Skip to contentSkip to conversation

riscv: Separate FPU register size from core register size in gdbstub

PATCH In review Keith Packard via 3 participants 5 messages Jan 28, 2020 RISC-V

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 riscv: Separate FPU register size from core register size in gdbstub

The size of the FPU registers is dictated by the 'f' and 'd' features, not the core processor register size. Processors with the 'd' feature have 64-bit FPU registers. Processors without the 'd' feature but with the 'f' feature have 32-bit FPU registers.

---
 configure              |  4 ++--
 target/riscv/gdbstub.c | 18 +++++++++---------
 2 files changed, 11 insertions(+), 11 deletions(-)
configure +2 -2
index a72a5def57..c21bff8d10 100755
@@ -7709,13 +7709,13 @@ case "$target_name" in
     TARGET_BASE_ARCH=riscv
     TARGET_ABI_DIR=riscv
     mttcg=yes
-    gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-32bit-csr.xml riscv-32bit-virtual.xml"
+    gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-64bit-fpu.xml riscv-32bit-csr.xml riscv-32bit-virtual.xml"
   ;;
   riscv64)
     TARGET_BASE_ARCH=riscv
     TARGET_ABI_DIR=riscv
     mttcg=yes
-    gdb_xml_files="riscv-64bit-cpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml riscv-64bit-virtual.xml"
+    gdb_xml_files="riscv-64bit-cpu.xml riscv-32bit-fpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml riscv-64bit-virtual.xml"
   ;;
   sh4|sh4eb)
     TARGET_ARCH=sh4
target/riscv/gdbstub.c +9 -9
index 1a7947e019..c1803a5916 100644
@@ -303,7 +303,10 @@ int riscv_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
 static int riscv_gdb_get_fpu(CPURISCVState *env, uint8_t *mem_buf, int n)
 {
     if (n < 32) {
-        return gdb_get_reg64(mem_buf, env->fpr[n]);
+        if (env->misa & RVD)
+            return gdb_get_reg64(mem_buf, env->fpr[n]);
+        if (env->misa & RVF)
+            return gdb_get_reg32(mem_buf, env->fpr[n]);
     /* there is hole between ft11 and fflags in fpu.xml */
     } else if (n < 36 && n > 32) {
         target_ulong val = 0;
@@ -403,23 +406,20 @@ void riscv_cpu_register_gdb_regs_for_features(CPUState *cs)
 {
     RISCVCPU *cpu = RISCV_CPU(cs);
     CPURISCVState *env = &cpu->env;
-#if defined(TARGET_RISCV32)
-    if (env->misa & RVF) {
+    if (env->misa & RVD) {
+        gdb_register_coprocessor(cs, riscv_gdb_get_fpu, riscv_gdb_set_fpu,
+                                 36, "riscv-64bit-fpu.xml", 0);
+    } else if (env->misa & RVF) {
         gdb_register_coprocessor(cs, riscv_gdb_get_fpu, riscv_gdb_set_fpu,
                                  36, "riscv-32bit-fpu.xml", 0);
     }
-
+#if defined(TARGET_RISCV32)
     gdb_register_coprocessor(cs, riscv_gdb_get_csr, riscv_gdb_set_csr,
                              240, "riscv-32bit-csr.xml", 0);
 
     gdb_register_coprocessor(cs, riscv_gdb_get_virtual, riscv_gdb_set_virtual,
                              1, "riscv-32bit-virtual.xml", 0);
 #elif defined(TARGET_RISCV64)
-    if (env->misa & RVF) {
-        gdb_register_coprocessor(cs, riscv_gdb_get_fpu, riscv_gdb_set_fpu,
-                                 36, "riscv-64bit-fpu.xml", 0);
-    }
-
     gdb_register_coprocessor(cs, riscv_gdb_get_csr, riscv_gdb_set_csr,
                              240, "riscv-64bit-csr.xml", 0);
 
Signature · 1 line
2.25.0
#1 lore raw
Patchew URL: https://patchew.org/QEMU/[email protected]/

Patchew URL: https://patchew.org/QEMU/[email protected]/

Hi,

This series seems to have some coding style problems. See output below for more information:

Type: series
Message-id: [email protected]
Subject: [PATCH] riscv: Separate FPU register size from core register size in gdbstub

=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===

Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu
* [new tag] patchew/[email protected] -> patchew/[email protected]
Switched to a new branch 'test'
f8704a8 riscv: Separate FPU register size from core register size in gdbstub

=== OUTPUT BEGIN ===
ERROR: braces {} are necessary for all arms of this statement #44: FILE: target/riscv/gdbstub.c:306:
+ if (env->misa & RVD)
[...]

total: 1 errors, 0 warnings, 54 lines checked

Commit f8704a85f17a (riscv: Separate FPU register size from core register size in gdbstub) has style problems, please review. If any of these errors are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===

Test command exited with code: 1

The full log is available at
http://patchew.org/logs/[email protected]/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]

Reviewed-by on v1 1/1
#2 lore raw
In reply to Keith Packard via
Quoted 37 lines · Keith Packard via

The size of the FPU registers is dictated by the 'f' and 'd' features, not the core processor register size. Processors with the 'd' feature have 64-bit FPU registers. Processors without the 'd' feature but with the 'f' feature have 32-bit FPU registers.

---
 configure              |  4 ++--
 target/riscv/gdbstub.c | 18 +++++++++---------
 2 files changed, 11 insertions(+), 11 deletions(-)
configure +2 -2
index a72a5def57..c21bff8d10 100755
@@ -7709,13 +7709,13 @@ case "$target_name" in
     TARGET_BASE_ARCH=riscv
     TARGET_ABI_DIR=riscv
     mttcg=yes
-    gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-32bit-csr.xml riscv-32bit-virtual.xml"
+    gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-64bit-fpu.xml riscv-32bit-csr.xml riscv-32bit-virtual.xml"
   ;;
   riscv64)
     TARGET_BASE_ARCH=riscv
     TARGET_ABI_DIR=riscv
     mttcg=yes
-    gdb_xml_files="riscv-64bit-cpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml riscv-64bit-virtual.xml"
+    gdb_xml_files="riscv-64bit-cpu.xml riscv-32bit-fpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml riscv-64bit-virtual.xml"
   ;;
   sh4|sh4eb)
     TARGET_ARCH=sh4
target/riscv/gdbstub.c +0 -0
index 1a7947e019..c1803a5916 100644

target/riscv/gdbstub.c int riscv_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n) · line 309

Quoted 8 lines
target/riscv/gdbstub.c +4 -1
@@ -303,7 +303,10 @@ int riscv_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
 static int riscv_gdb_get_fpu(CPURISCVState *env, uint8_t *mem_buf, int n)
 {
     if (n < 32) {
-        return gdb_get_reg64(mem_buf, env->fpr[n]);
+        if (env->misa & RVD)
+            return gdb_get_reg64(mem_buf, env->fpr[n]);
+        if (env->misa & RVF)
+            return gdb_get_reg32(mem_buf, env->fpr[n]);

You need brackets around all if statements, besides that:

Alistair

Quoted 36 lines
target/riscv/gdbstub.c +5 -9
     /* there is hole between ft11 and fflags in fpu.xml */
     } else if (n < 36 && n > 32) {
         target_ulong val = 0;
@@ -403,23 +406,20 @@ void riscv_cpu_register_gdb_regs_for_features(CPUState *cs)
 {
     RISCVCPU *cpu = RISCV_CPU(cs);
     CPURISCVState *env = &cpu->env;
-#if defined(TARGET_RISCV32)
-    if (env->misa & RVF) {
+    if (env->misa & RVD) {
+        gdb_register_coprocessor(cs, riscv_gdb_get_fpu, riscv_gdb_set_fpu,
+                                 36, "riscv-64bit-fpu.xml", 0);
+    } else if (env->misa & RVF) {
         gdb_register_coprocessor(cs, riscv_gdb_get_fpu, riscv_gdb_set_fpu,
                                  36, "riscv-32bit-fpu.xml", 0);
     }
-
+#if defined(TARGET_RISCV32)
     gdb_register_coprocessor(cs, riscv_gdb_get_csr, riscv_gdb_set_csr,
                              240, "riscv-32bit-csr.xml", 0);
 
     gdb_register_coprocessor(cs, riscv_gdb_get_virtual, riscv_gdb_set_virtual,
                              1, "riscv-32bit-virtual.xml", 0);
 #elif defined(TARGET_RISCV64)
-    if (env->misa & RVF) {
-        gdb_register_coprocessor(cs, riscv_gdb_get_fpu, riscv_gdb_set_fpu,
-                                 36, "riscv-64bit-fpu.xml", 0);
-    }
-
     gdb_register_coprocessor(cs, riscv_gdb_get_csr, riscv_gdb_set_csr,
                              240, "riscv-64bit-csr.xml", 0);
 
--

2.25.0

#3 lore raw
Quoted 1 line · Alistair Francis

You need brackets around all if statements, besides that:

Sorry for the noise; I caught that and sent another version of this patch.

Quoted 1 line

Thanks for your review!

Signature · 1 line
-keith
#4 lore raw
In reply to Keith Packard via
Patchew URL: https://patchew.org/QEMU/[email protected]/

Patchew URL: https://patchew.org/QEMU/[email protected]/

Hi,

This series seems to have some coding style problems. See output below for more information:

Type: series
Message-id: [email protected]
Subject: [PATCH] riscv: Separate FPU register size from core register size in gdbstub

=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram
./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===

Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384
From https://github.com/patchew-project/qemu

 - [tag update]      patchew/[email protected] -> patchew/[email protected]
 - [tag update]      patchew/[email protected] -> patchew/[email protected]
 * [new tag]         patchew/[email protected] -> patchew/[email protected]
 * [new tag]         patchew/[email protected] -> patchew/[email protected]

Switched to a new branch 'test'
a2c277b riscv: Separate FPU register size from core register size in gdbstub

=== OUTPUT BEGIN ===
ERROR: braces {} are necessary for all arms of this statement #45: FILE: target/riscv/gdbstub.c:306:
+ if (env->misa & RVD)
[...]

total: 1 errors, 0 warnings, 54 lines checked

Commit a2c277b8eb39 (riscv: Separate FPU register size from core register size in gdbstub) has style problems, please review. If any of these errors are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
=== OUTPUT END ===

Test command exited with code: 1

The full log is available at
http://patchew.org/logs/[email protected]/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]