Skip to contentSkip to conversation

Various error handling fixes and cleanups

PATCH In review Markus Armbruster 13 participants 51 messages Jul 20, 2021 – Aug 31, 2021

lore
Share & tools
lore
#0 lore raw

cover Various error handling fixes and cleanups

I doubt the fixes are 6.1 material at this late stage. If you disagree, let me know.

Cc Alex Williamson <[email protected]>
Cc Aravinda Prasad <[email protected]>
Cc Cornelia Huck <[email protected]>
Cc Daniel P. Berrangé <[email protected]>
Cc David Gibson <[email protected]>
Cc Dr. David Alan Gilbert <[email protected]>
Cc Eduardo Habkost <[email protected]>
Cc Elena Ufimtseva <[email protected]>
Cc Ganesh Goudar <[email protected]>
Cc Gerd Hoffmann <[email protected]>
Cc Jagannathan Raman <[email protected]>
Cc John G Johnson <[email protected]>
Cc Juan Quintela <[email protected]>
Cc Kamil Rytarowski <[email protected]>
Cc Kevin Wolf <[email protected]>
Cc Kirti Wankhede <[email protected]>
Cc Marc-André Lureau <[email protected]>
Cc Marcelo Tosatti <[email protected]>
Cc Michael S. Tsirkin <[email protected]>
Cc Paolo Bonzini <[email protected]>
Cc Peter Xu <[email protected]>
Cc Reinoud Zandijk <[email protected]>
Cc Sergio Lopez <[email protected]>
Cc Stefan Hajnoczi <[email protected]>
Cc Sunil Muthuswamy <[email protected]>
Cc Thomas Huth <[email protected]>

Markus Armbruster (16):
error: Use error_fatal to simplify obvious fatal errors (again)
spapr: Plug memory leak when we can't add a migration blocker
spapr: Explain purpose of ->fwnmi_migration_blocker more clearly
multi-process: Fix pci_proxy_dev_realize() error handling
vhost-scsi: Plug memory leak on migrate_add_blocker() failure
i386: Never free migration blocker objects instead of sometimes
vfio: Avoid error_propagate() after migrate_add_blocker() whpx nvmm: Drop useless migrate_del_blocker()
migration: Unify failure check for migrate_add_blocker()
migration: Handle migration_incoming_setup() errors consistently
microvm: Drop dead error handling in microvm_machine_state_init()
vhost: Clean up how VhostOpts method vhost_get_config() fails
vhost: Clean up how VhostOpts method vhost_backend_init() fails Remove superfluous ERRP_GUARD()
vl: Clean up -smp error handling
vl: Don't continue after -smp help.

 backends/tpm/tpm_emulator.c |  3 +--
 hw/display/qxl.c            |  8 ++++----
 hw/i386/microvm.c           |  5 -----
 hw/ppc/spapr_events.c       | 20 ++++++++++----------
 hw/remote/mpqemu-link.c     |  3 ---
 hw/remote/proxy.c           | 10 +++++++++-
 hw/s390x/ipl.c              |  6 +-----
 hw/scsi/vhost-scsi.c        |  4 ++--
 hw/vfio/migration.c         |  6 ++----
 hw/virtio/vhost-user.c      |  8 ++++++++
 hw/virtio/vhost.c           | 16 +++-------------
 migration/migration.c       | 34 ++++++++++------------------------
 qemu-img.c                  |  6 +-----
 qemu-io.c                   |  6 +-----
 qemu-nbd.c                  |  5 +----
 qga/commands-posix-ssh.c    | 17 -----------------
 qga/commands-win32.c        |  1 -
 scsi/qemu-pr-helper.c       | 11 +++--------
 softmmu/vl.c                | 19 +++++++------------
 target/i386/kvm/kvm.c       |  9 +++------
 target/i386/nvmm/nvmm-all.c |  4 +---
 target/i386/sev.c           |  8 +-------
 target/i386/whpx/whpx-all.c |  4 +---
 ui/console.c                |  7 ++-----
 ui/spice-core.c             |  7 +------
 25 files changed, 72 insertions(+), 155 deletions(-)
Signature · 1 line
2.31.1
#1 lore raw

PATCH 1/16 error: Use error_fatal to simplify obvious fatal errors (again)

We did this with scripts/coccinelle/use-error_fatal.cocci before, in commit 50beeb68094 and 007b06578ab. This commit cleans up rarer variations that don't seem worth matching with Coccinelle.

Cc Thomas Huth <[email protected]>
Cc Cornelia Huck <[email protected]>
Cc Peter Xu <[email protected]>
Cc Juan Quintela <[email protected]>
Cc Stefan Hajnoczi <[email protected]>
Cc Paolo Bonzini <[email protected]>
Cc Marc-André Lureau <[email protected]>
Cc Gerd Hoffmann <[email protected]>
Cc Daniel P. Berrangé <[email protected]>
---
 hw/s390x/ipl.c        |  6 +-----
 migration/migration.c |  7 +------
 qemu-img.c            |  6 +-----
 qemu-io.c             |  6 +-----
 qemu-nbd.c            |  5 +----
 scsi/qemu-pr-helper.c | 11 +++--------
 softmmu/vl.c          |  7 +------
 target/i386/sev.c     |  8 +-------
 ui/console.c          |  6 ++----
 ui/spice-core.c       |  7 +------
 10 files changed, 13 insertions(+), 56 deletions(-)
hw/s390x/ipl.c +1 -5
index 8c863cf386..1821c6faee 100644
@@ -711,7 +711,6 @@ int s390_ipl_pv_unpack(void)
 void s390_ipl_prepare_cpu(S390CPU *cpu)
 {
     S390IPLState *ipl = get_ipl_device();
-    Error *err = NULL;
 
     cpu->env.psw.addr = ipl->start_addr;
     cpu->env.psw.mask = IPL_PSW_MASK;
@@ -723,10 +722,7 @@ void s390_ipl_prepare_cpu(S390CPU *cpu)
         }
     }
     if (ipl->netboot) {
-        if (load_netboot_image(&err) < 0) {
-            error_report_err(err);
-            exit(1);
-        }
+        load_netboot_image(&error_fatal);
         ipl->qipl.netboot_start_addr = cpu_to_be64(ipl->start_addr);
     }
     s390_ipl_set_boot_menu(ipl);
migration/migration.c +1 -6
index 2d306582eb..231dc24414 100644
@@ -187,8 +187,6 @@ static gint page_request_addr_cmp(gconstpointer ap, gconstpointer bp)
 
 void migration_object_init(void)
 {
-    Error *err = NULL;
-
     /* This can only be called once. */
     assert(!current_migration);
     current_migration = MIGRATION_OBJ(object_new(TYPE_MIGRATION));
@@ -209,10 +207,7 @@ void migration_object_init(void)
     qemu_mutex_init(&current_incoming->page_request_mutex);
     current_incoming->page_requested = g_tree_new(page_request_addr_cmp);
 
-    if (!migration_object_check(current_migration, &err)) {
-        error_report_err(err);
-        exit(1);
-    }
+    migration_object_check(current_migration, &error_fatal);
 
     blk_mig_init();
     ram_mig_init();
qemu-img.c +1 -5
index 797742a443..e0b438182e 100644
@@ -5310,7 +5310,6 @@ int main(int argc, char **argv)
 {
     const img_cmd_t *cmd;
     const char *cmdname;
-    Error *local_error = NULL;
     int c;
     static const struct option long_options[] = {
         {"help", no_argument, 0, 'h'},
@@ -5328,10 +5327,7 @@ int main(int argc, char **argv)
     module_call_init(MODULE_INIT_TRACE);
     qemu_init_exec_dir(argv[0]);
 
-    if (qemu_init_main_loop(&local_error)) {
-        error_report_err(local_error);
-        exit(EXIT_FAILURE);
-    }
+    qemu_init_main_loop(&error_fatal);
 
     qcrypto_init(&error_fatal);
 
qemu-io.c +1 -5
index 57f07501df..3924639b92 100644
@@ -529,7 +529,6 @@ int main(int argc, char **argv)
     int flags = BDRV_O_UNMAP;
     int ret;
     bool writethrough = true;
-    Error *local_error = NULL;
     QDict *opts = NULL;
     const char *format = NULL;
     bool force_share = false;
@@ -629,10 +628,7 @@ int main(int argc, char **argv)
         exit(1);
     }
 
-    if (qemu_init_main_loop(&local_error)) {
-        error_report_err(local_error);
-        exit(1);
-    }
+    qemu_init_main_loop(&error_fatal);
 
     if (!trace_init_backends()) {
         exit(1);
qemu-nbd.c +1 -4
index 26ffbf15af..65ebec598f 100644
@@ -963,10 +963,7 @@ int main(int argc, char **argv)
         }
     }
 
-    if (qemu_init_main_loop(&local_err)) {
-        error_report_err(local_err);
-        exit(EXIT_FAILURE);
-    }
+    qemu_init_main_loop(&error_fatal);
     bdrv_init();
     atexit(qemu_nbd_shutdown);
 
scsi/qemu-pr-helper.c +3 -8
index 7b9389b47b..f281daeced 100644
@@ -1044,10 +1044,7 @@ int main(int argc, char **argv)
         }
     }
 
-    if (qemu_init_main_loop(&local_err)) {
-        error_report_err(local_err);
-        exit(EXIT_FAILURE);
-    }
+    qemu_init_main_loop(&error_fatal);
 
     server_watch = qio_channel_add_watch(QIO_CHANNEL(server_ioc),
                                          G_IO_IN,
@@ -1061,10 +1058,8 @@ int main(int argc, char **argv)
         }
     }
 
-    if ((daemonize || pidfile_specified) &&
-        !qemu_write_pidfile(pidfile, &local_err)) {
-        error_report_err(local_err);
-        exit(EXIT_FAILURE);
+    if (daemonize || pidfile_specified) {
+        qemu_write_pidfile(pidfile, &error_fatal);
     }
 
 #ifdef CONFIG_LIBCAP_NG
softmmu/vl.c +1 -6
index 4df1496101..0d2db1abc3 100644
@@ -2673,12 +2673,7 @@ void qmp_x_exit_preconfig(Error **errp)
     qemu_machine_creation_done();
 
     if (loadvm) {
-        Error *local_err = NULL;
-        if (!load_snapshot(loadvm, NULL, false, NULL, &local_err)) {
-            error_report_err(local_err);
-            autostart = 0;
-            exit(1);
-        }
+        load_snapshot(loadvm, NULL, false, NULL, &error_fatal);
     }
     if (replay_mode != REPLAY_MODE_NONE) {
         replay_vmstate_init();
target/i386/sev.c +1 -7
index 83df8c09f6..0b2c8f594a 100644
@@ -737,7 +737,6 @@ static void
 sev_launch_finish(SevGuestState *sev)
 {
     int ret, error;
-    Error *local_err = NULL;
 
     trace_kvm_sev_launch_finish();
     ret = sev_ioctl(sev->sev_fd, KVM_SEV_LAUNCH_FINISH, 0, &error);
@@ -752,12 +751,7 @@ sev_launch_finish(SevGuestState *sev)
     /* add migration blocker */
     error_setg(&sev_mig_blocker,
                "SEV: Migration is not implemented");
-    ret = migrate_add_blocker(sev_mig_blocker, &local_err);
-    if (local_err) {
-        error_report_err(local_err);
-        error_free(sev_mig_blocker);
-        exit(1);
-    }
+    migrate_add_blocker(sev_mig_blocker, &error_fatal);
 }
 
 static void
ui/console.c +2 -4
index 1103b65314..5d2e6178ff 100644
@@ -1508,7 +1508,6 @@ void register_displaychangelistener(DisplayChangeListener *dcl)
         "This VM has no graphic display device.";
     static DisplaySurface *dummy;
     QemuConsole *con;
-    Error *err = NULL;
 
     assert(!dcl->ds);
 
@@ -1523,9 +1522,8 @@ void register_displaychangelistener(DisplayChangeListener *dcl)
         dcl->con->gl = dcl;
     }
 
-    if (dcl->con && !dpy_compatible_with(dcl->con, dcl, &err)) {
-        error_report_err(err);
-        exit(1);
+    if (dcl->con) {
+        dpy_compatible_with(dcl->con, dcl, &error_fatal);
     }
 
     trace_displaychangelistener_register(dcl, dcl->ops->dpy_name);
ui/spice-core.c +1 -6
index 86d43783ac..bbd7ad070b 100644
@@ -671,18 +671,13 @@ static void qemu_spice_init(void)
     }
     passwordSecret = qemu_opt_get(opts, "password-secret");
     if (passwordSecret) {
-        Error *local_err = NULL;
         if (qemu_opt_get(opts, "password")) {
             error_report("'password' option is mutually exclusive with "
                          "'password-secret'");
             exit(1);
         }
         password = qcrypto_secret_lookup_as_utf8(passwordSecret,
-                                                 &local_err);
-        if (!password) {
-            error_report_err(local_err);
-            exit(1);
-        }
+                                                 &error_fatal);
     } else {
         str = qemu_opt_get(opts, "password");
         if (str) {
Signature · 1 line
2.31.1
Reviewed-by on v1 1/16
#2 lore raw

Re: [PATCH 01/16] error: Use error_fatal to simplify obvious fatal errors (again)

Quoted 14 lines · Markus Armbruster

We did this with scripts/coccinelle/use-error_fatal.cocci before, in commit 50beeb68094 and 007b06578ab. This commit cleans up rarer variations that don't seem worth matching with Coccinelle.

Cc Thomas Huth <[email protected]>
Cc Cornelia Huck <[email protected]>
Cc Peter Xu <[email protected]>
Cc Juan Quintela <[email protected]>
Cc Stefan Hajnoczi <[email protected]>
Cc Paolo Bonzini <[email protected]>
Cc Marc-André Lureau <[email protected]>
Cc Gerd Hoffmann <[email protected]>
Cc Daniel P. Berrangé <[email protected]>
Quoted 1 line

---

I agree with your assessment that this is not bug-fix material needed in 6.1.

Signature · 3 lines
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3266
Virtualization:  qemu.org | libvirt.org
Reviewed-by on v1 1/16
#3 lore raw

Re: [PATCH 01/16] error: Use error_fatal to simplify obvious fatal errors (again)

In reply to Markus Armbruster
Quoted 4 lines · Markus Armbruster

We did this with scripts/coccinelle/use-error_fatal.cocci before, in commit 50beeb68094 and 007b06578ab. This commit cleans up rarer variations that don't seem worth matching with Coccinelle.

Quoted 10 lines
Cc Thomas Huth <[email protected]>
Cc Cornelia Huck <[email protected]>
Cc Peter Xu <[email protected]>
Cc Juan Quintela <[email protected]>
Cc Stefan Hajnoczi <[email protected]>
Cc Paolo Bonzini <[email protected]>
Cc Marc-André Lureau <[email protected]>
Cc Gerd Hoffmann <[email protected]>
Cc Daniel P. Berrangé <[email protected]>
Signature · 1 line
Peter Xu
Reviewed-by on v1 1/16
#4 lore raw

Re: [PATCH 01/16] error: Use error_fatal to simplify obvious fatal errors (again)

In reply to Markus Armbruster
Quoted 32 lines · Markus Armbruster

We did this with scripts/coccinelle/use-error_fatal.cocci before, in commit 50beeb68094 and 007b06578ab. This commit cleans up rarer variations that don't seem worth matching with Coccinelle.

Cc Thomas Huth <[email protected]>
Cc Cornelia Huck <[email protected]>
Cc Peter Xu <[email protected]>
Cc Juan Quintela <[email protected]>
Cc Stefan Hajnoczi <[email protected]>
Cc Paolo Bonzini <[email protected]>
Cc Marc-André Lureau <[email protected]>
Cc Gerd Hoffmann <[email protected]>
Cc Daniel P. Berrangé <[email protected]>
---
 hw/s390x/ipl.c        |  6 +-----
 migration/migration.c |  7 +------
 qemu-img.c            |  6 +-----
 qemu-io.c             |  6 +-----
 qemu-nbd.c            |  5 +----
 scsi/qemu-pr-helper.c | 11 +++--------
 softmmu/vl.c          |  7 +------
 target/i386/sev.c     |  8 +-------
 ui/console.c          |  6 ++----
 ui/spice-core.c       |  7 +------
 10 files changed, 13 insertions(+), 56 deletions(-)
softmmu/vl.c +0 -0
index 4df1496101..0d2db1abc3 100644

softmmu/vl.c void qmp_x_exit_preconfig(Error **errp) · line 2679

Quoted 7 lines
softmmu/vl.c +0 -4
@@ -2673,12 +2673,7 @@ void qmp_x_exit_preconfig(Error **errp)
     qemu_machine_creation_done();
 
     if (loadvm) {
-        Error *local_err = NULL;
-        if (!load_snapshot(loadvm, NULL, false, NULL, &local_err)) {
-            error_report_err(local_err);
-            autostart = 0;

Uh, odd assignment...

softmmu/vl.c void qmp_x_exit_preconfig(Error **errp) · line 2679

Quoted 6 lines
softmmu/vl.c +1 -2
-            exit(1);
-        }
+        load_snapshot(loadvm, NULL, false, NULL, &error_fatal);
     }
     if (replay_mode != REPLAY_MODE_NONE) {
         replay_vmstate_init();
#5 lore raw

Re: [PATCH 01/16] error: Use error_fatal to simplify obvious fatal errors (again)

Quoted 35 lines · Philippe Mathieu-Daudé
Quoted 34 lines · Markus Armbruster

We did this with scripts/coccinelle/use-error_fatal.cocci before, in commit 50beeb68094 and 007b06578ab. This commit cleans up rarer variations that don't seem worth matching with Coccinelle.

Cc Thomas Huth <[email protected]>
Cc Cornelia Huck <[email protected]>
Cc Peter Xu <[email protected]>
Cc Juan Quintela <[email protected]>
Cc Stefan Hajnoczi <[email protected]>
Cc Paolo Bonzini <[email protected]>
Cc Marc-André Lureau <[email protected]>
Cc Gerd Hoffmann <[email protected]>
Cc Daniel P. Berrangé <[email protected]>
---
 hw/s390x/ipl.c        |  6 +-----
 migration/migration.c |  7 +------
 qemu-img.c            |  6 +-----
 qemu-io.c             |  6 +-----
 qemu-nbd.c            |  5 +----
 scsi/qemu-pr-helper.c | 11 +++--------
 softmmu/vl.c          |  7 +------
 target/i386/sev.c     |  8 +-------
 ui/console.c          |  6 ++----
 ui/spice-core.c       |  7 +------
 10 files changed, 13 insertions(+), 56 deletions(-)
softmmu/vl.c +0 -0
index 4df1496101..0d2db1abc3 100644
@@ -2673,12 +2673,7 @@ void qmp_x_exit_preconfig(Error **errp)
     qemu_machine_creation_done();
 
Quoted 7 lines

softmmu/vl.c void qmp_x_exit_preconfig(Error **errp) · line 2679

Quoted 5 lines
softmmu/vl.c +0 -4
     if (loadvm) {
-        Error *local_err = NULL;
-        if (!load_snapshot(loadvm, NULL, false, NULL, &local_err)) {
-            error_report_err(local_err);
-            autostart = 0;

Uh, odd assignment...

Yup.

Commit 05f2401eb2 "make load_vmstate() return errors" added the assignment:

@@ -6030,8 +6030,11 @@ int main(int argc, char **argv, char **envp)
exit(1);
}

- if (loadvm)
- load_vmstate(cur_mon, loadvm);
+ if (loadvm) {
+ if (load_vmstate(cur_mon, loadvm) < 0) {
+ autostart = 0;
+ }
+ }

if (incoming) {
qemu_start_incoming_migration(incoming);

827beacb47 "Add a hint message to loadvm and exits on failure" added the exit(1) without deleting the now useless assignment:

    @@ -4530,6 +4530,7 @@ int main(int argc, char **argv, char **envp)
             if (load_snapshot(loadvm, &local_err) < 0) {
                 error_report_err(local_err);
                 autostart = 0;
    +            exit(1);
             }
         }
Quoted 8 lines

softmmu/vl.c void qmp_x_exit_preconfig(Error **errp) · line 2679

Quoted 6 lines
softmmu/vl.c +1 -2
-            exit(1);
-        }
+        load_snapshot(loadvm, NULL, false, NULL, &error_fatal);
     }
     if (replay_mode != REPLAY_MODE_NONE) {
         replay_vmstate_init();

Thanks!

#6 lore raw

PATCH 2/16 spapr: Plug memory leak when we can't add a migration blocker

In reply to Markus Armbruster
Fixes 2500fb423adb17995485de0b4d507cf2f09e3a7f
Cc Aravinda Prasad <[email protected]>
Cc Ganesh Goudar <[email protected]>
Cc David Gibson <[email protected]>
---
 hw/ppc/spapr_events.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
hw/ppc/spapr_events.c +1 -2
index 0cfc19be19..a8f2cc6bdc 100644
@@ -872,7 +872,6 @@ void spapr_mce_req_event(PowerPCCPU *cpu, bool recovered)
     SpaprMachineState *spapr = SPAPR_MACHINE(qdev_get_machine());
     CPUState *cs = CPU(cpu);
     int ret;
-    Error *local_err = NULL;
 
     if (spapr->fwnmi_machine_check_addr == -1) {
         /* Non-FWNMI case, deliver it like an architected CPU interrupt. */
@@ -912,7 +911,7 @@ void spapr_mce_req_event(PowerPCCPU *cpu, bool recovered)
         }
     }
 
-    ret = migrate_add_blocker(spapr->fwnmi_migration_blocker, &local_err);
+    ret = migrate_add_blocker(spapr->fwnmi_migration_blocker, NULL);
     if (ret == -EBUSY) {
         /*
          * We don't want to abort so we let the migration to continue.
Signature · 1 line
2.31.1
Acked-by on v1 2/16
#7 lore raw

Re: [PATCH 02/16] spapr: Plug memory leak when we can't add a migration blocker

Quoted 5 lines · Markus Armbruster
Fixes 2500fb423adb17995485de0b4d507cf2f09e3a7f
Cc Aravinda Prasad <[email protected]>
Cc Ganesh Goudar <[email protected]>
Cc David Gibson <[email protected]>
Quoted 25 lines
---
 hw/ppc/spapr_events.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
hw/ppc/spapr_events.c +1 -2
index 0cfc19be19..a8f2cc6bdc 100644
@@ -872,7 +872,6 @@ void spapr_mce_req_event(PowerPCCPU *cpu, bool recovered)
     SpaprMachineState *spapr = SPAPR_MACHINE(qdev_get_machine());
     CPUState *cs = CPU(cpu);
     int ret;
-    Error *local_err = NULL;
 
     if (spapr->fwnmi_machine_check_addr == -1) {
         /* Non-FWNMI case, deliver it like an architected CPU interrupt. */
@@ -912,7 +911,7 @@ void spapr_mce_req_event(PowerPCCPU *cpu, bool recovered)
         }
     }
 
-    ret = migrate_add_blocker(spapr->fwnmi_migration_blocker, &local_err);
+    ret = migrate_add_blocker(spapr->fwnmi_migration_blocker, NULL);
     if (ret == -EBUSY) {
         /*
          * We don't want to abort so we let the migration to continue.
Signature · 4 lines
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson
Reviewed-by on v1 2/16
#8 lore raw

Re: [PATCH 02/16] spapr: Plug memory leak when we can't add a migration blocker

In reply to Markus Armbruster
Quoted 8 lines · Markus Armbruster
Fixes 2500fb423adb17995485de0b4d507cf2f09e3a7f
Cc Aravinda Prasad <[email protected]>
Cc Ganesh Goudar <[email protected]>
Cc David Gibson <[email protected]>
---
 hw/ppc/spapr_events.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
#9 lore raw

PATCH 3/16 spapr: Explain purpose of ->fwnmi_migration_blocker more clearly

In reply to Markus Armbruster

spapr_mce_req_event() makes an effort to prevent migration from degrading the reporting of FWNMIs. It adds a migration blocker when it receives one, and deletes it when it's done handling it. This is a best effort.

Commit 2500fb423a "migration: Include migration support for machine check handling" tried to explain this in a comment. Rewrite the comment for clarity, and reposition it to make it clear it applies to all failure modes, not just "migration already in progress".

Cc David Gibson <[email protected]>
Cc Aravinda Prasad <[email protected]>
Cc Ganesh Goudar <[email protected]>
Cc Dr. David Alan Gilbert <[email protected]>
---
 hw/ppc/spapr_events.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)
hw/ppc/spapr_events.c +9 -8
index a8f2cc6bdc..7d6876f12d 100644
@@ -911,16 +911,17 @@ void spapr_mce_req_event(PowerPCCPU *cpu, bool recovered)
         }
     }
 
+    /*
+     * Try to block migration while FWNMI is being handled, so the
+     * machine check handler runs where the information passed to it
+     * actually makes sense.  This shouldn't actually block migration,
+     * only delay it slightly, assuming migration is retried.  If the
+     * attempt to block fails, carry on.  Unfortunately, it always
+     * fails when running with -only-migrate.  A proper interface to
+     * delay migration completion for a bit could avoid that.
+     */
     ret = migrate_add_blocker(spapr->fwnmi_migration_blocker, NULL);
     if (ret == -EBUSY) {
-        /*
-         * We don't want to abort so we let the migration to continue.
-         * In a rare case, the machine check handler will run on the target.
-         * Though this is not preferable, it is better than aborting
-         * the migration or killing the VM. It is okay to call
-         * migrate_del_blocker on a blocker that was not added (which the
-         * nmi-interlock handler would do when it's called after this).
-         */
         warn_report("Received a fwnmi while migration was in progress");
     }
 
Signature · 1 line
2.31.1
Acked-by on v1 3/16
#10 lore raw

Re: [PATCH 03/16] spapr: Explain purpose of ->fwnmi_migration_blocker more clearly

Quoted 10 lines · Markus Armbruster

spapr_mce_req_event() makes an effort to prevent migration from degrading the reporting of FWNMIs. It adds a migration blocker when it receives one, and deletes it when it's done handling it. This is a best effort.

Commit 2500fb423a "migration: Include migration support for machine check handling" tried to explain this in a comment. Rewrite the comment for clarity, and reposition it to make it clear it applies to all failure modes, not just "migration already in progress".

Quoted 5 lines
Cc David Gibson <[email protected]>
Cc Aravinda Prasad <[email protected]>
Cc Ganesh Goudar <[email protected]>
Cc Dr. David Alan Gilbert <[email protected]>
Quoted 34 lines
---
 hw/ppc/spapr_events.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)
hw/ppc/spapr_events.c +9 -8
index a8f2cc6bdc..7d6876f12d 100644
@@ -911,16 +911,17 @@ void spapr_mce_req_event(PowerPCCPU *cpu, bool recovered)
         }
     }
 
+    /*
+     * Try to block migration while FWNMI is being handled, so the
+     * machine check handler runs where the information passed to it
+     * actually makes sense.  This shouldn't actually block migration,
+     * only delay it slightly, assuming migration is retried.  If the
+     * attempt to block fails, carry on.  Unfortunately, it always
+     * fails when running with -only-migrate.  A proper interface to
+     * delay migration completion for a bit could avoid that.
+     */
     ret = migrate_add_blocker(spapr->fwnmi_migration_blocker, NULL);
     if (ret == -EBUSY) {
-        /*
-         * We don't want to abort so we let the migration to continue.
-         * In a rare case, the machine check handler will run on the target.
-         * Though this is not preferable, it is better than aborting
-         * the migration or killing the VM. It is okay to call
-         * migrate_del_blocker on a blocker that was not added (which the
-         * nmi-interlock handler would do when it's called after this).
-         */
         warn_report("Received a fwnmi while migration was in progress");
     }
 
Signature · 4 lines
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson
#11 lore raw

PATCH 4/16 multi-process: Fix pci_proxy_dev_realize() error handling

In reply to Markus Armbruster

The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call.

pci_proxy_dev_realize() is wrong that way: it passes @errp to qio_channel_new_fd() without checking for failure. If it runs into another failure, it trips error_setv()'s assertion.

Fix it to check for failure properly.

Fixes 9f8112073aad8e485ac012ee18809457ab7f23a6
Cc Elena Ufimtseva <[email protected]>
Cc Jagannathan Raman <[email protected]>
Cc John G Johnson <[email protected]>
Cc Stefan Hajnoczi <[email protected]>
---
 hw/remote/proxy.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
hw/remote/proxy.c +9 -1
index 6dda705fc2..499f540c94 100644
@@ -102,10 +102,18 @@ static void pci_proxy_dev_realize(PCIDevice *device, Error **errp)
     }
 
     dev->ioc = qio_channel_new_fd(fd, errp);
+    if (!dev->ioc) {
+        close(fd);
+        return;
+    }
 
     error_setg(&dev->migration_blocker, "%s does not support migration",
                TYPE_PCI_PROXY_DEV);
-    migrate_add_blocker(dev->migration_blocker, errp);
+    if (migrate_add_blocker(dev->migration_blocker, errp) < 0) {
+        error_free(dev->migration_blocker);
+        object_unref(dev->ioc);
+        return;
+    }
 
     qemu_mutex_init(&dev->io_mutex);
     qio_channel_set_blocking(dev->ioc, true, NULL);
Signature · 1 line
2.31.1
Reviewed-by on v1 4/16
#12 lore raw

Re: [PATCH 04/16] multi-process: Fix pci_proxy_dev_realize() error handling

Quoted 18 lines · Markus Armbruster

The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call.

pci_proxy_dev_realize() is wrong that way: it passes @errp to qio_channel_new_fd() without checking for failure. If it runs into another failure, it trips error_setv()'s assertion.

Fix it to check for failure properly.

Fixes 9f8112073aad8e485ac012ee18809457ab7f23a6
Cc Elena Ufimtseva <[email protected]>
Cc Jagannathan Raman <[email protected]>
Cc John G Johnson <[email protected]>
Cc Stefan Hajnoczi <[email protected]>
Quoted 3 lines
---
 hw/remote/proxy.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
Acked-by on v1 4/16
#13 lore raw

Re: [PATCH 04/16] multi-process: Fix pci_proxy_dev_realize() error handling

In reply to Markus Armbruster
Quoted 22 lines · Markus Armbruster

The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call.

pci_proxy_dev_realize() is wrong that way: it passes @errp to qio_channel_new_fd() without checking for failure. If it runs into another failure, it trips error_setv()'s assertion.

Fix it to check for failure properly.

Fixes 9f8112073aad8e485ac012ee18809457ab7f23a6
Cc Elena Ufimtseva <[email protected]>
Cc Jagannathan Raman <[email protected]>
Cc John G Johnson <[email protected]>
Cc Stefan Hajnoczi <[email protected]>
Quoted 3 lines

---
hw/remote/proxy.c | 10 +++++++++-

1 file changed, 9 insertions(+), 1 deletion(-)
#14 lore raw

PATCH 5/16 vhost-scsi: Plug memory leak on migrate_add_blocker() failure

In reply to Markus Armbruster
Cc Michael S. Tsirkin <[email protected]>
---
 hw/scsi/vhost-scsi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
hw/scsi/vhost-scsi.c +2 -2
index 8c611bfd2d..039caf2614 100644
@@ -208,7 +208,6 @@ static void vhost_scsi_realize(DeviceState *dev, Error **errp)
                 "target SCSI device state or use shared storage over network), "
                 "set 'migratable' property to true to enable migration.");
         if (migrate_add_blocker(vsc->migration_blocker, errp) < 0) {
-            error_free(vsc->migration_blocker);
             goto free_virtio;
         }
     }
@@ -233,11 +232,12 @@ static void vhost_scsi_realize(DeviceState *dev, Error **errp)
     return;
 
  free_vqs:
+    g_free(vsc->dev.vqs);
     if (!vsc->migratable) {
         migrate_del_blocker(vsc->migration_blocker);
     }
-    g_free(vsc->dev.vqs);
  free_virtio:
+    error_free(vsc->migration_blocker);
     virtio_scsi_common_unrealize(dev);
  close_fd:
     close(vhostfd);
Signature · 1 line
2.31.1
#15 lore raw

PATCH 6/16 i386: Never free migration blocker objects instead of sometimes

In reply to Markus Armbruster

invtsc_mig_blocker has static storage duration. When a CPU with certain features is initialized, and invtsc_mig_blocker is still null, we add a migration blocker and store it in invtsc_mig_blocker.

The object is freed when migrate_add_blocker() fails, leaving invtsc_mig_blocker dangling. It is not freed on later failures.

Same for hv_passthrough_mig_blocker and hv_no_nonarch_cs_mig_blocker.

All failures are actually fatal, so whether we free or not doesn't really matter, except as bad examples to be copied / imitated.

Clean this up in a minimal way: never free these blocker objects.

Cc Paolo Bonzini <[email protected]>
Cc Marcelo Tosatti <[email protected]>
Cc Eduardo Habkost <[email protected]>
---
 target/i386/kvm/kvm.c | 3 ---
 1 file changed, 3 deletions(-)
target/i386/kvm/kvm.c +0 -3
index 59ed8327ac..8e1bb905ca 100644
@@ -1423,7 +1423,6 @@ static int hyperv_init_vcpu(X86CPU *cpu)
         ret = migrate_add_blocker(hv_passthrough_mig_blocker, &local_err);
         if (local_err) {
             error_report_err(local_err);
-            error_free(hv_passthrough_mig_blocker);
             return ret;
         }
     }
@@ -1438,7 +1437,6 @@ static int hyperv_init_vcpu(X86CPU *cpu)
         ret = migrate_add_blocker(hv_no_nonarch_cs_mig_blocker, &local_err);
         if (local_err) {
             error_report_err(local_err);
-            error_free(hv_no_nonarch_cs_mig_blocker);
             return ret;
         }
     }
@@ -1878,7 +1876,6 @@ int kvm_arch_init_vcpu(CPUState *cs)
             r = migrate_add_blocker(invtsc_mig_blocker, &local_err);
             if (local_err) {
                 error_report_err(local_err);
-                error_free(invtsc_mig_blocker);
                 return r;
             }
         }
Signature · 1 line
2.31.1
#16 lore raw

PATCH 7/16 vfio: Avoid error_propagate() after migrate_add_blocker()

In reply to Markus Armbruster

When migrate_add_blocker(blocker, &errp) is followed by error_propagate(errp, err), we can often just as well do migrate_add_blocker(..., errp). This is the case in vfio_migration_probe().

Prior art: commit 386f6c07d2 "error: Avoid error_propagate() after migrate_add_blocker()".

Cc Kirti Wankhede <[email protected]>
Cc Alex Williamson <[email protected]>
---
 hw/vfio/migration.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
hw/vfio/migration.c +2 -4
index 82f654afb6..ff6b45de6b 100644
@@ -858,7 +858,6 @@ int vfio_migration_probe(VFIODevice *vbasedev, Error **errp)
 {
     VFIOContainer *container = vbasedev->group->container;
     struct vfio_region_info *info = NULL;
-    Error *local_err = NULL;
     int ret = -ENOTSUP;
 
     if (!vbasedev->enable_migration || !container->dirty_pages_supported) {
@@ -885,9 +884,8 @@ add_blocker:
                "VFIO device doesn't support migration");
     g_free(info);
 
-    ret = migrate_add_blocker(vbasedev->migration_blocker, &local_err);
-    if (local_err) {
-        error_propagate(errp, local_err);
+    ret = migrate_add_blocker(vbasedev->migration_blocker, errp);
+    if (ret < 0) {
         error_free(vbasedev->migration_blocker);
         vbasedev->migration_blocker = NULL;
     }
Signature · 1 line
2.31.1
Reviewed-by on v1 7/16
#17 lore raw

Re: [PATCH 07/16] vfio: Avoid error_propagate() after migrate_add_blocker()

Quoted 8 lines · Markus Armbruster

When migrate_add_blocker(blocker, &errp) is followed by error_propagate(errp, err), we can often just as well do migrate_add_blocker(..., errp). This is the case in vfio_migration_probe().

Prior art: commit 386f6c07d2 "error: Avoid error_propagate() after migrate_add_blocker()".

Quoted 6 lines
Cc Kirti Wankhede <[email protected]>
Cc Alex Williamson <[email protected]>
---
 hw/vfio/migration.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
#18 lore raw

Re: [PATCH 07/16] vfio: Avoid error_propagate() after migrate_add_blocker()

In reply to Markus Armbruster
Quoted 30 lines · Markus Armbruster

When migrate_add_blocker(blocker, &errp) is followed by error_propagate(errp, err), we can often just as well do migrate_add_blocker(..., errp). This is the case in vfio_migration_probe().

Prior art: commit 386f6c07d2 "error: Avoid error_propagate() after migrate_add_blocker()".

Cc Kirti Wankhede <[email protected]>
Cc Alex Williamson <[email protected]>
---
  hw/vfio/migration.c | 6 ++----
  1 file changed, 2 insertions(+), 4 deletions(-)
hw/vfio/migration.c +0 -1
index 82f654afb6..ff6b45de6b 100644
@@ -858,7 +858,6 @@ int vfio_migration_probe(VFIODevice *vbasedev, Error **errp)
  {
      VFIOContainer *container = vbasedev->group->container;
      struct vfio_region_info *info = NULL;
-    Error *local_err = NULL;
      int ret = -ENOTSUP;
 
      if (!vbasedev->enable_migration || !container->dirty_pages_supported) {
@@ -885,9 +884,8 @@ add_blocker:
                 "VFIO device doesn't support migration");

hw/vfio/migration.c add_blocker: · line 891

Quoted 10 lines
hw/vfio/migration.c +2 -3
      g_free(info);
 
-    ret = migrate_add_blocker(vbasedev->migration_blocker, &local_err);
-    if (local_err) {
-        error_propagate(errp, local_err);
+    ret = migrate_add_blocker(vbasedev->migration_blocker, errp);
+    if (ret < 0) {
          error_free(vbasedev->migration_blocker);
          vbasedev->migration_blocker = NULL;
      }

Reviewed by: Kirti Wankhede <[email protected]>

#19 lore raw

Re: [PATCH 07/16] vfio: Avoid error_propagate() after migrate_add_blocker()

In reply to Markus Armbruster
Quoted 1 line · Markus Armbruster

When migrate_add_blocker(blocker, &errp) is followed by

Just a nit, &err.

Paolo

Quoted 3 lines

error_propagate(errp, err), we can often just as well do migrate_add_blocker(..., errp). This is the case in vfio_migration_probe().

#20 lore raw

Re: [PATCH 07/16] vfio: Avoid error_propagate() after migrate_add_blocker()

Quoted 4 lines · Paolo Bonzini
Quoted 1 line · Markus Armbruster

When migrate_add_blocker(blocker, &errp) is followed by

Just a nit, &err.

Wll fix, thanks!

Quoted 5 lines

Paolo

Quoted 3 lines

error_propagate(errp, err), we can often just as well do migrate_add_blocker(..., errp). This is the case in vfio_migration_probe().

#21 lore raw

PATCH 8/16 whpx nvmm: Drop useless migrate_del_blocker()

In reply to Markus Armbruster

There is nothing to delete after migrate_add_blocker() failed. Trying anyway is safe, but useless. Don't.

Cc Sunil Muthuswamy <[email protected]>
Cc Kamil Rytarowski <[email protected]>
Cc Reinoud Zandijk <[email protected]>
---
 target/i386/nvmm/nvmm-all.c | 1 -
 target/i386/whpx/whpx-all.c | 1 -
 2 files changed, 2 deletions(-)
target/i386/nvmm/nvmm-all.c +0 -1
index dfa690d65d..7bb0d9e30e 100644
@@ -929,7 +929,6 @@ nvmm_init_vcpu(CPUState *cpu)
         (void)migrate_add_blocker(nvmm_migration_blocker, &local_error);
         if (local_error) {
             error_report_err(local_error);
-            migrate_del_blocker(nvmm_migration_blocker);
             error_free(nvmm_migration_blocker);
             return -EINVAL;
         }
target/i386/whpx/whpx-all.c +0 -1
index f832f286ac..cc8c0b984b 100644
@@ -1349,7 +1349,6 @@ int whpx_init_vcpu(CPUState *cpu)
         (void)migrate_add_blocker(whpx_migration_blocker, &local_error);
         if (local_error) {
             error_report_err(local_error);
-            migrate_del_blocker(whpx_migration_blocker);
             error_free(whpx_migration_blocker);
             ret = -EINVAL;
             goto error;
Signature · 1 line
2.31.1
Reviewed-by on v1 8/16
#22 lore raw

Re: [PATCH 08/16] whpx nvmm: Drop useless migrate_del_blocker()

Quoted 17 lines · Markus Armbruster

There is nothing to delete after migrate_add_blocker() failed. Trying anyway is safe, but useless. Don't.

Cc Sunil Muthuswamy <[email protected]>
Cc Kamil Rytarowski <[email protected]>
Cc Reinoud Zandijk <[email protected]>
---
 target/i386/nvmm/nvmm-all.c | 1 -
 target/i386/whpx/whpx-all.c | 1 -
 2 files changed, 2 deletions(-)
target/i386/nvmm/nvmm-all.c +0 -0
index dfa690d65d..7bb0d9e30e 100644

target/i386/nvmm/nvmm-all.c nvmm_init_vcpu(CPUState *cpu) · line 934

Quoted 7 lines
target/i386/nvmm/nvmm-all.c +0 -1
@@ -929,7 +929,6 @@ nvmm_init_vcpu(CPUState *cpu)
         (void)migrate_add_blocker(nvmm_migration_blocker, &local_error);
         if (local_error) {
             error_report_err(local_error);
-            migrate_del_blocker(nvmm_migration_blocker);
             error_free(nvmm_migration_blocker);
             return -EINVAL;
         }

No problem with it

#23 lore raw

PATCH 9/16 migration: Unify failure check for migrate_add_blocker()

In reply to Markus Armbruster

Most callers check the return value. Some check whether it set an error. Functionally equivalent, but the former tends to be easier on the eyes, so do that everywhere.

Prior art: commit c6ecec43b2 "qemu-option: Check return value instead of @err where convenient".

---
 backends/tpm/tpm_emulator.c | 3 +--
 hw/display/qxl.c            | 8 ++++----
 hw/virtio/vhost.c           | 2 +-
 target/i386/kvm/kvm.c       | 6 +++---
 target/i386/nvmm/nvmm-all.c | 3 +--
 target/i386/whpx/whpx-all.c | 3 +--
 6 files changed, 11 insertions(+), 14 deletions(-)
backends/tpm/tpm_emulator.c +1 -2
index e5f1063ab6..f8095d23d5 100644
@@ -492,8 +492,7 @@ static int tpm_emulator_block_migration(TPMEmulator *tpm_emu)
         error_setg(&tpm_emu->migration_blocker,
                    "Migration disabled: TPM emulator does not support "
                    "migration");
-        migrate_add_blocker(tpm_emu->migration_blocker, &err);
-        if (err) {
+        if (migrate_add_blocker(tpm_emu->migration_blocker, &err) < 0) {
             error_report_err(err);
             error_free(tpm_emu->migration_blocker);
             tpm_emu->migration_blocker = NULL;
hw/display/qxl.c +4 -4
index 84f99088e0..436399db76 100644
@@ -680,12 +680,12 @@ static int interface_get_command(QXLInstance *sin, struct QXLCommandExt *ext)
                     msg < (void *)qxl->vga.vram_ptr ||
                     msg > ((void *)qxl->vga.vram_ptr + qxl->vga.vram_size))) {
                 if (!qxl->migration_blocker) {
-                    Error *local_err = NULL;
+                    Error *err = NULL;
+
                     error_setg(&qxl->migration_blocker,
                                "qxl: guest bug: command not in ram bar");
-                    migrate_add_blocker(qxl->migration_blocker, &local_err);
-                    if (local_err) {
-                        error_report_err(local_err);
+                    if (migrate_add_blocker(qxl->migration_blocker, &err) < 0) {
+                        error_report_err(err);
                     }
                 }
             }
hw/virtio/vhost.c +1 -1
index e8f85a5d2d..dbbc6b6915 100644
@@ -1372,7 +1372,7 @@ int vhost_dev_init(struct vhost_dev *hdev, void *opaque,
 
     if (hdev->migration_blocker != NULL) {
         r = migrate_add_blocker(hdev->migration_blocker, errp);
-        if (*errp) {
+        if (r < 0) {
             error_free(hdev->migration_blocker);
             goto fail_busyloop;
         }
target/i386/kvm/kvm.c +3 -3
index 8e1bb905ca..bb72c233cc 100644
@@ -1421,7 +1421,7 @@ static int hyperv_init_vcpu(X86CPU *cpu)
                    "'hv-passthrough' CPU flag prevents migration, use explicit"
                    " set of hv-* flags instead");
         ret = migrate_add_blocker(hv_passthrough_mig_blocker, &local_err);
-        if (local_err) {
+        if (ret < 0) {
             error_report_err(local_err);
             return ret;
         }
@@ -1435,7 +1435,7 @@ static int hyperv_init_vcpu(X86CPU *cpu)
                    " make sure SMT is disabled and/or that vCPUs are properly"
                    " pinned)");
         ret = migrate_add_blocker(hv_no_nonarch_cs_mig_blocker, &local_err);
-        if (local_err) {
+        if (ret < 0) {
             error_report_err(local_err);
             return ret;
         }
@@ -1874,7 +1874,7 @@ int kvm_arch_init_vcpu(CPUState *cs)
                        "State blocked by non-migratable CPU device"
                        " (invtsc flag)");
             r = migrate_add_blocker(invtsc_mig_blocker, &local_err);
-            if (local_err) {
+            if (r < 0) {
                 error_report_err(local_err);
                 return r;
             }
target/i386/nvmm/nvmm-all.c +1 -2
index 7bb0d9e30e..28dee4c5ee 100644
@@ -926,8 +926,7 @@ nvmm_init_vcpu(CPUState *cpu)
         error_setg(&nvmm_migration_blocker,
             "NVMM: Migration not supported");
 
-        (void)migrate_add_blocker(nvmm_migration_blocker, &local_error);
-        if (local_error) {
+        if (migrate_add_blocker(nvmm_migration_blocker, &local_error) < 0) {
             error_report_err(local_error);
             error_free(nvmm_migration_blocker);
             return -EINVAL;
target/i386/whpx/whpx-all.c +1 -2
index cc8c0b984b..3e925b9da7 100644
@@ -1346,8 +1346,7 @@ int whpx_init_vcpu(CPUState *cpu)
                "State blocked due to non-migratable CPUID feature support,"
                "dirty memory tracking support, and XSAVE/XRSTOR support");
 
-        (void)migrate_add_blocker(whpx_migration_blocker, &local_error);
-        if (local_error) {
+        if (migrate_add_blocker(whpx_migration_blocker, &local_error) < 0) {
             error_report_err(local_error);
             error_free(whpx_migration_blocker);
             ret = -EINVAL;
Signature · 1 line
2.31.1
Reviewed-by on v1 9/16
#24 lore raw

Re: [PATCH 09/16] migration: Unify failure check for migrate_add_blocker()

Quoted 8 lines · Markus Armbruster

Most callers check the return value. Some check whether it set an error. Functionally equivalent, but the former tends to be easier on the eyes, so do that everywhere.

Prior art: commit c6ecec43b2 "qemu-option: Check return value instead of @err where convenient".

Quoted 8 lines
---
 backends/tpm/tpm_emulator.c | 3 +--
 hw/display/qxl.c            | 8 ++++----
 hw/virtio/vhost.c           | 2 +-
 target/i386/kvm/kvm.c       | 6 +++---
 target/i386/nvmm/nvmm-all.c | 3 +--
 target/i386/whpx/whpx-all.c | 3 +--
 6 files changed, 11 insertions(+), 14 deletions(-)
#25 lore raw

PATCH 10/16 migration: Handle migration_incoming_setup() errors consistently

In reply to Markus Armbruster

Commit b673eab4e2 "multifd: Make multifd_load_setup() get an Error parameter" changed migration_incoming_setup() to take an Error ** argument, and adjusted the callers accordingly. It neglected to change adjust multifd_load_setup(): it still exit()s on error. Clean that up.

The error now gets propagated up two call chains: via migration_fd_process_incoming() to rdma_accept_incoming_migration(), and via migration_ioc_process_incoming() to migration_channel_process_incoming(). Both chain ends report the error with error_report_err(), but otherwise ignore it. Behavioral
change: we no longer exit() on this error.

This is consistent with how we handle other errors here, e.g. from multifd_recv_new_channel() via migration_ioc_process_incoming() to migration_channel_process_incoming(). Wether it's consistently right or consistently wrong I can't tell.

Also clean up the return value from the unusual 0 on success, 1 on error to the more common true on success, false on error.

Cc Juan Quintela <[email protected]>
Cc Dr. David Alan Gilbert <[email protected]>
---
 migration/migration.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)
migration/migration.c +9 -18
index 231dc24414..c1c0a48647 100644
@@ -609,30 +609,25 @@ fail:
 }
 
 /**
- * @migration_incoming_setup: Setup incoming migration
- *
- * Returns 0 for no error or 1 for error
- *
+ * migration_incoming_setup: Setup incoming migration
  * @f: file for main migration channel
  * @errp: where to put errors
+ *
+ * Returns: %true on success, %false on error.
  */
-static int migration_incoming_setup(QEMUFile *f, Error **errp)
+static bool migration_incoming_setup(QEMUFile *f, Error **errp)
 {
     MigrationIncomingState *mis = migration_incoming_get_current();
-    Error *local_err = NULL;
 
-    if (multifd_load_setup(&local_err) != 0) {
-        /* We haven't been able to create multifd threads
-           nothing better to do */
-        error_report_err(local_err);
-        exit(EXIT_FAILURE);
+    if (multifd_load_setup(errp) != 0) {
+        return false;
     }
 
     if (!mis->from_src_file) {
         mis->from_src_file = f;
     }
     qemu_file_set_blocking(f, false);
-    return 0;
+    return true;
 }
 
 void migration_incoming_process(void)
@@ -675,14 +670,11 @@ static bool postcopy_try_recover(QEMUFile *f)
 
 void migration_fd_process_incoming(QEMUFile *f, Error **errp)
 {
-    Error *local_err = NULL;
-
     if (postcopy_try_recover(f)) {
         return;
     }
 
-    if (migration_incoming_setup(f, &local_err)) {
-        error_propagate(errp, local_err);
+    if (!migration_incoming_setup(f, errp)) {
         return;
     }
     migration_incoming_process();
@@ -703,8 +695,7 @@ void migration_ioc_process_incoming(QIOChannel *ioc, Error **errp)
             return;
         }
 
-        if (migration_incoming_setup(f, &local_err)) {
-            error_propagate(errp, local_err);
+        if (!migration_incoming_setup(f, errp)) {
             return;
         }
 
Signature · 1 line
2.31.1
Reviewed-by on v1 10/16
#26 lore raw

Re: [PATCH 10/16] migration: Handle migration_incoming_setup() errors consistently

Quoted 13 lines · Markus Armbruster

Commit b673eab4e2 "multifd: Make multifd_load_setup() get an Error parameter" changed migration_incoming_setup() to take an Error ** argument, and adjusted the callers accordingly. It neglected to change adjust multifd_load_setup(): it still exit()s on error. Clean that up.

The error now gets propagated up two call chains: via migration_fd_process_incoming() to rdma_accept_incoming_migration(), and via migration_ioc_process_incoming() to migration_channel_process_incoming(). Both chain ends report the error with error_report_err(), but otherwise ignore it. Behavioral
change: we no longer exit() on this error.

Quoted 3 lines

This is consistent with how we handle other errors here, e.g. from multifd_recv_new_channel() via migration_ioc_process_incoming() to migration_channel_process_incoming(). Wether it's consistently right

Whether

Quoted 5 lines

or consistently wrong I can't tell.

Also clean up the return value from the unusual 0 on success, 1 on error to the more common true on success, false on error.

Quoted 7 lines
Cc Juan Quintela <[email protected]>
Cc Dr. David Alan Gilbert <[email protected]>
---
 migration/migration.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)
Signature · 3 lines
Eric Blake, Principal Software Engineer
Red Hat, Inc.           +1-919-301-3266
Virtualization:  qemu.org | libvirt.org
#27 lore raw

Re: [PATCH 10/16] migration: Handle migration_incoming_setup() errors consistently

Quoted 14 lines · Eric Blake
Quoted 13 lines · Markus Armbruster

Commit b673eab4e2 "multifd: Make multifd_load_setup() get an Error parameter" changed migration_incoming_setup() to take an Error ** argument, and adjusted the callers accordingly. It neglected to change adjust multifd_load_setup(): it still exit()s on error. Clean that up.

The error now gets propagated up two call chains: via migration_fd_process_incoming() to rdma_accept_incoming_migration(), and via migration_ioc_process_incoming() to migration_channel_process_incoming(). Both chain ends report the error with error_report_err(), but otherwise ignore it. Behavioral
change: we no longer exit() on this error.

Quoted 5 lines
Quoted 3 lines

This is consistent with how we handle other errors here, e.g. from multifd_recv_new_channel() via migration_ioc_process_incoming() to migration_channel_process_incoming(). Wether it's consistently right

Whether

ACK

Quoted 13 lines
Quoted 5 lines

or consistently wrong I can't tell.

Also clean up the return value from the unusual 0 on success, 1 on error to the more common true on success, false on error.

Quoted 7 lines
Cc Juan Quintela <[email protected]>
Cc Dr. David Alan Gilbert <[email protected]>
---
 migration/migration.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)
Quoted 1 line

Thanks!

Reviewed-by on v1 10/16
#28 lore raw

Re: [PATCH 10/16] migration: Handle migration_incoming_setup() errors consistently

In reply to Markus Armbruster
Quoted 87 lines

Commit b673eab4e2 "multifd: Make multifd_load_setup() get an Error parameter" changed migration_incoming_setup() to take an Error ** argument, and adjusted the callers accordingly. It neglected to change adjust multifd_load_setup(): it still exit()s on error. Clean that up.

The error now gets propagated up two call chains: via migration_fd_process_incoming() to rdma_accept_incoming_migration(), and via migration_ioc_process_incoming() to migration_channel_process_incoming(). Both chain ends report the error with error_report_err(), but otherwise ignore it. Behavioral
change: we no longer exit() on this error.

This is consistent with how we handle other errors here, e.g. from multifd_recv_new_channel() via migration_ioc_process_incoming() to migration_channel_process_incoming(). Wether it's consistently right or consistently wrong I can't tell.

Also clean up the return value from the unusual 0 on success, 1 on error to the more common true on success, false on error.

Cc Juan Quintela <[email protected]>
Cc Dr. David Alan Gilbert <[email protected]>
---
 migration/migration.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)
migration/migration.c +8 -16
index 231dc24414..c1c0a48647 100644
@@ -609,30 +609,25 @@ fail:
 }
 
 /**
- * @migration_incoming_setup: Setup incoming migration
- *
- * Returns 0 for no error or 1 for error
- *
+ * migration_incoming_setup: Setup incoming migration
  * @f: file for main migration channel
  * @errp: where to put errors
+ *
+ * Returns: %true on success, %false on error.
  */
-static int migration_incoming_setup(QEMUFile *f, Error **errp)
+static bool migration_incoming_setup(QEMUFile *f, Error **errp)
 {
     MigrationIncomingState *mis = migration_incoming_get_current();
-    Error *local_err = NULL;
 
-    if (multifd_load_setup(&local_err) != 0) {
-        /* We haven't been able to create multifd threads
-           nothing better to do */
-        error_report_err(local_err);
-        exit(EXIT_FAILURE);
+    if (multifd_load_setup(errp) != 0) {
+        return false;
     }
 
     if (!mis->from_src_file) {
         mis->from_src_file = f;
     }
     qemu_file_set_blocking(f, false);
-    return 0;
+    return true;
 }
 
 void migration_incoming_process(void)
@@ -675,14 +670,11 @@ static bool postcopy_try_recover(QEMUFile *f)
 
 void migration_fd_process_incoming(QEMUFile *f, Error **errp)
 {
-    Error *local_err = NULL;
-
     if (postcopy_try_recover(f)) {
         return;
     }
 
-    if (migration_incoming_setup(f, &local_err)) {
-        error_propagate(errp, local_err);
+    if (!migration_incoming_setup(f, errp)) {
         return;
     }
     migration_incoming_process();

migration/migration.c void migration_ioc_process_incoming(QIOChannel *ioc, Error **errp) · line 701

Quoted 9 lines
migration/migration.c +1 -2
@@ -703,8 +695,7 @@ void migration_ioc_process_incoming(QIOChannel *ioc, Error **errp)
             return;
         }
 
-        if (migration_incoming_setup(f, &local_err)) {
-            error_propagate(errp, local_err);
+        if (!migration_incoming_setup(f, errp)) {
             return;
         }
 
#29 lore raw

Re: [PATCH 10/16] migration: Handle migration_incoming_setup() errors consistently

In reply to Markus Armbruster
Quoted 50 lines · * Markus Armbruster ([email protected]) wrote:

Commit b673eab4e2 "multifd: Make multifd_load_setup() get an Error parameter" changed migration_incoming_setup() to take an Error ** argument, and adjusted the callers accordingly. It neglected to change adjust multifd_load_setup(): it still exit()s on error. Clean that up.

The error now gets propagated up two call chains: via migration_fd_process_incoming() to rdma_accept_incoming_migration(), and via migration_ioc_process_incoming() to migration_channel_process_incoming(). Both chain ends report the error with error_report_err(), but otherwise ignore it. Behavioral
change: we no longer exit() on this error.

This is consistent with how we handle other errors here, e.g. from multifd_recv_new_channel() via migration_ioc_process_incoming() to migration_channel_process_incoming(). Wether it's consistently right or consistently wrong I can't tell.

Also clean up the return value from the unusual 0 on success, 1 on error to the more common true on success, false on error.

Cc Juan Quintela <[email protected]>
Cc Dr. David Alan Gilbert <[email protected]>
---
 migration/migration.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)
migration/migration.c +4 -5
index 231dc24414..c1c0a48647 100644
@@ -609,30 +609,25 @@ fail:
 }
 
 /**
- * @migration_incoming_setup: Setup incoming migration
- *
- * Returns 0 for no error or 1 for error
- *
+ * migration_incoming_setup: Setup incoming migration
  * @f: file for main migration channel
  * @errp: where to put errors
+ *
+ * Returns: %true on success, %false on error.
  */
-static int migration_incoming_setup(QEMUFile *f, Error **errp)
+static bool migration_incoming_setup(QEMUFile *f, Error **errp)
 {
     MigrationIncomingState *mis = migration_incoming_get_current();

migration/migration.c fail: · line 624

Quoted 10 lines
migration/migration.c +2 -6
-    Error *local_err = NULL;
 
-    if (multifd_load_setup(&local_err) != 0) {
-        /* We haven't been able to create multifd threads
-           nothing better to do */
-        error_report_err(local_err);
-        exit(EXIT_FAILURE);
+    if (multifd_load_setup(errp) != 0) {
+        return false;
     }

What I don't know is how well that will survive; for example in multifd_load_setup it creates multiple threads and calls the recv_setup member on each thread; now if one of those fails what happens - if we don't exit, is it cleaned up enough so you can try another migrate_incoming or is it just going to fall over?

Dave

Quoted 39 lines
migration/migration.c +3 -7
     if (!mis->from_src_file) {
         mis->from_src_file = f;
     }
     qemu_file_set_blocking(f, false);
-    return 0;
+    return true;
 }
 
 void migration_incoming_process(void)
@@ -675,14 +670,11 @@ static bool postcopy_try_recover(QEMUFile *f)
 
 void migration_fd_process_incoming(QEMUFile *f, Error **errp)
 {
-    Error *local_err = NULL;
-
     if (postcopy_try_recover(f)) {
         return;
     }
 
-    if (migration_incoming_setup(f, &local_err)) {
-        error_propagate(errp, local_err);
+    if (!migration_incoming_setup(f, errp)) {
         return;
     }
     migration_incoming_process();
@@ -703,8 +695,7 @@ void migration_ioc_process_incoming(QIOChannel *ioc, Error **errp)
             return;
         }
 
-        if (migration_incoming_setup(f, &local_err)) {
-            error_propagate(errp, local_err);
+        if (!migration_incoming_setup(f, errp)) {
             return;
         }
 
Signature · 1 line
2.31.1
Signature · 1 line
Dr. David Alan Gilbert / [email protected] / Manchester, UK
#30 lore raw

Re: [PATCH 10/16] migration: Handle migration_incoming_setup() errors consistently

Quoted 53 lines · Dr. David Alan Gilbert
Quoted 52 lines · * Markus Armbruster ([email protected]) wrote:

Commit b673eab4e2 "multifd: Make multifd_load_setup() get an Error parameter" changed migration_incoming_setup() to take an Error ** argument, and adjusted the callers accordingly. It neglected to change adjust multifd_load_setup(): it still exit()s on error. Clean that up.

The error now gets propagated up two call chains: via migration_fd_process_incoming() to rdma_accept_incoming_migration(), and via migration_ioc_process_incoming() to migration_channel_process_incoming(). Both chain ends report the error with error_report_err(), but otherwise ignore it. Behavioral
change: we no longer exit() on this error.

This is consistent with how we handle other errors here, e.g. from multifd_recv_new_channel() via migration_ioc_process_incoming() to migration_channel_process_incoming(). Wether it's consistently right or consistently wrong I can't tell.

Also clean up the return value from the unusual 0 on success, 1 on error to the more common true on success, false on error.

Cc Juan Quintela <[email protected]>
Cc Dr. David Alan Gilbert <[email protected]>
---
 migration/migration.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)
migration/migration.c +4 -6
index 231dc24414..c1c0a48647 100644
@@ -609,30 +609,25 @@ fail:
 }
 
 /**
- * @migration_incoming_setup: Setup incoming migration
- *
- * Returns 0 for no error or 1 for error
- *
+ * migration_incoming_setup: Setup incoming migration
  * @f: file for main migration channel
  * @errp: where to put errors
+ *
+ * Returns: %true on success, %false on error.
  */
-static int migration_incoming_setup(QEMUFile *f, Error **errp)
+static bool migration_incoming_setup(QEMUFile *f, Error **errp)
 {
     MigrationIncomingState *mis = migration_incoming_get_current();
-    Error *local_err = NULL;
 
Quoted 14 lines

migration/migration.c fail: · line 624

Quoted 8 lines
migration/migration.c +2 -5
-    if (multifd_load_setup(&local_err) != 0) {
-        /* We haven't been able to create multifd threads
-           nothing better to do */
-        error_report_err(local_err);
-        exit(EXIT_FAILURE);
+    if (multifd_load_setup(errp) != 0) {
+        return false;
     }

What I don't know is how well that will survive; for example in multifd_load_setup it creates multiple threads and calls the recv_setup member on each thread; now if one of those fails what happens - if we don't exit, is it cleaned up enough so you can try another migrate_incoming or is it just going to fall over?

I don't know, either.

The inconsistent error handling we have is not good. More consistent error handling that unmasks bad error handling could be worse, unless we fix the unmasked badness.

How can we move forward with this patch?

One way *I* could move forward is to tack a FIXME comment to the problematic exit(1) instead of removing it.

[...]

#31 lore raw

Re: [PATCH 10/16] migration: Handle migration_incoming_setup() errors consistently

Quoted 76 lines · Markus Armbruster
Quoted 53 lines · Dr. David Alan Gilbert
Quoted 52 lines · * Markus Armbruster ([email protected]) wrote:

Commit b673eab4e2 "multifd: Make multifd_load_setup() get an Error parameter" changed migration_incoming_setup() to take an Error ** argument, and adjusted the callers accordingly. It neglected to change adjust multifd_load_setup(): it still exit()s on error. Clean that up.

The error now gets propagated up two call chains: via migration_fd_process_incoming() to rdma_accept_incoming_migration(), and via migration_ioc_process_incoming() to migration_channel_process_incoming(). Both chain ends report the error with error_report_err(), but otherwise ignore it. Behavioral
change: we no longer exit() on this error.

This is consistent with how we handle other errors here, e.g. from multifd_recv_new_channel() via migration_ioc_process_incoming() to migration_channel_process_incoming(). Wether it's consistently right or consistently wrong I can't tell.

Also clean up the return value from the unusual 0 on success, 1 on error to the more common true on success, false on error.

Cc Juan Quintela <[email protected]>
Cc Dr. David Alan Gilbert <[email protected]>
---
 migration/migration.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)
migration/migration.c +4 -6
index 231dc24414..c1c0a48647 100644
@@ -609,30 +609,25 @@ fail:
 }
 
 /**
- * @migration_incoming_setup: Setup incoming migration
- *
- * Returns 0 for no error or 1 for error
- *
+ * migration_incoming_setup: Setup incoming migration
  * @f: file for main migration channel
  * @errp: where to put errors
+ *
+ * Returns: %true on success, %false on error.
  */
-static int migration_incoming_setup(QEMUFile *f, Error **errp)
+static bool migration_incoming_setup(QEMUFile *f, Error **errp)
 {
     MigrationIncomingState *mis = migration_incoming_get_current();
-    Error *local_err = NULL;
 
Quoted 14 lines

migration/migration.c fail: · line 624

Quoted 8 lines
migration/migration.c +2 -5
-    if (multifd_load_setup(&local_err) != 0) {
-        /* We haven't been able to create multifd threads
-           nothing better to do */
-        error_report_err(local_err);
-        exit(EXIT_FAILURE);
+    if (multifd_load_setup(errp) != 0) {
+        return false;
     }

What I don't know is how well that will survive; for example in multifd_load_setup it creates multiple threads and calls the recv_setup member on each thread; now if one of those fails what happens - if we don't exit, is it cleaned up enough so you can try another migrate_incoming or is it just going to fall over?

I don't know, either.

The inconsistent error handling we have is not good. More consistent error handling that unmasks bad error handling could be worse, unless we fix the unmasked badness.

Quoted 6 lines

How can we move forward with this patch?

One way *I* could move forward is to tack a FIXME comment to the problematic exit(1) instead of removing it.

[...]

I forgot this was still undecided, and included the patch in my pull request. It has become commit 7d6f6933aa7. Feel free to revert it, or to ask me to restore the exit() on failure.

#32 lore raw

PATCH 11/16 microvm: Drop dead error handling in microvm_machine_state_init()

In reply to Markus Armbruster

Stillborn in commit 0ebf007dda "hw/i386: Introduce the microvm machine type".

---
 hw/i386/microvm.c | 5 -----
 1 file changed, 5 deletions(-)
hw/i386/microvm.c +0 -5
index aba0c83219..f257ec5a0b 100644
@@ -458,15 +458,10 @@ static void microvm_machine_state_init(MachineState *machine)
 {
     MicrovmMachineState *mms = MICROVM_MACHINE(machine);
     X86MachineState *x86ms = X86_MACHINE(machine);
-    Error *local_err = NULL;
 
     microvm_memory_init(mms);
 
     x86_cpus_init(x86ms, CPU_VERSION_LATEST);
-    if (local_err) {
-        error_report_err(local_err);
-        exit(1);
-    }
 
     microvm_devices_init(mms);
 }
Signature · 1 line
2.31.1
Reviewed-by on v1 11/16
#33 lore raw

Re: [PATCH 11/16] microvm: Drop dead error handling in microvm_machine_state_init()

Quoted 32 lines · Markus Armbruster

Stillborn in commit 0ebf007dda "hw/i386: Introduce the microvm machine type".

---
 hw/i386/microvm.c | 5 -----
 1 file changed, 5 deletions(-)
hw/i386/microvm.c +0 -5
index aba0c83219..f257ec5a0b 100644
@@ -458,15 +458,10 @@ static void microvm_machine_state_init(MachineState *machine)
 {
     MicrovmMachineState *mms = MICROVM_MACHINE(machine);
     X86MachineState *x86ms = X86_MACHINE(machine);
-    Error *local_err = NULL;
 
     microvm_memory_init(mms);
 
     x86_cpus_init(x86ms, CPU_VERSION_LATEST);
-    if (local_err) {
-        error_report_err(local_err);
-        exit(1);
-    }
 
     microvm_devices_init(mms);
 }
Signature · 1 line
2.31.1
Reviewed-by on v1 11/16
#34 lore raw

Re: [PATCH 11/16] microvm: Drop dead error handling in microvm_machine_state_init()

In reply to Markus Armbruster
Quoted 8 lines · Markus Armbruster

Stillborn in commit 0ebf007dda "hw/i386: Introduce the microvm machine type".

---
 hw/i386/microvm.c | 5 -----
 1 file changed, 5 deletions(-)
Reviewed-by on v1 11/16
#35 lore raw

Re: [PATCH 11/16] microvm: Drop dead error handling in microvm_machine_state_init()

In reply to Markus Armbruster
Quoted 30 lines

Stillborn in commit 0ebf007dda "hw/i386: Introduce the microvm machine type".

---
 hw/i386/microvm.c | 5 -----
 1 file changed, 5 deletions(-)
hw/i386/microvm.c +0 -6
index aba0c83219..f257ec5a0b 100644
@@ -458,15 +458,10 @@ static void microvm_machine_state_init(MachineState *machine)
 {
     MicrovmMachineState *mms = MICROVM_MACHINE(machine);
     X86MachineState *x86ms = X86_MACHINE(machine);
-    Error *local_err = NULL;
 
     microvm_memory_init(mms);
 
     x86_cpus_init(x86ms, CPU_VERSION_LATEST);
-    if (local_err) {
-        error_report_err(local_err);
-        exit(1);
-    }
 
     microvm_devices_init(mms);
 }
--
Quoted 1 line

2.31.1

#36 lore raw

PATCH 12/16 vhost: Clean up how VhostOpts method vhost_get_config() fails

In reply to Markus Armbruster

vhost_user_get_config() can fail without setting an error. Unclean. Its caller vhost_dev_get_config() compensates by substituting a generic error then. Goes back to commit 50de51387f "vhost:
Distinguish errors in vhost_dev_get_config()".

Clean up by moving the generic error from vhost_dev_get_config() to all the failure paths that neglect to set an error.

Cc Kevin Wolf <[email protected]>
Cc Michael S. Tsirkin <[email protected]>
---
 hw/virtio/vhost-user.c |  2 ++
 hw/virtio/vhost.c      | 10 ++--------
 2 files changed, 4 insertions(+), 8 deletions(-)
hw/virtio/vhost-user.c +2 -0
index 29ea2b4fce..dbbd6fbc25 100644
@@ -2139,10 +2139,12 @@ static int vhost_user_get_config(struct vhost_dev *dev, uint8_t *config,
     msg.payload.config.offset = 0;
     msg.payload.config.size = config_len;
     if (vhost_user_write(dev, &msg, NULL, 0) < 0) {
+        error_setg_errno(errp, -EPROTO, "vhost_get_config failed");
         return -EPROTO;
     }
 
     if (vhost_user_read(dev, &msg) < 0) {
+        error_setg_errno(errp, -EPROTO, "vhost_get_config failed");
         return -EPROTO;
     }
 
hw/virtio/vhost.c +2 -8
index dbbc6b6915..88f8a397dc 100644
@@ -1564,17 +1564,11 @@ void vhost_ack_features(struct vhost_dev *hdev, const int *feature_bits,
 int vhost_dev_get_config(struct vhost_dev *hdev, uint8_t *config,
                          uint32_t config_len, Error **errp)
 {
-    ERRP_GUARD();
-    int ret;
-
     assert(hdev->vhost_ops);
 
     if (hdev->vhost_ops->vhost_get_config) {
-        ret = hdev->vhost_ops->vhost_get_config(hdev, config, config_len, errp);
-        if (ret < 0 && !*errp) {
-            error_setg_errno(errp, -ret, "vhost_get_config failed");
-        }
-        return ret;
+        return hdev->vhost_ops->vhost_get_config(hdev, config, config_len,
+                                                 errp);
     }
 
     error_setg(errp, "vhost_get_config not implemented");
Signature · 1 line
2.31.1
#37 lore raw

Re: [PATCH 12/16] vhost: Clean up how VhostOpts method vhost_get_config() fails

Quoted 22 lines · Markus Armbruster

vhost_user_get_config() can fail without setting an error. Unclean. Its caller vhost_dev_get_config() compensates by substituting a generic error then. Goes back to commit 50de51387f "vhost:
Distinguish errors in vhost_dev_get_config()".

Clean up by moving the generic error from vhost_dev_get_config() to all the failure paths that neglect to set an error.

Cc Kevin Wolf <[email protected]>
Cc Michael S. Tsirkin <[email protected]>
---
 hw/virtio/vhost-user.c |  2 ++
 hw/virtio/vhost.c      | 10 ++--------
 2 files changed, 4 insertions(+), 8 deletions(-)
hw/virtio/vhost-user.c +0 -0
index 29ea2b4fce..dbbd6fbc25 100644
@@ -2139,10 +2139,12 @@ static int vhost_user_get_config(struct vhost_dev *dev, uint8_t *config,
     msg.payload.config.offset = 0;

hw/virtio/vhost-user.c static int vhost_user_get_config(struct vhost_dev *dev, uint8_t *config, · line 2149

Quoted 10 lines
hw/virtio/vhost-user.c +2 -0
     msg.payload.config.size = config_len;
     if (vhost_user_write(dev, &msg, NULL, 0) < 0) {
+        error_setg_errno(errp, -EPROTO, "vhost_get_config failed");
         return -EPROTO;
     }
 
     if (vhost_user_read(dev, &msg) < 0) {
+        error_setg_errno(errp, -EPROTO, "vhost_get_config failed");
         return -EPROTO;
     }

Oops, should be error_setg_errno(EPROTO)!

#38 lore raw

Re: [PATCH 12/16] vhost: Clean up how VhostOpts method vhost_get_config() fails

Quoted 29 lines · Philippe Mathieu-Daudé
Quoted 28 lines · Markus Armbruster

vhost_user_get_config() can fail without setting an error. Unclean. Its caller vhost_dev_get_config() compensates by substituting a generic error then. Goes back to commit 50de51387f "vhost:
Distinguish errors in vhost_dev_get_config()".

Clean up by moving the generic error from vhost_dev_get_config() to all the failure paths that neglect to set an error.

Cc Kevin Wolf <[email protected]>
Cc Michael S. Tsirkin <[email protected]>
---
 hw/virtio/vhost-user.c |  2 ++
 hw/virtio/vhost.c      | 10 ++--------
 2 files changed, 4 insertions(+), 8 deletions(-)
hw/virtio/vhost-user.c +1 -0
index 29ea2b4fce..dbbd6fbc25 100644
@@ -2139,10 +2139,12 @@ static int vhost_user_get_config(struct vhost_dev *dev, uint8_t *config,
     msg.payload.config.offset = 0;
     msg.payload.config.size = config_len;
     if (vhost_user_write(dev, &msg, NULL, 0) < 0) {
+        error_setg_errno(errp, -EPROTO, "vhost_get_config failed");
         return -EPROTO;
     }
 
Quoted 6 lines

hw/virtio/vhost-user.c static int vhost_user_get_config(struct vhost_dev *dev, uint8_t *config, · line 2149

Quoted 4 lines
hw/virtio/vhost-user.c +1 -0
     if (vhost_user_read(dev, &msg) < 0) {
+        error_setg_errno(errp, -EPROTO, "vhost_get_config failed");
         return -EPROTO;
     }

Oops, should be error_setg_errno(EPROTO)!

D'oh! Thanks!

Reviewed-by on v1 12/16
#39 lore raw

Re: [PATCH 12/16] vhost: Clean up how VhostOpts method vhost_get_config() fails

In reply to Markus Armbruster
Quoted 8 lines · Markus Armbruster

vhost_user_get_config() can fail without setting an error. Unclean. Its caller vhost_dev_get_config() compensates by substituting a generic error then. Goes back to commit 50de51387f "vhost:
Distinguish errors in vhost_dev_get_config()".

Clean up by moving the generic error from vhost_dev_get_config() to all the failure paths that neglect to set an error.

Quoted 7 lines
Cc Kevin Wolf <[email protected]>
Cc Michael S. Tsirkin <[email protected]>
---
 hw/virtio/vhost-user.c |  2 ++
 hw/virtio/vhost.c      | 10 ++--------
 2 files changed, 4 insertions(+), 8 deletions(-)
#40 lore raw

PATCH 13/16 vhost: Clean up how VhostOpts method vhost_backend_init() fails

In reply to Markus Armbruster

vhost_user_backend_init() can fail without setting an error. Unclean. Its caller vhost_dev_init() compensates by substituting a generic error then. Goes back to commit 28770ff935 "vhost: Distinguish errors in vhost_backend_init()".

Clean up by moving the generic error from vhost_dev_init() to all the failure paths that neglect to set an error.

Cc Kevin Wolf <[email protected]>
Cc Michael S. Tsirkin <[email protected]>
---
 hw/virtio/vhost-user.c | 6 ++++++
 hw/virtio/vhost.c      | 4 ----
 2 files changed, 6 insertions(+), 4 deletions(-)
hw/virtio/vhost-user.c +6 -0
index dbbd6fbc25..b4a4998088 100644
@@ -1876,6 +1876,7 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque,
 
     err = vhost_user_get_features(dev, &features);
     if (err < 0) {
+        error_setg_errno(errp, -err, "vhost_backend_init failed");
         return err;
     }
 
@@ -1885,6 +1886,7 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque,
         err = vhost_user_get_u64(dev, VHOST_USER_GET_PROTOCOL_FEATURES,
                                  &protocol_features);
         if (err < 0) {
+            error_setg_errno(errp, EPROTO, "vhost_backend_init failed");
             return -EPROTO;
         }
 
@@ -1903,6 +1905,7 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque,
 
         err = vhost_user_set_protocol_features(dev, dev->protocol_features);
         if (err < 0) {
+            error_setg_errno(errp, EPROTO, "vhost_backend_init failed");
             return -EPROTO;
         }
 
@@ -1911,6 +1914,7 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque,
             err = vhost_user_get_u64(dev, VHOST_USER_GET_QUEUE_NUM,
                                      &dev->max_queues);
             if (err < 0) {
+                error_setg_errno(errp, EPROTO, "vhost_backend_init failed");
                 return -EPROTO;
             }
         } else {
@@ -1940,6 +1944,7 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque,
         } else {
             err = vhost_user_get_max_memslots(dev, &ram_slots);
             if (err < 0) {
+                error_setg_errno(errp, EPROTO, "vhost_backend_init failed");
                 return -EPROTO;
             }
 
@@ -1966,6 +1971,7 @@ static int vhost_user_backend_init(struct vhost_dev *dev, void *opaque,
     if (dev->vq_index == 0) {
         err = vhost_setup_slave_channel(dev);
         if (err < 0) {
+            error_setg_errno(errp, EPROTO, "vhost_backend_init failed");
             return -EPROTO;
         }
     }
hw/virtio/vhost.c +0 -4
index 88f8a397dc..3c0b537f89 100644
@@ -1289,7 +1289,6 @@ int vhost_dev_init(struct vhost_dev *hdev, void *opaque,
                    VhostBackendType backend_type, uint32_t busyloop_timeout,
                    Error **errp)
 {
-    ERRP_GUARD();
     uint64_t features;
     int i, r, n_initialized_vqs = 0;
 
@@ -1301,9 +1300,6 @@ int vhost_dev_init(struct vhost_dev *hdev, void *opaque,
 
     r = hdev->vhost_ops->vhost_backend_init(hdev, opaque, errp);
     if (r < 0) {
-        if (!*errp) {
-            error_setg_errno(errp, -r, "vhost_backend_init failed");
-        }
         goto fail;
     }
 
Signature · 1 line
2.31.1
Reviewed-by on v1 13/16
#41 lore raw

Re: [PATCH 13/16] vhost: Clean up how VhostOpts method vhost_backend_init() fails

Quoted 8 lines · Markus Armbruster

vhost_user_backend_init() can fail without setting an error. Unclean. Its caller vhost_dev_init() compensates by substituting a generic error then. Goes back to commit 28770ff935 "vhost: Distinguish errors in vhost_backend_init()".

Clean up by moving the generic error from vhost_dev_init() to all the failure paths that neglect to set an error.

Quoted 7 lines
Cc Kevin Wolf <[email protected]>
Cc Michael S. Tsirkin <[email protected]>
---
 hw/virtio/vhost-user.c | 6 ++++++
 hw/virtio/vhost.c      | 4 ----
 2 files changed, 6 insertions(+), 4 deletions(-)
#42 lore raw

PATCH 14/16 Remove superfluous ERRP_GUARD()

In reply to Markus Armbruster

Macro ERRP_GUARD() is only needed when we want to dereference @errp or pass it to error_prepend() or error_append_hint(). Delete superfluous ones.

---
 hw/remote/mpqemu-link.c  |  3 ---
 qga/commands-posix-ssh.c | 17 -----------------
 qga/commands-win32.c     |  1 -
 softmmu/vl.c             |  1 -
 ui/console.c             |  1 -
 5 files changed, 23 deletions(-)
hw/remote/mpqemu-link.c +0 -3
index e67a5de72c..7e841820e5 100644
@@ -34,7 +34,6 @@
  */
 bool mpqemu_msg_send(MPQemuMsg *msg, QIOChannel *ioc, Error **errp)
 {
-    ERRP_GUARD();
     bool iolock = qemu_mutex_iothread_locked();
     bool iothread = qemu_in_iothread();
     struct iovec send[2] = {};
@@ -97,7 +96,6 @@ bool mpqemu_msg_send(MPQemuMsg *msg, QIOChannel *ioc, Error **errp)
 static ssize_t mpqemu_read(QIOChannel *ioc, void *buf, size_t len, int **fds,
                            size_t *nfds, Error **errp)
 {
-    ERRP_GUARD();
     struct iovec iov = { .iov_base = buf, .iov_len = len };
     bool iolock = qemu_mutex_iothread_locked();
     bool iothread = qemu_in_iothread();
@@ -192,7 +190,6 @@ fail:
 uint64_t mpqemu_msg_send_and_await_reply(MPQemuMsg *msg, PCIProxyDev *pdev,
                                          Error **errp)
 {
-    ERRP_GUARD();
     MPQemuMsg msg_reply = {0};
     uint64_t ret = UINT64_MAX;
 
qga/commands-posix-ssh.c +0 -17
index 2dda136d64..f3a580b8cc 100644
@@ -45,8 +45,6 @@ get_passwd_entry(const char *username, Error **errp)
     g_autoptr(GError) err = NULL;
     struct passwd *p;
 
-    ERRP_GUARD();
-
     p = g_unix_get_passwd_entry_qemu(username, &err);
     if (p == NULL) {
         error_setg(errp, "failed to lookup user '%s': %s",
@@ -61,8 +59,6 @@ static bool
 mkdir_for_user(const char *path, const struct passwd *p,
                mode_t mode, Error **errp)
 {
-    ERRP_GUARD();
-
     if (g_mkdir(path, mode) == -1) {
         error_setg(errp, "failed to create directory '%s': %s",
                    path, g_strerror(errno));
@@ -87,8 +83,6 @@ mkdir_for_user(const char *path, const struct passwd *p,
 static bool
 check_openssh_pub_key(const char *key, Error **errp)
 {
-    ERRP_GUARD();
-
     /* simple sanity-check, we may want more? */
     if (!key || key[0] == '#' || strchr(key, '\n')) {
         error_setg(errp, "invalid OpenSSH public key: '%s'", key);
@@ -104,8 +98,6 @@ check_openssh_pub_keys(strList *keys, size_t *nkeys, Error **errp)
     size_t n = 0;
     strList *k;
 
-    ERRP_GUARD();
-
     for (k = keys; k != NULL; k = k->next) {
         if (!check_openssh_pub_key(k->value, errp)) {
             return false;
@@ -126,8 +118,6 @@ write_authkeys(const char *path, const GStrv keys,
     g_autofree char *contents = NULL;
     g_autoptr(GError) err = NULL;
 
-    ERRP_GUARD();
-
     contents = g_strjoinv("\n", keys);
     if (!g_file_set_contents(path, contents, -1, &err)) {
         error_setg(errp, "failed to write to '%s': %s", path, err->message);
@@ -155,8 +145,6 @@ read_authkeys(const char *path, Error **errp)
     g_autoptr(GError) err = NULL;
     g_autofree char *contents = NULL;
 
-    ERRP_GUARD();
-
     if (!g_file_get_contents(path, &contents, NULL, &err)) {
         error_setg(errp, "failed to read '%s': %s", path, err->message);
         return NULL;
@@ -178,7 +166,6 @@ qmp_guest_ssh_add_authorized_keys(const char *username, strList *keys,
     strList *k;
     size_t nkeys, nauthkeys;
 
-    ERRP_GUARD();
     reset = has_reset && reset;
 
     if (!check_openssh_pub_keys(keys, &nkeys, errp)) {
@@ -228,8 +215,6 @@ qmp_guest_ssh_remove_authorized_keys(const char *username, strList *keys,
     GStrv a;
     size_t nkeys = 0;
 
-    ERRP_GUARD();
-
     if (!check_openssh_pub_keys(keys, NULL, errp)) {
         return;
     }
@@ -277,8 +262,6 @@ qmp_guest_ssh_get_authorized_keys(const char *username, Error **errp)
     g_autoptr(GuestAuthorizedKeys) ret = NULL;
     int i;
 
-    ERRP_GUARD();
-
     p = get_passwd_entry(username, errp);
     if (p == NULL) {
         return NULL;
qga/commands-win32.c +0 -1
index a099acb34d..a6d2c0d88e 100644
@@ -976,7 +976,6 @@ out:
 
 GuestDiskInfoList *qmp_guest_get_disks(Error **errp)
 {
-    ERRP_GUARD();
     GuestDiskInfoList *ret = NULL;
     HDEVINFO dev_info;
     SP_DEVICE_INTERFACE_DATA dev_iface_data;
softmmu/vl.c +0 -1
index 0d2db1abc3..f9ffeb8d4d 100644
@@ -1539,7 +1539,6 @@ machine_parse_property_opt(QemuOptsList *opts_list, const char *propname,
 {
     QDict *opts, *prop;
     bool help = false;
-    ERRP_GUARD();
 
     prop = keyval_parse(arg, opts_list->implied_opt_name, &help, errp);
     if (help) {
ui/console.c +0 -1
index 5d2e6178ff..eabbbc951c 100644
@@ -1481,7 +1481,6 @@ static bool displaychangelistener_has_dmabuf(DisplayChangeListener *dcl)
 static bool dpy_compatible_with(QemuConsole *con,
                                 DisplayChangeListener *dcl, Error **errp)
 {
-    ERRP_GUARD();
     int flags;
 
     flags = con->hw_ops->get_flags ? con->hw_ops->get_flags(con->hw) : 0;
Signature · 1 line
2.31.1
#43 lore raw

Re: [PATCH 14/16] Remove superfluous ERRP_GUARD()

Cc'ing Marc-André as he recently disagreed with this.

Quoted 162 lines · Markus Armbruster

Macro ERRP_GUARD() is only needed when we want to dereference @errp or pass it to error_prepend() or error_append_hint(). Delete superfluous ones.

---
 hw/remote/mpqemu-link.c  |  3 ---
 qga/commands-posix-ssh.c | 17 -----------------
 qga/commands-win32.c     |  1 -
 softmmu/vl.c             |  1 -
 ui/console.c             |  1 -
 5 files changed, 23 deletions(-)
hw/remote/mpqemu-link.c +0 -3
index e67a5de72c..7e841820e5 100644
@@ -34,7 +34,6 @@
  */
 bool mpqemu_msg_send(MPQemuMsg *msg, QIOChannel *ioc, Error **errp)
 {
-    ERRP_GUARD();
     bool iolock = qemu_mutex_iothread_locked();
     bool iothread = qemu_in_iothread();
     struct iovec send[2] = {};
@@ -97,7 +96,6 @@ bool mpqemu_msg_send(MPQemuMsg *msg, QIOChannel *ioc, Error **errp)
 static ssize_t mpqemu_read(QIOChannel *ioc, void *buf, size_t len, int **fds,
                            size_t *nfds, Error **errp)
 {
-    ERRP_GUARD();
     struct iovec iov = { .iov_base = buf, .iov_len = len };
     bool iolock = qemu_mutex_iothread_locked();
     bool iothread = qemu_in_iothread();
@@ -192,7 +190,6 @@ fail:
 uint64_t mpqemu_msg_send_and_await_reply(MPQemuMsg *msg, PCIProxyDev *pdev,
                                          Error **errp)
 {
-    ERRP_GUARD();
     MPQemuMsg msg_reply = {0};
     uint64_t ret = UINT64_MAX;
 
qga/commands-posix-ssh.c +0 -17
index 2dda136d64..f3a580b8cc 100644
@@ -45,8 +45,6 @@ get_passwd_entry(const char *username, Error **errp)
     g_autoptr(GError) err = NULL;
     struct passwd *p;
 
-    ERRP_GUARD();
-
     p = g_unix_get_passwd_entry_qemu(username, &err);
     if (p == NULL) {
         error_setg(errp, "failed to lookup user '%s': %s",
@@ -61,8 +59,6 @@ static bool
 mkdir_for_user(const char *path, const struct passwd *p,
                mode_t mode, Error **errp)
 {
-    ERRP_GUARD();
-
     if (g_mkdir(path, mode) == -1) {
         error_setg(errp, "failed to create directory '%s': %s",
                    path, g_strerror(errno));
@@ -87,8 +83,6 @@ mkdir_for_user(const char *path, const struct passwd *p,
 static bool
 check_openssh_pub_key(const char *key, Error **errp)
 {
-    ERRP_GUARD();
-
     /* simple sanity-check, we may want more? */
     if (!key || key[0] == '#' || strchr(key, '\n')) {
         error_setg(errp, "invalid OpenSSH public key: '%s'", key);
@@ -104,8 +98,6 @@ check_openssh_pub_keys(strList *keys, size_t *nkeys, Error **errp)
     size_t n = 0;
     strList *k;
 
-    ERRP_GUARD();
-
     for (k = keys; k != NULL; k = k->next) {
         if (!check_openssh_pub_key(k->value, errp)) {
             return false;
@@ -126,8 +118,6 @@ write_authkeys(const char *path, const GStrv keys,
     g_autofree char *contents = NULL;
     g_autoptr(GError) err = NULL;
 
-    ERRP_GUARD();
-
     contents = g_strjoinv("\n", keys);
     if (!g_file_set_contents(path, contents, -1, &err)) {
         error_setg(errp, "failed to write to '%s': %s", path, err->message);
@@ -155,8 +145,6 @@ read_authkeys(const char *path, Error **errp)
     g_autoptr(GError) err = NULL;
     g_autofree char *contents = NULL;
 
-    ERRP_GUARD();
-
     if (!g_file_get_contents(path, &contents, NULL, &err)) {
         error_setg(errp, "failed to read '%s': %s", path, err->message);
         return NULL;
@@ -178,7 +166,6 @@ qmp_guest_ssh_add_authorized_keys(const char *username, strList *keys,
     strList *k;
     size_t nkeys, nauthkeys;
 
-    ERRP_GUARD();
     reset = has_reset && reset;
 
     if (!check_openssh_pub_keys(keys, &nkeys, errp)) {
@@ -228,8 +215,6 @@ qmp_guest_ssh_remove_authorized_keys(const char *username, strList *keys,
     GStrv a;
     size_t nkeys = 0;
 
-    ERRP_GUARD();
-
     if (!check_openssh_pub_keys(keys, NULL, errp)) {
         return;
     }
@@ -277,8 +262,6 @@ qmp_guest_ssh_get_authorized_keys(const char *username, Error **errp)
     g_autoptr(GuestAuthorizedKeys) ret = NULL;
     int i;
 
-    ERRP_GUARD();
-
     p = get_passwd_entry(username, errp);
     if (p == NULL) {
         return NULL;
qga/commands-win32.c +0 -1
index a099acb34d..a6d2c0d88e 100644
@@ -976,7 +976,6 @@ out:
 
 GuestDiskInfoList *qmp_guest_get_disks(Error **errp)
 {
-    ERRP_GUARD();
     GuestDiskInfoList *ret = NULL;
     HDEVINFO dev_info;
     SP_DEVICE_INTERFACE_DATA dev_iface_data;
softmmu/vl.c +0 -1
index 0d2db1abc3..f9ffeb8d4d 100644
@@ -1539,7 +1539,6 @@ machine_parse_property_opt(QemuOptsList *opts_list, const char *propname,
 {
     QDict *opts, *prop;
     bool help = false;
-    ERRP_GUARD();
 
     prop = keyval_parse(arg, opts_list->implied_opt_name, &help, errp);
     if (help) {
ui/console.c +0 -1
index 5d2e6178ff..eabbbc951c 100644
@@ -1481,7 +1481,6 @@ static bool displaychangelistener_has_dmabuf(DisplayChangeListener *dcl)
 static bool dpy_compatible_with(QemuConsole *con,
                                 DisplayChangeListener *dcl, Error **errp)
 {
-    ERRP_GUARD();
     int flags;
 
     flags = con->hw_ops->get_flags ? con->hw_ops->get_flags(con->hw) : 0;
#44 lore raw

PATCH 15/16 vl: Clean up -smp error handling

In reply to Markus Armbruster

The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call.

machine_parse_property_opt() is wrong that way: it passes @errp to keyval_parse() without checking for failure, then passes it to keyval_merge(). Harmless, since the only caller passes &error_fatal.

Clean up: drop the parameter, and use &error_fatal directly.

---
 softmmu/vl.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
softmmu/vl.c +5 -4
index f9ffeb8d4d..ce0ecc736b 100644
@@ -1535,19 +1535,19 @@ static void machine_help_func(const QDict *qdict)
 
 static void
 machine_parse_property_opt(QemuOptsList *opts_list, const char *propname,
-                           const char *arg, Error **errp)
+                           const char *arg)
 {
     QDict *opts, *prop;
     bool help = false;
 
-    prop = keyval_parse(arg, opts_list->implied_opt_name, &help, errp);
+    prop = keyval_parse(arg, opts_list->implied_opt_name, &help, &error_fatal);
     if (help) {
         qemu_opts_print_help(opts_list, true);
         return;
     }
     opts = qdict_new();
     qdict_put(opts, propname, prop);
-    keyval_merge(machine_opts_dict, opts, errp);
+    keyval_merge(machine_opts_dict, opts, &error_fatal);
     qobject_unref(opts);
 }
 
@@ -3321,7 +3321,8 @@ void qemu_init(int argc, char **argv, char **envp)
                 }
                 break;
             case QEMU_OPTION_smp:
-                machine_parse_property_opt(qemu_find_opts("smp-opts"), "smp", optarg, &error_fatal);
+                machine_parse_property_opt(qemu_find_opts("smp-opts"),
+                                           "smp", optarg);
                 break;
             case QEMU_OPTION_vnc:
                 vnc_parse(optarg);
Signature · 1 line
2.31.1
Reviewed-by on v1 15/16
#45 lore raw

Re: [PATCH 15/16] vl: Clean up -smp error handling

Quoted 10 lines · Markus Armbruster

The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call.

machine_parse_property_opt() is wrong that way: it passes @errp to keyval_parse() without checking for failure, then passes it to keyval_merge(). Harmless, since the only caller passes &error_fatal.

Quoted 7 lines

Clean up: drop the parameter, and use &error_fatal directly.

---
 softmmu/vl.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
#46 lore raw

PATCH 16/16 vl: Don't continue after -smp help.

In reply to Markus Armbruster

We continue after -smp help:

    $ qemu-system-x86_64 -smp help -display none -monitor stdio
    smp-opts options:
      cores=<num>
      cpus=<num>
      dies=<num>
      maxcpus=<num>
      sockets=<num>
      threads=<num>
    QEMU 6.0.50 monitor - type 'help' for more information
    (qemu)

Other options, such as -object help and -device help, don't.

Adjust -smp not to continue either.

---
 softmmu/vl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
softmmu/vl.c +1 -1
index ce0ecc736b..8f9d97635a 100644
@@ -1543,7 +1543,7 @@ machine_parse_property_opt(QemuOptsList *opts_list, const char *propname,
     prop = keyval_parse(arg, opts_list->implied_opt_name, &help, &error_fatal);
     if (help) {
         qemu_opts_print_help(opts_list, true);
-        return;
+        exit(0);
     }
     opts = qdict_new();
     qdict_put(opts, propname, prop);
Signature · 1 line
2.31.1
Reviewed-by on v1 16/16
#47 lore raw

Re: [PATCH-for-6.1? 16/16] vl: Don't continue after -smp help.

Quoted 29 lines · Markus Armbruster

We continue after -smp help:

    $ qemu-system-x86_64 -smp help -display none -monitor stdio
    smp-opts options:
      cores=<num>
      cpus=<num>
      dies=<num>
      maxcpus=<num>
      sockets=<num>
      threads=<num>
    QEMU 6.0.50 monitor - type 'help' for more information
    (qemu)

Other options, such as -object help and -device help, don't.

Adjust -smp not to continue either.

---
 softmmu/vl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
softmmu/vl.c +0 -0
index ce0ecc736b..8f9d97635a 100644

softmmu/vl.c machine_parse_property_opt(QemuOptsList *opts_list, const char *propname, · line 1549

Quoted 8 lines
softmmu/vl.c +1 -1
@@ -1543,7 +1543,7 @@ machine_parse_property_opt(QemuOptsList *opts_list, const char *propname,
     prop = keyval_parse(arg, opts_list->implied_opt_name, &help, &error_fatal);
     if (help) {
         qemu_opts_print_help(opts_list, true);
-        return;
+        exit(0);
     }
     opts = qdict_new();
     qdict_put(opts, propname, prop);

Easy one for 6.1.

Reviewed-by on v1 16/16
#48 lore raw

Re: [PATCH 16/16] vl: Don't continue after -smp help.

In reply to Markus Armbruster
Quoted 28 lines

We continue after -smp help:

    $ qemu-system-x86_64 -smp help -display none -monitor stdio
    smp-opts options:
      cores=<num>
      cpus=<num>
      dies=<num>
      maxcpus=<num>
      sockets=<num>
      threads=<num>
    QEMU 6.0.50 monitor - type 'help' for more information
    (qemu)

Other options, such as -object help and -device help, don't.

Adjust -smp not to continue either.

---
 softmmu/vl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
softmmu/vl.c +0 -0
index ce0ecc736b..8f9d97635a 100644

softmmu/vl.c machine_parse_property_opt(QemuOptsList *opts_list, const char *propname,

Quoted 9 lines
softmmu/vl.c +1 -2
@@ -1543,7 +1543,7 @@ machine_parse_property_opt(QemuOptsList *opts_list, const char *propname,
     prop = keyval_parse(arg, opts_list->implied_opt_name, &help, &error_fatal);
     if (help) {
         qemu_opts_print_help(opts_list, true);
-        return;
+        exit(0);
     }
     opts = qdict_new();
     qdict_put(opts, propname, prop);
--
Acked-by on the v1 series
#49 lore raw
In reply to Markus Armbruster
Quoted 21 lines · Markus Armbruster

I doubt the fixes are 6.1 material at this late stage. If you disagree, let me know.

Cc Alex Williamson <[email protected]>
Cc Aravinda Prasad <[email protected]>
Cc Cornelia Huck <[email protected]>
Cc Daniel P. Berrangé <[email protected]>
Cc David Gibson <[email protected]>
Cc Dr. David Alan Gilbert <[email protected]>
Cc Eduardo Habkost <[email protected]>
Cc Elena Ufimtseva <[email protected]>
Cc Ganesh Goudar <[email protected]>
Cc Gerd Hoffmann <[email protected]>
Cc Jagannathan Raman <[email protected]>
Cc John G Johnson <[email protected]>
Cc Juan Quintela <[email protected]>
Cc Kamil Rytarowski <[email protected]>
Cc Kevin Wolf <[email protected]>
Cc Kirti Wankhede <[email protected]>
Cc Marc-André Lureau <[email protected]>
Cc Marcelo Tosatti <[email protected]>
Quoted 8 lines
Cc Michael S. Tsirkin <[email protected]>
Cc Paolo Bonzini <[email protected]>
Cc Peter Xu <[email protected]>
Cc Reinoud Zandijk <[email protected]>
Cc Sergio Lopez <[email protected]>
Cc Stefan Hajnoczi <[email protected]>
Cc Sunil Muthuswamy <[email protected]>
Cc Thomas Huth <[email protected]>

agree it's not 6.1 material

Quoted 47 lines

Markus Armbruster (16):
error: Use error_fatal to simplify obvious fatal errors (again)
spapr: Plug memory leak when we can't add a migration blocker
spapr: Explain purpose of ->fwnmi_migration_blocker more clearly
multi-process: Fix pci_proxy_dev_realize() error handling
vhost-scsi: Plug memory leak on migrate_add_blocker() failure
i386: Never free migration blocker objects instead of sometimes
vfio: Avoid error_propagate() after migrate_add_blocker() whpx nvmm: Drop useless migrate_del_blocker()
migration: Unify failure check for migrate_add_blocker()
migration: Handle migration_incoming_setup() errors consistently
microvm: Drop dead error handling in microvm_machine_state_init()
vhost: Clean up how VhostOpts method vhost_get_config() fails
vhost: Clean up how VhostOpts method vhost_backend_init() fails Remove superfluous ERRP_GUARD()
vl: Clean up -smp error handling
vl: Don't continue after -smp help.

 backends/tpm/tpm_emulator.c |  3 +--
 hw/display/qxl.c            |  8 ++++----
 hw/i386/microvm.c           |  5 -----
 hw/ppc/spapr_events.c       | 20 ++++++++++----------
 hw/remote/mpqemu-link.c     |  3 ---
 hw/remote/proxy.c           | 10 +++++++++-
 hw/s390x/ipl.c              |  6 +-----
 hw/scsi/vhost-scsi.c        |  4 ++--
 hw/vfio/migration.c         |  6 ++----
 hw/virtio/vhost-user.c      |  8 ++++++++
 hw/virtio/vhost.c           | 16 +++-------------
 migration/migration.c       | 34 ++++++++++------------------------
 qemu-img.c                  |  6 +-----
 qemu-io.c                   |  6 +-----
 qemu-nbd.c                  |  5 +----
 qga/commands-posix-ssh.c    | 17 -----------------
 qga/commands-win32.c        |  1 -
 scsi/qemu-pr-helper.c       | 11 +++--------
 softmmu/vl.c                | 19 +++++++------------
 target/i386/kvm/kvm.c       |  9 +++------
 target/i386/nvmm/nvmm-all.c |  4 +---
 target/i386/sev.c           |  8 +-------
 target/i386/whpx/whpx-all.c |  4 +---
 ui/console.c                |  7 ++-----
 ui/spice-core.c             |  7 +------
 25 files changed, 72 insertions(+), 155 deletions(-)
Signature · 1 line
2.31.1
#50 lore raw
In reply to Markus Armbruster
Quoted 2 lines · Markus Armbruster

I doubt the fixes are 6.1 material at this late stage. If you disagree, let me know.

PATCH 16 has become commit 3e61a13af3. Remainder queued for 6.2; additional review is welcome all the same.

Thanks, guys!