Skip to contentSkip to conversation

mac80211: Drop the packets whose source or destination mac address is empty

PATCH Superseded Ming Chen 3 participants 3 messages Nov 15, 2019 – Nov 16, 2019 mac80211

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Ming Chen

author
#0 lore raw

PATCH v3 1/1 mac80211: Drop the packets whose source or destination mac address is empty

We occasionally found ath9k could receive some packets from Linux IP stack with empty source and destination mac address,which will result in the driver cannot find the station node in TX complete. And thus, the driver will complete this buffer but without updating the block ack window.

To fix this issue, we should drop this kind of error packet before it goes into the driver.

---

v3:
-Fix s-o-b location

v2:
-According to review feedback, use the is_zero_ether_addr to check if the mac address is empty.

---
 net/mac80211/tx.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
net/mac80211/tx.c +12 -0
index db38be1b75fa..b18745a3f6b0 100644
@@ -2489,6 +2489,13 @@ static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata,
 	if (IS_ERR(sta))
 		sta = NULL;
 
+	/* drop this skb when source mac or destination mac is empty */
+	if (is_zero_ether_addr(skb->data) ||
+	    is_zero_ether_addr(skb->data + ETH_ALEN)) {
+		ret = -ENOTCONN;
+		goto free;
+	}
+
 #ifdef CONFIG_MAC80211_DEBUGFS
 	if (local->force_tx_status)
 		info_flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
@@ -3435,6 +3442,11 @@ static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata,
 	if (skb->sk && skb_shinfo(skb)->tx_flags & SKBTX_WIFI_STATUS)
 		return false;
 
+	/* drop this skb when source mac or destination mac is empty */
+	if (is_zero_ether_addr(skb->data) ||
+	    is_zero_ether_addr(skb->data + ETH_ALEN))
+		return false;
+
 	if (hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) {
 		tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK;
 		tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]);
Signature · 1 line
2.17.1
#1 lore raw
Quoted 2 lines · Ming Chen

We occasionally found ath9k could receive some packets from Linux IP stack with empty source and destination mac address,

How does that happen?

Quoted 3 lines

which will result in the driver cannot find the station node in TX complete. And thus, the driver will complete this buffer but without updating the block ack window.

If it can't find the station, how is the packet transmitted (and affecting the BA window) in the first place?

-Toke

#2 lore raw

Hello Toke,

Thanks for the review.

Please see my inline comments.

Ming

Quoted 10 lines

-----Original Message-----
From: Toke Høiland-Jørgensen <[email protected]>
Sent: Friday, November 15, 2019 3:08 AM
To: Ming Chen <[email protected]>; Johannes Berg <[email protected]>
Cc: [email protected]; Ming Chen <[email protected]>
Subject: Re: [PATCH v3] mac80211: Drop the packets whose source or destination mac address is empty

Quoted 6 lines
Quoted 2 lines · Ming Chen

We occasionally found ath9k could receive some packets from Linux IP stack with empty source and destination mac address,

How does that happen?

[Ming Chen] To be honest, I not quite sure how it happen. When the radio works as a wireless client,
I cloud occasionally reproduce this issue by disabling DHCP and configure a static IP for wireless client, and also try to ping to its gateway without break. My kernel version is 4.14.

Quoted 7 lines
Quoted 4 lines

which will result in the driver cannot find the station node in TX complete. And thus, the driver will complete this buffer but without updating the block ack window.

If it can't find the station, how is the packet transmitted (and affecting the BA window) in the first place?

[Ming Chen] Please see the new changelog of version 4.

Quoted 2 lines

-Toke