Skip to contentSkip to conversation

NIC inerrupt

DISCUSSION John Que 5 participants 5 messages Apr 19, 2004 – Apr 20, 2004

lore
Share & tools
lore

John Que

author
#0 lore raw

Hello,

I want to count the number of times I reach an NIC receive interrupt.

I added a global static variable of type int , and initialized it to 0 ; each time I am in the rx_interrupt of the card I incerement it by one;
I got large , non sensible numbers after one or two seconds;

So for debug I added printk each time I increment it in rx_interrupt.

What I see is that there are unreasonable jumps in the number

for instance , it inceremnts sequntially from 1 to 80,then jums to 4500, increments a little sequentially to 4580, and the jums again to 11000 ;

Is it got to do with it that this is in interrupt? Any idea what it can be ?

(I also tried to declare it as static in the rx_interrupt method and the same happened)

Thnx,
John

_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8. http://join.msn.com/?page=features/junkmail

#1 lore raw
Quoted 18 lines · John Que

Hello,

I want to count the number of times I reach an NIC receive interrupt.

I added a global static variable of type int , and initialized it to 0 ; each time I am in the rx_interrupt of the card I incerement it by one;
I got large , non sensible numbers after one or two seconds;

So for debug I added printk each time I increment it in rx_interrupt.

What I see is that there are unreasonable jumps in the number

for instance , it inceremnts sequntially from 1 to 80,then jums to 4500, increments a little sequentially to 4580, and the jums again to 11000 ;

Quoted 6 lines

Is it got to do with it that this is in interrupt? Any idea what it can be ?

(I also tried to declare it as static in the rx_interrupt method and the same happened)

Show your code

Signature · 1 line
vda
#2 lore raw
In reply to John Que
Quoted 12 lines · John Que

Hello,

I want to count the number of times I reach an NIC receive interrupt.

I added a global static variable of type int , and initialized it to 0 ; each time I am in the rx_interrupt of the card I incerement it by one;
I got large , non sensible numbers after one or two seconds;

So for debug I added printk each time I increment it in rx_interrupt.

Quoted 7 lines

What I see is that there are unreasonable jumps in the number

for instance , it inceremnts sequntially from 1 to 80,then jums to 4500, increments a little sequentially to 4580, and the jums again to 11000 ;

Is it got to do with it that this is in interrupt? Any idea what it can be ?

You're probably reading the kernel output from syslog. Syslog periodically reads out the printks from the kernel. With the amount of printks you're doing you are probably printing info for about 4500 interrupts between every time syslog checks for new kernel output, while the kernel buffer that is used to store this information can only handle
enough data for 80 interrupts.

--Bart

#3 lore raw
In reply to John Que

Am Montag, 19. April 2004 14:46 schrieb John Que:

Quoted 18 lines

Hello,

I want to count the number of times I reach an NIC receive interrupt.

I added a global static variable of type int , and initialized it to 0 ; each time I am in the rx_interrupt of the card I incerement it by one;
I got large , non sensible numbers after one or two seconds;

So for debug I added printk each time I increment it in rx_interrupt.

What I see is that there are unreasonable jumps in the number

for instance , it inceremnts sequntially from 1 to 80,then jums to 4500, increments a little sequentially to 4580, and the jums again to 11000 ;

Quoted 6 lines

Is it got to do with it that this is in interrupt? Any idea what it can be ?

(I also tried to declare it as static in the rx_interrupt method and the same happened)

Probably you didn't declare your count variable 'volatile'?

Axel

Signature · 7 lines
Humboldt-Universität zu Berlin
Institut für Informatik
Signalverarbeitung und Mustererkennung
Dipl.-Inf. Axel Weiß
Rudower Chaussee 25
12489 Berlin-Adlershof
+49-30-2093-3050
#4 lore raw
Quoted 30 lines · On Tue, 20 Apr 2004, Axel [iso-8859-15] Weiß wrote:

Am Montag, 19. April 2004 14:46 schrieb John Que:

Quoted 18 lines

Hello,

I want to count the number of times I reach an NIC receive interrupt.

I added a global static variable of type int , and initialized it to 0 ; each time I am in the rx_interrupt of the card I incerement it by one;
I got large , non sensible numbers after one or two seconds;

So for debug I added printk each time I increment it in rx_interrupt.

What I see is that there are unreasonable jumps in the number

for instance , it inceremnts sequntially from 1 to 80,then jums to 4500, increments a little sequentially to 4580, and the jums again to 11000 ;

Quoted 6 lines

Is it got to do with it that this is in interrupt? Any idea what it can be ?

(I also tried to declare it as static in the rx_interrupt method and the same happened)

Probably you didn't declare your count variable 'volatile'?

Axel

Quoted 8 lines

--
Humboldt-Universität zu Berlin
Institut für Informatik
Signalverarbeitung und Mustererkennung
Dipl.-Inf. Axel Weiß
Rudower Chaussee 25
12489 Berlin-Adlershof
+49-30-2093-3050

How about cat /proc/interrupts. That should tell him how many interrupts the NIC got..

CPU0

  0:     123073    IO-APIC-edge  timer
  1:       1131    IO-APIC-edge  keyboard
  2:          0          XT-PIC  cascade
 17:      18550   IO-APIC-level  BusLogic BT-958
 18:      69272   IO-APIC-level  eth0	<----------
NMI:          0
LOC:     123029
ERR:          0
MIS:          0

Do the simple stuff first. Only get compilcated if necessary.

Cheers,
Dick Johnson
Penguin : Linux version 2.4.26 on an i686 machine (5596.77 BogoMips).
Note 96.31% of all statistics are fiction.