ipmb bridge
Hi Jae,
Current ipmb bridge needs mqueue slave driver which is not upstream. There is a ipmb driver in kernel and our ipmbbridge doesn’t use it. I am in the process of using upstream IPMB driver and want to revise ipmbbridge code as per ipmb driver. Please advise.
Regards
-Vijay
Hi Vijay,
Yes, I saw you submitted a change on ipmb kernel driver to make it. Thanks a lot for your effort. Differently from mqueue slave driver, ipmb driver uses ipmb packets instead of raw data stream so the ipmbbridge service could be simplified if we use ipmb driver. I don't think we need to support both mqueue and ipmb drivers in the service so it would be good if we can replace the logic with ipmb driver support in ipmbbridge service.
Thanks,
Jae
Quoted 8 lines · Vijay Khemka
Hi Jae,
Current ipmb bridge needs mqueue slave driver which is not upstream. There is a ipmb driver in kernel and our ipmbbridge doesn’t use it. I am in the process of using upstream IPMB driver and want to revise ipmbbridge code as per ipmb driver. Please advise.
Regards
-Vijay
Jae/James,
Can you please review new ipmbbridge application based on upstream driver. I have tested and verified it in our environment.
https://gerrit.openbmc-project.xyz/#/c/openbmc/ipmbbridge/+/27794/
Regards
-Vijay
On 11/8/19, 12:32 PM, "Jae Hyun Yoo" <[email protected]> wrote:
Hi Vijay,
Yes, I saw you submitted a change on ipmb kernel driver to make it. Thanks a lot for your effort. Differently from mqueue slave driver, ipmb driver uses ipmb packets instead of raw data stream so the ipmbbridge service could be simplified if we use ipmb driver. I don't think we need to support both mqueue and ipmb drivers in the service so it would be good if we can replace the logic with ipmb driver support in ipmbbridge service.
Thanks,
Jae
On 11/8/2019 12:18 PM, Vijay Khemka wrote:
> Hi Jae,
>
> Current ipmb bridge needs mqueue slave driver which is not upstream. > There is a ipmb driver in kernel and our ipmbbridge doesn’t use it. I am > in the process of using upstream IPMB driver and want to revise > ipmbbridge code as per ipmb driver. Please advise.
>
> Regards
>
> -Vijay
>