Skip to contentSkip to conversation

acpi: i386 tweaks

PATCH Superseded Gerd Hoffmann 3 participants 26 messages May 5, 2020 – May 6, 2020

v4 of 10 Superseded Latest is v10 →

lore
Share & tools
lore
#0 lore raw

v4 cover acpi: i386 tweaks

First batch of microvm patches, some generic acpi stuff. Split the acpi-build.c monster, specifically split the pc and q35 and pci bits into a separate file which we can skip building at some point in the future.

v2 changes: leave acpi-build.c largely as-is, move useful bits to other places to allow them being reused, specifically:

* move isa device generator functions to individual isa devices.
* move fw_cfg generator function to fw_cfg.c

v3 changes: fix rtc, support multiple lpt devices.

v4 changes:
* drop merged patches.
* split rtc crs change to separata patch.
* added two cleanup patches.
* picked up ack & review tags.

take care,
Gerd

Gerd Hoffmann (13):
qtest: allow DSDT acpi table changes
acpi: move aml builder code for rtc device
acpi: rtc: use a single crs range
acpi: serial: don't use _STA method
acpi: move aml builder code for serial device
acpi: parallel: don't use _STA method
acpi: move aml builder code for parallel device
acpi: move aml builder code for floppy device
acpi: move aml builder code for i8042 (kbd+mouse) device
acpi: factor out fw_cfg_add_acpi_dsdt()
acpi: simplify build_isa_devices_aml()
acpi: drop serial/parallel enable bits from dsdt
floppy: make isa_fdc_get_drive_max_chs static

 hw/i386/fw_cfg.h                            |   1 +
 include/hw/block/fdc.h                      |   2 -
 tests/qtest/bios-tables-test-allowed-diff.h |  17 ++
 hw/block/fdc.c                              |  87 +++++-
 hw/char/parallel.c                          |  32 +++
 hw/char/serial-isa.c                        |  32 +++
 hw/i386/acpi-build.c                        | 285 +-------------------
 hw/i386/fw_cfg.c                            |  28 ++
 hw/input/pckbd.c                            |  31 +++
 hw/rtc/mc146818rtc.c                        |  20 ++
 stubs/cmos.c                                |   7 +
 stubs/Makefile.objs                         |   1 +
 12 files changed, 260 insertions(+), 283 deletions(-)
 create mode 100644 stubs/cmos.c
Signature · 1 line
2.18.4
#1 lore raw

PATCH v4 1/13 qtest: allow DSDT acpi table changes

---
 tests/qtest/bios-tables-test-allowed-diff.h | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
tests/qtest/bios-tables-test-allowed-diff.h +17 -0
index dfb8523c8bf4..6a052c50447a 100644
@@ -1 +1,18 @@
 /* List of comma-separated changed AML files to ignore */
+"tests/data/acpi/pc/DSDT",
+"tests/data/acpi/pc/DSDT.acpihmat",
+"tests/data/acpi/pc/DSDT.bridge",
+"tests/data/acpi/pc/DSDT.cphp",
+"tests/data/acpi/pc/DSDT.dimmpxm",
+"tests/data/acpi/pc/DSDT.ipmikcs",
+"tests/data/acpi/pc/DSDT.memhp",
+"tests/data/acpi/pc/DSDT.numamem",
+"tests/data/acpi/q35/DSDT",
+"tests/data/acpi/q35/DSDT.acpihmat",
+"tests/data/acpi/q35/DSDT.bridge",
+"tests/data/acpi/q35/DSDT.cphp",
+"tests/data/acpi/q35/DSDT.dimmpxm",
+"tests/data/acpi/q35/DSDT.ipmibt",
+"tests/data/acpi/q35/DSDT.memhp",
+"tests/data/acpi/q35/DSDT.mmio64",
+"tests/data/acpi/q35/DSDT.numamem",
Signature · 1 line
2.18.4
#2 lore raw

PATCH v4 2/13 acpi: move aml builder code for rtc device

In reply to Gerd Hoffmann
---
 hw/i386/acpi-build.c | 17 -----------------
 hw/rtc/mc146818rtc.c | 22 ++++++++++++++++++++++
 2 files changed, 22 insertions(+), 17 deletions(-)
hw/i386/acpi-build.c +0 -17
index 2e15f6848e7e..0bfa2dd23fcc 100644
@@ -1137,22 +1137,6 @@ static Aml *build_fdc_device_aml(ISADevice *fdc)
     return dev;
 }
 
-static Aml *build_rtc_device_aml(void)
-{
-    Aml *dev;
-    Aml *crs;
-
-    dev = aml_device("RTC");
-    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0B00")));
-    crs = aml_resource_template();
-    aml_append(crs, aml_io(AML_DECODE16, 0x0070, 0x0070, 0x10, 0x02));
-    aml_append(crs, aml_irq_no_flags(8));
-    aml_append(crs, aml_io(AML_DECODE16, 0x0072, 0x0072, 0x02, 0x06));
-    aml_append(dev, aml_name_decl("_CRS", crs));
-
-    return dev;
-}
-
 static Aml *build_kbd_device_aml(void)
 {
     Aml *dev;
@@ -1278,7 +1262,6 @@ static void build_isa_devices_aml(Aml *table)
     Aml *scope = aml_scope("_SB.PCI0.ISA");
     Object *obj = object_resolve_path_type("", TYPE_ISA_BUS, &ambiguous);
 
-    aml_append(scope, build_rtc_device_aml());
     aml_append(scope, build_kbd_device_aml());
     aml_append(scope, build_mouse_device_aml());
     if (fdc) {
hw/rtc/mc146818rtc.c +22 -0
index d18c09911be2..2104e0aa3b14 100644
@@ -27,6 +27,7 @@
 #include "qemu/cutils.h"
 #include "qemu/module.h"
 #include "qemu/bcd.h"
+#include "hw/acpi/aml-build.h"
 #include "hw/irq.h"
 #include "hw/qdev-properties.h"
 #include "qemu/timer.h"
@@ -1007,13 +1008,34 @@ static void rtc_resetdev(DeviceState *d)
     }
 }
 
+static void rtc_build_aml(ISADevice *isadev, Aml *scope)
+{
+    Aml *dev;
+    Aml *crs;
+
+    crs = aml_resource_template();
+    aml_append(crs, aml_io(AML_DECODE16, RTC_ISA_BASE, RTC_ISA_BASE,
+                           0x10, 0x02));
+    aml_append(crs, aml_irq_no_flags(RTC_ISA_IRQ));
+    aml_append(crs, aml_io(AML_DECODE16, RTC_ISA_BASE + 2, RTC_ISA_BASE + 2,
+                           0x02, 0x06));
+
+    dev = aml_device("RTC");
+    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0B00")));
+    aml_append(dev, aml_name_decl("_CRS", crs));
+
+    aml_append(scope, dev);
+}
+
 static void rtc_class_initfn(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
+    ISADeviceClass *isa = ISA_DEVICE_CLASS(klass);
 
     dc->realize = rtc_realizefn;
     dc->reset = rtc_resetdev;
     dc->vmsd = &vmstate_rtc;
+    isa->build_aml = rtc_build_aml;
     device_class_set_props(dc, mc146818rtc_properties);
 }
 
Signature · 1 line
2.18.4
Reviewed-by on v4 2/13
#3 lore raw

Re: [PATCH v4 02/13] acpi: move aml builder code for rtc device

Quoted 1 line · On Tue, 5 May 2020 13:38:32 +0200 Gerd Hoffmann <[email protected]> wrote:
Quoted 87 lines
---
 hw/i386/acpi-build.c | 17 -----------------
 hw/rtc/mc146818rtc.c | 22 ++++++++++++++++++++++
 2 files changed, 22 insertions(+), 17 deletions(-)
hw/i386/acpi-build.c +0 -17
index 2e15f6848e7e..0bfa2dd23fcc 100644
@@ -1137,22 +1137,6 @@ static Aml *build_fdc_device_aml(ISADevice *fdc)
     return dev;
 }
 
-static Aml *build_rtc_device_aml(void)
-{
-    Aml *dev;
-    Aml *crs;
-
-    dev = aml_device("RTC");
-    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0B00")));
-    crs = aml_resource_template();
-    aml_append(crs, aml_io(AML_DECODE16, 0x0070, 0x0070, 0x10, 0x02));
-    aml_append(crs, aml_irq_no_flags(8));
-    aml_append(crs, aml_io(AML_DECODE16, 0x0072, 0x0072, 0x02, 0x06));
-    aml_append(dev, aml_name_decl("_CRS", crs));
-
-    return dev;
-}
-
 static Aml *build_kbd_device_aml(void)
 {
     Aml *dev;
@@ -1278,7 +1262,6 @@ static void build_isa_devices_aml(Aml *table)
     Aml *scope = aml_scope("_SB.PCI0.ISA");
     Object *obj = object_resolve_path_type("", TYPE_ISA_BUS, &ambiguous);
 
-    aml_append(scope, build_rtc_device_aml());
     aml_append(scope, build_kbd_device_aml());
     aml_append(scope, build_mouse_device_aml());
     if (fdc) {
hw/rtc/mc146818rtc.c +22 -0
index d18c09911be2..2104e0aa3b14 100644
@@ -27,6 +27,7 @@
 #include "qemu/cutils.h"
 #include "qemu/module.h"
 #include "qemu/bcd.h"
+#include "hw/acpi/aml-build.h"
 #include "hw/irq.h"
 #include "hw/qdev-properties.h"
 #include "qemu/timer.h"
@@ -1007,13 +1008,34 @@ static void rtc_resetdev(DeviceState *d)
     }
 }
 
+static void rtc_build_aml(ISADevice *isadev, Aml *scope)
+{
+    Aml *dev;
+    Aml *crs;
+
+    crs = aml_resource_template();
+    aml_append(crs, aml_io(AML_DECODE16, RTC_ISA_BASE, RTC_ISA_BASE,
+                           0x10, 0x02));
+    aml_append(crs, aml_irq_no_flags(RTC_ISA_IRQ));
+    aml_append(crs, aml_io(AML_DECODE16, RTC_ISA_BASE + 2, RTC_ISA_BASE + 2,
+                           0x02, 0x06));
+
+    dev = aml_device("RTC");
+    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0B00")));
+    aml_append(dev, aml_name_decl("_CRS", crs));
+
+    aml_append(scope, dev);
+}
+
 static void rtc_class_initfn(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
+    ISADeviceClass *isa = ISA_DEVICE_CLASS(klass);
 
     dc->realize = rtc_realizefn;
     dc->reset = rtc_resetdev;
     dc->vmsd = &vmstate_rtc;
+    isa->build_aml = rtc_build_aml;
     device_class_set_props(dc, mc146818rtc_properties);
 }
 
Reviewed-by on v4 2/13
#4 lore raw

Re: [PATCH v4 02/13] acpi: move aml builder code for rtc device

In reply to Gerd Hoffmann
Quoted 79 lines · Gerd Hoffmann
---
  hw/i386/acpi-build.c | 17 -----------------
  hw/rtc/mc146818rtc.c | 22 ++++++++++++++++++++++
  2 files changed, 22 insertions(+), 17 deletions(-)
hw/i386/acpi-build.c +0 -17
index 2e15f6848e7e..0bfa2dd23fcc 100644
@@ -1137,22 +1137,6 @@ static Aml *build_fdc_device_aml(ISADevice *fdc)
      return dev;
  }
 
-static Aml *build_rtc_device_aml(void)
-{
-    Aml *dev;
-    Aml *crs;
-
-    dev = aml_device("RTC");
-    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0B00")));
-    crs = aml_resource_template();
-    aml_append(crs, aml_io(AML_DECODE16, 0x0070, 0x0070, 0x10, 0x02));
-    aml_append(crs, aml_irq_no_flags(8));
-    aml_append(crs, aml_io(AML_DECODE16, 0x0072, 0x0072, 0x02, 0x06));
-    aml_append(dev, aml_name_decl("_CRS", crs));
-
-    return dev;
-}
-
  static Aml *build_kbd_device_aml(void)
  {
      Aml *dev;
@@ -1278,7 +1262,6 @@ static void build_isa_devices_aml(Aml *table)
      Aml *scope = aml_scope("_SB.PCI0.ISA");
      Object *obj = object_resolve_path_type("", TYPE_ISA_BUS, &ambiguous);
 
-    aml_append(scope, build_rtc_device_aml());
      aml_append(scope, build_kbd_device_aml());
      aml_append(scope, build_mouse_device_aml());
      if (fdc) {
hw/rtc/mc146818rtc.c +20 -0
index d18c09911be2..2104e0aa3b14 100644
@@ -27,6 +27,7 @@
  #include "qemu/cutils.h"
  #include "qemu/module.h"
  #include "qemu/bcd.h"
+#include "hw/acpi/aml-build.h"
  #include "hw/irq.h"
  #include "hw/qdev-properties.h"
  #include "qemu/timer.h"
@@ -1007,13 +1008,34 @@ static void rtc_resetdev(DeviceState *d)
      }
  }
 
+static void rtc_build_aml(ISADevice *isadev, Aml *scope)
+{
+    Aml *dev;
+    Aml *crs;
+
+    crs = aml_resource_template();
+    aml_append(crs, aml_io(AML_DECODE16, RTC_ISA_BASE, RTC_ISA_BASE,
+                           0x10, 0x02));
+    aml_append(crs, aml_irq_no_flags(RTC_ISA_IRQ));
+    aml_append(crs, aml_io(AML_DECODE16, RTC_ISA_BASE + 2, RTC_ISA_BASE + 2,
+                           0x02, 0x06));
+
+    dev = aml_device("RTC");
+    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0B00")));
+    aml_append(dev, aml_name_decl("_CRS", crs));
+
+    aml_append(scope, dev);
+}
+
  static void rtc_class_initfn(ObjectClass *klass, void *data)
  {

hw/rtc/mc146818rtc.c static void rtc_resetdev(DeviceState *d) · line 1041

Quoted 10 lines
hw/rtc/mc146818rtc.c +2 -0
      DeviceClass *dc = DEVICE_CLASS(klass);
+    ISADeviceClass *isa = ISA_DEVICE_CLASS(klass);
 
      dc->realize = rtc_realizefn;
      dc->reset = rtc_resetdev;
      dc->vmsd = &vmstate_rtc;
+    isa->build_aml = rtc_build_aml;
      device_class_set_props(dc, mc146818rtc_properties);
  }
 
#5 lore raw

PATCH v4 3/13 acpi: rtc: use a single crs range

In reply to Gerd Hoffmann

Use a single io range for _CRS instead of two,
following what real hardware does.

---
 hw/rtc/mc146818rtc.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
hw/rtc/mc146818rtc.c +1 -3
index 2104e0aa3b14..47fafcfb7c1d 100644
@@ -1015,10 +1015,8 @@ static void rtc_build_aml(ISADevice *isadev, Aml *scope)
 
     crs = aml_resource_template();
     aml_append(crs, aml_io(AML_DECODE16, RTC_ISA_BASE, RTC_ISA_BASE,
-                           0x10, 0x02));
+                           0x10, 0x08));
     aml_append(crs, aml_irq_no_flags(RTC_ISA_IRQ));
-    aml_append(crs, aml_io(AML_DECODE16, RTC_ISA_BASE + 2, RTC_ISA_BASE + 2,
-                           0x02, 0x06));
 
     dev = aml_device("RTC");
     aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0B00")));
Signature · 1 line
2.18.4
#6 lore raw

Re: [PATCH v4 03/13] acpi: rtc: use a single crs range

Quoted 13 lines · On Tue, 5 May 2020 13:38:33 +0200 Gerd Hoffmann <[email protected]> wrote:

Use a single io range for _CRS instead of two,
following what real hardware does.

---
 hw/rtc/mc146818rtc.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
hw/rtc/mc146818rtc.c +0 -0
index 2104e0aa3b14..47fafcfb7c1d 100644

hw/rtc/mc146818rtc.c static void rtc_build_aml(ISADevice *isadev, Aml *scope) · line 1021

Quoted 8 lines
hw/rtc/mc146818rtc.c +1 -3
@@ -1015,10 +1015,8 @@ static void rtc_build_aml(ISADevice *isadev, Aml *scope)
 
     crs = aml_resource_template();
     aml_append(crs, aml_io(AML_DECODE16, RTC_ISA_BASE, RTC_ISA_BASE,
-                           0x10, 0x02));
+                           0x10, 0x08));
     aml_append(crs, aml_irq_no_flags(RTC_ISA_IRQ));
-    aml_append(crs, aml_io(AML_DECODE16, RTC_ISA_BASE + 2, RTC_ISA_BASE + 2,
-                           0x02, 0x06));

can we just drop the later range as unused? (I don't see where it's actually initialized)

Quoted 3 lines
hw/rtc/mc146818rtc.c +0 -0
     dev = aml_device("RTC");
     aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0B00")));
#7 lore raw

Re: [PATCH v4 03/13] acpi: rtc: use a single crs range

Hi,

Quoted 8 lines

hw/rtc/mc146818rtc.c static void rtc_build_aml(ISADevice *isadev, Aml *scope) · line 1021

Quoted 7 lines

crs = aml_resource_template();
aml_append(crs, aml_io(AML_DECODE16, RTC_ISA_BASE, RTC_ISA_BASE,

hw/rtc/mc146818rtc.c +1 -3
-                           0x10, 0x02));
+                           0x10, 0x08));
     aml_append(crs, aml_irq_no_flags(RTC_ISA_IRQ));
-    aml_append(crs, aml_io(AML_DECODE16, RTC_ISA_BASE + 2, RTC_ISA_BASE + 2,
-                           0x02, 0x06));

can we just drop the later range as unused? (I don't see where it's actually initialized)

I'd rather follow what physical hardware is doing here for better compatibility ...

take care,
Gerd

#8 lore raw

Re: [PATCH v4 03/13] acpi: rtc: use a single crs range

Quoted 9 lines · On Wed, 6 May 2020 10:39:02 +0200 Gerd Hoffmann <[email protected]> wrote:

Hi,

Quoted 7 lines
Quoted 7 lines

crs = aml_resource_template();
aml_append(crs, aml_io(AML_DECODE16, RTC_ISA_BASE, RTC_ISA_BASE,

hw/rtc/mc146818rtc.c +1 -3
-                           0x10, 0x02));
+                           0x10, 0x08));
     aml_append(crs, aml_irq_no_flags(RTC_ISA_IRQ));
-    aml_append(crs, aml_io(AML_DECODE16, RTC_ISA_BASE + 2, RTC_ISA_BASE + 2,
-                           0x02, 0x06));  
Quoted 4 lines
Quoted 1 line

can we just drop the later range as unused? (I don't see where it's actually initialized)

I'd rather follow what physical hardware is doing here for better compatibility ...

maybe add comment here why it doesn't match IO range that RTC actualy provides, otherwise it's looks very confusing

Quoted 4 lines

take care,
Gerd

#9 lore raw

PATCH v4 4/13 acpi: serial: don't use _STA method

In reply to Gerd Hoffmann

The _STA method dates back to the days where we had a static DSDT. The device is listed in the DSDT table unconditionally and the _STA method checks a bit in the isa bridge pci config space to figure whenever a given is isa device is present or not, then evaluates to 0x0f (present) or 0x00 (absent).

These days the DSDT is generated by qemu anyway, so if a device is not present we can simply drop it from the DSDT instead.

---
 hw/i386/acpi-build.c | 32 ++++++++------------------------
 1 file changed, 8 insertions(+), 24 deletions(-)
hw/i386/acpi-build.c +8 -24
index 0bfa2dd23fcc..3a82730a0d19 100644
@@ -1208,50 +1208,34 @@ static Aml *build_lpt_device_aml(void)
     return dev;
 }
 
-static Aml *build_com_device_aml(uint8_t uid)
+static void build_com_device_aml(Aml *scope, uint8_t uid)
 {
     Aml *dev;
     Aml *crs;
-    Aml *method;
-    Aml *if_ctx;
-    Aml *else_ctx;
-    Aml *zero = aml_int(0);
-    Aml *is_present = aml_local(0);
-    const char *enabled_field = "CAEN";
     uint8_t irq = 4;
     uint16_t io_port = 0x03F8;
 
     assert(uid == 1 || uid == 2);
     if (uid == 2) {
-        enabled_field = "CBEN";
         irq = 3;
         io_port = 0x02F8;
     }
+    if (!memory_region_present(get_system_io(), io_port)) {
+        return;
+    }
 
     dev = aml_device("COM%d", uid);
     aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0501")));
     aml_append(dev, aml_name_decl("_UID", aml_int(uid)));
 
-    method = aml_method("_STA", 0, AML_NOTSERIALIZED);
-    aml_append(method, aml_store(aml_name("%s", enabled_field), is_present));
-    if_ctx = aml_if(aml_equal(is_present, zero));
-    {
-        aml_append(if_ctx, aml_return(aml_int(0x00)));
-    }
-    aml_append(method, if_ctx);
-    else_ctx = aml_else();
-    {
-        aml_append(else_ctx, aml_return(aml_int(0x0f)));
-    }
-    aml_append(method, else_ctx);
-    aml_append(dev, method);
+    aml_append(dev, aml_name_decl("_STA", aml_int(0xf)));
 
     crs = aml_resource_template();
     aml_append(crs, aml_io(AML_DECODE16, io_port, io_port, 0x00, 0x08));
     aml_append(crs, aml_irq_no_flags(irq));
     aml_append(dev, aml_name_decl("_CRS", crs));
 
-    return dev;
+    aml_append(scope, dev);
 }
 
 static void build_isa_devices_aml(Aml *table)
@@ -1268,8 +1252,8 @@ static void build_isa_devices_aml(Aml *table)
         aml_append(scope, build_fdc_device_aml(fdc));
     }
     aml_append(scope, build_lpt_device_aml());
-    aml_append(scope, build_com_device_aml(1));
-    aml_append(scope, build_com_device_aml(2));
+    build_com_device_aml(scope, 1);
+    build_com_device_aml(scope, 2);
 
     if (ambiguous) {
         error_report("Multiple ISA busses, unable to define IPMI ACPI data");
Signature · 1 line
2.18.4
#10 lore raw

PATCH v4 5/13 acpi: move aml builder code for serial device

In reply to Gerd Hoffmann

The code uses the isa_serial_io array to figure what the device uid is. Side effect is that acpi antries are not limited to port 1+2 any more, we'll also get entries for ports 3+4.

---
 hw/char/serial-isa.c | 32 ++++++++++++++++++++++++++++++++
 hw/i386/acpi-build.c | 32 --------------------------------
 2 files changed, 32 insertions(+), 32 deletions(-)
hw/char/serial-isa.c +32 -0
index f9b6eed7833d..f7c19a398ced 100644
@@ -27,6 +27,7 @@
 #include "qapi/error.h"
 #include "qemu/module.h"
 #include "sysemu/sysemu.h"
+#include "hw/acpi/aml-build.h"
 #include "hw/char/serial.h"
 #include "hw/isa/isa.h"
 #include "hw/qdev-properties.h"
@@ -81,6 +82,35 @@ static void serial_isa_realizefn(DeviceState *dev, Error **errp)
     isa_register_ioport(isadev, &s->io, isa->iobase);
 }
 
+static void serial_isa_build_aml(ISADevice *isadev, Aml *scope)
+{
+    ISASerialState *isa = ISA_SERIAL(isadev);
+    int i, uid = 0;
+    Aml *dev;
+    Aml *crs;
+
+    for (i = 0; i < ARRAY_SIZE(isa_serial_io); i++) {
+        if (isa->iobase == isa_serial_io[i]) {
+            uid = i + 1;
+        }
+    }
+    if (!uid) {
+        return;
+    }
+
+    crs = aml_resource_template();
+    aml_append(crs, aml_io(AML_DECODE16, isa->iobase, isa->iobase, 0x00, 0x08));
+    aml_append(crs, aml_irq_no_flags(isa->isairq));
+
+    dev = aml_device("COM%d", uid);
+    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0501")));
+    aml_append(dev, aml_name_decl("_UID", aml_int(uid)));
+    aml_append(dev, aml_name_decl("_STA", aml_int(0xf)));
+    aml_append(dev, aml_name_decl("_CRS", crs));
+
+    aml_append(scope, dev);
+}
+
 static const VMStateDescription vmstate_isa_serial = {
     .name = "serial",
     .version_id = 3,
@@ -103,9 +133,11 @@ static Property serial_isa_properties[] = {
 static void serial_isa_class_initfn(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
+    ISADeviceClass *isa = ISA_DEVICE_CLASS(klass);
 
     dc->realize = serial_isa_realizefn;
     dc->vmsd = &vmstate_isa_serial;
+    isa->build_aml = serial_isa_build_aml;
     device_class_set_props(dc, serial_isa_properties);
     set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
 }
hw/i386/acpi-build.c +0 -32
index 3a82730a0d19..0e6a5151f4c3 100644
@@ -1208,36 +1208,6 @@ static Aml *build_lpt_device_aml(void)
     return dev;
 }
 
-static void build_com_device_aml(Aml *scope, uint8_t uid)
-{
-    Aml *dev;
-    Aml *crs;
-    uint8_t irq = 4;
-    uint16_t io_port = 0x03F8;
-
-    assert(uid == 1 || uid == 2);
-    if (uid == 2) {
-        irq = 3;
-        io_port = 0x02F8;
-    }
-    if (!memory_region_present(get_system_io(), io_port)) {
-        return;
-    }
-
-    dev = aml_device("COM%d", uid);
-    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0501")));
-    aml_append(dev, aml_name_decl("_UID", aml_int(uid)));
-
-    aml_append(dev, aml_name_decl("_STA", aml_int(0xf)));
-
-    crs = aml_resource_template();
-    aml_append(crs, aml_io(AML_DECODE16, io_port, io_port, 0x00, 0x08));
-    aml_append(crs, aml_irq_no_flags(irq));
-    aml_append(dev, aml_name_decl("_CRS", crs));
-
-    aml_append(scope, dev);
-}
-
 static void build_isa_devices_aml(Aml *table)
 {
     ISADevice *fdc = pc_find_fdc0();
@@ -1252,8 +1222,6 @@ static void build_isa_devices_aml(Aml *table)
         aml_append(scope, build_fdc_device_aml(fdc));
     }
     aml_append(scope, build_lpt_device_aml());
-    build_com_device_aml(scope, 1);
-    build_com_device_aml(scope, 2);
 
     if (ambiguous) {
         error_report("Multiple ISA busses, unable to define IPMI ACPI data");
Signature · 1 line
2.18.4
#11 lore raw

Re: [PATCH v4 05/13] acpi: move aml builder code for serial device

Quoted 27 lines · Gerd Hoffmann

The code uses the isa_serial_io array to figure what the device uid is. Side effect is that acpi antries are not limited to port 1+2 any more, we'll also get entries for ports 3+4.

---
  hw/char/serial-isa.c | 32 ++++++++++++++++++++++++++++++++
  hw/i386/acpi-build.c | 32 --------------------------------
  2 files changed, 32 insertions(+), 32 deletions(-)
hw/char/serial-isa.c +1 -0
index f9b6eed7833d..f7c19a398ced 100644
@@ -27,6 +27,7 @@
  #include "qapi/error.h"
  #include "qemu/module.h"
  #include "sysemu/sysemu.h"
+#include "hw/acpi/aml-build.h"
  #include "hw/char/serial.h"
  #include "hw/isa/isa.h"
  #include "hw/qdev-properties.h"
@@ -81,6 +82,35 @@ static void serial_isa_realizefn(DeviceState *dev, Error **errp)
      isa_register_ioport(isadev, &s->io, isa->iobase);
  }
 

hw/char/serial-isa.c static void serial_isa_realizefn(DeviceState *dev, Error **errp) · line 94

Quoted 10 lines
hw/char/serial-isa.c +10 -0
+static void serial_isa_build_aml(ISADevice *isadev, Aml *scope)
+{
+    ISASerialState *isa = ISA_SERIAL(isadev);
+    int i, uid = 0;
+    Aml *dev;
+    Aml *crs;
+
+    for (i = 0; i < ARRAY_SIZE(isa_serial_io); i++) {
+        if (isa->iobase == isa_serial_io[i]) {
+            uid = i + 1;

Similarly to the parallel device patch, I'd use "uid = isa->index + 1" instead.

Quoted 85 lines
hw/char/serial-isa.c +21 -0
+        }
+    }
+    if (!uid) {
+        return;
+    }
+
+    crs = aml_resource_template();
+    aml_append(crs, aml_io(AML_DECODE16, isa->iobase, isa->iobase, 0x00, 0x08));
+    aml_append(crs, aml_irq_no_flags(isa->isairq));
+
+    dev = aml_device("COM%d", uid);
+    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0501")));
+    aml_append(dev, aml_name_decl("_UID", aml_int(uid)));
+    aml_append(dev, aml_name_decl("_STA", aml_int(0xf)));
+    aml_append(dev, aml_name_decl("_CRS", crs));
+
+    aml_append(scope, dev);
+}
+
  static const VMStateDescription vmstate_isa_serial = {
      .name = "serial",
      .version_id = 3,
@@ -103,9 +133,11 @@ static Property serial_isa_properties[] = {
  static void serial_isa_class_initfn(ObjectClass *klass, void *data)
  {
      DeviceClass *dc = DEVICE_CLASS(klass);
+    ISADeviceClass *isa = ISA_DEVICE_CLASS(klass);
 
      dc->realize = serial_isa_realizefn;
      dc->vmsd = &vmstate_isa_serial;
+    isa->build_aml = serial_isa_build_aml;
      device_class_set_props(dc, serial_isa_properties);
      set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
  }
hw/i386/acpi-build.c +0 -32
index 3a82730a0d19..0e6a5151f4c3 100644
@@ -1208,36 +1208,6 @@ static Aml *build_lpt_device_aml(void)
      return dev;
  }
 
-static void build_com_device_aml(Aml *scope, uint8_t uid)
-{
-    Aml *dev;
-    Aml *crs;
-    uint8_t irq = 4;
-    uint16_t io_port = 0x03F8;
-
-    assert(uid == 1 || uid == 2);
-    if (uid == 2) {
-        irq = 3;
-        io_port = 0x02F8;
-    }
-    if (!memory_region_present(get_system_io(), io_port)) {
-        return;
-    }
-
-    dev = aml_device("COM%d", uid);
-    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0501")));
-    aml_append(dev, aml_name_decl("_UID", aml_int(uid)));
-
-    aml_append(dev, aml_name_decl("_STA", aml_int(0xf)));
-
-    crs = aml_resource_template();
-    aml_append(crs, aml_io(AML_DECODE16, io_port, io_port, 0x00, 0x08));
-    aml_append(crs, aml_irq_no_flags(irq));
-    aml_append(dev, aml_name_decl("_CRS", crs));
-
-    aml_append(scope, dev);
-}
-
  static void build_isa_devices_aml(Aml *table)
  {
      ISADevice *fdc = pc_find_fdc0();
@@ -1252,8 +1222,6 @@ static void build_isa_devices_aml(Aml *table)
          aml_append(scope, build_fdc_device_aml(fdc));
      }
      aml_append(scope, build_lpt_device_aml());
-    build_com_device_aml(scope, 1);
-    build_com_device_aml(scope, 2);
 
      if (ambiguous) {
          error_report("Multiple ISA busses, unable to define IPMI ACPI data");
#12 lore raw

PATCH v4 6/13 acpi: parallel: don't use _STA method

In reply to Gerd Hoffmann

The _STA method dates back to the days where we had a static DSDT. The device is listed in the DSDT table unconditionally and the _STA method checks a bit in the isa bridge pci config space to figure whenever a given is isa device is present or not, then evaluates to 0x0f (present) or 0x00 (absent).

These days the DSDT is generated by qemu anyway, so if a device is not present we can simply drop it from the DSDT instead.

---
 hw/i386/acpi-build.c | 29 ++++++++---------------------
 1 file changed, 8 insertions(+), 21 deletions(-)
hw/i386/acpi-build.c +8 -21
index 0e6a5151f4c3..2188a2b99d18 100644
@@ -1173,39 +1173,26 @@ static Aml *build_mouse_device_aml(void)
     return dev;
 }
 
-static Aml *build_lpt_device_aml(void)
+static void build_lpt_device_aml(Aml *scope)
 {
     Aml *dev;
     Aml *crs;
-    Aml *method;
-    Aml *if_ctx;
-    Aml *else_ctx;
-    Aml *zero = aml_int(0);
-    Aml *is_present = aml_local(0);
+
+    if (!memory_region_present(get_system_io(), 0x0378)) {
+        return;
+    }
 
     dev = aml_device("LPT");
     aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0400")));
 
-    method = aml_method("_STA", 0, AML_NOTSERIALIZED);
-    aml_append(method, aml_store(aml_name("LPEN"), is_present));
-    if_ctx = aml_if(aml_equal(is_present, zero));
-    {
-        aml_append(if_ctx, aml_return(aml_int(0x00)));
-    }
-    aml_append(method, if_ctx);
-    else_ctx = aml_else();
-    {
-        aml_append(else_ctx, aml_return(aml_int(0x0f)));
-    }
-    aml_append(method, else_ctx);
-    aml_append(dev, method);
+    aml_append(dev, aml_name_decl("_STA", aml_int(0xf)));
 
     crs = aml_resource_template();
     aml_append(crs, aml_io(AML_DECODE16, 0x0378, 0x0378, 0x08, 0x08));
     aml_append(crs, aml_irq_no_flags(7));
     aml_append(dev, aml_name_decl("_CRS", crs));
 
-    return dev;
+    aml_append(scope, dev);
 }
 
 static void build_isa_devices_aml(Aml *table)
@@ -1221,7 +1208,7 @@ static void build_isa_devices_aml(Aml *table)
     if (fdc) {
         aml_append(scope, build_fdc_device_aml(fdc));
     }
-    aml_append(scope, build_lpt_device_aml());
+    build_lpt_device_aml(scope);
 
     if (ambiguous) {
         error_report("Multiple ISA busses, unable to define IPMI ACPI data");
Signature · 1 line
2.18.4
#13 lore raw

PATCH v4 7/13 acpi: move aml builder code for parallel device

In reply to Gerd Hoffmann

Also adds support for multiple LPT devices.

---
 hw/char/parallel.c   | 32 ++++++++++++++++++++++++++++++++
 hw/i386/acpi-build.c | 23 -----------------------
 2 files changed, 32 insertions(+), 23 deletions(-)
hw/char/parallel.c +32 -0
index 8dd67d13759b..bc6b55b3b910 100644
@@ -28,6 +28,7 @@
 #include "qemu/module.h"
 #include "chardev/char-parallel.h"
 #include "chardev/char-fe.h"
+#include "hw/acpi/aml-build.h"
 #include "hw/irq.h"
 #include "hw/isa/isa.h"
 #include "hw/qdev-properties.h"
@@ -568,6 +569,35 @@ static void parallel_isa_realizefn(DeviceState *dev, Error **errp)
                              s, "parallel");
 }
 
+static void parallel_isa_build_aml(ISADevice *isadev, Aml *scope)
+{
+    ISAParallelState *isa = ISA_PARALLEL(isadev);
+    int i, uid = 0;
+    Aml *dev;
+    Aml *crs;
+
+    for (i = 0; i < ARRAY_SIZE(isa_parallel_io); i++) {
+        if (isa->iobase == isa_parallel_io[i]) {
+            uid = i + 1;
+        }
+    }
+    if (!uid) {
+        return;
+    }
+
+    crs = aml_resource_template();
+    aml_append(crs, aml_io(AML_DECODE16, isa->iobase, isa->iobase, 0x08, 0x08));
+    aml_append(crs, aml_irq_no_flags(isa->isairq));
+
+    dev = aml_device("LPT%d", uid);
+    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0400")));
+    aml_append(dev, aml_name_decl("_UID", aml_int(uid)));
+    aml_append(dev, aml_name_decl("_STA", aml_int(0xf)));
+    aml_append(dev, aml_name_decl("_CRS", crs));
+
+    aml_append(scope, dev);
+}
+
 /* Memory mapped interface */
 static uint64_t parallel_mm_readfn(void *opaque, hwaddr addr, unsigned size)
 {
@@ -624,9 +654,11 @@ static Property parallel_isa_properties[] = {
 static void parallel_isa_class_initfn(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
+    ISADeviceClass *isa = ISA_DEVICE_CLASS(klass);
 
     dc->realize = parallel_isa_realizefn;
     dc->vmsd = &vmstate_parallel_isa;
+    isa->build_aml = parallel_isa_build_aml;
     device_class_set_props(dc, parallel_isa_properties);
     set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
 }
hw/i386/acpi-build.c +0 -23
index 2188a2b99d18..443db94deb5b 100644
@@ -1173,28 +1173,6 @@ static Aml *build_mouse_device_aml(void)
     return dev;
 }
 
-static void build_lpt_device_aml(Aml *scope)
-{
-    Aml *dev;
-    Aml *crs;
-
-    if (!memory_region_present(get_system_io(), 0x0378)) {
-        return;
-    }
-
-    dev = aml_device("LPT");
-    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0400")));
-
-    aml_append(dev, aml_name_decl("_STA", aml_int(0xf)));
-
-    crs = aml_resource_template();
-    aml_append(crs, aml_io(AML_DECODE16, 0x0378, 0x0378, 0x08, 0x08));
-    aml_append(crs, aml_irq_no_flags(7));
-    aml_append(dev, aml_name_decl("_CRS", crs));
-
-    aml_append(scope, dev);
-}
-
 static void build_isa_devices_aml(Aml *table)
 {
     ISADevice *fdc = pc_find_fdc0();
@@ -1208,7 +1186,6 @@ static void build_isa_devices_aml(Aml *table)
     if (fdc) {
         aml_append(scope, build_fdc_device_aml(fdc));
     }
-    build_lpt_device_aml(scope);
 
     if (ambiguous) {
         error_report("Multiple ISA busses, unable to define IPMI ACPI data");
Signature · 1 line
2.18.4
#14 lore raw

Re: [PATCH v4 07/13] acpi: move aml builder code for parallel device

Hi Gerd,

Quoted 25 lines · Gerd Hoffmann

Also adds support for multiple LPT devices.

---
  hw/char/parallel.c   | 32 ++++++++++++++++++++++++++++++++
  hw/i386/acpi-build.c | 23 -----------------------
  2 files changed, 32 insertions(+), 23 deletions(-)
hw/char/parallel.c +1 -0
index 8dd67d13759b..bc6b55b3b910 100644
@@ -28,6 +28,7 @@
  #include "qemu/module.h"
  #include "chardev/char-parallel.h"
  #include "chardev/char-fe.h"
+#include "hw/acpi/aml-build.h"
  #include "hw/irq.h"
  #include "hw/isa/isa.h"
  #include "hw/qdev-properties.h"
@@ -568,6 +569,35 @@ static void parallel_isa_realizefn(DeviceState *dev, Error **errp)
                               s, "parallel");
  }
 

hw/char/parallel.c static void parallel_isa_realizefn(DeviceState *dev, Error **errp) · line 581

Quoted 10 lines
hw/char/parallel.c +10 -0
+static void parallel_isa_build_aml(ISADevice *isadev, Aml *scope)
+{
+    ISAParallelState *isa = ISA_PARALLEL(isadev);
+    int i, uid = 0;
+    Aml *dev;
+    Aml *crs;
+
+    for (i = 0; i < ARRAY_SIZE(isa_parallel_io); i++) {
+        if (isa->iobase == isa_parallel_io[i]) {
+            uid = i + 1;

I'm not sure about this check, as we can create a ISA device setting manually index & iobase. What about using simply "uid = isa->index + 1" instead?

Quoted 76 lines
hw/char/parallel.c +21 -0
+        }
+    }
+    if (!uid) {
+        return;
+    }
+
+    crs = aml_resource_template();
+    aml_append(crs, aml_io(AML_DECODE16, isa->iobase, isa->iobase, 0x08, 0x08));
+    aml_append(crs, aml_irq_no_flags(isa->isairq));
+
+    dev = aml_device("LPT%d", uid);
+    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0400")));
+    aml_append(dev, aml_name_decl("_UID", aml_int(uid)));
+    aml_append(dev, aml_name_decl("_STA", aml_int(0xf)));
+    aml_append(dev, aml_name_decl("_CRS", crs));
+
+    aml_append(scope, dev);
+}
+
  /* Memory mapped interface */
  static uint64_t parallel_mm_readfn(void *opaque, hwaddr addr, unsigned size)
  {
@@ -624,9 +654,11 @@ static Property parallel_isa_properties[] = {
  static void parallel_isa_class_initfn(ObjectClass *klass, void *data)
  {
      DeviceClass *dc = DEVICE_CLASS(klass);
+    ISADeviceClass *isa = ISA_DEVICE_CLASS(klass);
 
      dc->realize = parallel_isa_realizefn;
      dc->vmsd = &vmstate_parallel_isa;
+    isa->build_aml = parallel_isa_build_aml;
      device_class_set_props(dc, parallel_isa_properties);
      set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
  }
hw/i386/acpi-build.c +0 -23
index 2188a2b99d18..443db94deb5b 100644
@@ -1173,28 +1173,6 @@ static Aml *build_mouse_device_aml(void)
      return dev;
  }
 
-static void build_lpt_device_aml(Aml *scope)
-{
-    Aml *dev;
-    Aml *crs;
-
-    if (!memory_region_present(get_system_io(), 0x0378)) {
-        return;
-    }
-
-    dev = aml_device("LPT");
-    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0400")));
-
-    aml_append(dev, aml_name_decl("_STA", aml_int(0xf)));
-
-    crs = aml_resource_template();
-    aml_append(crs, aml_io(AML_DECODE16, 0x0378, 0x0378, 0x08, 0x08));
-    aml_append(crs, aml_irq_no_flags(7));
-    aml_append(dev, aml_name_decl("_CRS", crs));
-
-    aml_append(scope, dev);
-}
-
  static void build_isa_devices_aml(Aml *table)
  {
      ISADevice *fdc = pc_find_fdc0();
@@ -1208,7 +1186,6 @@ static void build_isa_devices_aml(Aml *table)
      if (fdc) {
          aml_append(scope, build_fdc_device_aml(fdc));
      }
-    build_lpt_device_aml(scope);
 
      if (ambiguous) {
          error_report("Multiple ISA busses, unable to define IPMI ACPI data");
#15 lore raw

Re: [PATCH v4 07/13] acpi: move aml builder code for parallel device

Quoted 6 lines
Quoted 6 lines
hw/char/parallel.c +6 -0
+static void parallel_isa_build_aml(ISADevice *isadev, Aml *scope)
+{
+    ISAParallelState *isa = ISA_PARALLEL(isadev);
+    int i, uid = 0;
+    Aml *dev;
+    Aml *crs;
Quoted 8 lines

hw/char/parallel.c static void parallel_isa_realizefn(DeviceState *dev, Error **errp) · line 581

Quoted 4 lines
hw/char/parallel.c +4 -0
+
+    for (i = 0; i < ARRAY_SIZE(isa_parallel_io); i++) {
+        if (isa->iobase == isa_parallel_io[i]) {
+            uid = i + 1;

I'm not sure about this check, as we can create a ISA device setting manually index & iobase. What about using simply "uid = isa->index + 1" instead?

Looking at the code I see isa->index is assigned unconditionally. I misremembered that detail. So, yes, simply using isa->index should work fine even with '-device isa-serial,iobase=<something>". I'll fix it for both serial and parallel.

cheers,
Gerd

#16 lore raw

PATCH v4 8/13 acpi: move aml builder code for floppy device

In reply to Gerd Hoffmann
---
 hw/block/fdc.c       | 83 ++++++++++++++++++++++++++++++++++++++++++++
 hw/i386/acpi-build.c | 83 --------------------------------------------
 stubs/cmos.c         |  7 ++++
 stubs/Makefile.objs  |  1 +
 4 files changed, 91 insertions(+), 83 deletions(-)
 create mode 100644 stubs/cmos.c
hw/block/fdc.c +83 -0
index 9628cc171ef8..40faa088b5f7 100644
@@ -32,6 +32,8 @@
 #include "qapi/error.h"
 #include "qemu/error-report.h"
 #include "qemu/timer.h"
+#include "hw/i386/pc.h"
+#include "hw/acpi/aml-build.h"
 #include "hw/irq.h"
 #include "hw/isa/isa.h"
 #include "hw/qdev-properties.h"
@@ -2765,6 +2767,85 @@ void isa_fdc_get_drive_max_chs(FloppyDriveType type,
     (*maxc)--;
 }
 
+static Aml *build_fdinfo_aml(int idx, FloppyDriveType type)
+{
+    Aml *dev, *fdi;
+    uint8_t maxc, maxh, maxs;
+
+    isa_fdc_get_drive_max_chs(type, &maxc, &maxh, &maxs);
+
+    dev = aml_device("FLP%c", 'A' + idx);
+
+    aml_append(dev, aml_name_decl("_ADR", aml_int(idx)));
+
+    fdi = aml_package(16);
+    aml_append(fdi, aml_int(idx));  /* Drive Number */
+    aml_append(fdi,
+        aml_int(cmos_get_fd_drive_type(type)));  /* Device Type */
+    /*
+     * the values below are the limits of the drive, and are thus independent
+     * of the inserted media
+     */
+    aml_append(fdi, aml_int(maxc));  /* Maximum Cylinder Number */
+    aml_append(fdi, aml_int(maxs));  /* Maximum Sector Number */
+    aml_append(fdi, aml_int(maxh));  /* Maximum Head Number */
+    /*
+     * SeaBIOS returns the below values for int 0x13 func 0x08 regardless of
+     * the drive type, so shall we
+     */
+    aml_append(fdi, aml_int(0xAF));  /* disk_specify_1 */
+    aml_append(fdi, aml_int(0x02));  /* disk_specify_2 */
+    aml_append(fdi, aml_int(0x25));  /* disk_motor_wait */
+    aml_append(fdi, aml_int(0x02));  /* disk_sector_siz */
+    aml_append(fdi, aml_int(0x12));  /* disk_eot */
+    aml_append(fdi, aml_int(0x1B));  /* disk_rw_gap */
+    aml_append(fdi, aml_int(0xFF));  /* disk_dtl */
+    aml_append(fdi, aml_int(0x6C));  /* disk_formt_gap */
+    aml_append(fdi, aml_int(0xF6));  /* disk_fill */
+    aml_append(fdi, aml_int(0x0F));  /* disk_head_sttl */
+    aml_append(fdi, aml_int(0x08));  /* disk_motor_strt */
+
+    aml_append(dev, aml_name_decl("_FDI", fdi));
+    return dev;
+}
+
+static void fdc_isa_build_aml(ISADevice *isadev, Aml *scope)
+{
+    Aml *dev;
+    Aml *crs;
+    int i;
+
+#define ACPI_FDE_MAX_FD 4
+    uint32_t fde_buf[5] = {
+        0, 0, 0, 0,     /* presence of floppy drives #0 - #3 */
+        cpu_to_le32(2)  /* tape presence (2 == never present) */
+    };
+
+    crs = aml_resource_template();
+    aml_append(crs, aml_io(AML_DECODE16, 0x03F2, 0x03F2, 0x00, 0x04));
+    aml_append(crs, aml_io(AML_DECODE16, 0x03F7, 0x03F7, 0x00, 0x01));
+    aml_append(crs, aml_irq_no_flags(6));
+    aml_append(crs,
+        aml_dma(AML_COMPATIBILITY, AML_NOTBUSMASTER, AML_TRANSFER8, 2));
+
+    dev = aml_device("FDC0");
+    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0700")));
+    aml_append(dev, aml_name_decl("_CRS", crs));
+
+    for (i = 0; i < MIN(MAX_FD, ACPI_FDE_MAX_FD); i++) {
+        FloppyDriveType type = isa_fdc_get_drive_type(isadev, i);
+
+        if (type < FLOPPY_DRIVE_TYPE_NONE) {
+            fde_buf[i] = cpu_to_le32(1);  /* drive present */
+            aml_append(dev, build_fdinfo_aml(i, type));
+        }
+    }
+    aml_append(dev, aml_name_decl("_FDE",
+               aml_buffer(sizeof(fde_buf), (uint8_t *)fde_buf)));
+
+    aml_append(scope, dev);
+}
+
 static const VMStateDescription vmstate_isa_fdc ={
     .name = "fdc",
     .version_id = 2,
@@ -2798,11 +2879,13 @@ static Property isa_fdc_properties[] = {
 static void isabus_fdc_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
+    ISADeviceClass *isa = ISA_DEVICE_CLASS(klass);
 
     dc->realize = isabus_fdc_realize;
     dc->fw_name = "fdc";
     dc->reset = fdctrl_external_reset_isa;
     dc->vmsd = &vmstate_isa_fdc;
+    isa->build_aml = fdc_isa_build_aml;
     device_class_set_props(dc, isa_fdc_properties);
     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
 }
hw/i386/acpi-build.c +0 -83

101 lines not on this page · raw message

stubs/cmos.c new file +7 -0
new file mode 100644
index 000000000000..416cbe4055ff
@@ -0,0 +1,7 @@
+#include "qemu/osdep.h"
+#include "hw/i386/pc.h"
+
+int cmos_get_fd_drive_type(FloppyDriveType fd0)
+{
+    return 0;
+}
stubs/Makefile.objs +1 -0
index 45be5dc0ed78..3cbe472d1c6c 100644
@@ -3,6 +3,7 @@ stub-obj-y += bdrv-next-monitor-owned.o
 stub-obj-y += blk-commit-all.o
 stub-obj-y += blockdev-close-all-bdrv-states.o
 stub-obj-y += clock-warp.o
+stub-obj-y += cmos.o
 stub-obj-y += cpu-get-clock.o
 stub-obj-y += cpu-get-icount.o
 stub-obj-y += dump.o
Signature · 1 line
2.18.4
#17 lore raw

PATCH v4 9/13 acpi: move aml builder code for i8042 (kbd+mouse) device

In reply to Gerd Hoffmann
---
 hw/i386/acpi-build.c | 39 ---------------------------------------
 hw/input/pckbd.c     | 31 +++++++++++++++++++++++++++++++
 2 files changed, 31 insertions(+), 39 deletions(-)
hw/i386/acpi-build.c +0 -39
index 775936e28b9a..829e20664fff 100644
@@ -1058,42 +1058,6 @@ static void build_hpet_aml(Aml *table)
     aml_append(table, scope);
 }
 
-static Aml *build_kbd_device_aml(void)
-{
-    Aml *dev;
-    Aml *crs;
-
-    dev = aml_device("KBD");
-    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0303")));
-
-    aml_append(dev, aml_name_decl("_STA", aml_int(0xf)));
-
-    crs = aml_resource_template();
-    aml_append(crs, aml_io(AML_DECODE16, 0x0060, 0x0060, 0x01, 0x01));
-    aml_append(crs, aml_io(AML_DECODE16, 0x0064, 0x0064, 0x01, 0x01));
-    aml_append(crs, aml_irq_no_flags(1));
-    aml_append(dev, aml_name_decl("_CRS", crs));
-
-    return dev;
-}
-
-static Aml *build_mouse_device_aml(void)
-{
-    Aml *dev;
-    Aml *crs;
-
-    dev = aml_device("MOU");
-    aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0F13")));
-
-    aml_append(dev, aml_name_decl("_STA", aml_int(0xf)));
-
-    crs = aml_resource_template();
-    aml_append(crs, aml_irq_no_flags(12));
-    aml_append(dev, aml_name_decl("_CRS", crs));
-
-    return dev;
-}
-
 static void build_isa_devices_aml(Aml *table)
 {
     bool ambiguous;
@@ -1101,9 +1065,6 @@ static void build_isa_devices_aml(Aml *table)
     Aml *scope = aml_scope("_SB.PCI0.ISA");
     Object *obj = object_resolve_path_type("", TYPE_ISA_BUS, &ambiguous);
 
-    aml_append(scope, build_kbd_device_aml());
-    aml_append(scope, build_mouse_device_aml());
-
     if (ambiguous) {
         error_report("Multiple ISA busses, unable to define IPMI ACPI data");
     } else if (!obj) {
hw/input/pckbd.c +31 -0
index 60a41303203a..29d633ca9478 100644
@@ -26,6 +26,7 @@
 #include "qemu/log.h"
 #include "hw/isa/isa.h"
 #include "migration/vmstate.h"
+#include "hw/acpi/aml-build.h"
 #include "hw/input/ps2.h"
 #include "hw/irq.h"
 #include "hw/input/i8042.h"
@@ -561,12 +562,42 @@ static void i8042_realizefn(DeviceState *dev, Error **errp)
     qemu_register_reset(kbd_reset, s);
 }
 
+static void i8042_build_aml(ISADevice *isadev, Aml *scope)
+{
+    Aml *kbd;
+    Aml *mou;
+    Aml *crs;
+
+    crs = aml_resource_template();
+    aml_append(crs, aml_io(AML_DECODE16, 0x0060, 0x0060, 0x01, 0x01));
+    aml_append(crs, aml_io(AML_DECODE16, 0x0064, 0x0064, 0x01, 0x01));
+    aml_append(crs, aml_irq_no_flags(1));
+
+    kbd = aml_device("KBD");
+    aml_append(kbd, aml_name_decl("_HID", aml_eisaid("PNP0303")));
+    aml_append(kbd, aml_name_decl("_STA", aml_int(0xf)));
+    aml_append(kbd, aml_name_decl("_CRS", crs));
+
+    crs = aml_resource_template();
+    aml_append(crs, aml_irq_no_flags(12));
+
+    mou = aml_device("MOU");
+    aml_append(mou, aml_name_decl("_HID", aml_eisaid("PNP0F13")));
+    aml_append(mou, aml_name_decl("_STA", aml_int(0xf)));
+    aml_append(mou, aml_name_decl("_CRS", crs));
+
+    aml_append(scope, kbd);
+    aml_append(scope, mou);
+}
+
 static void i8042_class_initfn(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);
+    ISADeviceClass *isa = ISA_DEVICE_CLASS(klass);
 
     dc->realize = i8042_realizefn;
     dc->vmsd = &vmstate_kbd_isa;
+    isa->build_aml = i8042_build_aml;
     set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
 }
 
Signature · 1 line
2.18.4
#18 lore raw

PATCH v4 10/13 acpi: factor out fw_cfg_add_acpi_dsdt()

In reply to Gerd Hoffmann

Add helper function to add fw_cfg device,
also move code to hw/i386/fw_cfg.c.

---
 hw/i386/fw_cfg.h     |  1 +
 hw/i386/acpi-build.c | 24 +-----------------------
 hw/i386/fw_cfg.c     | 28 ++++++++++++++++++++++++++++
 3 files changed, 30 insertions(+), 23 deletions(-)
hw/i386/fw_cfg.h +1 -0
index 9e742787792b..275f15c1c5e8 100644
@@ -25,5 +25,6 @@ FWCfgState *fw_cfg_arch_create(MachineState *ms,
                                uint16_t apic_id_limit);
 void fw_cfg_build_smbios(MachineState *ms, FWCfgState *fw_cfg);
 void fw_cfg_build_feature_control(MachineState *ms, FWCfgState *fw_cfg);
+void fw_cfg_add_acpi_dsdt(Aml *scope, FWCfgState *fw_cfg);
 
 #endif
hw/i386/acpi-build.c +1 -23
index 829e20664fff..cb3913d2ee76 100644
@@ -1880,30 +1880,8 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
 
     /* create fw_cfg node, unconditionally */
     {
-        /* when using port i/o, the 8-bit data register *always* overlaps
-         * with half of the 16-bit control register. Hence, the total size
-         * of the i/o region used is FW_CFG_CTL_SIZE; when using DMA, the
-         * DMA control register is located at FW_CFG_DMA_IO_BASE + 4 */
-        uint8_t io_size = object_property_get_bool(OBJECT(x86ms->fw_cfg),
-                                                   "dma_enabled", NULL) ?
-                          ROUND_UP(FW_CFG_CTL_SIZE, 4) + sizeof(dma_addr_t) :
-                          FW_CFG_CTL_SIZE;
-
         scope = aml_scope("\\_SB.PCI0");
-        dev = aml_device("FWCF");
-
-        aml_append(dev, aml_name_decl("_HID", aml_string("QEMU0002")));
-
-        /* device present, functioning, decoding, not shown in UI */
-        aml_append(dev, aml_name_decl("_STA", aml_int(0xB)));
-
-        crs = aml_resource_template();
-        aml_append(crs,
-            aml_io(AML_DECODE16, FW_CFG_IO_BASE, FW_CFG_IO_BASE, 0x01, io_size)
-        );
-        aml_append(dev, aml_name_decl("_CRS", crs));
-
-        aml_append(scope, dev);
+        fw_cfg_add_acpi_dsdt(scope, x86ms->fw_cfg);
         aml_append(dsdt, scope);
     }
 
hw/i386/fw_cfg.c +28 -0
index da60ada59462..c55abfb01abb 100644
@@ -15,6 +15,7 @@
 #include "qemu/osdep.h"
 #include "sysemu/numa.h"
 #include "hw/acpi/acpi.h"
+#include "hw/acpi/aml-build.h"
 #include "hw/firmware/smbios.h"
 #include "hw/i386/fw_cfg.h"
 #include "hw/timer/hpet.h"
@@ -179,3 +180,30 @@ void fw_cfg_build_feature_control(MachineState *ms, FWCfgState *fw_cfg)
     *val = cpu_to_le64(feature_control_bits | FEATURE_CONTROL_LOCKED);
     fw_cfg_add_file(fw_cfg, "etc/msr_feature_control", val, sizeof(*val));
 }
+
+void fw_cfg_add_acpi_dsdt(Aml *scope, FWCfgState *fw_cfg)
+{
+    /*
+     * when using port i/o, the 8-bit data register *always* overlaps
+     * with half of the 16-bit control register. Hence, the total size
+     * of the i/o region used is FW_CFG_CTL_SIZE; when using DMA, the
+     * DMA control register is located at FW_CFG_DMA_IO_BASE + 4
+     */
+    Object *obj = OBJECT(fw_cfg);
+    uint8_t io_size = object_property_get_bool(obj, "dma_enabled", NULL) ?
+        ROUND_UP(FW_CFG_CTL_SIZE, 4) + sizeof(dma_addr_t) :
+        FW_CFG_CTL_SIZE;
+    Aml *dev = aml_device("FWCF");
+    Aml *crs = aml_resource_template();
+
+    aml_append(dev, aml_name_decl("_HID", aml_string("QEMU0002")));
+
+    /* device present, functioning, decoding, not shown in UI */
+    aml_append(dev, aml_name_decl("_STA", aml_int(0xB)));
+
+    aml_append(crs,
+        aml_io(AML_DECODE16, FW_CFG_IO_BASE, FW_CFG_IO_BASE, 0x01, io_size));
+
+    aml_append(dev, aml_name_decl("_CRS", crs));
+    aml_append(scope, dev);
+}
Signature · 1 line
2.18.4
#19 lore raw

PATCH v4 11/13 acpi: simplify build_isa_devices_aml()

In reply to Gerd Hoffmann

x86 machines can have a single ISA bus only.

---
 hw/i386/acpi-build.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)
hw/i386/acpi-build.c +5 -10
index cb3913d2ee76..1922868f3401 100644
@@ -1061,19 +1061,14 @@ static void build_hpet_aml(Aml *table)
 static void build_isa_devices_aml(Aml *table)
 {
     bool ambiguous;
-
-    Aml *scope = aml_scope("_SB.PCI0.ISA");
     Object *obj = object_resolve_path_type("", TYPE_ISA_BUS, &ambiguous);
+    Aml *scope;
 
-    if (ambiguous) {
-        error_report("Multiple ISA busses, unable to define IPMI ACPI data");
-    } else if (!obj) {
-        error_report("No ISA bus, unable to define IPMI ACPI data");
-    } else {
-        build_acpi_ipmi_devices(scope, BUS(obj), "\\_SB.PCI0.ISA");
-        isa_build_aml(ISA_BUS(obj), scope);
-    }
+    assert(obj && !ambiguous);
 
+    scope = aml_scope("_SB.PCI0.ISA");
+    build_acpi_ipmi_devices(scope, BUS(obj), "\\_SB.PCI0.ISA");
+    isa_build_aml(ISA_BUS(obj), scope);
     aml_append(table, scope);
 }
 
Signature · 1 line
2.18.4
Reviewed-by on v4 11/13
#20 lore raw

Re: [PATCH v4 11/13] acpi: simplify build_isa_devices_aml()

Quoted 3 lines · On Tue, 5 May 2020 13:38:41 +0200 Gerd Hoffmann <[email protected]> wrote:

x86 machines can have a single ISA bus only.

Quoted 33 lines
---
 hw/i386/acpi-build.c | 15 +++++----------
 1 file changed, 5 insertions(+), 10 deletions(-)
hw/i386/acpi-build.c +5 -10
index cb3913d2ee76..1922868f3401 100644
@@ -1061,19 +1061,14 @@ static void build_hpet_aml(Aml *table)
 static void build_isa_devices_aml(Aml *table)
 {
     bool ambiguous;
-
-    Aml *scope = aml_scope("_SB.PCI0.ISA");
     Object *obj = object_resolve_path_type("", TYPE_ISA_BUS, &ambiguous);
+    Aml *scope;
 
-    if (ambiguous) {
-        error_report("Multiple ISA busses, unable to define IPMI ACPI data");
-    } else if (!obj) {
-        error_report("No ISA bus, unable to define IPMI ACPI data");
-    } else {
-        build_acpi_ipmi_devices(scope, BUS(obj), "\\_SB.PCI0.ISA");
-        isa_build_aml(ISA_BUS(obj), scope);
-    }
+    assert(obj && !ambiguous);
 
+    scope = aml_scope("_SB.PCI0.ISA");
+    build_acpi_ipmi_devices(scope, BUS(obj), "\\_SB.PCI0.ISA");
+    isa_build_aml(ISA_BUS(obj), scope);
     aml_append(table, scope);
 }
 
Reviewed-by on v4 11/13
#21 lore raw

Re: [PATCH v4 11/13] acpi: simplify build_isa_devices_aml()

In reply to Gerd Hoffmann
Quoted 1 line · Gerd Hoffmann

x86 machines can have a single ISA bus only.

Quoted 36 lines
---
  hw/i386/acpi-build.c | 15 +++++----------
  1 file changed, 5 insertions(+), 10 deletions(-)
hw/i386/acpi-build.c +5 -10
index cb3913d2ee76..1922868f3401 100644
@@ -1061,19 +1061,14 @@ static void build_hpet_aml(Aml *table)
  static void build_isa_devices_aml(Aml *table)
  {
      bool ambiguous;
-
-    Aml *scope = aml_scope("_SB.PCI0.ISA");
      Object *obj = object_resolve_path_type("", TYPE_ISA_BUS, &ambiguous);
+    Aml *scope;
 
-    if (ambiguous) {
-        error_report("Multiple ISA busses, unable to define IPMI ACPI data");
-    } else if (!obj) {
-        error_report("No ISA bus, unable to define IPMI ACPI data");
-    } else {
-        build_acpi_ipmi_devices(scope, BUS(obj), "\\_SB.PCI0.ISA");
-        isa_build_aml(ISA_BUS(obj), scope);
-    }
+    assert(obj && !ambiguous);
 
+    scope = aml_scope("_SB.PCI0.ISA");
+    build_acpi_ipmi_devices(scope, BUS(obj), "\\_SB.PCI0.ISA");
+    isa_build_aml(ISA_BUS(obj), scope);
      aml_append(table, scope);
  }
 
#22 lore raw

PATCH v4 12/13 acpi: drop serial/parallel enable bits from dsdt

In reply to Gerd Hoffmann

The _STA methods for COM+LPT used to reference them, but that isn't the case any more.

---
 hw/i386/acpi-build.c | 23 -----------------------
 1 file changed, 23 deletions(-)
hw/i386/acpi-build.c +0 -23
index 1922868f3401..765409a90eb6 100644
@@ -1437,15 +1437,6 @@ static void build_q35_isa_bridge(Aml *table)
     aml_append(field, aml_named_field("LPTD", 2));
     aml_append(dev, field);
 
-    aml_append(dev, aml_operation_region("LPCE", AML_PCI_CONFIG,
-                                         aml_int(0x82), 0x02));
-    /* enable bits */
-    field = aml_field("LPCE", AML_ANY_ACC, AML_NOLOCK, AML_PRESERVE);
-    aml_append(field, aml_named_field("CAEN", 1));
-    aml_append(field, aml_named_field("CBEN", 1));
-    aml_append(field, aml_named_field("LPEN", 1));
-    aml_append(dev, field);
-
     aml_append(scope, dev);
     aml_append(table, scope);
 }
@@ -1469,7 +1460,6 @@ static void build_piix4_isa_bridge(Aml *table)
 {
     Aml *dev;
     Aml *scope;
-    Aml *field;
 
     scope =  aml_scope("_SB.PCI0");
     dev = aml_device("ISA");
@@ -1478,19 +1468,6 @@ static void build_piix4_isa_bridge(Aml *table)
     /* PIIX PCI to ISA irq remapping */
     aml_append(dev, aml_operation_region("P40C", AML_PCI_CONFIG,
                                          aml_int(0x60), 0x04));
-    /* enable bits */
-    field = aml_field("^PX13.P13C", AML_ANY_ACC, AML_NOLOCK, AML_PRESERVE);
-    /* Offset(0x5f),, 7, */
-    aml_append(field, aml_reserved_field(0x2f8));
-    aml_append(field, aml_reserved_field(7));
-    aml_append(field, aml_named_field("LPEN", 1));
-    /* Offset(0x67),, 3, */
-    aml_append(field, aml_reserved_field(0x38));
-    aml_append(field, aml_reserved_field(3));
-    aml_append(field, aml_named_field("CAEN", 1));
-    aml_append(field, aml_reserved_field(3));
-    aml_append(field, aml_named_field("CBEN", 1));
-    aml_append(dev, field);
 
     aml_append(scope, dev);
     aml_append(table, scope);
Signature · 1 line
2.18.4
#23 lore raw

Re: [PATCH v4 12/13] acpi: drop serial/parallel enable bits from dsdt

Quoted 13 lines · On Tue, 5 May 2020 13:38:42 +0200 Gerd Hoffmann <[email protected]> wrote:

The _STA methods for COM+LPT used to reference them, but that isn't the case any more.

---
 hw/i386/acpi-build.c | 23 -----------------------
 1 file changed, 23 deletions(-)
hw/i386/acpi-build.c +0 -0
index 1922868f3401..765409a90eb6 100644

hw/i386/acpi-build.c static void build_q35_isa_bridge(Aml *table) · line 1437

Quoted 1 line
hw/i386/acpi-build.c +0 -0
@@ -1437,15 +1437,6 @@ static void build_q35_isa_bridge(Aml *table)
     aml_append(field, aml_named_field("LPTD", 2));
                                          ^^^^

not related to this patch but it seems that above&co are also unused fields. it was this way in Seabios and probably even earlier wherever it was copied from.

Quoted 23 lines
hw/i386/acpi-build.c +0 -10
     aml_append(dev, field);
 
-    aml_append(dev, aml_operation_region("LPCE", AML_PCI_CONFIG,
-                                         aml_int(0x82), 0x02));
-    /* enable bits */
-    field = aml_field("LPCE", AML_ANY_ACC, AML_NOLOCK, AML_PRESERVE);
-    aml_append(field, aml_named_field("CAEN", 1));
-    aml_append(field, aml_named_field("CBEN", 1));
-    aml_append(field, aml_named_field("LPEN", 1));
-    aml_append(dev, field);
-
     aml_append(scope, dev);
     aml_append(table, scope);
 }
@@ -1469,7 +1460,6 @@ static void build_piix4_isa_bridge(Aml *table)
 {
     Aml *dev;
     Aml *scope;
-    Aml *field;
 
     scope =  aml_scope("_SB.PCI0");
     dev = aml_device("ISA");

hw/i386/acpi-build.c static void build_piix4_isa_bridge(Aml *table) · line 1482

Quoted 5 lines
hw/i386/acpi-build.c +0 -2
@@ -1478,19 +1468,6 @@ static void build_piix4_isa_bridge(Aml *table)
     /* PIIX PCI to ISA irq remapping */
     aml_append(dev, aml_operation_region("P40C", AML_PCI_CONFIG,
                                          aml_int(0x60), 0x04));
-    /* enable bits */
-    field = aml_field("^PX13.P13C", AML_ANY_ACC, AML_NOLOCK, AML_PRESERVE);

^^^ should we drop this as well as it becomes unused?

Quoted 14 lines
hw/i386/acpi-build.c +0 -11
-    /* Offset(0x5f),, 7, */
-    aml_append(field, aml_reserved_field(0x2f8));
-    aml_append(field, aml_reserved_field(7));
-    aml_append(field, aml_named_field("LPEN", 1));
-    /* Offset(0x67),, 3, */
-    aml_append(field, aml_reserved_field(0x38));
-    aml_append(field, aml_reserved_field(3));
-    aml_append(field, aml_named_field("CAEN", 1));
-    aml_append(field, aml_reserved_field(3));
-    aml_append(field, aml_named_field("CBEN", 1));
-    aml_append(dev, field);
 
     aml_append(scope, dev);
     aml_append(table, scope);
#24 lore raw

PATCH v4 13/13 floppy: make isa_fdc_get_drive_max_chs static

In reply to Gerd Hoffmann

acpi aml generator needs this, but it is in floppy code now so we can make the function static.

---
 include/hw/block/fdc.h | 2 --
 hw/block/fdc.c         | 4 ++--
 2 files changed, 2 insertions(+), 4 deletions(-)
include/hw/block/fdc.h +0 -2
index c15ff4c62315..5d71cf972268 100644
@@ -16,7 +16,5 @@ void sun4m_fdctrl_init(qemu_irq irq, hwaddr io_base,
                        DriveInfo **fds, qemu_irq *fdc_tc);
 
 FloppyDriveType isa_fdc_get_drive_type(ISADevice *fdc, int i);
-void isa_fdc_get_drive_max_chs(FloppyDriveType type,
-                               uint8_t *maxc, uint8_t *maxh, uint8_t *maxs);
 
 #endif
hw/block/fdc.c +2 -2
index 40faa088b5f7..499a580b993c 100644
@@ -2744,8 +2744,8 @@ FloppyDriveType isa_fdc_get_drive_type(ISADevice *fdc, int i)
     return isa->state.drives[i].drive;
 }
 
-void isa_fdc_get_drive_max_chs(FloppyDriveType type,
-                               uint8_t *maxc, uint8_t *maxh, uint8_t *maxs)
+static void isa_fdc_get_drive_max_chs(FloppyDriveType type, uint8_t *maxc,
+                                      uint8_t *maxh, uint8_t *maxs)
 {
     const FDFormat *fdf;
 
Signature · 1 line
2.18.4
Reviewed-by on v4 13/13
#25 lore raw

Re: [PATCH v4 13/13] floppy: make isa_fdc_get_drive_max_chs static

Quoted 4 lines · On Tue, 5 May 2020 13:38:43 +0200 Gerd Hoffmann <[email protected]> wrote:

acpi aml generator needs this, but it is in floppy code now so we can make the function static.

Quoted 32 lines
---
 include/hw/block/fdc.h | 2 --
 hw/block/fdc.c         | 4 ++--
 2 files changed, 2 insertions(+), 4 deletions(-)
include/hw/block/fdc.h +0 -2
index c15ff4c62315..5d71cf972268 100644
@@ -16,7 +16,5 @@ void sun4m_fdctrl_init(qemu_irq irq, hwaddr io_base,
                        DriveInfo **fds, qemu_irq *fdc_tc);
 
 FloppyDriveType isa_fdc_get_drive_type(ISADevice *fdc, int i);
-void isa_fdc_get_drive_max_chs(FloppyDriveType type,
-                               uint8_t *maxc, uint8_t *maxh, uint8_t *maxs);
 
 #endif
hw/block/fdc.c +2 -2
index 40faa088b5f7..499a580b993c 100644
@@ -2744,8 +2744,8 @@ FloppyDriveType isa_fdc_get_drive_type(ISADevice *fdc, int i)
     return isa->state.drives[i].drive;
 }
 
-void isa_fdc_get_drive_max_chs(FloppyDriveType type,
-                               uint8_t *maxc, uint8_t *maxh, uint8_t *maxs)
+static void isa_fdc_get_drive_max_chs(FloppyDriveType type, uint8_t *maxc,
+                                      uint8_t *maxh, uint8_t *maxs)
 {
     const FDFormat *fdf;