Next Generation Xilinx Zynq SoC

index 823c739..5cf3121 100644
@@ -38,22 +38,22 @@ static inline void unset_feature(CPUARMState *env, int feature)
 }
 
 #ifndef CONFIG_USER_ONLY
-static uint64_t a57_l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri)
+static uint64_t axx_l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri)
 {
     /* Number of processors is in [25:24]; otherwise we RAZ */
     return (smp_cpus - 1) << 24;
 }
 #endif
 
-static const ARMCPRegInfo cortexa57_cp_reginfo[] = {
+static const ARMCPRegInfo cortexaxx_cp_reginfo[] = {
 #ifndef CONFIG_USER_ONLY
     { .name = "L2CTLR_EL1", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 1, .crn = 11, .crm = 0, .opc2 = 2,
-      .access = PL1_RW, .readfn = a57_l2ctlr_read,
+      .access = PL1_RW, .readfn = axx_l2ctlr_read,
       .writefn = arm_cp_write_ignore },
     { .name = "L2CTLR",
       .cp = 15, .opc1 = 1, .crn = 9, .crm = 0, .opc2 = 2,
-      .access = PL1_RW, .readfn = a57_l2ctlr_read,
+      .access = PL1_RW, .readfn = axx_l2ctlr_read,
       .writefn = arm_cp_write_ignore },
 #endif
     { .name = "L2ECTLR_EL1", .state = ARM_CP_STATE_AA64,

@@ -92,10 +92,8 @@ static const ARMCPRegInfo cortexa57_cp_reginfo[] = {
     REGINFO_SENTINEL
 };
 
-static void aarch64_a57_initfn(Object *obj)
+static void aarch64_axx_initfn(ARMCPU *cpu)
 {
-    ARMCPU *cpu = ARM_CPU(obj);
-
     set_feature(&cpu->env, ARM_FEATURE_V8);
     set_feature(&cpu->env, ARM_FEATURE_VFP4);
     set_feature(&cpu->env, ARM_FEATURE_NEON);

@@ -107,13 +105,10 @@ static void aarch64_a57_initfn(Object *obj)
     set_feature(&cpu->env, ARM_FEATURE_V8_SHA256);
     set_feature(&cpu->env, ARM_FEATURE_V8_PMULL);
     set_feature(&cpu->env, ARM_FEATURE_CRC);
-    cpu->kvm_target = QEMU_KVM_ARM_TARGET_CORTEX_A57;
-    cpu->midr = 0x411fd070;
     cpu->reset_fpsid = 0x41034070;
     cpu->mvfr0 = 0x10110222;
     cpu->mvfr1 = 0x12111111;
     cpu->mvfr2 = 0x00000043;
-    cpu->ctr = 0x8444c004;
     cpu->reset_sctlr = 0x00c50838;
     cpu->id_pfr0 = 0x00000131;
     cpu->id_pfr1 = 0x00011011;

@@ -132,14 +127,25 @@ static void aarch64_a57_initfn(Object *obj)
     cpu->id_aa64pfr0 = 0x00002222;
     cpu->id_aa64dfr0 = 0x10305106;
     cpu->id_aa64isar0 = 0x00011120;
-    cpu->id_aa64mmfr0 = 0x00001124;
     cpu->dbgdidr = 0x3516d000;
     cpu->clidr = 0x0a200023;
+    cpu->dcz_blocksize = 4; /* 64 bytes */
+    define_arm_cp_regs(cpu, cortexaxx_cp_reginfo);
+}
+
+static void aarch64_a57_initfn(Object *obj)
+{
+    ARMCPU *cpu = ARM_CPU(obj);
+
+    aarch64_axx_initfn(cpu);
+
+    cpu->kvm_target = QEMU_KVM_ARM_TARGET_CORTEX_A57;
+    cpu->midr = 0x411fd070;
+    cpu->ctr = 0x8444c004; /* L1Ip = PIPT */
+    cpu->id_aa64mmfr0 = 0x00001124; /* 44 bit physical addr */
     cpu->ccsidr[0] = 0x701fe00a; /* 32KB L1 dcache */
     cpu->ccsidr[1] = 0x201fe012; /* 48KB L1 icache */
     cpu->ccsidr[2] = 0x70ffe07a; /* 2048KB L2 cache */
-    cpu->dcz_blocksize = 4; /* 64 bytes */
-    define_arm_cp_regs(cpu, cortexa57_cp_reginfo);
 }
 
 #ifdef CONFIG_USER_ONLY

index 5cf3121..0b9728e 100644
@@ -148,6 +148,20 @@ static void aarch64_a57_initfn(Object *obj)
     cpu->ccsidr[2] = 0x70ffe07a; /* 2048KB L2 cache */
 }
 
+static void aarch64_a53_initfn(Object *obj)
+{
+    ARMCPU *cpu = ARM_CPU(obj);
+
+    aarch64_axx_initfn(cpu);
+
+    cpu->midr = 0x410fd034;
+    cpu->ctr = 0x84448004; /* L1Ip = VIPT */
+    cpu->id_aa64mmfr0 = 0x00001122; /* 40 bit physical addr */
+    cpu->ccsidr[0] = 0x700fe01a; /* 32KB L1 dcache */
+    cpu->ccsidr[1] = 0x201fe00a; /* 32KB L1 icache */
+    cpu->ccsidr[2] = 0x707fe07a; /* 1024KB L2 cache */
+}
+
 #ifdef CONFIG_USER_ONLY
 static void aarch64_any_initfn(Object *obj)
 {

@@ -175,6 +189,7 @@ typedef struct ARMCPUInfo {
 
 static const ARMCPUInfo aarch64_cpus[] = {
     { .name = "cortex-a57",         .initfn = aarch64_a57_initfn },
+    { .name = "cortex-a53",         .initfn = aarch64_a53_initfn },
 #ifdef CONFIG_USER_ONLY
     { .name = "any",         .initfn = aarch64_any_initfn },
 #endif

71 lines not on this page · raw message

new file mode 100644
index 0000000..d6b3b92
@@ -0,0 +1,21 @@
+#ifndef XLNX_ZYNQMP_H_
+
+#include "qemu-common.h"
+#include "hw/arm/arm.h"
+
+#define TYPE_XLNX_ZYNQMP "xlnx,zynqmp"
+#define XLNX_ZYNQMP(obj) OBJECT_CHECK(XlnxZynqMPState, (obj), \
+                                       TYPE_XLNX_ZYNQMP)
+
+#define XLNX_ZYNQMP_NUM_CPUS 4
+
+typedef struct XlnxZynqMPState {
+    /*< private >*/
+    DeviceState parent_obj;
+    /*< public >*/
+
+    ARMCPU cpu[XLNX_ZYNQMP_NUM_CPUS];
+}  XlnxZynqMPState;
+
+#define XLNX_ZYNQMP_H_
+#endif

index 1b58d65..b9bf8db 100644
@@ -17,6 +17,11 @@
 
 #include "hw/arm/xlnx-zynqmp.h"
 
+#define GIC_NUM_SPI_INTR 128
+
+#define GIC_DIST_ADDR       0xf9010000
+#define GIC_CPU_ADDR        0xf9020000
+
 static void xlnx_zynqmp_init(Object *obj)
 {
     XlnxZynqMPState *s = XLNX_ZYNQMP(obj);

@@ -27,6 +32,9 @@ static void xlnx_zynqmp_init(Object *obj)
                           "cortex-a53-" TYPE_ARM_CPU);
         object_property_add_child(obj, "cpu", OBJECT(&s->cpu[i]), &error_abort);
     }
+
+    object_initialize(&s->gic, sizeof(s->gic), TYPE_ARM_GIC);
+    qdev_set_parent_bus(DEVICE(&s->gic), sysbus_get_default());
 }
 
 #define ERR_PROP_CHECK_RETURN(err, errp) do { \

@@ -42,9 +50,20 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
     uint8_t i;
     Error *err = NULL;
 
+    qdev_prop_set_uint32(DEVICE(&s->gic), "num-irq", GIC_NUM_SPI_INTR + 32);
+    qdev_prop_set_uint32(DEVICE(&s->gic), "revision", 2);
+    qdev_prop_set_uint32(DEVICE(&s->gic), "num-cpu", XLNX_ZYNQMP_NUM_CPUS);
+    object_property_set_bool(OBJECT(&s->gic), true, "realized", &err);
+    ERR_PROP_CHECK_RETURN(err, errp);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 0, GIC_DIST_ADDR);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 1, GIC_CPU_ADDR);
+
     for (i = 0; i < XLNX_ZYNQMP_NUM_CPUS; i++) {
         object_property_set_bool(OBJECT(&s->cpu[i]), true, "realized", &err);
         ERR_PROP_CHECK_RETURN(err, errp);
+
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i,
+                           qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_IRQ));
     }
 }
 

index d6b3b92..d29c7de 100644
@@ -2,6 +2,7 @@
 
 #include "qemu-common.h"
 #include "hw/arm/arm.h"
+#include "hw/intc/arm_gic.h"
 
 #define TYPE_XLNX_ZYNQMP "xlnx,zynqmp"
 #define XLNX_ZYNQMP(obj) OBJECT_CHECK(XlnxZynqMPState, (obj), \

@@ -15,6 +16,7 @@ typedef struct XlnxZynqMPState {
     /*< public >*/
 
     ARMCPU cpu[XLNX_ZYNQMP_NUM_CPUS];
+    GICState gic;
 }  XlnxZynqMPState;
 
 #define XLNX_ZYNQMP_H_

index b9bf8db..dc84192 100644
@@ -19,9 +19,17 @@
 
 #define GIC_NUM_SPI_INTR 128
 
+#define ARM_PHYS_TIMER_PPI  30
+#define ARM_VIRT_TIMER_PPI  27
+
 #define GIC_DIST_ADDR       0xf9010000
 #define GIC_CPU_ADDR        0xf9020000
 
+static inline int arm_gic_ppi_index(int cpu_nr, int ppi_index)
+{
+    return GIC_NUM_SPI_INTR + cpu_nr * 32 + ppi_index;
+}
+
 static void xlnx_zynqmp_init(Object *obj)
 {
     XlnxZynqMPState *s = XLNX_ZYNQMP(obj);

@@ -59,11 +67,19 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->gic), 1, GIC_CPU_ADDR);
 
     for (i = 0; i < XLNX_ZYNQMP_NUM_CPUS; i++) {
+        qemu_irq irq;
+
         object_property_set_bool(OBJECT(&s->cpu[i]), true, "realized", &err);
         ERR_PROP_CHECK_RETURN(err, errp);
 
         sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i,
                            qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_IRQ));
+        irq = qdev_get_gpio_in(DEVICE(&s->gic),
+                               arm_gic_ppi_index(i, ARM_PHYS_TIMER_PPI));
+        qdev_connect_gpio_out(DEVICE(&s->cpu[i]), 0, irq);
+        irq = qdev_get_gpio_in(DEVICE(&s->gic),
+                               arm_gic_ppi_index(i, ARM_VIRT_TIMER_PPI));
+        qdev_connect_gpio_out(DEVICE(&s->cpu[i]), 1, irq);
     }
 }
 

index 55b6293..5994306 100644
@@ -141,7 +141,7 @@
 #define GEM_DESCONF6      (0x00000294/4)
 #define GEM_DESCONF7      (0x00000298/4)
 
-#define GEM_MAXREG        (0x00000640/4) /* Last valid GEM address */
+#define CADENCE_GEM_MAXREG        (0x00000640/4) /* Last valid GEM address */
 
 /*****************************************/
 #define GEM_NWCTRL_TXSTART     0x00000200 /* Transmit Enable */

@@ -350,9 +350,9 @@ static inline void rx_desc_set_sar(unsigned *desc, int sar_idx)
 }
 
 #define TYPE_CADENCE_GEM "cadence_gem"
-#define GEM(obj) OBJECT_CHECK(GemState, (obj), TYPE_CADENCE_GEM)
+#define CADENCE_GEM(obj) OBJECT_CHECK(CadenceGEMState, (obj), TYPE_CADENCE_GEM)
 
-typedef struct GemState {
+typedef struct CadenceGEMState {
     SysBusDevice parent_obj;
 
     MemoryRegion iomem;

@@ -361,15 +361,15 @@ typedef struct GemState {
     qemu_irq irq;
 
     /* GEM registers backing store */
-    uint32_t regs[GEM_MAXREG];
+    uint32_t regs[CADENCE_GEM_MAXREG];
     /* Mask of register bits which are write only */
-    uint32_t regs_wo[GEM_MAXREG];
+    uint32_t regs_wo[CADENCE_GEM_MAXREG];
     /* Mask of register bits which are read only */
-    uint32_t regs_ro[GEM_MAXREG];
+    uint32_t regs_ro[CADENCE_GEM_MAXREG];
     /* Mask of register bits which are clear on read */
-    uint32_t regs_rtc[GEM_MAXREG];
+    uint32_t regs_rtc[CADENCE_GEM_MAXREG];
     /* Mask of register bits which are write 1 to clear */
-    uint32_t regs_w1c[GEM_MAXREG];
+    uint32_t regs_w1c[CADENCE_GEM_MAXREG];
 
     /* PHY registers backing store */
     uint16_t phy_regs[32];

@@ -385,7 +385,7 @@ typedef struct GemState {
     unsigned rx_desc[2];
 
     bool sar_active[4];
-} GemState;
+} CadenceGEMState;
 
 /* The broadcast MAC address: 0xFFFFFFFFFFFF */
 static const uint8_t broadcast_addr[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };

@@ -395,7 +395,7 @@ static const uint8_t broadcast_addr[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
  * One time initialization.
  * Set masks to identify which register bits have magical clear properties
  */
-static void gem_init_register_masks(GemState *s)
+static void gem_init_register_masks(CadenceGEMState *s)
 {
     /* Mask of register bits which are read only */
     memset(&s->regs_ro[0], 0, sizeof(s->regs_ro));

@@ -430,7 +430,7 @@ static void gem_init_register_masks(GemState *s)
  * phy_update_link:
  * Make the emulated PHY link state match the QEMU "interface" state.
  */
-static void phy_update_link(GemState *s)
+static void phy_update_link(CadenceGEMState *s)
 {
     DB_PRINT("down %d\n", qemu_get_queue(s->nic)->link_down);
 

@@ -450,7 +450,7 @@ static void phy_update_link(GemState *s)
 
 static int gem_can_receive(NetClientState *nc)
 {
-    GemState *s;
+    CadenceGEMState *s;
 
     s = qemu_get_nic_opaque(nc);
 

@@ -483,7 +483,7 @@ static int gem_can_receive(NetClientState *nc)
  * gem_update_int_status:
  * Raise or lower interrupt based on current status.
  */
-static void gem_update_int_status(GemState *s)
+static void gem_update_int_status(CadenceGEMState *s)
 {
     if (s->regs[GEM_ISR]) {
         DB_PRINT("asserting int. (0x%08x)\n", s->regs[GEM_ISR]);

@@ -495,7 +495,7 @@ static void gem_update_int_status(GemState *s)
  * gem_receive_updatestats:
  * Increment receive statistics.
  */
-static void gem_receive_updatestats(GemState *s, const uint8_t *packet,
+static void gem_receive_updatestats(CadenceGEMState *s, const uint8_t *packet,
                                     unsigned bytes)
 {
     uint64_t octets;

@@ -586,7 +586,7 @@ static unsigned calc_mac_hash(const uint8_t *mac)
  * GEM_RM_PROMISCUOUS_ACCEPT, GEM_RX_BROADCAST_ACCEPT,
  * GEM_RX_MULTICAST_HASH_ACCEPT or GEM_RX_UNICAST_HASH_ACCEPT
  */
-static int gem_mac_address_filter(GemState *s, const uint8_t *packet)
+static int gem_mac_address_filter(CadenceGEMState *s, const uint8_t *packet)
 {
     uint8_t *gem_spaddr;
     int i;

@@ -636,7 +636,7 @@ static int gem_mac_address_filter(GemState *s, const uint8_t *packet)
     return GEM_RX_REJECT;
 }
 
-static void gem_get_rx_desc(GemState *s)
+static void gem_get_rx_desc(CadenceGEMState *s)
 {
     DB_PRINT("read descriptor 0x%x\n", (unsigned)s->rx_desc_addr);
     /* read current descriptor */

@@ -660,7 +660,7 @@ static void gem_get_rx_desc(GemState *s)
  */
 static ssize_t gem_receive(NetClientState *nc, const uint8_t *buf, size_t size)
 {
-    GemState *s;
+    CadenceGEMState *s;
     unsigned   rxbufsize, bytes_to_copy;
     unsigned   rxbuf_offset;
     uint8_t    rxbuf[2048];

@@ -810,7 +810,7 @@ static ssize_t gem_receive(NetClientState *nc, const uint8_t *buf, size_t size)
  * gem_transmit_updatestats:
  * Increment transmit statistics.
  */
-static void gem_transmit_updatestats(GemState *s, const uint8_t *packet,
+static void gem_transmit_updatestats(CadenceGEMState *s, const uint8_t *packet,
                                      unsigned bytes)
 {
     uint64_t octets;

@@ -856,7 +856,7 @@ static void gem_transmit_updatestats(GemState *s, const uint8_t *packet,
  * gem_transmit:
  * Fish packets out of the descriptor ring and feed them to QEMU
  */
-static void gem_transmit(GemState *s)
+static void gem_transmit(CadenceGEMState *s)
 {
     unsigned    desc[2];
     hwaddr packet_desc_addr;

@@ -976,7 +976,7 @@ static void gem_transmit(GemState *s)
     }
 }
 
-static void gem_phy_reset(GemState *s)
+static void gem_phy_reset(CadenceGEMState *s)
 {
     memset(&s->phy_regs[0], 0, sizeof(s->phy_regs));
     s->phy_regs[PHY_REG_CONTROL] = 0x1140;

@@ -1004,7 +1004,7 @@ static void gem_phy_reset(GemState *s)
 static void gem_reset(DeviceState *d)
 {
     int i;
-    GemState *s = GEM(d);
+    CadenceGEMState *s = CADENCE_GEM(d);
 
     DB_PRINT("\n");
 

@@ -1032,13 +1032,13 @@ static void gem_reset(DeviceState *d)
     gem_update_int_status(s);
 }
 
-static uint16_t gem_phy_read(GemState *s, unsigned reg_num)
+static uint16_t gem_phy_read(CadenceGEMState *s, unsigned reg_num)
 {
     DB_PRINT("reg: %d value: 0x%04x\n", reg_num, s->phy_regs[reg_num]);
     return s->phy_regs[reg_num];
 }
 
-static void gem_phy_write(GemState *s, unsigned reg_num, uint16_t val)
+static void gem_phy_write(CadenceGEMState *s, unsigned reg_num, uint16_t val)
 {
     DB_PRINT("reg: %d value: 0x%04x\n", reg_num, val);
 

@@ -1072,10 +1072,10 @@ static void gem_phy_write(GemState *s, unsigned reg_num, uint16_t val)
  */
 static uint64_t gem_read(void *opaque, hwaddr offset, unsigned size)
 {
-    GemState *s;
+    CadenceGEMState *s;
     uint32_t retval;
 
-    s = (GemState *)opaque;
+    s = (CadenceGEMState *)opaque;
 
     offset >>= 2;
     retval = s->regs[offset];

@@ -1120,7 +1120,7 @@ static uint64_t gem_read(void *opaque, hwaddr offset, unsigned size)
 static void gem_write(void *opaque, hwaddr offset, uint64_t val,
         unsigned size)
 {
-    GemState *s = (GemState *)opaque;
+    CadenceGEMState *s = (CadenceGEMState *)opaque;
     uint32_t readonly;
 
     DB_PRINT("offset: 0x%04x write: 0x%08x ", (unsigned)offset, (unsigned)val);

@@ -1226,7 +1226,7 @@ static NetClientInfo net_gem_info = {
 static int gem_init(SysBusDevice *sbd)
 {
     DeviceState *dev = DEVICE(sbd);
-    GemState *s = GEM(dev);
+    CadenceGEMState *s = CADENCE_GEM(dev);
 
     DB_PRINT("\n");
 

@@ -1248,18 +1248,18 @@ static const VMStateDescription vmstate_cadence_gem = {
     .version_id = 2,
     .minimum_version_id = 2,
     .fields = (VMStateField[]) {
-        VMSTATE_UINT32_ARRAY(regs, GemState, GEM_MAXREG),
-        VMSTATE_UINT16_ARRAY(phy_regs, GemState, 32),
-        VMSTATE_UINT8(phy_loop, GemState),
-        VMSTATE_UINT32(rx_desc_addr, GemState),
-        VMSTATE_UINT32(tx_desc_addr, GemState),
-        VMSTATE_BOOL_ARRAY(sar_active, GemState, 4),
+        VMSTATE_UINT32_ARRAY(regs, CadenceGEMState, CADENCE_GEM_MAXREG),
+        VMSTATE_UINT16_ARRAY(phy_regs, CadenceGEMState, 32),
+        VMSTATE_UINT8(phy_loop, CadenceGEMState),
+        VMSTATE_UINT32(rx_desc_addr, CadenceGEMState),
+        VMSTATE_UINT32(tx_desc_addr, CadenceGEMState),
+        VMSTATE_BOOL_ARRAY(sar_active, CadenceGEMState, 4),
         VMSTATE_END_OF_LIST(),
     }
 };
 
 static Property gem_properties[] = {
-    DEFINE_NIC_PROPERTIES(GemState, conf),
+    DEFINE_NIC_PROPERTIES(CadenceGEMState, conf),
     DEFINE_PROP_END_OF_LIST(),
 };
 

@@ -1277,7 +1277,7 @@ static void gem_class_init(ObjectClass *klass, void *data)
 static const TypeInfo gem_info = {
     .name  = TYPE_CADENCE_GEM,
     .parent = TYPE_SYS_BUS_DEVICE,
-    .instance_size  = sizeof(GemState),
+    .instance_size  = sizeof(CadenceGEMState),
     .class_init = gem_class_init,
 };
 

index 5994306..dafe914 100644
@@ -24,8 +24,7 @@
 
 #include <zlib.h> /* For crc32 */
 
-#include "hw/sysbus.h"
-#include "net/net.h"
+#include "hw/net/cadence_gem.h"
 #include "net/checksum.h"
 
 #ifdef CADENCE_GEM_ERR_DEBUG

@@ -141,8 +140,6 @@
 #define GEM_DESCONF6      (0x00000294/4)
 #define GEM_DESCONF7      (0x00000298/4)
 
-#define CADENCE_GEM_MAXREG        (0x00000640/4) /* Last valid GEM address */
-
 /*****************************************/
 #define GEM_NWCTRL_TXSTART     0x00000200 /* Transmit Enable */
 #define GEM_NWCTRL_TXENA       0x00000008 /* Transmit Enable */

@@ -349,44 +346,6 @@ static inline void rx_desc_set_sar(unsigned *desc, int sar_idx)
     desc[1] |= R_DESC_1_RX_SAR_MATCH;
 }
 
-#define TYPE_CADENCE_GEM "cadence_gem"
-#define CADENCE_GEM(obj) OBJECT_CHECK(CadenceGEMState, (obj), TYPE_CADENCE_GEM)
-
-typedef struct CadenceGEMState {
-    SysBusDevice parent_obj;
-
-    MemoryRegion iomem;
-    NICState *nic;
-    NICConf conf;
-    qemu_irq irq;
-
-    /* GEM registers backing store */
-    uint32_t regs[CADENCE_GEM_MAXREG];
-    /* Mask of register bits which are write only */
-    uint32_t regs_wo[CADENCE_GEM_MAXREG];
-    /* Mask of register bits which are read only */
-    uint32_t regs_ro[CADENCE_GEM_MAXREG];
-    /* Mask of register bits which are clear on read */
-    uint32_t regs_rtc[CADENCE_GEM_MAXREG];
-    /* Mask of register bits which are write 1 to clear */
-    uint32_t regs_w1c[CADENCE_GEM_MAXREG];
-
-    /* PHY registers backing store */
-    uint16_t phy_regs[32];
-
-    uint8_t phy_loop; /* Are we in phy loopback? */
-
-    /* The current DMA descriptor pointers */
-    uint32_t rx_desc_addr;
-    uint32_t tx_desc_addr;
-
-    uint8_t can_rx_state; /* Debug only */
-
-    unsigned rx_desc[2];
-
-    bool sar_active[4];
-} CadenceGEMState;
-
 /* The broadcast MAC address: 0xFFFFFFFFFFFF */
 static const uint8_t broadcast_addr[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
 

49 lines not on this page · raw message

index 7044b35..23f548d 100644
@@ -85,8 +85,8 @@
 #define LOCAL_LOOPBACK         (0x2 << UART_MR_CHMODE_SH)
 #define REMOTE_LOOPBACK        (0x3 << UART_MR_CHMODE_SH)
 
-#define RX_FIFO_SIZE           16
-#define TX_FIFO_SIZE           16
+#define CADENCE_UART_RX_FIFO_SIZE           16
+#define CADENCE_UART_TX_FIFO_SIZE           16
 #define UART_INPUT_CLK         50000000
 
 #define R_CR       (0x00/4)

@@ -108,10 +108,11 @@
 #define R_PWID     (0x40/4)
 #define R_TTRIG    (0x44/4)
 
-#define R_MAX (R_TTRIG + 1)
+#define CADENCE_UART_R_MAX (0x48/4)
 
 #define TYPE_CADENCE_UART "cadence_uart"
-#define CADENCE_UART(obj) OBJECT_CHECK(UartState, (obj), TYPE_CADENCE_UART)
+#define CADENCE_UART(obj) OBJECT_CHECK(CadenceUARTState, (obj), \
+                                       TYPE_CADENCE_UART)
 
 typedef struct {
     /*< private >*/

@@ -119,9 +120,9 @@ typedef struct {
     /*< public >*/
 
     MemoryRegion iomem;
-    uint32_t r[R_MAX];
-    uint8_t rx_fifo[RX_FIFO_SIZE];
-    uint8_t tx_fifo[TX_FIFO_SIZE];
+    uint32_t r[CADENCE_UART_R_MAX];
+    uint8_t rx_fifo[CADENCE_UART_RX_FIFO_SIZE];
+    uint8_t tx_fifo[CADENCE_UART_TX_FIFO_SIZE];
     uint32_t rx_wpos;
     uint32_t rx_count;
     uint32_t tx_count;

@@ -129,17 +130,19 @@ typedef struct {
     CharDriverState *chr;
     qemu_irq irq;
     QEMUTimer *fifo_trigger_handle;
-} UartState;
+} CadenceUARTState;
 
-static void uart_update_status(UartState *s)
+static void uart_update_status(CadenceUARTState *s)
 {
     s->r[R_SR] = 0;
 
-    s->r[R_SR] |= s->rx_count == RX_FIFO_SIZE ? UART_SR_INTR_RFUL : 0;
+    s->r[R_SR] |= s->rx_count == CADENCE_UART_RX_FIFO_SIZE ? UART_SR_INTR_RFUL
+                                                           : 0;
     s->r[R_SR] |= !s->rx_count ? UART_SR_INTR_REMPTY : 0;
     s->r[R_SR] |= s->rx_count >= s->r[R_RTRIG] ? UART_SR_INTR_RTRIG : 0;
 
-    s->r[R_SR] |= s->tx_count == TX_FIFO_SIZE ? UART_SR_INTR_TFUL : 0;
+    s->r[R_SR] |= s->tx_count == CADENCE_UART_TX_FIFO_SIZE ? UART_SR_INTR_TFUL
+                                                           : 0;
     s->r[R_SR] |= !s->tx_count ? UART_SR_INTR_TEMPTY : 0;
     s->r[R_SR] |= s->tx_count >= s->r[R_TTRIG] ? UART_SR_TTRIG : 0;
 

@@ -150,14 +153,14 @@ static void uart_update_status(UartState *s)
 
 static void fifo_trigger_update(void *opaque)
 {
-    UartState *s = (UartState *)opaque;
+    CadenceUARTState *s = opaque;
 
     s->r[R_CISR] |= UART_INTR_TIMEOUT;
 
     uart_update_status(s);
 }
 
-static void uart_rx_reset(UartState *s)
+static void uart_rx_reset(CadenceUARTState *s)
 {
     s->rx_wpos = 0;
     s->rx_count = 0;

@@ -166,12 +169,12 @@ static void uart_rx_reset(UartState *s)
     }
 }
 
-static void uart_tx_reset(UartState *s)
+static void uart_tx_reset(CadenceUARTState *s)
 {
     s->tx_count = 0;
 }
 
-static void uart_send_breaks(UartState *s)
+static void uart_send_breaks(CadenceUARTState *s)
 {
     int break_enabled = 1;
 

@@ -181,7 +184,7 @@ static void uart_send_breaks(UartState *s)
     }
 }
 
-static void uart_parameters_setup(UartState *s)
+static void uart_parameters_setup(CadenceUARTState *s)
 {
     QEMUSerialSetParams ssp;
     unsigned int baud_rate, packet_size;

@@ -236,20 +239,20 @@ static void uart_parameters_setup(UartState *s)
 
 static int uart_can_receive(void *opaque)
 {
-    UartState *s = (UartState *)opaque;
-    int ret = MAX(RX_FIFO_SIZE, TX_FIFO_SIZE);
+    CadenceUARTState *s = opaque;
+    int ret = MAX(CADENCE_UART_RX_FIFO_SIZE, CADENCE_UART_TX_FIFO_SIZE);
     uint32_t ch_mode = s->r[R_MR] & UART_MR_CHMODE;
 
     if (ch_mode == NORMAL_MODE || ch_mode == ECHO_MODE) {
-        ret = MIN(ret, RX_FIFO_SIZE - s->rx_count);
+        ret = MIN(ret, CADENCE_UART_RX_FIFO_SIZE - s->rx_count);
     }
     if (ch_mode == REMOTE_LOOPBACK || ch_mode == ECHO_MODE) {
-        ret = MIN(ret, TX_FIFO_SIZE - s->tx_count);
+        ret = MIN(ret, CADENCE_UART_TX_FIFO_SIZE - s->tx_count);
     }
     return ret;
 }
 
-static void uart_ctrl_update(UartState *s)
+static void uart_ctrl_update(CadenceUARTState *s)
 {
     if (s->r[R_CR] & UART_CR_TXRST) {
         uart_tx_reset(s);

@@ -268,7 +271,7 @@ static void uart_ctrl_update(UartState *s)
 
 static void uart_write_rx_fifo(void *opaque, const uint8_t *buf, int size)
 {
-    UartState *s = (UartState *)opaque;
+    CadenceUARTState *s = opaque;
     uint64_t new_rx_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
     int i;
 

@@ -276,12 +279,12 @@ static void uart_write_rx_fifo(void *opaque, const uint8_t *buf, int size)
         return;
     }
 
-    if (s->rx_count == RX_FIFO_SIZE) {
+    if (s->rx_count == CADENCE_UART_RX_FIFO_SIZE) {
         s->r[R_CISR] |= UART_INTR_ROVR;
     } else {
         for (i = 0; i < size; i++) {
             s->rx_fifo[s->rx_wpos] = buf[i];
-            s->rx_wpos = (s->rx_wpos + 1) % RX_FIFO_SIZE;
+            s->rx_wpos = (s->rx_wpos + 1) % CADENCE_UART_RX_FIFO_SIZE;
             s->rx_count++;
         }
         timer_mod(s->fifo_trigger_handle, new_rx_time +

@@ -293,7 +296,7 @@ static void uart_write_rx_fifo(void *opaque, const uint8_t *buf, int size)
 static gboolean cadence_uart_xmit(GIOChannel *chan, GIOCondition cond,
                                   void *opaque)
 {
-    UartState *s = opaque;
+    CadenceUARTState *s = opaque;
     int ret;
 
     /* instant drain the fifo when there's no back-end */

@@ -320,14 +323,15 @@ static gboolean cadence_uart_xmit(GIOChannel *chan, GIOCondition cond,
     return FALSE;
 }
 
-static void uart_write_tx_fifo(UartState *s, const uint8_t *buf, int size)
+static void uart_write_tx_fifo(CadenceUARTState *s, const uint8_t *buf,
+                               int size)
 {
     if ((s->r[R_CR] & UART_CR_TX_DIS) || !(s->r[R_CR] & UART_CR_TX_EN)) {
         return;
     }
 
-    if (size > TX_FIFO_SIZE - s->tx_count) {
-        size = TX_FIFO_SIZE - s->tx_count;
+    if (size > CADENCE_UART_TX_FIFO_SIZE - s->tx_count) {
+        size = CADENCE_UART_TX_FIFO_SIZE - s->tx_count;
         /*
          * This can only be a guest error via a bad tx fifo register push,
          * as can_receive() should stop remote loop and echo modes ever getting

@@ -345,7 +349,7 @@ static void uart_write_tx_fifo(UartState *s, const uint8_t *buf, int size)
 
 static void uart_receive(void *opaque, const uint8_t *buf, int size)
 {
-    UartState *s = (UartState *)opaque;
+    CadenceUARTState *s = opaque;
     uint32_t ch_mode = s->r[R_MR] & UART_MR_CHMODE;
 
     if (ch_mode == NORMAL_MODE || ch_mode == ECHO_MODE) {

@@ -358,7 +362,7 @@ static void uart_receive(void *opaque, const uint8_t *buf, int size)
 
 static void uart_event(void *opaque, int event)
 {
-    UartState *s = (UartState *)opaque;
+    CadenceUARTState *s = opaque;
     uint8_t buf = '\0';
 
     if (event == CHR_EVENT_BREAK) {

@@ -368,15 +372,15 @@ static void uart_event(void *opaque, int event)
     uart_update_status(s);
 }
 
-static void uart_read_rx_fifo(UartState *s, uint32_t *c)
+static void uart_read_rx_fifo(CadenceUARTState *s, uint32_t *c)
 {
     if ((s->r[R_CR] & UART_CR_RX_DIS) || !(s->r[R_CR] & UART_CR_RX_EN)) {
         return;
     }
 
     if (s->rx_count) {
-        uint32_t rx_rpos =
-                (RX_FIFO_SIZE + s->rx_wpos - s->rx_count) % RX_FIFO_SIZE;
+        uint32_t rx_rpos = (CADENCE_UART_RX_FIFO_SIZE + s->rx_wpos -
+                            s->rx_count) % CADENCE_UART_RX_FIFO_SIZE;
         *c = s->rx_fifo[rx_rpos];
         s->rx_count--;
 

@@ -393,7 +397,7 @@ static void uart_read_rx_fifo(UartState *s, uint32_t *c)
 static void uart_write(void *opaque, hwaddr offset,
                           uint64_t value, unsigned size)
 {
-    UartState *s = (UartState *)opaque;
+    CadenceUARTState *s = opaque;
 
     DB_PRINT(" offset:%x data:%08x\n", (unsigned)offset, (unsigned)value);
     offset >>= 2;

@@ -437,11 +441,11 @@ static void uart_write(void *opaque, hwaddr offset,
 static uint64_t uart_read(void *opaque, hwaddr offset,
         unsigned size)
 {
-    UartState *s = (UartState *)opaque;
+    CadenceUARTState *s = opaque;
     uint32_t c = 0;
 
     offset >>= 2;
-    if (offset >= R_MAX) {
+    if (offset >= CADENCE_UART_R_MAX) {
         c = 0;
     } else if (offset == R_TX_RX) {
         uart_read_rx_fifo(s, &c);

@@ -461,7 +465,7 @@ static const MemoryRegionOps uart_ops = {
 
 static void cadence_uart_reset(DeviceState *dev)
 {
-    UartState *s = CADENCE_UART(dev);
+    CadenceUARTState *s = CADENCE_UART(dev);
 
     s->r[R_CR] = 0x00000128;
     s->r[R_IMR] = 0;

@@ -478,7 +482,7 @@ static void cadence_uart_reset(DeviceState *dev)
 
 static int cadence_uart_init(SysBusDevice *dev)
 {
-    UartState *s = CADENCE_UART(dev);
+    CadenceUARTState *s = CADENCE_UART(dev);
 
     memory_region_init_io(&s->iomem, OBJECT(s), &uart_ops, s, "uart", 0x1000);
     sysbus_init_mmio(dev, &s->iomem);

@@ -501,7 +505,7 @@ static int cadence_uart_init(SysBusDevice *dev)
 
 static int cadence_uart_post_load(void *opaque, int version_id)
 {
-    UartState *s = opaque;
+    CadenceUARTState *s = opaque;
 
     uart_parameters_setup(s);
     uart_update_status(s);

@@ -514,13 +518,15 @@ static const VMStateDescription vmstate_cadence_uart = {
     .minimum_version_id = 2,
     .post_load = cadence_uart_post_load,
     .fields = (VMStateField[]) {
-        VMSTATE_UINT32_ARRAY(r, UartState, R_MAX),
-        VMSTATE_UINT8_ARRAY(rx_fifo, UartState, RX_FIFO_SIZE),
-        VMSTATE_UINT8_ARRAY(tx_fifo, UartState, RX_FIFO_SIZE),
-        VMSTATE_UINT32(rx_count, UartState),
-        VMSTATE_UINT32(tx_count, UartState),
-        VMSTATE_UINT32(rx_wpos, UartState),
-        VMSTATE_TIMER_PTR(fifo_trigger_handle, UartState),
+        VMSTATE_UINT32_ARRAY(r, CadenceUARTState, CADENCE_UART_R_MAX),
+        VMSTATE_UINT8_ARRAY(rx_fifo, CadenceUARTState,
+                            CADENCE_UART_RX_FIFO_SIZE),
+        VMSTATE_UINT8_ARRAY(tx_fifo, CadenceUARTState,
+                            CADENCE_UART_TX_FIFO_SIZE),
+        VMSTATE_UINT32(rx_count, CadenceUARTState),
+        VMSTATE_UINT32(tx_count, CadenceUARTState),
+        VMSTATE_UINT32(rx_wpos, CadenceUARTState),
+        VMSTATE_TIMER_PTR(fifo_trigger_handle, CadenceUARTState),
         VMSTATE_END_OF_LIST()
     }
 };

@@ -538,7 +544,7 @@ static void cadence_uart_class_init(ObjectClass *klass, void *data)
 static const TypeInfo cadence_uart_info = {
     .name          = TYPE_CADENCE_UART,
     .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(UartState),
+    .instance_size = sizeof(CadenceUARTState),
     .class_init    = cadence_uart_class_init,
 };
 

index 23f548d..4509e01 100644
@@ -16,9 +16,7 @@
  * with this program; if not, see <http://www.gnu.org/licenses/>.
  */
 
-#include "hw/sysbus.h"
-#include "sysemu/char.h"
-#include "qemu/timer.h"
+#include "hw/char/cadence_uart.h"
 
 #ifdef CADENCE_UART_ERR_DEBUG
 #define DB_PRINT(...) do { \

@@ -85,8 +83,6 @@
 #define LOCAL_LOOPBACK         (0x2 << UART_MR_CHMODE_SH)
 #define REMOTE_LOOPBACK        (0x3 << UART_MR_CHMODE_SH)
 
-#define CADENCE_UART_RX_FIFO_SIZE           16
-#define CADENCE_UART_TX_FIFO_SIZE           16
 #define UART_INPUT_CLK         50000000
 
 #define R_CR       (0x00/4)

@@ -108,29 +104,6 @@
 #define R_PWID     (0x40/4)
 #define R_TTRIG    (0x44/4)
 
-#define CADENCE_UART_R_MAX (0x48/4)
-
-#define TYPE_CADENCE_UART "cadence_uart"
-#define CADENCE_UART(obj) OBJECT_CHECK(CadenceUARTState, (obj), \
-                                       TYPE_CADENCE_UART)
-
-typedef struct {
-    /*< private >*/
-    SysBusDevice parent_obj;
-    /*< public >*/
-
-    MemoryRegion iomem;
-    uint32_t r[CADENCE_UART_R_MAX];
-    uint8_t rx_fifo[CADENCE_UART_RX_FIFO_SIZE];
-    uint8_t tx_fifo[CADENCE_UART_TX_FIFO_SIZE];
-    uint32_t rx_wpos;
-    uint32_t rx_count;
-    uint32_t tx_count;
-    uint64_t char_tx_time;
-    CharDriverState *chr;
-    qemu_irq irq;
-    QEMUTimer *fifo_trigger_handle;
-} CadenceUARTState;
 
 static void uart_update_status(CadenceUARTState *s)
 {

new file mode 100644
index 0000000..3456d4c
@@ -0,0 +1,35 @@
+#ifndef CADENCE_UART_H_
+
+#include "hw/sysbus.h"
+#include "sysemu/char.h"
+#include "qemu/timer.h"
+
+#define CADENCE_UART_RX_FIFO_SIZE           16
+#define CADENCE_UART_TX_FIFO_SIZE           16
+
+#define CADENCE_UART_R_MAX (0x48/4)
+
+#define TYPE_CADENCE_UART "cadence_uart"
+#define CADENCE_UART(obj) OBJECT_CHECK(CadenceUARTState, (obj), \
+                                       TYPE_CADENCE_UART)
+
+typedef struct {
+    /*< private >*/
+    SysBusDevice parent_obj;
+
+    /*< public >*/
+    MemoryRegion iomem;
+    uint32_t r[CADENCE_UART_R_MAX];
+    uint8_t rx_fifo[CADENCE_UART_RX_FIFO_SIZE];
+    uint8_t tx_fifo[CADENCE_UART_TX_FIFO_SIZE];
+    uint32_t rx_wpos;
+    uint32_t rx_count;
+    uint32_t tx_count;
+    uint64_t char_tx_time;
+    CharDriverState *chr;
+    qemu_irq irq;
+    QEMUTimer *fifo_trigger_handle;
+} CadenceUARTState;
+
+#define CADENCE_UART_H_
+#endif

52 lines not on this page · raw message

index eec3e94..6042cbc 100644
@@ -18,11 +18,16 @@
 #include "hw/arm/xlnx-zynqmp.h"
 #include "hw/boards.h"
 #include "qemu/error-report.h"
+#include "exec/address-spaces.h"
 
 typedef struct XlnxEP108 {
     XlnxZynqMPState soc;
+    MemoryRegion ddr_ram;
 } XlnxEP108;
 
+/* Max 2GB RAM */
+#define EP108_MAX_RAM_SIZE 0x80000000ull
+
 static void xlnx_ep108_init(MachineState *machine)
 {
     XlnxEP108 *s = g_new0(XlnxEP108, 1);

@@ -36,6 +41,22 @@ static void xlnx_ep108_init(MachineState *machine)
         error_report("%s", error_get_pretty(err));
         exit(1);
     }
+
+    if (machine->ram_size > EP108_MAX_RAM_SIZE) {
+        error_report("WARNING: RAM size " RAM_ADDR_FMT " above max supported, "
+                     "reduced to %llx", machine->ram_size, EP108_MAX_RAM_SIZE);
+        machine->ram_size = EP108_MAX_RAM_SIZE;
+    }
+
+    if (machine->ram_size <= 0x08000000) {
+        error_report("WARNING: RAM size " RAM_ADDR_FMT " is small for EP108\n",
+                     machine->ram_size);
+    }
+
+    memory_region_init_ram(&s->ddr_ram, NULL, "ddr-ram", machine->ram_size,
+                           &error_abort);
+    vmstate_register_ram_global(&s->ddr_ram);
+    memory_region_add_subregion(get_system_memory(), 0, &s->ddr_ram);
 }
 
 static QEMUMachine xlnx_ep108_machine = {

index e432d0a..1287528 100644
@@ -96,6 +96,14 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
     for (i = 0; i < XLNX_ZYNQMP_NUM_CPUS; i++) {
         qemu_irq irq;
 
+        object_property_set_int(OBJECT(&s->cpu[i]), QEMU_PSCI_CONDUIT_SMC,
+                                "psci-conduit", &error_abort);
+        if (i > 0) {
+            /* Secondary CPUs start in PSCI powered-down state */
+            object_property_set_bool(OBJECT(&s->cpu[i]), true,
+                                     "start-powered-off", &error_abort);
+        }
+
         object_property_set_bool(OBJECT(&s->cpu[i]), true, "realized", &err);
         ERR_PROP_CHECK_RETURN(err, errp);