kconfig: Add PCIe devices to s390x machines
PATCH v3 1/1 kconfig: Add PCIe devices to s390x machines
It is useful to extend the number of available PCI devices to KVM guests for passthrough scenarios and also to expose these models to a different (big endian) architecture. Include models for Intel Ethernet adapters and one USB controller, which all support MSI-X. Devices only supporting INTx won't work on s390x.
---
v3: PCI -> PCI_EXPRESS
v2: select -> imply
hw/s390x/Kconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
hw/s390x/Kconfig +4 -1
@@ -5,8 +5,11 @@ config S390_CCW_VIRTIO imply VFIO_AP imply VFIO_CCW imply WDT_DIAG288 - select PCI + select PCI_EXPRESS select S390_FLIC select SCLPCONSOLE select VIRTIO_CCW select MSI_NONBROKEN + imply E1000E_PCI_EXPRESS + imply IGB_PCI_EXPRESS + imply USB_XHCI_PCI
Signature · 1 line
2.41.0
Quoted 7 lines · Cédric Le Goater
It is useful to extend the number of available PCI devices to KVM guests for passthrough scenarios and also to expose these models to a different (big endian) architecture. Include models for Intel Ethernet adapters and one USB controller, which all support MSI-X. Devices only supporting INTx won't work on s390x.
Signed-off-by Cédric Le Goater <[email protected]>
Quoted 25 lines
---
v3: PCI ->
PCI_EXPRESS
v2: select -> implyhw/s390x/Kconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)hw/s390x/Kconfig +4
-1@@ -5,8 +5,11 @@ config S390_CCW_VIRTIO imply VFIO_AP imply VFIO_CCW imply WDT_DIAG288 - select PCI + select PCI_EXPRESS select S390_FLIC select SCLPCONSOLE select VIRTIO_CCW select MSI_NONBROKEN + imply E1000E_PCI_EXPRESS + imply IGB_PCI_EXPRESS + imply USB_XHCI_PCI
Quoted 6 lines · Cédric Le Goater
It is useful to extend the number of available PCI devices to KVM guests for passthrough scenarios and also to expose these models to a different (big endian) architecture. Include models for Intel Ethernet adapters and one USB controller, which all support MSI-X. Devices only supporting INTx won't work on s390x.
Quoted 8 lines
Signed-off-by Cédric Le Goater <[email protected]>---
v3: PCI ->
PCI_EXPRESS
v2: select -> implyhw/s390x/Kconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
hw/s390x/Kconfig config S390_CCW_VIRTIO · line 15
Quoted 3 lines · Cédric Le Goater
hw/s390x/Kconfig +3
-0+ imply E1000E_PCI_EXPRESS + imply IGB_PCI_EXPRESS + imply USB_XHCI_PCI
"imply" should only be used whenever the device can be created with the front-end/back-end combo command line options, and as far as I can see this is not the case here.
You could set CONFIG_PCIE_DEVICES=y in s390-softmmu.mak and make these three devices "default y if PCI_DEVICES || PCIE_DEVICES".
Paolo
Quoted 8 lines · Paolo Bonzini
Quoted 3 lines · Cédric Le Goater
+ imply
E1000E_PCI_EXPRESS
+ implyIGB_PCI_EXPRESS
+ implyUSB_XHCI_PCI"imply" should only be used whenever the device can be created with the front-end/back-end combo command line options, and as far as I can see this is not the case here.
You could set
CONFIG_PCIE_DEVICES=yin s390-softmmu.mak and make these three devices "default y ifPCI_DEVICES||PCIE_DEVICES".
"default y if PCIE_DEVICES" for *_PCI_EXPRESS.