Skip to contentSkip to conversation

Bug report: nvme :Cannot transition to power state D0 for parent in D3hot

acpi Rafael J. Wysocki 1 participant 1 message Oct 15, 2021 1 message not in the archive ACPI

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 6 lines · Jun Miao

Hi all

bug log:

*  acpi device:1b: Cannot transition to power state D0 for parent in D3hot*

When does this happen?

Quoted 45 lines

*
*

kernel version:

        Linux intel-x86-64 5.15.0-rc4

device info:

root@intel-x86-64:~#lspci:

  02:00.0 Non-Volatile memory controller: Intel Corporation SSD Pro 7600p/760p/E 6100p Series (rev 03)

root@intel-x86-64:~# lspci -vnn -s 02:00.0
02:00.0 Non-Volatile memory controller [0108]: Intel Corporation SSD Pro 7600p/760p/E 6100p Series [8086:f1a6] (rev 03) (prog-if 02 [NVM Express])
    Subsystem: Intel Corporation Intel Corporation SSD Pro 7600p/760p/E 6100p Series [NVM Express] [8086:390b]
    Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0, IOMMU group 11
    Memory at df000000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
    Capabilities: [70] Express Endpoint, MSI 00
    Capabilities: [b0] MSI-X: Enable+ Count=16 Masked-
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [158] Secondary PCI Express
    Capabilities: [178] Latency Tolerance Reporting
    Capabilities: [180] L1 PM Substates
    Kernel driver in use: nvme

kernel source :

drivers/acpi/device_pm.c

/ 197         if (!device->power.flags.ignore_parent && //
// 198             device->parent && (state < device->parent->power.state)) { // // 199 dev_warn(&device->dev, //
// 200                          "Cannot transition to power state %s for parent in %s\n",// // 201 acpi_power_state_string(state), //
// 202 acpi_power_state_string(device->parent->power.state)); //
// 203                 return -ENODEV; //
// 204         }
/

Quoted 6 lines

/
/

Whice one  is this device(device:1b) parent device ???//

You can check which device is pointed to by the physical_node link in /sys/bus/acpi/devices/.

Why do you think that NVMe is affected?