Skip to contentSkip to conversation

controlling CPU speed on N800/N810

DISCUSSION Kalle Valo 2 participants 3 messages Apr 4, 2009

lore
Share & tools
lore

Kalle Valo

author
#0 lore raw

Hello,

I'm about to do some throughput measurements with stlc45xx (the open wi-fi driver) on Nokia N800. Now I would like see the current CPU speed. I also liked to change it, because I believe it will have an affect on throughput.

I tried cpufreq but it wasn't very helpful:

/sys/devices/system/cpu/cpu0/cpufreq# cat cpuinfo_cur_freq <unknown>/sys/devices/system/cpu/cpu0/cpufreq#

Is it possible to change CPU speed in latest linux-omap kernels?

I'm using N800 and omap-2.6.29 branch from linux-omap tree.

Signature · 1 line
Kalle Valo
#1 lore raw

Hi,

Quoted 1 line · ext Kalle Valo

Is it possible to change CPU speed in latest linux-omap kernels?

afaik, no, but that makes your job easier, the ARM clock should be 330MHz - at least that's what TI supports and recommends when also the DSP is in use

Signature · 6 lines
Cheers, Igor

---

Igor Stoppa
Maemo Software - Nokia Devices R&D - Helsinki
author
#2 lore raw
Quoted 8 lines · Igor Stoppa

Hi,

Quoted 1 line · ext Kalle Valo

Is it possible to change CPU speed in latest linux-omap kernels?

afaik, no, but that makes your job easier, the ARM clock should be 330MHz - at least that's what TI supports and recommends when also the DSP is in use

Ok, thanks for the info.

I got better wi-fi throughput with nokia 2.6.21 kernel compared to linux-omap kernels, but the CPU speed difference will most likely explain that. I'm assuming that DVFS increased the CPU speed over 400 MHz when running throughtput tests on nokia 2.6.21 kernel.

If anyone have hints or pointers how to overclock linux-omap kernels, I'm all ears :)

Signature · 1 line
Kalle Valo