NIC inerrupt
Hello,
I want to count the number of times I reach an NIC receive interrupt.
I added a global static variable of type int , and initialized it to 0 ; each time I am in the rx_interrupt of the card I incerement it by one;
I got large , non sensible numbers after one or two seconds;
So for debug I added printk each time I increment it in rx_interrupt.
What I see is that there are unreasonable jumps in the number
for instance , it inceremnts sequntially from 1 to 80,then jums to 4500, increments a little sequentially to 4580, and the jums again to 11000 ;
Is it got to do with it that this is in interrupt? Any idea what it can be ?
(I also tried to declare it as static in the rx_interrupt method and the same happened)
Thnx,
John
_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8. http://join.msn.com/?page=features/junkmail
Quoted 18 lines · John Que
Hello,
I want to count the number of times I reach an NIC receive interrupt.
I added a global static variable of type int , and initialized it to 0 ; each time I am in the
rx_interruptof the card I incerement it by one;
I got large , non sensible numbers after one or two seconds;So for debug I added printk each time I increment it in
rx_interrupt.What I see is that there are unreasonable jumps in the number
for instance , it inceremnts sequntially from 1 to 80,then jums to 4500, increments a little sequentially to 4580, and the jums again to 11000 ;
Quoted 6 lines
Is it got to do with it that this is in interrupt? Any idea what it can be ?
(I also tried to declare it as static in the
rx_interruptmethod and the same happened)
Show your code
Signature · 1 line
vda
Quoted 12 lines · John Que
Hello,
I want to count the number of times I reach an NIC receive interrupt.
I added a global static variable of type int , and initialized it to 0 ; each time I am in the
rx_interruptof the card I incerement it by one;
I got large , non sensible numbers after one or two seconds;So for debug I added printk each time I increment it in
rx_interrupt.
Quoted 7 lines
What I see is that there are unreasonable jumps in the number
for instance , it inceremnts sequntially from 1 to 80,then jums to 4500, increments a little sequentially to 4580, and the jums again to 11000 ;
Is it got to do with it that this is in interrupt? Any idea what it can be ?
You're probably reading the kernel output from syslog. Syslog periodically reads out the printks from the kernel. With the amount of printks you're doing you are probably printing info for about 4500 interrupts between every time syslog checks for new kernel output, while the kernel buffer that is used to store this information can only handle
enough data for 80 interrupts.
--Bart
Am Montag, 19. April 2004 14:46 schrieb John Que:
Quoted 18 lines
Hello,
I want to count the number of times I reach an NIC receive interrupt.
I added a global static variable of type int , and initialized it to 0 ; each time I am in the
rx_interruptof the card I incerement it by one;
I got large , non sensible numbers after one or two seconds;So for debug I added printk each time I increment it in
rx_interrupt.What I see is that there are unreasonable jumps in the number
for instance , it inceremnts sequntially from 1 to 80,then jums to 4500, increments a little sequentially to 4580, and the jums again to 11000 ;
Quoted 6 lines
Is it got to do with it that this is in interrupt? Any idea what it can be ?
(I also tried to declare it as static in the
rx_interruptmethod and the same happened)
Probably you didn't declare your count variable 'volatile'?
Axel
Signature · 7 lines
Humboldt-Universität zu Berlin Institut für Informatik Signalverarbeitung und Mustererkennung Dipl.-Inf. Axel Weiß Rudower Chaussee 25 12489 Berlin-Adlershof +49-30-2093-3050
Quoted 30 lines · On Tue, 20 Apr 2004, Axel [iso-8859-15] Weiß wrote:
Am Montag, 19. April 2004 14:46 schrieb John Que:
Quoted 18 lines
Hello,
I want to count the number of times I reach an NIC receive interrupt.
I added a global static variable of type int , and initialized it to 0 ; each time I am in the
rx_interruptof the card I incerement it by one;
I got large , non sensible numbers after one or two seconds;So for debug I added printk each time I increment it in
rx_interrupt.What I see is that there are unreasonable jumps in the number
for instance , it inceremnts sequntially from 1 to 80,then jums to 4500, increments a little sequentially to 4580, and the jums again to 11000 ;
Quoted 6 lines
Is it got to do with it that this is in interrupt? Any idea what it can be ?
(I also tried to declare it as static in the
rx_interruptmethod and the same happened)Probably you didn't declare your count variable 'volatile'?
Axel
Quoted 8 lines
--
Humboldt-Universität zu Berlin
Institut für Informatik
Signalverarbeitung und Mustererkennung
Dipl.-Inf. Axel Weiß
Rudower Chaussee 25
12489 Berlin-Adlershof
+49-30-2093-3050
How about cat /proc/interrupts. That should tell him how many interrupts the NIC got..
CPU0
0: 123073 IO-APIC-edge timer 1: 1131 IO-APIC-edge keyboard 2: 0 XT-PIC cascade 17: 18550 IO-APIC-level BusLogic BT-958 18: 69272 IO-APIC-level eth0 <---------- NMI: 0 LOC: 123029 ERR: 0 MIS: 0
Do the simple stuff first. Only get compilcated if necessary.
Cheers,
Dick Johnson
Penguin : Linux version 2.4.26 on an i686 machine (5596.77 BogoMips).
Note 96.31% of all statistics are fiction.