configs: add Freescale i.MX 6SoloLite EVK support
PATCH 1/1 configs: add Freescale i.MX 6SoloLite EVK support
i.MX6 SoloLite EVK is Freescale's evaluation board based on the i.MX6 SoloLite applications processor.
This defconfig is based off Freescale "official" git repo on git.freescale.com and SW release 3.0.35_4.1.0.
--- configs/freescale_imx6sololiteevk_defconfig | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 configs/freescale_imx6sololiteevk_defconfig
configs/freescale_imx6sololiteevk_defconfig new file +15 -0
@@ -0,0 +1,15 @@ +BR2_arm=y +BR2_cortex_a9=y +BR2_ROOTFS_DEVICE_CREATION_STATIC=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git" +BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="rel_imx_3.0.35_4.1.0" +BR2_LINUX_KERNEL_DEFCONFIG="imx6s" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="mx6sl_evk" +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.freescale.com/imx/uboot-imx.git" +BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="rel_imx_3.0.35_4.1.0"
Signature · 1 line
1.7.10.4
PATCH 1/1 configs: add Freescale SABRE-SD board support
SABRE Board for Smart Devices (SABRE-SD) is Freescale's evaluation board based on the i.MX 6Quad ARM Cortex-A9 applications processor.
This defconfig is based off Freescale "official" git repo on git.freescale.com and SW release 3.0.35_4.1.0.
--- configs/freescale_imx6sabresd_defconfig | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 configs/freescale_imx6sabresd_defconfig
configs/freescale_imx6sabresd_defconfig new file +15 -0
@@ -0,0 +1,15 @@ +BR2_arm=y +BR2_cortex_a9=y +BR2_ROOTFS_DEVICE_CREATION_STATIC=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git" +BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="rel_imx_3.0.35_4.1.0" +BR2_LINUX_KERNEL_DEFCONFIG="imx6" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="mx6q_sabresd" +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://git.freescale.com/imx/uboot-imx.git" +BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="rel_imx_3.0.35_4.1.0"
Signature · 1 line
1.7.10.4
PATCH 1/1 configs: add Freescale i.MX 6SoloLite EVK support
In reply to Gilles TalisQuoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Gilles" == Gilles Talis <[email protected]> writes:
Gilles> i.MX6 SoloLite EVK is Freescale's evaluation board based on Gilles> the i.MX6 SoloLite applications processor.
Gilles> This defconfig is based off Freescale "official" git repo on git.freescale.com Gilles> and SW release 3.0.35_4.1.0.
Gilles> Signed-off-by: Gilles Talis <[email protected]> Gilles> ---
Gilles> configs/freescale_imx6sololiteevk_defconfig | 15 +++++++++++++++
Gilles> 1 file changed, 15 insertions(+)
Gilles> create mode 100644 configs/freescale_imx6sololiteevk_defconfig
Gilles> diff --git a/configs/freescale_imx6sololiteevk_defconfig b/configs/freescale_imx6sololiteevk_defconfig Gilles> new file mode 100644
Gilles> index 0000000..7ed6e6c
Gilles> --- /dev/null
Gilles> +++ b/configs/freescale_imx6sololiteevk_defconfig
Gilles> @@ -0,0 +1,15 @@
Gilles> +BR2_arm=y
Gilles> +BR2_cortex_a9=y
Gilles> +BR2_ROOTFS_DEVICE_CREATION_STATIC=y
Why do you want static device nodes?
Signature · 1 line
Bye, Peter Korsgaard
PATCH 1/1 configs: add Freescale i.MX 6SoloLite EVK support
Peter,
Quoted 3 lines
Gilles> +BR2_ROOTFS_DEVICE_CREATION_STATIC=y
Why do you want static device nodes?
Kernel defconfig does not support DEVTMPFS. I did not want to change that. Is it a problem?
PATCH 1/1 configs: add Freescale i.MX 6SoloLite EVK support
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Gilles" == Gilles Talis <[email protected]> writes:
Gilles> Peter,
Gilles> +BR2_ROOTFS_DEVICE_CREATION_STATIC=y
Quoted 2 lines
Quoted 2 lines
Why do you want static device nodes?
Gilles> Kernel defconfig does not support DEVTMPFS. I did not want to change Gilles> that. Is it a problem?
It's not really a problem, no - Just quite uncommon. Do notice that Buildroot automatically enables devtmpfs support in the kernel if needed, so it should all just work.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 1/1 configs: add Freescale i.MX 6SoloLite EVK support
Hi Peter,
Quoted 3 lines
It's not really a problem, no - Just quite uncommon. Do notice that Buildroot automatically enables devtmpfs support in the kernel if needed, so it should all just work.
Does it? I was not aware of that. It did not seem to work for me, hence the reason why I had to force static device nodes. Let me give it another try and see how it goes.
Thanks
Gilles.
PATCH 1/1 configs: add Freescale i.MX 6SoloLite EVK support
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Gilles" == Gilles Talis <[email protected]> writes:
Gilles> Hi Peter,
Quoted 3 lines
Quoted 3 lines
It's not really a problem, no - Just quite uncommon. Do notice that Buildroot automatically enables devtmpfs support in the kernel if needed, so it should all just work.
Gilles> Does it? I was not aware of that. It did not seem to work for me, Gilles> hence the reason why I had to force static device nodes. Let me give Gilles> it another try and see how it goes.
As long as you build the kernel through buildroot it should:
git grep -B1 DEVTMPFS linux/linux.mk linux/linux.mk- $(if $(BR2_ROOTFS_DEVICE_CREATION_STATIC),,
linux/linux.mk: $(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS,$(@D)/.config) linux/linux.mk: $(call KCONFIG_ENABLE_OPT,CONFIG_DEVTMPFS_MOUNT,$(@D)/.c
Signature · 1 line
Bye, Peter Korsgaard