rtptools: needs RPC support
PATCH 1/1 rtptools: needs RPC support
rtptools needs a toolchain with RPC support, otherwise it will fail with an error message like this one:
host2ip.c:13:38: fatal error: rpcsvc/ypclnt.h: No such file or directory
#include <rpcsvc/ypclnt.h> /* YP */
--- package/rtptools/Config.in | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)
package/rtptools/Config.in +4 -0
@@ -1,5 +1,9 @@ +comment "rtptools needs a toolchain w/ RPC" + depends on !BR2_TOOLCHAIN_HAS_NATIVE_RPC + config BR2_PACKAGE_RTPTOOLS bool "rtptools" + depends on BR2_TOOLCHAIN_HAS_NATIVE_RPC help The rtptools distribution consists of a number of small applications that can be used for processing RTP data.
Signature · 1 line
1.7.1
PATCH 1/1 rtptools: needs RPC support
Dear Vicente Olivert Riera,
Quoted 7 lines · Vicente Olivert Riera
rtptools needs a toolchain with RPC support, otherwise it will fail with an error message like this one:
host2ip.c:13:38: fatal error:
rpcsvc/ypclnt.h: No such file or directory
#include <rpcsvc/ypclnt.h> /* YP */Signed-off-by Vicente Olivert Riera <[email protected]>
I'm surprised we have not seen autobuilder failures. Or did you forget to include a reference to an autobuilder error?
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/1 rtptools: needs RPC support
Dear Thomas Petazzoni,
Quoted 6 lines · Thomas Petazzoni
Dear Vicente Olivert Riera,
Quoted 3 lines · Vicente Olivert Riera
rtptools needs a toolchain with RPC support, otherwise it will fail with an error message like this one:
Quoted 7 lines
Quoted 4 lines
host2ip.c:13:38: fatal error:
rpcsvc/ypclnt.h: No such file or directory
#include <rpcsvc/ypclnt.h> /* YP */Signed-off-by Vicente Olivert Riera <[email protected]>I'm surprised we have not seen autobuilder failures. Or did you forget to include a reference to an autobuilder error?
No, I didn't forget that. I have catch this issue with one local autobuilder I have. If you wonder why I have a local autobuilder instead of submitting the results to the ML, it's because that autobuilder uses toolchains that are not yet included in our Buildroot tree.
Regards,
Vincent.
Quoted 5 lines
Thanks!
Thomas
PATCH 1/1 rtptools: needs RPC support
Hello,
Quoted 7 lines · Vicente Olivert Riera
Quoted 2 lines
I'm surprised we have not seen autobuilder failures. Or did you forget to include a reference to an autobuilder error?
No, I didn't forget that. I have catch this issue with one local autobuilder I have. If you wonder why I have a local autobuilder instead of submitting the results to the ML, it's because that autobuilder uses toolchains that are not yet included in our Buildroot tree.
That's perfectly OK. However, I wonder why we haven't seen this problem with toolchains already tested in the autobuilders. rtptools does not have any other dependencies, and we have a "basic" toolchain with no special options enabled.
Also, I think your patch should instead be:
select BR2_PACKAGE_LIBTIRPC if !BR2_TOOLCHAIN_HAS_NATIVE_RPC
and add libtirpc to the dependencies.
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
PATCH 1/1 rtptools: needs RPC support
Hi Thomas,
Quoted 12 lines · Thomas Petazzoni
Hello,
Quoted 7 lines · Vicente Olivert Riera
Quoted 2 lines
I'm surprised we have not seen autobuilder failures. Or did you forget to include a reference to an autobuilder error?
No, I didn't forget that. I have catch this issue with one local autobuilder I have. If you wonder why I have a local autobuilder instead of submitting the results to the ML, it's because that autobuilder uses toolchains that are not yet included in our Buildroot tree.
Quoted 8 lines
That's perfectly OK. However, I wonder why we haven't seen this problem with toolchains already tested in the autobuilders. rtptools does not have any other dependencies, and we have a "basic" toolchain with no special options enabled.
Also, I think your patch should instead be:
select
BR2_PACKAGE_LIBTIRPCif !BR2_TOOLCHAIN_HAS_NATIVE_RPC
I already tried that and it didn't fix the problem. Also added to the .mk file the following:
ifeq ($(BR2_TOOLCHAIN_HAS_NATIVE_RPC),y)RTPTOOLS_DEPENDENCIES += libtirpc
endif
After checking that libtirpc was installed, then I ran this command:
find output/staging/ -type f -name "ypclnt.h"
And that file doesn't exist either, so libtirpc can't fix the problem.
Regards,
Vincent.
Quoted 4 lines
and add libtirpc to the dependencies.
Thomas
PATCH 1/1 rtptools: needs RPC support
Hi again Thomas,
Quoted 20 lines · Vicente Olivert Riera
Hi Thomas,
Quoted 17 lines · Thomas Petazzoni
Hello,
Quoted 7 lines · Vicente Olivert Riera
Quoted 2 lines
I'm surprised we have not seen autobuilder failures. Or did you forget to include a reference to an autobuilder error?
No, I didn't forget that. I have catch this issue with one local autobuilder I have. If you wonder why I have a local autobuilder instead of submitting the results to the ML, it's because that autobuilder uses toolchains that are not yet included in our Buildroot tree.
That's perfectly OK. However, I wonder why we haven't seen this problem with toolchains already tested in the autobuilders. rtptools does not have any other dependencies, and we have a "basic" toolchain with no special options enabled.
Quoted 8 lines
Quoted 3 lines
Also, I think your patch should instead be:
select
BR2_PACKAGE_LIBTIRPCif !BR2_TOOLCHAIN_HAS_NATIVE_RPCI already tried that and it didn't fix the problem. Also added to the .mk file the following:
ifeq ($(BR2_TOOLCHAIN_HAS_NATIVE_RPC),y)
Sorry, I didn't put the "y" when I tried it. It was just a type while writing the email.
Regards,
Vincent.
Quoted 22 lines
RTPTOOLS_DEPENDENCIES+= libtirpc
endifAfter checking that libtirpc was installed, then I ran this command:
find output/staging/ -type f -name "
ypclnt.h"And that file doesn't exist either, so libtirpc can't fix the problem.
Regards,
Vincent.
Quoted 4 lines
and add libtirpc to the dependencies.
Thomas
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
PATCH 1/1 rtptools: needs RPC support
In reply to Vicente Olivert RieraQuoted 7 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Vicente" == Vicente Olivert Riera <[email protected]> writes:
rtptools needs a toolchain with RPC support, otherwise it will fail with an error message like this one:
host2ip.c:13:38: fatal error:
rpcsvc/ypclnt.h: No such file or directory
#include <rpcsvc/ypclnt.h> /* YP */
Hmm, are you sure?
I just did a test build here with a toolchain without RPC support:
find output/staging/usr -name ypclnt.h
But it still built. I do see that rpctools itself contain that header file:
find output/build/rtptools-1.20 -name ypclnt.h output/build/rtptools-1.20/nt/include/ypclnt.h output/build/rtptools-1.20/nt/include/rpcsvc/ypclnt.h
Signature · 1 line
Bye, Peter Korsgaard
PATCH 1/1 rtptools: needs RPC support
Dear Peter Korsgaard,
Quoted 12 lines · Peter Korsgaard
Quoted 7 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Vicente" == Vicente Olivert Riera <[email protected]> writes:
rtptools needs a toolchain with RPC support, otherwise it will fail with an error message like this one:
host2ip.c:13:38: fatal error:
rpcsvc/ypclnt.h: No such file or directory
#include <rpcsvc/ypclnt.h> /* YP */Hmm, are you sure?
I just did a test build here with a toolchain without RPC support:
Quoted 9 lines
find output/staging/usr -name
ypclnt.hBut it still built. I do see that rpctools itself contain that header file:
find output/build/rtptools-1.20 -name
ypclnt.houtput/build/rtptools-1.20/nt/include/ypclnt.houtput/build/rtptools-1.20/nt/include/rpcsvc/ypclnt.h
We were discussing about this in the IRC during this afternoon, and checked that it actually builds with toolchains without RPC. I highlighted the issue using a toolchain which is a bit special. I then marked my patch as deferred few hours ago, but now I'm going to mark it as rejected. I will keep investigating about this because is very weird that the rtptools itself has the headers but my toolchain is not able to find them.
Regards,
Vincent.