs/xfs_buf_item.c | 17 ++++-------------
  fs/xfs/xfs_message.c  | 22 ++++++++++++++++++++++
  fs/xfs/xfs_message.h  |  3 +++
  5 files changed, 41 insertions(+), 17 deletions(-)
fs/xfs/xfs_buf.c +11 -4
index fd76a84cefdd..594d5e1df6f8 100644
@@ -1244,10 +1244,10 @@ xfs_buf_ioerror_alert(
  	struct xfs_buf		*bp,
  	xfs_failaddr_t		func)
  {
-	xfs_alert_ratelimited(bp->b_mount,
-"metadata I/O error in \"%pS\" at daddr 0x%llx len %d error %d",
-			func, (uint64_t)XFS_BUF_ADDR(bp), bp->b_length,
-			-bp->b_error);
+	xfs_buf_alert_ratelimited(bp, "XFS: metadata IO error",
+		"metadata I/O error in \"%pS\" at daddr 0x%llx len %d error %d",
+				  func, (uint64_t)XFS_BUF_ADDR(bp),
+				  bp->b_length, -bp->b_error);
  }
 
  /*
@@ -1828,6 +1828,13 @@ xfs_alloc_buftarg(
  	btp->bt_bdev = bdev;
  	btp->bt_daxdev = dax_dev;
 
+	/*
+	 * Buffer IO error rate limiting. Limit it to no more than 10 messages
+	 * per 30 seconds so as to not spam logs too much on repeated errors.
+	 */
+	ratelimit_state_init(&btp->bt_ioerror_rl, 30 * HZ,
+			     DEFAULT_RATELIMIT_BURST);
+
  	if (xfs_setsize_buftarg_early(btp, bdev))
  		goto error_free;
 
fs/xfs/xfs_buf.h +1 -0
index 06ea3eef866e..050c53b739e2 100644
@@ -91,6 +91,7 @@ typedef struct xfs_buftarg {
  	struct list_lru		bt_lru;
 
  	struct percpu_counter	bt_io_count;
+	struct ratelimit_state	bt_ioerror_rl;
  } xfs_buftarg_t;
 
  struct xfs_buf;
fs/xfs/xfs_buf_item.c +4 -13
index b452a399a441..1f7acffc99ba 100644
@@ -481,14 +481,6 @@ xfs_buf_item_unpin(
  	}
  }
 
-/*
- * Buffer IO error rate limiting. Limit it to no more than 10 messages per 30
- * seconds so as to not spam logs too much on repeated detection of the same
- * buffer being bad..
- */
-
-static DEFINE_RATELIMIT_STATE(xfs_buf_write_fail_rl_state, 30 * HZ, 10);
-
  STATIC uint
  xfs_buf_item_push(
  	struct xfs_log_item	*lip,
@@ -518,11 +510,10 @@ xfs_buf_item_push(
  	trace_xfs_buf_item_push(bip);
 
  	/* has a previous flush failed due to IO errors? */
-	if ((bp->b_flags & XBF_WRITE_FAIL) &&
-	    ___ratelimit(&xfs_buf_write_fail_rl_state, "XFS: Failing async write")) {
-		xfs_warn(bp->b_mount,
-"Failing async write on buffer block 0x%llx. Retrying async write.",
-			 (long long)bp->b_bn);
+	if (bp->b_flags & XBF_WRITE_FAIL) {
+		xfs_buf_alert_ratelimited(bp, "XFS: Failing async write",
+	    "Failing async write on buffer block 0x%llx. Retrying async write.",
+					  (long long)bp->b_bn);
  	}
 
  	if (!xfs_buf_delwri_queue(bp, buffer_list))
fs/xfs/xfs_message.c +22 -0
index e0f9d3b6abe9..bc66d95c8d4c 100644
@@ -117,3 +117,25 @@ xfs_hex_dump(const void *p, int length)
  {
  	print_hex_dump(KERN_ALERT, "", DUMP_PREFIX_OFFSET, 16, 1, p, length, 1);
  }
+
+void
+xfs_buf_alert_ratelimited(
+	struct xfs_buf		*bp,
+	const char		*rlmsg,
+	const char		*fmt,
+	...)
+{
+	struct xfs_mount	*mp = bp->b_mount;
+	struct va_format	vaf;
+	va_list			args;
+
+	/* use the more aggressive per-target rate limit for buffers */
+	if (!___ratelimit(&bp->b_target->bt_ioerror_rl, rlmsg))
+		return;
+
+	va_start(args, fmt);
+	vaf.fmt = fmt;
+	vaf.va = &args;
+	__xfs_printk(KERN_ALERT, mp, &vaf);
+	va_end(args);
+}
fs/xfs/xfs_message.h +3 -0
index 0b05e10995a0..6be2ebe3a7b9 100644
@@ -62,4 +62,7 @@ void asswarn(struct xfs_mount *mp, char *expr, char *f, int l);
 
  extern void xfs_hex_dump(const void *p, int length);
 
+void xfs_buf_alert_ratelimited(struct xfs_buf *bp, const char *rlmsg,
+			       const char *fmt, ...);
+
  #endif	/* __XFS_MESSAGE_H */
#12 lore raw

PATCH v4 7/17 xfs: ratelimit unmount time per-buffer I/O error alert

In reply to Brian Foster

At unmount time, XFS emits an alert for every in-core buffer that might have undergone a write error. In practice this behavior is probably reasonable given that the filesystem is likely short lived once I/O errors begin to occur consistently. Under certain test or otherwise expected error conditions, this can spam the logs and slow down the unmount.

Now that we have a ratelimit mechanism specifically for buffer alerts, reuse it for the per-buffer alerts in xfs_wait_buftarg(). Also lift the final repair message out of the loop so it always prints and assert that the metadata error handling code has shut down the fs.

---
 fs/xfs/xfs_buf.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)
fs/xfs/xfs_buf.c +11 -4
index 594d5e1df6f8..8f0f605de579 100644
@@ -1657,7 +1657,8 @@ xfs_wait_buftarg(
 	struct xfs_buftarg	*btp)
 {
 	LIST_HEAD(dispose);
-	int loop = 0;
+	int			loop = 0;
+	bool			write_fail = false;
 
 	/*
 	 * First wait on the buftarg I/O count for all in-flight buffers to be
@@ -1685,17 +1686,23 @@ xfs_wait_buftarg(
 			bp = list_first_entry(&dispose, struct xfs_buf, b_lru);
 			list_del_init(&bp->b_lru);
 			if (bp->b_flags & XBF_WRITE_FAIL) {
-				xfs_alert(btp->bt_mount,
+				write_fail = true;
+				xfs_buf_alert_ratelimited(bp,
+					"XFS: Corruption Alert",
 "Corruption Alert: Buffer at daddr 0x%llx had permanent write failures!",
 					(long long)bp->b_bn);
-				xfs_alert(btp->bt_mount,
-"Please run xfs_repair to determine the extent of the problem.");
 			}
 			xfs_buf_rele(bp);
 		}
 		if (loop++ != 0)
 			delay(100);
 	}
+
+	if (write_fail) {
+		ASSERT(XFS_FORCED_SHUTDOWN(btp->bt_mount));
+		xfs_alert(btp->bt_mount,
+	      "Please run xfs_repair to determine the extent of the problem.");
+	}
 }
 
 static enum lru_status
Signature · 1 line
2.21.1
Reviewed-by on v4 7/17
#13 lore raw

Re: [PATCH v4 07/17] xfs: ratelimit unmount time per-buffer I/O error alert

Quoted 13 lines · Brian Foster

At unmount time, XFS emits an alert for every in-core buffer that might have undergone a write error. In practice this behavior is probably reasonable given that the filesystem is likely short lived once I/O errors begin to occur consistently. Under certain test or otherwise expected error conditions, this can spam the logs and slow down the unmount.

Now that we have a ratelimit mechanism specifically for buffer alerts, reuse it for the per-buffer alerts in xfs_wait_buftarg(). Also lift the final repair message out of the loop so it always prints and assert that the metadata error handling code has shut down the fs.

Quoted 3 lines

Looks fine to me:

Quoted 46 lines
---
  fs/xfs/xfs_buf.c | 15 +++++++++++----
  1 file changed, 11 insertions(+), 4 deletions(-)
fs/xfs/xfs_buf.c +11 -4
index 594d5e1df6f8..8f0f605de579 100644
@@ -1657,7 +1657,8 @@ xfs_wait_buftarg(
  	struct xfs_buftarg	*btp)
  {
  	LIST_HEAD(dispose);
-	int loop = 0;
+	int			loop = 0;
+	bool			write_fail = false;
 
  	/*
  	 * First wait on the buftarg I/O count for all in-flight buffers to be
@@ -1685,17 +1686,23 @@ xfs_wait_buftarg(
  			bp = list_first_entry(&dispose, struct xfs_buf, b_lru);
  			list_del_init(&bp->b_lru);
  			if (bp->b_flags & XBF_WRITE_FAIL) {
-				xfs_alert(btp->bt_mount,
+				write_fail = true;
+				xfs_buf_alert_ratelimited(bp,
+					"XFS: Corruption Alert",
  "Corruption Alert: Buffer at daddr 0x%llx had permanent write failures!",
  					(long long)bp->b_bn);
-				xfs_alert(btp->bt_mount,
-"Please run xfs_repair to determine the extent of the problem.");
  			}
  			xfs_buf_rele(bp);
  		}
  		if (loop++ != 0)
  			delay(100);
  	}
+
+	if (write_fail) {
+		ASSERT(XFS_FORCED_SHUTDOWN(btp->bt_mount));
+		xfs_alert(btp->bt_mount,
+	      "Please run xfs_repair to determine the extent of the problem.");
+	}
  }
 
  static enum lru_status
#14 lore raw

PATCH v4 7/17 xfs: ratelimit unmount time per-buffer I/O error alert

In reply to Brian Foster

At unmount time, XFS emits an alert for every in-core buffer that might have undergone a write error. In practice this behavior is probably reasonable given that the filesystem is likely short lived once I/O errors begin to occur consistently. Under certain test or otherwise expected error conditions, this can spam the logs and slow down the unmount.

Now that we have a ratelimit mechanism specifically for buffer alerts, reuse it for the per-buffer alerts in xfs_wait_buftarg(). Also lift the final repair message out of the loop so it always prints and assert that the metadata error handling code has shut down the fs.

---

v4.1:
- Add comment to document dependency on external permanent error processing.

 fs/xfs/xfs_buf.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)
fs/xfs/xfs_buf.c +17 -4
index 594d5e1df6f8..3918270f4eab 100644
@@ -1657,7 +1657,8 @@ xfs_wait_buftarg(
 	struct xfs_buftarg	*btp)
 {
 	LIST_HEAD(dispose);
-	int loop = 0;
+	int			loop = 0;
+	bool			write_fail = false;
 
 	/*
 	 * First wait on the buftarg I/O count for all in-flight buffers to be
@@ -1685,17 +1686,29 @@ xfs_wait_buftarg(
 			bp = list_first_entry(&dispose, struct xfs_buf, b_lru);
 			list_del_init(&bp->b_lru);
 			if (bp->b_flags & XBF_WRITE_FAIL) {
-				xfs_alert(btp->bt_mount,
+				write_fail = true;
+				xfs_buf_alert_ratelimited(bp,
+					"XFS: Corruption Alert",
 "Corruption Alert: Buffer at daddr 0x%llx had permanent write failures!",
 					(long long)bp->b_bn);
-				xfs_alert(btp->bt_mount,
-"Please run xfs_repair to determine the extent of the problem.");
 			}
 			xfs_buf_rele(bp);
 		}
 		if (loop++ != 0)
 			delay(100);
 	}
+
+	/*
+	 * If one or more failed buffers were freed, that means dirty metadata
+	 * was thrown away. This should only ever happen after I/O completion
+	 * handling has elevated I/O error(s) to permanent failures and shuts
+	 * down the fs.
+	 */
+	if (write_fail) {
+		ASSERT(XFS_FORCED_SHUTDOWN(btp->bt_mount));
+		xfs_alert(btp->bt_mount,
+	      "Please run xfs_repair to determine the extent of the problem.");
+	}
 }
 
 static enum lru_status
Signature · 1 line
2.21.1
Reviewed-by on v4 7/17
#15 lore raw

Re: [PATCH v4.1 07/17] xfs: ratelimit unmount time per-buffer I/O error alert

Quoted 17 lines · Brian Foster

At unmount time, XFS emits an alert for every in-core buffer that might have undergone a write error. In practice this behavior is probably reasonable given that the filesystem is likely short lived once I/O errors begin to occur consistently. Under certain test or otherwise expected error conditions, this can spam the logs and slow down the unmount.

Now that we have a ratelimit mechanism specifically for buffer alerts, reuse it for the per-buffer alerts in xfs_wait_buftarg(). Also lift the final repair message out of the loop so it always prints and assert that the metadata error handling code has shut down the fs.

Quoted 5 lines

---

v4.1:
- Add comment to document dependency on external permanent error processing.

Looks good now. Thanks!

Signature · 2 lines
Dave Chinner
[email protected]
#16 lore raw

PATCH v4 8/17 xfs: fix duplicate verification from xfs_qm_dqflush()

In reply to Brian Foster

The pre-flush dquot verification in xfs_qm_dqflush() duplicates the read verifier by checking the dquot in the on-disk buffer. Instead, verify the in-core variant before it is flushed to the buffer.

Fixes 7224fa482a6d ("xfs: add full xfs_dqblk verifier")
---
 fs/xfs/xfs_dquot.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
fs/xfs/xfs_dquot.c +4 -5
index af2c8e5ceea0..265feb62290d 100644
@@ -1116,13 +1116,12 @@ xfs_qm_dqflush(
 	dqb = bp->b_addr + dqp->q_bufoffset;
 	ddqp = &dqb->dd_diskdq;
 
-	/*
-	 * A simple sanity check in case we got a corrupted dquot.
-	 */
-	fa = xfs_dqblk_verify(mp, dqb, be32_to_cpu(ddqp->d_id), 0);
+	/* sanity check the in-core structure before we flush */
+	fa = xfs_dquot_verify(mp, &dqp->q_core, be32_to_cpu(dqp->q_core.d_id),
+			      0);
 	if (fa) {
 		xfs_alert(mp, "corrupt dquot ID 0x%x in memory at %pS",
-				be32_to_cpu(ddqp->d_id), fa);
+				be32_to_cpu(dqp->q_core.d_id), fa);
 		xfs_buf_relse(bp);
 		xfs_dqfunlock(dqp);
 		xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
Signature · 1 line
2.21.1
Reviewed-by on v4 8/17
#17 lore raw

Re: [PATCH v4 08/17] xfs: fix duplicate verification from xfs_qm_dqflush()

Quoted 9 lines · Brian Foster

The pre-flush dquot verification in xfs_qm_dqflush() duplicates the read verifier by checking the dquot in the on-disk buffer. Instead, verify the in-core variant before it is flushed to the buffer.

Fixes 7224fa482a6d ("xfs: add full xfs_dqblk verifier")

Ok, looks good:

Quoted 27 lines
---
  fs/xfs/xfs_dquot.c | 9 ++++-----
  1 file changed, 4 insertions(+), 5 deletions(-)
fs/xfs/xfs_dquot.c +4 -5
index af2c8e5ceea0..265feb62290d 100644
@@ -1116,13 +1116,12 @@ xfs_qm_dqflush(
  	dqb = bp->b_addr + dqp->q_bufoffset;
  	ddqp = &dqb->dd_diskdq;
 
-	/*
-	 * A simple sanity check in case we got a corrupted dquot.
-	 */
-	fa = xfs_dqblk_verify(mp, dqb, be32_to_cpu(ddqp->d_id), 0);
+	/* sanity check the in-core structure before we flush */
+	fa = xfs_dquot_verify(mp, &dqp->q_core, be32_to_cpu(dqp->q_core.d_id),
+			      0);
  	if (fa) {
  		xfs_alert(mp, "corrupt dquot ID 0x%x in memory at %pS",
-				be32_to_cpu(ddqp->d_id), fa);
+				be32_to_cpu(dqp->q_core.d_id), fa);
  		xfs_buf_relse(bp);
  		xfs_dqfunlock(dqp);
  		xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
#18 lore raw

PATCH v4 9/17 xfs: abort consistently on dquot flush failure

In reply to Brian Foster

The dquot flush handler effectively aborts the dquot flush if the filesystem is already shut down, but doesn't actually shut down if the flush fails. Update xfs_qm_dqflush() to consistently abort the dquot flush and shutdown the fs if the flush fails with an unexpected error.

---
 fs/xfs/xfs_dquot.c | 32 ++++++++++----------------------
 1 file changed, 10 insertions(+), 22 deletions(-)
fs/xfs/xfs_dquot.c +10 -22
index 265feb62290d..ffe607733c50 100644
@@ -1068,6 +1068,7 @@ xfs_qm_dqflush(
 	struct xfs_buf		**bpp)
 {
 	struct xfs_mount	*mp = dqp->q_mount;
+	struct xfs_log_item	*lip = &dqp->q_logitem.qli_item;
 	struct xfs_buf		*bp;
 	struct xfs_dqblk	*dqb;
 	struct xfs_disk_dquot	*ddqp;
@@ -1083,32 +1084,16 @@ xfs_qm_dqflush(
 
 	xfs_qm_dqunpin_wait(dqp);
 
-	/*
-	 * This may have been unpinned because the filesystem is shutting
-	 * down forcibly. If that's the case we must not write this dquot
-	 * to disk, because the log record didn't make it to disk.
-	 *
-	 * We also have to remove the log item from the AIL in this case,
-	 * as we wait for an emptry AIL as part of the unmount process.
-	 */
-	if (XFS_FORCED_SHUTDOWN(mp)) {
-		struct xfs_log_item	*lip = &dqp->q_logitem.qli_item;
-		dqp->dq_flags &= ~XFS_DQ_DIRTY;
-
-		xfs_trans_ail_remove(lip, SHUTDOWN_CORRUPT_INCORE);
-
-		error = -EIO;
-		goto out_unlock;
-	}
-
 	/*
 	 * Get the buffer containing the on-disk dquot
 	 */
 	error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp, dqp->q_blkno,
 				   mp->m_quotainfo->qi_dqchunklen, XBF_TRYLOCK,
 				   &bp, &xfs_dquot_buf_ops);
-	if (error)
+	if (error == -EAGAIN)
 		goto out_unlock;
+	if (error)
+		goto out_abort;
 
 	/*
 	 * Calculate the location of the dquot inside the buffer.
@@ -1123,9 +1108,8 @@ xfs_qm_dqflush(
 		xfs_alert(mp, "corrupt dquot ID 0x%x in memory at %pS",
 				be32_to_cpu(dqp->q_core.d_id), fa);
 		xfs_buf_relse(bp);
-		xfs_dqfunlock(dqp);
-		xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
-		return -EFSCORRUPTED;
+		error = -EFSCORRUPTED;
+		goto out_abort;
 	}
 
 	/* This is the only portion of data that needs to persist */
@@ -1174,6 +1158,10 @@ xfs_qm_dqflush(
 	*bpp = bp;
 	return 0;
 
+out_abort:
+	dqp->dq_flags &= ~XFS_DQ_DIRTY;
+	xfs_trans_ail_remove(lip, SHUTDOWN_CORRUPT_INCORE);
+	xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
 out_unlock:
 	xfs_dqfunlock(dqp);
 	return error;
Signature · 1 line
2.21.1
#19 lore raw

PATCH v4 10/17 xfs: acquire ->ail_lock from xfs_trans_ail_delete()

In reply to Brian Foster

Several callers acquire the lock just prior to the call. Callers that require ->ail_lock for other purposes already check IN_AIL state and thus don't require the additional shutdown check in the helper. Push the lock down into xfs_trans_ail_delete(), open code the instances that still acquire it, and remove the unnecessary ailp parameter.

---
 fs/xfs/xfs_buf_item.c   | 27 +++++++++++----------------
 fs/xfs/xfs_dquot.c      |  6 ++++--
 fs/xfs/xfs_trans_ail.c  |  3 ++-
 fs/xfs/xfs_trans_priv.h | 14 ++++++++------
 4 files changed, 25 insertions(+), 25 deletions(-)
fs/xfs/xfs_buf_item.c +11 -16
index 1f7acffc99ba..06e306b49283 100644
@@ -410,7 +410,6 @@ xfs_buf_item_unpin(
 {
 	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
 	xfs_buf_t		*bp = bip->bli_buf;
-	struct xfs_ail		*ailp = lip->li_ailp;
 	int			stale = bip->bli_flags & XFS_BLI_STALE;
 	int			freed;
 
@@ -452,10 +451,10 @@ xfs_buf_item_unpin(
 		}
 
 		/*
-		 * If we get called here because of an IO error, we may
-		 * or may not have the item on the AIL. xfs_trans_ail_delete()
-		 * will take care of that situation.
-		 * xfs_trans_ail_delete() drops the AIL lock.
+		 * If we get called here because of an IO error, we may or may
+		 * not have the item on the AIL. xfs_trans_ail_delete() will
+		 * take care of that situation. xfs_trans_ail_delete() drops
+		 * the AIL lock.
 		 */
 		if (bip->bli_flags & XFS_BLI_STALE_INODE) {
 			xfs_buf_do_callbacks(bp);
@@ -463,8 +462,7 @@ xfs_buf_item_unpin(
 			list_del_init(&bp->b_li_list);
 			bp->b_iodone = NULL;
 		} else {
-			spin_lock(&ailp->ail_lock);
-			xfs_trans_ail_delete(ailp, lip, SHUTDOWN_LOG_IO_ERROR);
+			xfs_trans_ail_delete(lip, SHUTDOWN_LOG_IO_ERROR);
 			xfs_buf_item_relse(bp);
 			ASSERT(bp->b_log_item == NULL);
 		}
@@ -1205,22 +1203,19 @@ xfs_buf_iodone(
 	struct xfs_buf		*bp,
 	struct xfs_log_item	*lip)
 {
-	struct xfs_ail		*ailp = lip->li_ailp;
-
 	ASSERT(BUF_ITEM(lip)->bli_buf == bp);
 
 	xfs_buf_rele(bp);
 
 	/*
-	 * If we are forcibly shutting down, this may well be
-	 * off the AIL already. That's because we simulate the
-	 * log-committed callbacks to unpin these buffers. Or we may never
-	 * have put this item on AIL because of the transaction was
-	 * aborted forcibly. xfs_trans_ail_delete() takes care of these.
+	 * If we are forcibly shutting down, this may well be off the AIL
+	 * already. That's because we simulate the log-committed callbacks to
+	 * unpin these buffers. Or we may never have put this item on AIL
+	 * because of the transaction was aborted forcibly.
+	 * xfs_trans_ail_delete() takes care of these.
 	 *
 	 * Either way, AIL is useless if we're forcing a shutdown.
 	 */
-	spin_lock(&ailp->ail_lock);
-	xfs_trans_ail_delete(ailp, lip, SHUTDOWN_CORRUPT_INCORE);
+	xfs_trans_ail_delete(lip, SHUTDOWN_CORRUPT_INCORE);
 	xfs_buf_item_free(BUF_ITEM(lip));
 }
fs/xfs/xfs_dquot.c +4 -2
index ffe607733c50..5fb65f43b980 100644
@@ -1021,6 +1021,7 @@ xfs_qm_dqflush_done(
 	struct xfs_dq_logitem	*qip = (struct xfs_dq_logitem *)lip;
 	struct xfs_dquot	*dqp = qip->qli_dquot;
 	struct xfs_ail		*ailp = lip->li_ailp;
+	xfs_lsn_t		tail_lsn;
 
 	/*
 	 * We only want to pull the item from the AIL if its
@@ -1034,10 +1035,11 @@ xfs_qm_dqflush_done(
 	    ((lip->li_lsn == qip->qli_flush_lsn) ||
 	     test_bit(XFS_LI_FAILED, &lip->li_flags))) {
 
-		/* xfs_trans_ail_delete() drops the AIL lock. */
 		spin_lock(&ailp->ail_lock);
 		if (lip->li_lsn == qip->qli_flush_lsn) {
-			xfs_trans_ail_delete(ailp, lip, SHUTDOWN_CORRUPT_INCORE);
+			/* xfs_ail_update_finish() drops the AIL lock */
+			tail_lsn = xfs_ail_delete_one(ailp, lip);
+			xfs_ail_update_finish(ailp, tail_lsn);
 		} else {
 			/*
 			 * Clear the failed state since we are about to drop the
fs/xfs/xfs_trans_ail.c +2 -1
index 2574d01e4a83..cfba691664c7 100644
@@ -864,13 +864,14 @@ xfs_ail_delete_one(
  */
 void
 xfs_trans_ail_delete(
-	struct xfs_ail		*ailp,
 	struct xfs_log_item	*lip,
 	int			shutdown_type)
 {
+	struct xfs_ail		*ailp = lip->li_ailp;
 	struct xfs_mount	*mp = ailp->ail_mount;
 	xfs_lsn_t		tail_lsn;
 
+	spin_lock(&ailp->ail_lock);
 	if (!test_bit(XFS_LI_IN_AIL, &lip->li_flags)) {
 		spin_unlock(&ailp->ail_lock);
 		if (!XFS_FORCED_SHUTDOWN(mp)) {
fs/xfs/xfs_trans_priv.h +8 -6
index 35655eac01a6..e4362fb8d483 100644
@@ -94,8 +94,7 @@ xfs_trans_ail_update(
 xfs_lsn_t xfs_ail_delete_one(struct xfs_ail *ailp, struct xfs_log_item *lip);
 void xfs_ail_update_finish(struct xfs_ail *ailp, xfs_lsn_t old_lsn)
 			__releases(ailp->ail_lock);
-void xfs_trans_ail_delete(struct xfs_ail *ailp, struct xfs_log_item *lip,
-		int shutdown_type);
+void xfs_trans_ail_delete(struct xfs_log_item *lip, int shutdown_type);
 
 static inline void
 xfs_trans_ail_remove(
@@ -103,13 +102,16 @@ xfs_trans_ail_remove(
 	int			shutdown_type)
 {
 	struct xfs_ail		*ailp = lip->li_ailp;
+	xfs_lsn_t		tail_lsn;
 
 	spin_lock(&ailp->ail_lock);
-	/* xfs_trans_ail_delete() drops the AIL lock */
-	if (test_bit(XFS_LI_IN_AIL, &lip->li_flags))
-		xfs_trans_ail_delete(ailp, lip, shutdown_type);
-	else
+	/* xfs_ail_update_finish() drops the AIL lock */
+	if (test_bit(XFS_LI_IN_AIL, &lip->li_flags)) {
+		tail_lsn = xfs_ail_delete_one(ailp, lip);
+		xfs_ail_update_finish(ailp, tail_lsn);
+	} else {
 		spin_unlock(&ailp->ail_lock);
+	}
 }
 
 void			xfs_ail_push(struct xfs_ail *, xfs_lsn_t);
Signature · 1 line
2.21.1
Reviewed-by on v4 10/17
#20 lore raw

Re: [PATCH v4 10/17] xfs: acquire ->ail_lock from xfs_trans_ail_delete()

Quoted 10 lines · Brian Foster

Several callers acquire the lock just prior to the call. Callers that require ->ail_lock for other purposes already check IN_AIL state and thus don't require the additional shutdown check in the helper. Push the lock down into xfs_trans_ail_delete(), open code the instances that still acquire it, and remove the unnecessary ailp parameter.

Ok, followed it through and I think it makes sense:

Quoted 155 lines
---
  fs/xfs/xfs_buf_item.c   | 27 +++++++++++----------------
  fs/xfs/xfs_dquot.c      |  6 ++++--
  fs/xfs/xfs_trans_ail.c  |  3 ++-
  fs/xfs/xfs_trans_priv.h | 14 ++++++++------
  4 files changed, 25 insertions(+), 25 deletions(-)
fs/xfs/xfs_buf_item.c +11 -16
index 1f7acffc99ba..06e306b49283 100644
@@ -410,7 +410,6 @@ xfs_buf_item_unpin(
  {
  	struct xfs_buf_log_item	*bip = BUF_ITEM(lip);
  	xfs_buf_t		*bp = bip->bli_buf;
-	struct xfs_ail		*ailp = lip->li_ailp;
  	int			stale = bip->bli_flags & XFS_BLI_STALE;
  	int			freed;
 
@@ -452,10 +451,10 @@ xfs_buf_item_unpin(
  		}
 
  		/*
-		 * If we get called here because of an IO error, we may
-		 * or may not have the item on the AIL. xfs_trans_ail_delete()
-		 * will take care of that situation.
-		 * xfs_trans_ail_delete() drops the AIL lock.
+		 * If we get called here because of an IO error, we may or may
+		 * not have the item on the AIL. xfs_trans_ail_delete() will
+		 * take care of that situation. xfs_trans_ail_delete() drops
+		 * the AIL lock.
  		 */
  		if (bip->bli_flags & XFS_BLI_STALE_INODE) {
  			xfs_buf_do_callbacks(bp);
@@ -463,8 +462,7 @@ xfs_buf_item_unpin(
  			list_del_init(&bp->b_li_list);
  			bp->b_iodone = NULL;
  		} else {
-			spin_lock(&ailp->ail_lock);
-			xfs_trans_ail_delete(ailp, lip, SHUTDOWN_LOG_IO_ERROR);
+			xfs_trans_ail_delete(lip, SHUTDOWN_LOG_IO_ERROR);
  			xfs_buf_item_relse(bp);
  			ASSERT(bp->b_log_item == NULL);
  		}
@@ -1205,22 +1203,19 @@ xfs_buf_iodone(
  	struct xfs_buf		*bp,
  	struct xfs_log_item	*lip)
  {
-	struct xfs_ail		*ailp = lip->li_ailp;
-
  	ASSERT(BUF_ITEM(lip)->bli_buf == bp);
 
  	xfs_buf_rele(bp);
 
  	/*
-	 * If we are forcibly shutting down, this may well be
-	 * off the AIL already. That's because we simulate the
-	 * log-committed callbacks to unpin these buffers. Or we may never
-	 * have put this item on AIL because of the transaction was
-	 * aborted forcibly. xfs_trans_ail_delete() takes care of these.
+	 * If we are forcibly shutting down, this may well be off the AIL
+	 * already. That's because we simulate the log-committed callbacks to
+	 * unpin these buffers. Or we may never have put this item on AIL
+	 * because of the transaction was aborted forcibly.
+	 * xfs_trans_ail_delete() takes care of these.
  	 *
  	 * Either way, AIL is useless if we're forcing a shutdown.
  	 */
-	spin_lock(&ailp->ail_lock);
-	xfs_trans_ail_delete(ailp, lip, SHUTDOWN_CORRUPT_INCORE);
+	xfs_trans_ail_delete(lip, SHUTDOWN_CORRUPT_INCORE);
  	xfs_buf_item_free(BUF_ITEM(lip));
  }
fs/xfs/xfs_dquot.c +4 -2
index ffe607733c50..5fb65f43b980 100644
@@ -1021,6 +1021,7 @@ xfs_qm_dqflush_done(
  	struct xfs_dq_logitem	*qip = (struct xfs_dq_logitem *)lip;
  	struct xfs_dquot	*dqp = qip->qli_dquot;
  	struct xfs_ail		*ailp = lip->li_ailp;
+	xfs_lsn_t		tail_lsn;
 
  	/*
  	 * We only want to pull the item from the AIL if its
@@ -1034,10 +1035,11 @@ xfs_qm_dqflush_done(
  	    ((lip->li_lsn == qip->qli_flush_lsn) ||
  	     test_bit(XFS_LI_FAILED, &lip->li_flags))) {
 
-		/* xfs_trans_ail_delete() drops the AIL lock. */
  		spin_lock(&ailp->ail_lock);
  		if (lip->li_lsn == qip->qli_flush_lsn) {
-			xfs_trans_ail_delete(ailp, lip, SHUTDOWN_CORRUPT_INCORE);
+			/* xfs_ail_update_finish() drops the AIL lock */
+			tail_lsn = xfs_ail_delete_one(ailp, lip);
+			xfs_ail_update_finish(ailp, tail_lsn);
  		} else {
  			/*
  			 * Clear the failed state since we are about to drop the
fs/xfs/xfs_trans_ail.c +2 -1
index 2574d01e4a83..cfba691664c7 100644
@@ -864,13 +864,14 @@ xfs_ail_delete_one(
   */
  void
  xfs_trans_ail_delete(
-	struct xfs_ail		*ailp,
  	struct xfs_log_item	*lip,
  	int			shutdown_type)
  {
+	struct xfs_ail		*ailp = lip->li_ailp;
  	struct xfs_mount	*mp = ailp->ail_mount;
  	xfs_lsn_t		tail_lsn;
 
+	spin_lock(&ailp->ail_lock);
  	if (!test_bit(XFS_LI_IN_AIL, &lip->li_flags)) {
  		spin_unlock(&ailp->ail_lock);
  		if (!XFS_FORCED_SHUTDOWN(mp)) {
fs/xfs/xfs_trans_priv.h +8 -6
index 35655eac01a6..e4362fb8d483 100644
@@ -94,8 +94,7 @@ xfs_trans_ail_update(
  xfs_lsn_t xfs_ail_delete_one(struct xfs_ail *ailp, struct xfs_log_item *lip);
  void xfs_ail_update_finish(struct xfs_ail *ailp, xfs_lsn_t old_lsn)
  			__releases(ailp->ail_lock);
-void xfs_trans_ail_delete(struct xfs_ail *ailp, struct xfs_log_item *lip,
-		int shutdown_type);
+void xfs_trans_ail_delete(struct xfs_log_item *lip, int shutdown_type);
 
  static inline void
  xfs_trans_ail_remove(
@@ -103,13 +102,16 @@ xfs_trans_ail_remove(
  	int			shutdown_type)
  {
  	struct xfs_ail		*ailp = lip->li_ailp;
+	xfs_lsn_t		tail_lsn;
 
  	spin_lock(&ailp->ail_lock);
-	/* xfs_trans_ail_delete() drops the AIL lock */
-	if (test_bit(XFS_LI_IN_AIL, &lip->li_flags))
-		xfs_trans_ail_delete(ailp, lip, shutdown_type);
-	else
+	/* xfs_ail_update_finish() drops the AIL lock */
+	if (test_bit(XFS_LI_IN_AIL, &lip->li_flags)) {
+		tail_lsn = xfs_ail_delete_one(ailp, lip);
+		xfs_ail_update_finish(ailp, tail_lsn);
+	} else {
  		spin_unlock(&ailp->ail_lock);
+	}
  }
 
  void			xfs_ail_push(struct xfs_ail *, xfs_lsn_t);
#21 lore raw

PATCH v4 11/17 xfs: use delete helper for items expected to be in AIL

In reply to Brian Foster

Various intent log items call xfs_trans_ail_remove() with a log I/O error shutdown type, but this helper historically checks whether an item is in the AIL before calling xfs_trans_ail_delete(). This means the shutdown check is essentially a no-op for users of xfs_trans_ail_remove().

It is possible that some items might not be AIL resident when the AIL remove attempt occurs, but this should be isolated to cases where the filesystem has already shutdown. For example, this includes abort of the transaction committing the intent and I/O error of the iclog buffer committing the intent to the log. Therefore, update these callsites to use xfs_trans_ail_delete() to provide AIL state validation for the common path of items being released and removed when associated done items commit to the physical log.

---
 fs/xfs/xfs_bmap_item.c     | 2 +-
 fs/xfs/xfs_extfree_item.c  | 2 +-
 fs/xfs/xfs_refcount_item.c | 2 +-
 fs/xfs/xfs_rmap_item.c     | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
fs/xfs/xfs_bmap_item.c +1 -1
index ee6f4229cebc..909221a4a8ab 100644
@@ -51,7 +51,7 @@ xfs_bui_release(
 {
 	ASSERT(atomic_read(&buip->bui_refcount) > 0);
 	if (atomic_dec_and_test(&buip->bui_refcount)) {
-		xfs_trans_ail_remove(&buip->bui_item, SHUTDOWN_LOG_IO_ERROR);
+		xfs_trans_ail_delete(&buip->bui_item, SHUTDOWN_LOG_IO_ERROR);
 		xfs_bui_item_free(buip);
 	}
 }
fs/xfs/xfs_extfree_item.c +1 -1
index 6ea847f6e298..cd98eba24884 100644
@@ -55,7 +55,7 @@ xfs_efi_release(
 {
 	ASSERT(atomic_read(&efip->efi_refcount) > 0);
 	if (atomic_dec_and_test(&efip->efi_refcount)) {
-		xfs_trans_ail_remove(&efip->efi_item, SHUTDOWN_LOG_IO_ERROR);
+		xfs_trans_ail_delete(&efip->efi_item, SHUTDOWN_LOG_IO_ERROR);
 		xfs_efi_item_free(efip);
 	}
 }
fs/xfs/xfs_refcount_item.c +1 -1
index 8eeed73928cd..712939a015a9 100644
@@ -50,7 +50,7 @@ xfs_cui_release(
 {
 	ASSERT(atomic_read(&cuip->cui_refcount) > 0);
 	if (atomic_dec_and_test(&cuip->cui_refcount)) {
-		xfs_trans_ail_remove(&cuip->cui_item, SHUTDOWN_LOG_IO_ERROR);
+		xfs_trans_ail_delete(&cuip->cui_item, SHUTDOWN_LOG_IO_ERROR);
 		xfs_cui_item_free(cuip);
 	}
 }
fs/xfs/xfs_rmap_item.c +1 -1
index 4911b68f95dd..ff949b32c051 100644
@@ -50,7 +50,7 @@ xfs_rui_release(
 {
 	ASSERT(atomic_read(&ruip->rui_refcount) > 0);
 	if (atomic_dec_and_test(&ruip->rui_refcount)) {
-		xfs_trans_ail_remove(&ruip->rui_item, SHUTDOWN_LOG_IO_ERROR);
+		xfs_trans_ail_delete(&ruip->rui_item, SHUTDOWN_LOG_IO_ERROR);
 		xfs_rui_item_free(ruip);
 	}
 }
Signature · 1 line
2.21.1
Reviewed-by on v4 11/17
#22 lore raw

Re: [PATCH v4 11/17] xfs: use delete helper for items expected to be in AIL

Quoted 16 lines · Brian Foster

Various intent log items call xfs_trans_ail_remove() with a log I/O error shutdown type, but this helper historically checks whether an item is in the AIL before calling xfs_trans_ail_delete(). This means the shutdown check is essentially a no-op for users of xfs_trans_ail_remove().

It is possible that some items might not be AIL resident when the AIL remove attempt occurs, but this should be isolated to cases where the filesystem has already shutdown. For example, this includes abort of the transaction committing the intent and I/O error of the iclog buffer committing the intent to the log. Therefore, update these callsites to use xfs_trans_ail_delete() to provide AIL state validation for the common path of items being released and removed when associated done items commit to the physical log.

Quoted 3 lines

Looks OK:

Quoted 60 lines
---
  fs/xfs/xfs_bmap_item.c     | 2 +-
  fs/xfs/xfs_extfree_item.c  | 2 +-
  fs/xfs/xfs_refcount_item.c | 2 +-
  fs/xfs/xfs_rmap_item.c     | 2 +-
  4 files changed, 4 insertions(+), 4 deletions(-)
fs/xfs/xfs_bmap_item.c +1 -1
index ee6f4229cebc..909221a4a8ab 100644
@@ -51,7 +51,7 @@ xfs_bui_release(
  {
  	ASSERT(atomic_read(&buip->bui_refcount) > 0);
  	if (atomic_dec_and_test(&buip->bui_refcount)) {
-		xfs_trans_ail_remove(&buip->bui_item, SHUTDOWN_LOG_IO_ERROR);
+		xfs_trans_ail_delete(&buip->bui_item, SHUTDOWN_LOG_IO_ERROR);
  		xfs_bui_item_free(buip);
  	}
  }
fs/xfs/xfs_extfree_item.c +1 -1
index 6ea847f6e298..cd98eba24884 100644
@@ -55,7 +55,7 @@ xfs_efi_release(
  {
  	ASSERT(atomic_read(&efip->efi_refcount) > 0);
  	if (atomic_dec_and_test(&efip->efi_refcount)) {
-		xfs_trans_ail_remove(&efip->efi_item, SHUTDOWN_LOG_IO_ERROR);
+		xfs_trans_ail_delete(&efip->efi_item, SHUTDOWN_LOG_IO_ERROR);
  		xfs_efi_item_free(efip);
  	}
  }
fs/xfs/xfs_refcount_item.c +1 -1
index 8eeed73928cd..712939a015a9 100644
@@ -50,7 +50,7 @@ xfs_cui_release(
  {
  	ASSERT(atomic_read(&cuip->cui_refcount) > 0);
  	if (atomic_dec_and_test(&cuip->cui_refcount)) {
-		xfs_trans_ail_remove(&cuip->cui_item, SHUTDOWN_LOG_IO_ERROR);
+		xfs_trans_ail_delete(&cuip->cui_item, SHUTDOWN_LOG_IO_ERROR);
  		xfs_cui_item_free(cuip);
  	}
  }
fs/xfs/xfs_rmap_item.c +1 -1
index 4911b68f95dd..ff949b32c051 100644
@@ -50,7 +50,7 @@ xfs_rui_release(
  {
  	ASSERT(atomic_read(&ruip->rui_refcount) > 0);
  	if (atomic_dec_and_test(&ruip->rui_refcount)) {
-		xfs_trans_ail_remove(&ruip->rui_item, SHUTDOWN_LOG_IO_ERROR);
+		xfs_trans_ail_delete(&ruip->rui_item, SHUTDOWN_LOG_IO_ERROR);
  		xfs_rui_item_free(ruip);
  	}
  }
#23 lore raw

PATCH v4 12/17 xfs: drop unused shutdown parameter from xfs_trans_ail_remove()

In reply to Brian Foster

The shutdown parameter of xfs_trans_ail_remove() is no longer used. The remaining callers use it for items that legitimately might not be in the AIL or from contexts where AIL state has already been checked. Remove the unnecessary parameter and fix up the callers.

---
 fs/xfs/xfs_buf_item.c   | 2 +-
 fs/xfs/xfs_dquot.c      | 2 +-
 fs/xfs/xfs_dquot_item.c | 2 +-
 fs/xfs/xfs_inode_item.c | 6 +-----
 fs/xfs/xfs_trans_priv.h | 3 +--
 5 files changed, 5 insertions(+), 10 deletions(-)
fs/xfs/xfs_buf_item.c +1 -1
index 06e306b49283..47c547aca1f1 100644
@@ -558,7 +558,7 @@ xfs_buf_item_put(
 	 * state.
 	 */
 	if (aborted)
-		xfs_trans_ail_remove(lip, SHUTDOWN_LOG_IO_ERROR);
+		xfs_trans_ail_remove(lip);
 	xfs_buf_item_relse(bip->bli_buf);
 	return true;
 }
fs/xfs/xfs_dquot.c +1 -1
index 5fb65f43b980..497a9dbef1c9 100644
@@ -1162,7 +1162,7 @@ xfs_qm_dqflush(
 
 out_abort:
 	dqp->dq_flags &= ~XFS_DQ_DIRTY;
-	xfs_trans_ail_remove(lip, SHUTDOWN_CORRUPT_INCORE);
+	xfs_trans_ail_remove(lip);
 	xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
 out_unlock:
 	xfs_dqfunlock(dqp);
fs/xfs/xfs_dquot_item.c +1 -1
index 5a7808299a32..8bd46810d5db 100644
@@ -343,7 +343,7 @@ xfs_qm_qoff_logitem_relse(
 	ASSERT(test_bit(XFS_LI_IN_AIL, &lip->li_flags) ||
 	       test_bit(XFS_LI_ABORTED, &lip->li_flags) ||
 	       XFS_FORCED_SHUTDOWN(lip->li_mountp));
-	xfs_trans_ail_remove(lip, SHUTDOWN_LOG_IO_ERROR);
+	xfs_trans_ail_remove(lip);
 	kmem_free(lip->li_lv_shadow);
 	kmem_free(qoff);
 }
fs/xfs/xfs_inode_item.c +1 -5
index 1d4d256a2e96..0e449d0a3d5c 100644
@@ -768,11 +768,7 @@ xfs_iflush_abort(
 	xfs_inode_log_item_t	*iip = ip->i_itemp;
 
 	if (iip) {
-		if (test_bit(XFS_LI_IN_AIL, &iip->ili_item.li_flags)) {
-			xfs_trans_ail_remove(&iip->ili_item,
-					     stale ? SHUTDOWN_LOG_IO_ERROR :
-						     SHUTDOWN_CORRUPT_INCORE);
-		}
+		xfs_trans_ail_remove(&iip->ili_item);
 		iip->ili_logged = 0;
 		/*
 		 * Clear the ili_last_fields bits now that we know that the
fs/xfs/xfs_trans_priv.h +1 -2
index e4362fb8d483..ab0a82e90825 100644
@@ -98,8 +98,7 @@ void xfs_trans_ail_delete(struct xfs_log_item *lip, int shutdown_type);
 
 static inline void
 xfs_trans_ail_remove(
-	struct xfs_log_item	*lip,
-	int			shutdown_type)
+	struct xfs_log_item	*lip)
 {
 	struct xfs_ail		*ailp = lip->li_ailp;
 	xfs_lsn_t		tail_lsn;
Signature · 1 line
2.21.1
Reviewed-by on v4 12/17
#24 lore raw

Re: [PATCH v4 12/17] xfs: drop unused shutdown parameter from xfs_trans_ail_remove()

Quoted 8 lines · Brian Foster

The shutdown parameter of xfs_trans_ail_remove() is no longer used. The remaining callers use it for items that legitimately might not be in the AIL or from contexts where AIL state has already been checked. Remove the unnecessary parameter and fix up the callers.

Looks ok to me:

Quoted 79 lines
---
  fs/xfs/xfs_buf_item.c   | 2 +-
  fs/xfs/xfs_dquot.c      | 2 +-
  fs/xfs/xfs_dquot_item.c | 2 +-
  fs/xfs/xfs_inode_item.c | 6 +-----
  fs/xfs/xfs_trans_priv.h | 3 +--
  5 files changed, 5 insertions(+), 10 deletions(-)
fs/xfs/xfs_buf_item.c +1 -1
index 06e306b49283..47c547aca1f1 100644
@@ -558,7 +558,7 @@ xfs_buf_item_put(
  	 * state.
  	 */
  	if (aborted)
-		xfs_trans_ail_remove(lip, SHUTDOWN_LOG_IO_ERROR);
+		xfs_trans_ail_remove(lip);
  	xfs_buf_item_relse(bip->bli_buf);
  	return true;
  }
fs/xfs/xfs_dquot.c +1 -1
index 5fb65f43b980..497a9dbef1c9 100644
@@ -1162,7 +1162,7 @@ xfs_qm_dqflush(
 
  out_abort:
  	dqp->dq_flags &= ~XFS_DQ_DIRTY;
-	xfs_trans_ail_remove(lip, SHUTDOWN_CORRUPT_INCORE);
+	xfs_trans_ail_remove(lip);
  	xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
  out_unlock:
  	xfs_dqfunlock(dqp);
fs/xfs/xfs_dquot_item.c +1 -1
index 5a7808299a32..8bd46810d5db 100644
@@ -343,7 +343,7 @@ xfs_qm_qoff_logitem_relse(
  	ASSERT(test_bit(XFS_LI_IN_AIL, &lip->li_flags) ||
  	       test_bit(XFS_LI_ABORTED, &lip->li_flags) ||
  	       XFS_FORCED_SHUTDOWN(lip->li_mountp));
-	xfs_trans_ail_remove(lip, SHUTDOWN_LOG_IO_ERROR);
+	xfs_trans_ail_remove(lip);
  	kmem_free(lip->li_lv_shadow);
  	kmem_free(qoff);
  }
fs/xfs/xfs_inode_item.c +1 -5
index 1d4d256a2e96..0e449d0a3d5c 100644
@@ -768,11 +768,7 @@ xfs_iflush_abort(
  	xfs_inode_log_item_t	*iip = ip->i_itemp;
 
  	if (iip) {
-		if (test_bit(XFS_LI_IN_AIL, &iip->ili_item.li_flags)) {
-			xfs_trans_ail_remove(&iip->ili_item,
-					     stale ? SHUTDOWN_LOG_IO_ERROR :
-						     SHUTDOWN_CORRUPT_INCORE);
-		}
+		xfs_trans_ail_remove(&iip->ili_item);
  		iip->ili_logged = 0;
  		/*
  		 * Clear the ili_last_fields bits now that we know that the
fs/xfs/xfs_trans_priv.h +1 -2
index e4362fb8d483..ab0a82e90825 100644
@@ -98,8 +98,7 @@ void xfs_trans_ail_delete(struct xfs_log_item *lip, int shutdown_type);
 
  static inline void
  xfs_trans_ail_remove(
-	struct xfs_log_item	*lip,
-	int			shutdown_type)
+	struct xfs_log_item	*lip)
  {
  	struct xfs_ail		*ailp = lip->li_ailp;
  	xfs_lsn_t		tail_lsn;
#25 lore raw

PATCH v4 13/17 xfs: combine xfs_trans_ail_[remove|delete]()

In reply to Brian Foster

Now that the functions and callers of xfs_trans_ail_[remove|delete]() have been fixed up appropriately, the only difference between the two is the shutdown behavior. There are only a few callers of the _remove() variant, so make the shutdown conditional on the parameter and combine the two functions.

---
 fs/xfs/xfs_buf_item.c   |  2 +-
 fs/xfs/xfs_dquot.c      |  2 +-
 fs/xfs/xfs_dquot_item.c |  2 +-
 fs/xfs/xfs_inode_item.c |  2 +-
 fs/xfs/xfs_trans_ail.c  | 24 ++----------------------
 fs/xfs/xfs_trans_priv.h | 17 -----------------
 6 files changed, 6 insertions(+), 43 deletions(-)
fs/xfs/xfs_buf_item.c +1 -1
index 47c547aca1f1..9e75e8d6042e 100644
@@ -558,7 +558,7 @@ xfs_buf_item_put(
 	 * state.
 	 */
 	if (aborted)
-		xfs_trans_ail_remove(lip);
+		xfs_trans_ail_delete(lip, 0);
 	xfs_buf_item_relse(bip->bli_buf);
 	return true;
 }
fs/xfs/xfs_dquot.c +1 -1
index 497a9dbef1c9..52e0f7245afc 100644
@@ -1162,7 +1162,7 @@ xfs_qm_dqflush(
 
 out_abort:
 	dqp->dq_flags &= ~XFS_DQ_DIRTY;
-	xfs_trans_ail_remove(lip);
+	xfs_trans_ail_delete(lip, 0);
 	xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
 out_unlock:
 	xfs_dqfunlock(dqp);
fs/xfs/xfs_dquot_item.c +1 -1
index 8bd46810d5db..349c92d26570 100644
@@ -343,7 +343,7 @@ xfs_qm_qoff_logitem_relse(
 	ASSERT(test_bit(XFS_LI_IN_AIL, &lip->li_flags) ||
 	       test_bit(XFS_LI_ABORTED, &lip->li_flags) ||
 	       XFS_FORCED_SHUTDOWN(lip->li_mountp));
-	xfs_trans_ail_remove(lip);
+	xfs_trans_ail_delete(lip, 0);
 	kmem_free(lip->li_lv_shadow);
 	kmem_free(qoff);
 }
fs/xfs/xfs_inode_item.c +1 -1
index 0e449d0a3d5c..1a02058178d1 100644
@@ -768,7 +768,7 @@ xfs_iflush_abort(
 	xfs_inode_log_item_t	*iip = ip->i_itemp;
 
 	if (iip) {
-		xfs_trans_ail_remove(&iip->ili_item);
+		xfs_trans_ail_delete(&iip->ili_item, 0);
 		iip->ili_logged = 0;
 		/*
 		 * Clear the ili_last_fields bits now that we know that the
fs/xfs/xfs_trans_ail.c +2 -22
index cfba691664c7..bf09d4b4df58 100644
@@ -841,27 +841,6 @@ xfs_ail_delete_one(
 	return 0;
 }
 
-/**
- * Remove a log items from the AIL
- *
- * @xfs_trans_ail_delete_bulk takes an array of log items that all need to
- * removed from the AIL. The caller is already holding the AIL lock, and done
- * all the checks necessary to ensure the items passed in via @log_items are
- * ready for deletion. This includes checking that the items are in the AIL.
- *
- * For each log item to be removed, unlink it  from the AIL, clear the IN_AIL
- * flag from the item and reset the item's lsn to 0. If we remove the first
- * item in the AIL, update the log tail to match the new minimum LSN in the
- * AIL.
- *
- * This function will not drop the AIL lock until all items are removed from
- * the AIL to minimise the amount of lock traffic on the AIL. This does not
- * greatly increase the AIL hold time, but does significantly reduce the amount
- * of traffic on the lock, especially during IO completion.
- *
- * This function must be called with the AIL lock held.  The lock is dropped
- * before returning.
- */
 void
 xfs_trans_ail_delete(
 	struct xfs_log_item	*lip,
@@ -874,7 +853,7 @@ xfs_trans_ail_delete(
 	spin_lock(&ailp->ail_lock);
 	if (!test_bit(XFS_LI_IN_AIL, &lip->li_flags)) {
 		spin_unlock(&ailp->ail_lock);
-		if (!XFS_FORCED_SHUTDOWN(mp)) {
+		if (shutdown_type && !XFS_FORCED_SHUTDOWN(mp)) {
 			xfs_alert_tag(mp, XFS_PTAG_AILDELETE,
 	"%s: attempting to delete a log item that is not in the AIL",
 					__func__);
@@ -883,6 +862,7 @@ xfs_trans_ail_delete(
 		return;
 	}
 
+	/* xfs_ail_update_finish() drops the AIL lock */
 	tail_lsn = xfs_ail_delete_one(ailp, lip);
 	xfs_ail_update_finish(ailp, tail_lsn);
 }
fs/xfs/xfs_trans_priv.h +0 -17
index ab0a82e90825..cc046d9557ae 100644
@@ -96,23 +96,6 @@ void xfs_ail_update_finish(struct xfs_ail *ailp, xfs_lsn_t old_lsn)
 			__releases(ailp->ail_lock);
 void xfs_trans_ail_delete(struct xfs_log_item *lip, int shutdown_type);
 
-static inline void
-xfs_trans_ail_remove(
-	struct xfs_log_item	*lip)
-{
-	struct xfs_ail		*ailp = lip->li_ailp;
-	xfs_lsn_t		tail_lsn;
-
-	spin_lock(&ailp->ail_lock);
-	/* xfs_ail_update_finish() drops the AIL lock */
-	if (test_bit(XFS_LI_IN_AIL, &lip->li_flags)) {
-		tail_lsn = xfs_ail_delete_one(ailp, lip);
-		xfs_ail_update_finish(ailp, tail_lsn);
-	} else {
-		spin_unlock(&ailp->ail_lock);
-	}
-}
-
 void			xfs_ail_push(struct xfs_ail *, xfs_lsn_t);
 void			xfs_ail_push_all(struct xfs_ail *);
 void			xfs_ail_push_all_sync(struct xfs_ail *);
Signature · 1 line
2.21.1
Reviewed-by on v4 13/17
#26 lore raw

Re: [PATCH v4 13/17] xfs: combine xfs_trans_ail_[remove|delete]()

Quoted 11 lines · Brian Foster

Now that the functions and callers of xfs_trans_ail_[remove|delete]() have been fixed up appropriately, the only difference between the two is the shutdown behavior. There are only a few callers of the _remove() variant, so make the shutdown conditional on the parameter and combine the two functions.

Ok, looks ok

Quoted 139 lines
---
  fs/xfs/xfs_buf_item.c   |  2 +-
  fs/xfs/xfs_dquot.c      |  2 +-
  fs/xfs/xfs_dquot_item.c |  2 +-
  fs/xfs/xfs_inode_item.c |  2 +-
  fs/xfs/xfs_trans_ail.c  | 24 ++----------------------
  fs/xfs/xfs_trans_priv.h | 17 -----------------
  6 files changed, 6 insertions(+), 43 deletions(-)
fs/xfs/xfs_buf_item.c +1 -1
index 47c547aca1f1..9e75e8d6042e 100644
@@ -558,7 +558,7 @@ xfs_buf_item_put(
  	 * state.
  	 */
  	if (aborted)
-		xfs_trans_ail_remove(lip);
+		xfs_trans_ail_delete(lip, 0);
  	xfs_buf_item_relse(bip->bli_buf);
  	return true;
  }
fs/xfs/xfs_dquot.c +1 -1
index 497a9dbef1c9..52e0f7245afc 100644
@@ -1162,7 +1162,7 @@ xfs_qm_dqflush(
 
  out_abort:
  	dqp->dq_flags &= ~XFS_DQ_DIRTY;
-	xfs_trans_ail_remove(lip);
+	xfs_trans_ail_delete(lip, 0);
  	xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
  out_unlock:
  	xfs_dqfunlock(dqp);
fs/xfs/xfs_dquot_item.c +1 -1
index 8bd46810d5db..349c92d26570 100644
@@ -343,7 +343,7 @@ xfs_qm_qoff_logitem_relse(
  	ASSERT(test_bit(XFS_LI_IN_AIL, &lip->li_flags) ||
  	       test_bit(XFS_LI_ABORTED, &lip->li_flags) ||
  	       XFS_FORCED_SHUTDOWN(lip->li_mountp));
-	xfs_trans_ail_remove(lip);
+	xfs_trans_ail_delete(lip, 0);
  	kmem_free(lip->li_lv_shadow);
  	kmem_free(qoff);
  }
fs/xfs/xfs_inode_item.c +1 -1
index 0e449d0a3d5c..1a02058178d1 100644
@@ -768,7 +768,7 @@ xfs_iflush_abort(
  	xfs_inode_log_item_t	*iip = ip->i_itemp;
 
  	if (iip) {
-		xfs_trans_ail_remove(&iip->ili_item);
+		xfs_trans_ail_delete(&iip->ili_item, 0);
  		iip->ili_logged = 0;
  		/*
  		 * Clear the ili_last_fields bits now that we know that the
fs/xfs/xfs_trans_ail.c +2 -22
index cfba691664c7..bf09d4b4df58 100644
@@ -841,27 +841,6 @@ xfs_ail_delete_one(
  	return 0;
  }
 
-/**
- * Remove a log items from the AIL
- *
- * @xfs_trans_ail_delete_bulk takes an array of log items that all need to
- * removed from the AIL. The caller is already holding the AIL lock, and done
- * all the checks necessary to ensure the items passed in via @log_items are
- * ready for deletion. This includes checking that the items are in the AIL.
- *
- * For each log item to be removed, unlink it  from the AIL, clear the IN_AIL
- * flag from the item and reset the item's lsn to 0. If we remove the first
- * item in the AIL, update the log tail to match the new minimum LSN in the
- * AIL.
- *
- * This function will not drop the AIL lock until all items are removed from
- * the AIL to minimise the amount of lock traffic on the AIL. This does not
- * greatly increase the AIL hold time, but does significantly reduce the amount
- * of traffic on the lock, especially during IO completion.
- *
- * This function must be called with the AIL lock held.  The lock is dropped
- * before returning.
- */
  void
  xfs_trans_ail_delete(
  	struct xfs_log_item	*lip,
@@ -874,7 +853,7 @@ xfs_trans_ail_delete(
  	spin_lock(&ailp->ail_lock);
  	if (!test_bit(XFS_LI_IN_AIL, &lip->li_flags)) {
  		spin_unlock(&ailp->ail_lock);
-		if (!XFS_FORCED_SHUTDOWN(mp)) {
+		if (shutdown_type && !XFS_FORCED_SHUTDOWN(mp)) {
  			xfs_alert_tag(mp, XFS_PTAG_AILDELETE,
  	"%s: attempting to delete a log item that is not in the AIL",
  					__func__);
@@ -883,6 +862,7 @@ xfs_trans_ail_delete(
  		return;
  	}
 
+	/* xfs_ail_update_finish() drops the AIL lock */
  	tail_lsn = xfs_ail_delete_one(ailp, lip);
  	xfs_ail_update_finish(ailp, tail_lsn);
  }
fs/xfs/xfs_trans_priv.h +0 -17
index ab0a82e90825..cc046d9557ae 100644
@@ -96,23 +96,6 @@ void xfs_ail_update_finish(struct xfs_ail *ailp, xfs_lsn_t old_lsn)
  			__releases(ailp->ail_lock);
  void xfs_trans_ail_delete(struct xfs_log_item *lip, int shutdown_type);
 
-static inline void
-xfs_trans_ail_remove(
-	struct xfs_log_item	*lip)
-{
-	struct xfs_ail		*ailp = lip->li_ailp;
-	xfs_lsn_t		tail_lsn;
-
-	spin_lock(&ailp->ail_lock);
-	/* xfs_ail_update_finish() drops the AIL lock */
-	if (test_bit(XFS_LI_IN_AIL, &lip->li_flags)) {
-		tail_lsn = xfs_ail_delete_one(ailp, lip);
-		xfs_ail_update_finish(ailp, tail_lsn);
-	} else {
-		spin_unlock(&ailp->ail_lock);
-	}
-}
-
  void			xfs_ail_push(struct xfs_ail *, xfs_lsn_t);
  void			xfs_ail_push_all(struct xfs_ail *);
  void			xfs_ail_push_all_sync(struct xfs_ail *);
#27 lore raw

PATCH v4 14/17 xfs: remove unused iflush stale parameter

In reply to Brian Foster

The stale parameter was used to control the now unused shutdown parameter of xfs_trans_ail_remove().

---
 fs/xfs/xfs_icache.c     | 2 +-
 fs/xfs/xfs_inode.c      | 2 +-
 fs/xfs/xfs_inode_item.c | 7 +++----
 fs/xfs/xfs_inode_item.h | 2 +-
 4 files changed, 6 insertions(+), 7 deletions(-)
fs/xfs/xfs_icache.c +1 -1
index 8bf1d15be3f6..7032efcb6814 100644
@@ -1128,7 +1128,7 @@ xfs_reclaim_inode(
 	if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
 		xfs_iunpin_wait(ip);
 		/* xfs_iflush_abort() drops the flush lock */
-		xfs_iflush_abort(ip, false);
+		xfs_iflush_abort(ip);
 		goto reclaim;
 	}
 	if (xfs_ipincount(ip)) {
fs/xfs/xfs_inode.c +1 -1
index 6fb3e26afa8b..e0d9a5bf7507 100644
@@ -3702,7 +3702,7 @@ xfs_iflush(
 	return 0;
 
 abort:
-	xfs_iflush_abort(ip, false);
+	xfs_iflush_abort(ip);
 shutdown:
 	xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE);
 	return error;
fs/xfs/xfs_inode_item.c +3 -4
index 1a02058178d1..cefa2484f0db 100644
@@ -762,10 +762,9 @@ xfs_iflush_done(
  */
 void
 xfs_iflush_abort(
-	xfs_inode_t		*ip,
-	bool			stale)
+	struct xfs_inode		*ip)
 {
-	xfs_inode_log_item_t	*iip = ip->i_itemp;
+	struct xfs_inode_log_item	*iip = ip->i_itemp;
 
 	if (iip) {
 		xfs_trans_ail_delete(&iip->ili_item, 0);
@@ -793,7 +792,7 @@ xfs_istale_done(
 	struct xfs_buf		*bp,
 	struct xfs_log_item	*lip)
 {
-	xfs_iflush_abort(INODE_ITEM(lip)->ili_inode, true);
+	xfs_iflush_abort(INODE_ITEM(lip)->ili_inode);
 }
 
 /*
fs/xfs/xfs_inode_item.h +1 -1
index 07a60e74c39c..a68c114b79a0 100644
@@ -34,7 +34,7 @@ extern void xfs_inode_item_init(struct xfs_inode *, struct xfs_mount *);
 extern void xfs_inode_item_destroy(struct xfs_inode *);
 extern void xfs_iflush_done(struct xfs_buf *, struct xfs_log_item *);
 extern void xfs_istale_done(struct xfs_buf *, struct xfs_log_item *);
-extern void xfs_iflush_abort(struct xfs_inode *, bool);
+extern void xfs_iflush_abort(struct xfs_inode *);
 extern int xfs_inode_item_format_convert(xfs_log_iovec_t *,
 					 struct xfs_inode_log_format *);
 
Signature · 1 line
2.21.1
#28 lore raw

PATCH v4 15/17 xfs: random buffer write failure errortag

In reply to Brian Foster

Introduce an error tag to randomly fail async buffer writes. This is primarily to facilitate testing of the XFS error configuration mechanism.

---
 fs/xfs/libxfs/xfs_errortag.h | 4 +++-
 fs/xfs/xfs_buf.c             | 6 ++++++
 fs/xfs/xfs_error.c           | 3 +++
 3 files changed, 12 insertions(+), 1 deletion(-)
fs/xfs/libxfs/xfs_errortag.h +3 -1
index 79e6c4fb1d8a..2486dab19023 100644
@@ -55,7 +55,8 @@
 #define XFS_ERRTAG_FORCE_SCRUB_REPAIR			32
 #define XFS_ERRTAG_FORCE_SUMMARY_RECALC			33
 #define XFS_ERRTAG_IUNLINK_FALLBACK			34
-#define XFS_ERRTAG_MAX					35
+#define XFS_ERRTAG_BUF_IOERROR				35
+#define XFS_ERRTAG_MAX					36
 
 /*
  * Random factors for above tags, 1 means always, 2 means 1/2 time, etc.
@@ -95,5 +96,6 @@
 #define XFS_RANDOM_FORCE_SCRUB_REPAIR			1
 #define XFS_RANDOM_FORCE_SUMMARY_RECALC			1
 #define XFS_RANDOM_IUNLINK_FALLBACK			(XFS_RANDOM_DEFAULT/10)
+#define XFS_RANDOM_BUF_IOERROR				XFS_RANDOM_DEFAULT
 
 #endif /* __XFS_ERRORTAG_H_ */
fs/xfs/xfs_buf.c +6 -0
index 8f0f605de579..61629efd56ee 100644
@@ -1289,6 +1289,12 @@ xfs_buf_bio_end_io(
 	struct bio		*bio)
 {
 	struct xfs_buf		*bp = (struct xfs_buf *)bio->bi_private;
+	struct xfs_mount	*mp = bp->b_mount;
+
+	if (!bio->bi_status &&
+	    (bp->b_flags & XBF_WRITE) && (bp->b_flags & XBF_ASYNC) &&
+	    XFS_TEST_ERROR(false, mp, XFS_ERRTAG_BUF_IOERROR))
+		bio->bi_status = BLK_STS_IOERR;
 
 	/*
 	 * don't overwrite existing errors - otherwise we can lose errors on
fs/xfs/xfs_error.c +3 -0
index a21e9cc6516a..7f6e20899473 100644
@@ -53,6 +53,7 @@ static unsigned int xfs_errortag_random_default[] = {
 	XFS_RANDOM_FORCE_SCRUB_REPAIR,
 	XFS_RANDOM_FORCE_SUMMARY_RECALC,
 	XFS_RANDOM_IUNLINK_FALLBACK,
+	XFS_RANDOM_BUF_IOERROR,
 };
 
 struct xfs_errortag_attr {
@@ -162,6 +163,7 @@ XFS_ERRORTAG_ATTR_RW(buf_lru_ref,	XFS_ERRTAG_BUF_LRU_REF);
 XFS_ERRORTAG_ATTR_RW(force_repair,	XFS_ERRTAG_FORCE_SCRUB_REPAIR);
 XFS_ERRORTAG_ATTR_RW(bad_summary,	XFS_ERRTAG_FORCE_SUMMARY_RECALC);
 XFS_ERRORTAG_ATTR_RW(iunlink_fallback,	XFS_ERRTAG_IUNLINK_FALLBACK);
+XFS_ERRORTAG_ATTR_RW(buf_ioerror,	XFS_ERRTAG_BUF_IOERROR);
 
 static struct attribute *xfs_errortag_attrs[] = {
 	XFS_ERRORTAG_ATTR_LIST(noerror),
@@ -199,6 +201,7 @@ static struct attribute *xfs_errortag_attrs[] = {
 	XFS_ERRORTAG_ATTR_LIST(force_repair),
 	XFS_ERRORTAG_ATTR_LIST(bad_summary),
 	XFS_ERRORTAG_ATTR_LIST(iunlink_fallback),
+	XFS_ERRORTAG_ATTR_LIST(buf_ioerror),
 	NULL,
 };
 
Signature · 1 line
2.21.1
#29 lore raw

PATCH v4 16/17 xfs: remove unused shutdown types

In reply to Brian Foster

Both types control shutdown messaging and neither is used in the current codebase.

---
 fs/xfs/xfs_fsops.c | 5 +----
 fs/xfs/xfs_mount.h | 2 --
 2 files changed, 1 insertion(+), 6 deletions(-)
fs/xfs/xfs_fsops.c +1 -4
index 3e61d0cc23f8..ef1d5bb88b93 100644
@@ -504,10 +504,7 @@ xfs_do_force_shutdown(
 	} else if (logerror) {
 		xfs_alert_tag(mp, XFS_PTAG_SHUTDOWN_LOGERROR,
 			"Log I/O Error Detected. Shutting down filesystem");
-	} else if (flags & SHUTDOWN_DEVICE_REQ) {
-		xfs_alert_tag(mp, XFS_PTAG_SHUTDOWN_IOERROR,
-			"All device paths lost. Shutting down filesystem");
-	} else if (!(flags & SHUTDOWN_REMOTE_REQ)) {
+	} else {
 		xfs_alert_tag(mp, XFS_PTAG_SHUTDOWN_IOERROR,
 			"I/O Error Detected. Shutting down filesystem");
 	}
fs/xfs/xfs_mount.h +0 -2
index b2e4598fdf7d..07b5ba7e5fbd 100644
@@ -259,8 +259,6 @@ void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname,
 #define SHUTDOWN_LOG_IO_ERROR	0x0002	/* write attempt to the log failed */
 #define SHUTDOWN_FORCE_UMOUNT	0x0004	/* shutdown from a forced unmount */
 #define SHUTDOWN_CORRUPT_INCORE	0x0008	/* corrupt in-memory data structures */
-#define SHUTDOWN_REMOTE_REQ	0x0010	/* shutdown came from remote cell */
-#define SHUTDOWN_DEVICE_REQ	0x0020	/* failed all paths to the device */
 
 /*
  * Flags for xfs_mountfs
Signature · 1 line
2.21.1
Reviewed-by on v4 16/17
#30 lore raw

Re: [PATCH v4 16/17] xfs: remove unused shutdown types

Quoted 7 lines · Brian Foster

Both types control shutdown messaging and neither is used in the current codebase.

Looks ok to me:

Quoted 35 lines
---
  fs/xfs/xfs_fsops.c | 5 +----
  fs/xfs/xfs_mount.h | 2 --
  2 files changed, 1 insertion(+), 6 deletions(-)
fs/xfs/xfs_fsops.c +1 -4
index 3e61d0cc23f8..ef1d5bb88b93 100644
@@ -504,10 +504,7 @@ xfs_do_force_shutdown(
  	} else if (logerror) {
  		xfs_alert_tag(mp, XFS_PTAG_SHUTDOWN_LOGERROR,
  			"Log I/O Error Detected. Shutting down filesystem");
-	} else if (flags & SHUTDOWN_DEVICE_REQ) {
-		xfs_alert_tag(mp, XFS_PTAG_SHUTDOWN_IOERROR,
-			"All device paths lost. Shutting down filesystem");
-	} else if (!(flags & SHUTDOWN_REMOTE_REQ)) {
+	} else {
  		xfs_alert_tag(mp, XFS_PTAG_SHUTDOWN_IOERROR,
  			"I/O Error Detected. Shutting down filesystem");
  	}
fs/xfs/xfs_mount.h +0 -2
index b2e4598fdf7d..07b5ba7e5fbd 100644
@@ -259,8 +259,6 @@ void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname,
  #define SHUTDOWN_LOG_IO_ERROR	0x0002	/* write attempt to the log failed */
  #define SHUTDOWN_FORCE_UMOUNT	0x0004	/* shutdown from a forced unmount */
  #define SHUTDOWN_CORRUPT_INCORE	0x0008	/* corrupt in-memory data structures */
-#define SHUTDOWN_REMOTE_REQ	0x0010	/* shutdown came from remote cell */
-#define SHUTDOWN_DEVICE_REQ	0x0020	/* failed all paths to the device */
 
  /*
   * Flags for xfs_mountfs
#31 lore raw

PATCH v4 17/17 xfs: remove unused iget_flags param from xfs_imap_to_bp()

In reply to Brian Foster

iget_flags is unused in xfs_imap_to_bp(). Remove the parameter and fix up the callers.

---
 fs/xfs/libxfs/xfs_inode_buf.c | 5 ++---
 fs/xfs/libxfs/xfs_inode_buf.h | 2 +-
 fs/xfs/scrub/ialloc.c         | 3 +--
 fs/xfs/xfs_inode.c            | 7 +++----
 fs/xfs/xfs_log_recover.c      | 2 +-
 5 files changed, 8 insertions(+), 11 deletions(-)
fs/xfs/libxfs/xfs_inode_buf.c +2 -3
index b102e611bf54..81a010422bea 100644
@@ -161,8 +161,7 @@ xfs_imap_to_bp(
 	struct xfs_imap		*imap,
 	struct xfs_dinode       **dipp,
 	struct xfs_buf		**bpp,
-	uint			buf_flags,
-	uint			iget_flags)
+	uint			buf_flags)
 {
 	struct xfs_buf		*bp;
 	int			error;
@@ -621,7 +620,7 @@ xfs_iread(
 	/*
 	 * Get pointers to the on-disk inode and the buffer containing it.
 	 */
-	error = xfs_imap_to_bp(mp, tp, &ip->i_imap, &dip, &bp, 0, iget_flags);
+	error = xfs_imap_to_bp(mp, tp, &ip->i_imap, &dip, &bp, 0);
 	if (error)
 		return error;
 
fs/xfs/libxfs/xfs_inode_buf.h +1 -1
index 9b373dcf9e34..d9b4781ac9fd 100644
@@ -48,7 +48,7 @@ struct xfs_imap {
 
 int	xfs_imap_to_bp(struct xfs_mount *, struct xfs_trans *,
 		       struct xfs_imap *, struct xfs_dinode **,
-		       struct xfs_buf **, uint, uint);
+		       struct xfs_buf **, uint);
 int	xfs_iread(struct xfs_mount *, struct xfs_trans *,
 		  struct xfs_inode *, uint);
 void	xfs_dinode_calc_crc(struct xfs_mount *, struct xfs_dinode *);
fs/xfs/scrub/ialloc.c +1 -2
index 64c217eb06a7..6517d67e8d51 100644
@@ -278,8 +278,7 @@ xchk_iallocbt_check_cluster(
 			&XFS_RMAP_OINFO_INODES);
 
 	/* Grab the inode cluster buffer. */
-	error = xfs_imap_to_bp(mp, bs->cur->bc_tp, &imap, &dip, &cluster_bp,
-			0, 0);
+	error = xfs_imap_to_bp(mp, bs->cur->bc_tp, &imap, &dip, &cluster_bp, 0);
 	if (!xchk_btree_xref_process_error(bs->sc, bs->cur, 0, &error))
 		return error;
 
fs/xfs/xfs_inode.c +3 -4
index e0d9a5bf7507..4f915b91b9fd 100644
@@ -2172,7 +2172,7 @@ xfs_iunlink_update_inode(
 
 	ASSERT(xfs_verify_agino_or_null(mp, agno, next_agino));
 
-	error = xfs_imap_to_bp(mp, tp, &ip->i_imap, &dip, &ibp, 0, 0);
+	error = xfs_imap_to_bp(mp, tp, &ip->i_imap, &dip, &ibp, 0);
 	if (error)
 		return error;
 
@@ -2302,7 +2302,7 @@ xfs_iunlink_map_ino(
 		return error;
 	}
 
-	error = xfs_imap_to_bp(mp, tp, imap, dipp, bpp, 0, 0);
+	error = xfs_imap_to_bp(mp, tp, imap, dipp, bpp, 0);
 	if (error) {
 		xfs_warn(mp, "%s: xfs_imap_to_bp returned error %d.",
 				__func__, error);
@@ -3665,8 +3665,7 @@ xfs_iflush(
 	 * If we get any other error, we effectively have a corruption situation
 	 * and we cannot flush the inode. Abort the flush and shut down.
 	 */
-	error = xfs_imap_to_bp(mp, NULL, &ip->i_imap, &dip, &bp, XBF_TRYLOCK,
-			       0);
+	error = xfs_imap_to_bp(mp, NULL, &ip->i_imap, &dip, &bp, XBF_TRYLOCK);
 	if (error == -EAGAIN) {
 		xfs_ifunlock(ip);
 		return error;
fs/xfs/xfs_log_recover.c +1 -1
index 11c3502b07b1..6a98fd9f00b3 100644
@@ -4987,7 +4987,7 @@ xlog_recover_process_one_iunlink(
 	/*
 	 * Get the on disk inode to find the next inode in the bucket.
 	 */
-	error = xfs_imap_to_bp(mp, NULL, &ip->i_imap, &dip, &ibp, 0, 0);
+	error = xfs_imap_to_bp(mp, NULL, &ip->i_imap, &dip, &ibp, 0);
 	if (error)
 		goto fail_iput;
 
Signature · 1 line
2.21.1
Reviewed-by on v4 17/17
#32 lore raw

Re: [PATCH v4 17/17] xfs: remove unused iget_flags param from xfs_imap_to_bp()

Quoted 6 lines · Brian Foster

iget_flags is unused in xfs_imap_to_bp(). Remove the parameter and fix up the callers.

Ok, looks fine to me

Quoted 104 lines
---
  fs/xfs/libxfs/xfs_inode_buf.c | 5 ++---
  fs/xfs/libxfs/xfs_inode_buf.h | 2 +-
  fs/xfs/scrub/ialloc.c         | 3 +--
  fs/xfs/xfs_inode.c            | 7 +++----
  fs/xfs/xfs_log_recover.c      | 2 +-
  5 files changed, 8 insertions(+), 11 deletions(-)
fs/xfs/libxfs/xfs_inode_buf.c +2 -3
index b102e611bf54..81a010422bea 100644
@@ -161,8 +161,7 @@ xfs_imap_to_bp(
  	struct xfs_imap		*imap,
  	struct xfs_dinode       **dipp,
  	struct xfs_buf		**bpp,
-	uint			buf_flags,
-	uint			iget_flags)
+	uint			buf_flags)
  {
  	struct xfs_buf		*bp;
  	int			error;
@@ -621,7 +620,7 @@ xfs_iread(
  	/*
  	 * Get pointers to the on-disk inode and the buffer containing it.
  	 */
-	error = xfs_imap_to_bp(mp, tp, &ip->i_imap, &dip, &bp, 0, iget_flags);
+	error = xfs_imap_to_bp(mp, tp, &ip->i_imap, &dip, &bp, 0);
  	if (error)
  		return error;
 
fs/xfs/libxfs/xfs_inode_buf.h +1 -1
index 9b373dcf9e34..d9b4781ac9fd 100644
@@ -48,7 +48,7 @@ struct xfs_imap {
 
  int	xfs_imap_to_bp(struct xfs_mount *, struct xfs_trans *,
  		       struct xfs_imap *, struct xfs_dinode **,
-		       struct xfs_buf **, uint, uint);
+		       struct xfs_buf **, uint);
  int	xfs_iread(struct xfs_mount *, struct xfs_trans *,
  		  struct xfs_inode *, uint);
  void	xfs_dinode_calc_crc(struct xfs_mount *, struct xfs_dinode *);
fs/xfs/scrub/ialloc.c +1 -2
index 64c217eb06a7..6517d67e8d51 100644
@@ -278,8 +278,7 @@ xchk_iallocbt_check_cluster(
  			&XFS_RMAP_OINFO_INODES);
 
  	/* Grab the inode cluster buffer. */
-	error = xfs_imap_to_bp(mp, bs->cur->bc_tp, &imap, &dip, &cluster_bp,
-			0, 0);
+	error = xfs_imap_to_bp(mp, bs->cur->bc_tp, &imap, &dip, &cluster_bp, 0);
  	if (!xchk_btree_xref_process_error(bs->sc, bs->cur, 0, &error))
  		return error;
 
fs/xfs/xfs_inode.c +3 -4
index e0d9a5bf7507..4f915b91b9fd 100644
@@ -2172,7 +2172,7 @@ xfs_iunlink_update_inode(
 
  	ASSERT(xfs_verify_agino_or_null(mp, agno, next_agino));
 
-	error = xfs_imap_to_bp(mp, tp, &ip->i_imap, &dip, &ibp, 0, 0);
+	error = xfs_imap_to_bp(mp, tp, &ip->i_imap, &dip, &ibp, 0);
  	if (error)
  		return error;
 
@@ -2302,7 +2302,7 @@ xfs_iunlink_map_ino(
  		return error;
  	}
 
-	error = xfs_imap_to_bp(mp, tp, imap, dipp, bpp, 0, 0);
+	error = xfs_imap_to_bp(mp, tp, imap, dipp, bpp, 0);
  	if (error) {
  		xfs_warn(mp, "%s: xfs_imap_to_bp returned error %d.",
  				__func__, error);
@@ -3665,8 +3665,7 @@ xfs_iflush(
  	 * If we get any other error, we effectively have a corruption situation
  	 * and we cannot flush the inode. Abort the flush and shut down.
  	 */
-	error = xfs_imap_to_bp(mp, NULL, &ip->i_imap, &dip, &bp, XBF_TRYLOCK,
-			       0);
+	error = xfs_imap_to_bp(mp, NULL, &ip->i_imap, &dip, &bp, XBF_TRYLOCK);
  	if (error == -EAGAIN) {
  		xfs_ifunlock(ip);
  		return error;
fs/xfs/xfs_log_recover.c +1 -1
index 11c3502b07b1..6a98fd9f00b3 100644
@@ -4987,7 +4987,7 @@ xlog_recover_process_one_iunlink(
  	/*
  	 * Get the on disk inode to find the next inode in the bucket.
  	 */
-	error = xfs_imap_to_bp(mp, NULL, &ip->i_imap, &dip, &ibp, 0, 0);
+	error = xfs_imap_to_bp(mp, NULL, &ip->i_imap, &dip, &ibp, 0);
  	if (error)
  		goto fail_iput;
 
#33 lore raw
In reply to Brian Foster
Quoted 9 lines · Brian Foster

Hi all,

I think everything has been reviewed to this point. Only minor changes noted below in this release. A git repo is available here[1].

The only outstanding feedback that I'm aware of is Dave's comment on patch 7 of v3 [2] regarding the shutdown assert check. I'm not aware of any means to get through xfs_wait_buftarg() with a dirty buffer that hasn't undergone the permanant error sequence and thus shut down the fs.

# echo 0 > /sys/fs/xfs/<dev>/fail_at_unmount

And now any error with a "retry forever" config (the default) will be collected by xfs_buftarg_wait() without a preceeding shutdown as xfs_buf_iodone_callback_error() will not treat it as a permanent error during unmount. i.e. this doesn't trigger:

        /* At unmount we may treat errors differently */
        if ((mp->m_flags & XFS_MOUNT_UNMOUNTING) && mp->m_fail_unmount)
                goto permanent_error;

and so the error handling just marks it with a write error and lets it go for a write retry in future. These are then collected in xfs_buftarg_wait() as nothing is going to retry them once unmount gets to this point...

Cheers,

Dave.

Signature · 2 lines
Dave Chinner
[email protected]
#34 lore raw
Quoted 18 lines · Dave Chinner
Quoted 9 lines · Brian Foster

Hi all,

I think everything has been reviewed to this point. Only minor changes noted below in this release. A git repo is available here[1].

The only outstanding feedback that I'm aware of is Dave's comment on patch 7 of v3 [2] regarding the shutdown assert check. I'm not aware of any means to get through xfs_wait_buftarg() with a dirty buffer that hasn't undergone the permanant error sequence and thus shut down the fs.

# echo 0 > /sys/fs/xfs/<dev>/fail_at_unmount

And now any error with a "retry forever" config (the default) will be collected by xfs_buftarg_wait() without a preceeding shutdown as xfs_buf_iodone_callback_error() will not treat it as a permanent error during unmount. i.e. this doesn't trigger:

Quoted 9 lines
        /* At unmount we may treat errors differently */
        if ((mp->m_flags & XFS_MOUNT_UNMOUNTING) && mp->m_fail_unmount)
                goto permanent_error;

and so the error handling just marks it with a write error and lets it go for a write retry in future. These are then collected in xfs_buftarg_wait() as nothing is going to retry them once unmount gets to this point...

That doesn't accurately describe the behavior of that configuration, though. "Retry forever" means that dirty buffers are going to cycle through submission retries and the unmount is going to hang indefinitely (on pushing the AIL). Indeed, preventing this unmount hang is the original purpose of the fail at unmount knob (commit here[1]).

IOW, we don't get to xfs_wait_buftarg() in that scenario until all dirty buffers are either written back successfully or the error configuration changes to process the failures as permanent errors and shuts down the fs. This can be confirmed easily with the buffer I/O error injection patch (use a value of 1 to simulate persistent errors).

Brian

[1] e6b3bb78962e6 ("xfs: add "fail at unmount" error handling configuration")

Quoted 7 lines

Cheers,

Dave.

Signature · 2 lines
Dave Chinner
[email protected]
#35 lore raw
Quoted 29 lines · Brian Foster
Quoted 18 lines · Dave Chinner
Quoted 9 lines · Brian Foster

Hi all,

I think everything has been reviewed to this point. Only minor changes noted below in this release. A git repo is available here[1].

The only outstanding feedback that I'm aware of is Dave's comment on patch 7 of v3 [2] regarding the shutdown assert check. I'm not aware of any means to get through xfs_wait_buftarg() with a dirty buffer that hasn't undergone the permanant error sequence and thus shut down the fs.

# echo 0 > /sys/fs/xfs/<dev>/fail_at_unmount

And now any error with a "retry forever" config (the default) will be collected by xfs_buftarg_wait() without a preceeding shutdown as xfs_buf_iodone_callback_error() will not treat it as a permanent error during unmount. i.e. this doesn't trigger:

Quoted 9 lines
        /* At unmount we may treat errors differently */
        if ((mp->m_flags & XFS_MOUNT_UNMOUNTING) && mp->m_fail_unmount)
                goto permanent_error;

and so the error handling just marks it with a write error and lets it go for a write retry in future. These are then collected in xfs_buftarg_wait() as nothing is going to retry them once unmount gets to this point...

Quoted 5 lines

That doesn't accurately describe the behavior of that configuration, though. "Retry forever" means that dirty buffers are going to cycle through submission retries and the unmount is going to hang indefinitely (on pushing the AIL). Indeed, preventing this unmount hang is the original purpose of the fail at unmount knob (commit here[1]).

So this patch is relying on something else hanging before we get to xfs_wait_buftarg and hence "we don't have to handle that here".

Please document that assumption along with the ASSERT, because if we change AIL behaviour to prevent retry-forever hangs with freeze and/or remount-ro we're going to hit this assert...

Cheers,

Dave.

Signature · 2 lines
Dave Chinner
[email protected]
#36 lore raw
Quoted 30 lines · Dave Chinner
Quoted 29 lines · Brian Foster
Quoted 27 lines · Dave Chinner
Quoted 9 lines · Brian Foster

Hi all,

I think everything has been reviewed to this point. Only minor changes noted below in this release. A git repo is available here[1].

The only outstanding feedback that I'm aware of is Dave's comment on patch 7 of v3 [2] regarding the shutdown assert check. I'm not aware of any means to get through xfs_wait_buftarg() with a dirty buffer that hasn't undergone the permanant error sequence and thus shut down the fs.

# echo 0 > /sys/fs/xfs/<dev>/fail_at_unmount

And now any error with a "retry forever" config (the default) will be collected by xfs_buftarg_wait() without a preceeding shutdown as xfs_buf_iodone_callback_error() will not treat it as a permanent error during unmount. i.e. this doesn't trigger:

        /* At unmount we may treat errors differently */
        if ((mp->m_flags & XFS_MOUNT_UNMOUNTING) && mp->m_fail_unmount)
                goto permanent_error;

and so the error handling just marks it with a write error and lets it go for a write retry in future. These are then collected in xfs_buftarg_wait() as nothing is going to retry them once unmount gets to this point...

Quoted 9 lines
Quoted 5 lines

That doesn't accurately describe the behavior of that configuration, though. "Retry forever" means that dirty buffers are going to cycle through submission retries and the unmount is going to hang indefinitely (on pushing the AIL). Indeed, preventing this unmount hang is the original purpose of the fail at unmount knob (commit here[1]).

So this patch is relying on something else hanging before we get to xfs_wait_buftarg and hence "we don't have to handle that here".

Yes, though it's the existing code that relies on the external push to block until everything is written back or a permanent error is issued. This patch just splits up and rate limits a warning message. I added the assert because of the previous discussion around making sure this situation is handled properly and because that error processing dependency is not obvious.

Quoted 4 lines

Please document that assumption along with the ASSERT, because if we change AIL behaviour to prevent retry-forever hangs with freeze and/or remount-ro we're going to hit this assert...

Sure, I'll add a comment..

Brian

Quoted 7 lines

Cheers,

Dave.

Signature · 2 lines
Dave Chinner
[email protected]