Skip to contentSkip to conversation

ipmb bridge

DISCUSSION Vijay Khemka 2 participants 3 messages Nov 8, 2019 – Dec 9, 2019

lore
Share & tools
lore
#0 lore raw

Hi Jae,
Current ipmb bridge needs mqueue slave driver which is not upstream. There is a ipmb driver in kernel and our ipmbbridge doesn’t use it. I am in the process of using upstream IPMB driver and want to revise ipmbbridge code as per ipmb driver. Please advise.

Regards
-Vijay

#1 lore raw

Hi Vijay,

Yes, I saw you submitted a change on ipmb kernel driver to make it. Thanks a lot for your effort. Differently from mqueue slave driver, ipmb driver uses ipmb packets instead of raw data stream so the ipmbbridge service could be simplified if we use ipmb driver. I don't think we need to support both mqueue and ipmb drivers in the service so it would be good if we can replace the logic with ipmb driver support in ipmbbridge service.

Thanks,
Jae

Quoted 8 lines · Vijay Khemka

Hi Jae,

Current ipmb bridge needs mqueue slave driver which is not upstream. There is a ipmb driver in kernel and our ipmbbridge doesn’t use it. I am in the process of using upstream IPMB driver and want to revise ipmbbridge code as per ipmb driver. Please advise.

Regards

-Vijay

#2 lore raw

Jae/James,
Can you please review new ipmbbridge application based on upstream driver. I have tested and verified it in our environment.
https://gerrit.openbmc-project.xyz/#/c/openbmc/ipmbbridge/+/27794/

Regards
-Vijay

On 11/8/19, 12:32 PM, "Jae Hyun Yoo" <[email protected]> wrote:

Hi Vijay,

Yes, I saw you submitted a change on ipmb kernel driver to make it. Thanks a lot for your effort. Differently from mqueue slave driver, ipmb driver uses ipmb packets instead of raw data stream so the ipmbbridge service could be simplified if we use ipmb driver. I don't think we need to support both mqueue and ipmb drivers in the service so it would be good if we can replace the logic with ipmb driver support in ipmbbridge service.

Thanks,
Jae

On 11/8/2019 12:18 PM, Vijay Khemka wrote:
> Hi Jae,
>
> Current ipmb bridge needs mqueue slave driver which is not upstream. > There is a ipmb driver in kernel and our ipmbbridge doesn’t use it. I am > in the process of using upstream IPMB driver and want to revise > ipmbbridge code as per ipmb driver. Please advise.
>
> Regards
>
> -Vijay
>