target/riscv: deprecate riscv_cpu_options[]
v2 cover target/riscv: deprecate riscv_cpu_options[]
Hi,
This new version fixes all instances of 'const PropertyInfo' added, changing it to 'static const PropertyInfo', like suggested by Richard in v1.
Patches based on Alistair's riscv-to-apply.next. Series is also found here:
https://gitlab.com/danielhb/qemu/-/tree/fix_cpu_opts_v2
Changes from v1:
- changed 'const PropertyInfo' to 'static const PropertyInfo' in all
relevant patches.
- v1 link: https://lore.kernel.org/qemu-riscv/[email protected]/
Daniel Henrique Barboza (16):
target/riscv/cpu_cfg.h: remove user_spec and bext_spec target/riscv: move 'pmu-mask' and 'pmu-num' to riscv_cpu_properties[] target/riscv: make riscv_cpu_is_generic() public target/riscv: move 'mmu' to riscv_cpu_properties[] target/riscv: move 'pmp' to riscv_cpu_properties[] target/riscv: rework 'priv_spec'
target/riscv: rework 'vext_spec'
target/riscv: move 'vlen' to riscv_cpu_properties[] target/riscv: move 'elen' to riscv_cpu_properties[] target/riscv: create finalize_features() for KVM target/riscv: move 'cbom_blocksize' to riscv_cpu_properties[] target/riscv: move 'cboz_blocksize' to riscv_cpu_properties[] target/riscv: remove riscv_cpu_options[] target/riscv/cpu.c: move 'mvendorid' to riscv_cpu_properties[] target/riscv/cpu.c: move 'mimpid' to riscv_cpu_properties[] target/riscv/cpu.c: move 'marchid' to riscv_cpu_properties[]
target/riscv/cpu.c | 584 +++++++++++++++++++++++++++++------ target/riscv/cpu.h | 7 +- target/riscv/cpu_cfg.h | 4 - target/riscv/kvm/kvm-cpu.c | 94 +++--- target/riscv/kvm/kvm_riscv.h | 1 + target/riscv/tcg/tcg-cpu.c | 63 ---- 6 files changed, 561 insertions(+), 192 deletions(-)
Signature · 1 line
2.43.0
PATCH v2 1/16 target/riscv/cpu_cfg.h: remove user_spec and bext_spec
They aren't being used.
--- target/riscv/cpu_cfg.h | 2 -- 1 file changed, 2 deletions(-)
target/riscv/cpu_cfg.h +0 -2
@@ -136,8 +136,6 @@ struct RISCVCPUConfig {uint32_t pmu_mask;char *priv_spec; -char *user_spec; -char *bext_spec;char *vext_spec;uint16_t vlen;uint16_t elen;
Signature · 1 line
2.43.0
Re: [PATCH v2 01/16] target/riscv/cpu_cfg.h: remove user_spec and bext_spec
22.12.2023 15:22, Daniel Henrique Barboza wrote:>
Quoted 21 lines
They aren't being used.
Signed-off-by Daniel Henrique Barboza <[email protected]>--- target/riscv/cpu_cfg.h | 2 -- 1 file changed, 2 deletions(-)target/riscv/cpu_cfg.h +0
-3@@ -136,8 +136,6 @@ struct RISCVCPUConfig {uint32_t pmu_mask;char *priv_spec; -char *user_spec; -char *bext_spec;char *vext_spec;uint16_t vlen;uint16_t elen; --
Quoted 3 lines
2.43.0
bext_ver from target/riscv/cpu.h is also unused.
PATCH v2 2/16 target/riscv: move 'pmu-mask' and 'pmu-num' to riscv_cpu_properties[]
In reply to Daniel Henrique BarbozaEvery property in riscv_cpu_options[] will be migrated to riscv_cpu_properties[]. This will make their default values init earlier, allowing cpu_init() functions to overwrite them. We'll also implement common getters and setters that both accelerators will use, allowing them to share validations that TCG is doing.
For pmu-mask and pmu-num it's just a matter of migrating the properties from one array to the other. While we're at it, add a 'static' modifier to 'prop_pmu_num' since we're not exporting it.
--- target/riscv/cpu.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
target/riscv/cpu.c +5 -4
@@ -1457,16 +1457,13 @@ static void prop_pmu_num_get(Object *obj, Visitor *v, const char *name,visit_type_uint8 (v, name, &pmu_num, errp); } -const PropertyInfo prop_pmu_num = { +static const PropertyInfo prop_pmu_num = { .name ="pmu-num" , .get = prop_pmu_num_get, .set = prop_pmu_num_set, };Property riscv_cpu_options[] = { -DEFINE_PROP_UINT32 ("pmu-mask" ,RISCVCPU , cfg.pmu_mask,MAKE_64BIT_MASK (3 ,16 )), - {.name ="pmu-num" , .info = &prop_pmu_num},/* Deprecated */ -DEFINE_PROP_BOOL ("mmu" ,RISCVCPU , cfg.mmu, true),DEFINE_PROP_BOOL ("pmp" ,RISCVCPU , cfg.pmp, true),
@@ -1485,6 +1482,10 @@ Property riscv_cpu_options[] = {static Property riscv_cpu_properties[] = {DEFINE_PROP_BOOL ("debug" ,RISCVCPU , cfg.debug, true), +DEFINE_PROP_UINT32 ("pmu-mask" ,RISCVCPU , cfg.pmu_mask, +MAKE_64BIT_MASK (3 ,16 )), + {.name ="pmu-num" , .info = &prop_pmu_num},/* Deprecated */ + #ifndef CONFIG_USER_ONLYDEFINE_PROP_UINT64 ("resetvec" ,RISCVCPU , env.resetvec,DEFAULT_RSTVEC ), #endif
Signature · 1 line
2.43.0
PATCH v2 3/16 target/riscv: make riscv_cpu_is_generic() public
In reply to Daniel Henrique BarbozaWe'll use this function in target/riscv/cpu.c to implement setters that won't allow vendor CPU options to be changed.
--- target/riscv/cpu.c | 5 +++++ target/riscv/cpu.h | 1 + target/riscv/tcg/tcg-cpu.c | 5 ----- 3 files changed, 6 insertions(+), 5 deletions(-)
target/riscv/cpu.c +5 -0
@@ -183,6 +183,11 @@ void isa_ext_update_enabled(RISCVCPU *cpu, uint32_t ext_offset, bool en) *ext_enabled = en; } +bool riscv_cpu_is_generic (Object *cpu_obj) +{ +return object_dynamic_cast (cpu_obj,TYPE_RISCV_DYNAMIC_CPU ) !=NULL ; +} +const char *const riscv_int_regnames[] = {"x0/zero" ,"x1/ra" ,"x2/sp" ,"x3/gp" ,"x4/tp" ,"x5/t0" ,"x6/t1" ,"x7/t2" ,"x8/s0" ,"x9/s1" ,"x10/a0" ,"x11/a1" ,"x12/a2" ,"x13/a3" ,
target/riscv/cpu.h +1 -0
@@ -757,6 +757,7 @@ enum riscv_pmu_event_idx {void isa_ext_update_enabled (RISCVCPU *cpu,uint32_t ext_offset,bool en);bool isa_ext_is_enabled (RISCVCPU *cpu,uint32_t ext_offset);void riscv_cpu_set_misa (CPURISCVState *env,RISCVMXL mxl,uint32_t ext); +bool riscv_cpu_is_generic (Object *cpu_obj); typedef struct RISCVCPUMultiExtConfig { const char *name;
target/riscv/tcg/tcg-cpu.c +0 -5
@@ -658,11 +658,6 @@ bool riscv_cpu_tcg_compatible(RISCVCPU *cpu)return object_dynamic_cast (OBJECT (cpu),TYPE_RISCV_CPU_HOST ) ==NULL ; } -static bool riscv_cpu_is_generic (Object *cpu_obj) -{ -return object_dynamic_cast (cpu_obj,TYPE_RISCV_DYNAMIC_CPU ) !=NULL ; -} -/* * We'll get here via the following path: *
Signature · 1 line
2.43.0
PATCH v2 4/16 target/riscv: move 'mmu' to riscv_cpu_properties[]
In reply to Daniel Henrique BarbozaCommit 7f0bdfb5bfc ("target/riscv/cpu.c: remove cfg setup from riscv_cpu_init()") already did some of the work by making some cpu_init() functions to explictly enable their own 'mmu' default.
The generic CPUs didn't get update by that commit, so they are still relying on the defaults set by the 'mmu' option. But having 'mmu' and 'pmp' being default=true will force CPUs that doesn't implement these options to set them to 'false' in their cpu_init(), which isn't ideal.
We'll move 'mmu' to riscv_cpu_properties[] without any defaults, i.e. the default will be 'false'. Compensate it by manually setting 'mmu = true' to the generic CPUs that requires it.
Implement a setter for it to forbid the 'mmu' setting to be changed for vendor CPUs. This will allow the option to exist for all CPUs and, at the same time, protect vendor CPUs from undesired changes:
$ ./build/qemu-system-riscv64 -M virt -cpu sifive-e51,mmu=true qemu-system-riscv64: can't apply global sifive-e51-riscv-cpu.mmu=true: CPU 'sifive-e51' does not allow changing the value of 'mmu'
--- target/riscv/cpu.c | 67 +++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 63 insertions(+), 4 deletions(-)
target/riscv/cpu.c +63 -4
@@ -410,6 +410,8 @@ static void riscv_max_cpu_init(Object *obj)CPURISCVState *env = &cpu->env;RISCVMXL mlx =MXL_RV64 ; + cpu->cfg.mmu = true; +#ifdef TARGET_RISCV32 mlx =MXL_RV32 ;#endif
@@ -424,7 +426,11 @@ static void riscv_max_cpu_init(Object *obj)#if defined(TARGET_RISCV64 )static void rv64_base_cpu_init (Object *obj) { -CPURISCVState *env = &RISCV_CPU (obj)->env; +RISCVCPU *cpu =RISCV_CPU (obj); +CPURISCVState *env = &cpu->env; + + cpu->cfg.mmu = true; +/* We set this in the realise function */ riscv_cpu_set_misa (env,MXL_RV64 ,0 );/* Set latest version of privileged specification */
@@ -542,13 +548,18 @@ static void rv64_veyron_v1_cpu_init(Object *obj)static void rv128_base_cpu_init (Object *obj) { +RISCVCPU *cpu =RISCV_CPU (obj); +CPURISCVState *env = &cpu->env; +if (qemu_tcg_mttcg_enabled ()) {/* Missing 128-bit aligned atomics */ error_report ("128-bit RISC-V currently does not work with Multi " "Threaded TCG. Please use: -accel tcg,thread=single" );exit (EXIT_FAILURE ); } -CPURISCVState *env = &RISCV_CPU (obj)->env; + + cpu->cfg.mmu = true; +/* We set this in the realise function */ riscv_cpu_set_misa (env,MXL_RV128 ,0 );/* Set latest version of privileged specification */
@@ -560,7 +571,11 @@ static void rv128_base_cpu_init(Object *obj)#else static void rv32_base_cpu_init (Object *obj) { -CPURISCVState *env = &RISCV_CPU (obj)->env; +RISCVCPU *cpu =RISCV_CPU (obj); +CPURISCVState *env = &cpu->env; + + cpu->cfg.mmu = true; +/* We set this in the realise function */ riscv_cpu_set_misa (env,MXL_RV32 ,0 );/* Set latest version of privileged specification */
@@ -1431,6 +1446,19 @@ const RISCVCPUMultiExtConfig riscv_cpu_deprecated_exts[] = { DEFINE_PROP_END_OF_LIST(), }; +static bool riscv_cpu_is_vendor (Object *obj) +{ +return !riscv_cpu_is_generic (obj); +} + +static void cpu_set_prop_err (RISCVCPU *cpu,const char *propname, +Error **errp) +{ + g_autofree char *cpuname = riscv_cpu_get_name(cpu); +error_setg (errp,"CPU '%s' does not allow changing the value of '%s'" , + cpuname, propname); +} +static void prop_pmu_num_set (Object *obj,Visitor *v,const char *name,void *opaque,Error **errp) {
@@ -1468,8 +1496,37 @@ static const PropertyInfo prop_pmu_num = { .set = prop_pmu_num_set, }; +static void prop_mmu_set (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +RISCVCPU *cpu =RISCV_CPU (obj); +bool value; + +visit_type_bool (v, name, &value, errp); + +if (cpu->cfg.mmu != value &&riscv_cpu_is_vendor (obj)) { +cpu_set_prop_err (cpu,"mmu" , errp); +return ; + } + + cpu->cfg.mmu = value; +} + +static void prop_mmu_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +bool value =RISCV_CPU (obj)->cfg.mmu; + +visit_type_bool (v, name, &value, errp); +} + +static const PropertyInfo prop_mmu = { + .name ="mmu" , + .get = prop_mmu_get, + .set = prop_mmu_set, +}; +Property riscv_cpu_options[] = { -DEFINE_PROP_BOOL ("mmu" ,RISCVCPU , cfg.mmu, true),DEFINE_PROP_BOOL ("pmp" ,RISCVCPU , cfg.pmp, true),DEFINE_PROP_STRING ("priv_spec" ,RISCVCPU , cfg.priv_spec),
@@ -1491,6 +1548,8 @@ static Property riscv_cpu_properties[] = { MAKE_64BIT_MASK(3, 16)), {.name = "pmu-num", .info = &prop_pmu_num}, /* Deprecated */ + {.name = "mmu", .info = &prop_mmu}, +#ifndef CONFIG_USER_ONLY DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC),#endif
Signature · 1 line
2.43.0
PATCH v2 5/16 target/riscv: move 'pmp' to riscv_cpu_properties[]
In reply to Daniel Henrique BarbozaMove 'pmp' to riscv_cpu_properties[], creating a new setter() for it that forbids 'pmp' to be changed in vendor CPUs, like we did with the 'mmu' option.
We'll also have to manually set 'pmp = true' to generic CPUs that were still relying on the previous default to set it.
--- target/riscv/cpu.c | 37 +++++++++++++++++++++++++++++++++++-- 1 file changed, 35 insertions(+), 2 deletions(-)
target/riscv/cpu.c +35 -2
@@ -411,6 +411,7 @@ static void riscv_max_cpu_init(Object *obj)RISCVMXL mlx =MXL_RV64 ; cpu->cfg.mmu = true; + cpu->cfg.pmp = true;#ifdef TARGET_RISCV32 mlx =MXL_RV32 ;
@@ -430,6 +431,7 @@ static void rv64_base_cpu_init(Object *obj)CPURISCVState *env = &cpu->env; cpu->cfg.mmu = true; + cpu->cfg.pmp = true;/* We set this in the realise function */ riscv_cpu_set_misa (env,MXL_RV64 ,0 );
@@ -559,6 +561,7 @@ static void rv128_base_cpu_init(Object *obj) } cpu->cfg.mmu = true; + cpu->cfg.pmp = true;/* We set this in the realise function */ riscv_cpu_set_misa (env,MXL_RV128 ,0 );
@@ -575,6 +578,7 @@ static void rv32_base_cpu_init(Object *obj)CPURISCVState *env = &cpu->env; cpu->cfg.mmu = true; + cpu->cfg.pmp = true;/* We set this in the realise function */ riscv_cpu_set_misa (env,MXL_RV32 ,0 );
@@ -1526,9 +1530,37 @@ static const PropertyInfo prop_mmu = { .set = prop_mmu_set, }; -Property riscv_cpu_options[] = { -DEFINE_PROP_BOOL ("pmp" ,RISCVCPU , cfg.pmp, true), +static void prop_pmp_set (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +RISCVCPU *cpu =RISCV_CPU (obj); +bool value; + +visit_type_bool (v, name, &value, errp); +if (cpu->cfg.pmp != value &&riscv_cpu_is_vendor (obj)) { +cpu_set_prop_err (cpu, name, errp); +return ; + } + + cpu->cfg.pmp = value; +} + +static void prop_pmp_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +bool value =RISCV_CPU (obj)->cfg.pmp; + +visit_type_bool (v, name, &value, errp); +} + +static const PropertyInfo prop_pmp = { + .name ="pmp" , + .get = prop_pmp_get, + .set = prop_pmp_set, +}; + +Property riscv_cpu_options[] = {DEFINE_PROP_STRING ("priv_spec" ,RISCVCPU , cfg.priv_spec),DEFINE_PROP_STRING ("vext_spec" ,RISCVCPU , cfg.vext_spec),
@@ -1549,6 +1581,7 @@ static Property riscv_cpu_properties[] = { {.name = "pmu-num", .info = &prop_pmu_num}, /* Deprecated */ {.name = "mmu", .info = &prop_mmu}, + {.name = "pmp", .info = &prop_pmp},#ifndef CONFIG_USER_ONLY DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC),
Signature · 1 line
2.43.0
PATCH v2 6/16 target/riscv: rework 'priv_spec'
In reply to Daniel Henrique Barboza'priv_spec' and 'vext_spec' are two string options used as a fancy way of setting integers in the CPU state (cpu->env.priv_ver and cpu->env.vext_ver). It requires us to deal with string parsing and to store them in cpu_cfg.
We must support these string options, but we don't need to store them. We have a precedence for this kind of arrangement in target/ppc/compat.c, ppc_compat_prop_get|set, getters and setters used for the 'max-cpu-compat' class property of the pseries ppc64 machine. We'll do the same with both 'priv_spec' and 'vext_spec'.
For 'priv_spec', the validation from riscv_cpu_validate_priv_spec() will be done by the prop_priv_spec_set() setter, while also preventing it to be changed for vendor CPUs. Add two helpers that converts env->priv_ver back and forth to its string representation. These helpers allow us to get a string and set 'env->priv_ver' and return a string giving the current env->priv_ver value. In other words, make the cpu->cfg.priv_spec string obsolete.
Last but not the least, move the reworked 'priv_spec' option to riscv_cpu_properties[].
After all said and done, we don't need to store the 'priv_spec' string in the CPU state, and we're now protecting vendor CPUs from priv_ver changes:
$ ./build/qemu-system-riscv64 -M virt -cpu sifive-e51,priv_spec="v1.12.0"
qemu-system-riscv64: can't apply global sifive-e51-riscv-cpu.priv_spec=v1.12.0:
CPU 'sifive-e51' does not allow changing the value of 'priv_spec'
Current 'priv_spec' val: v1.10.0
$--- target/riscv/cpu.c | 72 +++++++++++++++++++++++++++++++++++++- target/riscv/cpu.h | 3 ++ target/riscv/cpu_cfg.h | 1 - target/riscv/tcg/tcg-cpu.c | 29 --------------- 4 files changed, 74 insertions(+), 31 deletions(-)
target/riscv/cpu.c +71 -1
@@ -1560,8 +1560,76 @@ static const PropertyInfo prop_pmp = { .set = prop_pmp_set, }; +static int priv_spec_from_str (const char *priv_spec_str) +{ +int priv_version =-1 ; + +if (!g_strcmp0 (priv_spec_str,PRIV_VER_1_12_0_STR )) { + priv_version =PRIV_VERSION_1_12_0 ; + }else if (!g_strcmp0 (priv_spec_str,PRIV_VER_1_11_0_STR )) { + priv_version =PRIV_VERSION_1_11_0 ; + }else if (!g_strcmp0 (priv_spec_str,PRIV_VER_1_10_0_STR )) { + priv_version =PRIV_VERSION_1_10_0 ; + } + +return priv_version; +} + +static const char *priv_spec_to_str (int priv_version) +{ +switch (priv_version) { +case PRIV_VERSION_1_10_0 : +return PRIV_VER_1_10_0_STR ; +case PRIV_VERSION_1_11_0 : +return PRIV_VER_1_11_0_STR ; +case PRIV_VERSION_1_12_0 : +return PRIV_VER_1_12_0_STR ; +default : +return NULL ; + } +} + +static void prop_priv_spec_set (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +RISCVCPU *cpu =RISCV_CPU (obj); + g_autofree char *value = NULL; +int priv_version =-1 ; + +visit_type_str (v, name, &value, errp); + + priv_version =priv_spec_from_str (value); +if (priv_version <0 ) { +error_setg (errp,"Unsupported privilege spec version '%s'" , value); +return ; + } + +if (priv_version != cpu->env.priv_ver &&riscv_cpu_is_vendor (obj)) { +cpu_set_prop_err (cpu, name, errp); +error_append_hint (errp,"Current '%s' val: %s\n" , name, +object_property_get_str (obj, name,NULL )); +return ; + } + + cpu->env.priv_ver = priv_version; +} + +static void prop_priv_spec_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +RISCVCPU *cpu =RISCV_CPU (obj); +const char *value =priv_spec_to_str (cpu->env.priv_ver); + +visit_type_str (v, name, (char **)&value, errp); +} + +static const PropertyInfo prop_priv_spec = { + .name ="priv_spec" , + .get = prop_priv_spec_get, + .set = prop_priv_spec_set, +}; +Property riscv_cpu_options[] = { -DEFINE_PROP_STRING ("priv_spec" ,RISCVCPU , cfg.priv_spec),DEFINE_PROP_STRING ("vext_spec" ,RISCVCPU , cfg.vext_spec),DEFINE_PROP_UINT16 ("vlen" ,RISCVCPU , cfg.vlen,128 ),
@@ -1583,6 +1651,8 @@ static Property riscv_cpu_properties[] = { {.name = "mmu", .info = &prop_mmu}, {.name = "pmp", .info = &prop_pmp}, + {.name = "priv_spec", .info = &prop_priv_spec}, +#ifndef CONFIG_USER_ONLY DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC),#endif
target/riscv/cpu.h +3 -0
@@ -77,6 +77,9 @@ const char *riscv_get_misa_ext_description(uint32_t bit);#define CPU_CFG_OFFSET (_prop) offsetof(struct RISCVCPUConfig, _prop)/* Privileged specification version */ +#define PRIV_VER_1_10_0_STR "v1.10.0" +#define PRIV_VER_1_11_0_STR "v1.11.0" +#define PRIV_VER_1_12_0_STR "v1.12.0"enum {PRIV_VERSION_1_10_0 =0 ,PRIV_VERSION_1_11_0 ,
target/riscv/cpu_cfg.h +0 -1
@@ -135,7 +135,6 @@ struct RISCVCPUConfig {bool ext_XVentanaCondOps;uint32_t pmu_mask; -char *priv_spec;char *vext_spec;uint16_t vlen;uint16_t elen;
target/riscv/tcg/tcg-cpu.c +0 -29
@@ -175,29 +175,6 @@ static void riscv_cpu_validate_misa_mxl(RISCVCPU *cpu, Error **errp) } } -static void riscv_cpu_validate_priv_spec (RISCVCPU *cpu,Error **errp) -{ -CPURISCVState *env = &cpu->env; -int priv_version =-1 ; - -if (cpu->cfg.priv_spec) { -if (!g_strcmp0 (cpu->cfg.priv_spec,"v1.12.0" )) { - priv_version =PRIV_VERSION_1_12_0 ; - }else if (!g_strcmp0 (cpu->cfg.priv_spec,"v1.11.0" )) { - priv_version =PRIV_VERSION_1_11_0 ; - }else if (!g_strcmp0 (cpu->cfg.priv_spec,"v1.10.0" )) { - priv_version =PRIV_VERSION_1_10_0 ; - }else { -error_setg (errp, -"Unsupported privilege spec version '%s'" , - cpu->cfg.priv_spec); -return ; - } - - env->priv_ver = priv_version; - } -} -static void riscv_cpu_validate_v (CPURISCVState *env,RISCVCPUConfig *cfg,Error **errp) {
@@ -625,12 +602,6 @@ void riscv_tcg_cpu_finalize_features(RISCVCPU *cpu, Error **errp)CPURISCVState *env = &cpu->env;Error *local_err =NULL ; -riscv_cpu_validate_priv_spec (cpu, &local_err); -if (local_err !=NULL ) { -error_propagate (errp, local_err); -return ; - } -riscv_cpu_validate_misa_priv (env, &local_err);if (local_err !=NULL ) {error_propagate (errp, local_err);
Signature · 1 line
2.43.0
PATCH v2 7/16 target/riscv: rework 'vext_spec'
In reply to Daniel Henrique BarbozaThe same rework did in 'priv_spec' is done for 'vext_spec'. This time is simpler, since we only accept one value ("v1.0") and we'll always have env->vext_ver set to VEXT_VERSION_1_00_0, thus we don't need helpers to convert string to 'vext_ver' back and forth like we needed for 'priv_spec'.
--- target/riscv/cpu.c | 42 ++++++++++++++++++++++++++++++++++---- target/riscv/cpu.h | 1 + target/riscv/cpu_cfg.h | 1 - target/riscv/tcg/tcg-cpu.c | 15 -------------- 4 files changed, 39 insertions(+), 20 deletions(-)
target/riscv/cpu.c +38 -4
@@ -1237,6 +1237,8 @@ static void riscv_cpu_post_init(Object *obj)static void riscv_cpu_init (Object *obj) { +RISCVCPU *cpu =RISCV_CPU (obj); +#ifndef CONFIG_USER_ONLY qdev_init_gpio_in (DEVICE (obj), riscv_cpu_set_irq,IRQ_LOCAL_MAX +IRQ_LOCAL_GUEST_MAX );
@@ -1249,8 +1251,11 @@ static void riscv_cpu_init(Object *obj)* for all CPUs. Each accelerator will decide what to do when * users disable them. */ -RISCV_CPU (obj)->cfg.ext_zicntr = true; -RISCV_CPU (obj)->cfg.ext_zihpm = true; + cpu->cfg.ext_zicntr = true; + cpu->cfg.ext_zihpm = true; + +/* vext_spec is always 1_00_0 */ + cpu->env.vext_ver =VEXT_VERSION_1_00_0 ; } typedef struct misa_ext_info {
@@ -1629,9 +1634,37 @@ static const PropertyInfo prop_priv_spec = { .set = prop_priv_spec_set, }; -Property riscv_cpu_options[] = { -DEFINE_PROP_STRING ("vext_spec" ,RISCVCPU , cfg.vext_spec), +static void prop_vext_spec_set (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +RISCVCPU *cpu =RISCV_CPU (obj); + g_autofree char *value = NULL; + +visit_type_str (v, name, &value, errp); + +if (!g_strcmp0 (value,VEXT_VER_1_00_0_STR )) { +error_setg (errp,"Unsupported vector spec version '%s'" , value); +return ; + } + + cpu->env.vext_ver =VEXT_VERSION_1_00_0 ; +} + +static void prop_vext_spec_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +const char *value =VEXT_VER_1_00_0_STR ; +visit_type_str (v, name, (char **)&value, errp); +} + +static const PropertyInfo prop_vext_spec = { + .name ="vext_spec" , + .get = prop_vext_spec_get, + .set = prop_vext_spec_set, +}; + +Property riscv_cpu_options[] = {DEFINE_PROP_UINT16 ("vlen" ,RISCVCPU , cfg.vlen,128 ),DEFINE_PROP_UINT16 ("elen" ,RISCVCPU , cfg.elen,64 ),
@@ -1652,6 +1685,7 @@ static Property riscv_cpu_properties[] = { {.name = "pmp", .info = &prop_pmp}, {.name = "priv_spec", .info = &prop_priv_spec}, + {.name = "vext_spec", .info = &prop_vext_spec},#ifndef CONFIG_USER_ONLY DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC),
target/riscv/cpu.h +1 -0
@@ -89,6 +89,7 @@ enum { };#define VEXT_VERSION_1_00_0 0x00010000 +#define VEXT_VER_1_00_0_STR "v1.0"enum {TRANSLATE_SUCCESS ,
target/riscv/cpu_cfg.h +0 -1
@@ -135,7 +135,6 @@ struct RISCVCPUConfig {bool ext_XVentanaCondOps;uint32_t pmu_mask; -char *vext_spec;uint16_t vlen;uint16_t elen;uint16_t cbom_blocksize;
target/riscv/tcg/tcg-cpu.c +0 -15
@@ -201,21 +201,6 @@ static void riscv_cpu_validate_v(CPURISCVState *env, RISCVCPUConfig *cfg, "in the range [8, 64]");return ; } - -if (cfg->vext_spec) { -if (!g_strcmp0 (cfg->vext_spec,"v1.0" )) { - env->vext_ver =VEXT_VERSION_1_00_0 ; - }else { -error_setg (errp,"Unsupported vector spec version '%s'" , - cfg->vext_spec); -return ; - } - }else if (env->vext_ver ==0 ) { -qemu_log ("vector version is not specified, " -"use the default value v1.0\n" ); - - env->vext_ver =VEXT_VERSION_1_00_0 ; - } }static void riscv_cpu_disable_priv_spec_isa_exts (RISCVCPU *cpu)
Signature · 1 line
2.43.0
Re: [PATCH v2 07/16] target/riscv: rework 'vext_spec'
Quoted 49 lines · Daniel Henrique Barboza
The same rework did in '
priv_spec' is done for 'vext_spec'. This time is simpler, since we only accept one value ("v1.0") and we'll always haveenv->vext_verset toVEXT_VERSION_1_00_0, thus we don't need helpers to convert string to 'vext_ver' back and forth like we needed for 'priv_spec'.Signed-off-by Daniel Henrique Barboza <[email protected]>--- target/riscv/cpu.c | 42 ++++++++++++++++++++++++++++++++++---- target/riscv/cpu.h | 1 + target/riscv/cpu_cfg.h | 1 - target/riscv/tcg/tcg-cpu.c | 15 -------------- 4 files changed, 39 insertions(+), 20 deletions(-)target/riscv/cpu.c +9
-4@@ -1237,6 +1237,8 @@ static void riscv_cpu_post_init(Object *obj)static void riscv_cpu_init (Object *obj) { +RISCVCPU *cpu =RISCV_CPU (obj); +#ifndef CONFIG_USER_ONLY qdev_init_gpio_in (DEVICE (obj), riscv_cpu_set_irq,IRQ_LOCAL_MAX +IRQ_LOCAL_GUEST_MAX );@@ -1249,8 +1251,11 @@ static void riscv_cpu_init(Object *obj)* for all CPUs. Each accelerator will decide what to do when * users disable them. */ -RISCV_CPU (obj)->cfg.ext_zicntr = true; -RISCV_CPU (obj)->cfg.ext_zihpm = true; + cpu->cfg.ext_zicntr = true; + cpu->cfg.ext_zihpm = true; + +/* vext_spec is always 1_00_0 */ + cpu->env.vext_ver =VEXT_VERSION_1_00_0 ; } typedef struct misa_ext_info {@@ -1629,9 +1634,37 @@ static const PropertyInfo prop_priv_spec = { .set = prop_priv_spec_set, }; -Property riscv_cpu_options[] = { -DEFINE_PROP_STRING ("vext_spec" ,RISCVCPU , cfg.vext_spec), +static void prop_vext_spec_set (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp)
target/riscv/cpu.c static const PropertyInfo prop_priv_spec = { · line 1648
Quoted 10 lines
target/riscv/cpu.c +10
-0+{ +RISCVCPU *cpu =RISCV_CPU (obj); + g_autofree char *value = NULL; + +visit_type_str (v, name, &value, errp); + +if (!g_strcmp0 (value,VEXT_VER_1_00_0_STR )) { +error_setg (errp,"Unsupported vector spec version '%s'" , value); +return ; + }
This bit is wrong. We'll error out if vext_spec == "v1.0" instead of vext_spec != "v1.0".
I fixed it for v3. I'll wait for more reviews to avoid flooding the ML during the holidays.
Thanks,
Daniel
Quoted 80 lines
target/riscv/cpu.c +19
-0+ + cpu->env.vext_ver =VEXT_VERSION_1_00_0 ; +} + +static void prop_vext_spec_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +const char *value =VEXT_VER_1_00_0_STR ; +visit_type_str (v, name, (char **)&value, errp); +} + +static const PropertyInfo prop_vext_spec = { + .name ="vext_spec" , + .get = prop_vext_spec_get, + .set = prop_vext_spec_set, +}; + +Property riscv_cpu_options[] = {DEFINE_PROP_UINT16 ("vlen" ,RISCVCPU , cfg.vlen,128 ),DEFINE_PROP_UINT16 ("elen" ,RISCVCPU , cfg.elen,64 ),@@ -1652,6 +1685,7 @@ static Property riscv_cpu_properties[] = { {.name = "pmp", .info = &prop_pmp}, {.name = "priv_spec", .info = &prop_priv_spec}, + {.name = "vext_spec", .info = &prop_vext_spec},#ifndef CONFIG_USER_ONLY DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC),target/riscv/cpu.h +1
-0@@ -89,6 +89,7 @@ enum { };#define VEXT_VERSION_1_00_0 0x00010000 +#define VEXT_VER_1_00_0_STR "v1.0"enum {TRANSLATE_SUCCESS ,target/riscv/cpu_cfg.h +0
-1@@ -135,7 +135,6 @@ struct RISCVCPUConfig {bool ext_XVentanaCondOps;uint32_t pmu_mask; -char *vext_spec;uint16_t vlen;uint16_t elen;uint16_t cbom_blocksize;target/riscv/tcg/tcg-cpu.c +0
-15@@ -201,21 +201,6 @@ static void riscv_cpu_validate_v(CPURISCVState *env, RISCVCPUConfig *cfg, "in the range [8, 64]");return ; } - -if (cfg->vext_spec) { -if (!g_strcmp0 (cfg->vext_spec,"v1.0" )) { - env->vext_ver =VEXT_VERSION_1_00_0 ; - }else { -error_setg (errp,"Unsupported vector spec version '%s'" , - cfg->vext_spec); -return ; - } - }else if (env->vext_ver ==0 ) { -qemu_log ("vector version is not specified, " -"use the default value v1.0\n" ); - - env->vext_ver =VEXT_VERSION_1_00_0 ; - } }static void riscv_cpu_disable_priv_spec_isa_exts (RISCVCPU *cpu)
PATCH v2 8/16 target/riscv: move 'vlen' to riscv_cpu_properties[]
In reply to Daniel Henrique BarbozaTurning 'vlen' into a class property will allow its default value to be overwritten by cpu_init() later on, solving the issue we have now where CPU specific settings are getting overwritten by the default.
For 'vlen', 'elen' and the blocksize options we need a way of tracking if the user set a value for them. This is benign for TCG since the cost of always validating these values are small, but for KVM we need syscalls to read the host values to make the validations. Knowing whether the user didn't touch the values makes a difference. We'll track user setting for these properties using a hash, like we do in the TCG driver.
Common validation bits are moved from riscv_cpu_validate_v() to prop_vlen_set() to be shared with KVM.
And, as done with every option we migrated to riscv_cpu_properties[], vendor CPUs can't have their 'vlen' value changed.
--- target/riscv/cpu.c | 63 +++++++++++++++++++++++++++++++++++++- target/riscv/tcg/tcg-cpu.c | 5 --- 2 files changed, 62 insertions(+), 6 deletions(-)
target/riscv/cpu.c +62 -1
@@ -29,6 +29,7 @@#include "qapi/visitor.h" #include "qemu/error-report.h" #include "hw/qdev-properties.h" +#include "hw/core/qdev-prop-internal.h" #include "migration/vmstate.h" #include "fpu/softfloat-helpers.h" #include "sysemu/kvm.h"
@@ -53,6 +54,15 @@ const uint32_t misa_bits[] = {RVI, RVE, RVM, RVA, RVF, RVD, RVV,#define BYTE (x) (x)#endif +/* Hash that stores general user set numeric options */ +static GHashTable *general_user_opts; + +static void cpu_option_add_user_setting (const char *optname,uint32_t value) +{ +g_hash_table_insert (general_user_opts, (gpointer )optname, +GUINT_TO_POINTER (value)); +} +#define ISA_EXT_DATA_ENTRY (_name, _min_ver, _prop) \ {#_name, _min_ver, CPU_CFG_OFFSET(_prop)}
@@ -1244,6 +1254,8 @@ static void riscv_cpu_init(Object *obj) IRQ_LOCAL_MAX + IRQ_LOCAL_GUEST_MAX);#endif /* CONFIG_USER_ONLY */ + general_user_opts =g_hash_table_new (g_str_hash, g_str_equal); +/* * The timer and performance counters extensions were supported * in QEMU before they were added as discrete extensions in the
@@ -1664,8 +1676,54 @@ static const PropertyInfo prop_vext_spec = { .set = prop_vext_spec_set, }; +static void prop_vlen_set (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +RISCVCPU *cpu =RISCV_CPU (obj); +uint16_t value; + +if (!visit_type_uint16 (v, name, &value, errp)) { +return ; + } + +if (!is_power_of_2 (value)) { +error_setg (errp,"Vector extension VLEN must be power of 2" ); +return ; + } + +/* Always allow setting a default value */ +if (cpu->cfg.vlen ==0 ) { + cpu->cfg.vlen = value; +return ; + } + +if (value != cpu->cfg.vlen &&riscv_cpu_is_vendor (obj)) { +cpu_set_prop_err (cpu, name, errp); +error_append_hint (errp,"Current '%s' val: %u\n" , + name, cpu->cfg.vlen); +return ; + } + +cpu_option_add_user_setting (name, value); + cpu->cfg.vlen = value; +} + +static void prop_vlen_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +uint16_t value =RISCV_CPU (obj)->cfg.vlen; + +visit_type_uint16 (v, name, &value, errp); +} + +static const PropertyInfo prop_vlen = { + .name ="vlen" , + .get = prop_vlen_get, + .set = prop_vlen_set, + .set_default_value = qdev_propinfo_set_default_value_uint, +}; +Property riscv_cpu_options[] = { -DEFINE_PROP_UINT16 ("vlen" ,RISCVCPU , cfg.vlen,128 ),DEFINE_PROP_UINT16 ("elen" ,RISCVCPU , cfg.elen,64 ),DEFINE_PROP_UINT16 ("cbom_blocksize" ,RISCVCPU , cfg.cbom_blocksize,64 ),
@@ -1687,6 +1745,9 @@ static Property riscv_cpu_properties[] = { {.name = "priv_spec", .info = &prop_priv_spec}, {.name = "vext_spec", .info = &prop_vext_spec}, + {.name = "vlen", .info = &prop_vlen, + .set_default = true, .defval.u = 128}, +#ifndef CONFIG_USER_ONLY DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC),#endif
target/riscv/tcg/tcg-cpu.c +0 -5
@@ -178,11 +178,6 @@ static void riscv_cpu_validate_misa_mxl(RISCVCPU *cpu, Error **errp)static void riscv_cpu_validate_v (CPURISCVState *env,RISCVCPUConfig *cfg,Error **errp) { -if (!is_power_of_2 (cfg->vlen)) { -error_setg (errp,"Vector extension VLEN must be power of 2" ); -return ; - } -if (cfg->vlen >RV_VLEN_MAX || cfg->vlen <128 ) {error_setg (errp, "Vector extension implementation only supports VLEN "
Signature · 1 line
2.43.0
Re: [PATCH v2 08/16] target/riscv: move 'vlen' to riscv_cpu_properties[]
Quoted 71 lines · Daniel Henrique Barboza
Turning 'vlen' into a class property will allow its default value to be overwritten by
cpu_init()later on, solving the issue we have now where CPU specific settings are getting overwritten by the default.For 'vlen', 'elen' and the blocksize options we need a way of tracking if the user set a value for them. This is benign for TCG since the cost of always validating these values are small, but for KVM we need syscalls to read the host values to make the validations. Knowing whether the user didn't touch the values makes a difference. We'll track user setting for these properties using a hash, like we do in the TCG driver.
Common validation bits are moved from
riscv_cpu_validate_v()toprop_vlen_set()to be shared with KVM.And, as done with every option we migrated to riscv_cpu_properties[], vendor CPUs can't have their 'vlen' value changed.
Signed-off-by Daniel Henrique Barboza <[email protected]>--- target/riscv/cpu.c | 63 +++++++++++++++++++++++++++++++++++++- target/riscv/tcg/tcg-cpu.c | 5 --- 2 files changed, 62 insertions(+), 6 deletions(-)target/riscv/cpu.c +18
-0@@ -29,6 +29,7 @@#include "qapi/visitor.h" #include "qemu/error-report.h" #include "hw/qdev-properties.h" +#include "hw/core/qdev-prop-internal.h" #include "migration/vmstate.h" #include "fpu/softfloat-helpers.h" #include "sysemu/kvm.h" @@ -53,6 +54,15 @@ const uint32_t misa_bits[] = {RVI, RVE, RVM, RVA, RVF, RVD, RVV,#define BYTE (x) (x)#endif +/* Hash that stores general user set numeric options */ +static GHashTable *general_user_opts; + +static void cpu_option_add_user_setting (const char *optname,uint32_t value) +{ +g_hash_table_insert (general_user_opts, (gpointer )optname, +GUINT_TO_POINTER (value)); +} +#define ISA_EXT_DATA_ENTRY (_name, _min_ver, _prop) \ {#_name, _min_ver, CPU_CFG_OFFSET(_prop)}@@ -1244,6 +1254,8 @@ static void riscv_cpu_init(Object *obj) IRQ_LOCAL_MAX + IRQ_LOCAL_GUEST_MAX);#endif /* CONFIG_USER_ONLY */ + general_user_opts =g_hash_table_new (g_str_hash, g_str_equal); +/* * The timer and performance counters extensions were supported * in QEMU before they were added as discrete extensions in the @@ -1664,8 +1676,54 @@ static const PropertyInfo prop_vext_spec = { .set = prop_vext_spec_set, }; +static void prop_vlen_set (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +RISCVCPU *cpu =RISCV_CPU (obj); +uint16_t value; +
target/riscv/cpu.c static const PropertyInfo prop_vext_spec = { · line 1694
Quoted 10 lines
target/riscv/cpu.c +10
-0+if (!visit_type_uint16 (v, name, &value, errp)) { +return ; + } + +if (!is_power_of_2 (value)) { +error_setg (errp,"Vector extension VLEN must be power of 2" ); +return ; + } + +/* Always allow setting a default value */
What is the case for vlen equal to 0? Since in properties it is defined with default value set to 128.
Quoted 66 lines
target/riscv/cpu.c +34
-1+if (cpu->cfg.vlen ==0 ) { + cpu->cfg.vlen = value; +return ; + } + +if (value != cpu->cfg.vlen &&riscv_cpu_is_vendor (obj)) { +cpu_set_prop_err (cpu, name, errp); +error_append_hint (errp,"Current '%s' val: %u\n" , + name, cpu->cfg.vlen); +return ; + } + +cpu_option_add_user_setting (name, value); + cpu->cfg.vlen = value; +} + +static void prop_vlen_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +uint16_t value =RISCV_CPU (obj)->cfg.vlen; + +visit_type_uint16 (v, name, &value, errp); +} + +static const PropertyInfo prop_vlen = { + .name ="vlen" , + .get = prop_vlen_get, + .set = prop_vlen_set, + .set_default_value = qdev_propinfo_set_default_value_uint, +}; +Property riscv_cpu_options[] = { -DEFINE_PROP_UINT16 ("vlen" ,RISCVCPU , cfg.vlen,128 ),DEFINE_PROP_UINT16 ("elen" ,RISCVCPU , cfg.elen,64 ),DEFINE_PROP_UINT16 ("cbom_blocksize" ,RISCVCPU , cfg.cbom_blocksize,64 ),@@ -1687,6 +1745,9 @@ static Property riscv_cpu_properties[] = { {.name = "priv_spec", .info = &prop_priv_spec}, {.name = "vext_spec", .info = &prop_vext_spec}, + {.name = "vlen", .info = &prop_vlen, + .set_default = true, .defval.u = 128}, +#ifndef CONFIG_USER_ONLY DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC),#endif target/riscv/tcg/tcg-cpu.c +0
-6@@ -178,11 +178,6 @@ static void riscv_cpu_validate_misa_mxl(RISCVCPU *cpu, Error **errp)static void riscv_cpu_validate_v (CPURISCVState *env,RISCVCPUConfig *cfg,Error **errp) { -if (!is_power_of_2 (cfg->vlen)) { -error_setg (errp,"Vector extension VLEN must be power of 2" ); -return ; - } -if (cfg->vlen >RV_VLEN_MAX || cfg->vlen <128 ) {error_setg (errp, "Vector extension implementation only supports VLEN " --2.43.0
Re: [PATCH v2 08/16] target/riscv: move 'vlen' to riscv_cpu_properties[]
Quoted 76 lines · Vladimir Isaev
Quoted 75 lines · Daniel Henrique Barboza
Turning 'vlen' into a class property will allow its default value to be overwritten by
cpu_init()later on, solving the issue we have now where CPU specific settings are getting overwritten by the default.For 'vlen', 'elen' and the blocksize options we need a way of tracking if the user set a value for them. This is benign for TCG since the cost of always validating these values are small, but for KVM we need syscalls to read the host values to make the validations. Knowing whether the user didn't touch the values makes a difference. We'll track user setting for these properties using a hash, like we do in the TCG driver.
Common validation bits are moved from
riscv_cpu_validate_v()toprop_vlen_set()to be shared with KVM.And, as done with every option we migrated to riscv_cpu_properties[], vendor CPUs can't have their 'vlen' value changed.
Signed-off-by Daniel Henrique Barboza <[email protected]>--- target/riscv/cpu.c | 63 +++++++++++++++++++++++++++++++++++++- target/riscv/tcg/tcg-cpu.c | 5 --- 2 files changed, 62 insertions(+), 6 deletions(-)target/riscv/cpu.c +22
-0@@ -29,6 +29,7 @@#include "qapi/visitor.h" #include "qemu/error-report.h" #include "hw/qdev-properties.h" +#include "hw/core/qdev-prop-internal.h" #include "migration/vmstate.h" #include "fpu/softfloat-helpers.h" #include "sysemu/kvm.h" @@ -53,6 +54,15 @@ const uint32_t misa_bits[] = {RVI, RVE, RVM, RVA, RVF, RVD, RVV,#define BYTE (x) (x)#endif +/* Hash that stores general user set numeric options */ +static GHashTable *general_user_opts; + +static void cpu_option_add_user_setting (const char *optname,uint32_t value) +{ +g_hash_table_insert (general_user_opts, (gpointer )optname, +GUINT_TO_POINTER (value)); +} +#define ISA_EXT_DATA_ENTRY (_name, _min_ver, _prop) \ {#_name, _min_ver, CPU_CFG_OFFSET(_prop)}@@ -1244,6 +1254,8 @@ static void riscv_cpu_init(Object *obj) IRQ_LOCAL_MAX + IRQ_LOCAL_GUEST_MAX);#endif /* CONFIG_USER_ONLY */ + general_user_opts =g_hash_table_new (g_str_hash, g_str_equal); +/* * The timer and performance counters extensions were supported * in QEMU before they were added as discrete extensions in the @@ -1664,8 +1676,54 @@ static const PropertyInfo prop_vext_spec = { .set = prop_vext_spec_set, }; +static void prop_vlen_set (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +RISCVCPU *cpu =RISCV_CPU (obj); +uint16_t value; + +if (!visit_type_uint16 (v, name, &value, errp)) { +return ; + } +
Quoted 8 lines
target/riscv/cpu.c static const PropertyInfo prop_vext_spec = { · line 1694
Quoted 6 lines
target/riscv/cpu.c +6
-0+if (!is_power_of_2 (value)) { +error_setg (errp,"Vector extension VLEN must be power of 2" ); +return ; + } + +/* Always allow setting a default value */ What is the case for vlen equal to 0? Since in properties it is defined with default value set to 128.
The process of setting a default uses the default setter of the property. I.e. when setting vlen default value to 128, this function will be called with value = 128 when cpu->cfg.vlen is 0.
If we don't special case this scenario we'll fail the "vendor CPUs don't allow changing vlen" check that comes right after.
Thanks,
Daniel
Quoted 67 lines
Quoted 67 lines
target/riscv/cpu.c +34
-1+if (cpu->cfg.vlen ==0 ) { + cpu->cfg.vlen = value; +return ; + } + +if (value != cpu->cfg.vlen &&riscv_cpu_is_vendor (obj)) { +cpu_set_prop_err (cpu, name, errp); +error_append_hint (errp,"Current '%s' val: %u\n" , + name, cpu->cfg.vlen); +return ; + } + +cpu_option_add_user_setting (name, value); + cpu->cfg.vlen = value; +} + +static void prop_vlen_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +uint16_t value =RISCV_CPU (obj)->cfg.vlen; + +visit_type_uint16 (v, name, &value, errp); +} + +static const PropertyInfo prop_vlen = { + .name ="vlen" , + .get = prop_vlen_get, + .set = prop_vlen_set, + .set_default_value = qdev_propinfo_set_default_value_uint, +}; +Property riscv_cpu_options[] = { -DEFINE_PROP_UINT16 ("vlen" ,RISCVCPU , cfg.vlen,128 ),DEFINE_PROP_UINT16 ("elen" ,RISCVCPU , cfg.elen,64 ),DEFINE_PROP_UINT16 ("cbom_blocksize" ,RISCVCPU , cfg.cbom_blocksize,64 ),@@ -1687,6 +1745,9 @@ static Property riscv_cpu_properties[] = { {.name = "priv_spec", .info = &prop_priv_spec}, {.name = "vext_spec", .info = &prop_vext_spec}, + {.name = "vlen", .info = &prop_vlen, + .set_default = true, .defval.u = 128}, +#ifndef CONFIG_USER_ONLY DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC),#endif target/riscv/tcg/tcg-cpu.c +0
-6@@ -178,11 +178,6 @@ static void riscv_cpu_validate_misa_mxl(RISCVCPU *cpu, Error **errp)static void riscv_cpu_validate_v (CPURISCVState *env,RISCVCPUConfig *cfg,Error **errp) { -if (!is_power_of_2 (cfg->vlen)) { -error_setg (errp,"Vector extension VLEN must be power of 2" ); -return ; - } -if (cfg->vlen >RV_VLEN_MAX || cfg->vlen <128 ) {error_setg (errp, "Vector extension implementation only supports VLEN " --2.43.0
Re: [PATCH v2 08/16] target/riscv: move 'vlen' to riscv_cpu_properties[]
Quoted 88 lines · Daniel Henrique Barboza
Quoted 76 lines · Vladimir Isaev
Quoted 75 lines · Daniel Henrique Barboza
Turning 'vlen' into a class property will allow its default value to be overwritten by
cpu_init()later on, solving the issue we have now where CPU specific settings are getting overwritten by the default.For 'vlen', 'elen' and the blocksize options we need a way of tracking if the user set a value for them. This is benign for TCG since the cost of always validating these values are small, but for KVM we need syscalls to read the host values to make the validations. Knowing whether the user didn't touch the values makes a difference. We'll track user setting for these properties using a hash, like we do in the TCG driver.
Common validation bits are moved from
riscv_cpu_validate_v()toprop_vlen_set()to be shared with KVM.And, as done with every option we migrated to riscv_cpu_properties[], vendor CPUs can't have their 'vlen' value changed.
Signed-off-by Daniel Henrique Barboza <[email protected]>---
target/riscv/cpu.c | 63 +++++++++++++++++++++++++++++++++++++-target/riscv/tcg/tcg-cpu.c| 5 ---2 files changed, 62 insertions(+), 6 deletions(-)target/riscv/cpu.c +22
-0@@ -29,6 +29,7 @@ #include "qapi/visitor.h" #include "qemu/error-report.h" #include "hw/qdev-properties.h" +#include "hw/core/qdev-prop-internal.h" #include "migration/vmstate.h" #include "fpu/softfloat-helpers.h" #include "sysemu/kvm.h"@@ -53,6 +54,15 @@ const uint32_t misa_bits[] = {RVI, RVE, RVM, RVA, RVF, RVD, RVV, #define BYTE(x) (x) #endif +/* Hash that stores general user set numeric options */ +static GHashTable *general_user_opts; + +static void cpu_option_add_user_setting (const char *optname,uint32_t value) +{ + g_hash_table_insert(general_user_opts, (gpointer)optname, + GUINT_TO_POINTER(value)); +} + #define ISA_EXT_DATA_ENTRY(_name, _min_ver, _prop) \ {#_name, _min_ver, CPU_CFG_OFFSET(_prop)}@@ -1244,6 +1254,8 @@ static void riscv_cpu_init(Object *obj) IRQ_LOCAL_MAX + IRQ_LOCAL_GUEST_MAX); #endif /* CONFIG_USER_ONLY */ + general_user_opts = g_hash_table_new(g_str_hash, g_str_equal); + /** The timer and performance counters extensions were supported * in QEMU before they were added as discrete extensions in the @@ -1664,8 +1676,54 @@ static const PropertyInfo prop_vext_spec = { .set = prop_vext_spec_set, }; +static void prop_vlen_set (Object *obj,Visitor *v,const char *name, + void *opaque, Error **errp) +{ + RISCVCPU *cpu = RISCV_CPU(obj); + uint16_t value; + + if (!visit_type_uint16(v, name, &value, errp)) { + return; + } +Quoted 8 lines
target/riscv/cpu.c static const PropertyInfo prop_vext_spec = { · line 1694
Quoted 6 lines
target/riscv/cpu.c +6
-0+ if (!is_power_of_2(value)) { + error_setg(errp, "Vector extension VLEN must be power of 2"); + return; + } + + /* Always allow setting a default value */What is the case for vlen equal to 0? Since in properties it is defined with default value set to 128.
Quoted 6 lines
The process of setting a default uses the default setter of the property. I.e. when setting vlen default value to 128, this function will be called with value = 128 when
cpu->cfg.vlenis 0.If we don't special case this scenario we'll fail the "vendor CPUs don't allow changing vlen" check that comes right after.
I'll change this design. If we need to special case the default case for every setter to not collide with the vendor CPU check, then we're better of adding the defaults manually in riscv_cpu_init(). The defaults there will be overwritten by any defaults set in the cpu_inits() of the CPUs, so in the end it's the same effect but without the extra bloat in the setters().
In fact, reading the docs we see the following note on the 'set_default' Property flag:
* Property:
* @set_default: true if the default value should be set from @defval,
* in which case @info->set_default_value must not be NULL
* (if false then no default value is set by the property system
* and the field retains whatever value it was given by instance_init).
So I believe putting the defaults in riscv_cpu_init() is covered by the intended design.
Thanks,
Daniel
Quoted 73 lines
Thanks,
Daniel
Quoted 67 lines
Quoted 67 lines
target/riscv/cpu.c +34
-1+ if (cpu->cfg.vlen == 0) { + cpu->cfg.vlen = value; + return; + } + + if (value != cpu->cfg.vlen && riscv_cpu_is_vendor(obj)) { + cpu_set_prop_err(cpu, name, errp); + error_append_hint(errp, "Current '%s' val: %u\n", + name, cpu->cfg.vlen); + return; + } + + cpu_option_add_user_setting(name, value); + cpu->cfg.vlen = value; +} + +static void prop_vlen_get (Object *obj,Visitor *v,const char *name, + void *opaque, Error **errp) +{ + uint16_t value = RISCV_CPU(obj)->cfg.vlen; + + visit_type_uint16(v, name, &value, errp); +} + +static const PropertyInfo prop_vlen = { + .name = "vlen", + .get = prop_vlen_get, + .set = prop_vlen_set, + .set_default_value = qdev_propinfo_set_default_value_uint, +}; + Property riscv_cpu_options[] = { - DEFINE_PROP_UINT16("vlen", RISCVCPU, cfg.vlen, 128), DEFINE_PROP_UINT16("elen", RISCVCPU, cfg.elen, 64), DEFINE_PROP_UINT16("cbom_blocksize", RISCVCPU, cfg.cbom_blocksize, 64),@@ -1687,6 +1745,9 @@ static Property riscv_cpu_properties[] = { {.name = "priv_spec", .info = &prop_priv_spec}, {.name = "vext_spec", .info = &prop_vext_spec}, + {.name = "vlen", .info = &prop_vlen, + .set_default = true, .defval.u = 128}, + #ifndef CONFIG_USER_ONLY DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC), #endiftarget/riscv/tcg/tcg-cpu.c +0
-5@@ -178,11 +178,6 @@ static void riscv_cpu_validate_misa_mxl(RISCVCPU *cpu, Error **errp) static void riscv_cpu_validate_v(CPURISCVState *env, RISCVCPUConfig *cfg, Error **errp) { - if (!is_power_of_2(cfg->vlen)) { - error_setg(errp, "Vector extension VLEN must be power of 2"); - return; - } - if (cfg->vlen > RV_VLEN_MAX || cfg->vlen < 128) { error_setg(errp,"Vector extension implementation only supports VLEN "
Signature · 1 line
2.43.0
PATCH v2 9/16 target/riscv: move 'elen' to riscv_cpu_properties[]
In reply to Daniel Henrique BarbozaDo the same thing we did with 'vlen' in the previous patch with 'elen'.
--- target/riscv/cpu.c | 52 ++++++++++++++++++++++++++++++++++++-- target/riscv/tcg/tcg-cpu.c | 5 ---- 2 files changed, 50 insertions(+), 7 deletions(-)
target/riscv/cpu.c +50 -2
@@ -1723,9 +1723,54 @@ static const PropertyInfo prop_vlen = { .set_default_value = qdev_propinfo_set_default_value_uint, }; -Property riscv_cpu_options[] = { -DEFINE_PROP_UINT16 ("elen" ,RISCVCPU , cfg.elen,64 ), +static void prop_elen_set (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +RISCVCPU *cpu =RISCV_CPU (obj); +uint16_t value; + +if (!visit_type_uint16 (v, name, &value, errp)) { +return ; + } + +if (!is_power_of_2 (value)) { +error_setg (errp,"Vector extension ELEN must be power of 2" ); +return ; + } + +/* Always allow setting a default value */ +if (cpu->cfg.elen ==0 ) { + cpu->cfg.elen = value; +return ; + } + +if (value != cpu->cfg.elen &&riscv_cpu_is_vendor (obj)) { +cpu_set_prop_err (cpu, name, errp); +error_append_hint (errp,"Current '%s' val: %u\n" , + name, cpu->cfg.elen); +return ; + } + +cpu_option_add_user_setting (name, value); + cpu->cfg.elen = value; +} + +static void prop_elen_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +uint16_t value =RISCV_CPU (obj)->cfg.elen; +visit_type_uint16 (v, name, &value, errp); +} + +static const PropertyInfo prop_elen = { + .name ="elen" , + .get = prop_elen_get, + .set = prop_elen_set, + .set_default_value = qdev_propinfo_set_default_value_uint, +}; + +Property riscv_cpu_options[] = {DEFINE_PROP_UINT16 ("cbom_blocksize" ,RISCVCPU , cfg.cbom_blocksize,64 ),DEFINE_PROP_UINT16 ("cboz_blocksize" ,RISCVCPU , cfg.cboz_blocksize,64 ),
@@ -1748,6 +1793,9 @@ static Property riscv_cpu_properties[] = { {.name = "vlen", .info = &prop_vlen, .set_default = true, .defval.u = 128}, + {.name = "elen", .info = &prop_elen, + .set_default = true, .defval.u = 64}, +#ifndef CONFIG_USER_ONLY DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC),#endif
target/riscv/tcg/tcg-cpu.c +0 -5
@@ -185,11 +185,6 @@ static void riscv_cpu_validate_v(CPURISCVState *env, RISCVCPUConfig *cfg,return ; } -if (!is_power_of_2 (cfg->elen)) { -error_setg (errp,"Vector extension ELEN must be power of 2" ); -return ; - } -if (cfg->elen >64 || cfg->elen <8 ) {error_setg (errp, "Vector extension implementation only supports ELEN "
Signature · 1 line
2.43.0
PATCH v2 10/16 target/riscv: create finalize_features() for KVM
In reply to Daniel Henrique BarbozaTo turn cbom_blocksize and cboz_blocksize into class properties we need KVM specific changes.
KVM is creating its own version of these options with a customized setter() that prevents users from picking an invalid value during init() time. This comes at the cost of duplicating each option that KVM supports. This will keep happening for each new shared option KVM implements in the future.
We can avoid that by using the same property TCG uses and adding specific KVM handling during finalize() time, like TCG already does with riscv_tcg_cpu_finalize_features(). To do that, the common CPU property offers a way of knowing if an option was user set or not, sparing us from doing unneeded syscalls.
riscv_kvm_cpu_finalize_features() is then created using the same KVMScratch CPU we already use during init() time, since finalize() time is still too early to use the official KVM CPU for it. cbom_blocksize and cboz_blocksize are then handled during finalize() in the same way they're handled by their KVM specific setter.
With this change we can proceed with the blocksize changes in the common code without breaking the KVM driver.
--- target/riscv/cpu.c | 16 +++++++--- target/riscv/cpu.h | 1 + target/riscv/kvm/kvm-cpu.c | 59 ++++++++++++++++++++++++++++++++++++ target/riscv/kvm/kvm_riscv.h | 1 + 4 files changed, 72 insertions(+), 5 deletions(-)
target/riscv/cpu.c +11 -5
@@ -63,6 +63,11 @@ static void cpu_option_add_user_setting(const char *optname, uint32_t value) GUINT_TO_POINTER(value)); } +bool riscv_cpu_option_set (const char *optname) +{ +return g_hash_table_contains (general_user_opts, optname); +} +#define ISA_EXT_DATA_ENTRY (_name, _min_ver, _prop) \ {#_name, _min_ver, CPU_CFG_OFFSET(_prop)}
@@ -1056,17 +1061,18 @@ void riscv_cpu_finalize_features(RISCVCPU *cpu, Error **errp) {Error *local_err =NULL ; -/* -* KVM accel does not have a specialized finalize() -* callback because its extensions are validated -* in the get()/set() callbacks of each property. -*/ if (tcg_enabled ()) {riscv_tcg_cpu_finalize_features (cpu, &local_err);if (local_err !=NULL ) {error_propagate (errp, local_err);return ; } + }else if (kvm_enabled ()) { +riscv_kvm_cpu_finalize_features (cpu, &local_err); +if (local_err !=NULL ) { +error_propagate (errp, local_err); +return ; + } }#ifndef CONFIG_USER_ONLY
target/riscv/cpu.h +1 -0
@@ -495,6 +495,7 @@ bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size, bool probe, uintptr_t retaddr);char *riscv_isa_string (RISCVCPU *cpu);void riscv_cpu_list (void ); +bool riscv_cpu_option_set (const char *optname);#define cpu_list riscv_cpu_list#define cpu_mmu_index riscv_cpu_mmu_index
target/riscv/kvm/kvm-cpu.c +59 -0
65 lines not on this page · raw message
target/riscv/kvm/kvm_riscv.h +1 -0
@@ -27,5 +27,6 @@ void kvm_riscv_aia_create(MachineState *machine, uint64_t group_shift, uint64_t guest_num);void riscv_kvm_aplic_request (void *opaque,int irq,int level);int kvm_riscv_sync_mpstate_to_kvm (RISCVCPU *cpu,int state); +void riscv_kvm_cpu_finalize_features (RISCVCPU *cpu,Error **errp);#endif
Signature · 1 line
2.43.0
Re: [PATCH v2 10/16] target/riscv: create finalize_features() for KVM
Quoted 37 lines · Daniel Henrique Barboza
To turn
cbom_blocksizeandcboz_blocksizeinto class properties we need KVM specific changes.KVM is creating its own version of these options with a customized
setter()that prevents users from picking an invalid value duringinit()time. This comes at the cost of duplicating each option that KVM supports. This will keep happening for each new shared option KVM implements in the future.We can avoid that by using the same property TCG uses and adding specific KVM handling during
finalize()time, like TCG already does withriscv_tcg_cpu_finalize_features(). To do that, the common CPU property offers a way of knowing if an option was user set or not, sparing us from doing unneeded syscalls.
riscv_kvm_cpu_finalize_features()is then created using the same KVMScratch CPU we already use duringinit()time, sincefinalize()time is still too early to use the official KVM CPU for it.cbom_blocksizeandcboz_blocksizeare then handled duringfinalize()in the same way they're handled by their KVM specific setter.With this change we can proceed with the blocksize changes in the common code without breaking the KVM driver.
Signed-off-by Daniel Henrique Barboza <[email protected]>--- target/riscv/cpu.c | 16 +++++++--- target/riscv/cpu.h | 1 + target/riscv/kvm/kvm-cpu.c | 59 ++++++++++++++++++++++++++++++++++++ target/riscv/kvm/kvm_riscv.h | 1 + 4 files changed, 72 insertions(+), 5 deletions(-)target/riscv/cpu.c +0
-0
target/riscv/cpu.c static void cpu_option_add_user_setting(const char *optname, uint32_t value) · line 70
Quoted 8 lines
target/riscv/cpu.c +5
-0@@ -63,6 +63,11 @@ static void cpu_option_add_user_setting(const char *optname, uint32_t value) GUINT_TO_POINTER(value)); } +bool riscv_cpu_option_set (const char *optname) +{ +return g_hash_table_contains (general_user_opts, optname); +} +
This function may work in unexpected way for future developer since we can check just somehow restricted number of options using it, like vlen/elen/cbom/cboz size, but not vext_spec or pmu-num/mask.
Quoted 124 lines
target/riscv/cpu.c +6
-5#define ISA_EXT_DATA_ENTRY (_name, _min_ver, _prop) \ {#_name, _min_ver, CPU_CFG_OFFSET(_prop)}@@ -1056,17 +1061,18 @@ void riscv_cpu_finalize_features(RISCVCPU *cpu, Error **errp) {Error *local_err =NULL ; -/* -* KVM accel does not have a specialized finalize() -* callback because its extensions are validated -* in the get()/set() callbacks of each property. -*/ if (tcg_enabled ()) {riscv_tcg_cpu_finalize_features (cpu, &local_err);if (local_err !=NULL ) {error_propagate (errp, local_err);return ; } + }else if (kvm_enabled ()) { +riscv_kvm_cpu_finalize_features (cpu, &local_err); +if (local_err !=NULL ) { +error_propagate (errp, local_err); +return ; + } }#ifndef CONFIG_USER_ONLY target/riscv/cpu.h +1
-0@@ -495,6 +495,7 @@ bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size, bool probe, uintptr_t retaddr);char *riscv_isa_string (RISCVCPU *cpu);void riscv_cpu_list (void ); +bool riscv_cpu_option_set (const char *optname);#define cpu_list riscv_cpu_list#define cpu_mmu_index riscv_cpu_mmu_indextarget/riscv/kvm/kvm-cpu.c +59
-0@@ -1490,6 +1490,65 @@ static void kvm_cpu_instance_init(CPUState *cs) } } +void riscv_kvm_cpu_finalize_features (RISCVCPU *cpu,Error **errp) +{ +CPURISCVState *env = &cpu->env; +KVMScratchCPU kvmcpu; +struct kvm_one_reg reg; +uint64_t val; +int ret; + +/* short-circuit without spinning the scratch CPU */ +if (!cpu->cfg.ext_zicbom && !cpu->cfg.ext_zicboz) { +return ; + } + +if (!kvm_riscv_create_scratch_vcpu (&kvmcpu)) { +error_setg (errp,"Unable to create scratch KVM cpu" ); +return ; + } + +if (cpu->cfg.ext_zicbom && +riscv_cpu_option_set (kvm_cbom_blocksize.name)) { + + reg.id =kvm_riscv_reg_id_ulong (env,KVM_REG_RISCV_CONFIG , + kvm_cbom_blocksize.kvm_reg_id); + reg.addr = (uint64_t )&val; + ret =ioctl (kvmcpu.cpufd,KVM_GET_ONE_REG , ®); +if (ret !=0 ) { +error_setg (errp,"Unable to read cbom_blocksize, error %d" , errno); +return ; + } + +if (cpu->cfg.cbom_blocksize != val) { +error_setg (errp,"Unable to set cbom_blocksize to a different " +"value than the host (%lu)" , val); +return ; + } + } + +if (cpu->cfg.ext_zicboz && +riscv_cpu_option_set (kvm_cboz_blocksize.name)) { + + reg.id =kvm_riscv_reg_id_ulong (env,KVM_REG_RISCV_CONFIG , + kvm_cboz_blocksize.kvm_reg_id); + reg.addr = (uint64_t )&val; + ret =ioctl (kvmcpu.cpufd,KVM_GET_ONE_REG , ®); +if (ret !=0 ) { +error_setg (errp,"Unable to read cbom_blocksize, error %d" , errno); +return ; + } + +if (cpu->cfg.cboz_blocksize != val) { +error_setg (errp,"Unable to set cboz_blocksize to a different " +"value than the host (%lu)" , val); +return ; + } + } + +kvm_riscv_destroy_scratch_vcpu (&kvmcpu); +} +static void kvm_cpu_accel_class_init (ObjectClass *oc,void *data) {AccelCPUClass *acc =ACCEL_CPU_CLASS (oc);target/riscv/kvm/kvm_riscv.h +1
-1@@ -27,5 +27,6 @@ void kvm_riscv_aia_create(MachineState *machine, uint64_t group_shift, uint64_t guest_num);void riscv_kvm_aplic_request (void *opaque,int irq,int level);int kvm_riscv_sync_mpstate_to_kvm (RISCVCPU *cpu,int state); +void riscv_kvm_cpu_finalize_features (RISCVCPU *cpu,Error **errp);#endif --2.43.0
Re: [PATCH v2 10/16] target/riscv: create finalize_features() for KVM
Quoted 41 lines · Vladimir Isaev
Quoted 40 lines · Daniel Henrique Barboza
To turn
cbom_blocksizeandcboz_blocksizeinto class properties we need KVM specific changes.KVM is creating its own version of these options with a customized
setter()that prevents users from picking an invalid value duringinit()time. This comes at the cost of duplicating each option that KVM supports. This will keep happening for each new shared option KVM implements in the future.We can avoid that by using the same property TCG uses and adding specific KVM handling during
finalize()time, like TCG already does withriscv_tcg_cpu_finalize_features(). To do that, the common CPU property offers a way of knowing if an option was user set or not, sparing us from doing unneeded syscalls.
riscv_kvm_cpu_finalize_features()is then created using the same KVMScratch CPU we already use duringinit()time, sincefinalize()time is still too early to use the official KVM CPU for it.cbom_blocksizeandcboz_blocksizeare then handled duringfinalize()in the same way they're handled by their KVM specific setter.With this change we can proceed with the blocksize changes in the common code without breaking the KVM driver.
Signed-off-by Daniel Henrique Barboza <[email protected]>--- target/riscv/cpu.c | 16 +++++++--- target/riscv/cpu.h | 1 + target/riscv/kvm/kvm-cpu.c | 59 ++++++++++++++++++++++++++++++++++++ target/riscv/kvm/kvm_riscv.h | 1 + 4 files changed, 72 insertions(+), 5 deletions(-)target/riscv/cpu.c +0
-0@@ -63,6 +63,11 @@ static void cpu_option_add_user_setting(const char *optname, uint32_t value) GUINT_TO_POINTER(value)); }
Quoted 8 lines
target/riscv/cpu.c static void cpu_option_add_user_setting(const char *optname, uint32_t value) · line 70
Quoted 5 lines
target/riscv/cpu.c +5
-0+bool riscv_cpu_option_set (const char *optname) +{ +return g_hash_table_contains (general_user_opts, optname); +} +This function may work in unexpected way for future developer since we can check just somehow restricted number of options using it, like vlen/elen/cbom/cboz size, but not
vext_specor pmu-num/mask.
Makes sense. I'll add all options in this hash to make it consistent.
Thanks,
Daniel
Quoted 125 lines
Quoted 125 lines
target/riscv/cpu.c +6
-5#define ISA_EXT_DATA_ENTRY (_name, _min_ver, _prop) \ {#_name, _min_ver, CPU_CFG_OFFSET(_prop)}@@ -1056,17 +1061,18 @@ void riscv_cpu_finalize_features(RISCVCPU *cpu, Error **errp) {Error *local_err =NULL ; -/* -* KVM accel does not have a specialized finalize() -* callback because its extensions are validated -* in the get()/set() callbacks of each property. -*/ if (tcg_enabled ()) {riscv_tcg_cpu_finalize_features (cpu, &local_err);if (local_err !=NULL ) {error_propagate (errp, local_err);return ; } + }else if (kvm_enabled ()) { +riscv_kvm_cpu_finalize_features (cpu, &local_err); +if (local_err !=NULL ) { +error_propagate (errp, local_err); +return ; + } }#ifndef CONFIG_USER_ONLY target/riscv/cpu.h +1
-0@@ -495,6 +495,7 @@ bool riscv_cpu_tlb_fill(CPUState *cs, vaddr address, int size, bool probe, uintptr_t retaddr);char *riscv_isa_string (RISCVCPU *cpu);void riscv_cpu_list (void ); +bool riscv_cpu_option_set (const char *optname);#define cpu_list riscv_cpu_list#define cpu_mmu_index riscv_cpu_mmu_indextarget/riscv/kvm/kvm-cpu.c +59
-0@@ -1490,6 +1490,65 @@ static void kvm_cpu_instance_init(CPUState *cs) } } +void riscv_kvm_cpu_finalize_features (RISCVCPU *cpu,Error **errp) +{ +CPURISCVState *env = &cpu->env; +KVMScratchCPU kvmcpu; +struct kvm_one_reg reg; +uint64_t val; +int ret; + +/* short-circuit without spinning the scratch CPU */ +if (!cpu->cfg.ext_zicbom && !cpu->cfg.ext_zicboz) { +return ; + } + +if (!kvm_riscv_create_scratch_vcpu (&kvmcpu)) { +error_setg (errp,"Unable to create scratch KVM cpu" ); +return ; + } + +if (cpu->cfg.ext_zicbom && +riscv_cpu_option_set (kvm_cbom_blocksize.name)) { + + reg.id =kvm_riscv_reg_id_ulong (env,KVM_REG_RISCV_CONFIG , + kvm_cbom_blocksize.kvm_reg_id); + reg.addr = (uint64_t )&val; + ret =ioctl (kvmcpu.cpufd,KVM_GET_ONE_REG , ®); +if (ret !=0 ) { +error_setg (errp,"Unable to read cbom_blocksize, error %d" , errno); +return ; + } + +if (cpu->cfg.cbom_blocksize != val) { +error_setg (errp,"Unable to set cbom_blocksize to a different " +"value than the host (%lu)" , val); +return ; + } + } + +if (cpu->cfg.ext_zicboz && +riscv_cpu_option_set (kvm_cboz_blocksize.name)) { + + reg.id =kvm_riscv_reg_id_ulong (env,KVM_REG_RISCV_CONFIG , + kvm_cboz_blocksize.kvm_reg_id); + reg.addr = (uint64_t )&val; + ret =ioctl (kvmcpu.cpufd,KVM_GET_ONE_REG , ®); +if (ret !=0 ) { +error_setg (errp,"Unable to read cbom_blocksize, error %d" , errno); +return ; + } + +if (cpu->cfg.cboz_blocksize != val) { +error_setg (errp,"Unable to set cboz_blocksize to a different " +"value than the host (%lu)" , val); +return ; + } + } + +kvm_riscv_destroy_scratch_vcpu (&kvmcpu); +} +static void kvm_cpu_accel_class_init (ObjectClass *oc,void *data) {AccelCPUClass *acc =ACCEL_CPU_CLASS (oc);target/riscv/kvm/kvm_riscv.h +1
-1@@ -27,5 +27,6 @@ void kvm_riscv_aia_create(MachineState *machine, uint64_t group_shift, uint64_t guest_num);void riscv_kvm_aplic_request (void *opaque,int irq,int level);int kvm_riscv_sync_mpstate_to_kvm (RISCVCPU *cpu,int state); +void riscv_kvm_cpu_finalize_features (RISCVCPU *cpu,Error **errp);#endif --2.43.0
PATCH v2 11/16 target/riscv: move 'cbom_blocksize' to riscv_cpu_properties[]
In reply to Daniel Henrique BarbozaAfter adding a KVM finalize() implementation, turn cbom_blocksize into a class property. Follow the same design we used with 'vlen' and 'elen'.
The duplicated 'cbom_blocksize' KVM property can be removed from kvm_riscv_add_cpu_user_properties().
--- target/riscv/cpu.c | 46 +++++++++++++++++++++++++++++++++++++- target/riscv/kvm/kvm-cpu.c | 4 ---- 2 files changed, 45 insertions(+), 5 deletions(-)
target/riscv/cpu.c +45 -1
@@ -1776,8 +1776,49 @@ static const PropertyInfo prop_elen = { .set_default_value = qdev_propinfo_set_default_value_uint, }; +static void prop_cbom_blksize_set (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +RISCVCPU *cpu =RISCV_CPU (obj); +uint16_t value; + +if (!visit_type_uint16 (v, name, &value, errp)) { +return ; + } + +/* Always allow setting a default value */ +if (cpu->cfg.cbom_blocksize ==0 ) { + cpu->cfg.cbom_blocksize = value; +return ; + } + +if (value != cpu->cfg.cbom_blocksize &&riscv_cpu_is_vendor (obj)) { +cpu_set_prop_err (cpu, name, errp); +error_append_hint (errp,"Current '%s' val: %u\n" , + name, cpu->cfg.cbom_blocksize); +return ; + } + +cpu_option_add_user_setting (name, value); + cpu->cfg.cbom_blocksize = value; +} + +static void prop_cbom_blksize_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +uint16_t value =RISCV_CPU (obj)->cfg.cbom_blocksize; + +visit_type_uint16 (v, name, &value, errp); +} + +static const PropertyInfo prop_cbom_blksize = { + .name ="cbom_blocksize" , + .get = prop_cbom_blksize_get, + .set = prop_cbom_blksize_set, + .set_default_value = qdev_propinfo_set_default_value_uint, +}; +Property riscv_cpu_options[] = { -DEFINE_PROP_UINT16 ("cbom_blocksize" ,RISCVCPU , cfg.cbom_blocksize,64 ),DEFINE_PROP_UINT16 ("cboz_blocksize" ,RISCVCPU , cfg.cboz_blocksize,64 ),DEFINE_PROP_END_OF_LIST (),
@@ -1802,6 +1843,9 @@ static Property riscv_cpu_properties[] = { {.name = "elen", .info = &prop_elen, .set_default = true, .defval.u = 64}, + {.name = "cbom_blocksize", .info = &prop_cbom_blksize, + .set_default = true, .defval.u = 64}, +#ifndef CONFIG_USER_ONLY DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC),#endif
target/riscv/kvm/kvm-cpu.c +0 -4
@@ -484,10 +484,6 @@ static void kvm_riscv_add_cpu_user_properties(Object *cpu_obj) NULL, multi_cfg); } -object_property_add (cpu_obj,"cbom_blocksize" ,"uint16" , -NULL , kvm_cpu_set_cbomz_blksize, -NULL , &kvm_cbom_blocksize); -object_property_add (cpu_obj,"cboz_blocksize" ,"uint16" ,NULL , kvm_cpu_set_cbomz_blksize,NULL , &kvm_cboz_blocksize);
Signature · 1 line
2.43.0
PATCH v2 12/16 target/riscv: move 'cboz_blocksize' to riscv_cpu_properties[]
In reply to Daniel Henrique BarbozaDo the same we did with 'cbom_blocksize' in the previous patch.
Remove the now unused kvm_cpu_set_cbomz_blksize() setter.
--- target/riscv/cpu.c | 45 +++++++++++++++++++++++++++++++++++++- target/riscv/kvm/kvm-cpu.c | 28 ------------------------ 2 files changed, 44 insertions(+), 29 deletions(-)
target/riscv/cpu.c +44 -1
@@ -1818,8 +1818,49 @@ static const PropertyInfo prop_cbom_blksize = { .set_default_value = qdev_propinfo_set_default_value_uint, }; +static void prop_cboz_blksize_set (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +RISCVCPU *cpu =RISCV_CPU (obj); +uint16_t value; + +if (!visit_type_uint16 (v, name, &value, errp)) { +return ; + } + +/* Always allow setting a default value */ +if (cpu->cfg.cboz_blocksize ==0 ) { + cpu->cfg.cboz_blocksize = value; +return ; + } + +if (value != cpu->cfg.cboz_blocksize &&riscv_cpu_is_vendor (obj)) { +cpu_set_prop_err (cpu, name, errp); +error_append_hint (errp,"Current '%s' val: %u\n" , + name, cpu->cfg.cboz_blocksize); +return ; + } + +cpu_option_add_user_setting (name, value); + cpu->cfg.cboz_blocksize = value; +} + +static void prop_cboz_blksize_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +uint16_t value =RISCV_CPU (obj)->cfg.cboz_blocksize; + +visit_type_uint16 (v, name, &value, errp); +} + +static const PropertyInfo prop_cboz_blksize = { + .name ="cboz_blocksize" , + .get = prop_cboz_blksize_get, + .set = prop_cboz_blksize_set, + .set_default_value = qdev_propinfo_set_default_value_uint, +}; +Property riscv_cpu_options[] = { -DEFINE_PROP_UINT16 ("cboz_blocksize" ,RISCVCPU , cfg.cboz_blocksize,64 ),DEFINE_PROP_END_OF_LIST (), };
@@ -1845,6 +1886,8 @@ static Property riscv_cpu_properties[] = { {.name = "cbom_blocksize", .info = &prop_cbom_blksize, .set_default = true, .defval.u = 64}, + {.name = "cboz_blocksize", .info = &prop_cboz_blksize, + .set_default = true, .defval.u = 64},#ifndef CONFIG_USER_ONLY DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC),
target/riscv/kvm/kvm-cpu.c +0 -28
@@ -343,30 +343,6 @@ static KVMCPUConfig kvm_cboz_blocksize = { .kvm_reg_id = KVM_REG_RISCV_CONFIG_REG(zicboz_block_size) }; -static void kvm_cpu_set_cbomz_blksize (Object *obj,Visitor *v, -const char *name, -void *opaque,Error **errp) -{ -KVMCPUConfig *cbomz_cfg = opaque; -RISCVCPU *cpu =RISCV_CPU (obj); -uint16_t value, *host_val; - -if (!visit_type_uint16 (v, name, &value, errp)) { -return ; - } - - host_val =kvmconfig_get_cfg_addr (cpu, cbomz_cfg); - -if (value != *host_val) { -error_report ("Unable to set %s to a different value than " -"the host (%u)" , - cbomz_cfg->name, *host_val); -exit (EXIT_FAILURE ); - } - - cbomz_cfg->user_set = true; -} -static void kvm_riscv_update_cpu_cfg_isa_ext (RISCVCPU *cpu,CPUState *cs) {CPURISCVState *env = &cpu->env;
@@ -484,10 +460,6 @@ static void kvm_riscv_add_cpu_user_properties(Object *cpu_obj) NULL, multi_cfg); } -object_property_add (cpu_obj,"cboz_blocksize" ,"uint16" , -NULL , kvm_cpu_set_cbomz_blksize, -NULL , &kvm_cboz_blocksize); -riscv_cpu_add_kvm_unavail_prop_array (cpu_obj, riscv_cpu_extensions);riscv_cpu_add_kvm_unavail_prop_array (cpu_obj, riscv_cpu_vendor_exts);riscv_cpu_add_kvm_unavail_prop_array (cpu_obj, riscv_cpu_experimental_exts);
Signature · 1 line
2.43.0
PATCH v2 13/16 target/riscv: remove riscv_cpu_options[]
In reply to Daniel Henrique BarbozaThe array is empty and can be removed.
--- target/riscv/cpu.c | 5 ----- target/riscv/cpu.h | 1 - target/riscv/kvm/kvm-cpu.c | 9 --------- target/riscv/tcg/tcg-cpu.c | 4 ---- 4 files changed, 19 deletions(-)
target/riscv/cpu.c +0 -5
@@ -1860,11 +1860,6 @@ static const PropertyInfo prop_cboz_blksize = { .set_default_value = qdev_propinfo_set_default_value_uint, }; -Property riscv_cpu_options[] = { - -DEFINE_PROP_END_OF_LIST (), -}; -static Property riscv_cpu_properties[] = {DEFINE_PROP_BOOL ("debug" ,RISCVCPU , cfg.debug, true),
target/riscv/cpu.h +0 -1
@@ -774,7 +774,6 @@ extern const RISCVCPUMultiExtConfig riscv_cpu_extensions[];extern const RISCVCPUMultiExtConfig riscv_cpu_vendor_exts[];extern const RISCVCPUMultiExtConfig riscv_cpu_experimental_exts[];extern const RISCVCPUMultiExtConfig riscv_cpu_deprecated_exts[]; -extern Property riscv_cpu_options[]; typedef struct isa_ext_data { const char *name;
target/riscv/kvm/kvm-cpu.c +0 -9
@@ -1443,19 +1443,10 @@ void kvm_riscv_aia_create(MachineState *machine, uint64_t group_shift,static void kvm_cpu_instance_init (CPUState *cs) {Object *obj =OBJECT (RISCV_CPU (cs)); -DeviceState *dev =DEVICE (obj);riscv_init_kvm_registers (obj);kvm_riscv_add_cpu_user_properties (obj); - -for (Property *prop = riscv_cpu_options; prop && prop->name; prop++) { -/* Check if we have a specific KVM handler for the option */ -if (object_property_find (obj, prop->name)) { -continue ; - } -qdev_property_add_static (dev, prop); - } }void riscv_kvm_cpu_finalize_features (RISCVCPU *cpu,Error **errp)
target/riscv/tcg/tcg-cpu.c +0 -4
@@ -889,10 +889,6 @@ static void riscv_cpu_add_user_properties(Object *obj)riscv_cpu_add_multiext_prop_array (obj, riscv_cpu_experimental_exts);riscv_cpu_add_multiext_prop_array (obj, riscv_cpu_deprecated_exts); - -for (Property *prop = riscv_cpu_options; prop && prop->name; prop++) { -qdev_property_add_static (DEVICE (obj), prop); - } }/*
Signature · 1 line
2.43.0
PATCH v2 14/16 target/riscv/cpu.c: move 'mvendorid' to riscv_cpu_properties[]
In reply to Daniel Henrique BarbozaKeep all class properties in riscv_cpu_properties[].
--- target/riscv/cpu.c | 69 +++++++++++++++++++++++++--------------------- 1 file changed, 37 insertions(+), 32 deletions(-)
target/riscv/cpu.c +37 -32
@@ -1860,6 +1860,41 @@ static const PropertyInfo prop_cboz_blksize = { .set_default_value = qdev_propinfo_set_default_value_uint, }; +static void prop_mvendorid_set (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +bool dynamic_cpu =riscv_cpu_is_dynamic (obj); +RISCVCPU *cpu =RISCV_CPU (obj); +uint32_t prev_val = cpu->cfg.mvendorid; +uint32_t value; + +if (!visit_type_uint32 (v, name, &value, errp)) { +return ; + } + +if (!dynamic_cpu && prev_val != value) { +error_setg (errp,"Unable to change %s mvendorid (0x%x)" , +object_get_typename (obj), prev_val); +return ; + } + + cpu->cfg.mvendorid = value; +} + +static void prop_mvendorid_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +uint32_t value =RISCV_CPU (obj)->cfg.mvendorid; + +visit_type_uint32 (v, name, &value, errp); +} + +static const PropertyInfo prop_mvendorid = { + .name ="mvendorid" , + .get = prop_mvendorid_get, + .set = prop_mvendorid_set, +}; +static Property riscv_cpu_properties[] = {DEFINE_PROP_BOOL ("debug" ,RISCVCPU , cfg.debug, true),
@@ -1884,6 +1919,8 @@ static Property riscv_cpu_properties[] = { {.name = "cboz_blocksize", .info = &prop_cboz_blksize, .set_default = true, .defval.u = 64}, + {.name = "mvendorid", .info = &prop_mvendorid}, +#ifndef CONFIG_USER_ONLY DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC),#endif
@@ -1948,35 +1985,6 @@ static const struct SysemuCPUOps riscv_sysemu_ops = { };#endif -static void cpu_set_mvendorid (Object *obj,Visitor *v,const char *name, -void *opaque,Error **errp) -{ -bool dynamic_cpu =riscv_cpu_is_dynamic (obj); -RISCVCPU *cpu =RISCV_CPU (obj); -uint32_t prev_val = cpu->cfg.mvendorid; -uint32_t value; - -if (!visit_type_uint32 (v, name, &value, errp)) { -return ; - } - -if (!dynamic_cpu && prev_val != value) { -error_setg (errp,"Unable to change %s mvendorid (0x%x)" , -object_get_typename (obj), prev_val); -return ; - } - - cpu->cfg.mvendorid = value; -} - -static void cpu_get_mvendorid (Object *obj,Visitor *v,const char *name, -void *opaque,Error **errp) -{ -uint32_t value =RISCV_CPU (obj)->cfg.mvendorid; - -visit_type_uint32 (v, name, &value, errp); -} -static void cpu_set_mimpid (Object *obj,Visitor *v,const char *name,void *opaque,Error **errp) {
@@ -2086,9 +2094,6 @@ static void riscv_cpu_class_init(ObjectClass *c, void *data) cc->gdb_arch_name = riscv_gdb_arch_name; cc->gdb_get_dynamic_xml = riscv_gdb_get_dynamic_xml; -object_class_property_add (c,"mvendorid" ,"uint32" , cpu_get_mvendorid, - cpu_set_mvendorid,NULL ,NULL ); -object_class_property_add (c,"mimpid" ,"uint64" , cpu_get_mimpid, cpu_set_mimpid,NULL ,NULL );
Signature · 1 line
2.43.0
PATCH v2 15/16 target/riscv/cpu.c: move 'mimpid' to riscv_cpu_properties[]
In reply to Daniel Henrique BarbozaKeep all class properties in riscv_cpu_properties[].
--- target/riscv/cpu.c | 68 ++++++++++++++++++++++++---------------------- 1 file changed, 36 insertions(+), 32 deletions(-)
target/riscv/cpu.c +36 -32
@@ -1895,6 +1895,41 @@ static const PropertyInfo prop_mvendorid = { .set = prop_mvendorid_set, }; +static void prop_mimpid_set (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +bool dynamic_cpu =riscv_cpu_is_dynamic (obj); +RISCVCPU *cpu =RISCV_CPU (obj); +uint64_t prev_val = cpu->cfg.mimpid; +uint64_t value; + +if (!visit_type_uint64 (v, name, &value, errp)) { +return ; + } + +if (!dynamic_cpu && prev_val != value) { +error_setg (errp,"Unable to change %s mimpid (0x%" PRIu64")" , +object_get_typename (obj), prev_val); +return ; + } + + cpu->cfg.mimpid = value; +} + +static void prop_mimpid_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +uint64_t value =RISCV_CPU (obj)->cfg.mimpid; + +visit_type_uint64 (v, name, &value, errp); +} + +static const PropertyInfo prop_mimpid = { + .name ="mimpid" , + .get = prop_mimpid_get, + .set = prop_mimpid_set, +}; +static Property riscv_cpu_properties[] = {DEFINE_PROP_BOOL ("debug" ,RISCVCPU , cfg.debug, true),
@@ -1920,6 +1955,7 @@ static Property riscv_cpu_properties[] = { .set_default = true, .defval.u = 64}, {.name = "mvendorid", .info = &prop_mvendorid}, + {.name = "mimpid", .info = &prop_mimpid},#ifndef CONFIG_USER_ONLY DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC),
@@ -1985,35 +2021,6 @@ static const struct SysemuCPUOps riscv_sysemu_ops = { };#endif -static void cpu_set_mimpid (Object *obj,Visitor *v,const char *name, -void *opaque,Error **errp) -{ -bool dynamic_cpu =riscv_cpu_is_dynamic (obj); -RISCVCPU *cpu =RISCV_CPU (obj); -uint64_t prev_val = cpu->cfg.mimpid; -uint64_t value; - -if (!visit_type_uint64 (v, name, &value, errp)) { -return ; - } - -if (!dynamic_cpu && prev_val != value) { -error_setg (errp,"Unable to change %s mimpid (0x%" PRIu64")" , -object_get_typename (obj), prev_val); -return ; - } - - cpu->cfg.mimpid = value; -} - -static void cpu_get_mimpid (Object *obj,Visitor *v,const char *name, -void *opaque,Error **errp) -{ -uint64_t value =RISCV_CPU (obj)->cfg.mimpid; - -visit_type_uint64 (v, name, &value, errp); -} -static void cpu_set_marchid (Object *obj,Visitor *v,const char *name,void *opaque,Error **errp) {
@@ -2094,9 +2101,6 @@ static void riscv_cpu_class_init(ObjectClass *c, void *data) cc->gdb_arch_name = riscv_gdb_arch_name; cc->gdb_get_dynamic_xml = riscv_gdb_get_dynamic_xml; -object_class_property_add (c,"mimpid" ,"uint64" , cpu_get_mimpid, - cpu_set_mimpid,NULL ,NULL ); -object_class_property_add (c,"marchid" ,"uint64" , cpu_get_marchid, cpu_set_marchid,NULL ,NULL );
Signature · 1 line
2.43.0
PATCH v2 16/16 target/riscv/cpu.c: move 'marchid' to riscv_cpu_properties[]
In reply to Daniel Henrique BarbozaKeep all class properties in riscv_cpu_properties[].
--- target/riscv/cpu.c | 110 +++++++++++++++++++++++---------------------- 1 file changed, 57 insertions(+), 53 deletions(-)
target/riscv/cpu.c +57 -53
@@ -1930,6 +1930,62 @@ static const PropertyInfo prop_mimpid = { .set = prop_mimpid_set, }; +static void prop_marchid_set (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +bool dynamic_cpu =riscv_cpu_is_dynamic (obj); +RISCVCPU *cpu =RISCV_CPU (obj); +uint64_t prev_val = cpu->cfg.marchid; +uint64_t value, invalid_val; +uint32_t mxlen =0 ; + +if (!visit_type_uint64 (v, name, &value, errp)) { +return ; + } + +if (!dynamic_cpu && prev_val != value) { +error_setg (errp,"Unable to change %s marchid (0x%" PRIu64")" , +object_get_typename (obj), prev_val); +return ; + } + +switch (riscv_cpu_mxl (&cpu->env)) { +case MXL_RV32 : + mxlen =32 ; +break ; +case MXL_RV64 : +case MXL_RV128 : + mxlen =64 ; +break ; +default : +g_assert_not_reached (); + } + + invalid_val =1LL << (mxlen -1 ); + +if (value == invalid_val) { +error_setg (errp,"Unable to set marchid with MSB (%u) bit set " +"and the remaining bits zero" , mxlen); +return ; + } + + cpu->cfg.marchid = value; +} + +static void prop_marchid_get (Object *obj,Visitor *v,const char *name, +void *opaque,Error **errp) +{ +uint64_t value =RISCV_CPU (obj)->cfg.marchid; + +visit_type_uint64 (v, name, &value, errp); +} + +static const PropertyInfo prop_marchid = { + .name ="marchid" , + .get = prop_marchid_get, + .set = prop_marchid_set, +}; +static Property riscv_cpu_properties[] = {DEFINE_PROP_BOOL ("debug" ,RISCVCPU , cfg.debug, true),
@@ -1956,6 +2012,7 @@ static Property riscv_cpu_properties[] = { {.name = "mvendorid", .info = &prop_mvendorid}, {.name = "mimpid", .info = &prop_mimpid}, + {.name = "marchid", .info = &prop_marchid},#ifndef CONFIG_USER_ONLY DEFINE_PROP_UINT64("resetvec", RISCVCPU, env.resetvec, DEFAULT_RSTVEC),
@@ -2021,56 +2078,6 @@ static const struct SysemuCPUOps riscv_sysemu_ops = { };#endif -static void cpu_set_marchid (Object *obj,Visitor *v,const char *name, -void *opaque,Error **errp) -{ -bool dynamic_cpu =riscv_cpu_is_dynamic (obj); -RISCVCPU *cpu =RISCV_CPU (obj); -uint64_t prev_val = cpu->cfg.marchid; -uint64_t value, invalid_val; -uint32_t mxlen =0 ; - -if (!visit_type_uint64 (v, name, &value, errp)) { -return ; - } - -if (!dynamic_cpu && prev_val != value) { -error_setg (errp,"Unable to change %s marchid (0x%" PRIu64")" , -object_get_typename (obj), prev_val); -return ; - } - -switch (riscv_cpu_mxl (&cpu->env)) { -case MXL_RV32 : - mxlen =32 ; -break ; -case MXL_RV64 : -case MXL_RV128 : - mxlen =64 ; -break ; -default : -g_assert_not_reached (); - } - - invalid_val =1LL << (mxlen -1 ); - -if (value == invalid_val) { -error_setg (errp,"Unable to set marchid with MSB (%u) bit set " -"and the remaining bits zero" , mxlen); -return ; - } - - cpu->cfg.marchid = value; -} - -static void cpu_get_marchid (Object *obj,Visitor *v,const char *name, -void *opaque,Error **errp) -{ -uint64_t value =RISCV_CPU (obj)->cfg.marchid; - -visit_type_uint64 (v, name, &value, errp); -} -static void riscv_cpu_class_init (ObjectClass *c,void *data) {RISCVCPUClass *mcc =RISCV_CPU_CLASS (c);
@@ -2101,9 +2108,6 @@ static void riscv_cpu_class_init(ObjectClass *c, void *data) cc->gdb_arch_name = riscv_gdb_arch_name; cc->gdb_get_dynamic_xml = riscv_gdb_get_dynamic_xml; -object_class_property_add (c,"marchid" ,"uint64" , cpu_get_marchid, - cpu_set_marchid,NULL ,NULL ); -device_class_set_props (dc, riscv_cpu_properties); }
Signature · 1 line
2.43.0
Quoted 43 lines · Daniel Henrique Barboza
Hi,
This new version fixes all instances of 'const PropertyInfo' added, changing it to 'static const PropertyInfo', like suggested by Richard in v1.
Patches based on Alistair's riscv-to-apply.next. Series is also found here:
https://gitlab.com/danielhb/qemu/-/tree/fix_cpu_opts_v2
Changes from v1:
- changed 'const PropertyInfo' to 'static const PropertyInfo' in all
relevant patches.
- v1 link: https://lore.kernel.org/qemu-riscv/[email protected]/Daniel Henrique Barboza (16):
target/riscv/cpu_cfg.h: removeuser_specandbext_spectarget/riscv: move 'pmu-mask' and 'pmu-num' to riscv_cpu_properties[] target/riscv: makeriscv_cpu_is_generic()public target/riscv: move 'mmu' to riscv_cpu_properties[] target/riscv: move 'pmp' to riscv_cpu_properties[] target/riscv: rework 'priv_spec'
target/riscv: rework 'vext_spec'
target/riscv: move 'vlen' to riscv_cpu_properties[] target/riscv: move 'elen' to riscv_cpu_properties[] target/riscv: createfinalize_features()for KVM target/riscv: move 'cbom_blocksize' to riscv_cpu_properties[] target/riscv: move 'cboz_blocksize' to riscv_cpu_properties[] target/riscv: remove riscv_cpu_options[]target/riscv/cpu.c: move 'mvendorid' to riscv_cpu_properties[]target/riscv/cpu.c: move 'mimpid' to riscv_cpu_properties[]target/riscv/cpu.c: move 'marchid' to riscv_cpu_properties[]target/riscv/cpu.c | 584 +++++++++++++++++++++++++++++------ target/riscv/cpu.h | 7 +- target/riscv/cpu_cfg.h | 4 - target/riscv/kvm/kvm-cpu.c | 94 +++--- target/riscv/kvm/kvm_riscv.h | 1 + target/riscv/tcg/tcg-cpu.c | 63 ---- 6 files changed, 561 insertions(+), 192 deletions(-)
Quoted 4 lines
--
2.43.0
For whole series and TCG part: