Skip to contentSkip to conversation

CVS: alsa-kernel/pci/emu10k1 emu10k1_main.c,1.12,1.13

alsa-cvslog James Courtier-Dutton 4 participants 26 messages Apr 11, 2002 – Apr 17, 2002 1 message not in the archive Kbuild

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 23 lines · Takashi Iwai

Update of /cvsroot/alsa/alsa-kernel/pci/emu10k1
In directory usw-pr-cvs1:/tmp/cvs-serv9192

Modified Files:

	emu10k1_main.c 

Log Message:
fixed default mask values
(these change won't affect the actual behavior, though)

Index: emu10k1_main.c
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c,v retrieving revision 1.12
retrieving revision 1.13
diff -u -r1.12 -r1.13

emu10k1_main.c +0 -0
@@ -630,9 +630,9 @@
 

emu10k1_main.c line 638

Quoted 10 lines
emu10k1_main.c +2 -2
 	emu->fx8010.fxbus_mask = 0x303f;
 	if (extin_mask == 0)
-		extin_mask = 0x1fcf;
+		extin_mask = 0x3fcf;
 	if (extout_mask == 0)
-		extout_mask = 0x3fff;
+		extout_mask = 0x1fff;
 	emu->fx8010.extin_mask = extin_mask;
 	emu->fx8010.extout_mask = extout_mask;
 

This seems to have fixed AC3 Passthru mode on SB Live (rev 7) cards.

Just so you know, all SB Live cards worked before for AC3 Passthru except the rev 7 cards.

I just got a report on the xine-user list about it.
Ok, so you did not know you were fixing it, but well done anyway!!!! ;-)

Cheers
James

#2 lore raw

At Thu, 11 Apr 2002 15:42:23 +0100,

Quoted 39 lines · James Courtier-Dutton

[1 <text/plain; us-ascii (7bit)>]

Quoted 23 lines · Takashi Iwai

Update of /cvsroot/alsa/alsa-kernel/pci/emu10k1
In directory usw-pr-cvs1:/tmp/cvs-serv9192

Modified Files:

	emu10k1_main.c 

Log Message:
fixed default mask values
(these change won't affect the actual behavior, though)

Index: emu10k1_main.c
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/pci/emu10k1/emu10k1_main.c,v retrieving revision 1.12
retrieving revision 1.13
diff -u -r1.12 -r1.13

emu10k1_main.c +0 -0
@@ -630,9 +630,9 @@
 

emu10k1_main.c line 638

Quoted 10 lines
emu10k1_main.c +2 -2
 	emu->fx8010.fxbus_mask = 0x303f;
 	if (extin_mask == 0)
-		extin_mask = 0x1fcf;
+		extin_mask = 0x3fcf;
 	if (extout_mask == 0)
-		extout_mask = 0x3fff;
+		extout_mask = 0x1fff;
 	emu->fx8010.extin_mask = extin_mask;
 	emu->fx8010.extout_mask = extout_mask;
 

This seems to have fixed AC3 Passthru mode on SB Live (rev 7) cards.

Quoted 5 lines

Just so you know, all SB Live cards worked before for AC3 Passthru except the rev 7 cards.

I just got a report on the xine-user list about it.
Ok, so you did not know you were fixing it, but well done anyway!!!! ;-)

err, frankly speaking, i still don't figure out why with this change the pass-through works. i'm glad to to hear a good news, anyway ;)

Takashi

#3 lore raw

Hi Takashi!

Quoted 14 lines · Takashi Iwai

At Thu, 11 Apr 2002 15:42:23 +0100,

Quoted 12 lines · James Courtier-Dutton

[1 <text/plain; us-ascii (7bit)>]

Quoted 8 lines · Takashi Iwai

Update of /cvsroot/alsa/alsa-kernel/pci/emu10k1
In directory usw-pr-cvs1:/tmp/cvs-serv9192

Modified Files:

	emu10k1_main.c 

Log Message:
fixed default mask values
(these change won't affect the actual behavior, though)

[snip]

Quoted 7 lines
Quoted 5 lines

This seems to have fixed AC3 Passthru mode on SB Live (rev 7) cards. Just so you know, all SB Live cards worked before for AC3 Passthru except the rev 7 cards.
I just got a report on the xine-user list about it.
Ok, so you did not know you were fixing it, but well done anyway!!!! ;-)

err, frankly speaking, i still don't figure out why with this change the pass-through works. i'm glad to to hear a good news, anyway ;)

Just wanted to let you know that it wasn't the changes in emu10k1_main.c, but the changes in emumixer.c that made my (I was the one reporting it on the xine ML) rev07 card working.

Perhaps this helps
Regards
Markus

#4 lore raw
Quoted 25 lines · Markus Plail

Hi Takashi!

Quoted 14 lines · Takashi Iwai

At Thu, 11 Apr 2002 15:42:23 +0100,

Quoted 12 lines · James Courtier-Dutton

[1 <text/plain; us-ascii (7bit)>]

Quoted 8 lines · Takashi Iwai

Update of /cvsroot/alsa/alsa-kernel/pci/emu10k1
In directory usw-pr-cvs1:/tmp/cvs-serv9192

Modified Files:

	emu10k1_main.c 

Log Message:
fixed default mask values
(these change won't affect the actual behavior, though)

[snip]

Quoted 5 lines
Quoted 5 lines

This seems to have fixed AC3 Passthru mode on SB Live (rev 7) cards. Just so you know, all SB Live cards worked before for AC3 Passthru except the rev 7 cards.
I just got a report on the xine-user list about it.
Ok, so you did not know you were fixing it, but well done anyway!!!! ;-)

Quoted 6 lines
Quoted 2 lines

err, frankly speaking, i still don't figure out why with this change the pass-through works. i'm glad to to hear a good news, anyway ;)

Just wanted to let you know that it wasn't the changes in emu10k1_main.c, but the changes in emumixer.c that made my (I was the one reporting it on the xine ML) rev07 card working.

The joke is, that this behaviour is caused by a mistake. Here is the right patch against current CVS:

Index: emumixer.c
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/pci/emu10k1/emumixer.c,v retrieving revision 1.9

emumixer.c 16 Apr 2002 07:10:59 -0000 renamed from emumixer.c 8 Apr 2002 12:21:45 -0000 1.9 +1 -1
diff -u -r1.9 emumixer.c
@@ -369,7 +369,7 @@
        int change;
 
        spin_lock_irqsave(&emu->reg_lock, flags);
-       if (emu->audigy) {
+       if (!emu->audigy) {
                reg = inl(emu->port + HCFG);
                val = ucontrol->value.integer.value[0] & 1 ? 0 : HCFG_GPOUT0;
                change = (reg & HCFG_GPOUT0) != val;

At least, we know that for rev07 cards we shouldn't modify GPOUT0. These cards have separated the digital output or shared with an analog output?

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com

#5 lore raw

At Tue, 16 Apr 2002 09:15:10 +0200 (CEST),

Quoted 31 lines · Jaroslav
Quoted 28 lines · Markus Plail

Hi Takashi!

Quoted 14 lines · Takashi Iwai

At Thu, 11 Apr 2002 15:42:23 +0100,

Quoted 12 lines · James Courtier-Dutton

[1 <text/plain; us-ascii (7bit)>]

Quoted 8 lines · Takashi Iwai

Update of /cvsroot/alsa/alsa-kernel/pci/emu10k1
In directory usw-pr-cvs1:/tmp/cvs-serv9192

Modified Files:

	emu10k1_main.c 

Log Message:
fixed default mask values
(these change won't affect the actual behavior, though)

[snip]

Quoted 7 lines
Quoted 5 lines

This seems to have fixed AC3 Passthru mode on SB Live (rev 7) cards. Just so you know, all SB Live cards worked before for AC3 Passthru except the rev 7 cards.
I just got a report on the xine-user list about it.
Ok, so you did not know you were fixing it, but well done anyway!!!! ;-)

err, frankly speaking, i still don't figure out why with this change the pass-through works. i'm glad to to hear a good news, anyway ;)

Quoted 6 lines
Quoted 3 lines

Just wanted to let you know that it wasn't the changes in emu10k1_main.c, but the changes in emumixer.c that made my (I was the one reporting it on the xine ML) rev07 card working.

The joke is, that this behaviour is caused by a mistake. Here is the right patch against current CVS:

wow :)

Quoted 2 lines

At least, we know that for rev07 cards we shouldn't modify GPOUT0. These cards have separated the digital output or shared with an analog output?

Markus, could you try the latest cvs version, which fixes the "real" behavior, whether digital out works?
if it doesn't work again, then definitely GPOUT0 is the spot.

looking at OSS source codes, i found GPOUT0 is necessary only for 5.1 cards (and seems for Audigy too - i need to fix again).

so i'm not sure whether we can determine it from revision number.

Takashi

#6 lore raw

Hi Takashi!

Quoted 3 lines · Takashi Iwai

Markus, could you try the latest cvs version, which fixes the "real" behavior, whether digital out works? if it doesn't work again, then definitely GPOUT0 is the spot.

It doesn't work with latest CVS.

Quoted 3 lines

looking at OSS source codes, i found GPOUT0 is necessary only for 5.1 cards (and seems for Audigy too - i need to fix again).
so i'm not sure whether we can determine it from revision number.

Someone should test if the version which is doing fine here, is also OK on other revisions of the card, so 'we' could just leave the 'else statement' away. James has a rev06 to check it, for example.

Regards
Markus

#7 lore raw
Quoted 21 lines · Markus Plail

Hi Takashi!

Quoted 5 lines · Takashi Iwai

Markus, could you try the latest cvs version, which fixes the "real" behavior, whether digital out works? if it doesn't work again, then definitely GPOUT0 is the spot.

It doesn't work with latest CVS.

Quoted 5 lines

looking at OSS source codes, i found GPOUT0 is necessary only for 5.1 cards (and seems for Audigy too - i need to fix again).
so i'm not sure whether we can determine it from revision number.

Quoted 8 lines

Someone should test if the version which is doing fine here, is also OK on other revisions of the card, so 'we' could just leave the 'else statement' away. James has a rev06 to check it, for example.

Regards
Markus

There are several different versions of the SB Live.
My SB Live rev06 is not a SB Live 5.1, so it has 2 audio stereo output jacks, one for front, one for rear, and then a spdif jack. The spdif jack is not switchable between analogue and digital. It is fixed at digital.

Maybe the rev07 card is a SB Live 5.1, which has a switchable digital/analogue spdif jack, so it can output on 3 analogue stereo jacks, or with a switch (maybe GPOUT) it changes the 3rd analogue out jack into an spdif digital only jack.

Does this info help at all?

Cheers
James

#8 lore raw
Quoted 5 lines · James Courtier-Dutton

There are several different versions of the SB Live.
My SB Live rev06 is not a SB Live 5.1, so it has 2 audio stereo output jacks, one for front, one for rear, and then a spdif jack. The spdif jack is not switchable between analogue and digital. It is fixed at digital.

I haven't used it as analogue outout, but I guess that it can be switched.. at least the digital output can be switched off (don't know if it switches analogue output on, though).

Quoted 4 lines

Maybe the rev07 card is a SB Live 5.1, which has a switchable digital/analogue spdif jack, so it can output on 3 analogue stereo jacks, or with a switch (maybe GPOUT) it changes the 3rd analogue out jack into an spdif digital only jack.

I bought it as 'Soundblaster Live Player 5.1'.

Regards
Markus

#9 lore raw
Quoted 25 lines · Markus Plail
Quoted 7 lines · James Courtier-Dutton

There are several different versions of the SB Live.
My SB Live rev06 is not a SB Live 5.1, so it has 2 audio stereo output jacks, one for front, one for rear, and then a spdif jack. The spdif jack is not switchable between analogue and digital. It is fixed at digital.

I haven't used it as analogue outout, but I guess that it can be switched.. at least the digital output can be switched off (don't know if it switches analogue output on, though).

Quoted 6 lines

Maybe the rev07 card is a SB Live 5.1, which has a switchable digital/analogue spdif jack, so it can output on 3 analogue stereo jacks, or with a switch (maybe GPOUT) it changes the 3rd analogue out jack into an spdif digital only jack.

Quoted 8 lines

I bought it as 'Soundblaster Live Player 5.1'.

Regards
Markus

This think the intention for the SB Live 5.1 with alsa, was that alsamixer would display an extra switch for analogue/digital out which would switch the digital output between digital spdif and analogue stereo. Did you ever look in alsamixer for such a switch ?

Cheers
James

#10 lore raw

Hi James!

Quoted 11 lines · James Courtier-Dutton
Quoted 10 lines · Markus Plail
Quoted 6 lines · James Courtier-Dutton

There are several different versions of the SB Live.
My SB Live rev06 is not a SB Live 5.1, so it has 2 audio stereo output jacks, one for front, one for rear, and then a spdif jack. The spdif jack is not switchable between analogue and digital. It is fixed at digital.

Quoted 3 lines
Quoted 3 lines

I haven't used it as analogue outout, but I guess that it can be switched.. at least the digital output can be switched off (don't know if it switches analogue output on, though).

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Quoted 4 lines

This think the intention for the SB Live 5.1 with alsa, was that alsamixer would display an extra switch for analogue/digital out which would switch the digital output between digital spdif and analogue stereo. Did you ever look in alsamixer for such a switch ?

Yes. See above. That was the very switch I was talking about. the switch is working properly -> I can turn digital sound off. As mentioned before I have never used its analog ability further than stereo.

Regards
Markus

#11 lore raw
In reply to James Courtier-Dutton

Hi James,

At Tue, 16 Apr 2002 14:27:07 +0100,

Quoted 28 lines · James Courtier-Dutton
Quoted 25 lines · Markus Plail

Hi Takashi!

Quoted 5 lines · Takashi Iwai

Markus, could you try the latest cvs version, which fixes the "real" behavior, whether digital out works? if it doesn't work again, then definitely GPOUT0 is the spot.

It doesn't work with latest CVS.

Quoted 5 lines

looking at OSS source codes, i found GPOUT0 is necessary only for 5.1 cards (and seems for Audigy too - i need to fix again).
so i'm not sure whether we can determine it from revision number.

Someone should test if the version which is doing fine here, is also OK on other revisions of the card, so 'we' could just leave the 'else statement' away. James has a rev06 to check it, for example.

Quoted 8 lines
Quoted 4 lines

Regards
Markus

There are several different versions of the SB Live.
My SB Live rev06 is not a SB Live 5.1, so it has 2 audio stereo output jacks, one for front, one for rear, and then a spdif jack. The spdif jack is not switchable between analogue and digital. It is fixed at digital.

does "Digital/Analog Jack" switch affects the behavior on your digital jack? i guess it doesn't.
if it doesn't affect, then we can switch this bit safely on all cards.

Takashi

#12 lore raw

Hi Takashi!

Quoted 6 lines · Takashi Iwai

Hi James,

does "Digital/Analog Jack" switch affects the behavior on your digital jack? i guess it doesn't.
if it doesn't affect, then we can switch this bit safely on all cards.

So you thought that my problem was this not being enabled? I can assure you then, that this wasn't the problem. I have played with that switch all way through my alsa SB live experience. It worked properly to switch digital sound off and the default value (i.e. after having asound.state deleted) was/is digital sound ON.

Regards
Markus

#13 lore raw
In reply to Takashi Iwai
Quoted 5 lines · Takashi Iwai
Quoted 4 lines

There are several different versions of the SB Live.
My SB Live rev06 is not a SB Live 5.1, so it has 2 audio stereo output jacks, one for front, one for rear, and then a spdif jack. The spdif jack is not switchable between analogue and digital. It is fixed at digital.

Quoted 10 lines

does "Digital/Analog Jack" switch affects the behavior on your digital jack? i guess it doesn't.
if it doesn't affect, then we can switch this bit safely on all cards.

Takashi

My SB Live (non 5.1) does not have a Digital/Analog Jack, it just has a Digital Jack, so I would prefer that the Digital/Analogue Switch in alsamixer was removed for rev06 cards and below, but present for rev7 cards and above.

Currently, toggling the alsamixer Digital/Analogue Switch has no effect what so ever.

I think this rev07 passthru issue might have been the user just not knowing about the Digital/Analogue switch in alsamixer.

Cheers
James

#14 lore raw

Hi James!

Quoted 2 lines · James Courtier-Dutton

I think this rev07 passthru issue might have been the user just not knowing about the Digital/Analogue switch in alsamixer.

NO! I have been knowing about it all the time. And as I wrote to Takashi this had/has nothing to do with my problem. The switch worked, but AC3 wasn't passed through, so this is surely not the readon. I wouldn't have gotten any sound then, or better only digital enabled sound, because the preset is digital sound 'ON'.

Regards
Markus Plail

#15 lore raw
Quoted 10 lines · Markus Plail

Hi James!

Quoted 4 lines · James Courtier-Dutton

I think this rev07 passthru issue might have been the user just not knowing about the Digital/Analogue switch in alsamixer.

Quoted 11 lines

NO! I have been knowing about it all the time. And as I wrote to Takashi this had/has nothing to do with my problem. The switch worked, but AC3 wasn't passed through, so this is surely not the readon. I wouldn't have gotten any sound then, or better only digital enabled sound, because the preset is digital sound 'ON'.

Regards
Markus Plail

Sorry, it was only an idle thought. Maybe the Digital/Analogue switch never worked until now.

Cheers
James

#16 lore raw

Hi James!

Quoted 4 lines · James Courtier-Dutton

Markus Plail wrote:

Sorry, it was only an idle thought. Maybe the Digital/Analogue switch never worked until now.

No offense intended/taken, but you also have to understand that I was struggling for ages with that AC3 passthrough, really trying everything, giving bug reports and offering my help and then someone says: "I think he just didn't see that switch." ... I hope you understand. And about that switch. It worked perfectly well, i.e. switching 'normal' digital outout on/off, since I started using alsa.

Regards
Markus

#17 lore raw
In reply to Markus Plail

At Tue, 16 Apr 2002 14:47:35 +0200,

Quoted 9 lines · Markus Plail

Hi Takashi!

Quoted 3 lines · Takashi Iwai

Markus, could you try the latest cvs version, which fixes the "real" behavior, whether digital out works? if it doesn't work again, then definitely GPOUT0 is the spot.

It doesn't work with latest CVS.

ok, now it's clear.
interesting, perhaps on alsa implemented in the inversed manner. if my guess is correct, you'll get digital outs by changing /usr/share/alsa/cards/EMU10K1.conf like the following:

EMU10K1.conf renamed from usr/share/alsa/cards/EMU10K1.conf +1 -1
@@ -240,7 +240,7 @@
 				name "SB Live Analog/Digital Output Jack"
 				lock true
 				preserve true
-				value 1
+				value 0
 			}
 		]
 	}

please check this?

ciao,

Takashi

#18 lore raw

Hi Takashi!

Quoted 16 lines · Takashi Iwai

ok, now it's clear.

interesting, perhaps on alsa implemented in the inversed manner. if my guess is correct, you'll get digital outs by changing /usr/share/alsa/cards/EMU10K1.conf like the following:

EMU10K1.conf renamed from usr/share/alsa/cards/EMU10K1.conf +1 -1
@@ -240,7 +240,7 @@
 				name "SB Live Analog/Digital Output Jack"
 				lock true
 				preserve true
-				value 1
+				value 0
 			}
 		]
 	}
Quoted 1 line

please check this?

Doesn't change anything really. I did an 'alsasound stop', edited EMU10K1.conf and then 'alsasound start'. Was that right?

Regards
Markus

#19 lore raw

At Tue, 16 Apr 2002 16:42:30 +0200,

Quoted 16 lines · Markus Plail

Hi Takashi!

Quoted 12 lines · Takashi Iwai

ok, now it's clear.

interesting, perhaps on alsa implemented in the inversed manner. if my guess is correct, you'll get digital outs by changing /usr/share/alsa/cards/EMU10K1.conf like the following:

EMU10K1.conf renamed from usr/share/alsa/cards/EMU10K1.conf +0 -1
@@ -240,7 +240,7 @@
 				name "SB Live Analog/Digital Output Jack"
 				lock true
 				preserve true
-				value 1
Quoted 8 lines
Quoted 5 lines
EMU10K1.conf renamed from usr/share/alsa/cards/EMU10K1.conf +1 -0
+				value 0
 			}
 		]
 	}

please check this?

Doesn't change anything really. I did an 'alsasound stop', edited EMU10K1.conf and then 'alsasound start'. Was that right?

yes. now please check the state of this switch by alsamixer. try to play raw data once, and check whether the switch is changed. alsamixer will show the current status (and change the status if any notified).

if this doesn't work.. hmm.. needs more consideration.

Takashi

#20 lore raw

Hi Takashi!

Quoted 4 lines · Takashi Iwai

yes. now please check the state of this switch by alsamixer. try to play raw data once, and check whether the switch is changed. alsamixer will show the current status (and change the status if any notified).

This is the same as if I changed the switch in alsamixer by hand, right? This does not work. I have done this before thousands of times. The switch is working fine, but has nothing to do with my problem (IMHO). Only if I change emumixer the way you did by accident I get AC3 passthrough.
If AC3 passthrough is enabled, i.e. I watch a DVD with xine, the digital/analog switch doesn't do anything, i.e. I can't turn off the audio. If I play for example a mp3 with xmms, the digital/analog switch is working as expected.

Regards
Markus

#21 lore raw
Quoted 22 lines · Markus Plail

Hi Takashi!

Quoted 6 lines · Takashi Iwai

yes. now please check the state of this switch by alsamixer. try to play raw data once, and check whether the switch is changed. alsamixer will show the current status (and change the status if any notified).

This is the same as if I changed the switch in alsamixer by hand, right? This does not work. I have done this before thousands of times. The switch is working fine, but has nothing to do with my problem (IMHO). Only if I change emumixer the way you did by accident I get AC3 passthrough.
If AC3 passthrough is enabled, i.e. I watch a DVD with xine, the digital/analog switch doesn't do anything, i.e. I can't turn off the audio. If I play for example a mp3 with xmms, the digital/analog switch is working as expected.

Quoted 4 lines

Regards
Markus

I think what Takashi is saying is that when xine attempts to do passthru, it should change the switch automatically. It will in fact override whatever you entered in alsamixer. So maybe before it was overriding it to "analogue" instead of overriding it to "digital".

I think that is what Takashi was trying to say.

Cheers
James

#22 lore raw

Hi James!

Quoted 5 lines · James Courtier-Dutton

I think what Takashi is saying is that when xine attempts to do passthru, it should change the switch automatically. It will in fact override whatever you entered in alsamixer. So maybe before it was overriding it to "analogue" instead of overriding it to "digital". I think that is what Takashi was trying to say.

OK, but then again xine didn't change, but alsa, but then again I propbably just do not have the knowledge to really judge what is going on.

Regards
Markus

BTW: Does your rev06 card work with the 'wrong' patch from Takashi?

#23 lore raw
In reply to Takashi Iwai

Hi Takashi!

Quoted 5 lines · Takashi Iwai

At Tue, 16 Apr 2002 16:42:30 +0200,

Quoted 2 lines · Markus Plail

Doesn't change anything really. I did an 'alsasound stop', edited EMU10K1.conf and then 'alsasound start'. Was that right?

I am very sorry, I must have missed something yesterday. It DOES indeed work with the change made in EMU10K1.conf

Quoted 4 lines

yes. now please check the state of this switch by alsamixer. try to play raw data once, and check whether the switch is changed. alsamixer will show the current status (and change the status if any notified).

As I wrote in another mail: While playing in passthrough mode (xine) the switch doesn't do anything, while it works properly with normal (xmms mp3 for example) digital mode.

Sorry for the confusion
Regards
Markus

#24 lore raw
Quoted 12 lines · Markus Plail

Hi Takashi!

Quoted 5 lines · Takashi Iwai

At Tue, 16 Apr 2002 16:42:30 +0200,

Quoted 2 lines · Markus Plail

Doesn't change anything really. I did an 'alsasound stop', edited EMU10K1.conf and then 'alsasound start'. Was that right?

I am very sorry, I must have missed something yesterday. It DOES indeed work with the change made in EMU10K1.conf

Quoted 8 lines
Quoted 4 lines

yes. now please check the state of this switch by alsamixer. try to play raw data once, and check whether the switch is changed. alsamixer will show the current status (and change the status if any notified).

As I wrote in another mail: While playing in passthrough mode (xine) the switch doesn't do anything, while it works properly with normal (xmms mp3 for example) digital mode.

This behaviour is ok. When the raw S/PDIF device is used (passthough for EMU10K1), the switch is locked and can't be modified by another application.

So, we know, at least, that for your card this switch must be off. Perhaps, it's only inverted? Can somebody with shared s/pdif, line-out confirm this?

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project http://www.alsa-project.org
SuSE Linux http://www.suse.com

#25 lore raw

At Wed, 17 Apr 2002 10:33:59 +0200 (CEST),

Quoted 24 lines · Jaroslav
Quoted 12 lines · Markus Plail

Hi Takashi!

Quoted 5 lines · Takashi Iwai

At Tue, 16 Apr 2002 16:42:30 +0200,

Quoted 2 lines · Markus Plail

Doesn't change anything really. I did an 'alsasound stop', edited EMU10K1.conf and then 'alsasound start'. Was that right?

I am very sorry, I must have missed something yesterday. It DOES indeed work with the change made in EMU10K1.conf

Quoted 8 lines
Quoted 4 lines

yes. now please check the state of this switch by alsamixer. try to play raw data once, and check whether the switch is changed. alsamixer will show the current status (and change the status if any notified).

As I wrote in another mail: While playing in passthrough mode (xine) the switch doesn't do anything, while it works properly with normal (xmms mp3 for example) digital mode.

Quoted 6 lines

This behaviour is ok. When the raw S/PDIF device is used (passthough for EMU10K1), the switch is locked and can't be modified by another application.

So, we know, at least, that for your card this switch must be off. Perhaps, it's only inverted?

i believe yes. compared with oss code, i found the bit is flipped. i'll check in the fix now.

Takashi

#26 lore raw
Quoted 8 lines
Quoted 7 lines

This behaviour is ok. When the raw S/PDIF device is used (passthough for EMU10K1), the switch is locked and can't be modified by another application.

So, we know, at least, that for your card this switch must be off. Perhaps, it's only inverted?

Quoted 8 lines

i believe yes. compared with oss code, i found the bit is flipped. i'll check in the fix now.

Takashi

Could all this be the long lost solution to those "Gateway" versions of the SB Live card, which have also never worked with alsa for passthru. I don't have one of the "Gateway" cards, but I remember them being discussed on this list a long time ago.

Cheers
James