Skip to contentSkip to conversation

arm64: Add support for Amlogic SM1 SoC Family

PATCH In review Neil Armstrong 4 participants 13 messages Aug 20, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover arm64: Add support for Amlogic SM1 SoC Family

The new Amlogic SM1 SoC Family is a derivative of the Amlogic G12A SoC Family, with the following changes :
- Cortex-A55 cores instead of A53
- more power domains, including USB & PCIe
- a neural network co-processor (NNA)
- a CSI input and image processor
- some changes in the audio complex, thus not yet enabled
- new clocks, for NNA, CSI and a clock tree for each CPU Core

This serie does not add support for NNA, CSI, Audio, USB, Display or DVFS, it only aligns with the current G12A Support.

With this serie, the SEI610 Board has supported :
- Default-boot CPU frequency
- Ethernet
- LEDs
- IR
- GPIO Buttons
- eMMC
- SDCard
- SDIO WiFi
- UART Bluetooth

Audio (HDMI, Embedded HP, MIcs), USB, HDMI, IR Output, & RGB Led would be supported in following patchsets.

Dependencies:
- g12-common.dtsi from the DVFS patchset at [1]

Changes from rfc at [2]:
- Removed Power domain patches & display/USB support, will resend separately
- Removed applied AO-CEC patches
- Fixed clk-measure IDs
- Collected reviewed-by tags

[1] https://patchwork.kernel.org/cover/11025309/
[2] https://patchwork.kernel.org/cover/11025511/

Neil Armstrong (6):
soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs
dt-bindings: soc: amlogic: clk-measure: Add SM1 compatible
soc: amlogic: clk-measure: Add support for SM1
dt-bindings: arm: amlogic: add SM1 bindings
dt-bindings: arm: amlogic: add SEI Robotics SEI610 bindings
arm64: dts: add support for SM1 based SEI Robotics SEI610

 .../devicetree/bindings/arm/amlogic.yaml      |   5 +
 .../bindings/soc/amlogic/clk-measure.txt      |   1 +
 arch/arm64/boot/dts/amlogic/Makefile          |   1 +
 .../boot/dts/amlogic/meson-sm1-sei610.dts     | 300 ++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi    |  68 ++++
 drivers/soc/amlogic/meson-clk-measure.c       | 134 ++++++++
 drivers/soc/amlogic/meson-gx-socinfo.c        |   2 +
 7 files changed, 511 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
Signature · 1 line
2.22.0
#1 lore raw

PATCH 1/6 soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs

Add the SoC IDs for the S905X3 Amlogic SM1 SoC.

---
 drivers/soc/amlogic/meson-gx-socinfo.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/soc/amlogic/meson-gx-socinfo.c +2 -0
index ff86a75939e8..b9f4c6f4fd03 100644
@@ -39,6 +39,7 @@ static const struct meson_gx_soc_id {
 	{ "TXHD", 0x27 },
 	{ "G12A", 0x28 },
 	{ "G12B", 0x29 },
+	{ "SM1", 0x2b },
 };
 
 static const struct meson_gx_package_id {
@@ -66,6 +67,7 @@ static const struct meson_gx_package_id {
 	{ "S905X2", 0x28, 0x40, 0xf0 },
 	{ "S922X", 0x29, 0x40, 0xf0 },
 	{ "A311D", 0x29, 0x10, 0xf0 },
+	{ "S905X3", 0x2b, 0x5, 0xf },
 };
 
 static inline unsigned int socinfo_to_major(u32 socinfo)
Signature · 1 line
2.22.0
#2 lore raw

PATCH 2/6 dt-bindings: soc: amlogic: clk-measure: Add SM1 compatible

In reply to Neil Armstrong

Add the Amlogic SM1 Compatible for the clk-measurer IP.

---
 Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt +1 -0
index 6bf6b43f8dd8..3dd563cec794 100644
@@ -11,6 +11,7 @@ Required properties:
 			"amlogic,meson8b-clk-measure" for Meson8b SoCs
 			"amlogic,meson-axg-clk-measure" for AXG SoCs
 			"amlogic,meson-g12a-clk-measure" for G12a SoCs
+			"amlogic,meson-sm1-clk-measure" for SM1 SoCs
 - reg: base address and size of the Clock Measurer register space.
 
 Example:
Signature · 1 line
2.22.0
#3 lore raw

PATCH 3/6 soc: amlogic: clk-measure: Add support for SM1

In reply to Neil Armstrong

Add the clk-measurer clocks IDs for the Amlogic SM1 SoC family.

---
 drivers/soc/amlogic/meson-clk-measure.c | 134 ++++++++++++++++++++++++
 1 file changed, 134 insertions(+)
drivers/soc/amlogic/meson-clk-measure.c +134 -0
index f09b404b39d3..0fa47d77577d 100644
@@ -357,6 +357,136 @@ static struct meson_msr_id clk_msr_g12a[CLK_MSR_MAX] = {
 	CLK_MSR_ID(122, "audio_pdm_dclk"),
 };
 
+static struct meson_msr_id clk_msr_sm1[CLK_MSR_MAX] = {
+	CLK_MSR_ID(0, "ring_osc_out_ee_0"),
+	CLK_MSR_ID(1, "ring_osc_out_ee_1"),
+	CLK_MSR_ID(2, "ring_osc_out_ee_2"),
+	CLK_MSR_ID(3, "ring_osc_out_ee_3"),
+	CLK_MSR_ID(4, "gp0_pll"),
+	CLK_MSR_ID(5, "gp1_pll"),
+	CLK_MSR_ID(6, "enci"),
+	CLK_MSR_ID(7, "clk81"),
+	CLK_MSR_ID(8, "encp"),
+	CLK_MSR_ID(9, "encl"),
+	CLK_MSR_ID(10, "vdac"),
+	CLK_MSR_ID(11, "eth_tx"),
+	CLK_MSR_ID(12, "hifi_pll"),
+	CLK_MSR_ID(13, "mod_tcon"),
+	CLK_MSR_ID(14, "fec_0"),
+	CLK_MSR_ID(15, "fec_1"),
+	CLK_MSR_ID(16, "fec_2"),
+	CLK_MSR_ID(17, "sys_pll_div16"),
+	CLK_MSR_ID(18, "sys_cpu_div16"),
+	CLK_MSR_ID(19, "lcd_an_ph2"),
+	CLK_MSR_ID(20, "rtc_osc_out"),
+	CLK_MSR_ID(21, "lcd_an_ph3"),
+	CLK_MSR_ID(22, "eth_phy_ref"),
+	CLK_MSR_ID(23, "mpll_50m"),
+	CLK_MSR_ID(24, "eth_125m"),
+	CLK_MSR_ID(25, "eth_rmii"),
+	CLK_MSR_ID(26, "sc_int"),
+	CLK_MSR_ID(27, "in_mac"),
+	CLK_MSR_ID(28, "sar_adc"),
+	CLK_MSR_ID(29, "pcie_inp"),
+	CLK_MSR_ID(30, "pcie_inn"),
+	CLK_MSR_ID(31, "mpll_test_out"),
+	CLK_MSR_ID(32, "vdec"),
+	CLK_MSR_ID(34, "eth_mpll_50m"),
+	CLK_MSR_ID(35, "mali"),
+	CLK_MSR_ID(36, "hdmi_tx_pixel"),
+	CLK_MSR_ID(37, "cdac"),
+	CLK_MSR_ID(38, "vdin_meas"),
+	CLK_MSR_ID(39, "bt656"),
+	CLK_MSR_ID(40, "arm_ring_osc_out_4"),
+	CLK_MSR_ID(41, "eth_rx_or_rmii"),
+	CLK_MSR_ID(42, "mp0_out"),
+	CLK_MSR_ID(43, "fclk_div5"),
+	CLK_MSR_ID(44, "pwm_b"),
+	CLK_MSR_ID(45, "pwm_a"),
+	CLK_MSR_ID(46, "vpu"),
+	CLK_MSR_ID(47, "ddr_dpll_pt"),
+	CLK_MSR_ID(48, "mp1_out"),
+	CLK_MSR_ID(49, "mp2_out"),
+	CLK_MSR_ID(50, "mp3_out"),
+	CLK_MSR_ID(51, "sd_emmc_c"),
+	CLK_MSR_ID(52, "sd_emmc_b"),
+	CLK_MSR_ID(53, "sd_emmc_a"),
+	CLK_MSR_ID(54, "vpu_clkc"),
+	CLK_MSR_ID(55, "vid_pll_div_out"),
+	CLK_MSR_ID(56, "wave420l_a"),
+	CLK_MSR_ID(57, "wave420l_c"),
+	CLK_MSR_ID(58, "wave420l_b"),
+	CLK_MSR_ID(59, "hcodec"),
+	CLK_MSR_ID(60, "arm_ring_osc_out_5"),
+	CLK_MSR_ID(61, "gpio_msr"),
+	CLK_MSR_ID(62, "hevcb"),
+	CLK_MSR_ID(63, "dsi_meas"),
+	CLK_MSR_ID(64, "spicc_1"),
+	CLK_MSR_ID(65, "spicc_0"),
+	CLK_MSR_ID(66, "vid_lock"),
+	CLK_MSR_ID(67, "dsi_phy"),
+	CLK_MSR_ID(68, "hdcp22_esm"),
+	CLK_MSR_ID(69, "hdcp22_skp"),
+	CLK_MSR_ID(70, "pwm_f"),
+	CLK_MSR_ID(71, "pwm_e"),
+	CLK_MSR_ID(72, "pwm_d"),
+	CLK_MSR_ID(73, "pwm_c"),
+	CLK_MSR_ID(74, "arm_ring_osc_out_6"),
+	CLK_MSR_ID(75, "hevcf"),
+	CLK_MSR_ID(76, "arm_ring_osc_out_7"),
+	CLK_MSR_ID(77, "rng_ring_osc_0"),
+	CLK_MSR_ID(78, "rng_ring_osc_1"),
+	CLK_MSR_ID(79, "rng_ring_osc_2"),
+	CLK_MSR_ID(80, "rng_ring_osc_3"),
+	CLK_MSR_ID(81, "vapb"),
+	CLK_MSR_ID(82, "ge2d"),
+	CLK_MSR_ID(83, "co_rx"),
+	CLK_MSR_ID(84, "co_tx"),
+	CLK_MSR_ID(85, "arm_ring_osc_out_8"),
+	CLK_MSR_ID(86, "arm_ring_osc_out_9"),
+	CLK_MSR_ID(87, "mipi_dsi_phy"),
+	CLK_MSR_ID(88, "cis2_adapt"),
+	CLK_MSR_ID(89, "hdmi_todig"),
+	CLK_MSR_ID(90, "hdmitx_sys"),
+	CLK_MSR_ID(91, "nna_core"),
+	CLK_MSR_ID(92, "nna_axi"),
+	CLK_MSR_ID(93, "vad"),
+	CLK_MSR_ID(94, "eth_phy_rx"),
+	CLK_MSR_ID(95, "eth_phy_pll"),
+	CLK_MSR_ID(96, "vpu_b"),
+	CLK_MSR_ID(97, "cpu_b_tmp"),
+	CLK_MSR_ID(98, "ts"),
+	CLK_MSR_ID(99, "arm_ring_osc_out_10"),
+	CLK_MSR_ID(100, "arm_ring_osc_out_11"),
+	CLK_MSR_ID(101, "arm_ring_osc_out_12"),
+	CLK_MSR_ID(102, "arm_ring_osc_out_13"),
+	CLK_MSR_ID(103, "arm_ring_osc_out_14"),
+	CLK_MSR_ID(104, "arm_ring_osc_out_15"),
+	CLK_MSR_ID(105, "arm_ring_osc_out_16"),
+	CLK_MSR_ID(106, "ephy_test"),
+	CLK_MSR_ID(107, "au_dac_g128x"),
+	CLK_MSR_ID(108, "audio_locker_out"),
+	CLK_MSR_ID(109, "audio_locker_in"),
+	CLK_MSR_ID(110, "audio_tdmout_c_sclk"),
+	CLK_MSR_ID(111, "audio_tdmout_b_sclk"),
+	CLK_MSR_ID(112, "audio_tdmout_a_sclk"),
+	CLK_MSR_ID(113, "audio_tdmin_lb_sclk"),
+	CLK_MSR_ID(114, "audio_tdmin_c_sclk"),
+	CLK_MSR_ID(115, "audio_tdmin_b_sclk"),
+	CLK_MSR_ID(116, "audio_tdmin_a_sclk"),
+	CLK_MSR_ID(117, "audio_resample"),
+	CLK_MSR_ID(118, "audio_pdm_sys"),
+	CLK_MSR_ID(119, "audio_spdifout_b"),
+	CLK_MSR_ID(120, "audio_spdifout"),
+	CLK_MSR_ID(121, "audio_spdifin"),
+	CLK_MSR_ID(122, "audio_pdm_dclk"),
+	CLK_MSR_ID(123, "audio_resampled"),
+	CLK_MSR_ID(124, "earcrx_pll"),
+	CLK_MSR_ID(125, "earcrx_pll_test"),
+	CLK_MSR_ID(126, "csi_phy0"),
+	CLK_MSR_ID(127, "csi2_data"),
+};
+
 static int meson_measure_id(struct meson_msr_id *clk_msr_id,
 			       unsigned int duration)
 {
@@ -545,6 +675,10 @@ static const struct of_device_id meson_msr_match_table[] = {
 		.compatible = "amlogic,meson-g12a-clk-measure",
 		.data = (void *)clk_msr_g12a,
 	},
+	{
+		.compatible = "amlogic,meson-sm1-clk-measure",
+		.data = (void *)clk_msr_sm1,
+	},
 	{ /* sentinel */ }
 };
 
Signature · 1 line
2.22.0
#4 lore raw

PATCH 4/6 dt-bindings: arm: amlogic: add SM1 bindings

In reply to Neil Armstrong

Add bindings for the new Amlogic SM1 SoC Family.

It a derivative of the G12A SoC Family with :
- Cortex-A55 core instead of A53
- more power domains
- a neural network co-processor
- a CSI input and image processor

---
 Documentation/devicetree/bindings/arm/amlogic.yaml | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/arm/amlogic.yaml +3 -0
index 96f66911e3c6..d701e8447363 100644
@@ -150,4 +150,7 @@ properties:
           - const: amlogic,s922x
           - const: amlogic,g12b
 
+      - description: Boards with the Amlogic Meson SM1 S905X3 SoC
+        items:
+          - const: amlogic,sm1
 ...
Signature · 1 line
2.22.0
maintainer Reviewed-by on v1 4/6
#5 lore raw

Re: [PATCH 4/6] dt-bindings: arm: amlogic: add SM1 bindings

Quoted 9 lines · Neil Armstrong

Add bindings for the new Amlogic SM1 SoC Family.

It a derivative of the G12A SoC Family with :
- Cortex-A55 core instead of A53
- more power domains
- a neural network co-processor
- a CSI input and image processor

Quoted 4 lines
---
 Documentation/devicetree/bindings/arm/amlogic.yaml | 3 +++
 1 file changed, 3 insertions(+)
#6 lore raw

PATCH 5/6 dt-bindings: arm: amlogic: add SEI Robotics SEI610 bindings

In reply to Neil Armstrong

Add the compatible for the Amlogic SM1 Based SEI610 board.

---
 Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++
 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/arm/amlogic.yaml +2 -0
index d701e8447363..b48ea1e4913a 100644
@@ -152,5 +152,7 @@ properties:
 
       - description: Boards with the Amlogic Meson SM1 S905X3 SoC
         items:
+          - enum:
+              - seirobotics,sei610
           - const: amlogic,sm1
 ...
Signature · 1 line
2.22.0
#8 lore raw

PATCH 6/6 arm64: dts: add support for SM1 based SEI Robotics SEI610

In reply to Neil Armstrong

Add support for the Amlogic SM1 Based SEI610 board.

The SM1 SoC is a derivative of the G12A SoC Family with :
- Cortex-A55 core instead of A53
- more power domains, including USB & PCIe
- a neural network co-processor (NNA)
- a CSI input and image processor
- some changes in the audio complex, thus not yet enabled

The SEI610 board is a derivative of the SEI510 board with :
- removed ADC based touch button, replaced with 3x GPIO buttons
- physical switch disabling on-board MICs
- USB-C port for USB 2.0 OTG
- On-board FTDI USB2SERIAL port for Linux console

Audio, Display and USB support will be added later when support of the corresponding power domains will be added, for now they are kept disabled.

---
 arch/arm64/boot/dts/amlogic/Makefile          |   1 +
 .../boot/dts/amlogic/meson-sm1-sei610.dts     | 300 ++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi    |  68 ++++
 3 files changed, 369 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
arch/arm64/boot/dts/amlogic/Makefile +1 -0
index ae5e8d0c08da..edbf128e7707 100644
@@ -34,3 +34,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts new file +300 -0

300 lines not on this page · raw message

arch/arm64/boot/dts/amlogic/meson-sm1.dtsi new file +68 -0

68 lines not on this page · raw message

Signature · 1 line
2.22.0
reviewer Acked-by on v1 6/6
#9 lore raw

Re: [PATCH 6/6] arm64: dts: add support for SM1 based SEI Robotics SEI610

Hi Neil,

Quoted 16 lines · Neil Armstrong

Add support for the Amlogic SM1 Based SEI610 board.

The SM1 SoC is a derivative of the G12A SoC Family with :
- Cortex-A55 core instead of A53
- more power domains, including USB & PCIe
- a neural network co-processor (NNA)
- a CSI input and image processor
- some changes in the audio complex, thus not yet enabled

The SEI610 board is a derivative of the SEI510 board with :
- removed ADC based touch button, replaced with 3x GPIO buttons
- physical switch disabling on-board MICs
- USB-C port for USB 2.0 OTG
- On-board FTDI USB2SERIAL port for Linux console

Quoted 4 lines

Audio, Display and USB support will be added later when support of the corresponding power domains will be added, for now they are kept disabled.

I don't have any details about this board but overall this looks sane, so:

[...]

arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts line 117

Quoted 2 lines
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts new file +2 -0
+       /* Used by Tuner, RGB Led & IR Emitter LED array */
+       vddao_3v3_t: regultor-vddao_3v3_t {

that should be regulator-vddao_3v3_t - maybe Kevin can fix this up, if not then we can still fix it with a follow-up patch

Martin

_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic

maintainer
#10 lore raw

Re: [PATCH 6/6] arm64: dts: add support for SM1 based SEI Robotics SEI610

Quoted 23 lines · Martin Blumenstingl

Hi Neil,

Quoted 16 lines · Neil Armstrong

Add support for the Amlogic SM1 Based SEI610 board.

The SM1 SoC is a derivative of the G12A SoC Family with :
- Cortex-A55 core instead of A53
- more power domains, including USB & PCIe
- a neural network co-processor (NNA)
- a CSI input and image processor
- some changes in the audio complex, thus not yet enabled

The SEI610 board is a derivative of the SEI510 board with :
- removed ADC based touch button, replaced with 3x GPIO buttons
- physical switch disabling on-board MICs
- USB-C port for USB 2.0 OTG
- On-board FTDI USB2SERIAL port for Linux console

Quoted 4 lines

Audio, Display and USB support will be added later when support of the corresponding power domains will be added, for now they are kept disabled.

Quoted 8 lines

I don't have any details about this board but overall this looks sane, so:

[...]

arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts line 117

Quoted 2 lines
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts new file +2 -0
+       /* Used by Tuner, RGB Led & IR Emitter LED array */
+       vddao_3v3_t: regultor-vddao_3v3_t {

that should be regulator-vddao_3v3_t - maybe Kevin can fix this up, if not then we can still fix it with a follow-up patch

I fixed it up while applying,

Kevin

maintainer
#11 lore raw
In reply to Neil Armstrong
Quoted 29 lines · Neil Armstrong

The new Amlogic SM1 SoC Family is a derivative of the Amlogic G12A SoC Family, with the following changes :
- Cortex-A55 cores instead of A53
- more power domains, including USB & PCIe
- a neural network co-processor (NNA)
- a CSI input and image processor
- some changes in the audio complex, thus not yet enabled
- new clocks, for NNA, CSI and a clock tree for each CPU Core

This serie does not add support for NNA, CSI, Audio, USB, Display or DVFS, it only aligns with the current G12A Support.

With this serie, the SEI610 Board has supported :
- Default-boot CPU frequency
- Ethernet
- LEDs
- IR
- GPIO Buttons
- eMMC
- SDCard
- SDIO WiFi
- UART Bluetooth

Audio (HDMI, Embedded HP, MIcs), USB, HDMI, IR Output, & RGB Led would be supported in following patchsets.

Dependencies:
- g12-common.dtsi from the DVFS patchset at [1]

Quoted 8 lines

Changes from rfc at [2]:
- Removed Power domain patches & display/USB support, will resend separately
- Removed applied AO-CEC patches
- Fixed clk-measure IDs
- Collected reviewed-by tags

[1] https://patchwork.kernel.org/cover/11025309/
[2] https://patchwork.kernel.org/cover/11025511/

Series queued for v5.4...

Quoted 4 lines

Neil Armstrong (6):
soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs
dt-bindings: soc: amlogic: clk-measure: Add SM1 compatible
soc: amlogic: clk-measure: Add support for SM1

... these 3 in v5.4/drivers ...

Quoted 3 lines

dt-bindings: arm: amlogic: add SM1 bindings
dt-bindings: arm: amlogic: add SEI Robotics SEI610 bindings
arm64: dts: add support for SM1 based SEI Robotics SEI610

... and these 3 in v5.4/dt64 with Rob's tag.

Thanks,

Kevin

maintainer Tested-by
#12 lore raw
Quoted 46 lines · Kevin Hilman
Quoted 29 lines · Neil Armstrong

The new Amlogic SM1 SoC Family is a derivative of the Amlogic G12A SoC Family, with the following changes :
- Cortex-A55 cores instead of A53
- more power domains, including USB & PCIe
- a neural network co-processor (NNA)
- a CSI input and image processor
- some changes in the audio complex, thus not yet enabled
- new clocks, for NNA, CSI and a clock tree for each CPU Core

This serie does not add support for NNA, CSI, Audio, USB, Display or DVFS, it only aligns with the current G12A Support.

With this serie, the SEI610 Board has supported :
- Default-boot CPU frequency
- Ethernet
- LEDs
- IR
- GPIO Buttons
- eMMC
- SDCard
- SDIO WiFi
- UART Bluetooth

Audio (HDMI, Embedded HP, MIcs), USB, HDMI, IR Output, & RGB Led would be supported in following patchsets.

Dependencies:
- g12-common.dtsi from the DVFS patchset at [1]

Quoted 8 lines

Changes from rfc at [2]:
- Removed Power domain patches & display/USB support, will resend separately
- Removed applied AO-CEC patches
- Fixed clk-measure IDs
- Collected reviewed-by tags

[1] https://patchwork.kernel.org/cover/11025309/
[2] https://patchwork.kernel.org/cover/11025511/

Series queued for v5.4...

Quoted 4 lines

Neil Armstrong (6):
soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs
dt-bindings: soc: amlogic: clk-measure: Add SM1 compatible
soc: amlogic: clk-measure: Add support for SM1

Quoted 7 lines

... these 3 in v5.4/drivers ...

Quoted 3 lines

dt-bindings: arm: amlogic: add SM1 bindings
dt-bindings: arm: amlogic: add SEI Robotics SEI610 bindings
arm64: dts: add support for SM1 based SEI Robotics SEI610

... and these 3 in v5.4/dt64 with Rob's tag.

And I forgot to add that I boot-tested this on an SEI610 as well.

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel