controlling CPU speed on N800/N810
Hello,
I'm about to do some throughput measurements with stlc45xx (the open wi-fi driver) on Nokia N800. Now I would like see the current CPU speed. I also liked to change it, because I believe it will have an affect on throughput.
I tried cpufreq but it wasn't very helpful:
/sys/devices/system/cpu/cpu0/cpufreq# cat cpuinfo_cur_freq <unknown>/sys/devices/system/cpu/cpu0/cpufreq#
Is it possible to change CPU speed in latest linux-omap kernels?
I'm using N800 and omap-2.6.29 branch from linux-omap tree.
Signature · 1 line
Kalle Valo
Hi,
Quoted 1 line · ext Kalle Valo
Is it possible to change CPU speed in latest linux-omap kernels?
afaik, no, but that makes your job easier, the ARM clock should be 330MHz - at least that's what TI supports and recommends when also the DSP is in use
Signature · 6 lines
Cheers, Igor --- Igor Stoppa Maemo Software - Nokia Devices R&D - Helsinki
Quoted 8 lines · Igor Stoppa
Hi,
Quoted 1 line · ext Kalle Valo
Is it possible to change CPU speed in latest linux-omap kernels?
afaik, no, but that makes your job easier, the ARM clock should be 330MHz - at least that's what TI supports and recommends when also the DSP is in use
Ok, thanks for the info.
I got better wi-fi throughput with nokia 2.6.21 kernel compared to linux-omap kernels, but the CPU speed difference will most likely explain that. I'm assuming that DVFS increased the CPU speed over 400 MHz when running throughtput tests on nokia 2.6.21 kernel.
If anyone have hints or pointers how to overclock linux-omap kernels, I'm all ears :)
Signature · 1 line
Kalle Valo