Skip to contentSkip to conversation

2.4.16: Bizarre TCP throughput problems

DISCUSSION Manfred Spraul 2 participants 2 messages Dec 9, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 6 lines

cbgb-2.4.16 pern NFS/UDP ~12 MB/s, .5s to copy a 5MB file
cbgb-2.4.14 pern HTTP/TCP 12 MB/s, .5s to copy a 5MB file
cbgb-2.4.16 pern HTTP/TCP 7.45 KB/s, 300s to copy a 2MB file

Could you try:
- if concurrent flood pings between cbgb an dpern improve the throughput with 2.4.16 and HTTP?

# ping -f pern
or
# ping -f cbdb

- Could you check what happens with 2.4.16 if you revert to the tulip driver from 2.4.14?

Copy the entire linux/drivers/net/tulip/ directory from 2.4.16 into 2.4.14.

--
Manfred

#1 lore raw
Quoted 7 lines · Manfred Spraul

Could you try:
- if concurrent flood pings between cbgb an dpern improve the throughput with 2.4.16 and HTTP?

 # ping -f pern
or
# ping -f cbdb

This didn't seem to make a difference.

Quoted 2 lines

- Could you check what happens with 2.4.16 if you revert to the tulip driver from 2.4.14?

This definitely made a difference. I compiled the 2.4.14 tulip.o as a module for the 2.4.16 kernel. If I insmod the 2.4.14 version, TCP throughput is fine. If I take the interface down then insmod the 2.4.16 version, TCP throughput is very poor.

Regards,

Signature · 4 lines
Dave Carrigan ([email protected])            | Yow! If I pull this SWITCH I'll
UNIX-Apache-Perl-Linux-Firewalls-LDAP-C-DNS | be RITA HAYWORTH!!  Or a
Seattle, WA, USA                            | SCIENTOLOGIST!
http://www.rudedog.org/                     |