Bug report: nvme :Cannot transition to power state D0 for parent in D3hot
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 6 lines · Jun Miao
Hi all
bug log:
* acpi device:1b: Cannot transition to power state D0 for parent in D3hot*
When does this happen?
Quoted 45 lines
*
*kernel version:
Linux intel-x86-64 5.15.0-rc4
device info:
root@intel-x86-64:~#lspci:
02:00.0 Non-Volatile memory controller: Intel Corporation SSD Pro 7600p/760p/E 6100p Series (rev 03)
root@intel-x86-64:~# lspci -vnn -s 02:00.0 02:00.0 Non-Volatile memory controller [0108]: Intel Corporation SSD Pro 7600p/760p/E 6100p Series [8086:f1a6] (rev 03) (prog-if 02 [NVM Express]) Subsystem: Intel Corporation Intel Corporation SSD Pro 7600p/760p/E 6100p Series [NVM Express] [8086:390b] Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0, IOMMU group 11 Memory at df000000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+ Capabilities: [70] Express Endpoint, MSI 00 Capabilities: [b0] MSI-X: Enable+ Count=16 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [158] Secondary PCI Express Capabilities: [178] Latency Tolerance Reporting Capabilities: [180] L1 PM Substates Kernel driver in use: nvmekernel source :
drivers/acpi/device_pm.c/ 197 if (!device->power.flags.ignore_parent && //
// 198device->parent&& (state <device->parent->power.state)) { // // 199 dev_warn(&device->dev, //
// 200 "Cannot transition to power state %s for parent in %s\n",// // 201acpi_power_state_string(state), //
// 202acpi_power_state_string(device->parent->power.state)); //
// 203 return-ENODEV; //
// 204 }
/
Quoted 6 lines
/
/Whice one is this device(device:1b) parent device ???//
You can check which device is pointed to by the physical_node link in /sys/bus/acpi/devices/.
Why do you think that NVMe is affected?