Clean up and fix no_user
v4 cover Clean up and fix no_user
From: Markus Armbruster <[email protected]>
In an ideal world, machines can be built by wiring devices together with configuration, not code. Unfortunately, that's not the world we live in right now. We still have quite a few devices that need to be wired up by code. If you try to device_add such a device, it'll fail in sometimes mysterious ways. If you're lucky, you get an unmysterious immediate crash.
We used to protect users from such badness by marking devices where device_add cannot possibly work "no-user", and refusing to device_add them. Anthony silently broke the protection in v1.1. He has rejected attempts to unbreak it with the argument that the protection makes it impossible to wire devices together with configuration, not code, and that the protection is being misused[*].
On the former, I disagree. The problem isn't protecting users from devices that cannot be wired up that way, it's devices that cannot be wired up that way.
On the latter, Anthony has a point: the purpose of the no-user flag isn't obvious, and some of its uses are suspect.
So, instead of just fixing the regression, this series first addresses that point. PATCH 1 clarifies the purpose of no-user. PATCH 2-9 clean up and document its use. PATCH 10 fixes the regression.
The series makes following devices available with device_add:
* PCI [PATCH 07-08]: piix3-ide, piix3-ide-xen, piix4-ide, via-ide
* ISA [PATCH 09]: i8042, isa-fdc
The following devices are made unavailable:
* PCI [PATCH 05]: dec-21154, e500-host-bridge, gt64120_pci, mch, pbm-pci, ppc4xx-host-bridge, sh_pci_host, u3-agp, uni-north-agp, uni-north-internal-pci, uni-north-pci, versatile_pci_host
* Sysbus [PATCH 02]: ARM,bitband-memory, SUNW,CS4231, SUNW,fdtwo, SUNW,tcx, a15mpcore_priv, a9-scu, a9mpcore_priv, apc, arm11mpcore_priv, cadence_gem, cadence_ttc, cadence_uart, cfi.pflash01, cfi.pflash02, cuda, dec-21154-sysbus, ds1225y, e500-ccsr, e500-pcihost, e500-spin, eccmemctl, empty_slot, escc, esp, etraxfs,pic, etraxfs,serial, etraxfs,timer, etraxfs-eth, exynos4210-ehci-usb, exynos4210.combiner, exynos4210.fimd, exynos4210.gic, exynos4210.i2c, exynos4210.irq_gate, exynos4210.mct, exynos4210.pmu, exynos4210.pwm, exynos4210.rtc, exynos4210.uart, fusbh200-ehci-usb, generic-sdhci, gpio_i2c, grlib,apbuart, grlib,gptimer, grlib,irqmp, gt64120, highbank-regs, icc-bridge, imx-serial, imx.epit, imx.gpt, imx_avic, imx_ccm, integrator_core, integrator_pic, integrator_pit, iommu, jazz-led, lan9118, lance, lm32-juart, lm32-pic, lm32-sys, lm32-timer, lm32-uart, m48t59, macio-ide, macio-nvram, macio_idreg, mainstone-fpga, memory, milkymist-ac97, milkymist-hpdmc, milkymist-memcard, milkymist-minimac2, milkymist-pfpu, milkymist-softusb, milkymist-sysctl, milkymist-tmu2, milkymist-uart, milkymist-vgafb, mips-malta, mipsnet, mmio-ide, mpc8544-guts, musicpal-misc, musicpal_gpio, musicpal_key, musicpal_lcd, mv88w8618_audio, mv88w8618_eth, mv88w8618_flashcfg, mv88w8618_pic, mv88w8618_pit, mv88w8618_wlan, omap-gpio, omap-intc, omap2-gpio, omap2-intc, omap_i2c, onenand, open_eth, openpic, openprom, pbm, pl011, pl011_luminary, pl022, pl050_keyboard, pl050_mouse, pl061, pl061_luminary, pl330, ppc4xx-pcihost, puv3_dma, puv3_gpio, puv3_intc, puv3_ost, puv3_pm, pxa25x-timer, pxa27x-timer, pxa2xx-dma, pxa2xx-gpio, pxa2xx-ssp, pxa2xx_i2c, pxa2xx_pic, pxa2xx_rtc, q35-pcihost, realview_gic, realview_mpcore, realview_pci, realview_sysctl, s390-sclp-event-facility, scoop, sh_pci, sl-nand, slavio_intctl, slavio_misc, slavio_timer, smc91c111, sp804, spapr-pci-host-bridge, sparc32_dma, spitz-keyboard, stellaris-adc, stellaris-gptm, stellaris-i2c, stellaris_enet, strongarm-gpio, strongarm-ppc, strongarm-rtc, strongarm-ssp, strongarm-uart, strongarm_pic, sysbus-ahci, sysbus-fdc, sysbus-g364, sysbus-ohci, tcx_afx, tegra2-ehci-usb, tusb6010, u3-agp-pcihost, uni-north-agp-pcihost, uni-north-internal-pci-pcihost, uni-north-pci-pcihost, versatile_i2c, versatile_pci, virtio-mmio, xgmac, xics, xilinx,zynq_slcr, xlnx,ps7-usb, xlnx.axi-dma, xlnx.ps7-qspi, xlnx.ps7-spi, xlnx.xps-ethernetlite, xlnx.xps-intc, xlnx.xps-spi, xlnx.xps-timer, xlnx.xps-uartlite
v4: straightforward rebase (only PATCH 10/10 conflicts)
v3: address Eric Blake's and Marcel Apfelbaum's review
* Clean up a harmless editing accident in PATCH 07
* Simplify PATCH 10 slightly
v2: address Peter Maydell's review
* Some commit messages improved
* Use QOM cast macros instead of .parent_class [PATCH 05]
* keep cannot_instantiate_with_device_add_yet for port92, isa-pit, kvm-pit, m48t59_isa, mc146818rtc [PATCH 09]
Markus Armbruster (10):
qdev: Replace no_user by cannot_instantiate_with_device_add_yet
sysbus: Set cannot_instantiate_with_device_add_yet
cpu: Document why cannot_instantiate_with_device_add_yet
apic: Document why cannot_instantiate_with_device_add_yet
pci-host: Consistently set cannot_instantiate_with_device_add_yet
ich9: Document why cannot_instantiate_with_device_add_yet piix3 piix4: Clean up use of cannot_instantiate_with_device_add_yet
vt82c686: Clean up use of cannot_instantiate_with_device_add_yet
isa: Clean up use of cannot_instantiate_with_device_add_yet
qdev: Do not let the user try to device_add when it cannot work
hw/acpi/piix4.c | 6 +++++- hw/alpha/typhoon.c | 2 -- hw/arm/versatilepb.c | 1 - hw/audio/pcspk.c | 3 ++- hw/audio/pl041.c | 1 - hw/block/fdc.c | 1 - hw/core/sysbus.c | 7 +++++++ hw/display/pl110.c | 1 - hw/dma/pl080.c | 1 - hw/i2c/smbus_ich9.c | 6 +++++- hw/i386/kvm/clock.c | 1 - hw/i386/kvmvapic.c | 1 - hw/i386/pc.c | 7 ++++++- hw/ide/piix.c | 3 --- hw/ide/via.c | 1 - hw/input/pckbd.c | 1 - hw/input/vmmouse.c | 3 ++- hw/intc/apic_common.c | 6 +++++- hw/intc/arm_gic.c | 1 - hw/intc/arm_gic_common.c | 1 - hw/intc/arm_gic_kvm.c | 1 - hw/intc/i8259_common.c | 8 +++++++- hw/intc/ioapic_common.c | 1 - hw/intc/pl190.c | 1 - hw/isa/isa-bus.c | 1 - hw/isa/lpc_ich9.c | 7 +++++-- hw/isa/piix4.c | 6 +++++- hw/isa/vt82c686.c | 6 +++++- hw/mips/gt64xxx_pci.c | 6 ++++++ hw/misc/arm_l2x0.c | 1 - hw/misc/vmport.c | 3 ++- hw/nvram/fw_cfg.c | 1 - hw/pci-bridge/dec.c | 6 ++++++ hw/pci-host/apb.c | 6 ++++++ hw/pci-host/bonito.c | 8 +++++--- hw/pci-host/grackle.c | 8 +++++--- hw/pci-host/piix.c | 19 +++++++++++++++---- hw/pci-host/ppce500.c | 5 +++++ hw/pci-host/prep.c | 7 +++++-- hw/pci-host/q35.c | 5 +++++ hw/pci-host/uninorth.c | 24 ++++++++++++++++++++++++ hw/pci-host/versatile.c | 6 ++++++ hw/ppc/ppc4xx_pci.c | 5 +++++ hw/ppc/spapr_vio.c | 2 -- hw/s390x/ipl.c | 1 - hw/s390x/s390-virtio-bus.c | 2 -- hw/s390x/virtio-ccw.c | 2 -- hw/sd/pl181.c | 1 - hw/sh4/sh_pci.c | 6 ++++++ hw/timer/arm_mptimer.c | 1 - hw/timer/hpet.c | 1 - hw/timer/i8254_common.c | 7 ++++++- hw/timer/m48t59.c | 3 ++- hw/timer/mc146818rtc.c | 3 ++- hw/timer/pl031.c | 1 - include/hw/qdev-core.h | 13 ++++++++++++- qdev-monitor.c | 10 ++++++++-- qom/cpu.c | 6 +++++- 58 files changed, 190 insertions(+), 64 deletions(-)
Signature · 1 line
1.8.1.4
PATCH v4 1/10 qdev: Replace no_user by cannot_instantiate_with_device_add_yet
From: Markus Armbruster <[email protected]>
In an ideal world, machines can be built by wiring devices together with configuration, not code. Unfortunately, that's not the world we live in right now. We still have quite a few devices that need to be wired up by code. If you try to device_add such a device, it'll fail in sometimes mysterious ways. If you're lucky, you get an unmysterious immediate crash.
To protect users from such badness, DeviceClass member no_user used to make device models unavailable with -device / device_add, but that regressed in commit 18b6dad. The device model is still omitted from help, but is available anyway.
Attempts to fix the regression have been rejected with the argument that the purpose of no_user isn't clear, and it's prone to misuse.
This commit clarifies no_user's purpose. Anthony suggested to rename it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which I shorten somewhat to keep checkpatch happy. While there, make it bool.
Every use of cannot_instantiate_with_device_add_yet gets a FIXME comment asking for rationale. The next few commits will clean them all up, either by providing a rationale, or by getting rid of the use.
With that done, the regression fix is hopefully acceptable.
--- hw/acpi/piix4.c | 2 +- hw/alpha/typhoon.c | 2 +- hw/arm/versatilepb.c | 2 +- hw/audio/pcspk.c | 2 +- hw/audio/pl041.c | 2 +- hw/block/fdc.c | 2 +- hw/display/pl110.c | 2 +- hw/dma/pl080.c | 2 +- hw/i2c/smbus_ich9.c | 2 +- hw/i386/kvm/clock.c | 2 +- hw/i386/kvmvapic.c | 2 +- hw/i386/pc.c | 2 +- hw/ide/piix.c | 6 +++--- hw/ide/via.c | 2 +- hw/input/pckbd.c | 2 +- hw/input/vmmouse.c | 2 +- hw/intc/apic_common.c | 2 +- hw/intc/arm_gic.c | 2 +- hw/intc/arm_gic_common.c | 2 +- hw/intc/arm_gic_kvm.c | 2 +- hw/intc/i8259_common.c | 2 +- hw/intc/ioapic_common.c | 2 +- hw/intc/pl190.c | 2 +- hw/isa/isa-bus.c | 2 +- hw/isa/lpc_ich9.c | 2 +- hw/isa/piix4.c | 2 +- hw/isa/vt82c686.c | 2 +- hw/misc/arm_l2x0.c | 2 +- hw/misc/vmport.c | 2 +- hw/nvram/fw_cfg.c | 2 +- hw/pci-host/bonito.c | 4 ++-- hw/pci-host/grackle.c | 4 ++-- hw/pci-host/piix.c | 8 ++++---- hw/pci-host/prep.c | 4 ++-- hw/ppc/spapr_vio.c | 2 +- hw/s390x/ipl.c | 2 +- hw/s390x/s390-virtio-bus.c | 2 +- hw/s390x/virtio-ccw.c | 2 +- hw/sd/pl181.c | 2 +- hw/timer/arm_mptimer.c | 2 +- hw/timer/hpet.c | 2 +- hw/timer/i8254_common.c | 2 +- hw/timer/m48t59.c | 2 +- hw/timer/mc146818rtc.c | 2 +- hw/timer/pl031.c | 2 +- include/hw/qdev-core.h | 13 ++++++++++++- qdev-monitor.c | 5 +++-- qom/cpu.c | 2 +- 48 files changed, 69 insertions(+), 57 deletions(-)
hw/acpi/piix4.c +1 -1
@@ -544,7 +544,7 @@ static void piix4_pm_class_init(ObjectClass *klass, void *data) k->revision =0x03 ; k->class_id =PCI_CLASS_BRIDGE_OTHER ; dc->desc ="PM" ; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_acpi; dc->props = piix4_pm_properties; }
hw/alpha/typhoon.c +1 -1
@@ -938,7 +938,7 @@ static void typhoon_pcihost_class_init(ObjectClass *klass, void *data)SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); k->init = typhoon_pcihost_init; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo typhoon_pcihost_info = {
hw/arm/versatilepb.c +1 -1
@@ -390,7 +390,7 @@ static void vpb_sic_class_init(ObjectClass *klass, void *data)SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); k->init = vpb_sic_init; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_vpb_sic; }
hw/audio/pcspk.c +1 -1
@@ -192,7 +192,7 @@ static void pcspk_class_initfn(ObjectClass *klass, void *data) dc->realize = pcspk_realizefn;set_bit (DEVICE_CATEGORY_SOUND , dc->categories); - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->props = pcspk_properties; }
hw/audio/pl041.c +1 -1
@@ -632,7 +632,7 @@ static void pl041_device_class_init(ObjectClass *klass, void *data) k->init = pl041_init;set_bit (DEVICE_CATEGORY_SOUND , dc->categories); - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->reset = pl041_device_reset; dc->vmsd = &vmstate_pl041; dc->props = pl041_device_properties;
hw/block/fdc.c +1 -1
@@ -2234,7 +2234,7 @@ static void isabus_fdc_class_init(ObjectClass *klass, void *data) dc->realize = isabus_fdc_realize; dc->fw_name ="fdc" ; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->reset = fdctrl_external_reset_isa; dc->vmsd = &vmstate_isa_fdc; dc->props = isa_fdc_properties;
hw/display/pl110.c +1 -1
@@ -496,7 +496,7 @@ static void pl110_class_init(ObjectClass *klass, void *data) k->init = pl110_initfn;set_bit (DEVICE_CATEGORY_DISPLAY , dc->categories); - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_pl110; }
hw/dma/pl080.c +1 -1
@@ -381,7 +381,7 @@ static void pl080_class_init(ObjectClass *oc, void *data) {DeviceClass *dc =DEVICE_CLASS (oc); - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_pl080; }
hw/i2c/smbus_ich9.c +1 -1
@@ -97,7 +97,7 @@ static void ich9_smb_class_init(ObjectClass *klass, void *data) k->device_id =PCI_DEVICE_ID_INTEL_ICH9_6 ; k->revision =ICH9_A2_SMB_REVISION ; k->class_id =PCI_CLASS_SERIAL_SMBUS ; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_ich9_smbus; dc->desc ="ICH9 SMBUS Bridge" ; k->init = ich9_smbus_initfn;
hw/i386/kvm/clock.c +1 -1
@@ -114,7 +114,7 @@ static void kvmclock_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = kvmclock_realize; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &kvmclock_vmsd; }
hw/i386/kvmvapic.c +1 -1
@@ -827,7 +827,7 @@ static void vapic_class_init(ObjectClass *klass, void *data) {DeviceClass *dc =DEVICE_CLASS (klass); - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->reset = vapic_reset; dc->vmsd = &vmstate_vapic; dc->realize = vapic_realize;
hw/i386/pc.c +1 -1
@@ -547,7 +547,7 @@ static void port92_class_initfn(ObjectClass *klass, void *data) {DeviceClass *dc =DEVICE_CLASS (klass); - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->realize = port92_realizefn; dc->reset = port92_reset; dc->vmsd = &vmstate_port92_isa;
hw/ide/piix.c +3 -3
@@ -248,7 +248,7 @@ static void piix3_ide_class_init(ObjectClass *klass, void *data) k->device_id =PCI_DEVICE_ID_INTEL_82371SB_1 ; k->class_id =PCI_CLASS_STORAGE_IDE ;set_bit (DEVICE_CATEGORY_STORAGE , dc->categories); - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo piix3_ide_info = {
@@ -267,7 +267,7 @@ static void piix3_ide_xen_class_init(ObjectClass *klass, void *data) k->device_id =PCI_DEVICE_ID_INTEL_82371SB_1 ; k->class_id =PCI_CLASS_STORAGE_IDE ;set_bit (DEVICE_CATEGORY_STORAGE , dc->categories); - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->unplug = pci_piix3_xen_ide_unplug; }
@@ -289,7 +289,7 @@ static void piix4_ide_class_init(ObjectClass *klass, void *data) k->device_id =PCI_DEVICE_ID_INTEL_82371AB ; k->class_id =PCI_CLASS_STORAGE_IDE ;set_bit (DEVICE_CATEGORY_STORAGE , dc->categories); - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo piix4_ide_info = {
hw/ide/via.c +1 -1
@@ -225,7 +225,7 @@ static void via_ide_class_init(ObjectClass *klass, void *data) k->revision =0x06 ; k->class_id =PCI_CLASS_STORAGE_IDE ;set_bit (DEVICE_CATEGORY_STORAGE , dc->categories); - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo via_ide_info = {
hw/input/pckbd.c +1 -1
@@ -522,7 +522,7 @@ static void i8042_class_initfn(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = i8042_realizefn; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_kbd_isa; }
hw/input/vmmouse.c +1 -1
@@ -282,7 +282,7 @@ static void vmmouse_class_initfn(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = vmmouse_realizefn; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->reset = vmmouse_reset; dc->vmsd = &vmstate_vmmouse; dc->props = vmmouse_properties;
hw/intc/apic_common.c +1 -1
@@ -386,7 +386,7 @@ static void apic_common_class_init(ObjectClass *klass, void *data) dc->vmsd = &vmstate_apic_common; dc->reset = apic_reset_common; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->props = apic_properties_common; idc->init = apic_init_common; }
hw/intc/arm_gic.c +1 -1
@@ -704,7 +704,7 @@ static void arm_gic_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass);ARMGICClass *agc =ARM_GIC_CLASS (klass); - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ agc->parent_realize = dc->realize; dc->realize = arm_gic_realize; }
hw/intc/arm_gic_common.c +1 -1
@@ -156,7 +156,7 @@ static void arm_gic_common_class_init(ObjectClass *klass, void *data) dc->realize = arm_gic_common_realize; dc->props = arm_gic_common_properties; dc->vmsd = &vmstate_gic; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo arm_gic_common_type = {
hw/intc/arm_gic_kvm.c +1 -1
@@ -150,7 +150,7 @@ static void kvm_arm_gic_class_init(ObjectClass *klass, void *data) kgc->parent_reset = dc->reset; dc->realize = kvm_arm_gic_realize; dc->reset = kvm_arm_gic_reset; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo kvm_arm_gic_info = {
hw/intc/i8259_common.c +1 -1
@@ -135,7 +135,7 @@ static void pic_common_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->vmsd = &vmstate_pic_common; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->props = pic_properties_common; dc->realize = pic_common_realize; }
hw/intc/ioapic_common.c +1 -1
@@ -98,7 +98,7 @@ static void ioapic_common_class_init(ObjectClass *klass, void *data) dc->realize = ioapic_common_realize; dc->vmsd = &vmstate_ioapic_common; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo ioapic_common_type = {
hw/intc/pl190.c +1 -1
@@ -273,7 +273,7 @@ static void pl190_class_init(ObjectClass *klass, void *data)SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); k->init = pl190_init; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->reset = pl190_reset; dc->vmsd = &vmstate_pl190; }
hw/isa/isa-bus.c +1 -1
@@ -197,7 +197,7 @@ static void isabus_bridge_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->fw_name ="isa" ; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo isabus_bridge_info = {
hw/isa/lpc_ich9.c +1 -1
@@ -644,7 +644,7 @@ static void ich9_lpc_class_init(ObjectClass *klass, void *data) dc->reset = ich9_lpc_reset; k->init = ich9_lpc_initfn; dc->vmsd = &vmstate_ich9_lpc; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ k->config_write = ich9_lpc_config_write; dc->desc ="ICH9 LPC bridge" ; k->vendor_id =PCI_VENDOR_ID_INTEL ;
hw/isa/piix4.c +1 -1
@@ -113,7 +113,7 @@ static void piix4_class_init(ObjectClass *klass, void *data) k->device_id =PCI_DEVICE_ID_INTEL_82371AB_0 ; k->class_id =PCI_CLASS_BRIDGE_ISA ; dc->desc ="ISA bridge" ; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_piix4; }
hw/isa/vt82c686.c +1 -1
@@ -480,7 +480,7 @@ static void via_class_init(ObjectClass *klass, void *data) k->class_id =PCI_CLASS_BRIDGE_ISA ; k->revision =0x40 ; dc->desc ="ISA bridge" ; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_via; }
hw/misc/arm_l2x0.c +1 -1
@@ -179,7 +179,7 @@ static void l2x0_class_init(ObjectClass *klass, void *data) k->init = l2x0_priv_init; dc->vmsd = &vmstate_l2x0; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->props = l2x0_properties; dc->reset = l2x0_priv_reset; }
hw/misc/vmport.c +1 -1
@@ -162,7 +162,7 @@ static void vmport_class_initfn(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = vmport_realizefn; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo vmport_info = {
hw/nvram/fw_cfg.c +1 -1
@@ -599,7 +599,7 @@ static void fw_cfg_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = fw_cfg_realize; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->reset = fw_cfg_reset; dc->vmsd = &vmstate_fw_cfg; dc->props = fw_cfg_properties;
hw/pci-host/bonito.c +2 -2
@@ -806,7 +806,7 @@ static void bonito_class_init(ObjectClass *klass, void *data) k->revision =0x01 ; k->class_id =PCI_CLASS_BRIDGE_HOST ; dc->desc ="Host bridge" ; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_bonito; }
@@ -823,7 +823,7 @@ static void bonito_pcihost_class_init(ObjectClass *klass, void *data)SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); k->init = bonito_pcihost_initfn; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo bonito_pcihost_info = {
hw/pci-host/grackle.c +2 -2
@@ -130,7 +130,7 @@ static void grackle_pci_class_init(ObjectClass *klass, void *data) k->device_id =PCI_DEVICE_ID_MOTOROLA_MPC106 ; k->revision =0x00 ; k->class_id =PCI_CLASS_BRIDGE_HOST ; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo grackle_pci_info = {
@@ -146,7 +146,7 @@ static void pci_grackle_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); k->init = pci_grackle_init_device; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo grackle_pci_host_info = {
hw/pci-host/piix.c +4 -4
@@ -653,7 +653,7 @@ static void piix3_class_init(ObjectClass *klass, void *data) dc->desc ="ISA bridge" ; dc->vmsd = &vmstate_piix3; - dc->no_user =1 , + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ k->no_hotplug =1 ; k->init = piix3_initfn; k->config_write = piix3_write_config;
@@ -677,7 +677,7 @@ static void piix3_xen_class_init(ObjectClass *klass, void *data) dc->desc ="ISA bridge" ; dc->vmsd = &vmstate_piix3; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ k->no_hotplug =1 ; k->init = piix3_initfn; k->config_write = piix3_write_config_xen;
@@ -707,7 +707,7 @@ static void i440fx_class_init(ObjectClass *klass, void *data) k->revision =0x02 ; k->class_id =PCI_CLASS_BRIDGE_HOST ; dc->desc ="Host bridge" ; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_i440fx; }
@@ -745,7 +745,7 @@ static void i440fx_pcihost_class_init(ObjectClass *klass, void *data) hc->root_bus_path = i440fx_pcihost_root_bus_path; dc->realize = i440fx_pcihost_realize; dc->fw_name ="pci" ; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->props = i440fx_props; }
hw/pci-host/prep.c +2 -2
@@ -198,7 +198,7 @@ static void raven_class_init(ObjectClass *klass, void *data) k->class_id =PCI_CLASS_BRIDGE_HOST ; dc->desc ="PReP Host Bridge - Motorola Raven" ; dc->vmsd = &vmstate_raven; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo raven_info = {
@@ -215,7 +215,7 @@ static void raven_pcihost_class_init(ObjectClass *klass, void *data)set_bit (DEVICE_CATEGORY_BRIDGE , dc->categories); dc->realize = raven_pcihost_realizefn; dc->fw_name ="pci" ; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo raven_pcihost_info = {
hw/ppc/spapr_vio.c +1 -1
@@ -532,7 +532,7 @@ static void spapr_vio_bridge_class_init(ObjectClass *klass, void *data)SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); k->init = spapr_vio_bridge_init; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo spapr_vio_bridge_info = {
hw/s390x/ipl.c +1 -1
@@ -182,7 +182,7 @@ static void s390_ipl_class_init(ObjectClass *klass, void *data) k->init = s390_ipl_init; dc->props = s390_ipl_properties; dc->reset = s390_ipl_reset; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo s390_ipl_info = {
hw/s390x/s390-virtio-bus.c +1 -1
@@ -680,7 +680,7 @@ static void s390_virtio_bridge_class_init(ObjectClass *klass, void *data)SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); k->init = s390_virtio_bridge_init; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo s390_virtio_bridge_info = {
hw/s390x/virtio-ccw.c +1 -1
@@ -1278,7 +1278,7 @@ static void virtual_css_bridge_class_init(ObjectClass *klass, void *data)SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); k->init = virtual_css_bridge_init; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo virtual_css_bridge_info = {
hw/sd/pl181.c +1 -1
@@ -506,7 +506,7 @@ static void pl181_class_init(ObjectClass *klass, void *data) sdc->init = pl181_init; k->vmsd = &vmstate_pl181; k->reset = pl181_reset; - k->no_user =1 ; + k->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo pl181_info = {
hw/timer/arm_mptimer.c +1 -1
@@ -274,7 +274,7 @@ static void arm_mptimer_class_init(ObjectClass *klass, void *data) dc->realize = arm_mptimer_realize; dc->vmsd = &vmstate_arm_mptimer; dc->reset = arm_mptimer_reset; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->props = arm_mptimer_properties; }
hw/timer/hpet.c +1 -1
@@ -751,7 +751,7 @@ static void hpet_device_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = hpet_realize; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->reset = hpet_reset; dc->vmsd = &vmstate_hpet; dc->props = hpet_device_properties;
hw/timer/i8254_common.c +1 -1
@@ -282,7 +282,7 @@ static void pit_common_class_init(ObjectClass *klass, void *data) dc->realize = pit_common_realize; dc->vmsd = &vmstate_pit_common; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo pit_common_type = {
hw/timer/m48t59.c +1 -1
@@ -750,7 +750,7 @@ static void m48t59_isa_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = m48t59_isa_realize; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->reset = m48t59_reset_isa; dc->props = m48t59_isa_properties; }
hw/timer/mc146818rtc.c +1 -1
@@ -899,7 +899,7 @@ static void rtc_class_initfn(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = rtc_realizefn; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_rtc; dc->props = mc146818rtc_properties; }
hw/timer/pl031.c +1 -1
@@ -251,7 +251,7 @@ static void pl031_class_init(ObjectClass *klass, void *data)SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); k->init = pl031_init; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_pl031; }
include/hw/qdev-core.h +12 -1
@@ -97,7 +97,18 @@ typedef struct DeviceClass {const char *fw_name;const char *desc;Property *props; -int no_user; + +/* +* Shall we hide this device model from -device / device_add? +* All devices should support instantiation with device_add, and +* this flag should not exist. But we're not there, yet. Some +* devices fail to instantiate with cryptic error messages. +* Others instantiate, but don't work. Exposing users to such +* behavior would be cruel; this flag serves to protect them. It +* should never be set without a comment explaining why it is set. +* TODO remove once we're there +*/ +bool cannot_instantiate_with_device_add_yet;/* callbacks */ void (*reset)(DeviceState *dev);
qdev-monitor.c +3 -2
@@ -87,7 +87,7 @@ static void qdev_print_devinfo(DeviceClass *dc)if (dc->desc) {error_printf (", desc \"%s\"" , dc->desc); } -if (dc->no_user) { +if (dc->cannot_instantiate_with_device_add_yet) {error_printf (", no-user" ); }error_printf ("\n" );
@@ -127,7 +127,8 @@ static void qdev_print_devinfos(bool show_no_user)if ((i <DEVICE_CATEGORY_MAX ? !test_bit (i, dc->categories) : !bitmap_empty (dc->categories,DEVICE_CATEGORY_MAX )) - || (!show_no_user && dc->no_user)) { + || (!show_no_user + && dc->cannot_instantiate_with_device_add_yet)) {continue ; }if (!cat_printed) {
qom/cpu.c +1 -1
@@ -254,7 +254,7 @@ static void cpu_class_init(ObjectClass *klass, void *data) k->gdb_read_register = cpu_common_gdb_read_register; k->gdb_write_register = cpu_common_gdb_write_register; dc->realize = cpu_common_realizefn; - dc->no_user =1 ; + dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo cpu_type_info = {
Signature · 1 line
1.8.1.4
PATCH v4 2/10 sysbus: Set cannot_instantiate_with_device_add_yet
In reply to [email protected]From: Markus Armbruster <[email protected]>
device_add plugs devices into suitable bus. For "real" buses, that actually connects the device. For sysbus, the connections need to be made separately, and device_add can't do that. The device would be left unconnected, and could not possibly work.
Quite a few, but not all sysbus devices already set cannot_instantiate_with_device_add_yet in their class init function.
Set it in their abstract base's class init function sysbus_device_class_init(), and remove the now redundant assignments from device class init functions.
--- hw/alpha/typhoon.c | 2 -- hw/arm/versatilepb.c | 1 - hw/audio/pl041.c | 1 - hw/core/sysbus.c | 7 +++++++ hw/display/pl110.c | 1 - hw/dma/pl080.c | 1 - hw/i386/kvm/clock.c | 1 - hw/i386/kvmvapic.c | 1 - hw/intc/arm_gic.c | 1 - hw/intc/arm_gic_common.c | 1 - hw/intc/arm_gic_kvm.c | 1 - hw/intc/ioapic_common.c | 1 - hw/intc/pl190.c | 1 - hw/isa/isa-bus.c | 1 - hw/misc/arm_l2x0.c | 1 - hw/nvram/fw_cfg.c | 1 - hw/pci-host/bonito.c | 2 -- hw/pci-host/grackle.c | 2 -- hw/pci-host/piix.c | 1 - hw/pci-host/prep.c | 1 - hw/ppc/spapr_vio.c | 2 -- hw/s390x/ipl.c | 1 - hw/s390x/s390-virtio-bus.c | 2 -- hw/s390x/virtio-ccw.c | 2 -- hw/sd/pl181.c | 1 - hw/timer/arm_mptimer.c | 1 - hw/timer/hpet.c | 1 - hw/timer/pl031.c | 1 - 28 files changed, 7 insertions(+), 33 deletions(-)
hw/alpha/typhoon.c +0 -2
@@ -934,11 +934,9 @@ static int typhoon_pcihost_init(SysBusDevice *dev)static void typhoon_pcihost_class_init (ObjectClass *klass,void *data) { -DeviceClass *dc =DEVICE_CLASS (klass);SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); k->init = typhoon_pcihost_init; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo typhoon_pcihost_info = {
hw/arm/versatilepb.c +0 -1
@@ -390,7 +390,6 @@ static void vpb_sic_class_init(ObjectClass *klass, void *data)SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); k->init = vpb_sic_init; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_vpb_sic; }
hw/audio/pl041.c +0 -1
@@ -632,7 +632,6 @@ static void pl041_device_class_init(ObjectClass *klass, void *data) k->init = pl041_init;set_bit (DEVICE_CATEGORY_SOUND , dc->categories); - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->reset = pl041_device_reset; dc->vmsd = &vmstate_pl041; dc->props = pl041_device_properties;
hw/core/sysbus.c +7 -0
@@ -257,6 +257,13 @@ static void sysbus_device_class_init(ObjectClass *klass, void *data)DeviceClass *k =DEVICE_CLASS (klass); k->init = sysbus_device_init; k->bus_type =TYPE_SYSTEM_BUS ; +/* +* device_add plugs devices into suitable bus. For "real" buses, +* that actually connects the device. For sysbus, the connections +* need to be made separately, and device_add can't do that. The +* device would be left unconncected, and could not possibly work. +*/ + k->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo sysbus_device_type_info = {
hw/display/pl110.c +0 -1
@@ -496,7 +496,6 @@ static void pl110_class_init(ObjectClass *klass, void *data) k->init = pl110_initfn;set_bit (DEVICE_CATEGORY_DISPLAY , dc->categories); - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_pl110; }
hw/dma/pl080.c +0 -1
@@ -381,7 +381,6 @@ static void pl080_class_init(ObjectClass *oc, void *data) {DeviceClass *dc =DEVICE_CLASS (oc); - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_pl080; }
hw/i386/kvm/clock.c +0 -1
@@ -114,7 +114,6 @@ static void kvmclock_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = kvmclock_realize; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &kvmclock_vmsd; }
hw/i386/kvmvapic.c +0 -1
@@ -827,7 +827,6 @@ static void vapic_class_init(ObjectClass *klass, void *data) {DeviceClass *dc =DEVICE_CLASS (klass); - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->reset = vapic_reset; dc->vmsd = &vmstate_vapic; dc->realize = vapic_realize;
hw/intc/arm_gic.c +0 -1
@@ -704,7 +704,6 @@ static void arm_gic_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass);ARMGICClass *agc =ARM_GIC_CLASS (klass); - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ agc->parent_realize = dc->realize; dc->realize = arm_gic_realize; }
hw/intc/arm_gic_common.c +0 -1
@@ -156,7 +156,6 @@ static void arm_gic_common_class_init(ObjectClass *klass, void *data) dc->realize = arm_gic_common_realize; dc->props = arm_gic_common_properties; dc->vmsd = &vmstate_gic; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo arm_gic_common_type = {
hw/intc/arm_gic_kvm.c +0 -1
@@ -150,7 +150,6 @@ static void kvm_arm_gic_class_init(ObjectClass *klass, void *data) kgc->parent_reset = dc->reset; dc->realize = kvm_arm_gic_realize; dc->reset = kvm_arm_gic_reset; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo kvm_arm_gic_info = {
hw/intc/ioapic_common.c +0 -1
@@ -98,7 +98,6 @@ static void ioapic_common_class_init(ObjectClass *klass, void *data) dc->realize = ioapic_common_realize; dc->vmsd = &vmstate_ioapic_common; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo ioapic_common_type = {
hw/intc/pl190.c +0 -1
@@ -273,7 +273,6 @@ static void pl190_class_init(ObjectClass *klass, void *data)SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); k->init = pl190_init; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->reset = pl190_reset; dc->vmsd = &vmstate_pl190; }
hw/isa/isa-bus.c +0 -1
@@ -197,7 +197,6 @@ static void isabus_bridge_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->fw_name ="isa" ; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo isabus_bridge_info = {
hw/misc/arm_l2x0.c +0 -1
@@ -179,7 +179,6 @@ static void l2x0_class_init(ObjectClass *klass, void *data) k->init = l2x0_priv_init; dc->vmsd = &vmstate_l2x0; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->props = l2x0_properties; dc->reset = l2x0_priv_reset; }
hw/nvram/fw_cfg.c +0 -1
@@ -599,7 +599,6 @@ static void fw_cfg_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = fw_cfg_realize; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->reset = fw_cfg_reset; dc->vmsd = &vmstate_fw_cfg; dc->props = fw_cfg_properties;
hw/pci-host/bonito.c +0 -2
@@ -819,11 +819,9 @@ static const TypeInfo bonito_info = {static void bonito_pcihost_class_init (ObjectClass *klass,void *data) { -DeviceClass *dc =DEVICE_CLASS (klass);SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); k->init = bonito_pcihost_initfn; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo bonito_pcihost_info = {
hw/pci-host/grackle.c +0 -2
@@ -143,10 +143,8 @@ static const TypeInfo grackle_pci_info = {static void pci_grackle_class_init (ObjectClass *klass,void *data) {SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); -DeviceClass *dc =DEVICE_CLASS (klass); k->init = pci_grackle_init_device; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo grackle_pci_host_info = {
hw/pci-host/piix.c +0 -1
@@ -745,7 +745,6 @@ static void i440fx_pcihost_class_init(ObjectClass *klass, void *data) hc->root_bus_path = i440fx_pcihost_root_bus_path; dc->realize = i440fx_pcihost_realize; dc->fw_name ="pci" ; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->props = i440fx_props; }
hw/pci-host/prep.c +0 -1
@@ -215,7 +215,6 @@ static void raven_pcihost_class_init(ObjectClass *klass, void *data)set_bit (DEVICE_CATEGORY_BRIDGE , dc->categories); dc->realize = raven_pcihost_realizefn; dc->fw_name ="pci" ; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo raven_pcihost_info = {
hw/ppc/spapr_vio.c +0 -2
@@ -528,11 +528,9 @@ static int spapr_vio_bridge_init(SysBusDevice *dev)static void spapr_vio_bridge_class_init (ObjectClass *klass,void *data) { -DeviceClass *dc =DEVICE_CLASS (klass);SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); k->init = spapr_vio_bridge_init; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo spapr_vio_bridge_info = {
hw/s390x/ipl.c +0 -1
@@ -182,7 +182,6 @@ static void s390_ipl_class_init(ObjectClass *klass, void *data) k->init = s390_ipl_init; dc->props = s390_ipl_properties; dc->reset = s390_ipl_reset; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo s390_ipl_info = {
hw/s390x/s390-virtio-bus.c +0 -2
@@ -676,11 +676,9 @@ static int s390_virtio_bridge_init(SysBusDevice *dev)static void s390_virtio_bridge_class_init (ObjectClass *klass,void *data) { -DeviceClass *dc =DEVICE_CLASS (klass);SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); k->init = s390_virtio_bridge_init; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo s390_virtio_bridge_info = {
hw/s390x/virtio-ccw.c +0 -2
@@ -1274,11 +1274,9 @@ static int virtual_css_bridge_init(SysBusDevice *dev)static void virtual_css_bridge_class_init (ObjectClass *klass,void *data) { -DeviceClass *dc =DEVICE_CLASS (klass);SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); k->init = virtual_css_bridge_init; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo virtual_css_bridge_info = {
hw/sd/pl181.c +0 -1
@@ -506,7 +506,6 @@ static void pl181_class_init(ObjectClass *klass, void *data) sdc->init = pl181_init; k->vmsd = &vmstate_pl181; k->reset = pl181_reset; - k->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo pl181_info = {
hw/timer/arm_mptimer.c +0 -1
@@ -274,7 +274,6 @@ static void arm_mptimer_class_init(ObjectClass *klass, void *data) dc->realize = arm_mptimer_realize; dc->vmsd = &vmstate_arm_mptimer; dc->reset = arm_mptimer_reset; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->props = arm_mptimer_properties; }
hw/timer/hpet.c +0 -1
@@ -751,7 +751,6 @@ static void hpet_device_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = hpet_realize; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->reset = hpet_reset; dc->vmsd = &vmstate_hpet; dc->props = hpet_device_properties;
hw/timer/pl031.c +0 -1
@@ -251,7 +251,6 @@ static void pl031_class_init(ObjectClass *klass, void *data)SysBusDeviceClass *k =SYS_BUS_DEVICE_CLASS (klass); k->init = pl031_init; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_pl031; }
Signature · 1 line
1.8.1.4
Re: [Qemu-devel] [PATCH v4 02/10] sysbus: Set cannot_instantiate_with_device_add_yet
Am 28.11.2013 17:26, schrieb [email protected]:
hw/core/sysbus.c static void sysbus_device_class_init(ObjectClass *klass, void *data) · line 264
Quoted 13 lines
hw/core/sysbus.c +5
-0@@ -257,6 +257,13 @@ static void sysbus_device_class_init(ObjectClass *klass, void *data)DeviceClass *k =DEVICE_CLASS (klass); k->init = sysbus_device_init; k->bus_type =TYPE_SYSTEM_BUS ; +/* +* device_add plugs devices into suitable bus. For "real" buses, +* that actually connects the device. For sysbus, the connections +* need to be made separately, and device_add can't do that. The +* device would be left unconncected, and could not possibly work.
"unconnected" - fixed.
Andreas
Quoted 5 lines
hw/core/sysbus.c +2
-0+*/ + k->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo sysbus_device_type_info = {
Signature · 2 lines
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
PATCH v4 3/10 cpu: Document why cannot_instantiate_with_device_add_yet
In reply to [email protected]From: Markus Armbruster <[email protected]>
--- qom/cpu.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
qom/cpu.c +5 -1
@@ -254,7 +254,11 @@ static void cpu_class_init(ObjectClass *klass, void *data) k->gdb_read_register = cpu_common_gdb_read_register; k->gdb_write_register = cpu_common_gdb_write_register; dc->realize = cpu_common_realizefn; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ +/* +* Reason: CPUs still need special care by board code: wiring up +* IRQs, adding reset handlers, halting non-first CPUS, ... +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo cpu_type_info = {
Signature · 1 line
1.8.1.4
PATCH v4 4/10 apic: Document why cannot_instantiate_with_device_add_yet
In reply to [email protected]From: Markus Armbruster <[email protected]>
--- hw/intc/apic_common.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
hw/intc/apic_common.c +5 -1
@@ -386,9 +386,13 @@ static void apic_common_class_init(ObjectClass *klass, void *data) dc->vmsd = &vmstate_apic_common; dc->reset = apic_reset_common; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->props = apic_properties_common; idc->init = apic_init_common; +/* +* Reason: APIC and CPU need to be wired up by +* x86_cpu_apic_create() +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo apic_common_type = {
Signature · 1 line
1.8.1.4
PATCH v4 5/10 pci-host: Consistently set cannot_instantiate_with_device_add_yet
In reply to [email protected]From: Markus Armbruster <[email protected]>
Many PCI host bridges consist of a sysbus device and a PCI device. You need both for the thing to work. Arguably, these bridges should be modelled as a single, composite devices instead of pairs of seemingly independent devices you can only use together, but we're not there, yet.
Since the sysbus part can't be instantiated with device_add, yet, permitting it with the PCI part is useless. We shouldn't offer useless options to the user, so let's set cannot_instantiate_with_device_add_yet for them.
It's already set for Bonito, grackle, i440FX, and raven. Document why.
Set it for the others: dec-21154, e500-host-bridge, gt64120_pci, mch, pbm-pci, ppc4xx-host-bridge, sh_pci_host, u3-agp, uni-north-agp, uni-north-internal-pci, uni-north-pci, and versatile_pci_host.
--- hw/mips/gt64xxx_pci.c | 6 ++++++ hw/pci-bridge/dec.c | 6 ++++++ hw/pci-host/apb.c | 6 ++++++ hw/pci-host/bonito.c | 6 +++++- hw/pci-host/grackle.c | 6 +++++- hw/pci-host/piix.c | 6 +++++- hw/pci-host/ppce500.c | 5 +++++ hw/pci-host/prep.c | 6 +++++- hw/pci-host/q35.c | 5 +++++ hw/pci-host/uninorth.c | 24 ++++++++++++++++++++++++ hw/pci-host/versatile.c | 6 ++++++ hw/ppc/ppc4xx_pci.c | 5 +++++ hw/sh4/sh_pci.c | 6 ++++++ 13 files changed, 89 insertions(+), 4 deletions(-)
hw/mips/gt64xxx_pci.c +6 -0
@@ -1151,12 +1151,18 @@ static int gt64120_pci_init(PCIDevice *d)static void gt64120_pci_class_init (ObjectClass *klass,void *data) {PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); +DeviceClass *dc =DEVICE_CLASS (klass); k->init = gt64120_pci_init; k->vendor_id =PCI_VENDOR_ID_MARVELL ; k->device_id =PCI_DEVICE_ID_MARVELL_GT6412X ; k->revision =0x10 ; k->class_id =PCI_CLASS_BRIDGE_HOST ; +/* +* PCI-facing part of the host bridge, not usable without the +* host-facing part, which can't be device_add'ed, yet. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo gt64120_pci_info = {
hw/pci-bridge/dec.c +6 -0
@@ -116,6 +116,7 @@ static int dec_21154_pci_host_init(PCIDevice *d)static void dec_21154_pci_host_class_init (ObjectClass *klass,void *data) {PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); +DeviceClass *dc =DEVICE_CLASS (klass); k->init = dec_21154_pci_host_init; k->vendor_id =PCI_VENDOR_ID_DEC ;
@@ -123,6 +124,11 @@ static void dec_21154_pci_host_class_init(ObjectClass *klass, void *data) k->revision =0x02 ; k->class_id =PCI_CLASS_BRIDGE_PCI ; k->is_bridge =1 ; +/* +* PCI-facing part of the host bridge, not usable without the +* host-facing part, which can't be device_add'ed, yet. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo dec_21154_pci_host_info = {
hw/pci-host/apb.c +6 -0
@@ -516,11 +516,17 @@ static int pbm_pci_host_init(PCIDevice *d)static void pbm_pci_host_class_init (ObjectClass *klass,void *data) {PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); +DeviceClass *dc =DEVICE_CLASS (klass); k->init = pbm_pci_host_init; k->vendor_id =PCI_VENDOR_ID_SUN ; k->device_id =PCI_DEVICE_ID_SUN_SABRE ; k->class_id =PCI_CLASS_BRIDGE_HOST ; +/* +* PCI-facing part of the host bridge, not usable without the +* host-facing part, which can't be device_add'ed, yet. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo pbm_pci_host_info = {
hw/pci-host/bonito.c +5 -1
@@ -806,8 +806,12 @@ static void bonito_class_init(ObjectClass *klass, void *data) k->revision =0x01 ; k->class_id =PCI_CLASS_BRIDGE_HOST ; dc->desc ="Host bridge" ; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_bonito; +/* +* PCI-facing part of the host bridge, not usable without the +* host-facing part, which can't be device_add'ed, yet. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo bonito_info = {
hw/pci-host/grackle.c +5 -1
@@ -130,7 +130,11 @@ static void grackle_pci_class_init(ObjectClass *klass, void *data) k->device_id =PCI_DEVICE_ID_MOTOROLA_MPC106 ; k->revision =0x00 ; k->class_id =PCI_CLASS_BRIDGE_HOST ; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ +/* +* PCI-facing part of the host bridge, not usable without the +* host-facing part, which can't be device_add'ed, yet. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo grackle_pci_info = {
hw/pci-host/piix.c +5 -1
@@ -707,8 +707,12 @@ static void i440fx_class_init(ObjectClass *klass, void *data) k->revision =0x02 ; k->class_id =PCI_CLASS_BRIDGE_HOST ; dc->desc ="Host bridge" ; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_i440fx; +/* +* PCI-facing part of the host bridge, not usable without the +* host-facing part, which can't be device_add'ed, yet. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo i440fx_info = {
hw/pci-host/ppce500.c +5 -0
@@ -387,6 +387,11 @@ static void e500_host_bridge_class_init(ObjectClass *klass, void *data) k->device_id =PCI_DEVICE_ID_MPC8533E ; k->class_id =PCI_CLASS_PROCESSOR_POWERPC ; dc->desc ="Host bridge" ; +/* +* PCI-facing part of the host bridge, not usable without the +* host-facing part, which can't be device_add'ed, yet. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo e500_host_bridge_info = {
hw/pci-host/prep.c +5 -1
@@ -198,7 +198,11 @@ static void raven_class_init(ObjectClass *klass, void *data) k->class_id =PCI_CLASS_BRIDGE_HOST ; dc->desc ="PReP Host Bridge - Motorola Raven" ; dc->vmsd = &vmstate_raven; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ +/* +* PCI-facing part of the host bridge, not usable without the +* host-facing part, which can't be device_add'ed, yet. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo raven_info = {
hw/pci-host/q35.c +5 -0
@@ -420,6 +420,11 @@ static void mch_class_init(ObjectClass *klass, void *data) k->device_id =PCI_DEVICE_ID_INTEL_Q35_MCH ; k->revision =MCH_HOST_BRIDGE_REVISION_DEFAULT ; k->class_id =PCI_CLASS_BRIDGE_HOST ; +/* +* PCI-facing part of the host bridge, not usable without the +* host-facing part, which can't be device_add'ed, yet. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo mch_info = {
hw/pci-host/uninorth.c +24 -0
@@ -351,12 +351,18 @@ static int unin_internal_pci_host_init(PCIDevice *d)static void unin_main_pci_host_class_init (ObjectClass *klass,void *data) {PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); +DeviceClass *dc =DEVICE_CLASS (klass); k->init = unin_main_pci_host_init; k->vendor_id =PCI_VENDOR_ID_APPLE ; k->device_id =PCI_DEVICE_ID_APPLE_UNI_N_PCI ; k->revision =0x00 ; k->class_id =PCI_CLASS_BRIDGE_HOST ; +/* +* PCI-facing part of the host bridge, not usable without the +* host-facing part, which can't be device_add'ed, yet. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo unin_main_pci_host_info = {
@@ -369,12 +375,18 @@ static const TypeInfo unin_main_pci_host_info = {static void u3_agp_pci_host_class_init (ObjectClass *klass,void *data) {PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); +DeviceClass *dc =DEVICE_CLASS (klass); k->init = u3_agp_pci_host_init; k->vendor_id =PCI_VENDOR_ID_APPLE ; k->device_id =PCI_DEVICE_ID_APPLE_U3_AGP ; k->revision =0x00 ; k->class_id =PCI_CLASS_BRIDGE_HOST ; +/* +* PCI-facing part of the host bridge, not usable without the +* host-facing part, which can't be device_add'ed, yet. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo u3_agp_pci_host_info = {
@@ -387,12 +399,18 @@ static const TypeInfo u3_agp_pci_host_info = {static void unin_agp_pci_host_class_init (ObjectClass *klass,void *data) {PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); +DeviceClass *dc =DEVICE_CLASS (klass); k->init = unin_agp_pci_host_init; k->vendor_id =PCI_VENDOR_ID_APPLE ; k->device_id =PCI_DEVICE_ID_APPLE_UNI_N_AGP ; k->revision =0x00 ; k->class_id =PCI_CLASS_BRIDGE_HOST ; +/* +* PCI-facing part of the host bridge, not usable without the +* host-facing part, which can't be device_add'ed, yet. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo unin_agp_pci_host_info = {
@@ -405,12 +423,18 @@ static const TypeInfo unin_agp_pci_host_info = {static void unin_internal_pci_host_class_init (ObjectClass *klass,void *data) {PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); +DeviceClass *dc =DEVICE_CLASS (klass); k->init = unin_internal_pci_host_init; k->vendor_id =PCI_VENDOR_ID_APPLE ; k->device_id =PCI_DEVICE_ID_APPLE_UNI_N_I_PCI ; k->revision =0x00 ; k->class_id =PCI_CLASS_BRIDGE_HOST ; +/* +* PCI-facing part of the host bridge, not usable without the +* host-facing part, which can't be device_add'ed, yet. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo unin_internal_pci_host_info = {
hw/pci-host/versatile.c +6 -0
@@ -467,11 +467,17 @@ static int versatile_pci_host_init(PCIDevice *d)static void versatile_pci_host_class_init (ObjectClass *klass,void *data) {PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); +DeviceClass *dc =DEVICE_CLASS (klass); k->init = versatile_pci_host_init; k->vendor_id =PCI_VENDOR_ID_XILINX ; k->device_id =PCI_DEVICE_ID_XILINX_XC2VP30 ; k->class_id =PCI_CLASS_PROCESSOR_CO ; +/* +* PCI-facing part of the host bridge, not usable without the +* host-facing part, which can't be device_add'ed, yet. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo versatile_pci_host_info = {
hw/ppc/ppc4xx_pci.c +5 -0
@@ -380,6 +380,11 @@ static void ppc4xx_host_bridge_class_init(ObjectClass *klass, void *data) k->vendor_id =PCI_VENDOR_ID_IBM ; k->device_id =PCI_DEVICE_ID_IBM_440GX ; k->class_id =PCI_CLASS_BRIDGE_OTHER ; +/* +* PCI-facing part of the host bridge, not usable without the +* host-facing part, which can't be device_add'ed, yet. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo ppc4xx_host_bridge_info = {
hw/sh4/sh_pci.c +6 -0
@@ -162,10 +162,16 @@ static int sh_pci_host_init(PCIDevice *d)static void sh_pci_host_class_init (ObjectClass *klass,void *data) {PCIDeviceClass *k =PCI_DEVICE_CLASS (klass); +DeviceClass *dc =DEVICE_CLASS (klass); k->init = sh_pci_host_init; k->vendor_id =PCI_VENDOR_ID_HITACHI ; k->device_id =PCI_DEVICE_ID_HITACHI_SH7751R ; +/* +* PCI-facing part of the host bridge, not usable without the +* host-facing part, which can't be device_add'ed, yet. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo sh_pci_host_info = {
Signature · 1 line
1.8.1.4
PATCH v4 6/10 ich9: Document why cannot_instantiate_with_device_add_yet
In reply to [email protected]From: Markus Armbruster <[email protected]>
An ICH9 southbridge contains several PCI devices, some of them with multiple functions. We model each function as a separate qdev. Two of them need some special wiring set up in pc_q35_init() to work: the LPC controller at 00:1f.0, and the SMBus controller at 00:1f.3.
--- hw/i2c/smbus_ich9.c | 6 +++++- hw/isa/lpc_ich9.c | 7 +++++-- 2 files changed, 10 insertions(+), 3 deletions(-)
hw/i2c/smbus_ich9.c +5 -1
@@ -97,11 +97,15 @@ static void ich9_smb_class_init(ObjectClass *klass, void *data) k->device_id =PCI_DEVICE_ID_INTEL_ICH9_6 ; k->revision =ICH9_A2_SMB_REVISION ; k->class_id =PCI_CLASS_SERIAL_SMBUS ; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_ich9_smbus; dc->desc ="ICH9 SMBUS Bridge" ; k->init = ich9_smbus_initfn; k->config_write = ich9_smbus_write_config; +/* +* Reason: part of ICH9 southbridge, needs to be wired up by +* pc_q35_init() +*/ + dc->cannot_instantiate_with_device_add_yet = true; }i2c_bus *ich9_smb_init (PCIBus *bus,int devfn,uint32_t smb_io_base)
hw/isa/lpc_ich9.c +5 -2
@@ -644,14 +644,17 @@ static void ich9_lpc_class_init(ObjectClass *klass, void *data) dc->reset = ich9_lpc_reset; k->init = ich9_lpc_initfn; dc->vmsd = &vmstate_ich9_lpc; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ k->config_write = ich9_lpc_config_write; dc->desc ="ICH9 LPC bridge" ; k->vendor_id =PCI_VENDOR_ID_INTEL ; k->device_id =PCI_DEVICE_ID_INTEL_ICH9_8 ; k->revision =ICH9_A2_LPC_REVISION ; k->class_id =PCI_CLASS_BRIDGE_ISA ; - +/* +* Reason: part of ICH9 southbridge, needs to be wired up by +* pc_q35_init() +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo ich9_lpc_info = {
Signature · 1 line
1.8.1.4
PATCH v4 7/10 piix3 piix4: Clean up use of cannot_instantiate_with_device_add_yet
In reply to [email protected]From: Markus Armbruster <[email protected]>
A PIIX3/PIIX4 southbridge has multiple functions. We model each function as a separate qdev. Two of them need some special wiring set up in pc_init1() or mips_malta_init() to work: the ISA bridge at 01.0, and the SMBus controller at 01.3.
The IDE controller at 01.1 (piix3-ide, piix3-ide-xen, piix4-ide) has always had cannot_instantiate_with_device_add_yet set, but there is no obvious reason why device_add could not work for them. Drop it.
--- hw/acpi/piix4.c | 6 +++++- hw/ide/piix.c | 3 --- hw/isa/piix4.c | 6 +++++- hw/pci-host/piix.c | 12 ++++++++++-- 4 files changed, 20 insertions(+), 7 deletions(-)
hw/acpi/piix4.c +5 -1
@@ -544,9 +544,13 @@ static void piix4_pm_class_init(ObjectClass *klass, void *data) k->revision =0x03 ; k->class_id =PCI_CLASS_BRIDGE_OTHER ; dc->desc ="PM" ; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_acpi; dc->props = piix4_pm_properties; +/* +* Reason: part of PIIX4 southbridge, needs to be wired up, +* e.g. by mips_malta_init() +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo piix4_pm_info = {
hw/ide/piix.c +0 -3
@@ -248,7 +248,6 @@ static void piix3_ide_class_init(ObjectClass *klass, void *data) k->device_id =PCI_DEVICE_ID_INTEL_82371SB_1 ; k->class_id =PCI_CLASS_STORAGE_IDE ;set_bit (DEVICE_CATEGORY_STORAGE , dc->categories); - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo piix3_ide_info = {
@@ -267,7 +266,6 @@ static void piix3_ide_xen_class_init(ObjectClass *klass, void *data) k->device_id =PCI_DEVICE_ID_INTEL_82371SB_1 ; k->class_id =PCI_CLASS_STORAGE_IDE ;set_bit (DEVICE_CATEGORY_STORAGE , dc->categories); - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->unplug = pci_piix3_xen_ide_unplug; }
@@ -289,7 +287,6 @@ static void piix4_ide_class_init(ObjectClass *klass, void *data) k->device_id =PCI_DEVICE_ID_INTEL_82371AB ; k->class_id =PCI_CLASS_STORAGE_IDE ;set_bit (DEVICE_CATEGORY_STORAGE , dc->categories); - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo piix4_ide_info = {
hw/isa/piix4.c +5 -1
@@ -113,8 +113,12 @@ static void piix4_class_init(ObjectClass *klass, void *data) k->device_id =PCI_DEVICE_ID_INTEL_82371AB_0 ; k->class_id =PCI_CLASS_BRIDGE_ISA ; dc->desc ="ISA bridge" ; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_piix4; +/* +* Reason: part of PIIX4 southbridge, needs to be wired up, +* e.g. by mips_malta_init() +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo piix4_info = {
hw/pci-host/piix.c +10 -2
@@ -653,7 +653,6 @@ static void piix3_class_init(ObjectClass *klass, void *data) dc->desc ="ISA bridge" ; dc->vmsd = &vmstate_piix3; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ k->no_hotplug =1 ; k->init = piix3_initfn; k->config_write = piix3_write_config;
@@ -661,6 +660,11 @@ static void piix3_class_init(ObjectClass *klass, void *data)/* 82371SB PIIX3 PCI-to-ISA bridge (Step A1) */ k->device_id =PCI_DEVICE_ID_INTEL_82371SB_0 ; k->class_id =PCI_CLASS_BRIDGE_ISA ; +/* +* Reason: part of PIIX3 southbridge, needs to be wired up by +* pc_piix.c's pc_init1() +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo piix3_info = {
@@ -677,7 +681,6 @@ static void piix3_xen_class_init(ObjectClass *klass, void *data) dc->desc ="ISA bridge" ; dc->vmsd = &vmstate_piix3; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ k->no_hotplug =1 ; k->init = piix3_initfn; k->config_write = piix3_write_config_xen;
@@ -685,6 +688,11 @@ static void piix3_xen_class_init(ObjectClass *klass, void *data)/* 82371SB PIIX3 PCI-to-ISA bridge (Step A1) */ k->device_id =PCI_DEVICE_ID_INTEL_82371SB_0 ; k->class_id =PCI_CLASS_BRIDGE_ISA ; +/* +* Reason: part of PIIX3 southbridge, needs to be wired up by +* pc_piix.c's pc_init1() +*/ + dc->cannot_instantiate_with_device_add_yet = true; };static const TypeInfo piix3_xen_info = {
Signature · 1 line
1.8.1.4
PATCH v4 8/10 vt82c686: Clean up use of cannot_instantiate_with_device_add_yet
In reply to [email protected]From: Markus Armbruster <[email protected]>
A VT82C686B southbridge has multiple functions. We model each function as a separate qdev. One of them need some special wiring set up in mips_fulong2e_init() to work: the ISA bridge at 05.0.
The IDE controller at 05.1 (via-ide) has always had cannot_instantiate_with_device_add_yet set, but there is no obvious reason why device_add could not work for them. Drop it.
--- hw/ide/via.c | 1 - hw/isa/vt82c686.c | 6 +++++- 2 files changed, 5 insertions(+), 2 deletions(-)
hw/ide/via.c +0 -1
@@ -225,7 +225,6 @@ static void via_ide_class_init(ObjectClass *klass, void *data) k->revision =0x06 ; k->class_id =PCI_CLASS_STORAGE_IDE ;set_bit (DEVICE_CATEGORY_STORAGE , dc->categories); - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ }static const TypeInfo via_ide_info = {
hw/isa/vt82c686.c +5 -1
@@ -480,8 +480,12 @@ static void via_class_init(ObjectClass *klass, void *data) k->class_id =PCI_CLASS_BRIDGE_ISA ; k->revision =0x40 ; dc->desc ="ISA bridge" ; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_via; +/* +* Reason: part of VIA VT82C686 southbridge, needs to be wired up, +* e.g. by mips_fulong2e_init() +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo via_info = {
Signature · 1 line
1.8.1.4
PATCH v4 9/10 isa: Clean up use of cannot_instantiate_with_device_add_yet
In reply to [email protected]From: Markus Armbruster <[email protected]>
Drop it when there's no obvious reason why device_add could not work. Else keep and document why.
* isa-fdc: drop
* i8042: drop, even though its I/O base is hardcoded (because you could conceivably still add one to a board that has none), and even though PC board code wires up the A20 line (because that wiring is optional)
* port92: keep because it needs additional wiring by port92_init()
* mc146818rtc: keep because it needs to be wired up by rtc_init()
* m48t59_isa: keep because needs to be wired up by m48t59_init_isa()
* isa-pit, kvm-pit: keep (in their abstract base pic-common) because the PIT needs additional wiring by board code, depending on HPET presence
* pcspk: keep because of pointer property pit, and because realize sets global pcspk_state
* vmmouse: keep because of pointer property ps2_mouse
* vmport: keep because realize sets global port_state
* isa-i8259, kvm-i8259: keep (in their abstract base pic-common), because the PICs' IRQ input lines are set up by board code, and the wiring of the slave to the master is hard-coded in device model code
--- hw/audio/pcspk.c | 3 ++- hw/block/fdc.c | 1 - hw/i386/pc.c | 7 ++++++- hw/input/pckbd.c | 1 - hw/input/vmmouse.c | 3 ++- hw/intc/i8259_common.c | 8 +++++++- hw/misc/vmport.c | 3 ++- hw/timer/i8254_common.c | 7 ++++++- hw/timer/m48t59.c | 3 ++- hw/timer/mc146818rtc.c | 3 ++- 10 files changed, 29 insertions(+), 10 deletions(-)
hw/audio/pcspk.c +2 -1
@@ -192,8 +192,9 @@ static void pcspk_class_initfn(ObjectClass *klass, void *data) dc->realize = pcspk_realizefn;set_bit (DEVICE_CATEGORY_SOUND , dc->categories); - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->props = pcspk_properties; +/* Reason: pointer property "pit", realize sets global pcspk_state */ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo pcspk_info = {
hw/block/fdc.c +0 -1
@@ -2234,7 +2234,6 @@ static void isabus_fdc_class_init(ObjectClass *klass, void *data) dc->realize = isabus_fdc_realize; dc->fw_name ="fdc" ; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->reset = fdctrl_external_reset_isa; dc->vmsd = &vmstate_isa_fdc; dc->props = isa_fdc_properties;
hw/i386/pc.c +6 -1
@@ -547,10 +547,15 @@ static void port92_class_initfn(ObjectClass *klass, void *data) {DeviceClass *dc =DEVICE_CLASS (klass); - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->realize = port92_realizefn; dc->reset = port92_reset; dc->vmsd = &vmstate_port92_isa; +/* +* Reason: unlike ordinary ISA devices, this one needs additional +* wiring: its A20 output line needs to be wired up by +* port92_init(). +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo port92_info = {
hw/input/pckbd.c +0 -1
@@ -522,7 +522,6 @@ static void i8042_class_initfn(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = i8042_realizefn; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_kbd_isa; }
hw/input/vmmouse.c +2 -1
@@ -282,10 +282,11 @@ static void vmmouse_class_initfn(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = vmmouse_realizefn; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->reset = vmmouse_reset; dc->vmsd = &vmstate_vmmouse; dc->props = vmmouse_properties; +/* Reason: pointer property "ps2_mouse" */ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo vmmouse_info = {
hw/intc/i8259_common.c +7 -1
@@ -135,9 +135,15 @@ static void pic_common_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->vmsd = &vmstate_pic_common; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->props = pic_properties_common; dc->realize = pic_common_realize; +/* +* Reason: unlike ordinary ISA devices, the PICs need additional +* wiring: its IRQ input lines are set up by board code, and the +* wiring of the slave to the master is hard-coded in device model +* code. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo pic_common_type = {
hw/misc/vmport.c +2 -1
@@ -162,7 +162,8 @@ static void vmport_class_initfn(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = vmport_realizefn; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ +/* Reason: realize sets global port_state */ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo vmport_info = {
hw/timer/i8254_common.c +6 -1
@@ -282,7 +282,12 @@ static void pit_common_class_init(ObjectClass *klass, void *data) dc->realize = pit_common_realize; dc->vmsd = &vmstate_pit_common; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ +/* +* Reason: unlike ordinary ISA devices, the PIT may need to be +* wired to the HPET, and because of that, some wiring is always +* done by board code. +*/ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo pit_common_type = {
hw/timer/m48t59.c +2 -1
@@ -750,9 +750,10 @@ static void m48t59_isa_class_init(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = m48t59_isa_realize; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->reset = m48t59_reset_isa; dc->props = m48t59_isa_properties; +/* Reason: needs to be wired up by m48t59_init_isa() */ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo m48t59_isa_info = {
hw/timer/mc146818rtc.c +2 -1
@@ -899,9 +899,10 @@ static void rtc_class_initfn(ObjectClass *klass, void *data)DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = rtc_realizefn; - dc->cannot_instantiate_with_device_add_yet = true;/* FIXME explain why */ dc->vmsd = &vmstate_rtc; dc->props = mc146818rtc_properties; +/* Reason: needs to be wired up by rtc_init() */ + dc->cannot_instantiate_with_device_add_yet = true; }static const TypeInfo mc146818rtc_info = {
Signature · 1 line
1.8.1.4
PATCH v4 10/10 qdev: Do not let the user try to device_add when it cannot work
In reply to [email protected]From: Markus Armbruster <[email protected]>
Such devices have always been unavailable and omitted from the list of available devices shown by device_add help. Until commit 18b6dad silently broke the former, setting up nasty traps for unwary users, like this one:
$ qemu-system-x86_64 -nodefaults -monitor stdio -display none
QEMU 1.6.50 monitor - type 'help' for more information
(qemu) device_add apic
Segmentation fault (core dumped)I call that a regression. Fix it.
--- qdev-monitor.c | 5 +++++ 1 file changed, 5 insertions(+)
qdev-monitor.c +5 -0
@@ -490,6 +490,11 @@ DeviceState *qdev_device_add(QemuOpts *opts) } dc =DEVICE_CLASS (oc); +if (dc->cannot_instantiate_with_device_add_yet) { +qerror_report (QERR_INVALID_PARAMETER_VALUE ,"driver" , +"pluggable device type" ); +return NULL ; + }/* find bus */ path =qemu_opt_get (opts,"bus" );
Signature · 1 line
1.8.1.4
Re: [Qemu-devel] [PATCH v4 10/10] qdev: Do not let the user try to device_add when it cannot work
Am 28.11.2013 17:27, schrieb [email protected]:
Quoted 25 lines
From: Markus Armbruster <[email protected]>
Such devices have always been unavailable and omitted from the list of available devices shown by
device_addhelp. Until commit 18b6dad silently broke the former, setting up nasty traps for unwary users, like this one:$ qemu-system-x86_64 -nodefaults -monitor stdio -display none QEMU 1.6.50 monitor - type 'help' for more information (qemu) device_add apic Segmentation fault (core dumped)I call that a regression. Fix it.
Signed-off-by Markus Armbruster <[email protected]>Reviewed-by Marcel Apfelbaum <[email protected]>--- qdev-monitor.c | 5 +++++ 1 file changed, 5 insertions(+)qdev-monitor.c +0
-0
qdev-monitor.c DeviceState *qdev_device_add(QemuOpts *opts) · line 495
Quoted 6 lines
qdev-monitor.c +3
-0@@ -490,6 +490,11 @@ DeviceState *qdev_device_add(QemuOpts *opts) } dc =DEVICE_CLASS (oc); +if (dc->cannot_instantiate_with_device_add_yet) { +qerror_report (QERR_INVALID_PARAMETER_VALUE ,"driver" , +"pluggable device type" );
Is this a restoration of a previous state? Because I thought we shouldn't use QERR_* any more for new code...
Andreas
Quoted 6 lines
qdev-monitor.c +2
-0+return NULL ; + }/* find bus */ path =qemu_opt_get (opts,"bus" );
Signature · 2 lines
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
Re: [Qemu-devel] [PATCH v4 10/10] qdev: Do not let the user try to device_add when it cannot work
Quoted 21 lines · Andreas Färber
Am 28.11.2013 17:27, schrieb [email protected]:
Quoted 20 lines
From: Markus Armbruster <[email protected]>
Such devices have always been unavailable and omitted from the list of available devices shown by
device_addhelp. Until commit 18b6dad silently broke the former, setting up nasty traps for unwary users, like this one:$ qemu-system-x86_64 -nodefaults -monitor stdio -display none QEMU 1.6.50 monitor - type 'help' for more information (qemu) device_add apic Segmentation fault (core dumped)I call that a regression. Fix it.
Signed-off-by Markus Armbruster <[email protected]>Reviewed-by Marcel Apfelbaum <[email protected]>--- qdev-monitor.c | 5 +++++ 1 file changed, 5 insertions(+)
Quoted 5 lines
qdev-monitor.c DeviceState *qdev_device_add(QemuOpts *opts)
Quoted 5 lines
qdev-monitor.c +0
-0@@ -490,6 +490,11 @@ DeviceState *qdev_device_add(QemuOpts *opts)
if (!oc) {
qerror_report(QERR_INVALID_PARAMETER_VALUE, "driver", "device type");
return NULL;
}
if (object_class_is_abstract(oc)) {
qerror_report(QERR_INVALID_PARAMETER_VALUE, "driver",
"non-abstract device type");
return NULL;Quoted 9 lines
qdev-monitor.c DeviceState *qdev_device_add(QemuOpts *opts) · line 495
Quoted 6 lines
qdev-monitor.c +3
-0} dc =DEVICE_CLASS (oc); +if (dc->cannot_instantiate_with_device_add_yet) { +qerror_report (QERR_INVALID_PARAMETER_VALUE ,"driver" , +"pluggable device type" );Is this a restoration of a previous state? Because I thought we shouldn't use QERR_* any more for new code...
See the additional context: I'm sticking to what the existing nearby code does.
Quoted 6 lines
Quoted 6 lines
qdev-monitor.c +2
-0+return NULL ; + }/* find bus */ path =qemu_opt_get (opts,"bus" );
Am 28.11.2013 17:26, schrieb [email protected]:
Quoted 11 lines
Markus Armbruster (10):
qdev: Replaceno_userbycannot_instantiate_with_device_add_yet
sysbus: Setcannot_instantiate_with_device_add_yet
cpu: Document whycannot_instantiate_with_device_add_yet
apic: Document whycannot_instantiate_with_device_add_yet
pci-host: Consistently setcannot_instantiate_with_device_add_yet
ich9: Document whycannot_instantiate_with_device_add_yetpiix3 piix4: Clean up use ofcannot_instantiate_with_device_add_yet
vt82c686: Clean up use ofcannot_instantiate_with_device_add_yet
isa: Clean up use ofcannot_instantiate_with_device_add_yet
qdev: Do not let the user try todevice_addwhen it cannot work
I've applied all except for the ISA patch, which doesn't feature a Reviewed-by yet.
https://github.com/afaerber/qemu-cpu/commits/qom-next
I'd appreciate if some previous reviewer can comment on whether any issues have been resolved satisfactorily.
Thanks,
Andreas
Signature · 2 lines
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
Quoted 13 lines · Andreas Färber
Am 28.11.2013 17:26, schrieb [email protected]:
Quoted 11 lines
Markus Armbruster (10):
qdev: Replaceno_userbycannot_instantiate_with_device_add_yet
sysbus: Setcannot_instantiate_with_device_add_yet
cpu: Document whycannot_instantiate_with_device_add_yet
apic: Document whycannot_instantiate_with_device_add_yet
pci-host: Consistently setcannot_instantiate_with_device_add_yet
ich9: Document whycannot_instantiate_with_device_add_yetpiix3 piix4: Clean up use ofcannot_instantiate_with_device_add_yet
vt82c686: Clean up use ofcannot_instantiate_with_device_add_yet
isa: Clean up use ofcannot_instantiate_with_device_add_yet
qdev: Do not let the user try todevice_addwhen it cannot work
Quoted 7 lines
I've applied all except for the ISA patch, which doesn't feature a Reviewed-by yet.
https://github.com/afaerber/qemu-cpu/commits/qom-next
I'd appreciate if some previous reviewer can comment on whether any issues have been resolved satisfactorily.
Paolo answered a question I posted along with my RFC series, Peter pointed out two wires I missed in v1 (fixed in v2), Marcel examined v3, but didn't feel familiar enough with the code to risk a formal Reviewed-by. I asked Anthony to review a couple of times, and he said he intended to.
However, consider the timeline:
Oct 10 RFC
* you, Paolo, Kevin and Anthony commented
Oct 17 v1
Oct 29 v2: address Peter Maydell's review
* Some commit messages improved
* Use QOM cast macros instead of .parent_class [PATCH 05]
* keep cannot_instantiate_with_device_add_yet for port92, isa-pit, kvm-pit, m48t59_isa, mc146818rtc [PATCH 09]
Oct 30 v3: address Eric Blake's and Marcel Apfelbaum's review
* Clean up a harmless editing accident in PATCH 07
* Simplify PATCH 10 slightly
Nov 28 v4: straightforward rebase (only PATCH 10/10 conflicts)
It's been more than six weeks since the last review comment. I doubt more waiting (and more rebasing) will be productive.
Quoted 13 lines · Andreas Färber
Am 28.11.2013 17:26, schrieb [email protected]:
Quoted 11 lines
Markus Armbruster (10):
qdev: Replaceno_userbycannot_instantiate_with_device_add_yet
sysbus: Setcannot_instantiate_with_device_add_yet
cpu: Document whycannot_instantiate_with_device_add_yet
apic: Document whycannot_instantiate_with_device_add_yet
pci-host: Consistently setcannot_instantiate_with_device_add_yet
ich9: Document whycannot_instantiate_with_device_add_yetpiix3 piix4: Clean up use ofcannot_instantiate_with_device_add_yet
vt82c686: Clean up use ofcannot_instantiate_with_device_add_yet
isa: Clean up use ofcannot_instantiate_with_device_add_yet
qdev: Do not let the user try todevice_addwhen it cannot work
Quoted 7 lines
I've applied all except for the ISA patch, which doesn't feature a Reviewed-by yet.
https://github.com/afaerber/qemu-cpu/commits/qom-next
I'd appreciate if some previous reviewer can comment on whether any issues have been resolved satisfactorily.
There are no issues with the patches reviewed by me. Thanks,
Marcel
Quoted 4 lines
Thanks,
Andreas
Andreas Färber
AppliedAm 16.12.2013 09:21, schrieb Marcel Apfelbaum:
Quoted 14 lines · Andreas Färber
Quoted 13 lines
Am 28.11.2013 17:26, schrieb [email protected]:
Quoted 11 lines
Markus Armbruster (10):
qdev: Replaceno_userbycannot_instantiate_with_device_add_yet
sysbus: Setcannot_instantiate_with_device_add_yet
cpu: Document whycannot_instantiate_with_device_add_yet
apic: Document whycannot_instantiate_with_device_add_yet
pci-host: Consistently setcannot_instantiate_with_device_add_yet
ich9: Document whycannot_instantiate_with_device_add_yetpiix3 piix4: Clean up use ofcannot_instantiate_with_device_add_yet
vt82c686: Clean up use ofcannot_instantiate_with_device_add_yet
isa: Clean up use ofcannot_instantiate_with_device_add_yet
qdev: Do not let the user try todevice_addwhen it cannot work
Quoted 8 lines
Quoted 7 lines
I've applied all except for the ISA patch, which doesn't feature a Reviewed-by yet.
https://github.com/afaerber/qemu-cpu/commits/qom-next
I'd appreciate if some previous reviewer can comment on whether any issues have been resolved satisfactorily.
There are no issues with the patches reviewed by me.
I was asking about 09/10 which no one had. ;)
Applied to qom-next now.
Andreas
Signature · 2 lines
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg