target/s390x: Extend qemu CPACF support
Subsystems (3)
v12 cover target/s390x: Extend qemu CPACF support
This patch series extends the s390 qemu CPACF support to be able to run a subset of the CPACF instruction cross platform. There have been requests on the kernel crypto mailing list about a way to test s390 specific crypto implementations. For example a way to test s390 CPACF exploitation code like the s390_aes.ko kernel module.
So here now is a set of patches verified on x86 and s390 which over (slow but working) support for a subset of the subfunctions of some of the CPACF instructions.
Test: There are some very basic tests included with this patch series suitable for some CI run. Better test coverage can be done by running a full blown Linux and use for example the in-kernel crypto modules. The 'usual' in-kernel crpyto modules will be automatically loaded which run a bunch of test cases. So there is now support for these kernel modules:
* sha256_s390x (autoloaded, sha256)
* sha512_s390x (autoloaded, sha512)
* aes_s390x (autoloaded, clear key aes ecb, cbc, ctr, xts)
* pkey_pckmo (autoloaded, derive AES protected key from clear key)
* paes_s390x (not autoloaded, protected key aes ecb, cbc, ctr, xts) All these modules run selftests if configured by the kernel (which is enabled by default). Failures are reported via syslog. Additionally the aes testcases from libica can be run either inside such an qemu environment or with a static build executed with the qemu tcg application qemu-s390x --cpu max <static-build-libica-test>.
Changelog:
v1: Initial version with
- Related code restructured
- Support KIMD SHA512 and thus SHA256
- Support KMC AES-128, AES-192 and AES-256 and thus have basic AES support (ECB mode) enabled.
- Support PCC Compute-XTS-Parameter-AES-128 and Compute-XTS-Parameter-AES-256 but only for block sequence number
0. This is a requirement for the next step:
- Support KM XTS-AES-128 and KM XTS-AES-256. Together with the minimal PCC support this enables AES-XTS CPACF acceleration.
v2: - Basic PCKMO support to be able to 'derive' an AES protected key
from clear key. See header details.
- Support protected key AES-ECB.
- Support protected key AES-CBC.
- Minimal protected key AES-XTS support for CPACF PCC.
- Support protected key AES-XTS.
- Support AES-CTR.
- Support protected key AES-CTR.
v3: - Reordered patches as suggested by Finn.
- One small bug fix in CPACF_aes.c related to address translation.
v4: - Rename of the parameters based on feedback from Janosch to
make clear these are registers or ptrs to registers. Added Tested by from Holger. Fixed typo "face" -> "fake".
v5: - Add documentation file docs/system/s390x/cpacf.rst which
describes the state of the CPACF instructions and which functions are covered when this series is applied. First version sent to public mailing list qemu-s390x.
v6: - Rebase/rework to build on current qemu head.
- Add docs/system/s390x/cpacf.rst to target-s390x.rst
- New file crypto/aes-helpers.c with some simple functions to support AES modes CBC, CTR and XTS.
- Slight rewrite of the s390x CPACF implementations to use these generic AES mode implementations.
v7: - Update on docs/system/s390x/cpacf.rst to mention
the zArchicteture Principles of Operation document which describes all these CPACF instructions.
v8: - Add a fix which deals with incorrect address handling
in the sha512 implementation related to fetch and push data from/to memory.
- Slight rework around the capcf function implementation and exception generation.
- Added some more details to the new cpacf.rst file.
- Fixed some typos and added some suggestions from Finn.
- Fixed cc handling on return of PCKMO (must not update cc).
Missing: simple test cases to verify that the implemented and not implemented cpacf functions and subfunctions work as expected. But see the statement about tests at the header.
v9: - Add simple tests for all the implemented CPACF instructions but
pckmo (which is a privileged instruction).
- Reworked the Fix for wrong address to call the wrap function inline; rephrased commit header.
- Improve the header file cpacf.h to hold defines for all the cpacf instruction functions and use them in the code.
- one new commit comprising the base protected key support with exposing the xor pattern and wkvp and en/decrypt key functions via cpacf.h. So the testcases can use this header file.
- one new commit which reworks the fetch memory and store memory from and to guest (suggested by Ilya Leoshkevich).
v10: - Fixed v9 patch 3 (cpacf_sha512.c was missing)
Please note that patch #10 "target/s390x: Base support for cpacf protected keys" produces a build warning ("unused function"). As by default the qemu build has warnings=errors enabled, this one patch does not build on it's own. If this is not acceptable, the hunk introducing the two functions may be moved to the next commit; another solution would be to merge with patch #11.
v11: Fixed nearly all checkpatch findings - only the warnings about
Maintainers may need update is still there.
v12: - Very first patch is integrated in master and thus removed from
this series.
- New header file include/crypto/aes-headers.h as suggested by Daniel. Moved the patch which introduces the aes helpers before the actual AES cpacf implementations and reworked all the code to use these helpers.
- Merged together "Base support for cpacf protected keys" and "Support pckmo encrypt AES subfunctions" to fix the broken build caused by unused functions.
- Merged the changes from patch "Improve fetch and store mem from and to guest" directly into the code where it is introduced.
Harald Freudenberger (17):
target/s390x: Rework s390 cpacf implementations target/s390x: Move cpacf sha512 code into a new file target/s390x: Support cpacf sha256
crypto: Add aes-helpers file to support some AES modes target/s390x: Support AES ECB for cpacf km instruction target/s390x: Support AES CBC for cpacf kmc instruction target/s390x: Support AES CTR for cpacf kmctr instruction target/s390x: Minimal AES XTS support for cpacf pcc instruction target/s390x: Support AES XTS for cpacf km instruction target/s390x: Base support for cpacf protected keys and pckmo target/s390x: Support protected key AES ECB for cpacf km instruction target/s390x: Support protected key AES CBC for cpacf kmc instruction target/s390x: Support protected key AES CTR for cpacf kmctr
instruction
target/s390x: Minimal protected key AES XTS support for cpacf pcc
instruction
target/s390x: Support protected key AES XTS for cpacf km instruction docs/s390: Document CPACF instructions support tests/tcg/s390x: Add tests for CPACF instructions
crypto/aes-helpers.c | 106 ++++ crypto/meson.build | 1 + docs/system/s390x/cpacf.rst | 146 +++++ docs/system/target-s390x.rst | 1 + include/crypto/aes-helpers.h | 116 ++++ target/s390x/gen-features.c | 31 ++ target/s390x/tcg/cpacf.h | 312 +++++++++++ target/s390x/tcg/cpacf_aes.c | 903 +++++++++++++++++++++++++++++++ target/s390x/tcg/cpacf_sha256.c | 227 ++++++++ target/s390x/tcg/cpacf_sha512.c | 241 +++++++++ target/s390x/tcg/crypto_helper.c | 422 +++++++-------- target/s390x/tcg/insn-data.h.inc | 1 + target/s390x/tcg/meson.build | 3 + target/s390x/tcg/translate.c | 11 +- tests/tcg/s390x/Makefile.target | 9 + tests/tcg/s390x/cpacf-kdsa.c | 58 ++ tests/tcg/s390x/cpacf-kimd.c | 166 ++++++ tests/tcg/s390x/cpacf-klmd.c | 206 +++++++ tests/tcg/s390x/cpacf-km.c | 590 ++++++++++++++++++++ tests/tcg/s390x/cpacf-kmac.c | 58 ++ tests/tcg/s390x/cpacf-kmc.c | 351 ++++++++++++ tests/tcg/s390x/cpacf-kmctr.c | 360 ++++++++++++ tests/tcg/s390x/cpacf-pcc.c | 245 +++++++++ tests/tcg/s390x/cpacf-prno.c | 131 +++++ tests/tcg/s390x/cpacf.h | 571 +++++++++++++++++++ 25 files changed, 5053 insertions(+), 213 deletions(-) create mode 100644 crypto/aes-helpers.c create mode 100644 docs/system/s390x/cpacf.rst create mode 100644 include/crypto/aes-helpers.h create mode 100644 target/s390x/tcg/cpacf.h create mode 100644 target/s390x/tcg/cpacf_aes.c create mode 100644 target/s390x/tcg/cpacf_sha256.c create mode 100644 target/s390x/tcg/cpacf_sha512.c create mode 100644 tests/tcg/s390x/cpacf-kdsa.c create mode 100644 tests/tcg/s390x/cpacf-kimd.c create mode 100644 tests/tcg/s390x/cpacf-klmd.c create mode 100644 tests/tcg/s390x/cpacf-km.c create mode 100644 tests/tcg/s390x/cpacf-kmac.c create mode 100644 tests/tcg/s390x/cpacf-kmc.c create mode 100644 tests/tcg/s390x/cpacf-kmctr.c create mode 100644 tests/tcg/s390x/cpacf-pcc.c create mode 100644 tests/tcg/s390x/cpacf-prno.c create mode 100644 tests/tcg/s390x/cpacf.h
base-commit: f893c46c3931b3684d235d221bf8b7844ddbf1d7 --
2.43.0
PATCH v12 1/17 target/s390x: Rework s390 cpacf implementations
Fix missing parts for MSA 9 kdsa and rework the cpacf handling code so that further extensions can be made in a clean and structured way.
Introduce a new header file to hold defines, structs and function prototypes around s390 cpacf. Use the cpcaf function defines in the existing code.
--- target/s390x/tcg/cpacf.h | 226 +++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 90 ++++++++++-- target/s390x/tcg/insn-data.h.inc | 1 + target/s390x/tcg/translate.c | 2 + 4 files changed, 306 insertions(+), 13 deletions(-) create mode 100644 target/s390x/tcg/cpacf.h
target/s390x/tcg/cpacf.h new file +226 -0
@@ -0,0 +1,226 @@ +/* +* SPDX-License-Identifier: GPL-2.0-or-later +* +* s390x cpacf +* +*/ + +#ifndef S390X_CPACF_H +#define S390X_CPACF_H + +/* +* Function codes for the KM instruction +*/ +#define CPACF_KM_QUERY 0x00 +#define CPACF_KM_DEA 0x01 +#define CPACF_KM_TDEA_128 0x02 +#define CPACF_KM_TDEA_192 0x03 +#define CPACF_KM_AES_128 0x12 +#define CPACF_KM_AES_192 0x13 +#define CPACF_KM_AES_256 0x14 +#define CPACF_KM_PAES_128 0x1a +#define CPACF_KM_PAES_192 0x1b +#define CPACF_KM_PAES_256 0x1c +#define CPACF_KM_XTS_128 0x32 +#define CPACF_KM_XTS_256 0x34 +#define CPACF_KM_PXTS_128 0x3a +#define CPACF_KM_PXTS_256 0x3c +#define CPACF_KM_FULL_XTS_128 0x52 +#define CPACF_KM_FULL_XTS_256 0x54 +#define CPACF_KM_FULL_PXTS_128 0x5a +#define CPACF_KM_FULL_PXTS_256 0x5c + +/* +* Function codes for the KMC instruction +*/ +#define CPACF_KMC_QUERY 0x00 +#define CPACF_KMC_DEA 0x01 +#define CPACF_KMC_TDEA_128 0x02 +#define CPACF_KMC_TDEA_192 0x03 +#define CPACF_KMC_AES_128 0x12 +#define CPACF_KMC_AES_192 0x13 +#define CPACF_KMC_AES_256 0x14 +#define CPACF_KMC_PAES_128 0x1a +#define CPACF_KMC_PAES_192 0x1b +#define CPACF_KMC_PAES_256 0x1c +#define CPACF_KMC_PRNG 0x43 + +/* +* Function codes for the KMCTR instruction +*/ +#define CPACF_KMCTR_QUERY 0x00 +#define CPACF_KMCTR_DEA 0x01 +#define CPACF_KMCTR_TDEA_128 0x02 +#define CPACF_KMCTR_TDEA_192 0x03 +#define CPACF_KMCTR_AES_128 0x12 +#define CPACF_KMCTR_AES_192 0x13 +#define CPACF_KMCTR_AES_256 0x14 +#define CPACF_KMCTR_PAES_128 0x1a +#define CPACF_KMCTR_PAES_192 0x1b +#define CPACF_KMCTR_PAES_256 0x1c + +/* +* Function codes for the KIMD instruction +*/ +#define CPACF_KIMD_QUERY 0x00 +#define CPACF_KIMD_SHA_1 0x01 +#define CPACF_KIMD_SHA_256 0x02 +#define CPACF_KIMD_SHA_512 0x03 +#define CPACF_KIMD_SHA3_224 0x20 +#define CPACF_KIMD_SHA3_256 0x21 +#define CPACF_KIMD_SHA3_384 0x22 +#define CPACF_KIMD_SHA3_512 0x23 +#define CPACF_KIMD_SHAKE_128 0x24 +#define CPACF_KIMD_SHAKE_256 0x25 +#define CPACF_KIMD_GHASH 0x41 + +/* +* Function codes for the KLMD instruction +*/ +#define CPACF_KLMD_QUERY 0x00 +#define CPACF_KLMD_SHA_1 0x01 +#define CPACF_KLMD_SHA_256 0x02 +#define CPACF_KLMD_SHA_512 0x03 +#define CPACF_KLMD_SHA3_224 0x20 +#define CPACF_KLMD_SHA3_256 0x21 +#define CPACF_KLMD_SHA3_384 0x22 +#define CPACF_KLMD_SHA3_512 0x23 +#define CPACF_KLMD_SHAKE_128 0x24 +#define CPACF_KLMD_SHAKE_256 0x25 + +/* +* function codes for the KMAC instruction +*/ +#define CPACF_KMAC_QUERY 0x00 +#define CPACF_KMAC_DEA 0x01 +#define CPACF_KMAC_TDEA_128 0x02 +#define CPACF_KMAC_TDEA_192 0x03 +#define CPACF_KMAC_AES_128 0x12 +#define CPACF_KMAC_AES_192 0x13 +#define CPACF_KMAC_AES_256 0x14 +#define CPACF_KMAC_PAES_128 0x1A +#define CPACF_KMAC_PAES_192 0x1B +#define CPACF_KMAC_PAES_256 0x1C +#define CPACF_KMAC_HMAC_SHA_224 0x70 +#define CPACF_KMAC_HMAC_SHA_256 0x71 +#define CPACF_KMAC_HMAC_SHA_384 0x72 +#define CPACF_KMAC_HMAC_SHA_512 0x73 +#define CPACF_KMAC_PHMAC_SHA_224 0x78 +#define CPACF_KMAC_PHMAC_SHA_256 0x79 +#define CPACF_KMAC_PHMAC_SHA_384 0x7a +#define CPACF_KMAC_PHMAC_SHA_512 0x7b + +/* +* Function codes for the PCKMO instruction +*/ +#define CPACF_PCKMO_QUERY 0x00 +#define CPACF_PCKMO_ENC_DES_KEY 0x01 +#define CPACF_PCKMO_ENC_TDES_128_KEY 0x02 +#define CPACF_PCKMO_ENC_TDES_192_KEY 0x03 +#define CPACF_PCKMO_ENC_AES_128_KEY 0x12 +#define CPACF_PCKMO_ENC_AES_192_KEY 0x13 +#define CPACF_PCKMO_ENC_AES_256_KEY 0x14 +#define CPACF_PCKMO_ENC_AES_XTS_128_DOUBLE_KEY 0x14 +#define CPACF_PCKMO_ENC_AES_XTS_256_DOUBLE_KEY 0x16 +#define CPACF_PCKMO_ENC_ECC_P256_KEY 0x20 +#define CPACF_PCKMO_ENC_ECC_P384_KEY 0x21 +#define CPACF_PCKMO_ENC_ECC_P521_KEY 0x22 +#define CPACF_PCKMO_ENC_ECC_ED25519_KEY 0x28 +#define CPACF_PCKMO_ENC_ECC_ED448_KEY 0x29 +#define CPACF_PCKMO_ENC_HMAC_512_KEY 0x76 +#define CPACF_PCKMO_ENC_HMAC_1024_KEY 0x7a + +/* +* Function codes for the PRNO instruction +*/ +#define CPACF_PRNO_QUERY 0x00 +#define CPACF_PRNO_SHA512_DRNG_GEN 0x03 +#define CPACF_PRNO_SHA512_DRNG_SEED 0x83 +#define CPACF_PRNO_TRNG_Q_R2C_RATIO 0x70 +#define CPACF_PRNO_TRNG 0x72 + +/* +* Function codes for the KMA instruction +*/ +#define CPACF_KMA_QUERY 0x00 +#define CPACF_KMA_GCM_AES_128 0x12 +#define CPACF_KMA_GCM_AES_192 0x13 +#define CPACF_KMA_GCM_AES_256 0x14 +#define CPACF_KMA_GCM_PAES_128 0x1A +#define CPACF_KMA_GCM_PAES_192 0x1B +#define CPACF_KMA_GCM_PAES_256 0x1C + +/* +* Function codes for the KMF instruction +*/ +#define CPACF_KMF_QUERY 0 +#define CPACF_KMF_DEA 1 +#define CPACF_KMF_TDEA_128 2 +#define CPACF_KMF_TDEA_192 3 +#define CPACF_KMF_AES_128 18 +#define CPACF_KMF_AES_192 19 +#define CPACF_KMF_AES_256 20 +#define CPACF_KMF_PAES_128 26 +#define CPACF_KMF_PAES_192 27 +#define CPACF_KMF_PAES_256 28 + +/* +* Function codes for the KMO instruction +*/ +#define CPACF_KMO_QUERY 0 +#define CPACF_KMO_DEA 1 +#define CPACF_KMO_TDEA_128 2 +#define CPACF_KMO_TDEA_192 3 +#define CPACF_KMO_AES_128 18 +#define CPACF_KMO_AES_192 19 +#define CPACF_KMO_AES_256 20 +#define CPACF_KMO_PAES_128 26 +#define CPACF_KMO_PAES_192 27 +#define CPACF_KMO_PAES_256 28 + +/* +* Function codes for the PCC instruction +*/ +#define CPACF_PCC_QUERY 0 +#define CPACF_PCC_CMAC_DEA 1 +#define CPACF_PCC_CMAC_TDEA_128 2 +#define CPACF_PCC_CMAC_TDEA_192 3 +#define CPACF_PCC_CMAC_AES_128 18 +#define CPACF_PCC_CMAC_AES_192 19 +#define CPACF_PCC_CMAC_AES_256 20 +#define CPACF_PCC_CMAC_PAES_128 26 +#define CPACF_PCC_CMAC_PAES_192 27 +#define CPACF_PCC_CMAC_PAES_256 28 +#define CPACF_PCC_XTS_AES_128 50 +#define CPACF_PCC_XTS_AES_256 52 +#define CPACF_PCC_XTS_PAES_128 58 +#define CPACF_PCC_XTS_PAES_256 60 +#define CPACF_PCC_SM_P256 64 +#define CPACF_PCC_SM_P384 65 +#define CPACF_PCC_SM_P521 66 +#define CPACF_PCC_SM_ED25519 72 +#define CPACF_PCC_SM_ED448 73 +#define CPACF_PCC_SM_X25519 80 +#define CPACF_PCC_SM_X448 81 + +/* +* Function codes for the KDSA instruction +*/ +#define CPACF_KDSA_QUERY 0 +#define CPACF_KDSA_VERIFY_P256 1 +#define CPACF_KDSA_VERIFY_P384 2 +#define CPACF_KDSA_VERIFY_P521 3 +#define CPACF_KDSA_SIGN_P256 9 +#define CPACF_KDSA_SIGN_P384 10 +#define CPACF_KDSA_SIGN_P521 11 +#define CPACF_KDSA_PSIGN_P256 17 +#define CPACF_KDSA_PSIGN_P384 18 +#define CPACF_KDSA_PSIGN_P521 19 +#define CPACF_KDSA_VERIFY_ED25519 32 +#define CPACF_KDSA_VERIFY_ED448 36 +#define CPACF_KDSA_SIGN_ED25519 40 +#define CPACF_KDSA_SIGN_ED448 44 +#define CPACF_KDSA_PSIGN_ED25519 48 +#define CPACF_KDSA_PSIGN_ED448 52 + +#endif /* S390X_CPACF_H */
target/s390x/tcg/crypto_helper.c +77 -13
127 lines not on this page · raw message
target/s390x/tcg/insn-data.h.inc +1 -0
@@ -1015,6 +1015,7 @@ D(0xb92e, KM, RRE, MSA, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_KM) D(0xb92f, KMC, RRE, MSA, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_KMC) D(0xb929, KMA, RRF_b, MSA8, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_KMA) + D(0xb93a, KDSA, RRE, MSA9, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_KDSA) E(0xb93c, PPNO, RRE, MSA5, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_PPNO, IF_IO) D(0xb93e, KIMD, RRE, MSA, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_KIMD) D(0xb93f, KLMD, RRE, MSA, 0, 0, 0, 0, msa, 0, S390_FEAT_TYPE_KLMD)
target/s390x/tcg/translate.c +2 -0
@@ -2592,6 +2592,7 @@ static DisasJumpType op_msa(DisasContext *s, DisasOps *o)/* FALL THROUGH */ case S390_FEAT_TYPE_PCKMO :case S390_FEAT_TYPE_PCC : +case S390_FEAT_TYPE_KDSA :break ;default :g_assert_not_reached ();
@@ -6046,6 +6047,7 @@ enum DisasInsnEnum {#define FAC_MSA4 S390_FEAT_MSA_EXT_4/* msa-extension-4 facility */ #define FAC_MSA5 S390_FEAT_MSA_EXT_5/* msa-extension-5 facility */ #define FAC_MSA8 S390_FEAT_MSA_EXT_8/* msa-extension-8 facility */ +#define FAC_MSA9 S390_FEAT_MSA_EXT_9/* msa-extension-9 facility */ #define FAC_ECT S390_FEAT_EXTRACT_CPU_TIME#define FAC_PCI S390_FEAT_ZPCI/* z/PCI facility */ #define FAC_AIS S390_FEAT_ADAPTER_INT_SUPPRESSION
Signature · 1 line
2.43.0
PATCH v12 2/17 target/s390x: Move cpacf sha512 code into a new file
In reply to Harald FreudenbergerMove the cpacf sha512 implementation into a new file cpacf_sha512.c. Add this new file to the build and use the cpacf.h header file storing function the prototypes.
--- target/s390x/tcg/cpacf.h | 5 + target/s390x/tcg/cpacf_sha512.c | 241 +++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 222 ---------------------------- target/s390x/tcg/meson.build | 1 + 4 files changed, 247 insertions(+), 222 deletions(-) create mode 100644 target/s390x/tcg/cpacf_sha512.c
target/s390x/tcg/cpacf.h +5 -0
@@ -223,4 +223,9 @@#define CPACF_KDSA_PSIGN_ED25519 48#define CPACF_KDSA_PSIGN_ED448 52 +/* from cpacf_sha512.c */ +int cpacf_sha512 (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *message_reg,uint64_t *len_reg, +uint32_t type); +#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_sha512.c new file +241 -0
241 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +0 -222
228 lines not on this page · raw message
target/s390x/tcg/meson.build +1 -0
@@ -5,6 +5,7 @@ s390x_ss.add(when: 'CONFIG_TCG', if_true: files( )) s390x_common_ss.add(when: 'CONFIG_TCG', if_true: files( 'cc_helper.c', + 'cpacf_sha512.c', 'crypto_helper.c', 'excp_helper.c', 'fpu_helper.c',
Signature · 1 line
2.43.0
PATCH v12 3/17 target/s390x: Support cpacf sha256
In reply to Harald FreudenbergerAdd a new file cpacf_sha256.c which implements sha256. Add support for the sha256 subfuction for CPACF kimd and klmd.
--- target/s390x/gen-features.c | 2 + target/s390x/tcg/cpacf.h | 5 + target/s390x/tcg/cpacf_sha256.c | 227 +++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 8 ++ target/s390x/tcg/meson.build | 1 + 5 files changed, 243 insertions(+) create mode 100644 target/s390x/tcg/cpacf_sha256.c
target/s390x/gen-features.c +2 -0
@@ -917,7 +917,9 @@ static uint16_t qemu_V7_1[] = {*/ static uint16_t qemu_MAX[] = {S390_FEAT_MSA_EXT_5 , +S390_FEAT_KIMD_SHA_256 ,S390_FEAT_KIMD_SHA_512 , +S390_FEAT_KLMD_SHA_256 ,S390_FEAT_KLMD_SHA_512 ,S390_FEAT_PRNO_TRNG , };
target/s390x/tcg/cpacf.h +5 -0
@@ -223,6 +223,11 @@#define CPACF_KDSA_PSIGN_ED25519 48#define CPACF_KDSA_PSIGN_ED448 52 +/* from cpacf_sha256.c */ +int cpacf_sha256 (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *message_reg,uint64_t *len_reg, +uint32_t type); +/* from cpacf_sha512.c */ int cpacf_sha512(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t param_addr, uint64_t *message_reg, uint64_t *len_reg,
target/s390x/tcg/cpacf_sha256.c new file +227 -0
227 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +8 -0
@@ -53,6 +53,10 @@ static int cpacf_kimd(CPUS390XState *env, const int mmu_idx, const uintptr_t ra,int rc =0 ;switch (fc) { +case CPACF_KIMD_SHA_256 : + rc =cpacf_sha256 (env, mmu_idx, ra, env->regs[1 ], &env->regs[r2], + &env->regs[r2 +1 ],S390_FEAT_TYPE_KIMD ); +break ;case CPACF_KIMD_SHA_512 : rc =cpacf_sha512 (env, mmu_idx, ra, env->regs[1 ], &env->regs[r2], &env->regs[r2 +1 ],S390_FEAT_TYPE_KIMD );
@@ -70,6 +74,10 @@ static int cpacf_klmd(CPUS390XState *env, const int mmu_idx, const uintptr_t ra,int rc =0 ;switch (fc) { +case CPACF_KLMD_SHA_256 : + rc =cpacf_sha256 (env, mmu_idx, ra, env->regs[1 ], &env->regs[r2], + &env->regs[r2 +1 ],S390_FEAT_TYPE_KLMD ); +break ;case CPACF_KLMD_SHA_512 : rc =cpacf_sha512 (env, mmu_idx, ra, env->regs[1 ], &env->regs[r2], &env->regs[r2 +1 ],S390_FEAT_TYPE_KLMD );
target/s390x/tcg/meson.build +1 -0
@@ -5,6 +5,7 @@ s390x_ss.add(when: 'CONFIG_TCG', if_true: files( )) s390x_common_ss.add(when: 'CONFIG_TCG', if_true: files( 'cc_helper.c', + 'cpacf_sha256.c', 'cpacf_sha512.c', 'crypto_helper.c', 'excp_helper.c',
Signature · 1 line
2.43.0
PATCH v12 4/17 crypto: Add aes-helpers file to support some AES modes
In reply to Harald FreudenbergerAdd a new file crypto/aes-helpers.c with simple functions to support some AES modes:
- AES cbc: AES_cbc_encrypt() AES_cbc_decrypt()
- AES ctr: AES_ctr_encrypt()
- AES xts: AES_xts_encrypt() AES_xts_decrypt()
and some AES related helpers:
- AES_xor()
- AES_xts_prep_next_tweak()
Add header file include/crypto/aes-helpers.h for these functions
--- crypto/aes-helpers.c | 106 ++++++++++++++++++++++++++++++++ crypto/meson.build | 1 + include/crypto/aes-helpers.h | 116 +++++++++++++++++++++++++++++++++++ 3 files changed, 223 insertions(+) create mode 100644 crypto/aes-helpers.c create mode 100644 include/crypto/aes-helpers.h
crypto/aes-helpers.c new file +106 -0
@@ -0,0 +1,106 @@ +/* +* SPDX-License-Identifier: GPL-2.0-or-later +* +* AES helper functions and mode implementations +* +* Authors: +* Harald Freudenberger <[email protected]> +*/ + +#include "qemu/osdep.h" +#include "crypto/aes.h" +#include "crypto/aes-helpers.h" + +void AES_xor (const unsigned char *src1,const unsigned char *src2, +unsigned char *dst) +{ +int i; + +for (i =0 ; i <AES_BLOCK_SIZE ; i++) { + dst[i] = src1[i] ^ src2[i]; + } +} + +void AES_cbc_encrypt (const unsigned char *in,unsigned char *out, +unsigned char *iv,const AES_KEY *key) +{ +unsigned char buf[AES_BLOCK_SIZE ]; + +/* in xor iv => buf */ +AES_xor (in, iv, buf); +/* encrypt buf => out */ +AES_encrypt (buf, out, key); +/* prep iv for next round */ +memcpy (iv, out,AES_BLOCK_SIZE ); +} + +void AES_cbc_decrypt (const unsigned char *in,unsigned char *out, +unsigned char *iv,const AES_KEY *key) +{ +unsigned char buf[AES_BLOCK_SIZE ]; + +/* decrypt in => buf */ +AES_decrypt (in, buf, key); +/* buf xor iv => out */ +AES_xor (buf, iv, out); +/* prep iv for next round */ +memcpy (iv, in,AES_BLOCK_SIZE ); +} + +void AES_ctr_encrypt (const unsigned char *in,unsigned char *out, +const unsigned char *ctr,const AES_KEY *key) +{ +unsigned char buf[AES_BLOCK_SIZE ]; + +/* encrypt ctr => buf */ +AES_encrypt (ctr, buf, key); +/* exor input data with encrypted ctr => out */ +AES_xor (in, buf, out); +} + +/* +* Tweak calculation for AES XTS. +* Multiply tweak by α (x) in GF(2^128) per IEEE 1619-2007. The tweak +* is a 128-bit little-endian integer (tweak[0]=LSB, tweak[15]=MSB). +* This implementation has been verified on litte and big endian. +*/ +void AES_xts_prep_next_tweak (unsigned char *tweak) +{ +unsigned char carry; +int i; + + carry = tweak[AES_BLOCK_SIZE -1 ] >>7 ; + +for (i =AES_BLOCK_SIZE -1 ; i >0 ; i--) { + tweak[i] = (unsigned char )((tweak[i] <<1 ) | (tweak[i -1 ] >>7 )); + } + + tweak[i] = (unsigned char )(tweak[i] <<1 ); + tweak[i] ^= (unsigned char )(0x87 & (unsigned char )(-(unsigned char )carry)); +} + +void AES_xts_encrypt (const unsigned char *in,unsigned char *out, +const unsigned char *tweak,const AES_KEY *key) +{ +unsigned char buf1[AES_BLOCK_SIZE ], buf2[AES_BLOCK_SIZE ]; + +/* in xor tweak => buf1 */ +AES_xor (in, tweak, buf1); +/* encrypt buf1 => buf2 */ +AES_encrypt (buf1, buf2, key); +/* buf2 xor tweak => out */ +AES_xor (buf2, tweak, out); +} + +void AES_xts_decrypt (const unsigned char *in,unsigned char *out, +const unsigned char *tweak,const AES_KEY *key) +{ +unsigned char buf1[AES_BLOCK_SIZE ], buf2[AES_BLOCK_SIZE ]; + +/* in xor tweak => buf1 */ +AES_xor (in, tweak, buf1); +/* encrypt buf1 => buf2 */ +AES_decrypt (buf1, buf2, key); +/* buf2 xor tweak => out */ +AES_xor (buf2, tweak, out); +}
crypto/meson.build +1 -0
@@ -55,6 +55,7 @@ system_ss.add(when: gnutls, if_true: files('tls-cipher-suites.c')) util_ss.add(files( 'aes.c', + 'aes-helpers.c', 'clmul.c', 'init.c', 'sm4.c',
include/crypto/aes-helpers.h new file +116 -0
116 lines not on this page · raw message
Signature · 1 line
2.43.0
Re: [PATCH v12 04/17] crypto: Add aes-helpers file to support some AES modes
Quoted 25 lines · Harald Freudenberger
Add a new file
crypto/aes-helpers.cwith simple functions to support some AES modes:
- AES cbc:AES_cbc_encrypt()AES_cbc_decrypt()
- AES ctr:AES_ctr_encrypt()
- AES xts:AES_xts_encrypt()AES_xts_decrypt()
and some AES related helpers:
-AES_xor()
-AES_xts_prep_next_tweak()
Add header fileinclude/crypto/aes-helpers.hfor these functionsSigned-off-by Harald Freudenberger <[email protected]>Reviewed-by Finn Callies <[email protected]>--- crypto/aes-helpers.c | 106 ++++++++++++++++++++++++++++++++ crypto/meson.build | 1 + include/crypto/aes-helpers.h | 116 +++++++++++++++++++++++++++++++++++ 3 files changed, 223 insertions(+)create mode 100644
crypto/aes-helpers.c
create mode 100644include/crypto/aes-helpers.hcrypto/aes-helpers.c new file +0
-0
[...]
Quoted 7 lines
crypto/aes-helpers.c new file +7
-0+void AES_ctr_encrypt (const unsigned char *in,unsigned char *out, +const unsigned char *ctr,const AES_KEY *key) +{ +unsigned char buf[AES_BLOCK_SIZE ]; + +/* encrypt ctr => buf */ +AES_encrypt (ctr, buf, key);
crypto/aes-helpers.c line 66
Quoted 10 lines
crypto/aes-helpers.c new file +10
-0+/* exor input data with encrypted ctr => out */ +AES_xor (in, buf, out); +} + +/* +* Tweak calculation for AES XTS. +* Multiply tweak by α (x) in GF(2^128) per IEEE 1619-2007. The tweak +* is a 128-bit little-endian integer (tweak[0]=LSB, tweak[15]=MSB). +* This implementation has been verified on litte and big endian. +*/
Nit: do we need to have this comment twice?
It's already present in the header.
Also typo: litte -> little (but I'm not sure if we even need to state that in the code).
[...]
Re: [PATCH v12 04/17] crypto: Add aes-helpers file to support some AES modes
Quoted 42 lines · Ilya Leoshkevich
Quoted 26 lines · Harald Freudenberger
Add a new file
crypto/aes-helpers.cwith simple functions to support some AES modes:
- AES cbc:AES_cbc_encrypt()AES_cbc_decrypt()
- AES ctr:AES_ctr_encrypt()
- AES xts:AES_xts_encrypt()AES_xts_decrypt()
and some AES related helpers:
-AES_xor()
-AES_xts_prep_next_tweak()
Add header fileinclude/crypto/aes-helpers.hfor these functionsSigned-off-by Harald Freudenberger <[email protected]>Reviewed-by Finn Callies <[email protected]>--- crypto/aes-helpers.c | 106 ++++++++++++++++++++++++++++++++ crypto/meson.build | 1 + include/crypto/aes-helpers.h | 116 +++++++++++++++++++++++++++++++++++ 3 files changed, 223 insertions(+)create mode 100644
crypto/aes-helpers.c
create mode 100644include/crypto/aes-helpers.hcrypto/aes-helpers.c new file +0
-0[...]
Quoted 12 lines
crypto/aes-helpers.c new file +12
-0+void AES_ctr_encrypt (const unsigned char *in,unsigned char *out, +const unsigned char *ctr,const AES_KEY *key) +{ +unsigned char buf[AES_BLOCK_SIZE ]; + +/* encrypt ctr => buf */ +AES_encrypt (ctr, buf, key); +/* exor input data with encrypted ctr => out */ +AES_xor (in, buf, out); +} + +/*
Quoted 8 lines
Quoted 5 lines
+ * Tweak calculation for AES XTS.
+ * Multiply tweak by α (x) in GF(2^128) per IEEE 1619-2007. The tweak
+ * is a 128-bit little-endian integer (tweak[0]=LSB, tweak[15]=MSB).
+ * This implementation has been verified on litte and big endian.
+ */Nit: do we need to have this comment twice?
It's already present in the header.
Well the text is different. aes-helpers.h:
/**
* AES_xts_prep_next_tweak:
*
* Tweak calculation for AES XTS.
* Prepares the next tweak value for AES-XTS mode by multiplying
* the current tweak by α (x) in GF(2^128) according to IEEE
1619-2007.
*
* @tweak: pointer to tweak value to be updated (16 bytes buffer
* containing a 128 bit little endian integer)
*/
void AES_xts_prep_next_tweak(unsigned char *tweak);
aes-helpers.c:
/*
* Tweak calculation for AES XTS.
* Multiply tweak by α (x) in GF(2^128) per IEEE 1619-2007. The tweak
* is a 128-bit little-endian integer (tweak[0]=LSB, tweak[15]=MSB).
* This implementation has been verified on little and big endian. */
void AES_xts_prep_next_tweak(unsigned char *tweak)
And the idea was to describe in the header more the usage whereas in the c code describe the implementation.
Quoted 3 lines
Also typo: litte -> little (but I'm not sure if we even need to state that in the code).
fixed the typo -> see v13
Quoted 4 lines
[...]
Reviewed-by Ilya Leoshkevich <[email protected]>
Thanks for your review
Re: [PATCH v12 04/17] crypto: Add aes-helpers file to support some AES modes
In reply to Harald FreudenbergerQuoted 33 lines · Harald Freudenberger
Add a new file
crypto/aes-helpers.cwith simple functions to support some AES modes:
- AES cbc:AES_cbc_encrypt()AES_cbc_decrypt()
- AES ctr:AES_ctr_encrypt()
- AES xts:AES_xts_encrypt()AES_xts_decrypt()
and some AES related helpers:
-AES_xor()
-AES_xts_prep_next_tweak()
Add header fileinclude/crypto/aes-helpers.hfor these functionsSigned-off-by Harald Freudenberger <[email protected]>Reviewed-by Finn Callies <[email protected]>--- crypto/aes-helpers.c | 106 ++++++++++++++++++++++++++++++++ crypto/meson.build | 1 + include/crypto/aes-helpers.h | 116 +++++++++++++++++++++++++++++++++++ 3 files changed, 223 insertions(+) create mode 100644 crypto/aes-helpers.c create mode 100644 include/crypto/aes-helpers.hinclude/crypto/aes-helpers.h new file +7
-0@@ -0,0 +1,116 @@ +/* +* SPDX-License-Identifier: GPL-2.0-or-later +* +* AES helper functions and modes +*/ + +#ifndef QEMU_AES_HELPERS_H
include/crypto/aes-helpers.h line 17
Quoted 10 lines
include/crypto/aes-helpers.h new file +10
-0+#define QEMU_AES_HELPERS_H + +/** +* AES_xor: +* +* Bitwise XOR operation between two AES blocks. +* +* @src1: first source buffer of AES_BLOCK_SIZE bytes +* @src2: second source buffer of AES_BLOCK_SIZE bytes +* @dst: destination buffer of AES_BLOCK_SIZE bytes
nit-picking - the list of parameters should normally be at the start of the docs comment, immediately after the function name, and then the description follows
With that change made:
With regards,
Daniel
Signature · 3 lines
|: https://berrange.com ~~ https://hachyderm.io/@berrange :| |: https://libvirt.org ~~ https://entangle-photo.org :| |: https://pixelfed.art/berrange ~~ https://fstop138.berrange.com :|
Re: [PATCH v12 04/17] crypto: Add aes-helpers file to support some AES modes
Quoted 41 lines · Daniel P. Berrangé
Quoted 40 lines · Harald Freudenberger
Add a new file
crypto/aes-helpers.cwith simple functions to support some AES modes:
- AES cbc:AES_cbc_encrypt()AES_cbc_decrypt()
- AES ctr:AES_ctr_encrypt()
- AES xts:AES_xts_encrypt()AES_xts_decrypt()
and some AES related helpers:
-AES_xor()
-AES_xts_prep_next_tweak()
Add header fileinclude/crypto/aes-helpers.hfor these functionsSigned-off-by Harald Freudenberger <[email protected]>Reviewed-by Finn Callies <[email protected]>--- crypto/aes-helpers.c | 106 ++++++++++++++++++++++++++++++++ crypto/meson.build | 1 + include/crypto/aes-helpers.h | 116 +++++++++++++++++++++++++++++++++++ 3 files changed, 223 insertions(+) create mode 100644 crypto/aes-helpers.c create mode 100644 include/crypto/aes-helpers.hinclude/crypto/aes-helpers.h new file +13
-0@@ -0,0 +1,116 @@ +/* +* SPDX-License-Identifier: GPL-2.0-or-later +* +* AES helper functions and modes +*/ + +#ifndef QEMU_AES_HELPERS_H +#define QEMU_AES_HELPERS_H + +/** +* AES_xor: +* +* Bitwise XOR operation between two AES blocks.
Quoted 8 lines
include/crypto/aes-helpers.h line 17
Quoted 4 lines
include/crypto/aes-helpers.h new file +4
-0+* +* @src1: first source buffer of AES_BLOCK_SIZE bytes +* @src2: second source buffer of AES_BLOCK_SIZE bytes +* @dst: destination buffer of AES_BLOCK_SIZE bytes nit-picking - the list of parameters should normally be at the start of the docs comment, immediately after the function name, and then the description follows
Ok, done -> see v13
Quoted 6 lines
With that change made:
Reviewed-by Daniel P. Berrangé <[email protected]>
Thanks for your review.
Quoted 4 lines
With regards,
Daniel
PATCH v12 5/17 target/s390x: Support AES ECB for cpacf km instruction
In reply to Harald FreudenbergerSupport the subfunctions CPACF_KM_AES_128, CPACF_KM_AES_192 and CPACF_KM_AES_256 for the cpacf km instruction.
--- target/s390x/gen-features.c | 3 + target/s390x/tcg/cpacf.h | 6 ++ target/s390x/tcg/cpacf_aes.c | 136 +++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 24 ++++++ target/s390x/tcg/meson.build | 1 + 5 files changed, 170 insertions(+) create mode 100644 target/s390x/tcg/cpacf_aes.c
target/s390x/gen-features.c +3 -0
@@ -922,6 +922,9 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KLMD_SHA_256 ,S390_FEAT_KLMD_SHA_512 ,S390_FEAT_PRNO_TRNG , +S390_FEAT_KM_AES_128 , +S390_FEAT_KM_AES_192 , + S390_FEAT_KM_AES_256, };/****** END FEATURE DEFS ******/
target/s390x/tcg/cpacf.h +6 -0
@@ -233,4 +233,10 @@ int cpacf_sha512(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t param_addr, uint64_t *message_reg, uint64_t *len_reg, uint32_t type); +/* from cpacf_aes.c */ +int cpacf_aes_ecb (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint32_t type,uint8_t fc,uint8_t mod); +#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c new file +136 -0
136 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +24 -0
@@ -89,6 +89,27 @@ static int cpacf_klmd(CPUS390XState *env, const int mmu_idx, const uintptr_t ra,return rc; } +static int cpacf_km (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint32_t r1,uint32_t r2,uint32_t r3, +uint8_t fc,uint8_t mod) +{ +int rc =0 ; + +switch (fc) { +case CPACF_KM_AES_128 : +case CPACF_KM_AES_192 : +case CPACF_KM_AES_256 : + rc =cpacf_aes_ecb (env, mmu_idx, ra, env->regs[1 ], + &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], +S390_FEAT_TYPE_KM , fc, mod); +break ; +default : +tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); + } + +return rc; +} +static int cpacf_ppno (CPUS390XState *env,const int mmu_idx,uintptr_t ra,uint32_t r1,uint32_t r2,uint32_t r3,uint8_t fc) {
@@ -153,6 +174,9 @@ uint32_t HELPER(msa)(CPUS390XState *env, uint32_t r1, uint32_t r2, uint32_t r3,case S390_FEAT_TYPE_KLMD : rc =cpacf_klmd (env, mmu_idx, ra, r1, r2, r3, fc);break ; +case S390_FEAT_TYPE_KM : + rc =cpacf_km (env, mmu_idx, ra, r1, r2, r3, fc, mod); +break ;case S390_FEAT_TYPE_PPNO : rc =cpacf_ppno (env, mmu_idx, ra, r1, r2, r3, fc);break ;
target/s390x/tcg/meson.build +1 -0
@@ -5,6 +5,7 @@ s390x_ss.add(when: 'CONFIG_TCG', if_true: files( )) s390x_common_ss.add(when: 'CONFIG_TCG', if_true: files( 'cc_helper.c', + 'cpacf_aes.c', 'cpacf_sha256.c', 'cpacf_sha512.c', 'crypto_helper.c',
Signature · 1 line
2.43.0
Re: [PATCH v12 05/17] target/s390x: Support AES ECB for cpacf km instruction
Quoted 87 lines · Harald Freudenberger
Support the subfunctions
CPACF_KM_AES_128,CPACF_KM_AES_192andCPACF_KM_AES_256for the cpacf km instruction.Tested-by Holger Dengler <[email protected]>Reviewed-by Finn Callies <[email protected]>Signed-off-by Harald Freudenberger <[email protected]>--- target/s390x/gen-features.c | 3 + target/s390x/tcg/cpacf.h | 6 ++ target/s390x/tcg/cpacf_aes.c | 136 +++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 24 ++++++ target/s390x/tcg/meson.build | 1 + 5 files changed, 170 insertions(+)create mode 100644
target/s390x/tcg/cpacf_aes.ctarget/s390x/gen-features.c +3
-0@@ -922,6 +922,9 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KLMD_SHA_256 ,S390_FEAT_KLMD_SHA_512 ,S390_FEAT_PRNO_TRNG , +S390_FEAT_KM_AES_128 , +S390_FEAT_KM_AES_192 , + S390_FEAT_KM_AES_256, };/****** END FEATURE DEFS ******/ target/s390x/tcg/cpacf.h +6
-0@@ -233,4 +233,10 @@ int cpacf_sha512(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t param_addr, uint64_t *message_reg, uint64_t *len_reg, uint32_t type); +/* from cpacf_aes.c */ +int cpacf_aes_ecb (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint32_t type,uint8_t fc,uint8_t mod); +#endif /* S390X_CPACF_H */ target/s390x/tcg/cpacf_aes.c new file +37
-0@@ -0,0 +1,136 @@ +/* +* SPDX-License-Identifier: GPL-2.0-or-later +* +* s390 cpacf aes +* +* Authors: +* Harald Freudenberger <[email protected]> +*/ + +#include "qemu/osdep.h" +#include "s390x-internal.h" +#include "tcg_s390x.h" +#include "accel/tcg/cpu-ldst-common.h" +#include "accel/tcg/cpu-mmu-index.h" +#include "crypto/aes.h" +#include "crypto/aes-helpers.h" +#include "target/s390x/tcg/cpacf.h" + +/* +* helper function to copy some memory from guest to a local buffer +*/ +static inline void copy_from_guest_wrap (CPUS390XState *env,const int mmu_idx, +const uintptr_t ra,uint64_t guest_addr, +uint8_t *dest,size_t len) +{ +const MemOpIdx oi =make_memop_idx (MO_8 , mmu_idx); + +for (size_t i =0 ; i < len; i++, guest_addr++) { +uint64_t waddr =wrap_address (env, guest_addr); + dest[i] =cpu_ldb_mmu (env, waddr, oi, ra); + } +} + +/* +* helper function to copy from a local buffer to guest memory +*/ +static inline void copy_to_guest_wrap(CPUS390XState *env, const int mmu_idx,
target/s390x/tcg/cpacf_aes.c line 47
Quoted 10 lines
target/s390x/tcg/cpacf_aes.c new file +10
-0+ const uintptr_t ra, uint64_t guest_addr, + const uint8_t *src, size_t len) +{ + const MemOpIdx oi = make_memop_idx(MO_8, mmu_idx); + +for (size_t i =0 ; i < len; i++, guest_addr++) { +uint64_t waddr =wrap_address (env, guest_addr); +cpu_stb_mmu (env, waddr, src[i], oi, ra); + } +}
Can we reuse these in other crypto code, e.g., sha256, sha512, HELPER(msa), etc?
PATCH v12 6/17 target/s390x: Support AES CBC for cpacf kmc instruction
In reply to Harald FreudenbergerSupport the subfunctions CPACF_KMC_AES_128, CPACF_KMC_AES_192 and CPACF_KMC_AES_256 for the cpacf kmc instruction.
--- target/s390x/gen-features.c | 3 ++ target/s390x/tcg/cpacf.h | 4 ++ target/s390x/tcg/cpacf_aes.c | 79 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 24 ++++++++++ 4 files changed, 110 insertions(+)
target/s390x/gen-features.c +3 -0
@@ -925,6 +925,9 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KM_AES_128 ,S390_FEAT_KM_AES_192 ,S390_FEAT_KM_AES_256 , +S390_FEAT_KMC_AES_128 , +S390_FEAT_KMC_AES_192 , + S390_FEAT_KMC_AES_256, };/****** END FEATURE DEFS ******/
target/s390x/tcg/cpacf.h +4 -0
@@ -238,5 +238,9 @@ int cpacf_aes_ecb(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t param_addr, uint64_t *dst_ptr_reg, uint64_t *src_ptr_reg, uint64_t *src_len_reg, uint32_t type, uint8_t fc, uint8_t mod); +int cpacf_aes_cbc (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint32_t type,uint8_t fc,uint8_t mod);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +79 -0
82 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +24 -0
@@ -110,6 +110,27 @@ static int cpacf_km(CPUS390XState *env, const int mmu_idx, uintptr_t ra,return rc; } +static int cpacf_kmc (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint32_t r1,uint32_t r2,uint32_t r3, +uint8_t fc,uint8_t mod) +{ +int rc =0 ; + +switch (fc) { +case CPACF_KMC_AES_128 : +case CPACF_KMC_AES_192 : +case CPACF_KMC_AES_256 : + rc =cpacf_aes_cbc (env, mmu_idx, ra, env->regs[1 ], + &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], +S390_FEAT_TYPE_KMC , fc, mod); +break ; +default : +tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); + } + +return rc; +} +static int cpacf_ppno (CPUS390XState *env,const int mmu_idx,uintptr_t ra,uint32_t r1,uint32_t r2,uint32_t r3,uint8_t fc) {
@@ -177,6 +198,9 @@ uint32_t HELPER(msa)(CPUS390XState *env, uint32_t r1, uint32_t r2, uint32_t r3,case S390_FEAT_TYPE_KM : rc =cpacf_km (env, mmu_idx, ra, r1, r2, r3, fc, mod);break ; +case S390_FEAT_TYPE_KMC : + rc =cpacf_kmc (env, mmu_idx, ra, r1, r2, r3, fc, mod); +break ;case S390_FEAT_TYPE_PPNO : rc =cpacf_ppno (env, mmu_idx, ra, r1, r2, r3, fc);break ;
Signature · 1 line
2.43.0
PATCH v12 7/17 target/s390x: Support AES CTR for cpacf kmctr instruction
In reply to Harald FreudenbergerSupport the subfunctions CPACF_KMCTR_AES_128, CPACF_KMCTR_AES_192 and CPACF_KMCTR_AES_256 for the cpacf kmctr instruction.
--- target/s390x/gen-features.c | 3 ++ target/s390x/tcg/cpacf.h | 5 +++ target/s390x/tcg/cpacf_aes.c | 70 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 24 +++++++++++ 4 files changed, 102 insertions(+)
target/s390x/gen-features.c +3 -0
@@ -928,6 +928,9 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KMC_AES_128 ,S390_FEAT_KMC_AES_192 ,S390_FEAT_KMC_AES_256 , +S390_FEAT_KMCTR_AES_128 , +S390_FEAT_KMCTR_AES_192 , + S390_FEAT_KMCTR_AES_256, };/****** END FEATURE DEFS ******/
target/s390x/tcg/cpacf.h +5 -0
@@ -242,5 +242,10 @@ int cpacf_aes_cbc(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t param_addr, uint64_t *dst_ptr_reg, uint64_t *src_ptr_reg, uint64_t *src_len_reg, uint32_t type, uint8_t fc, uint8_t mod); +int cpacf_aes_ctr (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint64_t *ctr_ptr_reg,uint32_t type, +uint8_t fc,uint8_t mod);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +70 -0
73 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +24 -0
@@ -131,6 +131,27 @@ static int cpacf_kmc(CPUS390XState *env, const int mmu_idx, uintptr_t ra,return rc; } +static int cpacf_kmctr (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint32_t r1,uint32_t r2,uint32_t r3, +uint8_t fc,uint8_t mod) +{ +int rc =0 ; + +switch (fc) { +case CPACF_KMCTR_AES_128 : +case CPACF_KMCTR_AES_192 : +case CPACF_KMCTR_AES_256 : + rc =cpacf_aes_ctr (env, mmu_idx, ra, env->regs[1 ], + &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], + &env->regs[r3],S390_FEAT_TYPE_KMCTR , fc, mod); +break ; +default : +tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); + } + +return rc; +} +static int cpacf_ppno (CPUS390XState *env,const int mmu_idx,uintptr_t ra,uint32_t r1,uint32_t r2,uint32_t r3,uint8_t fc) {
@@ -201,6 +222,9 @@ uint32_t HELPER(msa)(CPUS390XState *env, uint32_t r1, uint32_t r2, uint32_t r3,case S390_FEAT_TYPE_KMC : rc =cpacf_kmc (env, mmu_idx, ra, r1, r2, r3, fc, mod);break ; +case S390_FEAT_TYPE_KMCTR : + rc =cpacf_kmctr (env, mmu_idx, ra, r1, r2, r3, fc, mod); +break ;case S390_FEAT_TYPE_PPNO : rc =cpacf_ppno (env, mmu_idx, ra, r1, r2, r3, fc);break ;
Signature · 1 line
2.43.0
PATCH v12 8/17 target/s390x: Minimal AES XTS support for cpacf pcc instruction
In reply to Harald FreudenbergerSupport CPACF pcc subfunctions PCC-Compute-XTS-Parameter-AES-128 and PCC-Compute-XTS-Parameter-AES-245 but only for the special case block sequential number is 0. However, this covers the s390 AES XTS implementation in the Linux kernel and Libica and thus also Opencryptoki clear key via Libica.
--- target/s390x/gen-features.c | 2 ++ target/s390x/tcg/cpacf.h | 2 ++ target/s390x/tcg/cpacf_aes.c | 54 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 20 ++++++++++++ 4 files changed, 78 insertions(+)
target/s390x/gen-features.c +2 -0
@@ -931,6 +931,8 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KMCTR_AES_128 ,S390_FEAT_KMCTR_AES_192 ,S390_FEAT_KMCTR_AES_256 , +S390_FEAT_PCC_XTS_AES_128 , + S390_FEAT_PCC_XTS_AES_256, };/****** END FEATURE DEFS ******/
target/s390x/tcg/cpacf.h +2 -0
@@ -247,5 +247,7 @@ int cpacf_aes_ctr(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t *src_ptr_reg, uint64_t *src_len_reg, uint64_t *ctr_ptr_reg, uint32_t type, uint8_t fc, uint8_t mod); +int cpacf_aes_pcc (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint8_t fc);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +54 -0
57 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +20 -0
@@ -169,6 +169,23 @@ static int cpacf_ppno(CPUS390XState *env, const int mmu_idx, uintptr_t ra,return rc; } +static int cpacf_pcc (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint8_t fc) +{ +int rc =0 ; + +switch (fc) { +case CPACF_PCC_XTS_AES_128 : +case CPACF_PCC_XTS_AES_256 : + rc =cpacf_aes_pcc (env, mmu_idx, ra, env->regs[1 ], fc); +break ; +default : +tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); + } + +return rc; +} +uint32_t HELPER (msa )(CPUS390XState *env,uint32_t r1,uint32_t r2,uint32_t r3,uint32_t type) {
@@ -225,6 +242,9 @@ uint32_t HELPER(msa)(CPUS390XState *env, uint32_t r1, uint32_t r2, uint32_t r3,case S390_FEAT_TYPE_KMCTR : rc =cpacf_kmctr (env, mmu_idx, ra, r1, r2, r3, fc, mod);break ; +case S390_FEAT_TYPE_PCC : + rc =cpacf_pcc (env, mmu_idx, ra, fc); +break ;case S390_FEAT_TYPE_PPNO : rc =cpacf_ppno (env, mmu_idx, ra, r1, r2, r3, fc);break ;
Signature · 1 line
2.43.0
PATCH v12 9/17 target/s390x: Support AES XTS for cpacf km instruction
In reply to Harald FreudenbergerSupport the subfunctions XTS-AES-128 and XTS-AES-256 for the cpacf km instruction.
--- target/s390x/gen-features.c | 2 + target/s390x/tcg/cpacf.h | 4 ++ target/s390x/tcg/cpacf_aes.c | 81 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 6 +++ 4 files changed, 93 insertions(+)
target/s390x/gen-features.c +2 -0
@@ -925,6 +925,8 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KM_AES_128 ,S390_FEAT_KM_AES_192 ,S390_FEAT_KM_AES_256 , +S390_FEAT_KM_XTS_AES_128 , +S390_FEAT_KM_XTS_AES_256 ,S390_FEAT_KMC_AES_128 ,S390_FEAT_KMC_AES_192 , S390_FEAT_KMC_AES_256,
target/s390x/tcg/cpacf.h +4 -0
@@ -249,5 +249,9 @@ int cpacf_aes_ctr(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint8_t fc, uint8_t mod);int cpacf_aes_pcc (CPUS390XState *env,const int mmu_idx,uintptr_t ra,uint64_t param_addr,uint8_t fc); +int cpacf_aes_xts (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint32_t type,uint8_t fc,uint8_t mod);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +81 -0
84 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +6 -0
@@ -103,6 +103,12 @@ static int cpacf_km(CPUS390XState *env, const int mmu_idx, uintptr_t ra, &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], S390_FEAT_TYPE_KM, fc, mod);break ; +case CPACF_KM_XTS_128 : +case CPACF_KM_XTS_256 : + rc =cpacf_aes_xts (env, mmu_idx, ra, env->regs[1 ], + &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], +S390_FEAT_TYPE_KM , fc, mod); +break ;default :tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); }
Signature · 1 line
2.43.0
PATCH v12 10/17 target/s390x: Base support for cpacf protected keys and pckmo
In reply to Harald FreudenbergerAdd base support for cpacf protected key handling.
Add support for the pckmo subfunctions PCKMO-Encrypt-AES-128-Key, PCKMO-Encrypt-AES-192-Key and PCKMO-Encrypt-AES-256-Key which deal with protected keys. These pckmo subfunctions derive a protected key from an AES clear key by encrypting it with an internal AES wrapping key. More details about protected keys can be found in the "z/Architecture Prinziples of Operation" document.
The qemu version provided here is only a fake intended to make protected key available for developing and testing purpose:
* The protected key is 'derived' from the clear key by xoring the fixed pattern 0xAAAA... onto the key value.
* The AES Wrapping Key Verification Pattern is a fixed value of 32 bytes 0xFACEFACE...
Add preprocessor defines for the xor pattern and wkvp used to construct ('encrypt') a protected key from a clear key value with this implementation. Also add some static functions to 'encrypt' from clear key to protected key and 'decrypt' back to cpacf_aes.c.
The preprocessor defines shall be used later in testcases to construct and decode protected keys.
--- target/s390x/gen-features.c | 3 ++ target/s390x/tcg/cpacf.h | 29 +++++++++++++++ target/s390x/tcg/cpacf_aes.c | 64 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 21 +++++++++++ target/s390x/tcg/translate.c | 9 ++++- 5 files changed, 124 insertions(+), 2 deletions(-)
target/s390x/gen-features.c +3 -0
@@ -935,6 +935,9 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KMCTR_AES_256 ,S390_FEAT_PCC_XTS_AES_128 ,S390_FEAT_PCC_XTS_AES_256 , +S390_FEAT_PCKMO_AES_128 , +S390_FEAT_PCKMO_AES_192 , + S390_FEAT_PCKMO_AES_256, };/****** END FEATURE DEFS ******/
target/s390x/tcg/cpacf.h +29 -0
@@ -254,4 +254,33 @@ int cpacf_aes_xts(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t *src_ptr_reg, uint64_t *src_len_reg, uint32_t type, uint8_t fc, uint8_t mod); +/* +* Support for protected key cpacf functions. Note that this is +* a fake implementation intended for debugging and development. +* Do not use for production load ! +*/ + +/* +* Hard coded pattern xored with the AES clear key +* to 'produce' the protected key. +*/ +#define PROTKEY_XOR_PATTERN { \ + 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, \ + 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, \ + 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, \ + 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA } + +/* +* Hard coded wkvp ("Wrapping Key Verification Pattern") +*/ +#define PROTKEY_WKVP { \ + 0x0F, 0x0A, 0x0C, 0x0E, 0x0F, 0x0A, 0x0C, 0x0E, \ + 0x0F, 0x0A, 0x0C, 0x0E, 0x0F, 0x0A, 0x0C, 0x0E, \ + 0x0F, 0x0A, 0x0C, 0x0E, 0x0F, 0x0A, 0x0C, 0x0E, \ + 0x0F, 0x0A, 0x0C, 0x0E, 0x0F, 0x0A, 0x0C, 0x0E } + +/* from cpacf_aes.c */ +int cpacf_aes_pckmo (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint8_t fc); +#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +64 -0
67 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +21 -0
@@ -192,6 +192,24 @@ static int cpacf_pcc(CPUS390XState *env, const int mmu_idx, uintptr_t ra,return rc; } +static int cpacf_pckmo (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint8_t fc) +{ +int rc =0 ; + +switch (fc) { +case CPACF_PCKMO_ENC_AES_128_KEY : +case CPACF_PCKMO_ENC_AES_192_KEY : +case CPACF_PCKMO_ENC_AES_256_KEY : + rc =cpacf_aes_pckmo (env, mmu_idx, ra, env->regs[1 ], fc); +break ; +default : +tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); + } + +return rc; +} +uint32_t HELPER (msa )(CPUS390XState *env,uint32_t r1,uint32_t r2,uint32_t r3,uint32_t type) {
@@ -251,6 +269,9 @@ uint32_t HELPER(msa)(CPUS390XState *env, uint32_t r1, uint32_t r2, uint32_t r3,case S390_FEAT_TYPE_PCC : rc =cpacf_pcc (env, mmu_idx, ra, fc);break ; +case S390_FEAT_TYPE_PCKMO : + rc =cpacf_pckmo (env, mmu_idx, ra, fc); +break ;case S390_FEAT_TYPE_PPNO : rc =cpacf_ppno (env, mmu_idx, ra, r1, r2, r3, fc);break ;
target/s390x/tcg/translate.c +7 -2
@@ -2558,6 +2558,7 @@ static DisasJumpType op_msa(DisasContext *s, DisasOps *o)int r2 =have_field (s, r2) ?get_field (s, r2) :0 ;int r3 =have_field (s, r3) ?get_field (s, r3) :0 ;TCGv_i32 t_r1, t_r2, t_r3, type; +bool update_cc = true;switch (s->insn->data) {case S390_FEAT_TYPE_KMA :
@@ -2589,8 +2590,10 @@ static DisasJumpType op_msa(DisasContext *s, DisasOps *o)gen_program_exception (s,PGM_SPECIFICATION );return DISAS_NORETURN ; } -/* FALL THROUGH */ +break ;case S390_FEAT_TYPE_PCKMO : + update_cc = false; +/* FALL THROUGH */ case S390_FEAT_TYPE_PCC :case S390_FEAT_TYPE_KDSA :break ;
@@ -2603,7 +2606,9 @@ static DisasJumpType op_msa(DisasContext *s, DisasOps *o) t_r3 =tcg_constant_i32 (r3); type =tcg_constant_i32 (s->insn->data);gen_helper_msa (cc_op, tcg_env, t_r1, t_r2, t_r3, type); -set_cc_static (s); +if (update_cc) { +set_cc_static (s); + }return DISAS_NEXT ; }
Signature · 1 line
2.43.0
PATCH v12 11/17 target/s390x: Support protected key AES ECB for cpacf km instruction
In reply to Harald FreudenbergerSupport the subfunctions CPACF_KM_PAES_128, CPACF_KM_PAES_192 and CPACF_KM_PAES_256 for the cpacf km instruction.
--- target/s390x/gen-features.c | 3 ++ target/s390x/tcg/cpacf.h | 4 ++ target/s390x/tcg/cpacf_aes.c | 91 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 7 +++ 4 files changed, 105 insertions(+)
target/s390x/gen-features.c +3 -0
@@ -925,6 +925,9 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KM_AES_128 ,S390_FEAT_KM_AES_192 ,S390_FEAT_KM_AES_256 , +S390_FEAT_KM_EAES_128 , +S390_FEAT_KM_EAES_192 , +S390_FEAT_KM_EAES_256 ,S390_FEAT_KM_XTS_AES_128 ,S390_FEAT_KM_XTS_AES_256 , S390_FEAT_KMC_AES_128,
target/s390x/tcg/cpacf.h +4 -0
@@ -282,5 +282,9 @@ int cpacf_aes_xts(CPUS390XState *env, const int mmu_idx, uintptr_t ra,/* from cpacf_aes.c */ int cpacf_aes_pckmo (CPUS390XState *env,const int mmu_idx,uintptr_t ra,uint64_t param_addr,uint8_t fc); +int cpacf_paes_ecb (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint32_t type,uint8_t fc,uint8_t mod);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +91 -0
100 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +7 -0
@@ -103,6 +103,13 @@ static int cpacf_km(CPUS390XState *env, const int mmu_idx, uintptr_t ra, &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], S390_FEAT_TYPE_KM, fc, mod);break ; +case CPACF_KM_PAES_128 : +case CPACF_KM_PAES_192 : +case CPACF_KM_PAES_256 : + rc =cpacf_paes_ecb (env, mmu_idx, ra, env->regs[1 ], + &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], +S390_FEAT_TYPE_KM , fc, mod); +break ;case CPACF_KM_XTS_128 :case CPACF_KM_XTS_256 : rc = cpacf_aes_xts(env, mmu_idx, ra, env->regs[1],
Signature · 1 line
2.43.0
PATCH v12 12/17 target/s390x: Support protected key AES CBC for cpacf kmc instruction
In reply to Harald FreudenbergerSupport the subfunctions CPACF_KMC_PAES_128, CPACF_KMC_PAES_192 and CPACF_KMC_PAES_256 for the cpacf kmc instruction.
--- target/s390x/gen-features.c | 3 ++ target/s390x/tcg/cpacf.h | 4 ++ target/s390x/tcg/cpacf_aes.c | 90 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 7 +++ 4 files changed, 104 insertions(+)
target/s390x/gen-features.c +3 -0
@@ -933,6 +933,9 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KMC_AES_128 ,S390_FEAT_KMC_AES_192 ,S390_FEAT_KMC_AES_256 , +S390_FEAT_KMC_EAES_128 , +S390_FEAT_KMC_EAES_192 , +S390_FEAT_KMC_EAES_256 ,S390_FEAT_KMCTR_AES_128 ,S390_FEAT_KMCTR_AES_192 , S390_FEAT_KMCTR_AES_256,
target/s390x/tcg/cpacf.h +4 -0
@@ -286,5 +286,9 @@ int cpacf_paes_ecb(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t param_addr, uint64_t *dst_ptr_reg, uint64_t *src_ptr_reg, uint64_t *src_len_reg, uint32_t type, uint8_t fc, uint8_t mod); +int cpacf_paes_cbc (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint32_t type,uint8_t fc,uint8_t mod);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +90 -0
93 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +7 -0
@@ -137,6 +137,13 @@ static int cpacf_kmc(CPUS390XState *env, const int mmu_idx, uintptr_t ra, &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], S390_FEAT_TYPE_KMC, fc, mod);break ; +case CPACF_KMC_PAES_128 : +case CPACF_KMC_PAES_192 : +case CPACF_KMC_PAES_256 : + rc =cpacf_paes_cbc (env, mmu_idx, ra, env->regs[1 ], + &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], +S390_FEAT_TYPE_KMC , fc, mod); +break ;default :tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); }
Signature · 1 line
2.43.0
PATCH v12 13/17 target/s390x: Support protected key AES CTR for cpacf kmctr instruction
In reply to Harald FreudenbergerSupport the subfunctions CPACF_KMCTR_PAES_128, CPACF_KMCTR_PAES_192 and CPACF_KMCTR_PAES_256 for the cpacf kmctr instruction.
--- target/s390x/gen-features.c | 3 ++ target/s390x/tcg/cpacf.h | 5 ++ target/s390x/tcg/cpacf_aes.c | 80 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 7 +++ 4 files changed, 95 insertions(+)
target/s390x/gen-features.c +3 -0
@@ -939,6 +939,9 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KMCTR_AES_128 ,S390_FEAT_KMCTR_AES_192 ,S390_FEAT_KMCTR_AES_256 , +S390_FEAT_KMCTR_EAES_128 , +S390_FEAT_KMCTR_EAES_192 , +S390_FEAT_KMCTR_EAES_256 ,S390_FEAT_PCC_XTS_AES_128 ,S390_FEAT_PCC_XTS_AES_256 , S390_FEAT_PCKMO_AES_128,
target/s390x/tcg/cpacf.h +5 -0
@@ -290,5 +290,10 @@ int cpacf_paes_cbc(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t param_addr, uint64_t *dst_ptr_reg, uint64_t *src_ptr_reg, uint64_t *src_len_reg, uint32_t type, uint8_t fc, uint8_t mod); +int cpacf_paes_ctr (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint64_t *ctr_ptr_reg,uint32_t type, +uint8_t fc,uint8_t mod);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +80 -0
83 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +7 -0
@@ -165,6 +165,13 @@ static int cpacf_kmctr(CPUS390XState *env, const int mmu_idx, uintptr_t ra, &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], &env->regs[r3], S390_FEAT_TYPE_KMCTR, fc, mod);break ; +case CPACF_KMCTR_PAES_128 : +case CPACF_KMCTR_PAES_192 : +case CPACF_KMCTR_PAES_256 : + rc =cpacf_paes_ctr (env, mmu_idx, ra, env->regs[1 ], + &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], + &env->regs[r3],S390_FEAT_TYPE_KMCTR , fc, mod); +break ;default :tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); }
Signature · 1 line
2.43.0
PATCH v12 14/17 target/s390x: Minimal protected key AES XTS support for cpacf pcc instruction
In reply to Harald FreudenbergerSupport CPACF pcc subfunctions PCC-Compute-XTS-Parameter-Encrypted-AES-128 and PCC-Compute-XTS-Parameter-Encrypted-AES-128 but only for the special case block sequential number is 0. However, this covers the s390 PAES XTS implementation in the Linux kernel.
--- target/s390x/gen-features.c | 2 + target/s390x/tcg/cpacf.h | 2 + target/s390x/tcg/cpacf_aes.c | 65 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 4 ++ 4 files changed, 73 insertions(+)
target/s390x/gen-features.c +2 -0
@@ -944,6 +944,8 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KMCTR_EAES_256 ,S390_FEAT_PCC_XTS_AES_128 ,S390_FEAT_PCC_XTS_AES_256 , +S390_FEAT_PCC_XTS_EAES_128 , +S390_FEAT_PCC_XTS_EAES_256 ,S390_FEAT_PCKMO_AES_128 ,S390_FEAT_PCKMO_AES_192 , S390_FEAT_PCKMO_AES_256,
target/s390x/tcg/cpacf.h +2 -0
@@ -295,5 +295,7 @@ int cpacf_paes_ctr(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t *src_ptr_reg, uint64_t *src_len_reg, uint64_t *ctr_ptr_reg, uint32_t type, uint8_t fc, uint8_t mod); +int cpacf_paes_pcc (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint8_t fc);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +65 -0
68 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +4 -0
@@ -206,6 +206,10 @@ static int cpacf_pcc(CPUS390XState *env, const int mmu_idx, uintptr_t ra,case CPACF_PCC_XTS_AES_256 : rc =cpacf_aes_pcc (env, mmu_idx, ra, env->regs[1 ], fc);break ; +case CPACF_PCC_XTS_PAES_128 : +case CPACF_PCC_XTS_PAES_256 : + rc =cpacf_paes_pcc (env, mmu_idx, ra, env->regs[1 ], fc); +break ;default :tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); }
Signature · 1 line
2.43.0
PATCH v12 15/17 target/s390x: Support protected key AES XTS for cpacf km instruction
In reply to Harald FreudenbergerSupport the subfunctions CPACF_KM_PXTS_128 and CPACF_KM_PXTS_256 for the cpacf km instruction.
--- target/s390x/gen-features.c | 2 + target/s390x/tcg/cpacf.h | 4 ++ target/s390x/tcg/cpacf_aes.c | 93 ++++++++++++++++++++++++++++++++ target/s390x/tcg/crypto_helper.c | 6 +++ 4 files changed, 105 insertions(+)
target/s390x/gen-features.c +2 -0
@@ -930,6 +930,8 @@ static uint16_t qemu_MAX[] = {S390_FEAT_KM_EAES_256 ,S390_FEAT_KM_XTS_AES_128 ,S390_FEAT_KM_XTS_AES_256 , +S390_FEAT_KM_XTS_EAES_128 , +S390_FEAT_KM_XTS_EAES_256 ,S390_FEAT_KMC_AES_128 ,S390_FEAT_KMC_AES_192 , S390_FEAT_KMC_AES_256,
target/s390x/tcg/cpacf.h +4 -0
@@ -297,5 +297,9 @@ int cpacf_paes_ctr(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint8_t fc, uint8_t mod);int cpacf_paes_pcc (CPUS390XState *env,const int mmu_idx,uintptr_t ra,uint64_t param_addr,uint8_t fc); +int cpacf_paes_xts (CPUS390XState *env,const int mmu_idx,uintptr_t ra, +uint64_t param_addr,uint64_t *dst_ptr_reg, +uint64_t *src_ptr_reg,uint64_t *src_len_reg, +uint32_t type,uint8_t fc,uint8_t mod);#endif /* S390X_CPACF_H */
target/s390x/tcg/cpacf_aes.c +93 -0
96 lines not on this page · raw message
target/s390x/tcg/crypto_helper.c +6 -0
@@ -116,6 +116,12 @@ static int cpacf_km(CPUS390XState *env, const int mmu_idx, uintptr_t ra, &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], S390_FEAT_TYPE_KM, fc, mod);break ; +case CPACF_KM_PXTS_128 : +case CPACF_KM_PXTS_256 : + rc =cpacf_paes_xts (env, mmu_idx, ra, env->regs[1 ], + &env->regs[r1], &env->regs[r2], &env->regs[r2 +1 ], +S390_FEAT_TYPE_KM , fc, mod); +break ;default :tcg_s390_program_interrupt (env,PGM_SPECIFICATION , ra); }
Signature · 1 line
2.43.0
PATCH v12 16/17 docs/s390: Document CPACF instructions support
In reply to Harald FreudenbergerAdd a first document covering the Qemu s390 CPACF instructions and functions supported.
--- docs/system/s390x/cpacf.rst | 146 +++++++++++++++++++++++++++++++++++ docs/system/target-s390x.rst | 1 + 2 files changed, 147 insertions(+) create mode 100644 docs/system/s390x/cpacf.rst
docs/system/s390x/cpacf.rst new file +146 -0
@@ -0,0 +1,146 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +CPACF Support +============= + +CPACF +----- + +CP Assist for Cryptographic Function (CPACF) is a hardware-integrated +coprocessor feature built into every processor core of IBM Z and +LinuxONE mainframes (s390x architecture). It provides high-speed, +hardware-accelerated encryption and hashing directly on the CPU. + +CPACF provides a set of z/Architecture instructions (known as Message +Security Assist or MSA) that execute cryptographic operations +synchronously with the main processor. + +- Symmetric Encryption: Support for AES (128, 192, 256-bit), DES, and + Triple-DES (TDES). +- Hashing: Acceleration for SHA-1, SHA-2 (up to SHA-512), SHA-3 and + SHAKE. +- Random Number Generation: Pseudo Random Number Generator (PRNG) and + a hardware-based True Random Number Generator (TRNG). +- Asymmetric Support: Elliptic Curve Cryptography (ECC) primitives + P-256, P-384, P-521, Montgomery/Edwards curves (e.g., Ed25519). + +Documentation about CPACF instructions is publicly available and +can be found in the "z/Architecture Principles of Operation" +accessible at the IBM documentation hub https://www.ibm.com/docs/en. +For example the latest version as a pdf is available here: +https://www.ibm.com/support/pages/zvm/library/other/22783214.pdf + + +CPACF instructions +------------------ + +Here is a list of implemented CPACF instructions and the supported +functions for each instruction: + +KDSA (COMPUTE DIGITAL SIGNATURE AUTHENTICATION) +- Function code 0x00 - Function Query + +KIMD (COMPUTE INTERMEDIATE MESSAGE DIGEST) +- Function code 0x00 - Function Query +- Function code 0x02 - CPACF_KIMD_SHA_256 +- Function code 0x03 - CPACF_KIMD_SHA_512 + +KLMD (COMPUTE LAST MESSAGE DIGEST) +- Function code 0x00 - Function Query +- Function code 0x02 - CPACF_KLMD_SHA_256 +- Function code 0x03 - CPACF_KLMD_SHA_512 + +KM (CIPHER MESSAGE) +- Function code 0x00 - Function Query +- Function code 0x12 - CPACF_KM_AES_128 +- Function code 0x13 - CPACF_KM_AES_192 +- Function code 0x14 - CPACF_KM_AES_256 +- Function code 0x1a - CPACF_KM_PAES_128 +- Function code 0x1b - CPACF_KM_PAES_192 +- Function code 0x1c - CPACF_KM_PAES_256 +- Function code 0x32 - CPACF_KM_XTS_128 +- Function code 0x34 - CPACF_KM_XTS_256 +- Function code 0x3a - CPACF_KM_PXTS_128 +- Function code 0x3c - CPACF_KM_PXTS_256 + +KMAC (COMPUTE MESSAGE AUTHENTICATION CODE) +- Function code 0x00 - Function Query + +KMC (CIPHER MESSAGE WITH CHAINING) +- Function code 0x00 - Function Query +- Function code 0x12 - CPACF_KMC_AES_128 +- Function code 0x13 - CPACF_KMC_AES_192 +- Function code 0x14 - CPACF_KMC_AES_256 +- Function code 0x1a - CPACF_KMC_PAES_128 +- Function code 0x1b - CPACF_KMC_PAES_192 +- Function code 0x1c - CPACF_KMC_PAES_256 + +KMCTR (CIPHER MESSAGE WITH COUNTER) +- Function code 0x00 - Function Query +- Function code 0x12 - CPACF_KMCTR_AES_128 +- Function code 0x13 - CPACF_KMCTR_AES_192 +- Function code 0x14 - CPACF_KMCTR_AES_256 +- Function code 0x1a - CPACF_KMCTR_PAES_128 +- Function code 0x1b - CPACF_KMCTR_PAES_192 +- Function code 0x1c - CPACF_KMCTR_PAES_256 + +KMF (CIPHER MESSAGE WITH CIPHER FEEDBACK) +- not supported + +KMO (CIPHER MESSAGE WITH OUTPUT FEEDBACK) +- not supported + +PCC (PERFORM CRYPTOGRAPHIC COMPUTATION) +- Function code 0x00 - Function Query +- Function code 0x32 - compute XTS param AES-128 +- Function code 0x34 - compute XTS param AES-256 +- Function code 0x3a - compute XTS param Encrypted AES-128 +- Function code 0x3c - compute XTS param Encrypted AES-256 + +PCKMO (PERFORM CRYPTOGRAPHIC KEY MANAGEMENT OPERATION) +- Function code 0x00 - Function Query +- Function code 0x12 - CPACF_PCKMO_ENC_AES_128_KEY +- Function code 0x13 - CPACF_PCKMO_ENC_AES_192_KEY +- Function code 0x14 - CPACF_PCKMO_ENC_AES_256_KEY + +PRNO (PERFORM RANDOM NUMBER OPERATION) +- Function code 0x00 - Function Query +- Function code 0x72 - CPACF_PRNO_TRNG + +Note that the use of a not supported CPACF instruction (KMF and KMO) +or invocation of a not listed function will result in a Specification +Exception. + +Not listed CPACF instructions (KMA, KMF, KMO) cause an Operation +Exception when used. Not listed functions cause a Specification +Exception when called. If only the query function is listed (KDSA), +then the query function will return a function status word with all +but the query function bit set to 0. + + +Protected key support +--------------------- + +The qemu version for protected key support is only a fake provided +here for developing and testing purpose: + +- The protected key is _derived_ from the clear key by xoring the + fixed pattern 0xAAAA... onto the key value. +- The AES Wrapping Key Verification Pattern is a fixed value of 32 + bytes 0xFACEFACE... + +The PCKMO instruction implementation does exactly this - _derive_ a +_protected_ key from the clear key given by xor 0xAAAA... and writing +the fixed value for the WKVP of 0xFACEFACE into the blob. +The other subfunctions of the CPACF instructions dealing with +protected key treat the protected key blob by first checking for the +WKVP (against the fixed value of 0xFACEFACE...) and second +_decrypting_ the key value by xoring 0xAAAA... and then execute the +clear key operation with the decrypted key value. +This is suitable for testing purpose but such keys are not for real +production load and would open up a huge security breach! + +For more details about protected keys see the "z/Architecture +Principles of Operation" document chapter "General Instructions" +sub-chapter "Protection of Cryptographic Keys" and again the +implementation here does NOT implement what is explained there.
docs/system/target-s390x.rst +1 -0
@@ -35,3 +35,4 @@ Architectural features s390x/bootdevices s390x/protvirt s390x/cpu-topology + s390x/cpacf
Signature · 1 line
2.43.0
Re: [PATCH v12 16/17] docs/s390: Document CPACF instructions support
Quoted 5 lines · Harald Freudenberger
Add a first document covering the Qemu s390 CPACF instructions and functions supported.
Signed-off-by Harald Freudenberger <[email protected]>Reviewed-by Finn Callies <[email protected]>
PATCH v12 17/17 tests/tcg/s390x: Add tests for CPACF instructions
In reply to Harald FreudenbergerAdd simple tests for the CPACF instructions implemented:
- kdsa - minimal as only query is implemented
- kimd - query, sha256, sha512
- klmd - query, sha256, sha512
- km - query, aes 128, 192, 256 with clear and prot key
- kmac - minimal as only query is implemented
- kmc - query, aes 128, 192, 256 with clear and prot key
- kmctr - query, aes 128, 192, 256 with clear and prot key
- pcc - query, xts aes 128, 256 and prot key xts aes 128, 256
- prno - query, trng
No test for pckmo as this is a privileged instruction. No test for kma, kmf, kmo as these instructions are currently not implemented at all.
--- target/s390x/tcg/cpacf.h | 7 + tests/tcg/s390x/Makefile.target | 9 + tests/tcg/s390x/cpacf-kdsa.c | 58 ++++ tests/tcg/s390x/cpacf-kimd.c | 166 +++++++++ tests/tcg/s390x/cpacf-klmd.c | 206 +++++++++++ tests/tcg/s390x/cpacf-km.c | 590 ++++++++++++++++++++++++++++++++ tests/tcg/s390x/cpacf-kmac.c | 58 ++++ tests/tcg/s390x/cpacf-kmc.c | 351 +++++++++++++++++++ tests/tcg/s390x/cpacf-kmctr.c | 360 +++++++++++++++++++ tests/tcg/s390x/cpacf-pcc.c | 245 +++++++++++++ tests/tcg/s390x/cpacf-prno.c | 131 +++++++ tests/tcg/s390x/cpacf.h | 571 +++++++++++++++++++++++++++++++ 12 files changed, 2752 insertions(+) create mode 100644 tests/tcg/s390x/cpacf-kdsa.c create mode 100644 tests/tcg/s390x/cpacf-kimd.c create mode 100644 tests/tcg/s390x/cpacf-klmd.c create mode 100644 tests/tcg/s390x/cpacf-km.c create mode 100644 tests/tcg/s390x/cpacf-kmac.c create mode 100644 tests/tcg/s390x/cpacf-kmc.c create mode 100644 tests/tcg/s390x/cpacf-kmctr.c create mode 100644 tests/tcg/s390x/cpacf-pcc.c create mode 100644 tests/tcg/s390x/cpacf-prno.c create mode 100644 tests/tcg/s390x/cpacf.h
target/s390x/tcg/cpacf.h +7 -0
@@ -223,6 +223,8 @@#define CPACF_KDSA_PSIGN_ED25519 48#define CPACF_KDSA_PSIGN_ED448 52 +#ifndef CPACF_H_INCLUDE_FOR_TESTS +/* from cpacf_sha256.c */ int cpacf_sha256(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t param_addr, uint64_t *message_reg, uint64_t *len_reg,
@@ -254,6 +256,8 @@ int cpacf_aes_xts(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t *src_ptr_reg, uint64_t *src_len_reg, uint32_t type, uint8_t fc, uint8_t mod); +#endif /* CPACF_H_INCLUDE_FOR_TESTS */ +/* * Support for protected key cpacf functions. Note that this is * a fake implementation intended for debugging and development.
@@ -279,6 +283,8 @@ int cpacf_aes_xts(CPUS390XState *env, const int mmu_idx, uintptr_t ra, 0x0F, 0x0A, 0x0C, 0x0E, 0x0F, 0x0A, 0x0C, 0x0E, \ 0x0F, 0x0A, 0x0C, 0x0E, 0x0F, 0x0A, 0x0C, 0x0E } +#ifndef CPACF_H_INCLUDE_FOR_TESTS +/* from cpacf_aes.c */ int cpacf_aes_pckmo (CPUS390XState *env,const int mmu_idx,uintptr_t ra,uint64_t param_addr,uint8_t fc);
@@ -302,4 +308,5 @@ int cpacf_paes_xts(CPUS390XState *env, const int mmu_idx, uintptr_t ra, uint64_t *src_ptr_reg, uint64_t *src_len_reg, uint32_t type, uint8_t fc, uint8_t mod); +#endif /* CPACF_H_INCLUDE_FOR_TESTS */ #endif /* S390X_CPACF_H */
tests/tcg/s390x/Makefile.target +9 -0
@@ -50,6 +50,15 @@ TESTS+=cvb TESTS+=ts TESTS+=ex-smc TESTS+=divide-to-integer +TESTS+=cpacf-kdsa +TESTS+=cpacf-kimd +TESTS+=cpacf-klmd +TESTS+=cpacf-km +TESTS+=cpacf-kmac +TESTS+=cpacf-kmc +TESTS+=cpacf-kmctr +TESTS+=cpacf-pcc +TESTS+=cpacf-prno cdsg: CFLAGS+=-pthread cdsg: LDFLAGS+=-pthread
tests/tcg/s390x/cpacf-kdsa.c new file +58 -0
58 lines not on this page · raw message
tests/tcg/s390x/cpacf-kimd.c new file +166 -0
166 lines not on this page · raw message
tests/tcg/s390x/cpacf-klmd.c new file +206 -0
206 lines not on this page · raw message
tests/tcg/s390x/cpacf-km.c new file +590 -0
590 lines not on this page · raw message
tests/tcg/s390x/cpacf-kmac.c new file +58 -0
58 lines not on this page · raw message
tests/tcg/s390x/cpacf-kmc.c new file +351 -0
351 lines not on this page · raw message
tests/tcg/s390x/cpacf-kmctr.c new file +360 -0
360 lines not on this page · raw message
tests/tcg/s390x/cpacf-pcc.c new file +245 -0
245 lines not on this page · raw message
tests/tcg/s390x/cpacf-prno.c new file +131 -0
131 lines not on this page · raw message
tests/tcg/s390x/cpacf.h new file +571 -0
571 lines not on this page · raw message
Signature · 1 line
2.43.0
Re: [PATCH v12 17/17] tests/tcg/s390x: Add tests for CPACF instructions
Quoted 29 lines · Harald Freudenberger
Add simple tests for the CPACF instructions implemented:
- kdsa - minimal as only query is implemented
- kimd - query, sha256, sha512
- klmd - query, sha256, sha512
- km - query, aes 128, 192, 256 with clear and prot key
- kmac - minimal as only query is implemented
- kmc - query, aes 128, 192, 256 with clear and prot key
- kmctr - query, aes 128, 192, 256 with clear and prot key
- pcc - query, xts aes 128, 256 and prot key xts aes 128, 256
- prno - query, trng
No test for pckmo as this is a privileged instruction. No test for kma, kmf, kmo as these instructions are currently not implemented at all.Signed-off-by Harald Freudenberger <[email protected]>--- target/s390x/tcg/cpacf.h | 7 + tests/tcg/s390x/Makefile.target | 9 + tests/tcg/s390x/cpacf-kdsa.c | 58 ++++ tests/tcg/s390x/cpacf-kimd.c | 166 +++++++++ tests/tcg/s390x/cpacf-klmd.c | 206 +++++++++++ tests/tcg/s390x/cpacf-km.c | 590 ++++++++++++++++++++++++++++++++ tests/tcg/s390x/cpacf-kmac.c | 58 ++++ tests/tcg/s390x/cpacf-kmc.c | 351 +++++++++++++++++++ tests/tcg/s390x/cpacf-kmctr.c | 360 +++++++++++++++++++ tests/tcg/s390x/cpacf-pcc.c | 245 +++++++++++++ tests/tcg/s390x/cpacf-prno.c | 131 +++++++ tests/tcg/s390x/cpacf.h | 571 +++++++++++++++++++++++++++++++ 12 files changed, 2752 insertions(+)
Quoted 10 lines
create mode 100644
tests/tcg/s390x/cpacf-kdsa.ccreate mode 100644tests/tcg/s390x/cpacf-kimd.ccreate mode 100644tests/tcg/s390x/cpacf-klmd.ccreate mode 100644tests/tcg/s390x/cpacf-km.ccreate mode 100644tests/tcg/s390x/cpacf-kmac.ccreate mode 100644tests/tcg/s390x/cpacf-kmc.ccreate mode 100644tests/tcg/s390x/cpacf-kmctr.ccreate mode 100644tests/tcg/s390x/cpacf-pcc.ccreate mode 100644tests/tcg/s390x/cpacf-prno.ccreate mode 100644tests/tcg/s390x/cpacf.h
I get failures when running these on a real z17, for example:
$ ./cpacf-kdsa test_kdsa_query failed cpacf-kdsa: 1 failures
Re: [PATCH v12 17/17] tests/tcg/s390x: Add tests for CPACF instructions
Quoted 43 lines · Ilya Leoshkevich
Quoted 31 lines · Harald Freudenberger
Add simple tests for the CPACF instructions implemented:
- kdsa - minimal as only query is implemented
- kimd - query, sha256, sha512
- klmd - query, sha256, sha512
- km - query, aes 128, 192, 256 with clear and prot key
- kmac - minimal as only query is implemented
- kmc - query, aes 128, 192, 256 with clear and prot key
- kmctr - query, aes 128, 192, 256 with clear and prot key
- pcc - query, xts aes 128, 256 and prot key xts aes 128, 256
- prno - query, trng
No test for pckmo as this is a privileged instruction. No test for kma, kmf, kmo as these instructions are currently not implemented at all.Signed-off-by Harald Freudenberger <[email protected]>--- target/s390x/tcg/cpacf.h | 7 + tests/tcg/s390x/Makefile.target | 9 + tests/tcg/s390x/cpacf-kdsa.c | 58 ++++ tests/tcg/s390x/cpacf-kimd.c | 166 +++++++++ tests/tcg/s390x/cpacf-klmd.c | 206 +++++++++++ tests/tcg/s390x/cpacf-km.c | 590 ++++++++++++++++++++++++++++++++ tests/tcg/s390x/cpacf-kmac.c | 58 ++++ tests/tcg/s390x/cpacf-kmc.c | 351 +++++++++++++++++++ tests/tcg/s390x/cpacf-kmctr.c | 360 +++++++++++++++++++ tests/tcg/s390x/cpacf-pcc.c | 245 +++++++++++++ tests/tcg/s390x/cpacf-prno.c | 131 +++++++ tests/tcg/s390x/cpacf.h | 571 +++++++++++++++++++++++++++++++ 12 files changed, 2752 insertions(+)Quoted 10 lines
create mode 100644
tests/tcg/s390x/cpacf-kdsa.ccreate mode 100644tests/tcg/s390x/cpacf-kimd.ccreate mode 100644tests/tcg/s390x/cpacf-klmd.ccreate mode 100644tests/tcg/s390x/cpacf-km.ccreate mode 100644tests/tcg/s390x/cpacf-kmac.ccreate mode 100644tests/tcg/s390x/cpacf-kmc.ccreate mode 100644tests/tcg/s390x/cpacf-kmctr.ccreate mode 100644tests/tcg/s390x/cpacf-pcc.ccreate mode 100644tests/tcg/s390x/cpacf-prno.ccreate mode 100644tests/tcg/s390x/cpacf.h
Quoted 5 lines
I get failures when running these on a real z17, for example:
$ ./cpacf-kdsa test_kdsa_query failed cpacf-kdsa: 1 failures
Ok, I only tested on qemu. But of course you are right, it should work fine on a real machine also. Will check this ...
Oh maybe one thing: query works with a fixed bitfield of subfunctions which are supported - by the QEMU CPACF implementation. So a real query may result in a lot of more subfunctions enabled in the result bitfield and thus the compare will fail.
Re: [PATCH v12 17/17] tests/tcg/s390x: Add tests for CPACF instructions
In reply to Ilya LeoshkevichQuoted 43 lines · Ilya Leoshkevich
Quoted 31 lines · Harald Freudenberger
Add simple tests for the CPACF instructions implemented:
- kdsa - minimal as only query is implemented
- kimd - query, sha256, sha512
- klmd - query, sha256, sha512
- km - query, aes 128, 192, 256 with clear and prot key
- kmac - minimal as only query is implemented
- kmc - query, aes 128, 192, 256 with clear and prot key
- kmctr - query, aes 128, 192, 256 with clear and prot key
- pcc - query, xts aes 128, 256 and prot key xts aes 128, 256
- prno - query, trng
No test for pckmo as this is a privileged instruction. No test for kma, kmf, kmo as these instructions are currently not implemented at all.Signed-off-by Harald Freudenberger <[email protected]>--- target/s390x/tcg/cpacf.h | 7 + tests/tcg/s390x/Makefile.target | 9 + tests/tcg/s390x/cpacf-kdsa.c | 58 ++++ tests/tcg/s390x/cpacf-kimd.c | 166 +++++++++ tests/tcg/s390x/cpacf-klmd.c | 206 +++++++++++ tests/tcg/s390x/cpacf-km.c | 590 ++++++++++++++++++++++++++++++++ tests/tcg/s390x/cpacf-kmac.c | 58 ++++ tests/tcg/s390x/cpacf-kmc.c | 351 +++++++++++++++++++ tests/tcg/s390x/cpacf-kmctr.c | 360 +++++++++++++++++++ tests/tcg/s390x/cpacf-pcc.c | 245 +++++++++++++ tests/tcg/s390x/cpacf-prno.c | 131 +++++++ tests/tcg/s390x/cpacf.h | 571 +++++++++++++++++++++++++++++++ 12 files changed, 2752 insertions(+)Quoted 10 lines
create mode 100644
tests/tcg/s390x/cpacf-kdsa.ccreate mode 100644tests/tcg/s390x/cpacf-kimd.ccreate mode 100644tests/tcg/s390x/cpacf-klmd.ccreate mode 100644tests/tcg/s390x/cpacf-km.ccreate mode 100644tests/tcg/s390x/cpacf-kmac.ccreate mode 100644tests/tcg/s390x/cpacf-kmc.ccreate mode 100644tests/tcg/s390x/cpacf-kmctr.ccreate mode 100644tests/tcg/s390x/cpacf-pcc.ccreate mode 100644tests/tcg/s390x/cpacf-prno.ccreate mode 100644tests/tcg/s390x/cpacf.h
Quoted 5 lines
I get failures when running these on a real z17, for example:
$ ./cpacf-kdsa test_kdsa_query failed cpacf-kdsa: 1 failures
I've reworked the testcases - see v13 coming soon.
The query function now compares against the minimal expected subfunction set but does not fail if there are more subfunctions available. However, the tests will still fail when run on real hardware when it comes to protected key related operations.