2.4.16: Bizarre TCP throughput problems
Quoted 6 lines
cbgb-2.4.16 pern NFS/UDP ~12 MB/s, .5s to copy a 5MB file
cbgb-2.4.14 pern HTTP/TCP 12 MB/s, .5s to copy a 5MB file
cbgb-2.4.16 pern HTTP/TCP 7.45 KB/s, 300s to copy a 2MB file
Could you try:
- if concurrent flood pings between cbgb an dpern improve the throughput with 2.4.16 and HTTP?
# ping -f pern or # ping -f cbdb
- Could you check what happens with 2.4.16 if you revert to the tulip driver from 2.4.14?
Copy the entire linux/drivers/net/tulip/ directory from 2.4.16 into 2.4.14.
--
Manfred
Quoted 7 lines · Manfred Spraul
Could you try:
- if concurrent flood pings between cbgb an dpern improve the throughput with 2.4.16 and HTTP?# ping -f pern or # ping -f cbdb
This didn't seem to make a difference.
Quoted 2 lines
- Could you check what happens with 2.4.16 if you revert to the tulip driver from 2.4.14?
This definitely made a difference. I compiled the 2.4.14 tulip.o as a module for the 2.4.16 kernel. If I insmod the 2.4.14 version, TCP throughput is fine. If I take the interface down then insmod the 2.4.16 version, TCP throughput is very poor.
Regards,
Signature · 4 lines
Dave Carrigan ([email protected]) | Yow! If I pull this SWITCH I'll UNIX-Apache-Perl-Linux-Firewalls-LDAP-C-DNS | be RITA HAYWORTH!! Or a Seattle, WA, USA | SCIENTOLOGIST! http://www.rudedog.org/ |